| /* |
| * OMAP2xxx APLL clock control functions |
| * |
| * Copyright (C) 2005-2008 Texas Instruments, Inc. |
| * Copyright (C) 2004-2010 Nokia Corporation |
| * |
| * Contacts: |
| * Richard Woodruff <r-woodruff2@ti.com> |
| * Paul Walmsley |
| * |
| * Based on earlier work by Tuukka Tikkanen, Tony Lindgren, |
| * Gordon McNutt and RidgeRun, Inc. |
| * |
| * This program is free software; you can redistribute it and/or modify |
| * it under the terms of the GNU General Public License version 2 as |
| * published by the Free Software Foundation. |
| */ |
| #undef DEBUG |
| |
| #include <linux/kernel.h> |
| #include <linux/clk.h> |
| #include <linux/io.h> |
| |
| #include <plat/prcm.h> |
| |
| #include "clock.h" |
| #include "clock2xxx.h" |
| #include "cm2xxx_3xxx.h" |
| #include "cm-regbits-24xx.h" |
| |
| /* CM_CLKEN_PLL.EN_{54,96}M_PLL options (24XX) */ |
| #define EN_APLL_STOPPED 0 |
| #define EN_APLL_LOCKED 3 |
| |
| /* CM_CLKSEL1_PLL.APLLS_CLKIN options (24XX) */ |
| #define APLLS_CLKIN_19_2MHZ 0 |
| #define APLLS_CLKIN_13MHZ 2 |
| #define APLLS_CLKIN_12MHZ 3 |
| |
| void __iomem *cm_idlest_pll; |
| |
| /* Private functions */ |
| |
| /* Enable an APLL if off */ |
| static int omap2_clk_apll_enable(struct clk *clk, u32 status_mask) |
| { |
| u32 cval, apll_mask; |
| |
| apll_mask = EN_APLL_LOCKED << clk->enable_bit; |
| |
| cval = omap2_cm_read_mod_reg(PLL_MOD, CM_CLKEN); |
| |
| if ((cval & apll_mask) == apll_mask) |
| return 0; /* apll already enabled */ |
| |
| cval &= ~apll_mask; |
| cval |= apll_mask; |
| omap2_cm_write_mod_reg(cval, PLL_MOD, CM_CLKEN); |
| |
| omap2_cm_wait_idlest(cm_idlest_pll, status_mask, |
| OMAP24XX_CM_IDLEST_VAL, __clk_get_name(clk)); |
| |
| /* |
| * REVISIT: Should we return an error code if omap2_wait_clock_ready() |
| * fails? |
| */ |
| return 0; |
| } |
| |
| static int omap2_clk_apll96_enable(struct clk *clk) |
| { |
| return omap2_clk_apll_enable(clk, OMAP24XX_ST_96M_APLL_MASK); |
| } |
| |
| static int omap2_clk_apll54_enable(struct clk *clk) |
| { |
| return omap2_clk_apll_enable(clk, OMAP24XX_ST_54M_APLL_MASK); |
| } |
| |
| static void _apll96_allow_idle(struct clk *clk) |
| { |
| omap2xxx_cm_set_apll96_auto_low_power_stop(); |
| } |
| |
| static void _apll96_deny_idle(struct clk *clk) |
| { |
| omap2xxx_cm_set_apll96_disable_autoidle(); |
| } |
| |
| static void _apll54_allow_idle(struct clk *clk) |
| { |
| omap2xxx_cm_set_apll54_auto_low_power_stop(); |
| } |
| |
| static void _apll54_deny_idle(struct clk *clk) |
| { |
| omap2xxx_cm_set_apll54_disable_autoidle(); |
| } |
| |
| /* Stop APLL */ |
| static void omap2_clk_apll_disable(struct clk *clk) |
| { |
| u32 cval; |
| |
| cval = omap2_cm_read_mod_reg(PLL_MOD, CM_CLKEN); |
| cval &= ~(EN_APLL_LOCKED << clk->enable_bit); |
| omap2_cm_write_mod_reg(cval, PLL_MOD, CM_CLKEN); |
| } |
| |
| /* Public data */ |
| |
| const struct clkops clkops_apll96 = { |
| .enable = omap2_clk_apll96_enable, |
| .disable = omap2_clk_apll_disable, |
| .allow_idle = _apll96_allow_idle, |
| .deny_idle = _apll96_deny_idle, |
| }; |
| |
| const struct clkops clkops_apll54 = { |
| .enable = omap2_clk_apll54_enable, |
| .disable = omap2_clk_apll_disable, |
| .allow_idle = _apll54_allow_idle, |
| .deny_idle = _apll54_deny_idle, |
| }; |
| |
| /* Public functions */ |
| |
| u32 omap2xxx_get_apll_clkin(void) |
| { |
| u32 aplls, srate = 0; |
| |
| aplls = omap2_cm_read_mod_reg(PLL_MOD, CM_CLKSEL1); |
| aplls &= OMAP24XX_APLLS_CLKIN_MASK; |
| aplls >>= OMAP24XX_APLLS_CLKIN_SHIFT; |
| |
| if (aplls == APLLS_CLKIN_19_2MHZ) |
| srate = 19200000; |
| else if (aplls == APLLS_CLKIN_13MHZ) |
| srate = 13000000; |
| else if (aplls == APLLS_CLKIN_12MHZ) |
| srate = 12000000; |
| |
| return srate; |
| } |
| |