| /* bnx2x_reg.h: Broadcom Everest network driver. |
| * |
| * Copyright (c) 2007-2012 Broadcom Corporation |
| * |
| * This program is free software; you can redistribute it and/or modify |
| * it under the terms of the GNU General Public License as published by |
| * the Free Software Foundation. |
| * |
| * The registers description starts with the register Access type followed |
| * by size in bits. For example [RW 32]. The access types are: |
| * R - Read only |
| * RC - Clear on read |
| * RW - Read/Write |
| * ST - Statistics register (clear on read) |
| * W - Write only |
| * WB - Wide bus register - the size is over 32 bits and it should be |
| * read/write in consecutive 32 bits accesses |
| * WR - Write Clear (write 1 to clear the bit) |
| * |
| */ |
| #ifndef BNX2X_REG_H |
| #define BNX2X_REG_H |
| |
| #define ATC_ATC_INT_STS_REG_ADDRESS_ERROR (0x1<<0) |
| #define ATC_ATC_INT_STS_REG_ATC_GPA_MULTIPLE_HITS (0x1<<2) |
| #define ATC_ATC_INT_STS_REG_ATC_IREQ_LESS_THAN_STU (0x1<<5) |
| #define ATC_ATC_INT_STS_REG_ATC_RCPL_TO_EMPTY_CNT (0x1<<3) |
| #define ATC_ATC_INT_STS_REG_ATC_TCPL_ERROR (0x1<<4) |
| #define ATC_ATC_INT_STS_REG_ATC_TCPL_TO_NOT_PEND (0x1<<1) |
| /* [RW 1] Initiate the ATC array - reset all the valid bits */ |
| #define ATC_REG_ATC_INIT_ARRAY 0x1100b8 |
| /* [R 1] ATC initalization done */ |
| #define ATC_REG_ATC_INIT_DONE 0x1100bc |
| /* [RC 6] Interrupt register #0 read clear */ |
| #define ATC_REG_ATC_INT_STS_CLR 0x1101c0 |
| /* [RW 5] Parity mask register #0 read/write */ |
| #define ATC_REG_ATC_PRTY_MASK 0x1101d8 |
| /* [RC 5] Parity register #0 read clear */ |
| #define ATC_REG_ATC_PRTY_STS_CLR 0x1101d0 |
| /* [RW 19] Interrupt mask register #0 read/write */ |
| #define BRB1_REG_BRB1_INT_MASK 0x60128 |
| /* [R 19] Interrupt register #0 read */ |
| #define BRB1_REG_BRB1_INT_STS 0x6011c |
| /* [RW 4] Parity mask register #0 read/write */ |
| #define BRB1_REG_BRB1_PRTY_MASK 0x60138 |
| /* [R 4] Parity register #0 read */ |
| #define BRB1_REG_BRB1_PRTY_STS 0x6012c |
| /* [RC 4] Parity register #0 read clear */ |
| #define BRB1_REG_BRB1_PRTY_STS_CLR 0x60130 |
| /* [RW 10] At address BRB1_IND_FREE_LIST_PRS_CRDT initialize free head. At |
| * address BRB1_IND_FREE_LIST_PRS_CRDT+1 initialize free tail. At address |
| * BRB1_IND_FREE_LIST_PRS_CRDT+2 initialize parser initial credit. Warning - |
| * following reset the first rbc access to this reg must be write; there can |
| * be no more rbc writes after the first one; there can be any number of rbc |
| * read following the first write; rbc access not following these rules will |
| * result in hang condition. */ |
| #define BRB1_REG_FREE_LIST_PRS_CRDT 0x60200 |
| /* [RW 10] The number of free blocks below which the full signal to class 0 |
| * is asserted */ |
| #define BRB1_REG_FULL_0_XOFF_THRESHOLD_0 0x601d0 |
| #define BRB1_REG_FULL_0_XOFF_THRESHOLD_1 0x60230 |
| /* [RW 11] The number of free blocks above which the full signal to class 0 |
| * is de-asserted */ |
| #define BRB1_REG_FULL_0_XON_THRESHOLD_0 0x601d4 |
| #define BRB1_REG_FULL_0_XON_THRESHOLD_1 0x60234 |
| /* [RW 11] The number of free blocks below which the full signal to class 1 |
| * is asserted */ |
| #define BRB1_REG_FULL_1_XOFF_THRESHOLD_0 0x601d8 |
| #define BRB1_REG_FULL_1_XOFF_THRESHOLD_1 0x60238 |
| /* [RW 11] The number of free blocks above which the full signal to class 1 |
| * is de-asserted */ |
| #define BRB1_REG_FULL_1_XON_THRESHOLD_0 0x601dc |
| #define BRB1_REG_FULL_1_XON_THRESHOLD_1 0x6023c |
| /* [RW 11] The number of free blocks below which the full signal to the LB |
| * port is asserted */ |
| #define BRB1_REG_FULL_LB_XOFF_THRESHOLD 0x601e0 |
| /* [RW 10] The number of free blocks above which the full signal to the LB |
| * port is de-asserted */ |
