| // SPDX-License-Identifier: GPL-2.0-only |
| /* |
| * PS3 Logical Performance Monitor. |
| * |
| * Copyright (C) 2007 Sony Computer Entertainment Inc. |
| * Copyright 2007 Sony Corp. |
| */ |
| |
| #include <linux/slab.h> |
| #include <linux/kernel.h> |
| #include <linux/module.h> |
| #include <linux/interrupt.h> |
| #include <linux/uaccess.h> |
| #include <asm/smp.h> |
| #include <asm/time.h> |
| #include <asm/ps3.h> |
| #include <asm/lv1call.h> |
| #include <asm/cell-pmu.h> |
| |
| |
| /* BOOKMARK tag macros */ |
| #define PS3_PM_BOOKMARK_START 0x8000000000000000ULL |
| #define PS3_PM_BOOKMARK_STOP 0x4000000000000000ULL |
| #define PS3_PM_BOOKMARK_TAG_KERNEL 0x1000000000000000ULL |
| #define PS3_PM_BOOKMARK_TAG_USER 0x3000000000000000ULL |
| #define PS3_PM_BOOKMARK_TAG_MASK_HI 0xF000000000000000ULL |
| #define PS3_PM_BOOKMARK_TAG_MASK_LO 0x0F00000000000000ULL |
| |
| /* CBE PM CONTROL register macros */ |
| #define PS3_PM_CONTROL_PPU_TH0_BOOKMARK 0x00001000 |
| #define PS3_PM_CONTROL_PPU_TH1_BOOKMARK 0x00000800 |
| #define PS3_PM_CONTROL_PPU_COUNT_MODE_MASK 0x000C0000 |
| #define PS3_PM_CONTROL_PPU_COUNT_MODE_PROBLEM 0x00080000 |
| #define PS3_WRITE_PM_MASK 0xFFFFFFFFFFFFFFFFULL |
| |
| /* CBE PM START STOP register macros */ |
| #define PS3_PM_START_STOP_PPU_TH0_BOOKMARK_START 0x02000000 |
| #define PS3_PM_START_STOP_PPU_TH1_BOOKMARK_START 0x01000000 |
| #define PS3_PM_START_STOP_PPU_TH0_BOOKMARK_STOP 0x00020000 |
| #define PS3_PM_START_STOP_PPU_TH1_BOOKMARK_STOP 0x00010000 |
| #define PS3_PM_START_STOP_START_MASK 0xFF000000 |
| #define PS3_PM_START_STOP_STOP_MASK 0x00FF0000 |
| |
| /* CBE PM COUNTER register macres */ |
| #define PS3_PM_COUNTER_MASK_HI 0xFFFFFFFF00000000ULL |
| #define PS3_PM_COUNTER_MASK_LO 0x00000000FFFFFFFFULL |
| |
| /* BASE SIGNAL GROUP NUMBER macros */ |
| #define PM_ISLAND2_BASE_SIGNAL_GROUP_NUMBER 0 |
| #define PM_ISLAND2_SIGNAL_GROUP_NUMBER1 6 |
| #define PM_ISLAND2_SIGNAL_GROUP_NUMBER2 7 |
| #define PM_ISLAND3_BASE_SIGNAL_GROUP_NUMBER 7 |
| #define PM_ISLAND4_BASE_SIGNAL_GROUP_NUMBER 15 |
| #define PM_SPU_TRIGGER_SIGNAL_GROUP_NUMBER 17 |
| #define PM_SPU_EVENT_SIGNAL_GROUP_NUMBER 18 |
| #define PM_ISLAND5_BASE_SIGNAL_GROUP_NUMBER 18 |
| #define PM_ISLAND6_BASE_SIGNAL_GROUP_NUMBER 24 |
| #define PM_ISLAND7_BASE_SIGNAL_GROUP_NUMBER 49 |
| #define PM_ISLAND8_BASE_SIGNAL_GROUP_NUMBER 52 |
| #define PM_SIG_GROUP_SPU 41 |
| #define PM_SIG_GROUP_SPU_TRIGGER 42 |
| #define PM_SIG_GROUP_SPU_EVENT 43 |
| #define PM_SIG_GROUP_MFC_MAX 60 |
| |
| /** |
| * struct ps3_lpm_shadow_regs - Performance monitor shadow registers. |
| * |
| * @pm_control: Shadow of the processor's pm_control register. |
| * @pm_start_stop: Shadow of the processor's pm_start_stop register. |
| * @group_control: Shadow of the processor's group_control register. |
| * @debug_bus_control: Shadow of the processor's debug_bus_control register. |
| * |
| * The logical performance monitor provides a write-only interface to |
| * these processor registers. These shadow variables cache the processor |
| * register values for reading. |
| * |
| * The initial value of the shadow registers at lpm creation is |
| * PS3_LPM_SHADOW_REG_INIT. |
| */ |
| |
| struct ps3_lpm_shadow_regs { |
| u64 pm_control; |
| u64 pm_start_stop; |
| u64 group_control; |
| u64 debug_bus_control; |
| }; |
| |
| #define PS3_LPM_SHADOW_REG_INIT 0xFFFFFFFF00000000ULL |
| |
| /** |
| * struct ps3_lpm_priv - Private lpm device data. |
| * |
| * @open: An atomic variable indicating the lpm driver has been opened. |
| * @rights: The lpm rigths granted by the system policy module. A logical |
| * OR of enum ps3_lpm_rights. |
| * @node_id: The node id of a BE processor whose performance monitor this |
| * lpar has the right to use. |
| * @pu_id: The lv1 id of the logical PU. |
| * @lpm_id: The lv1 id of this lpm instance. |
| * @outlet_id: The outlet created by lv1 for this lpm instance. |
| * @tb_count: The number of bytes of data held in the lv1 trace buffer. |
| * @tb_cache: Kernel buffer to receive the data from the lv1 trace buffer. |
| * Must be 128 byte aligned. |
| * @tb_cache_size: Size of the kernel @tb_cache buffer. Must be 128 byte |
| * aligned. |
| * @tb_cache_internal: An unaligned buffer allocated by this driver to be |
