| // SPDX-License-Identifier: GPL-2.0-only |
| /* |
| * An I2C and SPI driver for the NXP PCF2127/29 RTC |
| * Copyright 2013 Til-Technologies |
| * |
| * Author: Renaud Cerrato <r.cerrato@til-technologies.fr> |
| * |
| * Watchdog and tamper functions |
| * Author: Bruno Thomsen <bruno.thomsen@gmail.com> |
| * |
| * based on the other drivers in this same directory. |
| * |
| * Datasheet: http://cache.nxp.com/documents/data_sheet/PCF2127.pdf |
| */ |
| |
| #include <linux/i2c.h> |
| #include <linux/spi/spi.h> |
| #include <linux/bcd.h> |
| #include <linux/rtc.h> |
| #include <linux/slab.h> |
| #include <linux/module.h> |
| #include <linux/of.h> |
| #include <linux/of_irq.h> |
| #include <linux/regmap.h> |
| #include <linux/watchdog.h> |
| |
| /* Control register 1 */ |
| #define PCF2127_REG_CTRL1 0x00 |
| #define PCF2127_BIT_CTRL1_TSF1 BIT(4) |
| /* Control register 2 */ |
| #define PCF2127_REG_CTRL2 0x01 |
| #define PCF2127_BIT_CTRL2_AIE BIT(1) |
| #define PCF2127_BIT_CTRL2_TSIE BIT(2) |
| #define PCF2127_BIT_CTRL2_AF BIT(4) |
| #define PCF2127_BIT_CTRL2_TSF2 BIT(5) |
| #define PCF2127_BIT_CTRL2_WDTF BIT(6) |
| /* Control register 3 */ |
| #define PCF2127_REG_CTRL3 0x02 |
| #define PCF2127_BIT_CTRL3_BLIE BIT(0) |
| #define PCF2127_BIT_CTRL3_BIE BIT(1) |
| #define PCF2127_BIT_CTRL3_BLF BIT(2) |
| #define PCF2127_BIT_CTRL3_BF BIT(3) |
| #define PCF2127_BIT_CTRL3_BTSE BIT(4) |
| /* Time and date registers */ |
| #define PCF2127_REG_SC 0x03 |
| #define PCF2127_BIT_SC_OSF BIT(7) |
| #define PCF2127_REG_MN 0x04 |
| #define PCF2127_REG_HR 0x05 |
| #define PCF2127_REG_DM 0x06 |
| #define PCF2127_REG_DW 0x07 |
| #define PCF2127_REG_MO 0x08 |
| #define PCF2127_REG_YR 0x09 |
| /* Alarm registers */ |
| #define PCF2127_REG_ALARM_SC 0x0A |
| #define PCF2127_REG_ALARM_MN 0x0B |
| #define PCF2127_REG_ALARM_HR 0x0C |
| #define PCF2127_REG_ALARM_DM 0x0D |
| #define PCF2127_REG_ALARM_DW 0x0E |
| #define PCF2127_BIT_ALARM_AE BIT(7) |
| /* Watchdog registers */ |
| #define PCF2127_REG_WD_CTL 0x10 |
| #define PCF2127_BIT_WD_CTL_TF0 BIT(0) |
| #define PCF2127_BIT_WD_CTL_TF1 BIT(1) |
| #define PCF2127_BIT_WD_CTL_CD0 BIT(6) |
| #define PCF2127_BIT_WD_CTL_CD1 BIT(7) |
| #define PCF2127_REG_WD_VAL 0x11 |
| /* Tamper timestamp registers */ |
| #define PCF2127_REG_TS_CTRL 0x12 |
| #define PCF2127_BIT_TS_CTRL_TSOFF BIT(6) |
| #define PCF2127_BIT_TS_CTRL_TSM BIT(7) |
| #define PCF2127_REG_TS_SC 0x13 |
| #define PCF2127_REG_TS_MN 0x14 |
| #define PCF2127_REG_TS_HR 0x15 |
| #define PCF2127_REG_TS_DM 0x16 |
| #define PCF2127_REG_TS_MO 0x17 |
| #define PCF2127_REG_TS_YR 0x18 |
| /* |
| * RAM registers |
| * PCF2127 has 512 bytes general-purpose static RAM (SRAM) that is |
| * battery backed and can survive a power outage. |
| * PCF2129 doesn't have this feature. |
| */ |
| #define PCF2127_REG_RAM_ADDR_MSB 0x1A |
| #define PCF2127_REG_RAM_WRT_CMD 0x1C |
| #define PCF2127_REG_RAM_RD_CMD 0x1D |
| |
| /* Watchdog timer value constants */ |
| #define PCF2127_WD_VAL_STOP 0 |
| #define PCF2127_WD_VAL_MIN 2 |
| #define PCF2127_WD_VAL_MAX 255 |
| #define PCF2127_WD_VAL_DEFAULT 60 |
| |
| struct pcf2127 { |
| struct rtc_device *rtc; |
| struct watchdog_device wdd; |
| struct regmap *regmap; |
| }; |
| |
| /* |
| * In the routines that deal directly with the pcf2127 hardware, we use |