| #define BRB1_REG_FULL_LB_XON_THRESHOLD 0x601e4 |
| /* [RW 10] The number of free blocks above which the High_llfc signal to |
| interface #n is de-asserted. */ |
| #define BRB1_REG_HIGH_LLFC_HIGH_THRESHOLD_0 0x6014c |
| /* [RW 10] The number of free blocks below which the High_llfc signal to |
| interface #n is asserted. */ |
| #define BRB1_REG_HIGH_LLFC_LOW_THRESHOLD_0 0x6013c |
| /* [RW 11] The number of blocks guarantied for the LB port */ |
| #define BRB1_REG_LB_GUARANTIED 0x601ec |
| /* [RW 11] The hysteresis on the guarantied buffer space for the Lb port |
| * before signaling XON. */ |
| #define BRB1_REG_LB_GUARANTIED_HYST 0x60264 |
| /* [RW 24] LL RAM data. */ |
| #define BRB1_REG_LL_RAM 0x61000 |
| /* [RW 10] The number of free blocks above which the Low_llfc signal to |
| interface #n is de-asserted. */ |
| #define BRB1_REG_LOW_LLFC_HIGH_THRESHOLD_0 0x6016c |
| /* [RW 10] The number of free blocks below which the Low_llfc signal to |
| interface #n is asserted. */ |
| #define BRB1_REG_LOW_LLFC_LOW_THRESHOLD_0 0x6015c |
| /* [RW 11] The number of blocks guarantied for class 0 in MAC 0. The |
| * register is applicable only when per_class_guaranty_mode is set. */ |
| #define BRB1_REG_MAC_0_CLASS_0_GUARANTIED 0x60244 |
| /* [RW 11] The hysteresis on the guarantied buffer space for class 0 in MAC |
| * 1 before signaling XON. The register is applicable only when |
| * per_class_guaranty_mode is set. */ |
| #define BRB1_REG_MAC_0_CLASS_0_GUARANTIED_HYST 0x60254 |
| /* [RW 11] The number of blocks guarantied for class 1 in MAC 0. The |
| * register is applicable only when per_class_guaranty_mode is set. */ |
| #define BRB1_REG_MAC_0_CLASS_1_GUARANTIED 0x60248 |
| /* [RW 11] The hysteresis on the guarantied buffer space for class 1in MAC 0 |
| * before signaling XON. The register is applicable only when |
| * per_class_guaranty_mode is set. */ |
| #define BRB1_REG_MAC_0_CLASS_1_GUARANTIED_HYST 0x60258 |
| /* [RW 11] The number of blocks guarantied for class 0in MAC1.The register |
| * is applicable only when per_class_guaranty_mode is set. */ |
| #define BRB1_REG_MAC_1_CLASS_0_GUARANTIED 0x6024c |
| /* [RW 11] The hysteresis on the guarantied buffer space for class 0 in MAC |
| * 1 before signaling XON. The register is applicable only when |
| * per_class_guaranty_mode is set. */ |
| #define BRB1_REG_MAC_1_CLASS_0_GUARANTIED_HYST 0x6025c |
| /* [RW 11] The number of blocks guarantied for class 1 in MAC 1. The |
| * register is applicable only when per_class_guaranty_mode is set. */ |
| #define BRB1_REG_MAC_1_CLASS_1_GUARANTIED 0x60250 |
| /* [RW 11] The hysteresis on the guarantied buffer space for class 1 in MAC |
| * 1 before signaling XON. The register is applicable only when |
| * per_class_guaranty_mode is set. */ |
| #define BRB1_REG_MAC_1_CLASS_1_GUARANTIED_HYST 0x60260 |
| /* [RW 11] The number of blocks guarantied for the MAC port. The register is |
| * applicable only when per_class_guaranty_mode is reset. */ |
| #define BRB1_REG_MAC_GUARANTIED_0 0x601e8 |
| #define BRB1_REG_MAC_GUARANTIED_1 0x60240 |
| /* [R 24] The number of full blocks. */ |
| #define BRB1_REG_NUM_OF_FULL_BLOCKS 0x60090 |
| /* [ST 32] The number of cycles that the write_full signal towards MAC #0 |
| was asserted. */ |
| #define BRB1_REG_NUM_OF_FULL_CYCLES_0 0x600c8 |
| #define BRB1_REG_NUM_OF_FULL_CYCLES_1 0x600cc |
| #define BRB1_REG_NUM_OF_FULL_CYCLES_4 0x600d8 |
| /* [ST 32] The number of cycles that the pause signal towards MAC #0 was |
| asserted. */ |
| #define BRB1_REG_NUM_OF_PAUSE_CYCLES_0 0x600b8 |
| #define BRB1_REG_NUM_OF_PAUSE_CYCLES_1 0x600bc |
| /* [RW 10] The number of free blocks below which the pause signal to class 0 |
| * is asserted */ |
| #define BRB1_REG_PAUSE_0_XOFF_THRESHOLD_0 0x601c0 |
| #define BRB1_REG_PAUSE_0_XOFF_THRESHOLD_1 0x60220 |
