| // SPDX-License-Identifier: GPL-2.0-only |
| /* |
| * Copyright (c) 2009, Microsoft Corporation. |
| * |
| * Authors: |
| * Haiyang Zhang <haiyangz@microsoft.com> |
| * Hank Janssen <hjanssen@microsoft.com> |
| */ |
| #define pr_fmt(fmt) KBUILD_MODNAME ": " fmt |
| |
| #include <linux/kernel.h> |
| #include <linux/mm.h> |
| #include <linux/slab.h> |
| #include <linux/vmalloc.h> |
| #include <linux/hyperv.h> |
| #include <linux/random.h> |
| #include <linux/clockchips.h> |
| #include <linux/delay.h> |
| #include <linux/interrupt.h> |
| #include <clocksource/hyperv_timer.h> |
| #include <asm/mshyperv.h> |
| #include "hyperv_vmbus.h" |
| |
| /* The one and only */ |
| struct hv_context hv_context; |
| |
| /* |
| * hv_init - Main initialization routine. |
| * |
| * This routine must be called before any other routines in here are called |
| */ |
| int hv_init(void) |
| { |
| hv_context.cpu_context = alloc_percpu(struct hv_per_cpu_context); |
| if (!hv_context.cpu_context) |
| return -ENOMEM; |
| return 0; |
| } |
| |
| /* |
| * Functions for allocating and freeing memory with size and |
| * alignment HV_HYP_PAGE_SIZE. These functions are needed because |
| * the guest page size may not be the same as the Hyper-V page |
| * size. We depend upon kmalloc() aligning power-of-two size |
| * allocations to the allocation size boundary, so that the |
| * allocated memory appears to Hyper-V as a page of the size |
| * it expects. |
| */ |
| |
| void *hv_alloc_hyperv_page(void) |
| { |
| BUILD_BUG_ON(PAGE_SIZE < HV_HYP_PAGE_SIZE); |
| |
| if (PAGE_SIZE == HV_HYP_PAGE_SIZE) |
| return (void *)__get_free_page(GFP_KERNEL); |
| else |
| return kmalloc(HV_HYP_PAGE_SIZE, GFP_KERNEL); |
| } |
| |
| void *hv_alloc_hyperv_zeroed_page(void) |
| { |
| if (PAGE_SIZE == HV_HYP_PAGE_SIZE) |
| return (void *)__get_free_page(GFP_KERNEL | __GFP_ZERO); |
| else |
| return kzalloc(HV_HYP_PAGE_SIZE, GFP_KERNEL); |
| } |
| |
| void hv_free_hyperv_page(unsigned long addr) |
| { |
| if (PAGE_SIZE == HV_HYP_PAGE_SIZE) |
| free_page(addr); |
| else |
| kfree((void *)addr); |
| } |
| |
| /* |
| * hv_post_message - Post a message using the hypervisor message IPC. |
| * |
| * This involves a hypercall. |
| */ |
| int hv_post_message(union hv_connection_id connection_id, |
| enum hv_message_type message_type, |
| void *payload, size_t payload_size) |
| { |
| struct hv_input_post_message *aligned_msg; |
| struct hv_per_cpu_context *hv_cpu; |
| u64 status; |
| |
| if (payload_size > HV_MESSAGE_PAYLOAD_BYTE_COUNT) |
| return -EMSGSIZE; |
| |
| hv_cpu = get_cpu_ptr(hv_context.cpu_context); |
| aligned_msg = hv_cpu->post_msg_page; |
| aligned_msg->connectionid = connection_id; |
| aligned_msg->reserved = 0; |
| aligned_msg->message_type = message_type; |
| aligned_msg->payload_size = payload_size; |
| memcpy((void *)aligned_msg->payload, payload, payload_size); |
| |
| status = hv_do_hypercall(HVCALL_POST_MESSAGE, aligned_msg, NULL); |
| |
| /* Preemption must remain disabled until after the hypercall |
| * so some other thread can't get scheduled onto this cpu and |
| * corrupt the per-cpu post_msg_page |
| */ |
| put_cpu_ptr(hv_cpu); |
| |
| return hv_result(status); |
| } |
| |
| int hv_synic_alloc(void) |
| { |
| int cpu; |
| struct hv_per_cpu_context *hv_cpu; |
| |
| /* |
| * First, zero all per-cpu memory areas so hv_synic_free() can |
| * detect what memory has been allocated and cleanup properly |
| * after any failures. |
| */ |
| for_each_present_cpu(cpu) { |
| hv_cpu = per_cpu_ptr(hv_context.cpu_context, cpu); |
| memset(hv_cpu, 0, sizeof(*hv_cpu)); |
| } |
| |
| hv_context.hv_numa_map = kcalloc(nr_node_ids, sizeof(struct cpumask), |
| GFP_KERNEL); |
| if (hv_context.hv_numa_map == NULL) { |
| pr_err("Unable to allocate NUMA map\n"); |
| goto err; |
| } |
| |
| for_each_present_cpu(cpu) { |
| hv_cpu = per_cpu_ptr(hv_context.cpu_context, cpu); |
| |
| tasklet_init(&hv_cpu->msg_dpc, |