| * rtc_time -- month 0-11, hour 0-23, yr = calendar year-epoch. |
| */ |
| static int pcf2127_rtc_read_time(struct device *dev, struct rtc_time *tm) |
| { |
| struct pcf2127 *pcf2127 = dev_get_drvdata(dev); |
| unsigned char buf[10]; |
| int ret; |
| |
| /* |
| * Avoid reading CTRL2 register as it causes WD_VAL register |
| * value to reset to 0 which means watchdog is stopped. |
| */ |
| ret = regmap_bulk_read(pcf2127->regmap, PCF2127_REG_CTRL3, |
| (buf + PCF2127_REG_CTRL3), |
| ARRAY_SIZE(buf) - PCF2127_REG_CTRL3); |
| if (ret) { |
| dev_err(dev, "%s: read error\n", __func__); |
| return ret; |
| } |
| |
| if (buf[PCF2127_REG_CTRL3] & PCF2127_BIT_CTRL3_BLF) |
| dev_info(dev, |
| "low voltage detected, check/replace RTC battery.\n"); |
| |
| /* Clock integrity is not guaranteed when OSF flag is set. */ |
| if (buf[PCF2127_REG_SC] & PCF2127_BIT_SC_OSF) { |
| /* |
| * no need clear the flag here, |
| * it will be cleared once the new date is saved |
| */ |
| dev_warn(dev, |
| "oscillator stop detected, date/time is not reliable\n"); |
| return -EINVAL; |
| } |
| |
| dev_dbg(dev, |
| "%s: raw data is cr3=%02x, sec=%02x, min=%02x, hr=%02x, " |
| "mday=%02x, wday=%02x, mon=%02x, year=%02x\n", |
| __func__, buf[PCF2127_REG_CTRL3], buf[PCF2127_REG_SC], |
| buf[PCF2127_REG_MN], buf[PCF2127_REG_HR], |
| buf[PCF2127_REG_DM], buf[PCF2127_REG_DW], |
| buf[PCF2127_REG_MO], buf[PCF2127_REG_YR]); |
| |
| tm->tm_sec = bcd2bin(buf[PCF2127_REG_SC] & 0x7F); |
| tm->tm_min = bcd2bin(buf[PCF2127_REG_MN] & 0x7F); |
| tm->tm_hour = bcd2bin(buf[PCF2127_REG_HR] & 0x3F); /* rtc hr 0-23 */ |
| tm->tm_mday = bcd2bin(buf[PCF2127_REG_DM] & 0x3F); |
| tm->tm_wday = buf[PCF2127_REG_DW] & 0x07; |
| tm->tm_mon = bcd2bin(buf[PCF2127_REG_MO] & 0x1F) - 1; /* rtc mn 1-12 */ |
| tm->tm_year = bcd2bin(buf[PCF2127_REG_YR]); |
| tm->tm_year += 100; |
| |
| dev_dbg(dev, "%s: tm is secs=%d, mins=%d, hours=%d, " |
| "mday=%d, mon=%d, year=%d, wday=%d\n", |
| __func__, |
| tm->tm_sec, tm->tm_min, tm->tm_hour, |
| tm->tm_mday, tm->tm_mon, tm->tm_year, tm->tm_wday); |
| |
| return 0; |
| } |
| |
| static int pcf2127_rtc_set_time(struct device *dev, struct rtc_time *tm) |
| { |
| struct pcf2127 *pcf2127 = dev_get_drvdata(dev); |
| unsigned char buf[7]; |
| int i = 0, err; |
| |
| dev_dbg(dev, "%s: secs=%d, mins=%d, hours=%d, " |
| "mday=%d, mon=%d, year=%d, wday=%d\n", |
| __func__, |
| tm->tm_sec, tm->tm_min, tm->tm_hour, |
| tm->tm_mday, tm->tm_mon, tm->tm_year, tm->tm_wday); |
| |
| /* hours, minutes and seconds */ |
| buf[i++] = bin2bcd(tm->tm_sec); /* this will also clear OSF flag */ |
| buf[i++] = bin2bcd(tm->tm_min); |
| buf[i++] = bin2bcd(tm->tm_hour); |
| buf[i++] = bin2bcd(tm->tm_mday); |
| buf[i++] = tm->tm_wday & 0x07; |
| |
| /* month, 1 - 12 */ |
| buf[i++] = bin2bcd(tm->tm_mon + 1); |
| |
| /* year */ |
| buf[i++] = bin2bcd(tm->tm_year - 100); |
| |
| /* write register's data */ |
| err = regmap_bulk_write(pcf2127->regmap, PCF2127_REG_SC, buf, i); |
| if (err) { |
| dev_err(dev, |
| "%s: err=%d", __func__, err); |
| return err; |
| } |
| |
| return 0; |
| } |
| |
| static int pcf2127_rtc_ioctl(struct device *dev, |
| unsigned int cmd, unsigned long arg) |
| { |
| struct pcf2127 *pcf2127 = dev_get_drvdata(dev); |
| int val, touser = 0; |
| int ret; |
| |
| switch (cmd) { |