| /* [RW 11] The number of free blocks above which the pause signal to class 0 |
| * is de-asserted */ |
| #define BRB1_REG_PAUSE_0_XON_THRESHOLD_0 0x601c4 |
| #define BRB1_REG_PAUSE_0_XON_THRESHOLD_1 0x60224 |
| /* [RW 11] The number of free blocks below which the pause signal to class 1 |
| * is asserted */ |
| #define BRB1_REG_PAUSE_1_XOFF_THRESHOLD_0 0x601c8 |
| #define BRB1_REG_PAUSE_1_XOFF_THRESHOLD_1 0x60228 |
| /* [RW 11] The number of free blocks above which the pause signal to class 1 |
| * is de-asserted */ |
| #define BRB1_REG_PAUSE_1_XON_THRESHOLD_0 0x601cc |
| #define BRB1_REG_PAUSE_1_XON_THRESHOLD_1 0x6022c |
| /* [RW 10] Write client 0: De-assert pause threshold. Not Functional */ |
| #define BRB1_REG_PAUSE_HIGH_THRESHOLD_0 0x60078 |
| #define BRB1_REG_PAUSE_HIGH_THRESHOLD_1 0x6007c |
| /* [RW 10] Write client 0: Assert pause threshold. */ |
| #define BRB1_REG_PAUSE_LOW_THRESHOLD_0 0x60068 |
| /* [RW 1] Indicates if to use per-class guaranty mode (new mode) or per-MAC |
| * guaranty mode (backwards-compatible mode). 0=per-MAC guaranty mode (BC |
| * mode). 1=per-class guaranty mode (new mode). */ |
| #define BRB1_REG_PER_CLASS_GUARANTY_MODE 0x60268 |
| /* [R 24] The number of full blocks occpied by port. */ |
| #define BRB1_REG_PORT_NUM_OCC_BLOCKS_0 0x60094 |
| /* [RW 1] Reset the design by software. */ |
| #define BRB1_REG_SOFT_RESET 0x600dc |
| /* [R 5] Used to read the value of the XX protection CAM occupancy counter. */ |
| #define CCM_REG_CAM_OCCUP 0xd0188 |
| /* [RW 1] CM - CFC Interface enable. If 0 - the valid input is disregarded; |
| acknowledge output is deasserted; all other signals are treated as usual; |
| if 1 - normal activity. */ |
| #define CCM_REG_CCM_CFC_IFEN 0xd003c |
| /* [RW 1] CM - QM Interface enable. If 0 - the acknowledge input is |
| disregarded; valid is deasserted; all other signals are treated as usual; |
| if 1 - normal activity. */ |
| #define CCM_REG_CCM_CQM_IFEN 0xd000c |
| /* [RW 1] If set the Q index; received from the QM is inserted to event ID. |
| Otherwise 0 is inserted. */ |
| #define CCM_REG_CCM_CQM_USE_Q 0xd00c0 |
| /* [RW 11] Interrupt mask register #0 read/write */ |
| #define CCM_REG_CCM_INT_MASK 0xd01e4 |
| /* [R 11] Interrupt register #0 read */ |
| #define CCM_REG_CCM_INT_STS 0xd01d8 |
| /* [RW 27] Parity mask register #0 read/write */ |
| #define CCM_REG_CCM_PRTY_MASK 0xd01f4 |
| /* [R 27] Parity register #0 read */ |
| #define CCM_REG_CCM_PRTY_STS 0xd01e8 |
| /* [RC 27] Parity register #0 read clear */ |
| #define CCM_REG_CCM_PRTY_STS_CLR 0xd01ec |
| /* [RW 3] The size of AG context region 0 in REG-pairs. Designates the MS |
| REG-pair number (e.g. if region 0 is 6 REG-pairs; the value should be 5). |
| Is used to determine the number of the AG context REG-pairs written back; |
| when the input message Reg1WbFlg isn't set. */ |
| #define CCM_REG_CCM_REG0_SZ 0xd00c4 |
| /* [RW 1] CM - STORM 0 Interface enable. If 0 - the acknowledge input is |
| disregarded; valid is deasserted; all other signals are treated as usual; |
| if 1 - normal activity. */ |
| #define CCM_REG_CCM_STORM0_IFEN 0xd0004 |
| /* [RW 1] CM - STORM 1 Interface enable. If 0 - the acknowledge input is |
| disregarded; valid is deasserted; all other signals are treated as usual; |
| if 1 - normal activity. */ |
| #define CCM_REG_CCM_STORM1_IFEN 0xd0008 |
| /* [RW 1] CDU AG read Interface enable. If 0 - the request input is |
| disregarded; valid output is deasserted; all other signals are treated as |
| usual; if 1 - normal activity. */ |
| #define CCM_REG_CDU_AG_RD_IFEN 0xd0030 |
| /* [RW 1] CDU AG write Interface enable. If 0 - the request and valid input |
| are disregarded; all other signals are treated as usual; if 1 - normal |
| activity. */ |
| #define CCM_REG_CDU_AG_WR_IFEN 0xd002c |