| * used for the trace buffer cache when ps3_lpm_open() is called with a |
| * NULL tb_cache argument. Otherwise unused. |
| * @shadow: Processor register shadow of type struct ps3_lpm_shadow_regs. |
| * @sbd: The struct ps3_system_bus_device attached to this driver. |
| * |
| * The trace buffer is a buffer allocated and used internally to the lv1 |
| * hypervisor to collect trace data. The trace buffer cache is a guest |
| * buffer that accepts the trace data from the trace buffer. |
| */ |
| |
| struct ps3_lpm_priv { |
| atomic_t open; |
| u64 rights; |
| u64 node_id; |
| u64 pu_id; |
| u64 lpm_id; |
| u64 outlet_id; |
| u64 tb_count; |
| void *tb_cache; |
| u64 tb_cache_size; |
| void *tb_cache_internal; |
| struct ps3_lpm_shadow_regs shadow; |
| struct ps3_system_bus_device *sbd; |
| }; |
| |
| enum { |
| PS3_LPM_DEFAULT_TB_CACHE_SIZE = 0x4000, |
| }; |
| |
| /** |
| * lpm_priv - Static instance of the lpm data. |
| * |
| * Since the exported routines don't support the notion of a device |
| * instance we need to hold the instance in this static variable |
| * and then only allow at most one instance at a time to be created. |
| */ |
| |
| static struct ps3_lpm_priv *lpm_priv; |
| |
| static struct device *sbd_core(void) |
| { |
| BUG_ON(!lpm_priv || !lpm_priv->sbd); |
| return &lpm_priv->sbd->core; |
| } |
| |
| /** |
| * use_start_stop_bookmark - Enable the PPU bookmark trace. |
| * |
| * And it enables PPU bookmark triggers ONLY if the other triggers are not set. |
| * The start/stop bookmarks are inserted at ps3_enable_pm() and ps3_disable_pm() |
| * to start/stop LPM. |
| * |
| * Used to get good quality of the performance counter. |
| */ |
| |
| enum {use_start_stop_bookmark = 1,}; |
| |
| void ps3_set_bookmark(u64 bookmark) |
| { |
| /* |
| * As per the PPE book IV, to avoid bookmark loss there must |
| * not be a traced branch within 10 cycles of setting the |
| * SPRN_BKMK register. The actual text is unclear if 'within' |
| * includes cycles before the call. |
| */ |
| |
| asm volatile("nop;nop;nop;nop;nop;nop;nop;nop;nop;"); |
| mtspr(SPRN_BKMK, bookmark); |
| asm volatile("nop;nop;nop;nop;nop;nop;nop;nop;nop;"); |
| } |
| EXPORT_SYMBOL_GPL(ps3_set_bookmark); |
| |
| void ps3_set_pm_bookmark(u64 tag, u64 incident, u64 th_id) |
| { |
| u64 bookmark; |
| |
| bookmark = (get_tb() & 0x00000000FFFFFFFFULL) | |
| PS3_PM_BOOKMARK_TAG_KERNEL; |
| bookmark = ((tag << 56) & PS3_PM_BOOKMARK_TAG_MASK_LO) | |
| (incident << 48) | (th_id << 32) | bookmark; |
| ps3_set_bookmark(bookmark); |
| } |
| EXPORT_SYMBOL_GPL(ps3_set_pm_bookmark); |
| |
| /** |
| * ps3_read_phys_ctr - Read physical counter registers. |
| * |
| * Each physical counter can act as one 32 bit counter or as two 16 bit |
| * counters. |
| */ |
| |
| u32 ps3_read_phys_ctr(u32 cpu, u32 phys_ctr) |
| { |
| int result; |
| u64 counter0415; |
| u64 counter2637; |
| |
| if (phys_ctr >= NR_PHYS_CTRS) { |
| dev_dbg(sbd_core(), "%s:%u: phys_ctr too big: %u\n", __func__, |
| __LINE__, phys_ctr); |
| return 0; |
| } |
| |
| result = lv1_set_lpm_counter(lpm_priv->lpm_id, 0, 0, 0, 0, &counter0415, |
| &counter2637); |
| if (result) { |
| dev_err(sbd_core(), "%s:%u: lv1_set_lpm_counter failed: " |
| "phys_ctr %u, %s\n", __func__, __LINE__, phys_ctr, |
| ps3_result(result)); |
| return 0; |
| } |
| |
| switch (phys_ctr) { |
| case 0: |
| return counter0415 >> 32; |
| case 1: |
| return counter0415 & PS3_PM_COUNTER_MASK_LO; |
| case 2: |
| return counter2637 >> 32; |
| case 3: |
| return counter2637 & PS3_PM_COUNTER_MASK_LO; |
| default: |
| BUG(); |
| } |
| return 0; |
| } |
| EXPORT_SYMBOL_GPL(ps3_read_phys_ctr); |
| |
| /** |
| * ps3_write_phys_ctr - Write physical counter registers. |
| * |
| * Each physical counter can act as one 32 bit counter or as two 16 bit |
| * counters. |
| */ |
| |
| void ps3_write_phys_ctr(u32 cpu, u32 phys_ctr, u32 val) |
| { |
| u64 counter0415; |
| u64 counter0415_mask; |
| u64 counter2637; |
| u64 counter2637_mask; |
| int result; |
| |
| if (phys_ctr >= NR_PHYS_CTRS) { |
| dev_dbg(sbd_core(), "%s:%u: phys_ctr too big: %u\n", __func__, |
| __LINE__, phys_ctr); |
| return; |
| } |
| |
| switch (phys_ctr) { |
| case 0: |
| counter0415 = (u64)val << 32; |
| counter0415_mask = PS3_PM_COUNTER_MASK_HI; |
