| // SPDX-License-Identifier: GPL-2.0+ |
| /* |
| * Mediatek MT7621 PCI PHY Driver |
| * Author: Sergio Paracuellos <sergio.paracuellos@gmail.com> |
| */ |
| |
| #include <dt-bindings/phy/phy.h> |
| #include <linux/bitops.h> |
| #include <linux/module.h> |
| #include <linux/of_address.h> |
| #include <linux/of_device.h> |
| #include <linux/phy/phy.h> |
| #include <linux/platform_device.h> |
| #include <linux/regmap.h> |
| #include <linux/sys_soc.h> |
| #include <mt7621.h> |
| #include <ralink_regs.h> |
| |
| #define RG_PE1_PIPE_REG 0x02c |
| #define RG_PE1_PIPE_RST BIT(12) |
| #define RG_PE1_PIPE_CMD_FRC BIT(4) |
| |
| #define RG_P0_TO_P1_WIDTH 0x100 |
| #define RG_PE1_H_LCDDS_REG 0x49c |
| #define RG_PE1_H_LCDDS_PCW GENMASK(30, 0) |
| #define RG_PE1_H_LCDDS_PCW_VAL(x) ((0x7fffffff & (x)) << 0) |
| |
| #define RG_PE1_FRC_H_XTAL_REG 0x400 |
| #define RG_PE1_FRC_H_XTAL_TYPE BIT(8) |
| #define RG_PE1_H_XTAL_TYPE GENMASK(10, 9) |
| #define RG_PE1_H_XTAL_TYPE_VAL(x) ((0x3 & (x)) << 9) |
| |
| #define RG_PE1_FRC_PHY_REG 0x000 |
| #define RG_PE1_FRC_PHY_EN BIT(4) |
| #define RG_PE1_PHY_EN BIT(5) |
| |
| #define RG_PE1_H_PLL_REG 0x490 |
| #define RG_PE1_H_PLL_BC GENMASK(23, 22) |
| #define RG_PE1_H_PLL_BC_VAL(x) ((0x3 & (x)) << 22) |
| #define RG_PE1_H_PLL_BP GENMASK(21, 18) |
| #define RG_PE1_H_PLL_BP_VAL(x) ((0xf & (x)) << 18) |
| #define RG_PE1_H_PLL_IR GENMASK(15, 12) |
| #define RG_PE1_H_PLL_IR_VAL(x) ((0xf & (x)) << 12) |
| #define RG_PE1_H_PLL_IC GENMASK(11, 8) |
| #define RG_PE1_H_PLL_IC_VAL(x) ((0xf & (x)) << 8) |
| #define RG_PE1_H_PLL_PREDIV GENMASK(7, 6) |
| #define RG_PE1_H_PLL_PREDIV_VAL(x) ((0x3 & (x)) << 6) |
| #define RG_PE1_PLL_DIVEN GENMASK(3, 1) |
| #define RG_PE1_PLL_DIVEN_VAL(x) ((0x7 & (x)) << 1) |
| |
| #define RG_PE1_H_PLL_FBKSEL_REG 0x4bc |
| #define RG_PE1_H_PLL_FBKSEL GENMASK(5, 4) |
| #define RG_PE1_H_PLL_FBKSEL_VAL(x) ((0x3 & (x)) << 4) |
| |
| #define RG_PE1_H_LCDDS_SSC_PRD_REG 0x4a4 |
| #define RG_PE1_H_LCDDS_SSC_PRD GENMASK(15, 0) |
| #define RG_PE1_H_LCDDS_SSC_PRD_VAL(x) ((0xffff & (x)) << 0) |
| |
| #define RG_PE1_H_LCDDS_SSC_DELTA_REG 0x4a8 |
| #define RG_PE1_H_LCDDS_SSC_DELTA GENMASK(11, 0) |
| #define RG_PE1_H_LCDDS_SSC_DELTA_VAL(x) ((0xfff & (x)) << 0) |
| #define RG_PE1_H_LCDDS_SSC_DELTA1 GENMASK(27, 16) |
| #define RG_PE1_H_LCDDS_SSC_DELTA1_VAL(x) ((0xff & (x)) << 16) |
| |
| #define RG_PE1_LCDDS_CLK_PH_INV_REG 0x4a0 |
| #define RG_PE1_LCDDS_CLK_PH_INV BIT(5) |
| |
| #define RG_PE1_H_PLL_BR_REG 0x4ac |
| #define RG_PE1_H_PLL_BR GENMASK(18, 16) |
| #define RG_PE1_H_PLL_BR_VAL(x) ((0x7 & (x)) << 16) |
| |
| #define RG_PE1_MSTCKDIV_REG 0x414 |
| #define RG_PE1_MSTCKDIV GENMASK(7, 6) |
| #define RG_PE1_MSTCKDIV_VAL(x) ((0x3 & (x)) << 6) |
| |
| #define RG_PE1_FRC_MSTCKDIV BIT(5) |
| |
| #define XTAL_MODE_SEL_SHIFT 6 |
| #define XTAL_MODE_SEL_MASK 0x7 |
| |