| /* [RW 1] CDU STORM read Interface enable. If 0 - the request input is |
| disregarded; valid output is deasserted; all other signals are treated as |
| usual; if 1 - normal activity. */ |
| #define CCM_REG_CDU_SM_RD_IFEN 0xd0038 |
| /* [RW 1] CDU STORM write Interface enable. If 0 - the request and valid |
| input is disregarded; all other signals are treated as usual; if 1 - |
| normal activity. */ |
| #define CCM_REG_CDU_SM_WR_IFEN 0xd0034 |
| /* [RW 4] CFC output initial credit. Max credit available - 15.Write writes |
| the initial credit value; read returns the current value of the credit |
| counter. Must be initialized to 1 at start-up. */ |
| #define CCM_REG_CFC_INIT_CRD 0xd0204 |
| /* [RW 2] Auxiliary counter flag Q number 1. */ |
| #define CCM_REG_CNT_AUX1_Q 0xd00c8 |
| /* [RW 2] Auxiliary counter flag Q number 2. */ |
| #define CCM_REG_CNT_AUX2_Q 0xd00cc |
| /* [RW 28] The CM header value for QM request (primary). */ |
| #define CCM_REG_CQM_CCM_HDR_P 0xd008c |
| /* [RW 28] The CM header value for QM request (secondary). */ |
| #define CCM_REG_CQM_CCM_HDR_S 0xd0090 |
| /* [RW 1] QM - CM Interface enable. If 0 - the valid input is disregarded; |
| acknowledge output is deasserted; all other signals are treated as usual; |
| if 1 - normal activity. */ |
| #define CCM_REG_CQM_CCM_IFEN 0xd0014 |
| /* [RW 6] QM output initial credit. Max credit available - 32. Write writes |
| the initial credit value; read returns the current value of the credit |
| counter. Must be initialized to 32 at start-up. */ |
| #define CCM_REG_CQM_INIT_CRD 0xd020c |
| /* [RW 3] The weight of the QM (primary) input in the WRR mechanism. 0 |
| stands for weight 8 (the most prioritised); 1 stands for weight 1(least |
| prioritised); 2 stands for weight 2; tc. */ |
| #define CCM_REG_CQM_P_WEIGHT 0xd00b8 |
| /* [RW 3] The weight of the QM (secondary) input in the WRR mechanism. 0 |
| stands for weight 8 (the most prioritised); 1 stands for weight 1(least |
| prioritised); 2 stands for weight 2; tc. */ |
| #define CCM_REG_CQM_S_WEIGHT 0xd00bc |
| /* [RW 1] Input SDM Interface enable. If 0 - the valid input is disregarded; |
| acknowledge output is deasserted; all other signals are treated as usual; |
| if 1 - normal activity. */ |
| #define CCM_REG_CSDM_IFEN 0xd0018 |
| /* [RC 1] Set when the message length mismatch (relative to last indication) |
| at the SDM interface is detected. */ |
| #define CCM_REG_CSDM_LENGTH_MIS 0xd0170 |
| /* [RW 3] The weight of the SDM input in the WRR mechanism. 0 stands for |
| weight 8 (the most prioritised); 1 stands for weight 1(least |
| prioritised); 2 stands for weight 2; tc. */ |
| #define CCM_REG_CSDM_WEIGHT 0xd00b4 |
| /* [RW 28] The CM header for QM formatting in case of an error in the QM |
| inputs. */ |
| #define CCM_REG_ERR_CCM_HDR 0xd0094 |
| /* [RW 8] The Event ID in case the input message ErrorFlg is set. */ |
| #define CCM_REG_ERR_EVNT_ID 0xd0098 |
| /* [RW 8] FIC0 output initial credit. Max credit available - 255. Write |
| writes the initial credit value; read returns the current value of the |
| credit counter. Must be initialized to 64 at start-up. */ |
| #define CCM_REG_FIC0_INIT_CRD 0xd0210 |
| /* [RW 8] FIC1 output initial credit. Max credit available - 255.Write |
| writes the initial credit value; read returns the current value of the |
| credit counter. Must be initialized to 64 at start-up. */ |
| #define CCM_REG_FIC1_INIT_CRD 0xd0214 |
| /* [RW 1] Arbitration between Input Arbiter groups: 0 - fair Round-Robin; 1 |
| - strict priority defined by ~ccm_registers_gr_ag_pr.gr_ag_pr; |
| ~ccm_registers_gr_ld0_pr.gr_ld0_pr and |
| ~ccm_registers_gr_ld1_pr.gr_ld1_pr. Groups are according to channels and |
| outputs to STORM: aggregation; load FIC0; load FIC1 and store. */ |