| case RTC_VL_READ: |
| ret = regmap_read(pcf2127->regmap, PCF2127_REG_CTRL3, &val); |
| if (ret) |
| return ret; |
| |
| if (val & PCF2127_BIT_CTRL3_BLF) |
| touser |= RTC_VL_BACKUP_LOW; |
| |
| if (val & PCF2127_BIT_CTRL3_BF) |
| touser |= RTC_VL_BACKUP_SWITCH; |
| |
| return put_user(touser, (unsigned int __user *)arg); |
| |
| case RTC_VL_CLR: |
| return regmap_update_bits(pcf2127->regmap, PCF2127_REG_CTRL3, |
| PCF2127_BIT_CTRL3_BF, 0); |
| |
| default: |
| return -ENOIOCTLCMD; |
| } |
| } |
| |
| static const struct rtc_class_ops pcf2127_rtc_ops = { |
| .ioctl = pcf2127_rtc_ioctl, |
| .read_time = pcf2127_rtc_read_time, |
| .set_time = pcf2127_rtc_set_time, |
| }; |
| |
| static int pcf2127_nvmem_read(void *priv, unsigned int offset, |
| void *val, size_t bytes) |
| { |
| struct pcf2127 *pcf2127 = priv; |
| int ret; |
| unsigned char offsetbuf[] = { offset >> 8, offset }; |
| |
| ret = regmap_bulk_write(pcf2127->regmap, PCF2127_REG_RAM_ADDR_MSB, |
| offsetbuf, 2); |
| if (ret) |
| return ret; |
| |
| return regmap_bulk_read(pcf2127->regmap, PCF2127_REG_RAM_RD_CMD, |
| val, bytes); |
| } |
| |
| static int pcf2127_nvmem_write(void *priv, unsigned int offset, |
| void *val, size_t bytes) |
| { |
| struct pcf2127 *pcf2127 = priv; |
| int ret; |
| unsigned char offsetbuf[] = { offset >> 8, offset }; |
| |
| ret = regmap_bulk_write(pcf2127->regmap, PCF2127_REG_RAM_ADDR_MSB, |
| offsetbuf, 2); |
| if (ret) |
| return ret; |
| |
| return regmap_bulk_write(pcf2127->regmap, PCF2127_REG_RAM_WRT_CMD, |
| val, bytes); |
| } |
| |
| /* watchdog driver */ |
| |
| static int pcf2127_wdt_ping(struct watchdog_device *wdd) |
| { |
| struct pcf2127 *pcf2127 = watchdog_get_drvdata(wdd); |
| |
| return regmap_write(pcf2127->regmap, PCF2127_REG_WD_VAL, wdd->timeout); |
| } |
| |
| /* |
| * Restart watchdog timer if feature is active. |
| * |
| * Note: Reading CTRL2 register causes watchdog to stop which is unfortunate, |
| * since register also contain control/status flags for other features. |
| * Always call this function after reading CTRL2 register. |
| */ |
| static int pcf2127_wdt_active_ping(struct watchdog_device *wdd) |
| { |
| int ret = 0; |
| |
| if (watchdog_active(wdd)) { |
| ret = pcf2127_wdt_ping(wdd); |
| if (ret) |
| dev_err(wdd->parent, |
| "%s: watchdog restart failed, ret=%d\n", |
| __func__, ret); |
| } |
| |
| return ret; |
| } |
| |
| static int pcf2127_wdt_start(struct watchdog_device *wdd) |
| { |
| return pcf2127_wdt_ping(wdd); |
| } |
| |
| static int pcf2127_wdt_stop(struct watchdog_device *wdd) |
| { |
| struct pcf2127 *pcf2127 = watchdog_get_drvdata(wdd); |
| |
| return regmap_write(pcf2127->regmap, PCF2127_REG_WD_VAL, |
| PCF2127_WD_VAL_STOP); |
| } |
| |
| static int pcf2127_wdt_set_timeout(struct watchdog_device *wdd, |
| unsigned int new_timeout) |
| { |
| dev_dbg(wdd->parent, "new watchdog timeout: %is (old: %is)\n", |
| new_timeout, wdd->timeout); |
| |
| wdd->timeout = new_timeout; |
| |
| return pcf2127_wdt_active_ping(wdd); |
| } |
| |
| static const struct watchdog_info pcf2127_wdt_info = { |
| .identity = "NXP PCF2127/PCF2129 Watchdog", |
| .options = WDIOF_KEEPALIVEPING | WDIOF_SETTIMEOUT, |
| }; |
| |
| static const struct watchdog_ops pcf2127_watchdog_ops = { |
| .owner = THIS_MODULE, |
| .start = pcf2127_wdt_start, |
