| // SPDX-License-Identifier: GPL-2.0-or-later |
| /* |
| * Copyright (c) 2004 James Courtier-Dutton <James@superbug.demon.co.uk> |
| * Driver CA0106 chips. e.g. Sound Blaster Audigy LS and Live 24bit |
| * Version: 0.0.25 |
| * |
| * FEATURES currently supported: |
| * Front, Rear and Center/LFE. |
| * Surround40 and Surround51. |
| * Capture from MIC an LINE IN input. |
| * SPDIF digital playback of PCM stereo and AC3/DTS works. |
| * (One can use a standard mono mini-jack to one RCA plugs cable. |
| * or one can use a standard stereo mini-jack to two RCA plugs cable. |
| * Plug one of the RCA plugs into the Coax input of the external decoder/receiver.) |
| * ( In theory one could output 3 different AC3 streams at once, to 3 different SPDIF outputs. ) |
| * Notes on how to capture sound: |
| * The AC97 is used in the PLAYBACK direction. |
| * The output from the AC97 chip, instead of reaching the speakers, is fed into the Philips 1361T ADC. |
| * So, to record from the MIC, set the MIC Playback volume to max, |
| * unmute the MIC and turn up the MASTER Playback volume. |
| * So, to prevent feedback when capturing, minimise the "Capture feedback into Playback" volume. |
| * |
| * The only playback controls that currently do anything are: - |
| * Analog Front |
| * Analog Rear |
| * Analog Center/LFE |
| * SPDIF Front |
| * SPDIF Rear |
| * SPDIF Center/LFE |
| * |
| * For capture from Mic in or Line in. |
| * Digital/Analog ( switch must be in Analog mode for CAPTURE. ) |
| * |
| * CAPTURE feedback into PLAYBACK |
| * |
| * Changelog: |
| * Support interrupts per period. |
| * Removed noise from Center/LFE channel when in Analog mode. |
| * Rename and remove mixer controls. |
| * 0.0.6 |
| * Use separate card based DMA buffer for periods table list. |
| * 0.0.7 |
| * Change remove and rename ctrls into lists. |
| * 0.0.8 |
| * Try to fix capture sources. |
| * 0.0.9 |
| * Fix AC3 output. |
| * Enable S32_LE format support. |
| * 0.0.10 |
| * Enable playback 48000 and 96000 rates. (Rates other that these do not work, even with "plug:front".) |
| * 0.0.11 |
| * Add Model name recognition. |
| * 0.0.12 |
| * Correct interrupt timing. interrupt at end of period, instead of in the middle of a playback period. |
| * Remove redundent "voice" handling. |
| * 0.0.13 |
| * Single trigger call for multi channels. |
| * 0.0.14 |
| * Set limits based on what the sound card hardware can do. |
| * playback periods_min=2, periods_max=8 |
| * capture hw constraints require period_size = n * 64 bytes. |
| * playback hw constraints require period_size = n * 64 bytes. |
| * 0.0.15 |
| * Minor updates. |
| * 0.0.16 |
| * Implement 192000 sample rate. |
| * 0.0.17 |
| * Add support for SB0410 and SB0413. |
| * 0.0.18 |
| * Modified Copyright message. |
| * 0.0.19 |
| * Finally fix support for SB Live 24 bit. SB0410 and SB0413. |
| * The output codec needs resetting, otherwise all output is muted. |
| * 0.0.20 |
| * Merge "pci_disable_device(pci);" fixes. |
| * 0.0.21 |
| * Add 4 capture channels. (SPDIF only comes in on channel 0. ) |
| * Add SPDIF capture using optional digital I/O module for SB Live 24bit. (Analog capture does not yet work.) |
| * 0.0.22 |
| * Add support for MSI K8N Diamond Motherboard with onboard SB Live 24bit without AC97. From kiksen, bug #901 |
| * 0.0.23 |
| * Implement support for Line-in capture on SB Live 24bit. |
| * 0.0.24 |
| * Add support for mute control on SB Live 24bit (cards w/ SPI DAC) |
| * 0.0.25 |
| * Powerdown SPI DAC channels when not in use |
| * |
| * BUGS: |
| * Some stability problems when unloading the snd-ca0106 kernel module. |
| * -- |
| * |
| * TODO: |
| * 4 Capture channels, only one implemented so far. |
| * Other capture rates apart from 48khz not implemented. |
| * MIDI |
| * -- |
| * GENERAL INFO: |
| * Model: SB0310 |
| * P17 Chip: CA0106-DAT |
| * AC97 Codec: STAC 9721 |
| * ADC: Philips 1361T (Stereo 24bit) |
| * DAC: WM8746EDS (6-channel, 24bit, 192Khz) |
| * |
| * GENERAL INFO: |
| * Model: SB0410 |
| * P17 Chip: CA0106-DAT |
| * AC97 Codec: None |
| * ADC: WM8775EDS (4 Channel) |
| * DAC: CS4382 (114 dB, 24-Bit, 192 kHz, 8-Channel D/A Converter with DSD Support) |
| * SPDIF Out control switches between Mic in and SPDIF out. |
| * No sound out or mic input working yet. |
| * |
| * GENERAL INFO: |
| * Model: SB0413 |
| * P17 Chip: CA0106-DAT |
| * AC97 Codec: None. |
| * ADC: Unknown |
| * DAC: Unknown |
| * Trying to handle it like the SB0410. |
| * |
| * This code was initially based on code from ALSA's emu10k1x.c which is: |
| * Copyright (c) by Francisco Moraes <fmoraes@nc.rr.com> |
| */ |
| #include <linux/delay.h> |
| #include <linux/init.h> |
| #include <linux/interrupt.h> |
| #include <linux/pci.h> |
| #include <linux/slab.h> |
| #include <linux/module.h> |
| #include <linux/dma-mapping.h> |
| #include <sound/core.h> |
| #include <sound/initval.h> |
| #include <sound/pcm.h> |
| #include <sound/ac97_codec.h> |
| #include <sound/info.h> |
| |
| MODULE_AUTHOR("James Courtier-Dutton <James@superbug.demon.co.uk>"); |
| MODULE_DESCRIPTION("CA0106"); |
| MODULE_LICENSE("GPL"); |
| MODULE_SUPPORTED_DEVICE("{{Creative,SB CA0106 chip}}"); |
| |
| // module parameters (see "Module Parameters") |
| static int index[SNDRV_CARDS] = SNDRV_DEFAULT_IDX; |
| static char *id[SNDRV_CARDS] = SNDRV_DEFAULT_STR; |
| static bool enable[SNDRV_CARDS] = SNDRV_DEFAULT_ENABLE_PNP; |
| static uint subsystem[SNDRV_CARDS]; /* Force card subsystem model */ |
| |
| module_param_array(index, int, NULL, 0444); |
| MODULE_PARM_DESC(index, "Index value for the CA0106 soundcard."); |
| module_param_array(id, charp, NULL, 0444); |
| MODULE_PARM_DESC(id, "ID string for the CA0106 soundcard."); |
| module_param_array(enable, bool, NULL, 0444); |
| MODULE_PARM_DESC(enable, "Enable the CA0106 soundcard."); |
| module_param_array(subsystem, uint, NULL, 0444); |
| MODULE_PARM_DESC(subsystem, "Force card subsystem model."); |
| |
| #include "ca0106.h" |
| |
| static const struct snd_ca0106_details ca0106_chip_details[] = { |
| /* Sound Blaster X-Fi Extreme Audio. This does not have an AC97. 53SB079000000 */ |
| /* It is really just a normal SB Live 24bit. */ |
| /* Tested: |
| * See ALSA bug#3251 |
| */ |
| { .serial = 0x10131102, |
| .name = "X-Fi Extreme Audio [SBxxxx]", |
| .gpio_type = 1, |
| .i2c_adc = 1 } , |
| /* Sound Blaster X-Fi Extreme Audio. This does not have an AC97. 53SB079000000 */ |
| /* It is really just a normal SB Live 24bit. */ |
| /* |
| * CTRL:CA0111-WTLF |
| * ADC: WM8775SEDS |
| * DAC: CS4382-KQZ |
| */ |
| /* Tested: |
| * Playback on front, rear, center/lfe speakers |
| * Capture from Mic in. |
| * Not-Tested: |
| * Capture from Line in. |
| * Playback to digital out. |
| */ |
| { .serial = 0x10121102, |
| .name = "X-Fi Extreme Audio [SB0790]", |
| .gpio_type = 1, |
| .i2c_adc = 1 } , |
| /* New Dell Sound Blaster Live! 7.1 24bit. This does not have an AC97. */ |
| /* AudigyLS[SB0310] */ |
| { .serial = 0x10021102, |
| .name = "AudigyLS [SB0310]", |
| .ac97 = 1 } , |
| /* Unknown AudigyLS that also says SB0310 on it */ |
| { .serial = 0x10051102, |
| .name = "AudigyLS [SB0310b]", |
| .ac97 = 1 } , |
| /* New Sound Blaster Live! 7.1 24bit. This does not have an AC97. 53SB041000001 */ |
| { .serial = 0x10061102, |
| .name = "Live! 7.1 24bit [SB0410]", |
| .gpio_type = 1, |
| .i2c_adc = 1 } , |
| /* New Dell Sound Blaster Live! 7.1 24bit. This does not have an AC97. */ |
| { .serial = 0x10071102, |
| .name = "Live! 7.1 24bit [SB0413]", |
| .gpio_type = 1, |
| .i2c_adc = 1 } , |
| /* New Audigy SE. Has a different DAC. */ |
| /* SB0570: |