| #define MAX_PHYS 2 |
| |
| /** |
| * struct mt7621_pci_phy - Mt7621 Pcie PHY core |
| * @dev: pointer to device |
| * @regmap: kernel regmap pointer |
| * @phy: pointer to the kernel PHY device |
| * @port_base: base register |
| * @has_dual_port: if the phy has dual ports. |
| * @bypass_pipe_rst: mark if 'mt7621_bypass_pipe_rst' |
| * needs to be executed. Depends on chip revision. |
| */ |
| struct mt7621_pci_phy { |
| struct device *dev; |
| struct regmap *regmap; |
| struct phy *phy; |
| void __iomem *port_base; |
| bool has_dual_port; |
| bool bypass_pipe_rst; |
| }; |
| |
| static inline u32 phy_read(struct mt7621_pci_phy *phy, u32 reg) |
| { |
| u32 val; |
| |
| regmap_read(phy->regmap, reg, &val); |
| |
| return val; |
| } |
| |
| static inline void phy_write(struct mt7621_pci_phy *phy, u32 val, u32 reg) |
| { |
| regmap_write(phy->regmap, reg, val); |
| } |
| |
| static inline void mt7621_phy_rmw(struct mt7621_pci_phy *phy, |
| u32 reg, u32 clr, u32 set) |
| { |
| u32 val = phy_read(phy, reg); |
| |
| val &= ~clr; |
| val |= set; |
| phy_write(phy, val, reg); |
| } |
| |
| static void mt7621_bypass_pipe_rst(struct mt7621_pci_phy *phy) |
| { |
| mt7621_phy_rmw(phy, RG_PE1_PIPE_REG, 0, RG_PE1_PIPE_RST); |
| mt7621_phy_rmw(phy, RG_PE1_PIPE_REG, 0, RG_PE1_PIPE_CMD_FRC); |
| |
| if (phy->has_dual_port) { |
| mt7621_phy_rmw(phy, RG_PE1_PIPE_REG + RG_P0_TO_P1_WIDTH, |
| 0, RG_PE1_PIPE_RST); |
| mt7621_phy_rmw(phy, RG_PE1_PIPE_REG + RG_P0_TO_P1_WIDTH, |
| 0, RG_PE1_PIPE_CMD_FRC); |
| } |
| } |
| |
| static void mt7621_set_phy_for_ssc(struct mt7621_pci_phy *phy) |
| { |
| struct device *dev = phy->dev; |
| u32 xtal_mode; |
| |
| xtal_mode = (rt_sysc_r32(SYSC_REG_SYSTEM_CONFIG0) |
| >> XTAL_MODE_SEL_SHIFT) & XTAL_MODE_SEL_MASK; |
| |
| /* Set PCIe Port PHY to disable SSC */ |
| /* Debug Xtal Type */ |
| mt7621_phy_rmw(phy, RG_PE1_FRC_H_XTAL_REG, |
| RG_PE1_FRC_H_XTAL_TYPE | RG_PE1_H_XTAL_TYPE, |
| RG_PE1_FRC_H_XTAL_TYPE | RG_PE1_H_XTAL_TYPE_VAL(0x00)); |
| |
| /* disable port */ |
| mt7621_phy_rmw(phy, RG_PE1_FRC_PHY_REG, |
| RG_PE1_PHY_EN, RG_PE1_FRC_PHY_EN); |
| |
| if (phy->has_dual_port) { |
| mt7621_phy_rmw(phy, RG_PE1_FRC_PHY_REG + RG_P0_TO_P1_WIDTH, |
| RG_PE1_PHY_EN, RG_PE1_FRC_PHY_EN); |
| } |
| |
| if (xtal_mode <= 5 && xtal_mode >= 3) { /* 40MHz Xtal */ |
| /* Set Pre-divider ratio (for host mode) */ |
| mt7621_phy_rmw(phy, RG_PE1_H_PLL_REG, |
| RG_PE1_H_PLL_PREDIV, |
| RG_PE1_H_PLL_PREDIV_VAL(0x01)); |
| dev_info(dev, "Xtal is 40MHz\n"); |
| } else if (xtal_mode >= 6) { /* 25MHz Xal */ |
| mt7621_phy_rmw(phy, RG_PE1_H_PLL_REG, |
| RG_PE1_H_PLL_PREDIV, |
| RG_PE1_H_PLL_PREDIV_VAL(0x00)); |
| /* Select feedback clock */ |
| mt7621_phy_rmw(phy, RG_PE1_H_PLL_FBKSEL_REG, |
| RG_PE1_H_PLL_FBKSEL, |
| RG_PE1_H_PLL_FBKSEL_VAL(0x01)); |
| /* DDS NCPO PCW (for host mode) */ |