| counter2637 = 0x0; |
| counter2637_mask = 0x0; |
| break; |
| case 1: |
| counter0415 = (u64)val; |
| counter0415_mask = PS3_PM_COUNTER_MASK_LO; |
| counter2637 = 0x0; |
| counter2637_mask = 0x0; |
| break; |
| case 2: |
| counter0415 = 0x0; |
| counter0415_mask = 0x0; |
| counter2637 = (u64)val << 32; |
| counter2637_mask = PS3_PM_COUNTER_MASK_HI; |
| break; |
| case 3: |
| counter0415 = 0x0; |
| counter0415_mask = 0x0; |
| counter2637 = (u64)val; |
| counter2637_mask = PS3_PM_COUNTER_MASK_LO; |
| break; |
| default: |
| BUG(); |
| } |
| |
| result = lv1_set_lpm_counter(lpm_priv->lpm_id, |
| counter0415, counter0415_mask, |
| counter2637, counter2637_mask, |
| &counter0415, &counter2637); |
| if (result) |
| dev_err(sbd_core(), "%s:%u: lv1_set_lpm_counter failed: " |
| "phys_ctr %u, val %u, %s\n", __func__, __LINE__, |
| phys_ctr, val, ps3_result(result)); |
| } |
| EXPORT_SYMBOL_GPL(ps3_write_phys_ctr); |
| |
| /** |
| * ps3_read_ctr - Read counter. |
| * |
| * Read 16 or 32 bits depending on the current size of the counter. |
| * Counters 4, 5, 6 & 7 are always 16 bit. |
| */ |
| |
| u32 ps3_read_ctr(u32 cpu, u32 ctr) |
| { |
| u32 val; |
| u32 phys_ctr = ctr & (NR_PHYS_CTRS - 1); |
| |
| val = ps3_read_phys_ctr(cpu, phys_ctr); |
| |
| if (ps3_get_ctr_size(cpu, phys_ctr) == 16) |
| val = (ctr < NR_PHYS_CTRS) ? (val >> 16) : (val & 0xffff); |
| |
| return val; |
| } |
| EXPORT_SYMBOL_GPL(ps3_read_ctr); |
| |
| /** |
| * ps3_write_ctr - Write counter. |
| * |
| * Write 16 or 32 bits depending on the current size of the counter. |
| * Counters 4, 5, 6 & 7 are always 16 bit. |
| */ |
| |
| void ps3_write_ctr(u32 cpu, u32 ctr, u32 val) |
| { |
| u32 phys_ctr; |
| u32 phys_val; |
| |
| phys_ctr = ctr & (NR_PHYS_CTRS - 1); |
| |
| if (ps3_get_ctr_size(cpu, phys_ctr) == 16) { |
| phys_val = ps3_read_phys_ctr(cpu, phys_ctr); |
| |
| if (ctr < NR_PHYS_CTRS) |
| val = (val << 16) | (phys_val & 0xffff); |
| else |
| val = (val & 0xffff) | (phys_val & 0xffff0000); |
| } |
| |
| ps3_write_phys_ctr(cpu, phys_ctr, val); |
| } |
| EXPORT_SYMBOL_GPL(ps3_write_ctr); |
| |
| /** |
| * ps3_read_pm07_control - Read counter control registers. |
| * |
| * Each logical counter has a corresponding control register. |
| */ |
| |
| u32 ps3_read_pm07_control(u32 cpu, u32 ctr) |
| { |
| return 0; |
| } |
| EXPORT_SYMBOL_GPL(ps3_read_pm07_control); |
| |
| /** |
| * ps3_write_pm07_control - Write counter control registers. |
| * |
| * Each logical counter has a corresponding control register. |
| */ |
| |
| void ps3_write_pm07_control(u32 cpu, u32 ctr, u32 val) |
| { |
| int result; |
| static const u64 mask = 0xFFFFFFFFFFFFFFFFULL; |
| u64 old_value; |
| |
| if (ctr >= NR_CTRS) { |
| dev_dbg(sbd_core(), "%s:%u: ctr too big: %u\n", __func__, |
| __LINE__, ctr); |
| return; |
| } |
| |
| result = lv1_set_lpm_counter_control(lpm_priv->lpm_id, ctr, val, mask, |
| &old_value); |
| if (result) |
| dev_err(sbd_core(), "%s:%u: lv1_set_lpm_counter_control " |
| "failed: ctr %u, %s\n", __func__, __LINE__, ctr, |
| ps3_result(result)); |
| } |
| EXPORT_SYMBOL_GPL(ps3_write_pm07_control); |
| |
| /** |
| * ps3_read_pm - Read Other LPM control registers. |
| */ |
| |
| u32 ps3_read_pm(u32 cpu, enum pm_reg_name reg) |
| { |
| int result = 0; |
| u64 val = 0; |
| |
| switch (reg) { |
| case pm_control: |
| return lpm_priv->shadow.pm_control; |
| case trace_address: |
| return CBE_PM_TRACE_BUF_EMPTY; |
| case pm_start_stop: |
| return lpm_priv->shadow.pm_start_stop; |
| case pm_interval: |
| result = lv1_set_lpm_interval(lpm_priv->lpm_id, 0, 0, &val); |
| if (result) { |
| val = 0; |
| dev_dbg(sbd_core(), "%s:%u: lv1 set_interval failed: " |
| "reg %u, %s\n", __func__, __LINE__, reg, |
| ps3_result(result)); |
| } |
| return (u32)val; |
| case group_control: |
| return lpm_priv->shadow.group_control; |
| case debug_bus_control: |
| return lpm_priv->shadow.debug_bus_control; |
| case pm_status: |
| result = lv1_get_lpm_interrupt_status(lpm_priv->lpm_id, |
| &val); |
| if (result) { |
| val = 0; |
| dev_dbg(sbd_core(), "%s:%u: lv1 get_lpm_status failed: " |
| "reg %u, %s\n", __func__, __LINE__, reg, |
| ps3_result(result)); |
| } |
| return (u32)val; |
| case ext_tr_timer: |
| return 0; |
| default: |