| * CTRL:CA0106-DAT |
| * ADC: WM8775EDS |
| * DAC: WM8768GEDS |
| */ |
| { .serial = 0x100a1102, |
| .name = "Audigy SE [SB0570]", |
| .gpio_type = 1, |
| .i2c_adc = 1, |
| .spi_dac = 0x4021 } , |
| /* New Audigy LS. Has a different DAC. */ |
| /* SB0570: |
| * CTRL:CA0106-DAT |
| * ADC: WM8775EDS |
| * DAC: WM8768GEDS |
| */ |
| { .serial = 0x10111102, |
| .name = "Audigy SE OEM [SB0570a]", |
| .gpio_type = 1, |
| .i2c_adc = 1, |
| .spi_dac = 0x4021 } , |
| /* Sound Blaster 5.1vx |
| * Tested: Playback on front, rear, center/lfe speakers |
| * Not-Tested: Capture |
| */ |
| { .serial = 0x10041102, |
| .name = "Sound Blaster 5.1vx [SB1070]", |
| .gpio_type = 1, |
| .i2c_adc = 0, |
| .spi_dac = 0x0124 |
| } , |
| /* MSI K8N Diamond Motherboard with onboard SB Live 24bit without AC97 */ |
| /* SB0438 |
| * CTRL:CA0106-DAT |
| * ADC: WM8775SEDS |
| * DAC: CS4382-KQZ |
| */ |
| { .serial = 0x10091462, |
| .name = "MSI K8N Diamond MB [SB0438]", |
| .gpio_type = 2, |
| .i2c_adc = 1 } , |
| /* MSI K8N Diamond PLUS MB */ |
| { .serial = 0x10091102, |
| .name = "MSI K8N Diamond MB", |
| .gpio_type = 2, |
| .i2c_adc = 1, |
| .spi_dac = 0x4021 } , |
| /* Giga-byte GA-G1975X mobo |
| * Novell bnc#395807 |
| */ |
| /* FIXME: the GPIO and I2C setting aren't tested well */ |
| { .serial = 0x1458a006, |
| .name = "Giga-byte GA-G1975X", |
| .gpio_type = 1, |
| .i2c_adc = 1 }, |
| /* Shuttle XPC SD31P which has an onboard Creative Labs |
| * Sound Blaster Live! 24-bit EAX |
| * high-definition 7.1 audio processor". |
| * Added using info from andrewvegan in alsa bug #1298 |
| */ |
| { .serial = 0x30381297, |
| .name = "Shuttle XPC SD31P [SD31P]", |
| .gpio_type = 1, |
| .i2c_adc = 1 } , |
| /* Shuttle XPC SD11G5 which has an onboard Creative Labs |
| * Sound Blaster Live! 24-bit EAX |
| * high-definition 7.1 audio processor". |
| * Fixes ALSA bug#1600 |
| */ |
| { .serial = 0x30411297, |
| .name = "Shuttle XPC SD11G5 [SD11G5]", |
| .gpio_type = 1, |
| .i2c_adc = 1 } , |
| { .serial = 0, |
| .name = "AudigyLS [Unknown]" } |
| }; |
| |
| /* hardware definition */ |
| static const struct snd_pcm_hardware snd_ca0106_playback_hw = { |
| .info = SNDRV_PCM_INFO_MMAP | |
| SNDRV_PCM_INFO_INTERLEAVED | |
| SNDRV_PCM_INFO_BLOCK_TRANSFER | |
| SNDRV_PCM_INFO_MMAP_VALID | |
| SNDRV_PCM_INFO_SYNC_START, |
| .formats = SNDRV_PCM_FMTBIT_S16_LE | SNDRV_PCM_FMTBIT_S32_LE, |
| .rates = (SNDRV_PCM_RATE_48000 | SNDRV_PCM_RATE_96000 | |
| SNDRV_PCM_RATE_192000), |
| .rate_min = 48000, |
| .rate_max = 192000, |
| .channels_min = 2, //1, |
| .channels_max = 2, //6, |
| .buffer_bytes_max = ((65536 - 64) * 8), |
| .period_bytes_min = 64, |
| .period_bytes_max = (65536 - 64), |
| .periods_min = 2, |
| .periods_max = 8, |
| .fifo_size = 0, |
| }; |
| |
| static const struct snd_pcm_hardware snd_ca0106_capture_hw = { |
| .info = (SNDRV_PCM_INFO_MMAP | |
| SNDRV_PCM_INFO_INTERLEAVED | |
| SNDRV_PCM_INFO_BLOCK_TRANSFER | |
| SNDRV_PCM_INFO_MMAP_VALID), |
| .formats = SNDRV_PCM_FMTBIT_S16_LE | SNDRV_PCM_FMTBIT_S32_LE, |
| #if 0 /* FIXME: looks like 44.1kHz capture causes noisy output on 48kHz */ |
| .rates = (SNDRV_PCM_RATE_44100 | SNDRV_PCM_RATE_48000 | |
| SNDRV_PCM_RATE_96000 | SNDRV_PCM_RATE_192000), |
| .rate_min = 44100, |
| #else |
| .rates = (SNDRV_PCM_RATE_48000 | |
| SNDRV_PCM_RATE_96000 | SNDRV_PCM_RATE_192000), |
| .rate_min = 48000, |
| #endif /* FIXME */ |
| .rate_max = 192000, |
| .channels_min = 2, |
| .channels_max = 2, |
| .buffer_bytes_max = 65536 - 128, |
| .period_bytes_min = 64, |
| .period_bytes_max = 32768 - 64, |
| .periods_min = 2, |
| .periods_max = 2, |
| .fifo_size = 0, |
| }; |
| |
| unsigned int snd_ca0106_ptr_read(struct snd_ca0106 * emu, |
| unsigned int reg, |
| unsigned int chn) |
| { |
| unsigned long flags; |
| unsigned int regptr, val; |
| |
| regptr = (reg << 16) | chn; |
| |
| spin_lock_irqsave(&emu->emu_lock, flags); |
| outl(regptr, emu->port + PTR); |
| val = inl(emu->port + DATA); |
| spin_unlock_irqrestore(&emu->emu_lock, flags); |
| return val; |
| } |
| |
| void snd_ca0106_ptr_write(struct snd_ca0106 *emu, |
| unsigned int reg, |
| unsigned int chn, |
| unsigned int data) |
| { |
| unsigned int regptr; |
| unsigned long flags; |
| |
| regptr = (reg << 16) | chn; |
| |
| spin_lock_irqsave(&emu->emu_lock, flags); |
| outl(regptr, emu->port + PTR); |
| outl(data, emu->port + DATA); |
| spin_unlock_irqrestore(&emu->emu_lock, flags); |
| } |
| |
| int snd_ca0106_spi_write(struct snd_ca0106 * emu, |
| unsigned int data) |
| { |
| unsigned int reset, set; |
| unsigned int reg, tmp; |
| int n, result; |
| reg = SPI; |
| if (data > 0xffff) /* Only 16bit values allowed */ |
| return 1; |
| tmp = snd_ca0106_ptr_read(emu, reg, 0); |
| reset = (tmp & ~0x3ffff) | 0x20000; /* Set xxx20000 */ |
| set = reset | 0x10000; /* Set xxx1xxxx */ |
| snd_ca0106_ptr_write(emu, reg, 0, reset | data); |
| tmp = snd_ca0106_ptr_read(emu, reg, 0); /* write post */ |
| snd_ca0106_ptr_write(emu, reg, 0, set | data); |
| result = 1; |
| /* Wait for status bit to return to 0 */ |
| for (n = 0; n < 100; n++) { |
| udelay(10); |
| tmp = snd_ca0106_ptr_read(emu, reg, 0); |
| if (!(tmp & 0x10000)) { |
| result = 0; |
| break; |
| } |
| } |
| if (result) /* Timed out */ |
| return 1; |
| snd_ca0106_ptr_write(emu, reg, 0, reset | data); |
| tmp = snd_ca0106_ptr_read(emu, reg, 0); /* Write post */ |
| return 0; |
| } |
| |
| /* The ADC does not support i2c read, so only write is implemented */ |
| int snd_ca0106_i2c_write(struct snd_ca0106 *emu, |
| u32 reg, |
| u32 value) |
| { |
| u32 tmp; |
| int timeout = 0; |
| int status; |
| int retry; |
| if ((reg > 0x7f) || (value > 0x1ff)) { |
| dev_err(emu->card->dev, "i2c_write: invalid values.\n"); |
| return -EINVAL; |
| } |
| |
| tmp = reg << 25 | value << 16; |
| /* |
| dev_dbg(emu->card->dev, "I2C-write:reg=0x%x, value=0x%x\n", reg, value); |
| */ |
| /* Not sure what this I2C channel controls. */ |
| /* snd_ca0106_ptr_write(emu, I2C_D0, 0, tmp); */ |
| |
| /* This controls the I2C connected to the WM8775 ADC Codec */ |
| snd_ca0106_ptr_write(emu, I2C_D1, 0, tmp); |
| |
| for (retry = 0; retry < 10; retry++) { |
| /* Send the data to i2c */ |
| //tmp = snd_ca0106_ptr_read(emu, I2C_A, 0); |
| //tmp = tmp & ~(I2C_A_ADC_READ|I2C_A_ADC_LAST|I2C_A_ADC_START|I2C_A_ADC_ADD_MASK); |
| tmp = 0; |
| tmp = tmp | (I2C_A_ADC_LAST|I2C_A_ADC_START|I2C_A_ADC_ADD); |
| snd_ca0106_ptr_write(emu, I2C_A, 0, tmp); |
| |
| /* Wait till the transaction ends */ |
| while (1) { |
| status = snd_ca0106_ptr_read(emu, I2C_A, 0); |
| /*dev_dbg(emu->card->dev, "I2C:status=0x%x\n", status);*/ |
| timeout++; |
| if ((status & I2C_A_ADC_START) == 0) |
| break; |
| |
| if (timeout > 1000) |
| break; |
| } |
| //Read back and see if the transaction is successful |
| if ((status & I2C_A_ADC_ABORT) == 0) |
| break; |
| } |
| |
| if (retry == 10) { |
| dev_err(emu->card->dev, "Writing to ADC failed!\n"); |
| return -EINVAL; |
| } |
| |
| return 0; |
| } |
| |
| |
| static void snd_ca0106_intr_enable(struct snd_ca0106 *emu, unsigned int intrenb) |
| { |
| unsigned long flags; |
| unsigned int intr_enable; |
| |
| spin_lock_irqsave(&emu->emu_lock, flags); |
| intr_enable = inl(emu->port + INTE) | intrenb; |
| outl(intr_enable, emu->port + INTE); |
| spin_unlock_irqrestore(&emu->emu_lock, flags); |
| } |
| |
| static void snd_ca0106_intr_disable(struct snd_ca0106 *emu, unsigned int intrenb) |
| { |
| unsigned long flags; |
| unsigned int intr_enable; |
| |
| spin_lock_irqsave(&emu->emu_lock, flags); |
| intr_enable = inl(emu->port + INTE) & ~intrenb; |
| outl(intr_enable, emu->port + INTE); |