| #define CCM_REG_GR_ARB_TYPE 0xd015c |
| /* [RW 2] Load (FIC0) channel group priority. The lowest priority is 0; the |
| highest priority is 3. It is supposed; that the Store channel priority is |
| the compliment to 4 of the rest priorities - Aggregation channel; Load |
| (FIC0) channel and Load (FIC1). */ |
| #define CCM_REG_GR_LD0_PR 0xd0164 |
| /* [RW 2] Load (FIC1) channel group priority. The lowest priority is 0; the |
| highest priority is 3. It is supposed; that the Store channel priority is |
| the compliment to 4 of the rest priorities - Aggregation channel; Load |
| (FIC0) channel and Load (FIC1). */ |
| #define CCM_REG_GR_LD1_PR 0xd0168 |
| /* [RW 2] General flags index. */ |
| #define CCM_REG_INV_DONE_Q 0xd0108 |
| /* [RW 4] The number of double REG-pairs(128 bits); loaded from the STORM |
| context and sent to STORM; for a specific connection type. The double |
| REG-pairs are used in order to align to STORM context row size of 128 |
| bits. The offset of these data in the STORM context is always 0. Index |
| _(0..15) stands for the connection type (one of 16). */ |
| #define CCM_REG_N_SM_CTX_LD_0 0xd004c |
| #define CCM_REG_N_SM_CTX_LD_1 0xd0050 |
| #define CCM_REG_N_SM_CTX_LD_2 0xd0054 |
| #define CCM_REG_N_SM_CTX_LD_3 0xd0058 |
| #define CCM_REG_N_SM_CTX_LD_4 0xd005c |
| /* [RW 1] Input pbf Interface enable. If 0 - the valid input is disregarded; |
| acknowledge output is deasserted; all other signals are treated as usual; |
| if 1 - normal activity. */ |
| #define CCM_REG_PBF_IFEN 0xd0028 |
| /* [RC 1] Set when the message length mismatch (relative to last indication) |
| at the pbf interface is detected. */ |
| #define CCM_REG_PBF_LENGTH_MIS 0xd0180 |
| /* [RW 3] The weight of the input pbf in the WRR mechanism. 0 stands for |
| weight 8 (the most prioritised); 1 stands for weight 1(least |
| prioritised); 2 stands for weight 2; tc. */ |
| #define CCM_REG_PBF_WEIGHT 0xd00ac |
| #define CCM_REG_PHYS_QNUM1_0 0xd0134 |
| #define CCM_REG_PHYS_QNUM1_1 0xd0138 |
| #define CCM_REG_PHYS_QNUM2_0 0xd013c |
| #define CCM_REG_PHYS_QNUM2_1 0xd0140 |
| #define CCM_REG_PHYS_QNUM3_0 0xd0144 |
| #define CCM_REG_PHYS_QNUM3_1 0xd0148 |
| #define CCM_REG_QOS_PHYS_QNUM0_0 0xd0114 |
| #define CCM_REG_QOS_PHYS_QNUM0_1 0xd0118 |
| #define CCM_REG_QOS_PHYS_QNUM1_0 0xd011c |
| #define CCM_REG_QOS_PHYS_QNUM1_1 0xd0120 |
| #define CCM_REG_QOS_PHYS_QNUM2_0 0xd0124 |
| #define CCM_REG_QOS_PHYS_QNUM2_1 0xd0128 |
| #define CCM_REG_QOS_PHYS_QNUM3_0 0xd012c |
| #define CCM_REG_QOS_PHYS_QNUM3_1 0xd0130 |
| /* [RW 1] STORM - CM Interface enable. If 0 - the valid input is |
| disregarded; acknowledge output is deasserted; all other signals are |
| treated as usual; if 1 - normal activity. */ |
| #define CCM_REG_STORM_CCM_IFEN 0xd0010 |
| /* [RC 1] Set when the message length mismatch (relative to last indication) |
| at the STORM interface is detected. */ |
| #define CCM_REG_STORM_LENGTH_MIS 0xd016c |
| /* [RW 3] The weight of the STORM input in the WRR (Weighted Round robin) |
| mechanism. 0 stands for weight 8 (the most prioritised); 1 stands for |
| weight 1(least prioritised); 2 stands for weight 2 (more prioritised); |
| tc. */ |
| #define CCM_REG_STORM_WEIGHT 0xd009c |
| /* [RW 1] Input tsem Interface enable. If 0 - the valid input is |
| disregarded; acknowledge output is deasserted; all other signals are |
| treated as usual; if 1 - normal activity. */ |
| #define CCM_REG_TSEM_IFEN 0xd001c |
| /* [RC 1] Set when the message length mismatch (relative to last indication) |
| at the tsem interface is detected. */ |
| #define CCM_REG_TSEM_LENGTH_MIS 0xd0174 |
| /* [RW 3] The weight of the input tsem in the WRR mechanism. 0 stands for |
| weight 8 (the most prioritised); 1 stands for weight 1(least |
| prioritised); 2 stands for weight 2; tc. */ |