| .stop = pcf2127_wdt_stop, |
| .ping = pcf2127_wdt_ping, |
| .set_timeout = pcf2127_wdt_set_timeout, |
| }; |
| |
| static int pcf2127_watchdog_init(struct device *dev, struct pcf2127 *pcf2127) |
| { |
| u32 wdd_timeout; |
| int ret; |
| |
| if (!IS_ENABLED(CONFIG_WATCHDOG) || |
| !device_property_read_bool(dev, "reset-source")) |
| return 0; |
| |
| pcf2127->wdd.parent = dev; |
| pcf2127->wdd.info = &pcf2127_wdt_info; |
| pcf2127->wdd.ops = &pcf2127_watchdog_ops; |
| pcf2127->wdd.min_timeout = PCF2127_WD_VAL_MIN; |
| pcf2127->wdd.max_timeout = PCF2127_WD_VAL_MAX; |
| pcf2127->wdd.timeout = PCF2127_WD_VAL_DEFAULT; |
| pcf2127->wdd.min_hw_heartbeat_ms = 500; |
| pcf2127->wdd.status = WATCHDOG_NOWAYOUT_INIT_STATUS; |
| |
| watchdog_set_drvdata(&pcf2127->wdd, pcf2127); |
| |
| /* Test if watchdog timer is started by bootloader */ |
| ret = regmap_read(pcf2127->regmap, PCF2127_REG_WD_VAL, &wdd_timeout); |
| if (ret) |
| return ret; |
| |
| if (wdd_timeout) |
| set_bit(WDOG_HW_RUNNING, &pcf2127->wdd.status); |
| |
| return devm_watchdog_register_device(dev, &pcf2127->wdd); |
| } |
| |
| /* Alarm */ |
| static int pcf2127_rtc_read_alarm(struct device *dev, struct rtc_wkalrm *alrm) |
| { |
| struct pcf2127 *pcf2127 = dev_get_drvdata(dev); |
| unsigned int buf[5], ctrl2; |
| int ret; |
| |
| ret = regmap_read(pcf2127->regmap, PCF2127_REG_CTRL2, &ctrl2); |
| if (ret) |
| return ret; |
| |
| ret = pcf2127_wdt_active_ping(&pcf2127->wdd); |
| if (ret) |
| return ret; |
| |
| ret = regmap_bulk_read(pcf2127->regmap, PCF2127_REG_ALARM_SC, buf, |
| sizeof(buf)); |
| if (ret) |
| return ret; |
| |
| alrm->enabled = ctrl2 & PCF2127_BIT_CTRL2_AIE; |
| alrm->pending = ctrl2 & PCF2127_BIT_CTRL2_AF; |
| |
| alrm->time.tm_sec = bcd2bin(buf[0] & 0x7F); |
| alrm->time.tm_min = bcd2bin(buf[1] & 0x7F); |
| alrm->time.tm_hour = bcd2bin(buf[2] & 0x3F); |
| alrm->time.tm_mday = bcd2bin(buf[3] & 0x3F); |
| |
| return 0; |
| } |
| |
| static int pcf2127_rtc_alarm_irq_enable(struct device *dev, u32 enable) |
| { |
| struct pcf2127 *pcf2127 = dev_get_drvdata(dev); |
| int ret; |
| |
| ret = regmap_update_bits(pcf2127->regmap, PCF2127_REG_CTRL2, |
| PCF2127_BIT_CTRL2_AIE, |
| enable ? PCF2127_BIT_CTRL2_AIE : 0); |
| if (ret) |
| return ret; |
| |
| return pcf2127_wdt_active_ping(&pcf2127->wdd); |
| } |
| |
| static int pcf2127_rtc_set_alarm(struct device *dev, struct rtc_wkalrm *alrm) |
| { |
| struct pcf2127 *pcf2127 = dev_get_drvdata(dev); |
| uint8_t buf[5]; |
| int ret; |
| |
| ret = regmap_update_bits(pcf2127->regmap, PCF2127_REG_CTRL2, |
| PCF2127_BIT_CTRL2_AF, 0); |
| if (ret) |
| return ret; |
| |
| ret = pcf2127_wdt_active_ping(&pcf2127->wdd); |
| if (ret) |
| return ret; |
| |
| buf[0] = bin2bcd(alrm->time.tm_sec); |
| buf[1] = bin2bcd(alrm->time.tm_min); |
| buf[2] = bin2bcd(alrm->time.tm_hour); |
| buf[3] = bin2bcd(alrm->time.tm_mday); |
| buf[4] = PCF2127_BIT_ALARM_AE; /* Do not match on week day */ |
| |
| ret = regmap_bulk_write(pcf2127->regmap, PCF2127_REG_ALARM_SC, buf, |
| sizeof(buf)); |
| if (ret) |
| return ret; |
| |
| return pcf2127_rtc_alarm_irq_enable(dev, alrm->enabled); |
| } |
| |
| static irqreturn_t pcf2127_rtc_irq(int irq, void *dev) |
| { |
| struct pcf2127 *pcf2127 = dev_get_drvdata(dev); |
| unsigned int ctrl2 = 0; |
| int ret = 0; |