| spin_unlock_irqrestore(&emu->emu_lock, flags); |
| } |
| |
| |
| static void snd_ca0106_pcm_free_substream(struct snd_pcm_runtime *runtime) |
| { |
| kfree(runtime->private_data); |
| } |
| |
| static const int spi_dacd_reg[] = { |
| SPI_DACD0_REG, |
| SPI_DACD1_REG, |
| SPI_DACD2_REG, |
| 0, |
| SPI_DACD4_REG, |
| }; |
| static const int spi_dacd_bit[] = { |
| SPI_DACD0_BIT, |
| SPI_DACD1_BIT, |
| SPI_DACD2_BIT, |
| 0, |
| SPI_DACD4_BIT, |
| }; |
| |
| static void restore_spdif_bits(struct snd_ca0106 *chip, int idx) |
| { |
| if (chip->spdif_str_bits[idx] != chip->spdif_bits[idx]) { |
| chip->spdif_str_bits[idx] = chip->spdif_bits[idx]; |
| snd_ca0106_ptr_write(chip, SPCS0 + idx, 0, |
| chip->spdif_str_bits[idx]); |
| } |
| } |
| |
| static int snd_ca0106_channel_dac(struct snd_ca0106 *chip, |
| const struct snd_ca0106_details *details, |
| int channel_id) |
| { |
| switch (channel_id) { |
| case PCM_FRONT_CHANNEL: |
| return (details->spi_dac & 0xf000) >> (4 * 3); |
| case PCM_REAR_CHANNEL: |
| return (details->spi_dac & 0x0f00) >> (4 * 2); |
| case PCM_CENTER_LFE_CHANNEL: |
| return (details->spi_dac & 0x00f0) >> (4 * 1); |
| case PCM_UNKNOWN_CHANNEL: |
| return (details->spi_dac & 0x000f) >> (4 * 0); |
| default: |
| dev_dbg(chip->card->dev, "ca0106: unknown channel_id %d\n", |
| channel_id); |
| } |
| return 0; |
| } |
| |
| static int snd_ca0106_pcm_power_dac(struct snd_ca0106 *chip, int channel_id, |
| int power) |
| { |
| if (chip->details->spi_dac) { |
| const int dac = snd_ca0106_channel_dac(chip, chip->details, |
| channel_id); |
| const int reg = spi_dacd_reg[dac]; |
| const int bit = spi_dacd_bit[dac]; |
| |
| if (power) |
| /* Power up */ |
| chip->spi_dac_reg[reg] &= ~bit; |
| else |
| /* Power down */ |
| chip->spi_dac_reg[reg] |= bit; |
| if (snd_ca0106_spi_write(chip, chip->spi_dac_reg[reg]) != 0) |
| return -ENXIO; |
| } |
| return 0; |
| } |
| |
| /* open_playback callback */ |
| static int snd_ca0106_pcm_open_playback_channel(struct snd_pcm_substream *substream, |
| int channel_id) |
| { |
| struct snd_ca0106 *chip = snd_pcm_substream_chip(substream); |
| struct snd_ca0106_channel *channel = &(chip->playback_channels[channel_id]); |
| struct snd_ca0106_pcm *epcm; |
| struct snd_pcm_runtime *runtime = substream->runtime; |
| int err; |
| |
| epcm = kzalloc(sizeof(*epcm), GFP_KERNEL); |
| |
| if (epcm == NULL) |
| return -ENOMEM; |
| epcm->emu = chip; |
| epcm->substream = substream; |
| epcm->channel_id=channel_id; |
| |
| runtime->private_data = epcm; |
| runtime->private_free = snd_ca0106_pcm_free_substream; |
| |
| runtime->hw = snd_ca0106_playback_hw; |
| |
| channel->emu = chip; |
| channel->number = channel_id; |
| |
| channel->use = 1; |
| /* |
| dev_dbg(chip->card->dev, "open:channel_id=%d, chip=%p, channel=%p\n", |
| channel_id, chip, channel); |
| */ |
| //channel->interrupt = snd_ca0106_pcm_channel_interrupt; |
| channel->epcm = epcm; |
| if ((err = snd_pcm_hw_constraint_integer(runtime, SNDRV_PCM_HW_PARAM_PERIODS)) < 0) |
| return err; |
| if ((err = snd_pcm_hw_constraint_step(runtime, 0, SNDRV_PCM_HW_PARAM_PERIOD_BYTES, 64)) < 0) |
| return err; |
| snd_pcm_set_sync(substream); |
| |
| /* Front channel dac should already be on */ |
| if (channel_id != PCM_FRONT_CHANNEL) { |
| err = snd_ca0106_pcm_power_dac(chip, channel_id, 1); |
| if (err < 0) |
| return err; |
| } |
| |
| restore_spdif_bits(chip, channel_id); |
| |
| return 0; |
| } |
| |
| /* close callback */ |
| static int snd_ca0106_pcm_close_playback(struct snd_pcm_substream *substream) |
| { |
| struct snd_ca0106 *chip = snd_pcm_substream_chip(substream); |
| struct snd_pcm_runtime *runtime = substream->runtime; |
| struct snd_ca0106_pcm *epcm = runtime->private_data; |
| chip->playback_channels[epcm->channel_id].use = 0; |
| |
| restore_spdif_bits(chip, epcm->channel_id); |
| |
| /* Front channel dac should stay on */ |
| if (epcm->channel_id != PCM_FRONT_CHANNEL) { |
| int err; |
| err = snd_ca0106_pcm_power_dac(chip, epcm->channel_id, 0); |
| if (err < 0) |
| return err; |
| } |
| |
| /* FIXME: maybe zero others */ |
| return 0; |
| } |
| |
| static int snd_ca0106_pcm_open_playback_front(struct snd_pcm_substream *substream) |
| { |
| return snd_ca0106_pcm_open_playback_channel(substream, PCM_FRONT_CHANNEL); |
| } |
| |
| static int snd_ca0106_pcm_open_playback_center_lfe(struct snd_pcm_substream *substream) |
| { |
| return snd_ca0106_pcm_open_playback_channel(substream, PCM_CENTER_LFE_CHANNEL); |
| } |
| |
| static int snd_ca0106_pcm_open_playback_unknown(struct snd_pcm_substream *substream) |
| { |
| return snd_ca0106_pcm_open_playback_channel(substream, PCM_UNKNOWN_CHANNEL); |
| } |
| |
| static int snd_ca0106_pcm_open_playback_rear(struct snd_pcm_substream *substream) |
| { |
| return snd_ca0106_pcm_open_playback_channel(substream, PCM_REAR_CHANNEL); |
| } |
| |
| /* open_capture callback */ |
| static int snd_ca0106_pcm_open_capture_channel(struct snd_pcm_substream *substream, |
| int channel_id) |
| { |
| struct snd_ca0106 *chip = snd_pcm_substream_chip(substream); |
| struct snd_ca0106_channel *channel = &(chip->capture_channels[channel_id]); |
| struct snd_ca0106_pcm *epcm; |
| struct snd_pcm_runtime *runtime = substream->runtime; |
| int err; |
| |
| epcm = kzalloc(sizeof(*epcm), GFP_KERNEL); |
| if (!epcm) |
| return -ENOMEM; |
| |
| epcm->emu = chip; |
| epcm->substream = substream; |
| epcm->channel_id=channel_id; |
| |
| runtime->private_data = epcm; |
| runtime->private_free = snd_ca0106_pcm_free_substream; |
| |
| runtime->hw = snd_ca0106_capture_hw; |
| |
| channel->emu = chip; |
| channel->number = channel_id; |
| |
| channel->use = 1; |
| /* |
| dev_dbg(chip->card->dev, "open:channel_id=%d, chip=%p, channel=%p\n", |
| channel_id, chip, channel); |
| */ |
| //channel->interrupt = snd_ca0106_pcm_channel_interrupt; |
| channel->epcm = epcm; |
| if ((err = snd_pcm_hw_constraint_integer(runtime, SNDRV_PCM_HW_PARAM_PERIODS)) < 0) |
| return err; |
| //snd_pcm_hw_constraint_list(runtime, 0, SNDRV_PCM_HW_PARAM_PERIOD_SIZE, &hw_constraints_capture_period_sizes); |
| if ((err = snd_pcm_hw_constraint_step(runtime, 0, SNDRV_PCM_HW_PARAM_PERIOD_BYTES, 64)) < 0) |
| return err; |
| return 0; |
| } |
| |
| /* close callback */ |
| static int snd_ca0106_pcm_close_capture(struct snd_pcm_substream *substream) |
| { |
| struct snd_ca0106 *chip = snd_pcm_substream_chip(substream); |
| struct snd_pcm_runtime *runtime = substream->runtime; |
| struct snd_ca0106_pcm *epcm = runtime->private_data; |
| chip->capture_channels[epcm->channel_id].use = 0; |
| /* FIXME: maybe zero others */ |
| return 0; |
| } |
| |
| static int snd_ca0106_pcm_open_0_capture(struct snd_pcm_substream *substream) |
| { |
| return snd_ca0106_pcm_open_capture_channel(substream, 0); |
| } |
| |
| static int snd_ca0106_pcm_open_1_capture(struct snd_pcm_substream *substream) |
| { |
| return snd_ca0106_pcm_open_capture_channel(substream, 1); |
| } |
| |
| static int snd_ca0106_pcm_open_2_capture(struct snd_pcm_substream *substream) |
| { |
| return snd_ca0106_pcm_open_capture_channel(substream, 2); |
| } |
| |
| static int snd_ca0106_pcm_open_3_capture(struct snd_pcm_substream *substream) |
| { |
| return snd_ca0106_pcm_open_capture_channel(substream, 3); |
| } |
| |
| /* prepare playback callback */ |
| static int snd_ca0106_pcm_prepare_playback(struct snd_pcm_substream *substream) |
| { |
| struct snd_ca0106 *emu = snd_pcm_substream_chip(substream); |
| struct snd_pcm_runtime *runtime = substream->runtime; |
| struct snd_ca0106_pcm *epcm = runtime->private_data; |
| int channel = epcm->channel_id; |