| #define CCM_REG_TSEM_WEIGHT 0xd00a0 |
| /* [RW 1] Input usem Interface enable. If 0 - the valid input is |
| disregarded; acknowledge output is deasserted; all other signals are |
| treated as usual; if 1 - normal activity. */ |
| #define CCM_REG_USEM_IFEN 0xd0024 |
| /* [RC 1] Set when message length mismatch (relative to last indication) at |
| the usem interface is detected. */ |
| #define CCM_REG_USEM_LENGTH_MIS 0xd017c |
| /* [RW 3] The weight of the input usem in the WRR mechanism. 0 stands for |
| weight 8 (the most prioritised); 1 stands for weight 1(least |
| prioritised); 2 stands for weight 2; tc. */ |
| #define CCM_REG_USEM_WEIGHT 0xd00a8 |
| /* [RW 1] Input xsem Interface enable. If 0 - the valid input is |
| disregarded; acknowledge output is deasserted; all other signals are |
| treated as usual; if 1 - normal activity. */ |
| #define CCM_REG_XSEM_IFEN 0xd0020 |
| /* [RC 1] Set when the message length mismatch (relative to last indication) |
| at the xsem interface is detected. */ |
| #define CCM_REG_XSEM_LENGTH_MIS 0xd0178 |
| /* [RW 3] The weight of the input xsem in the WRR mechanism. 0 stands for |
| weight 8 (the most prioritised); 1 stands for weight 1(least |
| prioritised); 2 stands for weight 2; tc. */ |
| #define CCM_REG_XSEM_WEIGHT 0xd00a4 |
| /* [RW 19] Indirect access to the descriptor table of the XX protection |
| mechanism. The fields are: [5:0] - message length; [12:6] - message |
| pointer; 18:13] - next pointer. */ |
| #define CCM_REG_XX_DESCR_TABLE 0xd0300 |
| #define CCM_REG_XX_DESCR_TABLE_SIZE 24 |
| /* [R 7] Used to read the value of XX protection Free counter. */ |
| #define CCM_REG_XX_FREE 0xd0184 |
| /* [RW 6] Initial value for the credit counter; responsible for fulfilling |
| of the Input Stage XX protection buffer by the XX protection pending |
| messages. Max credit available - 127. Write writes the initial credit |
| value; read returns the current value of the credit counter. Must be |
| initialized to maximum XX protected message size - 2 at start-up. */ |
| #define CCM_REG_XX_INIT_CRD 0xd0220 |
| /* [RW 7] The maximum number of pending messages; which may be stored in XX |
| protection. At read the ~ccm_registers_xx_free.xx_free counter is read. |
| At write comprises the start value of the ~ccm_registers_xx_free.xx_free |
| counter. */ |
| #define CCM_REG_XX_MSG_NUM 0xd0224 |
| /* [RW 8] The Event ID; sent to the STORM in case of XX overflow. */ |
| #define CCM_REG_XX_OVFL_EVNT_ID 0xd0044 |
| /* [RW 18] Indirect access to the XX table of the XX protection mechanism. |
| The fields are: [5:0] - tail pointer; 11:6] - Link List size; 17:12] - |
| header pointer. */ |
| #define CCM_REG_XX_TABLE 0xd0280 |
| #define CDU_REG_CDU_CHK_MASK0 0x101000 |
| #define CDU_REG_CDU_CHK_MASK1 0x101004 |
| #define CDU_REG_CDU_CONTROL0 0x101008 |
| #define CDU_REG_CDU_DEBUG 0x101010 |
| #define CDU_REG_CDU_GLOBAL_PARAMS 0x101020 |
| /* [RW 7] Interrupt mask register #0 read/write */ |
| #define CDU_REG_CDU_INT_MASK 0x10103c |
| /* [R 7] Interrupt register #0 read */ |
| #define CDU_REG_CDU_INT_STS 0x101030 |
| /* [RW 5] Parity mask register #0 read/write */ |
| #define CDU_REG_CDU_PRTY_MASK 0x10104c |
| /* [R 5] Parity register #0 read */ |
| #define CDU_REG_CDU_PRTY_STS 0x101040 |
| /* [RC 5] Parity register #0 read clear */ |
| #define CDU_REG_CDU_PRTY_STS_CLR 0x101044 |
| /* [RC 32] logging of error data in case of a CDU load error: |
| {expected_cid[15:0]; xpected_type[2:0]; xpected_region[2:0]; ctive_error; |
| ype_error; ctual_active; ctual_compressed_context}; */ |
| #define CDU_REG_ERROR_DATA 0x101014 |
| /* [WB 216] L1TT ram access. each entry has the following format : |
| {mrege_regions[7:0]; ffset12[5:0]...offset0[5:0]; |
| ength12[5:0]...length0[5:0]; d12[3:0]...id0[3:0]} */ |