| vmbus_on_msg_dpc, (unsigned long) hv_cpu); |
| |
| hv_cpu->synic_message_page = |
| (void *)get_zeroed_page(GFP_ATOMIC); |
| if (hv_cpu->synic_message_page == NULL) { |
| pr_err("Unable to allocate SYNIC message page\n"); |
| goto err; |
| } |
| |
| hv_cpu->synic_event_page = (void *)get_zeroed_page(GFP_ATOMIC); |
| if (hv_cpu->synic_event_page == NULL) { |
| pr_err("Unable to allocate SYNIC event page\n"); |
| goto err; |
| } |
| |
| hv_cpu->post_msg_page = (void *)get_zeroed_page(GFP_ATOMIC); |
| if (hv_cpu->post_msg_page == NULL) { |
| pr_err("Unable to allocate post msg page\n"); |
| goto err; |
| } |
| } |
| |
| return 0; |
| err: |
| /* |
| * Any memory allocations that succeeded will be freed when |
| * the caller cleans up by calling hv_synic_free() |
| */ |
| return -ENOMEM; |
| } |
| |
| |
| void hv_synic_free(void) |
| { |
| int cpu; |
| |
| for_each_present_cpu(cpu) { |
| struct hv_per_cpu_context *hv_cpu |
| = per_cpu_ptr(hv_context.cpu_context, cpu); |
| |
| free_page((unsigned long)hv_cpu->synic_event_page); |
| free_page((unsigned long)hv_cpu->synic_message_page); |
| free_page((unsigned long)hv_cpu->post_msg_page); |
| } |
| |
| kfree(hv_context.hv_numa_map); |
| } |
| |
| /* |
| * hv_synic_init - Initialize the Synthetic Interrupt Controller. |
| * |
| * If it is already initialized by another entity (ie x2v shim), we need to |
| * retrieve the initialized message and event pages. Otherwise, we create and |
| * initialize the message and event pages. |
| */ |
| void hv_synic_enable_regs(unsigned int cpu) |
| { |
| struct hv_per_cpu_context *hv_cpu |
| = per_cpu_ptr(hv_context.cpu_context, cpu); |
| union hv_synic_simp simp; |
| union hv_synic_siefp siefp; |
| union hv_synic_sint shared_sint; |
| union hv_synic_scontrol sctrl; |
| |
| /* Setup the Synic's message page */ |
| simp.as_uint64 = hv_get_register(HV_REGISTER_SIMP); |
| simp.simp_enabled = 1; |
| simp.base_simp_gpa = virt_to_phys(hv_cpu->synic_message_page) |
| >> HV_HYP_PAGE_SHIFT; |
| |
| hv_set_register(HV_REGISTER_SIMP, simp.as_uint64); |
| |
| /* Setup the Synic's event page */ |
| siefp.as_uint64 = hv_get_register(HV_REGISTER_SIEFP); |
| siefp.siefp_enabled = 1; |
| siefp.base_siefp_gpa = virt_to_phys(hv_cpu->synic_event_page) |
| >> HV_HYP_PAGE_SHIFT; |
| |
| hv_set_register(HV_REGISTER_SIEFP, siefp.as_uint64); |
| |
| /* Setup the shared SINT. */ |
| if (vmbus_irq != -1) |
| enable_percpu_irq(vmbus_irq, 0); |
| shared_sint.as_uint64 = hv_get_register(HV_REGISTER_SINT0 + |
| VMBUS_MESSAGE_SINT); |
| |
| shared_sint.vector = vmbus_interrupt; |
| shared_sint.masked = false; |
| |
| /* |
| * On architectures where Hyper-V doesn't support AEOI (e.g., ARM64), |
| * it doesn't provide a recommendation flag and AEOI must be disabled. |
| */ |
| #ifdef HV_DEPRECATING_AEOI_RECOMMENDED |
| shared_sint.auto_eoi = |
| !(ms_hyperv.hints & HV_DEPRECATING_AEOI_RECOMMENDED); |
| #else |
| shared_sint.auto_eoi = 0; |
| #endif |
| hv_set_register(HV_REGISTER_SINT0 + VMBUS_MESSAGE_SINT, |
| shared_sint.as_uint64); |
| |
| /* Enable the global synic bit */ |
| sctrl.as_uint64 = hv_get_register(HV_REGISTER_SCONTROL); |
| sctrl.enable = 1; |
| |
| hv_set_register(HV_REGISTER_SCONTROL, sctrl.as_uint64); |
| } |
| |
| int hv_synic_init(unsigned int cpu) |
| { |
| hv_synic_enable_regs(cpu); |
| |
| hv_stimer_legacy_init(cpu, VMBUS_MESSAGE_SINT); |
| |
| return 0; |
| } |
| |
| /* |
| * hv_synic_cleanup - Cleanup routine for hv_synic_init(). |
| */ |
| void hv_synic_disable_regs(unsigned int cpu) |
| { |
| union hv_synic_sint shared_sint; |
| union hv_synic_simp simp; |
| union hv_synic_siefp siefp; |
| union hv_synic_scontrol sctrl; |
| |
| shared_sint.as_uint64 = hv_get_register(HV_REGISTER_SINT0 + |
| VMBUS_MESSAGE_SINT); |
| |
| shared_sint.masked = 1; |
| |
| /* Need to correctly cleanup in the case of SMP!!! */ |
| /* Disable the interrupt */ |
| hv_set_register(HV_REGISTER_SINT0 + VMBUS_MESSAGE_SINT, |