| u32 *table_base = (u32 *)(emu->buffer.area+(8*16*channel)); |
| u32 period_size_bytes = frames_to_bytes(runtime, runtime->period_size); |
| u32 hcfg_mask = HCFG_PLAYBACK_S32_LE; |
| u32 hcfg_set = 0x00000000; |
| u32 hcfg; |
| u32 reg40_mask = 0x30000 << (channel<<1); |
| u32 reg40_set = 0; |
| u32 reg40; |
| /* FIXME: Depending on mixer selection of SPDIF out or not, select the spdif rate or the DAC rate. */ |
| u32 reg71_mask = 0x03030000 ; /* Global. Set SPDIF rate. We only support 44100 to spdif, not to DAC. */ |
| u32 reg71_set = 0; |
| u32 reg71; |
| int i; |
| |
| #if 0 /* debug */ |
| dev_dbg(emu->card->dev, |
| "prepare:channel_number=%d, rate=%d, format=0x%x, " |
| "channels=%d, buffer_size=%ld, period_size=%ld, " |
| "periods=%u, frames_to_bytes=%d\n", |
| channel, runtime->rate, runtime->format, |
| runtime->channels, runtime->buffer_size, |
| runtime->period_size, runtime->periods, |
| frames_to_bytes(runtime, 1)); |
| dev_dbg(emu->card->dev, |
| "dma_addr=%x, dma_area=%p, table_base=%p\n", |
| runtime->dma_addr, runtime->dma_area, table_base); |
| dev_dbg(emu->card->dev, |
| "dma_addr=%x, dma_area=%p, dma_bytes(size)=%x\n", |
| emu->buffer.addr, emu->buffer.area, emu->buffer.bytes); |
| #endif /* debug */ |
| /* Rate can be set per channel. */ |
| /* reg40 control host to fifo */ |
| /* reg71 controls DAC rate. */ |
| switch (runtime->rate) { |
| case 44100: |
| reg40_set = 0x10000 << (channel<<1); |
| reg71_set = 0x01010000; |
| break; |
| case 48000: |
| reg40_set = 0; |
| reg71_set = 0; |
| break; |
| case 96000: |
| reg40_set = 0x20000 << (channel<<1); |
| reg71_set = 0x02020000; |
| break; |
| case 192000: |
| reg40_set = 0x30000 << (channel<<1); |
| reg71_set = 0x03030000; |
| break; |
| default: |
| reg40_set = 0; |
| reg71_set = 0; |
| break; |
| } |
| /* Format is a global setting */ |
| /* FIXME: Only let the first channel accessed set this. */ |
| switch (runtime->format) { |
| case SNDRV_PCM_FORMAT_S16_LE: |
| hcfg_set = 0; |
| break; |
| case SNDRV_PCM_FORMAT_S32_LE: |
| hcfg_set = HCFG_PLAYBACK_S32_LE; |
| break; |
| default: |
| hcfg_set = 0; |
| break; |
| } |
| hcfg = inl(emu->port + HCFG) ; |
| hcfg = (hcfg & ~hcfg_mask) | hcfg_set; |
| outl(hcfg, emu->port + HCFG); |
| reg40 = snd_ca0106_ptr_read(emu, 0x40, 0); |
| reg40 = (reg40 & ~reg40_mask) | reg40_set; |
| snd_ca0106_ptr_write(emu, 0x40, 0, reg40); |
| reg71 = snd_ca0106_ptr_read(emu, 0x71, 0); |
| reg71 = (reg71 & ~reg71_mask) | reg71_set; |
| snd_ca0106_ptr_write(emu, 0x71, 0, reg71); |
| |
| /* FIXME: Check emu->buffer.size before actually writing to it. */ |
| for(i=0; i < runtime->periods; i++) { |
| table_base[i*2] = runtime->dma_addr + (i * period_size_bytes); |
| table_base[i*2+1] = period_size_bytes << 16; |
| } |
| |
| snd_ca0106_ptr_write(emu, PLAYBACK_LIST_ADDR, channel, emu->buffer.addr+(8*16*channel)); |
| snd_ca0106_ptr_write(emu, PLAYBACK_LIST_SIZE, channel, (runtime->periods - 1) << 19); |
| snd_ca0106_ptr_write(emu, PLAYBACK_LIST_PTR, channel, 0); |
| snd_ca0106_ptr_write(emu, PLAYBACK_DMA_ADDR, channel, runtime->dma_addr); |
| snd_ca0106_ptr_write(emu, PLAYBACK_PERIOD_SIZE, channel, frames_to_bytes(runtime, runtime->period_size)<<16); // buffer size in bytes |
| /* FIXME test what 0 bytes does. */ |
| snd_ca0106_ptr_write(emu, PLAYBACK_PERIOD_SIZE, channel, 0); // buffer size in bytes |
| snd_ca0106_ptr_write(emu, PLAYBACK_POINTER, channel, 0); |
| snd_ca0106_ptr_write(emu, 0x07, channel, 0x0); |
| snd_ca0106_ptr_write(emu, 0x08, channel, 0); |
| snd_ca0106_ptr_write(emu, PLAYBACK_MUTE, 0x0, 0x0); /* Unmute output */ |
| #if 0 |
| snd_ca0106_ptr_write(emu, SPCS0, 0, |
| SPCS_CLKACCY_1000PPM | SPCS_SAMPLERATE_48 | |
| SPCS_CHANNELNUM_LEFT | SPCS_SOURCENUM_UNSPEC | |
| SPCS_GENERATIONSTATUS | 0x00001200 | |
| 0x00000000 | SPCS_EMPHASIS_NONE | SPCS_COPYRIGHT ); |
| #endif |
| |
| return 0; |
| } |
| |
| /* prepare capture callback */ |
| static int snd_ca0106_pcm_prepare_capture(struct snd_pcm_substream *substream) |
| { |
| struct snd_ca0106 *emu = snd_pcm_substream_chip(substream); |
| struct snd_pcm_runtime *runtime = substream->runtime; |
| struct snd_ca0106_pcm *epcm = runtime->private_data; |
| int channel = epcm->channel_id; |
| u32 hcfg_mask = HCFG_CAPTURE_S32_LE; |
| u32 hcfg_set = 0x00000000; |
| u32 hcfg; |
| u32 over_sampling=0x2; |
| u32 reg71_mask = 0x0000c000 ; /* Global. Set ADC rate. */ |
| u32 reg71_set = 0; |
| u32 reg71; |
| |
| #if 0 /* debug */ |
| dev_dbg(emu->card->dev, |
| "prepare:channel_number=%d, rate=%d, format=0x%x, " |
| "channels=%d, buffer_size=%ld, period_size=%ld, " |
| "periods=%u, frames_to_bytes=%d\n", |
| channel, runtime->rate, runtime->format, |
| runtime->channels, runtime->buffer_size, |
| runtime->period_size, runtime->periods, |
| frames_to_bytes(runtime, 1)); |
| dev_dbg(emu->card->dev, |
| "dma_addr=%x, dma_area=%p, table_base=%p\n", |
| runtime->dma_addr, runtime->dma_area, table_base); |
| dev_dbg(emu->card->dev, |
| "dma_addr=%x, dma_area=%p, dma_bytes(size)=%x\n", |
| emu->buffer.addr, emu->buffer.area, emu->buffer.bytes); |
| #endif /* debug */ |
| /* reg71 controls ADC rate. */ |
| switch (runtime->rate) { |
| case 44100: |
| reg71_set = 0x00004000; |
| break; |
| case 48000: |
| reg71_set = 0; |
| break; |
| case 96000: |
| reg71_set = 0x00008000; |
| over_sampling=0xa; |
| break; |
| case 192000: |
| reg71_set = 0x0000c000; |
| over_sampling=0xa; |
| break; |
| default: |
| reg71_set = 0; |
| break; |
| } |
| /* Format is a global setting */ |
| /* FIXME: Only let the first channel accessed set this. */ |
| switch (runtime->format) { |
| case SNDRV_PCM_FORMAT_S16_LE: |
| hcfg_set = 0; |
| break; |
| case SNDRV_PCM_FORMAT_S32_LE: |
| hcfg_set = HCFG_CAPTURE_S32_LE; |
| break; |
| default: |
| hcfg_set = 0; |
| break; |
| } |
| hcfg = inl(emu->port + HCFG) ; |
| hcfg = (hcfg & ~hcfg_mask) | hcfg_set; |
| outl(hcfg, emu->port + HCFG); |
| reg71 = snd_ca0106_ptr_read(emu, 0x71, 0); |
| reg71 = (reg71 & ~reg71_mask) | reg71_set; |
| snd_ca0106_ptr_write(emu, 0x71, 0, reg71); |
| if (emu->details->i2c_adc == 1) { /* The SB0410 and SB0413 use I2C to control ADC. */ |
| snd_ca0106_i2c_write(emu, ADC_MASTER, over_sampling); /* Adjust the over sampler to better suit the capture rate. */ |
| } |
| |
| |
| /* |
| dev_dbg(emu->card->dev, |
| "prepare:channel_number=%d, rate=%d, format=0x%x, channels=%d, " |
| "buffer_size=%ld, period_size=%ld, frames_to_bytes=%d\n", |
| channel, runtime->rate, runtime->format, runtime->channels, |
| runtime->buffer_size, runtime->period_size, |
| frames_to_bytes(runtime, 1)); |
| */ |
| snd_ca0106_ptr_write(emu, 0x13, channel, 0); |
| snd_ca0106_ptr_write(emu, CAPTURE_DMA_ADDR, channel, runtime->dma_addr); |
| snd_ca0106_ptr_write(emu, CAPTURE_BUFFER_SIZE, channel, frames_to_bytes(runtime, runtime->buffer_size)<<16); // buffer size in bytes |
| snd_ca0106_ptr_write(emu, CAPTURE_POINTER, channel, 0); |
| |
| return 0; |
| } |
| |
| /* trigger_playback callback */ |
| static int snd_ca0106_pcm_trigger_playback(struct snd_pcm_substream *substream, |
| int cmd) |
| { |
| struct snd_ca0106 *emu = snd_pcm_substream_chip(substream); |
| struct snd_pcm_runtime *runtime; |
| struct snd_ca0106_pcm *epcm; |
| int channel; |
| int result = 0; |
| struct snd_pcm_substream *s; |
| u32 basic = 0; |
| u32 extended = 0; |
| u32 bits; |
| int running = 0; |
| |
| switch (cmd) { |
| case SNDRV_PCM_TRIGGER_START: |
| case SNDRV_PCM_TRIGGER_RESUME: |
| running = 1; |
| break; |
| case SNDRV_PCM_TRIGGER_STOP: |
| case SNDRV_PCM_TRIGGER_SUSPEND: |
| default: |
| running = 0; |
| break; |
| } |