| #define CDU_REG_L1TT 0x101800 |
| /* [WB 24] MATT ram access. each entry has the following |
| format:{RegionLength[11:0]; egionOffset[11:0]} */ |
| #define CDU_REG_MATT 0x101100 |
| /* [RW 1] when this bit is set the CDU operates in e1hmf mode */ |
| #define CDU_REG_MF_MODE 0x101050 |
| /* [R 1] indication the initializing the activity counter by the hardware |
| was done. */ |
| #define CFC_REG_AC_INIT_DONE 0x104078 |
| /* [RW 13] activity counter ram access */ |
| #define CFC_REG_ACTIVITY_COUNTER 0x104400 |
| #define CFC_REG_ACTIVITY_COUNTER_SIZE 256 |
| /* [R 1] indication the initializing the cams by the hardware was done. */ |
| #define CFC_REG_CAM_INIT_DONE 0x10407c |
| /* [RW 2] Interrupt mask register #0 read/write */ |
| #define CFC_REG_CFC_INT_MASK 0x104108 |
| /* [R 2] Interrupt register #0 read */ |
| #define CFC_REG_CFC_INT_STS 0x1040fc |
| /* [RC 2] Interrupt register #0 read clear */ |
| #define CFC_REG_CFC_INT_STS_CLR 0x104100 |
| /* [RW 4] Parity mask register #0 read/write */ |
| #define CFC_REG_CFC_PRTY_MASK 0x104118 |
| /* [R 4] Parity register #0 read */ |
| #define CFC_REG_CFC_PRTY_STS 0x10410c |
| /* [RC 4] Parity register #0 read clear */ |
| #define CFC_REG_CFC_PRTY_STS_CLR 0x104110 |
| /* [RW 21] CID cam access (21:1 - Data; alid - 0) */ |
| #define CFC_REG_CID_CAM 0x104800 |
| #define CFC_REG_CONTROL0 0x104028 |
| #define CFC_REG_DEBUG0 0x104050 |
| /* [RW 14] indicates per error (in #cfc_registers_cfc_error_vector.cfc_error |
| vector) whether the cfc should be disabled upon it */ |
| #define CFC_REG_DISABLE_ON_ERROR 0x104044 |
| /* [RC 14] CFC error vector. when the CFC detects an internal error it will |
| set one of these bits. the bit description can be found in CFC |
| specifications */ |
| #define CFC_REG_ERROR_VECTOR 0x10403c |
| /* [WB 93] LCID info ram access */ |
| #define CFC_REG_INFO_RAM 0x105000 |
| #define CFC_REG_INFO_RAM_SIZE 1024 |
| #define CFC_REG_INIT_REG 0x10404c |
| #define CFC_REG_INTERFACES 0x104058 |
| /* [RW 24] {weight_load_client7[2:0] to weight_load_client0[2:0]}. this |
| field allows changing the priorities of the weighted-round-robin arbiter |
| which selects which CFC load client should be served next */ |
| #define CFC_REG_LCREQ_WEIGHTS 0x104084 |
| /* [RW 16] Link List ram access; data = {prev_lcid; ext_lcid} */ |
| #define CFC_REG_LINK_LIST 0x104c00 |
| #define CFC_REG_LINK_LIST_SIZE 256 |
| /* [R 1] indication the initializing the link list by the hardware was done. */ |
| #define CFC_REG_LL_INIT_DONE 0x104074 |
| /* [R 9] Number of allocated LCIDs which are at empty state */ |
| #define CFC_REG_NUM_LCIDS_ALLOC 0x104020 |
| /* [R 9] Number of Arriving LCIDs in Link List Block */ |
| #define CFC_REG_NUM_LCIDS_ARRIVING 0x104004 |
| #define CFC_REG_NUM_LCIDS_INSIDE_PF 0x104120 |
| /* [R 9] Number of Leaving LCIDs in Link List Block */ |
| #define CFC_REG_NUM_LCIDS_LEAVING 0x104018 |
| #define CFC_REG_WEAK_ENABLE_PF 0x104124 |
| /* [RW 8] The event id for aggregated interrupt 0 */ |
| #define CSDM_REG_AGG_INT_EVENT_0 0xc2038 |
| #define CSDM_REG_AGG_INT_EVENT_10 0xc2060 |
| #define CSDM_REG_AGG_INT_EVENT_11 0xc2064 |
| #define CSDM_REG_AGG_INT_EVENT_12 0xc2068 |
| #define CSDM_REG_AGG_INT_EVENT_13 0xc206c |
| #define CSDM_REG_AGG_INT_EVENT_14 0xc2070 |
| #define CSDM_REG_AGG_INT_EVENT_15 0xc2074 |
| #define CSDM_REG_AGG_INT_EVENT_16 0xc2078 |
| #define CSDM_REG_AGG_INT_EVENT_2 0xc2040 |
| #define CSDM_REG_AGG_INT_EVENT_3 0xc2044 |
| #define CSDM_REG_AGG_INT_EVENT_4 0xc2048 |
| #define CSDM_REG_AGG_INT_EVENT_5 0xc204c |
| #define CSDM_REG_AGG_INT_EVENT_6 0xc2050 |
| #define CSDM_REG_AGG_INT_EVENT_7 0xc2054 |
| #define CSDM_REG_AGG_INT_EVENT_8 0xc2058 |
| #define CSDM_REG_AGG_INT_EVENT_9 0xc205c |
| /* [RW 1] For each aggregated interrupt index whether the mode is normal (0) |