| dev_dbg(sbd_core(), "%s:%u: unknown reg: %d\n", __func__, |
| __LINE__, reg); |
| BUG(); |
| break; |
| } |
| |
| return 0; |
| } |
| EXPORT_SYMBOL_GPL(ps3_read_pm); |
| |
| /** |
| * ps3_write_pm - Write Other LPM control registers. |
| */ |
| |
| void ps3_write_pm(u32 cpu, enum pm_reg_name reg, u32 val) |
| { |
| int result = 0; |
| u64 dummy; |
| |
| switch (reg) { |
| case group_control: |
| if (val != lpm_priv->shadow.group_control) |
| result = lv1_set_lpm_group_control(lpm_priv->lpm_id, |
| val, |
| PS3_WRITE_PM_MASK, |
| &dummy); |
| lpm_priv->shadow.group_control = val; |
| break; |
| case debug_bus_control: |
| if (val != lpm_priv->shadow.debug_bus_control) |
| result = lv1_set_lpm_debug_bus_control(lpm_priv->lpm_id, |
| val, |
| PS3_WRITE_PM_MASK, |
| &dummy); |
| lpm_priv->shadow.debug_bus_control = val; |
| break; |
| case pm_control: |
| if (use_start_stop_bookmark) |
| val |= (PS3_PM_CONTROL_PPU_TH0_BOOKMARK | |
| PS3_PM_CONTROL_PPU_TH1_BOOKMARK); |
| if (val != lpm_priv->shadow.pm_control) |
| result = lv1_set_lpm_general_control(lpm_priv->lpm_id, |
| val, |
| PS3_WRITE_PM_MASK, |
| 0, 0, &dummy, |
| &dummy); |
| lpm_priv->shadow.pm_control = val; |
| break; |
| case pm_interval: |
| result = lv1_set_lpm_interval(lpm_priv->lpm_id, val, |
| PS3_WRITE_PM_MASK, &dummy); |
| break; |
| case pm_start_stop: |
| if (val != lpm_priv->shadow.pm_start_stop) |
| result = lv1_set_lpm_trigger_control(lpm_priv->lpm_id, |
| val, |
| PS3_WRITE_PM_MASK, |
| &dummy); |
| lpm_priv->shadow.pm_start_stop = val; |
| break; |
| case trace_address: |
| case ext_tr_timer: |
| case pm_status: |
| break; |
| default: |
| dev_dbg(sbd_core(), "%s:%u: unknown reg: %d\n", __func__, |
| __LINE__, reg); |
| BUG(); |
| break; |
| } |
| |
| if (result) |
| dev_err(sbd_core(), "%s:%u: lv1 set_control failed: " |
| "reg %u, %s\n", __func__, __LINE__, reg, |
| ps3_result(result)); |
| } |
| EXPORT_SYMBOL_GPL(ps3_write_pm); |
| |
| /** |
| * ps3_get_ctr_size - Get the size of a physical counter. |
| * |
| * Returns either 16 or 32. |
| */ |
| |
| u32 ps3_get_ctr_size(u32 cpu, u32 phys_ctr) |
| { |
| u32 pm_ctrl; |
| |
| if (phys_ctr >= NR_PHYS_CTRS) { |
| dev_dbg(sbd_core(), "%s:%u: phys_ctr too big: %u\n", __func__, |
| __LINE__, phys_ctr); |
| return 0; |
| } |
| |
| pm_ctrl = ps3_read_pm(cpu, pm_control); |
| return (pm_ctrl & CBE_PM_16BIT_CTR(phys_ctr)) ? 16 : 32; |
| } |
| EXPORT_SYMBOL_GPL(ps3_get_ctr_size); |
| |
| /** |
| * ps3_set_ctr_size - Set the size of a physical counter to 16 or 32 bits. |
| */ |
| |
| void ps3_set_ctr_size(u32 cpu, u32 phys_ctr, u32 ctr_size) |
| { |
| u32 pm_ctrl; |
| |
| if (phys_ctr >= NR_PHYS_CTRS) { |
| dev_dbg(sbd_core(), "%s:%u: phys_ctr too big: %u\n", __func__, |
| __LINE__, phys_ctr); |
| return; |
| } |
| |
| pm_ctrl = ps3_read_pm(cpu, pm_control); |
| |
| switch (ctr_size) { |
| case 16: |
| pm_ctrl |= CBE_PM_16BIT_CTR(phys_ctr); |
| ps3_write_pm(cpu, pm_control, pm_ctrl); |
| break; |
| |
| case 32: |
| pm_ctrl &= ~CBE_PM_16BIT_CTR(phys_ctr); |
| ps3_write_pm(cpu, pm_control, pm_ctrl); |
| break; |
| default: |
| BUG(); |
| } |
| } |
| EXPORT_SYMBOL_GPL(ps3_set_ctr_size); |
| |
| static u64 pm_translate_signal_group_number_on_island2(u64 subgroup) |
| { |
| |
| if (subgroup == 2) |
| subgroup = 3; |
| |
| if (subgroup <= 6) |
| return PM_ISLAND2_BASE_SIGNAL_GROUP_NUMBER + subgroup; |
| else if (subgroup == 7) |
| return PM_ISLAND2_SIGNAL_GROUP_NUMBER1; |
| else |
| return PM_ISLAND2_SIGNAL_GROUP_NUMBER2; |
| } |
| |
| static u64 pm_translate_signal_group_number_on_island3(u64 subgroup) |
| { |
| |
| switch (subgroup) { |
| case 2: |
| case 3: |
| case 4: |
| subgroup += 2; |
| break; |
| case 5: |
| subgroup = 8; |
| break; |
| default: |
| break; |
| } |
| return PM_ISLAND3_BASE_SIGNAL_GROUP_NUMBER + subgroup; |
| } |
| |
| static u64 pm_translate_signal_group_number_on_island4(u64 subgroup) |
| { |
| return PM_ISLAND4_BASE_SIGNAL_GROUP_NUMBER + subgroup; |
| } |
| |
| static u64 pm_translate_signal_group_number_on_island5(u64 subgroup) |
| { |
| |
| switch (subgroup) { |
| case 3: |
| subgroup = 4; |
| break; |
| case 4: |
| subgroup = 6; |
| break; |
| default: |
| break; |
| } |
| return PM_ISLAND5_BASE_SIGNAL_GROUP_NUMBER + subgroup; |
| } |
| |