| shared_sint.as_uint64); |
| |
| simp.as_uint64 = hv_get_register(HV_REGISTER_SIMP); |
| simp.simp_enabled = 0; |
| simp.base_simp_gpa = 0; |
| |
| hv_set_register(HV_REGISTER_SIMP, simp.as_uint64); |
| |
| siefp.as_uint64 = hv_get_register(HV_REGISTER_SIEFP); |
| siefp.siefp_enabled = 0; |
| siefp.base_siefp_gpa = 0; |
| |
| hv_set_register(HV_REGISTER_SIEFP, siefp.as_uint64); |
| |
| /* Disable the global synic bit */ |
| sctrl.as_uint64 = hv_get_register(HV_REGISTER_SCONTROL); |
| sctrl.enable = 0; |
| hv_set_register(HV_REGISTER_SCONTROL, sctrl.as_uint64); |
| |
| if (vmbus_irq != -1) |
| disable_percpu_irq(vmbus_irq); |
| } |
| |
| #define HV_MAX_TRIES 3 |
| /* |
| * Scan the event flags page of 'this' CPU looking for any bit that is set. If we find one |
| * bit set, then wait for a few milliseconds. Repeat these steps for a maximum of 3 times. |
| * Return 'true', if there is still any set bit after this operation; 'false', otherwise. |
| * |
| * If a bit is set, that means there is a pending channel interrupt. The expectation is |
| * that the normal interrupt handling mechanism will find and process the channel interrupt |
| * "very soon", and in the process clear the bit. |
| */ |
| static bool hv_synic_event_pending(void) |
| { |
| struct hv_per_cpu_context *hv_cpu = this_cpu_ptr(hv_context.cpu_context); |
| union hv_synic_event_flags *event = |
| (union hv_synic_event_flags *)hv_cpu->synic_event_page + VMBUS_MESSAGE_SINT; |
| unsigned long *recv_int_page = event->flags; /* assumes VMBus version >= VERSION_WIN8 */ |
| bool pending; |
| u32 relid; |
| int tries = 0; |
| |
| retry: |
| pending = false; |
| for_each_set_bit(relid, recv_int_page, HV_EVENT_FLAGS_COUNT) { |
| /* Special case - VMBus channel protocol messages */ |
| if (relid == 0) |
| continue; |
| pending = true; |
| break; |
| } |
| if (pending && tries++ < HV_MAX_TRIES) { |
| usleep_range(10000, 20000); |
| goto retry; |
| } |
| return pending; |
| } |
| |
| int hv_synic_cleanup(unsigned int cpu) |
| { |
| struct vmbus_channel *channel, *sc; |
| bool channel_found = false; |
| |
| if (vmbus_connection.conn_state != CONNECTED) |
| goto always_cleanup; |
| |
| /* |
| * Hyper-V does not provide a way to change the connect CPU once |
| * it is set; we must prevent the connect CPU from going offline |
| * while the VM is running normally. But in the panic or kexec() |
| * path where the vmbus is already disconnected, the CPU must be |
| * allowed to shut down. |
| */ |
| if (cpu == VMBUS_CONNECT_CPU) |
| return -EBUSY; |
| |
| /* |
| * Search for channels which are bound to the CPU we're about to |
| * cleanup. In case we find one and vmbus is still connected, we |
| * fail; this will effectively prevent CPU offlining. |
| * |
| * TODO: Re-bind the channels to different CPUs. |
| */ |
| mutex_lock(&vmbus_connection.channel_mutex); |
| list_for_each_entry(channel, &vmbus_connection.chn_list, listentry) { |
| if (channel->target_cpu == cpu) { |
| channel_found = true; |
| break; |
| } |
| list_for_each_entry(sc, &channel->sc_list, sc_list) { |
| if (sc->target_cpu == cpu) { |
| channel_found = true; |
| break; |
| } |
| } |
| if (channel_found) |
| break; |
| } |
| mutex_unlock(&vmbus_connection.channel_mutex); |
| |
| if (channel_found) |
| return -EBUSY; |
| |
| /* |
| * channel_found == false means that any channels that were previously |
| * assigned to the CPU have been reassigned elsewhere with a call of |
| * vmbus_send_modifychannel(). Scan the event flags page looking for |
| * bits that are set and waiting with a timeout for vmbus_chan_sched() |
| * to process such bits. If bits are still set after this operation |
| * and VMBus is connected, fail the CPU offlining operation. |
| */ |
| if (vmbus_proto_version >= VERSION_WIN10_V4_1 && hv_synic_event_pending()) |
| return -EBUSY; |
| |
| always_cleanup: |
| hv_stimer_legacy_cleanup(cpu); |
| |
| hv_synic_disable_regs(cpu); |
| |
| return 0; |
| } |