| snd_pcm_group_for_each_entry(s, substream) { |
| if (snd_pcm_substream_chip(s) != emu || |
| s->stream != SNDRV_PCM_STREAM_PLAYBACK) |
| continue; |
| runtime = s->runtime; |
| epcm = runtime->private_data; |
| channel = epcm->channel_id; |
| /* dev_dbg(emu->card->dev, "channel=%d\n", channel); */ |
| epcm->running = running; |
| basic |= (0x1 << channel); |
| extended |= (0x10 << channel); |
| snd_pcm_trigger_done(s, substream); |
| } |
| /* dev_dbg(emu->card->dev, "basic=0x%x, extended=0x%x\n",basic, extended); */ |
| |
| switch (cmd) { |
| case SNDRV_PCM_TRIGGER_START: |
| case SNDRV_PCM_TRIGGER_RESUME: |
| bits = snd_ca0106_ptr_read(emu, EXTENDED_INT_MASK, 0); |
| bits |= extended; |
| snd_ca0106_ptr_write(emu, EXTENDED_INT_MASK, 0, bits); |
| bits = snd_ca0106_ptr_read(emu, BASIC_INTERRUPT, 0); |
| bits |= basic; |
| snd_ca0106_ptr_write(emu, BASIC_INTERRUPT, 0, bits); |
| break; |
| case SNDRV_PCM_TRIGGER_STOP: |
| case SNDRV_PCM_TRIGGER_SUSPEND: |
| bits = snd_ca0106_ptr_read(emu, BASIC_INTERRUPT, 0); |
| bits &= ~basic; |
| snd_ca0106_ptr_write(emu, BASIC_INTERRUPT, 0, bits); |
| bits = snd_ca0106_ptr_read(emu, EXTENDED_INT_MASK, 0); |
| bits &= ~extended; |
| snd_ca0106_ptr_write(emu, EXTENDED_INT_MASK, 0, bits); |
| break; |
| default: |
| result = -EINVAL; |
| break; |
| } |
| return result; |
| } |
| |
| /* trigger_capture callback */ |
| static int snd_ca0106_pcm_trigger_capture(struct snd_pcm_substream *substream, |
| int cmd) |
| { |
| struct snd_ca0106 *emu = snd_pcm_substream_chip(substream); |
| struct snd_pcm_runtime *runtime = substream->runtime; |
| struct snd_ca0106_pcm *epcm = runtime->private_data; |
| int channel = epcm->channel_id; |
| int result = 0; |
| |
| switch (cmd) { |
| case SNDRV_PCM_TRIGGER_START: |
| snd_ca0106_ptr_write(emu, EXTENDED_INT_MASK, 0, snd_ca0106_ptr_read(emu, EXTENDED_INT_MASK, 0) | (0x110000<<channel)); |
| snd_ca0106_ptr_write(emu, BASIC_INTERRUPT, 0, snd_ca0106_ptr_read(emu, BASIC_INTERRUPT, 0)|(0x100<<channel)); |
| epcm->running = 1; |
| break; |
| case SNDRV_PCM_TRIGGER_STOP: |
| snd_ca0106_ptr_write(emu, BASIC_INTERRUPT, 0, snd_ca0106_ptr_read(emu, BASIC_INTERRUPT, 0) & ~(0x100<<channel)); |
| snd_ca0106_ptr_write(emu, EXTENDED_INT_MASK, 0, snd_ca0106_ptr_read(emu, EXTENDED_INT_MASK, 0) & ~(0x110000<<channel)); |
| epcm->running = 0; |
| break; |
| default: |
| result = -EINVAL; |
| break; |
| } |
| return result; |
| } |
| |
| /* pointer_playback callback */ |
| static snd_pcm_uframes_t |
| snd_ca0106_pcm_pointer_playback(struct snd_pcm_substream *substream) |
| { |
| struct snd_ca0106 *emu = snd_pcm_substream_chip(substream); |
| struct snd_pcm_runtime *runtime = substream->runtime; |
| struct snd_ca0106_pcm *epcm = runtime->private_data; |
| unsigned int ptr, prev_ptr; |
| int channel = epcm->channel_id; |
| int timeout = 10; |
| |
| if (!epcm->running) |
| return 0; |
| |
| prev_ptr = -1; |
| do { |
| ptr = snd_ca0106_ptr_read(emu, PLAYBACK_LIST_PTR, channel); |
| ptr = (ptr >> 3) * runtime->period_size; |
| ptr += bytes_to_frames(runtime, |
| snd_ca0106_ptr_read(emu, PLAYBACK_POINTER, channel)); |
| if (ptr >= runtime->buffer_size) |
| ptr -= runtime->buffer_size; |
| if (prev_ptr == ptr) |
| return ptr; |
| prev_ptr = ptr; |
| } while (--timeout); |
| dev_warn(emu->card->dev, "ca0106: unstable DMA pointer!\n"); |
| return 0; |
| } |
| |
| /* pointer_capture callback */ |
| static snd_pcm_uframes_t |
| snd_ca0106_pcm_pointer_capture(struct snd_pcm_substream *substream) |
| { |
| struct snd_ca0106 *emu = snd_pcm_substream_chip(substream); |
| struct snd_pcm_runtime *runtime = substream->runtime; |
| struct snd_ca0106_pcm *epcm = runtime->private_data; |
| snd_pcm_uframes_t ptr, ptr1, ptr2 = 0; |
| int channel = epcm->channel_id; |
| |
| if (!epcm->running) |
| return 0; |
| |
| ptr1 = snd_ca0106_ptr_read(emu, CAPTURE_POINTER, channel); |
| ptr2 = bytes_to_frames(runtime, ptr1); |
| ptr=ptr2; |
| if (ptr >= runtime->buffer_size) |
| ptr -= runtime->buffer_size; |
| /* |
| dev_dbg(emu->card->dev, "ptr1 = 0x%lx, ptr2=0x%lx, ptr=0x%lx, " |
| "buffer_size = 0x%x, period_size = 0x%x, bits=%d, rate=%d\n", |
| ptr1, ptr2, ptr, (int)runtime->buffer_size, |
| (int)runtime->period_size, (int)runtime->frame_bits, |
| (int)runtime->rate); |
| */ |
| return ptr; |
| } |
| |
| /* operators */ |
| static const struct snd_pcm_ops snd_ca0106_playback_front_ops = { |
| .open = snd_ca0106_pcm_open_playback_front, |
| .close = snd_ca0106_pcm_close_playback, |
| .prepare = snd_ca0106_pcm_prepare_playback, |
| .trigger = snd_ca0106_pcm_trigger_playback, |
| .pointer = snd_ca0106_pcm_pointer_playback, |
| }; |
| |
| static const struct snd_pcm_ops snd_ca0106_capture_0_ops = { |
| .open = snd_ca0106_pcm_open_0_capture, |
| .close = snd_ca0106_pcm_close_capture, |
| .prepare = snd_ca0106_pcm_prepare_capture, |
| .trigger = snd_ca0106_pcm_trigger_capture, |
| .pointer = snd_ca0106_pcm_pointer_capture, |
| }; |
| |
| static const struct snd_pcm_ops snd_ca0106_capture_1_ops = { |
| .open = snd_ca0106_pcm_open_1_capture, |
| .close = snd_ca0106_pcm_close_capture, |
| .prepare = snd_ca0106_pcm_prepare_capture, |
| .trigger = snd_ca0106_pcm_trigger_capture, |
| .pointer = snd_ca0106_pcm_pointer_capture, |
| }; |
| |
| static const struct snd_pcm_ops snd_ca0106_capture_2_ops = { |
| .open = snd_ca0106_pcm_open_2_capture, |
| .close = snd_ca0106_pcm_close_capture, |
| .prepare = snd_ca0106_pcm_prepare_capture, |
| .trigger = snd_ca0106_pcm_trigger_capture, |
| .pointer = snd_ca0106_pcm_pointer_capture, |
| }; |
| |
| static const struct snd_pcm_ops snd_ca0106_capture_3_ops = { |
| .open = snd_ca0106_pcm_open_3_capture, |
| .close = snd_ca0106_pcm_close_capture, |
| .prepare = snd_ca0106_pcm_prepare_capture, |
| .trigger = snd_ca0106_pcm_trigger_capture, |
| .pointer = snd_ca0106_pcm_pointer_capture, |
| }; |
| |
| static const struct snd_pcm_ops snd_ca0106_playback_center_lfe_ops = { |
| .open = snd_ca0106_pcm_open_playback_center_lfe, |
| .close = snd_ca0106_pcm_close_playback, |
| .prepare = snd_ca0106_pcm_prepare_playback, |
| .trigger = snd_ca0106_pcm_trigger_playback, |
| .pointer = snd_ca0106_pcm_pointer_playback, |
| }; |
| |
| static const struct snd_pcm_ops snd_ca0106_playback_unknown_ops = { |
| .open = snd_ca0106_pcm_open_playback_unknown, |
| .close = snd_ca0106_pcm_close_playback, |
| .prepare = snd_ca0106_pcm_prepare_playback, |
| .trigger = snd_ca0106_pcm_trigger_playback, |
| .pointer = snd_ca0106_pcm_pointer_playback, |
| }; |
| |
| static const struct snd_pcm_ops snd_ca0106_playback_rear_ops = { |
| .open = snd_ca0106_pcm_open_playback_rear, |
| .close = snd_ca0106_pcm_close_playback, |
| .prepare = snd_ca0106_pcm_prepare_playback, |
| .trigger = snd_ca0106_pcm_trigger_playback, |
| .pointer = snd_ca0106_pcm_pointer_playback, |
| }; |
| |
| |
| static unsigned short snd_ca0106_ac97_read(struct snd_ac97 *ac97, |
| unsigned short reg) |
| { |
| struct snd_ca0106 *emu = ac97->private_data; |
| unsigned long flags; |
| unsigned short val; |
| |
| spin_lock_irqsave(&emu->emu_lock, flags); |
| outb(reg, emu->port + AC97ADDRESS); |
| val = inw(emu->port + AC97DATA); |
| spin_unlock_irqrestore(&emu->emu_lock, flags); |
| return val; |
| } |
| |
| static void snd_ca0106_ac97_write(struct snd_ac97 *ac97, |
| unsigned short reg, unsigned short val) |
| { |
| struct snd_ca0106 *emu = ac97->private_data; |
| unsigned long flags; |
| |
| spin_lock_irqsave(&emu->emu_lock, flags); |
| outb(reg, emu->port + AC97ADDRESS); |
| outw(val, emu->port + AC97DATA); |
| spin_unlock_irqrestore(&emu->emu_lock, flags); |
| } |
| |
| static int snd_ca0106_ac97(struct snd_ca0106 *chip) |