| static u64 pm_translate_signal_group_number_on_island6(u64 subgroup, |
| u64 subsubgroup) |
| { |
| switch (subgroup) { |
| case 3: |
| case 4: |
| case 5: |
| subgroup += 1; |
| break; |
| default: |
| break; |
| } |
| |
| switch (subsubgroup) { |
| case 4: |
| case 5: |
| case 6: |
| subsubgroup += 2; |
| break; |
| case 7: |
| case 8: |
| case 9: |
| case 10: |
| subsubgroup += 4; |
| break; |
| case 11: |
| case 12: |
| case 13: |
| subsubgroup += 5; |
| break; |
| default: |
| break; |
| } |
| |
| if (subgroup <= 5) |
| return (PM_ISLAND6_BASE_SIGNAL_GROUP_NUMBER + subgroup); |
| else |
| return (PM_ISLAND6_BASE_SIGNAL_GROUP_NUMBER + subgroup |
| + subsubgroup - 1); |
| } |
| |
| static u64 pm_translate_signal_group_number_on_island7(u64 subgroup) |
| { |
| return PM_ISLAND7_BASE_SIGNAL_GROUP_NUMBER + subgroup; |
| } |
| |
| static u64 pm_translate_signal_group_number_on_island8(u64 subgroup) |
| { |
| return PM_ISLAND8_BASE_SIGNAL_GROUP_NUMBER + subgroup; |
| } |
| |
| static u64 pm_signal_group_to_ps3_lv1_signal_group(u64 group) |
| { |
| u64 island; |
| u64 subgroup; |
| u64 subsubgroup; |
| |
| subgroup = 0; |
| subsubgroup = 0; |
| island = 0; |
| if (group < 1000) { |
| if (group < 100) { |
| if (20 <= group && group < 30) { |
| island = 2; |
| subgroup = group - 20; |
| } else if (30 <= group && group < 40) { |
| island = 3; |
| subgroup = group - 30; |
| } else if (40 <= group && group < 50) { |
| island = 4; |
| subgroup = group - 40; |
| } else if (50 <= group && group < 60) { |
| island = 5; |
| subgroup = group - 50; |
| } else if (60 <= group && group < 70) { |
| island = 6; |
| subgroup = group - 60; |
| } else if (70 <= group && group < 80) { |
| island = 7; |
| subgroup = group - 70; |
| } else if (80 <= group && group < 90) { |
| island = 8; |
| subgroup = group - 80; |
| } |
| } else if (200 <= group && group < 300) { |
| island = 2; |
| subgroup = group - 200; |
| } else if (600 <= group && group < 700) { |
| island = 6; |
| subgroup = 5; |
| subsubgroup = group - 650; |
| } |
| } else if (6000 <= group && group < 7000) { |
| island = 6; |
| subgroup = 5; |
| subsubgroup = group - 6500; |
| } |
| |
| switch (island) { |
| case 2: |
| return pm_translate_signal_group_number_on_island2(subgroup); |
| case 3: |
| return pm_translate_signal_group_number_on_island3(subgroup); |
| case 4: |
| return pm_translate_signal_group_number_on_island4(subgroup); |
| case 5: |
| return pm_translate_signal_group_number_on_island5(subgroup); |
| case 6: |
| return pm_translate_signal_group_number_on_island6(subgroup, |
| subsubgroup); |
| case 7: |
| return pm_translate_signal_group_number_on_island7(subgroup); |
| case 8: |
| return pm_translate_signal_group_number_on_island8(subgroup); |
| default: |
| dev_dbg(sbd_core(), "%s:%u: island not found: %llu\n", __func__, |
| __LINE__, group); |
| BUG(); |
| break; |
| } |
| return 0; |
| } |
| |
| static u64 pm_bus_word_to_ps3_lv1_bus_word(u8 word) |
| { |
| |
| switch (word) { |
| case 1: |
| return 0xF000; |
| case 2: |
| return 0x0F00; |
| case 4: |
| return 0x00F0; |
| case 8: |
| default: |
| return 0x000F; |
| } |
| } |
| |
| static int __ps3_set_signal(u64 lv1_signal_group, u64 bus_select, |
| u64 signal_select, u64 attr1, u64 attr2, u64 attr3) |
| { |
| int ret; |
| |
| ret = lv1_set_lpm_signal(lpm_priv->lpm_id, lv1_signal_group, bus_select, |
| signal_select, attr1, attr2, attr3); |
| if (ret) |
| dev_err(sbd_core(), |
| "%s:%u: error:%d 0x%llx 0x%llx 0x%llx 0x%llx 0x%llx 0x%llx\n", |
| __func__, __LINE__, ret, lv1_signal_group, bus_select, |
| signal_select, attr1, attr2, attr3); |
| |
| return ret; |
| } |
| |
| int ps3_set_signal(u64 signal_group, u8 signal_bit, u16 sub_unit, |
| u8 bus_word) |
| { |
| int ret; |
| u64 lv1_signal_group; |
| u64 bus_select; |
| u64 signal_select; |
| u64 attr1, attr2, attr3; |
| |
| if (signal_group == 0) |
| return __ps3_set_signal(0, 0, 0, 0, 0, 0); |
| |
| lv1_signal_group = |
| pm_signal_group_to_ps3_lv1_signal_group(signal_group); |
| bus_select = pm_bus_word_to_ps3_lv1_bus_word(bus_word); |
| |
| switch (signal_group) { |
| case PM_SIG_GROUP_SPU_TRIGGER: |
| signal_select = 1; |
| signal_select = signal_select << (63 - signal_bit); |
| break; |
| case PM_SIG_GROUP_SPU_EVENT: |
| signal_select = 1; |