| |
| ret = regmap_read(pcf2127->regmap, PCF2127_REG_CTRL2, &ctrl2); |
| if (ret) |
| return IRQ_NONE; |
| |
| if (!(ctrl2 & PCF2127_BIT_CTRL2_AF)) |
| return IRQ_NONE; |
| |
| regmap_write(pcf2127->regmap, PCF2127_REG_CTRL2, |
| ctrl2 & ~(PCF2127_BIT_CTRL2_AF | PCF2127_BIT_CTRL2_WDTF)); |
| |
| rtc_update_irq(pcf2127->rtc, 1, RTC_IRQF | RTC_AF); |
| |
| pcf2127_wdt_active_ping(&pcf2127->wdd); |
| |
| return IRQ_HANDLED; |
| } |
| |
| static const struct rtc_class_ops pcf2127_rtc_alrm_ops = { |
| .ioctl = pcf2127_rtc_ioctl, |
| .read_time = pcf2127_rtc_read_time, |
| .set_time = pcf2127_rtc_set_time, |
| .read_alarm = pcf2127_rtc_read_alarm, |
| .set_alarm = pcf2127_rtc_set_alarm, |
| .alarm_irq_enable = pcf2127_rtc_alarm_irq_enable, |
| }; |
| |
| /* sysfs interface */ |
| |
| static ssize_t timestamp0_store(struct device *dev, |
| struct device_attribute *attr, |
| const char *buf, size_t count) |
| { |
| struct pcf2127 *pcf2127 = dev_get_drvdata(dev->parent); |
| int ret; |
| |
| ret = regmap_update_bits(pcf2127->regmap, PCF2127_REG_CTRL1, |
| PCF2127_BIT_CTRL1_TSF1, 0); |
| if (ret) { |
| dev_err(dev, "%s: update ctrl1 ret=%d\n", __func__, ret); |
| return ret; |
| } |
| |
| ret = regmap_update_bits(pcf2127->regmap, PCF2127_REG_CTRL2, |
| PCF2127_BIT_CTRL2_TSF2, 0); |
| if (ret) { |
| dev_err(dev, "%s: update ctrl2 ret=%d\n", __func__, ret); |
| return ret; |
| } |
| |
| ret = pcf2127_wdt_active_ping(&pcf2127->wdd); |
| if (ret) |
| return ret; |
| |
| return count; |
| }; |
| |
| static ssize_t timestamp0_show(struct device *dev, |
| struct device_attribute *attr, char *buf) |
| { |
| struct pcf2127 *pcf2127 = dev_get_drvdata(dev->parent); |
| struct rtc_time tm; |
| int ret; |
| unsigned char data[25]; |
| |
| ret = regmap_bulk_read(pcf2127->regmap, PCF2127_REG_CTRL1, data, |
| sizeof(data)); |
| if (ret) { |
| dev_err(dev, "%s: read error ret=%d\n", __func__, ret); |
| return ret; |
| } |
| |
| dev_dbg(dev, |
| "%s: raw data is cr1=%02x, cr2=%02x, cr3=%02x, ts_sc=%02x, " |
| "ts_mn=%02x, ts_hr=%02x, ts_dm=%02x, ts_mo=%02x, ts_yr=%02x\n", |
| __func__, data[PCF2127_REG_CTRL1], data[PCF2127_REG_CTRL2], |
| data[PCF2127_REG_CTRL3], data[PCF2127_REG_TS_SC], |
| data[PCF2127_REG_TS_MN], data[PCF2127_REG_TS_HR], |
| data[PCF2127_REG_TS_DM], data[PCF2127_REG_TS_MO], |
| data[PCF2127_REG_TS_YR]); |
| |
| ret = pcf2127_wdt_active_ping(&pcf2127->wdd); |
| if (ret) |
| return ret; |
| |
| if (!(data[PCF2127_REG_CTRL1] & PCF2127_BIT_CTRL1_TSF1) && |
| !(data[PCF2127_REG_CTRL2] & PCF2127_BIT_CTRL2_TSF2)) |
| return 0; |
| |
| tm.tm_sec = bcd2bin(data[PCF2127_REG_TS_SC] & 0x7F); |
| tm.tm_min = bcd2bin(data[PCF2127_REG_TS_MN] & 0x7F); |
| tm.tm_hour = bcd2bin(data[PCF2127_REG_TS_HR] & 0x3F); |
| tm.tm_mday = bcd2bin(data[PCF2127_REG_TS_DM] & 0x3F); |
| /* TS_MO register (month) value range: 1-12 */ |
| tm.tm_mon = bcd2bin(data[PCF2127_REG_TS_MO] & 0x1F) - 1; |
| tm.tm_year = bcd2bin(data[PCF2127_REG_TS_YR]); |
| if (tm.tm_year < 70) |
| tm.tm_year += 100; /* assume we are in 1970...2069 */ |
| |
| ret = rtc_valid_tm(&tm); |
| if (ret) |
| return ret; |
| |
| return sprintf(buf, "%llu\n", |
| (unsigned long long)rtc_tm_to_time64(&tm)); |
| }; |
| |
| static DEVICE_ATTR_RW(timestamp0); |
| |
| static struct attribute *pcf2127_attrs[] = { |