| { |
| struct snd_ac97_bus *pbus; |
| struct snd_ac97_template ac97; |
| int err; |
| static const struct snd_ac97_bus_ops ops = { |
| .write = snd_ca0106_ac97_write, |
| .read = snd_ca0106_ac97_read, |
| }; |
| |
| if ((err = snd_ac97_bus(chip->card, 0, &ops, NULL, &pbus)) < 0) |
| return err; |
| pbus->no_vra = 1; /* we don't need VRA */ |
| |
| memset(&ac97, 0, sizeof(ac97)); |
| ac97.private_data = chip; |
| ac97.scaps = AC97_SCAP_NO_SPDIF; |
| return snd_ac97_mixer(pbus, &ac97, &chip->ac97); |
| } |
| |
| static void ca0106_stop_chip(struct snd_ca0106 *chip); |
| |
| static int snd_ca0106_free(struct snd_ca0106 *chip) |
| { |
| if (chip->res_port != NULL) { |
| /* avoid access to already used hardware */ |
| ca0106_stop_chip(chip); |
| } |
| if (chip->irq >= 0) |
| free_irq(chip->irq, chip); |
| // release the data |
| #if 1 |
| if (chip->buffer.area) |
| snd_dma_free_pages(&chip->buffer); |
| #endif |
| |
| // release the i/o port |
| release_and_free_resource(chip->res_port); |
| |
| pci_disable_device(chip->pci); |
| kfree(chip); |
| return 0; |
| } |
| |
| static int snd_ca0106_dev_free(struct snd_device *device) |
| { |
| struct snd_ca0106 *chip = device->device_data; |
| return snd_ca0106_free(chip); |
| } |
| |
| static irqreturn_t snd_ca0106_interrupt(int irq, void *dev_id) |
| { |
| unsigned int status; |
| |
| struct snd_ca0106 *chip = dev_id; |
| int i; |
| int mask; |
| unsigned int stat76; |
| struct snd_ca0106_channel *pchannel; |
| |
| status = inl(chip->port + IPR); |
| if (! status) |
| return IRQ_NONE; |
| |
| stat76 = snd_ca0106_ptr_read(chip, EXTENDED_INT, 0); |
| /* |
| dev_dbg(emu->card->dev, "interrupt status = 0x%08x, stat76=0x%08x\n", |
| status, stat76); |
| dev_dbg(emu->card->dev, "ptr=0x%08x\n", |
| snd_ca0106_ptr_read(chip, PLAYBACK_POINTER, 0)); |
| */ |
| mask = 0x11; /* 0x1 for one half, 0x10 for the other half period. */ |
| for(i = 0; i < 4; i++) { |
| pchannel = &(chip->playback_channels[i]); |
| if (stat76 & mask) { |
| /* FIXME: Select the correct substream for period elapsed */ |
| if(pchannel->use) { |
| snd_pcm_period_elapsed(pchannel->epcm->substream); |
| /* dev_dbg(emu->card->dev, "interrupt [%d] used\n", i); */ |
| } |
| } |
| /* |
| dev_dbg(emu->card->dev, "channel=%p\n", pchannel); |
| dev_dbg(emu->card->dev, "interrupt stat76[%d] = %08x, use=%d, channel=%d\n", i, stat76, pchannel->use, pchannel->number); |
| */ |
| mask <<= 1; |
| } |
| mask = 0x110000; /* 0x1 for one half, 0x10 for the other half period. */ |
| for(i = 0; i < 4; i++) { |
| pchannel = &(chip->capture_channels[i]); |
| if (stat76 & mask) { |
| /* FIXME: Select the correct substream for period elapsed */ |
| if(pchannel->use) { |
| snd_pcm_period_elapsed(pchannel->epcm->substream); |
| /* dev_dbg(emu->card->dev, "interrupt [%d] used\n", i); */ |
| } |
| } |
| /* |
| dev_dbg(emu->card->dev, "channel=%p\n", pchannel); |
| dev_dbg(emu->card->dev, "interrupt stat76[%d] = %08x, use=%d, channel=%d\n", i, stat76, pchannel->use, pchannel->number); |
| */ |
| mask <<= 1; |
| } |
| |
| snd_ca0106_ptr_write(chip, EXTENDED_INT, 0, stat76); |
| |
| if (chip->midi.dev_id && |
| (status & (chip->midi.ipr_tx|chip->midi.ipr_rx))) { |
| if (chip->midi.interrupt) |
| chip->midi.interrupt(&chip->midi, status); |
| else |
| chip->midi.interrupt_disable(&chip->midi, chip->midi.tx_enable | chip->midi.rx_enable); |
| } |
| |
| // acknowledge the interrupt if necessary |
| outl(status, chip->port+IPR); |
| |
| return IRQ_HANDLED; |
| } |
| |
| static const struct snd_pcm_chmap_elem surround_map[] = { |
| { .channels = 2, |
| .map = { SNDRV_CHMAP_RL, SNDRV_CHMAP_RR } }, |
| { } |
| }; |
| |
| static const struct snd_pcm_chmap_elem clfe_map[] = { |
| { .channels = 2, |
| .map = { SNDRV_CHMAP_FC, SNDRV_CHMAP_LFE } }, |
| { } |
| }; |
| |
| static const struct snd_pcm_chmap_elem side_map[] = { |
| { .channels = 2, |
| .map = { SNDRV_CHMAP_SL, SNDRV_CHMAP_SR } }, |
| { } |
| }; |
| |
| static int snd_ca0106_pcm(struct snd_ca0106 *emu, int device) |
| { |
| struct snd_pcm *pcm; |
| struct snd_pcm_substream *substream; |
| const struct snd_pcm_chmap_elem *map = NULL; |
| int err; |
| |
| err = snd_pcm_new(emu->card, "ca0106", device, 1, 1, &pcm); |
| if (err < 0) |
| return err; |
| |
| pcm->private_data = emu; |
| |
| switch (device) { |
| case 0: |
| snd_pcm_set_ops(pcm, SNDRV_PCM_STREAM_PLAYBACK, &snd_ca0106_playback_front_ops); |
| snd_pcm_set_ops(pcm, SNDRV_PCM_STREAM_CAPTURE, &snd_ca0106_capture_0_ops); |
| map = snd_pcm_std_chmaps; |
| break; |
| case 1: |
| snd_pcm_set_ops(pcm, SNDRV_PCM_STREAM_PLAYBACK, &snd_ca0106_playback_rear_ops); |
| snd_pcm_set_ops(pcm, SNDRV_PCM_STREAM_CAPTURE, &snd_ca0106_capture_1_ops); |
| map = surround_map; |
| break; |
| case 2: |
| snd_pcm_set_ops(pcm, SNDRV_PCM_STREAM_PLAYBACK, &snd_ca0106_playback_center_lfe_ops); |
| snd_pcm_set_ops(pcm, SNDRV_PCM_STREAM_CAPTURE, &snd_ca0106_capture_2_ops); |
| map = clfe_map; |
| break; |
| case 3: |
| snd_pcm_set_ops(pcm, SNDRV_PCM_STREAM_PLAYBACK, &snd_ca0106_playback_unknown_ops); |
| snd_pcm_set_ops(pcm, SNDRV_PCM_STREAM_CAPTURE, &snd_ca0106_capture_3_ops); |
| map = side_map; |
| break; |
| } |
| |
| pcm->info_flags = 0; |
| strcpy(pcm->name, "CA0106"); |
| |
| for(substream = pcm->streams[SNDRV_PCM_STREAM_PLAYBACK].substream; |
| substream; |
| substream = substream->next) { |
| snd_pcm_set_managed_buffer(substream, SNDRV_DMA_TYPE_DEV, |
| &emu->pci->dev, |
| 64*1024, 64*1024); |
| } |
| |
| for (substream = pcm->streams[SNDRV_PCM_STREAM_CAPTURE].substream; |
| substream; |
| substream = substream->next) { |
| snd_pcm_set_managed_buffer(substream, SNDRV_DMA_TYPE_DEV, |
| &emu->pci->dev, |
| 64*1024, 64*1024); |
| } |
| |
| err = snd_pcm_add_chmap_ctls(pcm, SNDRV_PCM_STREAM_PLAYBACK, map, 2, |
| 1 << 2, NULL); |
| if (err < 0) |
| return err; |
| |
| emu->pcm[device] = pcm; |
| |
| return 0; |
| } |
| |
| #define SPI_REG(reg, value) (((reg) << SPI_REG_SHIFT) | (value)) |
| static const unsigned int spi_dac_init[] = { |
| SPI_REG(SPI_LDA1_REG, SPI_DA_BIT_0dB), /* 0dB dig. attenuation */ |
| SPI_REG(SPI_RDA1_REG, SPI_DA_BIT_0dB), |
| SPI_REG(SPI_PL_REG, SPI_PL_BIT_L_L | SPI_PL_BIT_R_R | SPI_IZD_BIT), |
| SPI_REG(SPI_FMT_REG, SPI_FMT_BIT_I2S | SPI_IWL_BIT_24), |
| SPI_REG(SPI_LDA2_REG, SPI_DA_BIT_0dB), |
| SPI_REG(SPI_RDA2_REG, SPI_DA_BIT_0dB), |
| SPI_REG(SPI_LDA3_REG, SPI_DA_BIT_0dB), |
| SPI_REG(SPI_RDA3_REG, SPI_DA_BIT_0dB), |
| SPI_REG(SPI_MASTDA_REG, SPI_DA_BIT_0dB), |
| SPI_REG(9, 0x00), |
| SPI_REG(SPI_MS_REG, SPI_DACD0_BIT | SPI_DACD1_BIT | SPI_DACD2_BIT), |
| SPI_REG(12, 0x00), |
| SPI_REG(SPI_LDA4_REG, SPI_DA_BIT_0dB), |
| SPI_REG(SPI_RDA4_REG, SPI_DA_BIT_0dB | SPI_DA_BIT_UPDATE), |
| SPI_REG(SPI_DACD4_REG, SPI_DACD4_BIT), |
| }; |
| |
| static const unsigned int i2c_adc_init[][2] = { |
| { 0x17, 0x00 }, /* Reset */ |
| { 0x07, 0x00 }, /* Timeout */ |
| { 0x0b, 0x22 }, /* Interface control */ |
| { 0x0c, 0x22 }, /* Master mode control */ |
| { 0x0d, 0x08 }, /* Powerdown control */ |
| { 0x0e, 0xcf }, /* Attenuation Left 0x01 = -103dB, 0xff = 24dB */ |
| { 0x0f, 0xcf }, /* Attenuation Right 0.5dB steps */ |
| { 0x10, 0x7b }, /* ALC Control 1 */ |
| { 0x11, 0x00 }, /* ALC Control 2 */ |
| { 0x12, 0x32 }, /* ALC Control 3 */ |
| { 0x13, 0x00 }, /* Noise gate control */ |
| { 0x14, 0xa6 }, /* Limiter control */ |
| { 0x15, ADC_MUX_LINEIN }, /* ADC Mixer control */ |
| }; |
| |
| static void ca0106_init_chip(struct snd_ca0106 *chip, int resume) |
| { |
| int ch; |
| unsigned int def_bits; |
| |
| outl(0, chip->port + INTE); |
| |
| /* |
| * Init to 0x02109204 : |