| signal_select = (signal_select << (63 - signal_bit)) | 0x3; |
| break; |
| default: |
| signal_select = 0; |
| break; |
| } |
| |
| /* |
| * 0: physical object. |
| * 1: logical object. |
| * This parameter is only used for the PPE and SPE signals. |
| */ |
| attr1 = 1; |
| |
| /* |
| * This parameter is used to specify the target physical/logical |
| * PPE/SPE object. |
| */ |
| if (PM_SIG_GROUP_SPU <= signal_group && |
| signal_group < PM_SIG_GROUP_MFC_MAX) |
| attr2 = sub_unit; |
| else |
| attr2 = lpm_priv->pu_id; |
| |
| /* |
| * This parameter is only used for setting the SPE signal. |
| */ |
| attr3 = 0; |
| |
| ret = __ps3_set_signal(lv1_signal_group, bus_select, signal_select, |
| attr1, attr2, attr3); |
| if (ret) |
| dev_err(sbd_core(), "%s:%u: __ps3_set_signal failed: %d\n", |
| __func__, __LINE__, ret); |
| |
| return ret; |
| } |
| EXPORT_SYMBOL_GPL(ps3_set_signal); |
| |
| u32 ps3_get_hw_thread_id(int cpu) |
| { |
| return get_hard_smp_processor_id(cpu); |
| } |
| EXPORT_SYMBOL_GPL(ps3_get_hw_thread_id); |
| |
| /** |
| * ps3_enable_pm - Enable the entire performance monitoring unit. |
| * |
| * When we enable the LPM, all pending writes to counters get committed. |
| */ |
| |
| void ps3_enable_pm(u32 cpu) |
| { |
| int result; |
| u64 tmp; |
| int insert_bookmark = 0; |
| |
| lpm_priv->tb_count = 0; |
| |
| if (use_start_stop_bookmark) { |
| if (!(lpm_priv->shadow.pm_start_stop & |
| (PS3_PM_START_STOP_START_MASK |
| | PS3_PM_START_STOP_STOP_MASK))) { |
| result = lv1_set_lpm_trigger_control(lpm_priv->lpm_id, |
| (PS3_PM_START_STOP_PPU_TH0_BOOKMARK_START | |
| PS3_PM_START_STOP_PPU_TH1_BOOKMARK_START | |
| PS3_PM_START_STOP_PPU_TH0_BOOKMARK_STOP | |
| PS3_PM_START_STOP_PPU_TH1_BOOKMARK_STOP), |
| 0xFFFFFFFFFFFFFFFFULL, &tmp); |
| |
| if (result) |
| dev_err(sbd_core(), "%s:%u: " |
| "lv1_set_lpm_trigger_control failed: " |
| "%s\n", __func__, __LINE__, |
| ps3_result(result)); |
| |
| insert_bookmark = !result; |
| } |
| } |
| |
| result = lv1_start_lpm(lpm_priv->lpm_id); |
| |
| if (result) |
| dev_err(sbd_core(), "%s:%u: lv1_start_lpm failed: %s\n", |
| __func__, __LINE__, ps3_result(result)); |
| |
| if (use_start_stop_bookmark && !result && insert_bookmark) |
| ps3_set_bookmark(get_tb() | PS3_PM_BOOKMARK_START); |
| } |
| EXPORT_SYMBOL_GPL(ps3_enable_pm); |
| |
| /** |
| * ps3_disable_pm - Disable the entire performance monitoring unit. |
| */ |
| |
| void ps3_disable_pm(u32 cpu) |
| { |
| int result; |
| u64 tmp; |
| |
| ps3_set_bookmark(get_tb() | PS3_PM_BOOKMARK_STOP); |
| |
| result = lv1_stop_lpm(lpm_priv->lpm_id, &tmp); |
| |
| if (result) { |
| if (result != LV1_WRONG_STATE) |
| dev_err(sbd_core(), "%s:%u: lv1_stop_lpm failed: %s\n", |
| __func__, __LINE__, ps3_result(result)); |
| return; |
| } |
| |
| lpm_priv->tb_count = tmp; |
| |
| dev_dbg(sbd_core(), "%s:%u: tb_count %llu (%llxh)\n", __func__, __LINE__, |
| lpm_priv->tb_count, lpm_priv->tb_count); |
| } |
| EXPORT_SYMBOL_GPL(ps3_disable_pm); |
| |
| /** |
| * ps3_lpm_copy_tb - Copy data from the trace buffer to a kernel buffer. |
| * @offset: Offset in bytes from the start of the trace buffer. |
| * @buf: Copy destination. |
| * @count: Maximum count of bytes to copy. |
| * @bytes_copied: Pointer to a variable that will receive the number of |
| * bytes copied to @buf. |
| * |
| * On error @buf will contain any successfully copied trace buffer data |
| * and bytes_copied will be set to the number of bytes successfully copied. |
| */ |
| |
| int ps3_lpm_copy_tb(unsigned long offset, void *buf, unsigned long count, |
| unsigned long *bytes_copied) |
| { |
| int result; |
| |
| *bytes_copied = 0; |
| |
| if (!lpm_priv->tb_cache) |
| return -EPERM; |
| |
| if (offset >= lpm_priv->tb_count) |
| return 0; |
| |
| count = min_t(u64, count, lpm_priv->tb_count - offset); |
| |
| while (*bytes_copied < count) { |
| const unsigned long request = count - *bytes_copied; |
| u64 tmp; |
| |
| result = lv1_copy_lpm_trace_buffer(lpm_priv->lpm_id, offset, |
| request, &tmp); |
| if (result) { |
| dev_dbg(sbd_core(), "%s:%u: 0x%lx bytes at 0x%lx\n", |
| __func__, __LINE__, request, offset); |
| |
| dev_err(sbd_core(), "%s:%u: lv1_copy_lpm_trace_buffer " |
| "failed: %s\n", __func__, __LINE__, |
| ps3_result(result)); |