| &dev_attr_timestamp0.attr, |
| NULL |
| }; |
| |
| static const struct attribute_group pcf2127_attr_group = { |
| .attrs = pcf2127_attrs, |
| }; |
| |
| static int pcf2127_probe(struct device *dev, struct regmap *regmap, |
| int alarm_irq, const char *name, bool has_nvmem) |
| { |
| struct pcf2127 *pcf2127; |
| int ret = 0; |
| |
| dev_dbg(dev, "%s\n", __func__); |
| |
| pcf2127 = devm_kzalloc(dev, sizeof(*pcf2127), GFP_KERNEL); |
| if (!pcf2127) |
| return -ENOMEM; |
| |
| pcf2127->regmap = regmap; |
| |
| dev_set_drvdata(dev, pcf2127); |
| |
| pcf2127->rtc = devm_rtc_allocate_device(dev); |
| if (IS_ERR(pcf2127->rtc)) |
| return PTR_ERR(pcf2127->rtc); |
| |
| pcf2127->rtc->ops = &pcf2127_rtc_ops; |
| pcf2127->rtc->range_min = RTC_TIMESTAMP_BEGIN_2000; |
| pcf2127->rtc->range_max = RTC_TIMESTAMP_END_2099; |
| pcf2127->rtc->set_start_time = true; /* Sets actual start to 1970 */ |
| pcf2127->rtc->uie_unsupported = 1; |
| |
| if (alarm_irq > 0) { |
| ret = devm_request_threaded_irq(dev, alarm_irq, NULL, |
| pcf2127_rtc_irq, |
| IRQF_TRIGGER_LOW | IRQF_ONESHOT, |
| dev_name(dev), dev); |
| if (ret) { |
| dev_err(dev, "failed to request alarm irq\n"); |
| return ret; |
| } |
| } |
| |
| if (alarm_irq > 0 || device_property_read_bool(dev, "wakeup-source")) { |
| device_init_wakeup(dev, true); |
| pcf2127->rtc->ops = &pcf2127_rtc_alrm_ops; |
| } |
| |
| if (has_nvmem) { |
| struct nvmem_config nvmem_cfg = { |
| .priv = pcf2127, |
| .reg_read = pcf2127_nvmem_read, |
| .reg_write = pcf2127_nvmem_write, |
| .size = 512, |
| }; |
| |
| ret = rtc_nvmem_register(pcf2127->rtc, &nvmem_cfg); |
| } |
| |
| /* |
| * Watchdog timer enabled and reset pin /RST activated when timed out. |
| * Select 1Hz clock source for watchdog timer. |
| * Note: Countdown timer disabled and not available. |
| */ |
| ret = regmap_update_bits(pcf2127->regmap, PCF2127_REG_WD_CTL, |
| PCF2127_BIT_WD_CTL_CD1 | |
| PCF2127_BIT_WD_CTL_CD0 | |
| PCF2127_BIT_WD_CTL_TF1 | |
| PCF2127_BIT_WD_CTL_TF0, |
| PCF2127_BIT_WD_CTL_CD1 | |
| PCF2127_BIT_WD_CTL_CD0 | |
| PCF2127_BIT_WD_CTL_TF1); |
| if (ret) { |
| dev_err(dev, "%s: watchdog config (wd_ctl) failed\n", __func__); |
| return ret; |
| } |
| |
| pcf2127_watchdog_init(dev, pcf2127); |
| |
| /* |
| * Disable battery low/switch-over timestamp and interrupts. |
| * Clear battery interrupt flags which can block new trigger events. |
| * Note: This is the default chip behaviour but added to ensure |
| * correct tamper timestamp and interrupt function. |
| */ |
| ret = regmap_update_bits(pcf2127->regmap, PCF2127_REG_CTRL3, |
| PCF2127_BIT_CTRL3_BTSE | |
| PCF2127_BIT_CTRL3_BIE | |
| PCF2127_BIT_CTRL3_BLIE, 0); |
| if (ret) { |
| dev_err(dev, "%s: interrupt config (ctrl3) failed\n", |
| __func__); |
| return ret; |
| } |
| |
| /* |
| * Enable timestamp function and store timestamp of first trigger |
| * event until TSF1 and TFS2 interrupt flags are cleared. |
| */ |
| ret = regmap_update_bits(pcf2127->regmap, PCF2127_REG_TS_CTRL, |
| PCF2127_BIT_TS_CTRL_TSOFF | |
| PCF2127_BIT_TS_CTRL_TSM, |
| PCF2127_BIT_TS_CTRL_TSM); |
| if (ret) { |
| dev_err(dev, "%s: tamper detection config (ts_ctrl) failed\n", |
| __func__); |
| return ret; |
| } |
| |
| /* |
| * Enable interrupt generation when TSF1 or TSF2 timestamp flags |
| * are set. Interrupt signal is an open-drain output and can be |