| * Clock accuracy = 0 (1000ppm) |
| * Sample Rate = 2 (48kHz) |
| * Audio Channel = 1 (Left of 2) |
| * Source Number = 0 (Unspecified) |
| * Generation Status = 1 (Original for Cat Code 12) |
| * Cat Code = 12 (Digital Signal Mixer) |
| * Mode = 0 (Mode 0) |
| * Emphasis = 0 (None) |
| * CP = 1 (Copyright unasserted) |
| * AN = 0 (Audio data) |
| * P = 0 (Consumer) |
| */ |
| def_bits = |
| SPCS_CLKACCY_1000PPM | SPCS_SAMPLERATE_48 | |
| SPCS_CHANNELNUM_LEFT | SPCS_SOURCENUM_UNSPEC | |
| SPCS_GENERATIONSTATUS | 0x00001200 | |
| 0x00000000 | SPCS_EMPHASIS_NONE | SPCS_COPYRIGHT; |
| if (!resume) { |
| chip->spdif_str_bits[0] = chip->spdif_bits[0] = def_bits; |
| chip->spdif_str_bits[1] = chip->spdif_bits[1] = def_bits; |
| chip->spdif_str_bits[2] = chip->spdif_bits[2] = def_bits; |
| chip->spdif_str_bits[3] = chip->spdif_bits[3] = def_bits; |
| } |
| /* Only SPCS1 has been tested */ |
| snd_ca0106_ptr_write(chip, SPCS1, 0, chip->spdif_str_bits[1]); |
| snd_ca0106_ptr_write(chip, SPCS0, 0, chip->spdif_str_bits[0]); |
| snd_ca0106_ptr_write(chip, SPCS2, 0, chip->spdif_str_bits[2]); |
| snd_ca0106_ptr_write(chip, SPCS3, 0, chip->spdif_str_bits[3]); |
| |
| snd_ca0106_ptr_write(chip, PLAYBACK_MUTE, 0, 0x00fc0000); |
| snd_ca0106_ptr_write(chip, CAPTURE_MUTE, 0, 0x00fc0000); |
| |
| /* Write 0x8000 to AC97_REC_GAIN to mute it. */ |
| outb(AC97_REC_GAIN, chip->port + AC97ADDRESS); |
| outw(0x8000, chip->port + AC97DATA); |
| #if 0 /* FIXME: what are these? */ |
| snd_ca0106_ptr_write(chip, SPCS0, 0, 0x2108006); |
| snd_ca0106_ptr_write(chip, 0x42, 0, 0x2108006); |
| snd_ca0106_ptr_write(chip, 0x43, 0, 0x2108006); |
| snd_ca0106_ptr_write(chip, 0x44, 0, 0x2108006); |
| #endif |
| |
| /* OSS drivers set this. */ |
| /* snd_ca0106_ptr_write(chip, SPDIF_SELECT2, 0, 0xf0f003f); */ |
| |
| /* Analog or Digital output */ |
| snd_ca0106_ptr_write(chip, SPDIF_SELECT1, 0, 0xf); |
| /* 0x0b000000 for digital, 0x000b0000 for analog, from win2000 drivers. |
| * Use 0x000f0000 for surround71 |
| */ |
| snd_ca0106_ptr_write(chip, SPDIF_SELECT2, 0, 0x000f0000); |
| |
| chip->spdif_enable = 0; /* Set digital SPDIF output off */ |
| /*snd_ca0106_ptr_write(chip, 0x45, 0, 0);*/ /* Analogue out */ |
| /*snd_ca0106_ptr_write(chip, 0x45, 0, 0xf00);*/ /* Digital out */ |
| |
| /* goes to 0x40c80000 when doing SPDIF IN/OUT */ |
| snd_ca0106_ptr_write(chip, CAPTURE_CONTROL, 0, 0x40c81000); |
| /* (Mute) CAPTURE feedback into PLAYBACK volume. |
| * Only lower 16 bits matter. |
| */ |
| snd_ca0106_ptr_write(chip, CAPTURE_CONTROL, 1, 0xffffffff); |
| /* SPDIF IN Volume */ |
| snd_ca0106_ptr_write(chip, CAPTURE_CONTROL, 2, 0x30300000); |
| /* SPDIF IN Volume, 0x70 = (vol & 0x3f) | 0x40 */ |
| snd_ca0106_ptr_write(chip, CAPTURE_CONTROL, 3, 0x00700000); |
| |
| snd_ca0106_ptr_write(chip, PLAYBACK_ROUTING1, 0, 0x32765410); |
| snd_ca0106_ptr_write(chip, PLAYBACK_ROUTING2, 0, 0x76767676); |
| snd_ca0106_ptr_write(chip, CAPTURE_ROUTING1, 0, 0x32765410); |
| snd_ca0106_ptr_write(chip, CAPTURE_ROUTING2, 0, 0x76767676); |
| |
| for (ch = 0; ch < 4; ch++) { |
| /* Only high 16 bits matter */ |
| snd_ca0106_ptr_write(chip, CAPTURE_VOLUME1, ch, 0x30303030); |
| snd_ca0106_ptr_write(chip, CAPTURE_VOLUME2, ch, 0x30303030); |
| #if 0 /* Mute */ |
| snd_ca0106_ptr_write(chip, PLAYBACK_VOLUME1, ch, 0x40404040); |
| snd_ca0106_ptr_write(chip, PLAYBACK_VOLUME2, ch, 0x40404040); |
| snd_ca0106_ptr_write(chip, PLAYBACK_VOLUME1, ch, 0xffffffff); |
| snd_ca0106_ptr_write(chip, PLAYBACK_VOLUME2, ch, 0xffffffff); |
| #endif |
| } |
| if (chip->details->i2c_adc == 1) { |
| /* Select MIC, Line in, TAD in, AUX in */ |
| snd_ca0106_ptr_write(chip, CAPTURE_SOURCE, 0x0, 0x333300e4); |
| /* Default to CAPTURE_SOURCE to i2s in */ |
| if (!resume) |
| chip->capture_source = 3; |
| } else if (chip->details->ac97 == 1) { |
| /* Default to AC97 in */ |
| snd_ca0106_ptr_write(chip, CAPTURE_SOURCE, 0x0, 0x444400e4); |
| /* Default to CAPTURE_SOURCE to AC97 in */ |
| if (!resume) |
| chip->capture_source = 4; |
| } else { |
| /* Select MIC, Line in, TAD in, AUX in */ |
| snd_ca0106_ptr_write(chip, CAPTURE_SOURCE, 0x0, 0x333300e4); |
| /* Default to Set CAPTURE_SOURCE to i2s in */ |
| if (!resume) |
| chip->capture_source = 3; |
| } |
| |
| if (chip->details->gpio_type == 2) { |
| /* The SB0438 use GPIO differently. */ |
| /* FIXME: Still need to find out what the other GPIO bits do. |
| * E.g. For digital spdif out. |
| */ |
| outl(0x0, chip->port+GPIO); |
| /* outl(0x00f0e000, chip->port+GPIO); */ /* Analog */ |
| outl(0x005f5301, chip->port+GPIO); /* Analog */ |
| } else if (chip->details->gpio_type == 1) { |
| /* The SB0410 and SB0413 use GPIO differently. */ |
| /* FIXME: Still need to find out what the other GPIO bits do. |
| * E.g. For digital spdif out. |
| */ |
| outl(0x0, chip->port+GPIO); |
| /* outl(0x00f0e000, chip->port+GPIO); */ /* Analog */ |
| outl(0x005f5301, chip->port+GPIO); /* Analog */ |
| } else { |
| outl(0x0, chip->port+GPIO); |
| outl(0x005f03a3, chip->port+GPIO); /* Analog */ |
| /* outl(0x005f02a2, chip->port+GPIO); */ /* SPDIF */ |
| } |
| snd_ca0106_intr_enable(chip, 0x105); /* Win2000 uses 0x1e0 */ |
| |
| /* outl(HCFG_LOCKSOUNDCACHE|HCFG_AUDIOENABLE, chip->port+HCFG); */ |
| /* 0x1000 causes AC3 to fails. Maybe it effects 24 bit output. */ |
| /* outl(0x00001409, chip->port+HCFG); */ |
| /* outl(0x00000009, chip->port+HCFG); */ |
| /* AC97 2.0, Enable outputs. */ |
| outl(HCFG_AC97 | HCFG_AUDIOENABLE, chip->port+HCFG); |
| |
| if (chip->details->i2c_adc == 1) { |
| /* The SB0410 and SB0413 use I2C to control ADC. */ |
| int size, n; |
| |
| size = ARRAY_SIZE(i2c_adc_init); |
| /* dev_dbg(emu->card->dev, "I2C:array size=0x%x\n", size); */ |
| for (n = 0; n < size; n++) |
| snd_ca0106_i2c_write(chip, i2c_adc_init[n][0], |
| i2c_adc_init[n][1]); |
| for (n = 0; n < 4; n++) { |
| chip->i2c_capture_volume[n][0] = 0xcf; |
| chip->i2c_capture_volume[n][1] = 0xcf; |
| } |
| chip->i2c_capture_source = 2; /* Line in */ |
| /* Enable Line-in capture. MIC in currently untested. */ |
| /* snd_ca0106_i2c_write(chip, ADC_MUX, ADC_MUX_LINEIN); */ |
| } |
| |
| if (chip->details->spi_dac) { |
| /* The SB0570 use SPI to control DAC. */ |
| int size, n; |
| |
| size = ARRAY_SIZE(spi_dac_init); |
| for (n = 0; n < size; n++) { |
| int reg = spi_dac_init[n] >> SPI_REG_SHIFT; |
| |
| snd_ca0106_spi_write(chip, spi_dac_init[n]); |
| if (reg < ARRAY_SIZE(chip->spi_dac_reg)) |
| chip->spi_dac_reg[reg] = spi_dac_init[n]; |
| } |
| |
| /* Enable front dac only */ |
| snd_ca0106_pcm_power_dac(chip, PCM_FRONT_CHANNEL, 1); |
| } |
| } |
| |
| static void ca0106_stop_chip(struct snd_ca0106 *chip) |
| { |
| /* disable interrupts */ |
| snd_ca0106_ptr_write(chip, BASIC_INTERRUPT, 0, 0); |
| outl(0, chip->port + INTE); |
| snd_ca0106_ptr_write(chip, EXTENDED_INT_MASK, 0, 0); |
| udelay(1000); |
| /* disable audio */ |
| /* outl(HCFG_LOCKSOUNDCACHE, chip->port + HCFG); */ |
| outl(0, chip->port + HCFG); |
| /* FIXME: We need to stop and DMA transfers here. |
| * But as I am not sure how yet, we cannot from the dma pages. |
| * So we can fix: snd-malloc: Memory leak? pages not freed = 8 |
| */ |
| } |
| |
| static int snd_ca0106_create(int dev, struct snd_card *card, |
| struct pci_dev *pci, |
| struct snd_ca0106 **rchip) |
| { |
| struct snd_ca0106 *chip; |
| const struct snd_ca0106_details *c; |
| int err; |
| static const struct snd_device_ops ops = { |
| .dev_free = snd_ca0106_dev_free, |
| }; |
| |
| *rchip = NULL; |
| |
| err = pci_enable_device(pci); |
| if (err < 0) |
| return err; |
| if (dma_set_mask(&pci->dev, DMA_BIT_MASK(32)) < 0 || |