| mt7621_phy_rmw(phy, RG_PE1_H_LCDDS_SSC_PRD_REG, |
| RG_PE1_H_LCDDS_SSC_PRD, |
| RG_PE1_H_LCDDS_SSC_PRD_VAL(0x18000000)); |
| /* DDS SSC dither period control */ |
| mt7621_phy_rmw(phy, RG_PE1_H_LCDDS_SSC_PRD_REG, |
| RG_PE1_H_LCDDS_SSC_PRD, |
| RG_PE1_H_LCDDS_SSC_PRD_VAL(0x18d)); |
| /* DDS SSC dither amplitude control */ |
| mt7621_phy_rmw(phy, RG_PE1_H_LCDDS_SSC_DELTA_REG, |
| RG_PE1_H_LCDDS_SSC_DELTA | |
| RG_PE1_H_LCDDS_SSC_DELTA1, |
| RG_PE1_H_LCDDS_SSC_DELTA_VAL(0x4a) | |
| RG_PE1_H_LCDDS_SSC_DELTA1_VAL(0x4a)); |
| dev_info(dev, "Xtal is 25MHz\n"); |
| } else { /* 20MHz Xtal */ |
| mt7621_phy_rmw(phy, RG_PE1_H_PLL_REG, |
| RG_PE1_H_PLL_PREDIV, |
| RG_PE1_H_PLL_PREDIV_VAL(0x00)); |
| |
| dev_info(dev, "Xtal is 20MHz\n"); |
| } |
| |
| /* DDS clock inversion */ |
| mt7621_phy_rmw(phy, RG_PE1_LCDDS_CLK_PH_INV_REG, |
| RG_PE1_LCDDS_CLK_PH_INV, RG_PE1_LCDDS_CLK_PH_INV); |
| |
| /* Set PLL bits */ |
| mt7621_phy_rmw(phy, RG_PE1_H_PLL_REG, |
| RG_PE1_H_PLL_BC | RG_PE1_H_PLL_BP | RG_PE1_H_PLL_IR | |
| RG_PE1_H_PLL_IC | RG_PE1_PLL_DIVEN, |
| RG_PE1_H_PLL_BC_VAL(0x02) | RG_PE1_H_PLL_BP_VAL(0x06) | |
| RG_PE1_H_PLL_IR_VAL(0x02) | RG_PE1_H_PLL_IC_VAL(0x01) | |
| RG_PE1_PLL_DIVEN_VAL(0x02)); |
| |
| mt7621_phy_rmw(phy, RG_PE1_H_PLL_BR_REG, |
| RG_PE1_H_PLL_BR, RG_PE1_H_PLL_BR_VAL(0x00)); |
| |
| if (xtal_mode <= 5 && xtal_mode >= 3) { /* 40MHz Xtal */ |
| /* set force mode enable of da_pe1_mstckdiv */ |
| mt7621_phy_rmw(phy, RG_PE1_MSTCKDIV_REG, |
| RG_PE1_MSTCKDIV | RG_PE1_FRC_MSTCKDIV, |
| RG_PE1_MSTCKDIV_VAL(0x01) | RG_PE1_FRC_MSTCKDIV); |
| } |
| } |
| |
| static int mt7621_pci_phy_init(struct phy *phy) |
| { |
| struct mt7621_pci_phy *mphy = phy_get_drvdata(phy); |
| |
| if (mphy->bypass_pipe_rst) |
| mt7621_bypass_pipe_rst(mphy); |
| |
| mt7621_set_phy_for_ssc(mphy); |
| |
| return 0; |
| } |
| |
| static int mt7621_pci_phy_power_on(struct phy *phy) |
| { |
| struct mt7621_pci_phy *mphy = phy_get_drvdata(phy); |
| |
| /* Enable PHY and disable force mode */ |
| mt7621_phy_rmw(mphy, RG_PE1_FRC_PHY_REG, |
| RG_PE1_FRC_PHY_EN, RG_PE1_PHY_EN); |
| |
| if (mphy->has_dual_port) { |
| mt7621_phy_rmw(mphy, RG_PE1_FRC_PHY_REG + RG_P0_TO_P1_WIDTH, |
| RG_PE1_FRC_PHY_EN, RG_PE1_PHY_EN); |
| } |
| |
| return 0; |
| } |
| |
| static int mt7621_pci_phy_power_off(struct phy *phy) |
| { |
| struct mt7621_pci_phy *mphy = phy_get_drvdata(phy); |
| |
| /* Disable PHY */ |
| mt7621_phy_rmw(mphy, RG_PE1_FRC_PHY_REG, |
| RG_PE1_PHY_EN, RG_PE1_FRC_PHY_EN); |
| |
| if (mphy->has_dual_port) { |
| mt7621_phy_rmw(mphy, RG_PE1_FRC_PHY_REG + RG_P0_TO_P1_WIDTH, |
| RG_PE1_PHY_EN, RG_PE1_FRC_PHY_EN); |
| } |
| |
| return 0; |
| } |
| |
| static int mt7621_pci_phy_exit(struct phy *phy) |
| { |
| return 0; |
| } |
| |
| static const struct phy_ops mt7621_pci_phy_ops = { |
| .init = mt7621_pci_phy_init, |
| .exit = mt7621_pci_phy_exit, |