| return result == LV1_WRONG_STATE ? -EBUSY : -EINVAL; |
| } |
| |
| memcpy(buf, lpm_priv->tb_cache, tmp); |
| buf += tmp; |
| *bytes_copied += tmp; |
| offset += tmp; |
| } |
| dev_dbg(sbd_core(), "%s:%u: copied %lxh bytes\n", __func__, __LINE__, |
| *bytes_copied); |
| |
| return 0; |
| } |
| EXPORT_SYMBOL_GPL(ps3_lpm_copy_tb); |
| |
| /** |
| * ps3_lpm_copy_tb_to_user - Copy data from the trace buffer to a user buffer. |
| * @offset: Offset in bytes from the start of the trace buffer. |
| * @buf: A __user copy destination. |
| * @count: Maximum count of bytes to copy. |
| * @bytes_copied: Pointer to a variable that will receive the number of |
| * bytes copied to @buf. |
| * |
| * On error @buf will contain any successfully copied trace buffer data |
| * and bytes_copied will be set to the number of bytes successfully copied. |
| */ |
| |
| int ps3_lpm_copy_tb_to_user(unsigned long offset, void __user *buf, |
| unsigned long count, unsigned long *bytes_copied) |
| { |
| int result; |
| |
| *bytes_copied = 0; |
| |
| if (!lpm_priv->tb_cache) |
| return -EPERM; |
| |
| if (offset >= lpm_priv->tb_count) |
| return 0; |
| |
| count = min_t(u64, count, lpm_priv->tb_count - offset); |
| |
| while (*bytes_copied < count) { |
| const unsigned long request = count - *bytes_copied; |
| u64 tmp; |
| |
| result = lv1_copy_lpm_trace_buffer(lpm_priv->lpm_id, offset, |
| request, &tmp); |
| if (result) { |
| dev_dbg(sbd_core(), "%s:%u: 0x%lx bytes at 0x%lx\n", |
| __func__, __LINE__, request, offset); |
| dev_err(sbd_core(), "%s:%u: lv1_copy_lpm_trace_buffer " |
| "failed: %s\n", __func__, __LINE__, |
| ps3_result(result)); |
| return result == LV1_WRONG_STATE ? -EBUSY : -EINVAL; |
| } |
| |
| result = copy_to_user(buf, lpm_priv->tb_cache, tmp); |
| |
| if (result) { |
| dev_dbg(sbd_core(), "%s:%u: 0x%llx bytes at 0x%p\n", |
| __func__, __LINE__, tmp, buf); |
| dev_err(sbd_core(), "%s:%u: copy_to_user failed: %d\n", |
| __func__, __LINE__, result); |
| return -EFAULT; |
| } |
| |
| buf += tmp; |
| *bytes_copied += tmp; |
| offset += tmp; |
| } |
| dev_dbg(sbd_core(), "%s:%u: copied %lxh bytes\n", __func__, __LINE__, |
| *bytes_copied); |
| |
| return 0; |
| } |
| EXPORT_SYMBOL_GPL(ps3_lpm_copy_tb_to_user); |
| |
| /** |
| * ps3_get_and_clear_pm_interrupts - |
| * |
| * Clearing interrupts for the entire performance monitoring unit. |
| * Reading pm_status clears the interrupt bits. |
| */ |
| |
| u32 ps3_get_and_clear_pm_interrupts(u32 cpu) |
| { |
| return ps3_read_pm(cpu, pm_status); |
| } |
| EXPORT_SYMBOL_GPL(ps3_get_and_clear_pm_interrupts); |
| |
| /** |
| * ps3_enable_pm_interrupts - |
| * |
| * Enabling interrupts for the entire performance monitoring unit. |
| * Enables the interrupt bits in the pm_status register. |
| */ |
| |
| void ps3_enable_pm_interrupts(u32 cpu, u32 thread, u32 mask) |
| { |
| if (mask) |
| ps3_write_pm(cpu, pm_status, mask); |
| } |
| EXPORT_SYMBOL_GPL(ps3_enable_pm_interrupts); |
| |
| /** |
| * ps3_enable_pm_interrupts - |
| * |
| * Disabling interrupts for the entire performance monitoring unit. |
| */ |
| |
| void ps3_disable_pm_interrupts(u32 cpu) |
| { |
| ps3_get_and_clear_pm_interrupts(cpu); |
| ps3_write_pm(cpu, pm_status, 0); |
| } |
| EXPORT_SYMBOL_GPL(ps3_disable_pm_interrupts); |
| |
| /** |
| * ps3_lpm_open - Open the logical performance monitor device. |
| * @tb_type: Specifies the type of trace buffer lv1 should use for this lpm |
| * instance, specified by one of enum ps3_lpm_tb_type. |
| * @tb_cache: Optional user supplied buffer to use as the trace buffer cache. |
| * If NULL, the driver will allocate and manage an internal buffer. |
| * Unused when when @tb_type is PS3_LPM_TB_TYPE_NONE. |
| * @tb_cache_size: The size in bytes of the user supplied @tb_cache buffer. |
| * Unused when @tb_cache is NULL or @tb_type is PS3_LPM_TB_TYPE_NONE. |
| */ |
| |
| int ps3_lpm_open(enum ps3_lpm_tb_type tb_type, void *tb_cache, |
| u64 tb_cache_size) |
| { |
| int result; |
| u64 tb_size; |
| |
| BUG_ON(!lpm_priv); |
| BUG_ON(tb_type != PS3_LPM_TB_TYPE_NONE |
| && tb_type != PS3_LPM_TB_TYPE_INTERNAL); |
| |
| if (tb_type == PS3_LPM_TB_TYPE_NONE && tb_cache) |
| dev_dbg(sbd_core(), "%s:%u: bad in vals\n", __func__, __LINE__); |
| |