| * left floating if unused. |
| */ |
| ret = regmap_update_bits(pcf2127->regmap, PCF2127_REG_CTRL2, |
| PCF2127_BIT_CTRL2_TSIE, |
| PCF2127_BIT_CTRL2_TSIE); |
| if (ret) { |
| dev_err(dev, "%s: tamper detection config (ctrl2) failed\n", |
| __func__); |
| return ret; |
| } |
| |
| ret = rtc_add_group(pcf2127->rtc, &pcf2127_attr_group); |
| if (ret) { |
| dev_err(dev, "%s: tamper sysfs registering failed\n", |
| __func__); |
| return ret; |
| } |
| |
| return rtc_register_device(pcf2127->rtc); |
| } |
| |
| #ifdef CONFIG_OF |
| static const struct of_device_id pcf2127_of_match[] = { |
| { .compatible = "nxp,pcf2127" }, |
| { .compatible = "nxp,pcf2129" }, |
| { .compatible = "nxp,pca2129" }, |
| {} |
| }; |
| MODULE_DEVICE_TABLE(of, pcf2127_of_match); |
| #endif |
| |
| #if IS_ENABLED(CONFIG_I2C) |
| |
| static int pcf2127_i2c_write(void *context, const void *data, size_t count) |
| { |
| struct device *dev = context; |
| struct i2c_client *client = to_i2c_client(dev); |
| int ret; |
| |
| ret = i2c_master_send(client, data, count); |
| if (ret != count) |
| return ret < 0 ? ret : -EIO; |
| |
| return 0; |
| } |
| |
| static int pcf2127_i2c_gather_write(void *context, |
| const void *reg, size_t reg_size, |
| const void *val, size_t val_size) |
| { |
| struct device *dev = context; |
| struct i2c_client *client = to_i2c_client(dev); |
| int ret; |
| void *buf; |
| |
| if (WARN_ON(reg_size != 1)) |
| return -EINVAL; |
| |
| buf = kmalloc(val_size + 1, GFP_KERNEL); |
| if (!buf) |
| return -ENOMEM; |
| |
| memcpy(buf, reg, 1); |
| memcpy(buf + 1, val, val_size); |
| |
| ret = i2c_master_send(client, buf, val_size + 1); |
| |
| kfree(buf); |
| |
| if (ret != val_size + 1) |
| return ret < 0 ? ret : -EIO; |
| |
| return 0; |
| } |
| |
| static int pcf2127_i2c_read(void *context, const void *reg, size_t reg_size, |
| void *val, size_t val_size) |
| { |
| struct device *dev = context; |
| struct i2c_client *client = to_i2c_client(dev); |
| int ret; |
| |
| if (WARN_ON(reg_size != 1)) |
| return -EINVAL; |
| |
| ret = i2c_master_send(client, reg, 1); |
| if (ret != 1) |
| return ret < 0 ? ret : -EIO; |
| |
| ret = i2c_master_recv(client, val, val_size); |
| if (ret != val_size) |
| return ret < 0 ? ret : -EIO; |
| |
| return 0; |
| } |
| |
| /* |
| * The reason we need this custom regmap_bus instead of using regmap_init_i2c() |
| * is that the STOP condition is required between set register address and |
| * read register data when reading from registers. |
| */ |
| static const struct regmap_bus pcf2127_i2c_regmap = { |
| .write = pcf2127_i2c_write, |
| .gather_write = pcf2127_i2c_gather_write, |
| .read = pcf2127_i2c_read, |
| }; |
| |
| static struct i2c_driver pcf2127_i2c_driver; |
| |
| static int pcf2127_i2c_probe(struct i2c_client *client, |
| const struct i2c_device_id *id) |
| { |
| struct regmap *regmap; |
| static const struct regmap_config config = { |
| .reg_bits = 8, |
| .val_bits = 8, |
| .max_register = 0x1d, |
| }; |
| |
| if (!i2c_check_functionality(client->adapter, I2C_FUNC_I2C)) |
| return -ENODEV; |
| |
| regmap = devm_regmap_init(&client->dev, &pcf2127_i2c_regmap, |
| &client->dev, &config); |
| if (IS_ERR(regmap)) { |
| dev_err(&client->dev, "%s: regmap allocation failed: %ld\n", |