| .power_on = mt7621_pci_phy_power_on, |
| .power_off = mt7621_pci_phy_power_off, |
| .owner = THIS_MODULE, |
| }; |
| |
| static struct phy *mt7621_pcie_phy_of_xlate(struct device *dev, |
| struct of_phandle_args *args) |
| { |
| struct mt7621_pci_phy *mt7621_phy = dev_get_drvdata(dev); |
| |
| if (WARN_ON(args->args[0] >= MAX_PHYS)) |
| return ERR_PTR(-ENODEV); |
| |
| mt7621_phy->has_dual_port = args->args[0]; |
| |
| dev_info(dev, "PHY for 0x%08x (dual port = %d)\n", |
| (unsigned int)mt7621_phy->port_base, mt7621_phy->has_dual_port); |
| |
| return mt7621_phy->phy; |
| } |
| |
| static const struct soc_device_attribute mt7621_pci_quirks_match[] = { |
| { .soc_id = "mt7621", .revision = "E2" } |
| }; |
| |
| static const struct regmap_config mt7621_pci_phy_regmap_config = { |
| .reg_bits = 32, |
| .val_bits = 32, |
| .reg_stride = 4, |
| .max_register = 0x700, |
| }; |
| |
| static int mt7621_pci_phy_probe(struct platform_device *pdev) |
| { |
| struct device *dev = &pdev->dev; |
| const struct soc_device_attribute *attr; |
| struct phy_provider *provider; |
| struct mt7621_pci_phy *phy; |
| struct resource *res; |
| |
| phy = devm_kzalloc(dev, sizeof(*phy), GFP_KERNEL); |
| if (!phy) |
| return -ENOMEM; |
| |
| attr = soc_device_match(mt7621_pci_quirks_match); |
| if (attr) |
| phy->bypass_pipe_rst = true; |
| |
| phy->dev = dev; |
| platform_set_drvdata(pdev, phy); |
| |
| res = platform_get_resource(pdev, IORESOURCE_MEM, 0); |
| if (!res) { |
| dev_err(dev, "failed to get address resource\n"); |
| return -ENXIO; |
| } |
| |
| phy->port_base = devm_ioremap_resource(dev, res); |
| if (IS_ERR(phy->port_base)) { |
| dev_err(dev, "failed to remap phy regs\n"); |
| return PTR_ERR(phy->port_base); |
| } |
| |
| phy->regmap = devm_regmap_init_mmio(phy->dev, phy->port_base, |
| &mt7621_pci_phy_regmap_config); |
| if (IS_ERR(phy->regmap)) |
| return PTR_ERR(phy->regmap); |
| |
| phy->phy = devm_phy_create(dev, dev->of_node, &mt7621_pci_phy_ops); |
| if (IS_ERR(phy)) { |
| dev_err(dev, "failed to create phy\n"); |
| return PTR_ERR(phy); |
| } |
| |
| phy_set_drvdata(phy->phy, phy); |
| |
| provider = devm_of_phy_provider_register(dev, mt7621_pcie_phy_of_xlate); |
| |
| return PTR_ERR_OR_ZERO(provider); |
| } |
| |
| static const struct of_device_id mt7621_pci_phy_ids[] = { |
| { .compatible = "mediatek,mt7621-pci-phy" }, |
| {}, |
| }; |
| MODULE_DEVICE_TABLE(of, mt7621_pci_ids); |
| |
| static struct platform_driver mt7621_pci_phy_driver = { |
| .probe = mt7621_pci_phy_probe, |
| .driver = { |
| .name = "mt7621-pci-phy", |
| .of_match_table = of_match_ptr(mt7621_pci_phy_ids), |
| }, |
| }; |
| |
| builtin_platform_driver(mt7621_pci_phy_driver); |
| |
| MODULE_AUTHOR("Sergio Paracuellos <sergio.paracuellos@gmail.com>"); |
| MODULE_DESCRIPTION("MediaTek MT7621 PCIe PHY driver"); |
| MODULE_LICENSE("GPL v2"); |