| dma_set_coherent_mask(&pci->dev, DMA_BIT_MASK(32)) < 0) { |
| dev_err(card->dev, "error to set 32bit mask DMA\n"); |
| pci_disable_device(pci); |
| return -ENXIO; |
| } |
| |
| chip = kzalloc(sizeof(*chip), GFP_KERNEL); |
| if (chip == NULL) { |
| pci_disable_device(pci); |
| return -ENOMEM; |
| } |
| |
| chip->card = card; |
| chip->pci = pci; |
| chip->irq = -1; |
| |
| spin_lock_init(&chip->emu_lock); |
| |
| chip->port = pci_resource_start(pci, 0); |
| chip->res_port = request_region(chip->port, 0x20, "snd_ca0106"); |
| if (!chip->res_port) { |
| snd_ca0106_free(chip); |
| dev_err(card->dev, "cannot allocate the port\n"); |
| return -EBUSY; |
| } |
| |
| if (request_irq(pci->irq, snd_ca0106_interrupt, |
| IRQF_SHARED, KBUILD_MODNAME, chip)) { |
| snd_ca0106_free(chip); |
| dev_err(card->dev, "cannot grab irq\n"); |
| return -EBUSY; |
| } |
| chip->irq = pci->irq; |
| card->sync_irq = chip->irq; |
| |
| /* This stores the periods table. */ |
| if (snd_dma_alloc_pages(SNDRV_DMA_TYPE_DEV, &pci->dev, |
| 1024, &chip->buffer) < 0) { |
| snd_ca0106_free(chip); |
| return -ENOMEM; |
| } |
| |
| pci_set_master(pci); |
| /* read serial */ |
| pci_read_config_dword(pci, PCI_SUBSYSTEM_VENDOR_ID, &chip->serial); |
| pci_read_config_word(pci, PCI_SUBSYSTEM_ID, &chip->model); |
| dev_info(card->dev, "Model %04x Rev %08x Serial %08x\n", |
| chip->model, pci->revision, chip->serial); |
| strcpy(card->driver, "CA0106"); |
| strcpy(card->shortname, "CA0106"); |
| |
| for (c = ca0106_chip_details; c->serial; c++) { |
| if (subsystem[dev]) { |
| if (c->serial == subsystem[dev]) |
| break; |
| } else if (c->serial == chip->serial) |
| break; |
| } |
| chip->details = c; |
| if (subsystem[dev]) { |
| dev_info(card->dev, "Sound card name=%s, " |
| "subsystem=0x%x. Forced to subsystem=0x%x\n", |
| c->name, chip->serial, subsystem[dev]); |
| } |
| |
| sprintf(card->longname, "%s at 0x%lx irq %i", |
| c->name, chip->port, chip->irq); |
| |
| ca0106_init_chip(chip, 0); |
| |
| err = snd_device_new(card, SNDRV_DEV_LOWLEVEL, chip, &ops); |
| if (err < 0) { |
| snd_ca0106_free(chip); |
| return err; |
| } |
| *rchip = chip; |
| return 0; |
| } |
| |
| |
| static void ca0106_midi_interrupt_enable(struct snd_ca_midi *midi, int intr) |
| { |
| snd_ca0106_intr_enable((struct snd_ca0106 *)(midi->dev_id), intr); |
| } |
| |
| static void ca0106_midi_interrupt_disable(struct snd_ca_midi *midi, int intr) |
| { |
| snd_ca0106_intr_disable((struct snd_ca0106 *)(midi->dev_id), intr); |
| } |
| |
| static unsigned char ca0106_midi_read(struct snd_ca_midi *midi, int idx) |
| { |
| return (unsigned char)snd_ca0106_ptr_read((struct snd_ca0106 *)(midi->dev_id), |
| midi->port + idx, 0); |
| } |
| |
| static void ca0106_midi_write(struct snd_ca_midi *midi, int data, int idx) |
| { |
| snd_ca0106_ptr_write((struct snd_ca0106 *)(midi->dev_id), midi->port + idx, 0, data); |
| } |
| |
| static struct snd_card *ca0106_dev_id_card(void *dev_id) |
| { |
| return ((struct snd_ca0106 *)dev_id)->card; |
| } |
| |
| static int ca0106_dev_id_port(void *dev_id) |
| { |
| return ((struct snd_ca0106 *)dev_id)->port; |
| } |
| |
| static int snd_ca0106_midi(struct snd_ca0106 *chip, unsigned int channel) |
| { |
| struct snd_ca_midi *midi; |
| char *name; |
| int err; |
| |
| if (channel == CA0106_MIDI_CHAN_B) { |
| name = "CA0106 MPU-401 (UART) B"; |
| midi = &chip->midi2; |
| midi->tx_enable = INTE_MIDI_TX_B; |
| midi->rx_enable = INTE_MIDI_RX_B; |
| midi->ipr_tx = IPR_MIDI_TX_B; |
| midi->ipr_rx = IPR_MIDI_RX_B; |
| midi->port = MIDI_UART_B_DATA; |
| } else { |
| name = "CA0106 MPU-401 (UART)"; |
| midi = &chip->midi; |
| midi->tx_enable = INTE_MIDI_TX_A; |
| midi->rx_enable = INTE_MIDI_TX_B; |
| midi->ipr_tx = IPR_MIDI_TX_A; |
| midi->ipr_rx = IPR_MIDI_RX_A; |
| midi->port = MIDI_UART_A_DATA; |
| } |
| |
| midi->reset = CA0106_MPU401_RESET; |
| midi->enter_uart = CA0106_MPU401_ENTER_UART; |
| midi->ack = CA0106_MPU401_ACK; |
| |
| midi->input_avail = CA0106_MIDI_INPUT_AVAIL; |
| midi->output_ready = CA0106_MIDI_OUTPUT_READY; |
| |
| midi->channel = channel; |
| |
| midi->interrupt_enable = ca0106_midi_interrupt_enable; |
| midi->interrupt_disable = ca0106_midi_interrupt_disable; |
| |
| midi->read = ca0106_midi_read; |
| midi->write = ca0106_midi_write; |
| |
| midi->get_dev_id_card = ca0106_dev_id_card; |
| midi->get_dev_id_port = ca0106_dev_id_port; |
| |
| midi->dev_id = chip; |
| |
| if ((err = ca_midi_init(chip, midi, 0, name)) < 0) |
| return err; |
| |
| return 0; |
| } |
| |
| |
| static int snd_ca0106_probe(struct pci_dev *pci, |
| const struct pci_device_id *pci_id) |
| { |
| static int dev; |
| struct snd_card *card; |
| struct snd_ca0106 *chip; |
| int i, err; |
| |
| if (dev >= SNDRV_CARDS) |
| return -ENODEV; |
| if (!enable[dev]) { |
| dev++; |
| return -ENOENT; |
| } |
| |
| err = snd_card_new(&pci->dev, index[dev], id[dev], THIS_MODULE, |
| 0, &card); |
| if (err < 0) |
| return err; |
| |
| err = snd_ca0106_create(dev, card, pci, &chip); |
| if (err < 0) |
| goto error; |
| card->private_data = chip; |
| |
| for (i = 0; i < 4; i++) { |
| err = snd_ca0106_pcm(chip, i); |
| if (err < 0) |
| goto error; |
| } |
| |
| if (chip->details->ac97 == 1) { |
| /* The SB0410 and SB0413 do not have an AC97 chip. */ |
| err = snd_ca0106_ac97(chip); |
| if (err < 0) |
| goto error; |
| } |
| err = snd_ca0106_mixer(chip); |
| if (err < 0) |
| goto error; |
| |
| dev_dbg(card->dev, "probe for MIDI channel A ..."); |
| err = snd_ca0106_midi(chip, CA0106_MIDI_CHAN_A); |
| if (err < 0) |
| goto error; |
| dev_dbg(card->dev, " done.\n"); |
| |
| #ifdef CONFIG_SND_PROC_FS |
| snd_ca0106_proc_init(chip); |
| #endif |
| |
| err = snd_card_register(card); |
| if (err < 0) |
| goto error; |
| |
| pci_set_drvdata(pci, card); |
| dev++; |
| return 0; |
| |
| error: |
| snd_card_free(card); |
| return err; |
| } |
| |
| static void snd_ca0106_remove(struct pci_dev *pci) |
| { |
| snd_card_free(pci_get_drvdata(pci)); |
| } |
| |
| #ifdef CONFIG_PM_SLEEP |
| static int snd_ca0106_suspend(struct device *dev) |
| { |
| struct snd_card *card = dev_get_drvdata(dev); |
| struct snd_ca0106 *chip = card->private_data; |
| |
| snd_power_change_state(card, SNDRV_CTL_POWER_D3hot); |
| if (chip->details->ac97) |
| snd_ac97_suspend(chip->ac97); |
| snd_ca0106_mixer_suspend(chip); |
| |
| ca0106_stop_chip(chip); |
| return 0; |
| } |
| |
| static int snd_ca0106_resume(struct device *dev) |
| { |
| struct snd_card *card = dev_get_drvdata(dev); |
| struct snd_ca0106 *chip = card->private_data; |
| int i; |
| |
| ca0106_init_chip(chip, 1); |
| |
| if (chip->details->ac97) |
| snd_ac97_resume(chip->ac97); |
| snd_ca0106_mixer_resume(chip); |
| if (chip->details->spi_dac) { |
| for (i = 0; i < ARRAY_SIZE(chip->spi_dac_reg); i++) |
| snd_ca0106_spi_write(chip, chip->spi_dac_reg[i]); |
| } |
| |
| snd_power_change_state(card, SNDRV_CTL_POWER_D0); |
| return 0; |
| } |
| |
| static SIMPLE_DEV_PM_OPS(snd_ca0106_pm, snd_ca0106_suspend, snd_ca0106_resume); |
| #define SND_CA0106_PM_OPS &snd_ca0106_pm |
| #else |
| #define SND_CA0106_PM_OPS NULL |
| #endif |
| |
| // PCI IDs |
| static const struct pci_device_id snd_ca0106_ids[] = { |
| { PCI_VDEVICE(CREATIVE, 0x0007), 0 }, /* Audigy LS or Live 24bit */ |
| { 0, } |
| }; |
| MODULE_DEVICE_TABLE(pci, snd_ca0106_ids); |
| |
| // pci_driver definition |
| static struct pci_driver ca0106_driver = { |
| .name = KBUILD_MODNAME, |
| .id_table = snd_ca0106_ids, |
| .probe = snd_ca0106_probe, |
| .remove = snd_ca0106_remove, |
| .driver = { |
| .pm = SND_CA0106_PM_OPS, |
| }, |
| }; |
| |
| module_pci_driver(ca0106_driver); |