| __func__, PTR_ERR(regmap)); |
| return PTR_ERR(regmap); |
| } |
| |
| return pcf2127_probe(&client->dev, regmap, client->irq, |
| pcf2127_i2c_driver.driver.name, id->driver_data); |
| } |
| |
| static const struct i2c_device_id pcf2127_i2c_id[] = { |
| { "pcf2127", 1 }, |
| { "pcf2129", 0 }, |
| { "pca2129", 0 }, |
| { } |
| }; |
| MODULE_DEVICE_TABLE(i2c, pcf2127_i2c_id); |
| |
| static struct i2c_driver pcf2127_i2c_driver = { |
| .driver = { |
| .name = "rtc-pcf2127-i2c", |
| .of_match_table = of_match_ptr(pcf2127_of_match), |
| }, |
| .probe = pcf2127_i2c_probe, |
| .id_table = pcf2127_i2c_id, |
| }; |
| |
| static int pcf2127_i2c_register_driver(void) |
| { |
| return i2c_add_driver(&pcf2127_i2c_driver); |
| } |
| |
| static void pcf2127_i2c_unregister_driver(void) |
| { |
| i2c_del_driver(&pcf2127_i2c_driver); |
| } |
| |
| #else |
| |
| static int pcf2127_i2c_register_driver(void) |
| { |
| return 0; |
| } |
| |
| static void pcf2127_i2c_unregister_driver(void) |
| { |
| } |
| |
| #endif |
| |
| #if IS_ENABLED(CONFIG_SPI_MASTER) |
| |
| static struct spi_driver pcf2127_spi_driver; |
| |
| static int pcf2127_spi_probe(struct spi_device *spi) |
| { |
| static const struct regmap_config config = { |
| .reg_bits = 8, |
| .val_bits = 8, |
| .read_flag_mask = 0xa0, |
| .write_flag_mask = 0x20, |
| .max_register = 0x1d, |
| }; |
| struct regmap *regmap; |
| |
| regmap = devm_regmap_init_spi(spi, &config); |
| if (IS_ERR(regmap)) { |
| dev_err(&spi->dev, "%s: regmap allocation failed: %ld\n", |
| __func__, PTR_ERR(regmap)); |
| return PTR_ERR(regmap); |
| } |
| |
| return pcf2127_probe(&spi->dev, regmap, spi->irq, |
| pcf2127_spi_driver.driver.name, |
| spi_get_device_id(spi)->driver_data); |
| } |
| |
| static const struct spi_device_id pcf2127_spi_id[] = { |
| { "pcf2127", 1 }, |
| { "pcf2129", 0 }, |
| { "pca2129", 0 }, |
| { } |
| }; |
| MODULE_DEVICE_TABLE(spi, pcf2127_spi_id); |
| |
| static struct spi_driver pcf2127_spi_driver = { |
| .driver = { |
| .name = "rtc-pcf2127-spi", |
| .of_match_table = of_match_ptr(pcf2127_of_match), |
| }, |
| .probe = pcf2127_spi_probe, |
| .id_table = pcf2127_spi_id, |
| }; |
| |
| static int pcf2127_spi_register_driver(void) |
| { |
| return spi_register_driver(&pcf2127_spi_driver); |
| } |
| |
| static void pcf2127_spi_unregister_driver(void) |
| { |
| spi_unregister_driver(&pcf2127_spi_driver); |
| } |
| |
| #else |
| |
| static int pcf2127_spi_register_driver(void) |
| { |
| return 0; |
| } |
| |
| static void pcf2127_spi_unregister_driver(void) |
| { |
| } |
| |
| #endif |
| |
| static int __init pcf2127_init(void) |
| { |
| int ret; |
| |
| ret = pcf2127_i2c_register_driver(); |
| if (ret) { |
| pr_err("Failed to register pcf2127 i2c driver: %d\n", ret); |
| return ret; |
| } |
| |
| ret = pcf2127_spi_register_driver(); |
| if (ret) { |
| pr_err("Failed to register pcf2127 spi driver: %d\n", ret); |
| pcf2127_i2c_unregister_driver(); |
| } |
| |
| return ret; |
| } |
| module_init(pcf2127_init) |
| |
| static void __exit pcf2127_exit(void) |
| { |
| pcf2127_spi_unregister_driver(); |
| pcf2127_i2c_unregister_driver(); |
| } |
| module_exit(pcf2127_exit) |
| |
| MODULE_AUTHOR("Renaud Cerrato <r.cerrato@til-technologies.fr>"); |
| MODULE_DESCRIPTION("NXP PCF2127/29 RTC driver"); |
| MODULE_LICENSE("GPL v2"); |