| if (!atomic_add_unless(&lpm_priv->open, 1, 1)) { |
| dev_dbg(sbd_core(), "%s:%u: busy\n", __func__, __LINE__); |
| return -EBUSY; |
| } |
| |
| /* Note tb_cache needs 128 byte alignment. */ |
| |
| if (tb_type == PS3_LPM_TB_TYPE_NONE) { |
| lpm_priv->tb_cache_size = 0; |
| lpm_priv->tb_cache_internal = NULL; |
| lpm_priv->tb_cache = NULL; |
| } else if (tb_cache) { |
| if (tb_cache != (void *)ALIGN((unsigned long)tb_cache, 128) |
| || tb_cache_size != ALIGN(tb_cache_size, 128)) { |
| dev_err(sbd_core(), "%s:%u: unaligned tb_cache\n", |
| __func__, __LINE__); |
| result = -EINVAL; |
| goto fail_align; |
| } |
| lpm_priv->tb_cache_size = tb_cache_size; |
| lpm_priv->tb_cache_internal = NULL; |
| lpm_priv->tb_cache = tb_cache; |
| } else { |
| lpm_priv->tb_cache_size = PS3_LPM_DEFAULT_TB_CACHE_SIZE; |
| lpm_priv->tb_cache_internal = kzalloc( |
| lpm_priv->tb_cache_size + 127, GFP_KERNEL); |
| if (!lpm_priv->tb_cache_internal) { |
| result = -ENOMEM; |
| goto fail_malloc; |
| } |
| lpm_priv->tb_cache = (void *)ALIGN( |
| (unsigned long)lpm_priv->tb_cache_internal, 128); |
| } |
| |
| result = lv1_construct_lpm(lpm_priv->node_id, tb_type, 0, 0, |
| ps3_mm_phys_to_lpar(__pa(lpm_priv->tb_cache)), |
| lpm_priv->tb_cache_size, &lpm_priv->lpm_id, |
| &lpm_priv->outlet_id, &tb_size); |
| |
| if (result) { |
| dev_err(sbd_core(), "%s:%u: lv1_construct_lpm failed: %s\n", |
| __func__, __LINE__, ps3_result(result)); |
| result = -EINVAL; |
| goto fail_construct; |
| } |
| |
| lpm_priv->shadow.pm_control = PS3_LPM_SHADOW_REG_INIT; |
| lpm_priv->shadow.pm_start_stop = PS3_LPM_SHADOW_REG_INIT; |
| lpm_priv->shadow.group_control = PS3_LPM_SHADOW_REG_INIT; |
| lpm_priv->shadow.debug_bus_control = PS3_LPM_SHADOW_REG_INIT; |
| |
| dev_dbg(sbd_core(), "%s:%u: lpm_id 0x%llx, outlet_id 0x%llx, " |
| "tb_size 0x%llx\n", __func__, __LINE__, lpm_priv->lpm_id, |
| lpm_priv->outlet_id, tb_size); |
| |
| return 0; |
| |
| fail_construct: |
| kfree(lpm_priv->tb_cache_internal); |
| lpm_priv->tb_cache_internal = NULL; |
| fail_malloc: |
| fail_align: |
| atomic_dec(&lpm_priv->open); |
| return result; |
| } |
| EXPORT_SYMBOL_GPL(ps3_lpm_open); |
| |
| /** |
| * ps3_lpm_close - Close the lpm device. |
| * |
| */ |
| |
| int ps3_lpm_close(void) |
| { |
| dev_dbg(sbd_core(), "%s:%u\n", __func__, __LINE__); |
| |
| lv1_destruct_lpm(lpm_priv->lpm_id); |
| lpm_priv->lpm_id = 0; |
| |
| kfree(lpm_priv->tb_cache_internal); |
| lpm_priv->tb_cache_internal = NULL; |
| |
| atomic_dec(&lpm_priv->open); |
| return 0; |
| } |
| EXPORT_SYMBOL_GPL(ps3_lpm_close); |
| |
| static int ps3_lpm_probe(struct ps3_system_bus_device *dev) |
| { |
| dev_dbg(&dev->core, " -> %s:%u\n", __func__, __LINE__); |
| |
| if (lpm_priv) { |
| dev_info(&dev->core, "%s:%u: called twice\n", |
| __func__, __LINE__); |
| return -EBUSY; |
| } |
| |
| lpm_priv = kzalloc(sizeof(*lpm_priv), GFP_KERNEL); |
| |
| if (!lpm_priv) |
| return -ENOMEM; |
| |
| lpm_priv->sbd = dev; |
| lpm_priv->node_id = dev->lpm.node_id; |
| lpm_priv->pu_id = dev->lpm.pu_id; |
| lpm_priv->rights = dev->lpm.rights; |
| |
| dev_info(&dev->core, " <- %s:%u:\n", __func__, __LINE__); |
| |
| return 0; |
| } |
| |
| static int ps3_lpm_remove(struct ps3_system_bus_device *dev) |
| { |
| dev_dbg(&dev->core, " -> %s:%u:\n", __func__, __LINE__); |
| |
| ps3_lpm_close(); |
| |
| kfree(lpm_priv); |
| lpm_priv = NULL; |
| |
| dev_info(&dev->core, " <- %s:%u:\n", __func__, __LINE__); |
| return 0; |
| } |
| |
| static struct ps3_system_bus_driver ps3_lpm_driver = { |
| .match_id = PS3_MATCH_ID_LPM, |
| .core.name = "ps3-lpm", |
| .core.owner = THIS_MODULE, |
| .probe = ps3_lpm_probe, |
| .remove = ps3_lpm_remove, |
| .shutdown = ps3_lpm_remove, |
| }; |
| |
| static int __init ps3_lpm_init(void) |
| { |
| pr_debug("%s:%d:\n", __func__, __LINE__); |
| return ps3_system_bus_driver_register(&ps3_lpm_driver); |
| } |
| |
| static void __exit ps3_lpm_exit(void) |
| { |
| pr_debug("%s:%d:\n", __func__, __LINE__); |
| ps3_system_bus_driver_unregister(&ps3_lpm_driver); |
| } |
| |
| module_init(ps3_lpm_init); |
| module_exit(ps3_lpm_exit); |
| |
| MODULE_LICENSE("GPL v2"); |
| MODULE_DESCRIPTION("PS3 Logical Performance Monitor Driver"); |
| MODULE_AUTHOR("Sony Corporation"); |
| MODULE_ALIAS(PS3_MODULE_ALIAS_LPM); |