| or auto-mask-mode (1) */ |
| #define CSDM_REG_AGG_INT_MODE_10 0xc21e0 |
| #define CSDM_REG_AGG_INT_MODE_11 0xc21e4 |
| #define CSDM_REG_AGG_INT_MODE_12 0xc21e8 |
| #define CSDM_REG_AGG_INT_MODE_13 0xc21ec |
| #define CSDM_REG_AGG_INT_MODE_14 0xc21f0 |
| #define CSDM_REG_AGG_INT_MODE_15 0xc21f4 |
| #define CSDM_REG_AGG_INT_MODE_16 0xc21f8 |
| #define CSDM_REG_AGG_INT_MODE_6 0xc21d0 |
| #define CSDM_REG_AGG_INT_MODE_7 0xc21d4 |
| #define CSDM_REG_AGG_INT_MODE_8 0xc21d8 |
| #define CSDM_REG_AGG_INT_MODE_9 0xc21dc |
| /* [RW 13] The start address in the internal RAM for the cfc_rsp lcid */ |
| #define CSDM_REG_CFC_RSP_START_ADDR 0xc2008 |
| /* [RW 16] The maximum value of the completion counter #0 */ |
| #define CSDM_REG_CMP_COUNTER_MAX0 0xc201c |
| /* [RW 16] The maximum value of the completion counter #1 */ |
| #define CSDM_REG_CMP_COUNTER_MAX1 0xc2020 |
| /* [RW 16] The maximum value of the completion counter #2 */ |
| #define CSDM_REG_CMP_COUNTER_MAX2 0xc2024 |
| /* [RW 16] The maximum value of the completion counter #3 */ |
| #define CSDM_REG_CMP_COUNTER_MAX3 0xc2028 |
| /* [RW 13] The start address in the internal RAM for the completion |
| counters. */ |
| #define CSDM_REG_CMP_COUNTER_START_ADDR 0xc200c |
| /* [RW 32] Interrupt mask register #0 read/write */ |
| #define CSDM_REG_CSDM_INT_MASK_0 0xc229c |
| #define CSDM_REG_CSDM_INT_MASK_1 0xc22ac |
| /* [R 32] Interrupt register #0 read */ |
| #define CSDM_REG_CSDM_INT_STS_0 0xc2290 |
| #define CSDM_REG_CSDM_INT_STS_1 0xc22a0 |
| /* [RW 11] Parity mask register #0 read/write */ |
| #define CSDM_REG_CSDM_PRTY_MASK 0xc22bc |
| /* [R 11] Parity register #0 read */ |
| #define CSDM_REG_CSDM_PRTY_STS 0xc22b0 |
| /* [RC 11] Parity register #0 read clear */ |
| #define CSDM_REG_CSDM_PRTY_STS_CLR 0xc22b4 |
| #define CSDM_REG_ENABLE_IN1 0xc2238 |
| #define CSDM_REG_ENABLE_IN2 0xc223c |
| #define CSDM_REG_ENABLE_OUT1 0xc2240 |
| #define CSDM_REG_ENABLE_OUT2 0xc2244 |
| /* [RW 4] The initial number of messages that can be sent to the pxp control |
| interface without receiving any ACK. */ |
| #define CSDM_REG_INIT_CREDIT_PXP_CTRL 0xc24bc |
| /* [ST 32] The number of ACK after placement messages received */ |
| #define CSDM_REG_NUM_OF_ACK_AFTER_PLACE 0xc227c |
| /* [ST 32] The number of packet end messages received from the parser */ |
| #define CSDM_REG_NUM_OF_PKT_END_MSG 0xc2274 |
| /* [ST 32] The number of requests received from the pxp async if */ |
| #define CSDM_REG_NUM_OF_PXP_ASYNC_REQ 0xc2278 |
| /* [ST 32] The number of commands received in queue 0 */ |
| #define CSDM_REG_NUM_OF_Q0_CMD 0xc2248 |
| /* [ST 32] The number of commands received in queue 10 */ |
| #define CSDM_REG_NUM_OF_Q10_CMD 0xc226c |
| /* [ST 32] The number of commands received in queue 11 */ |
| #define CSDM_REG_NUM_OF_Q11_CMD 0xc2270 |
| /* [ST 32] The number of commands received in queue 1 */ |
| #define CSDM_REG_NUM_OF_Q1_CMD 0xc224c |
| /* [ST 32] The number of commands received in queue 3 */ |
| #define CSDM_REG_NUM_OF_Q3_CMD 0xc2250 |
| /* [ST 32] The number of commands received in queue 4 */ |
| #define CSDM_REG_NUM_OF_Q4_CMD 0xc2254 |
| /* [ST 32] The number of commands received in queue 5 */ |
| #define CSDM_REG_NUM_OF_Q5_CMD 0xc2258 |
| /* [ST 32] The number of commands received in queue 6 */ |
| #define CSDM_REG_NUM_OF_Q6_CMD 0xc225c |
| /* [ST 32] The number of commands received in queue 7 */ |
| #define CSDM_REG_NUM_OF_Q7_CMD 0xc2260 |
| /* [ST 32] The number of commands received in queue 8 */ |
| #define CSDM_REG_NUM_OF_Q8_CMD 0xc2264 |
| /* [ST 32] The number of commands received in queue 9 */ |
| #define CSDM_REG_NUM_OF_Q9_CMD 0xc2268 |
| /* [RW 13] The start address in the internal RAM for queue counters */ |
| #define CSDM_REG_Q_COUNTER_START_ADDR 0xc2010 |
| /* [R 1] pxp_ctrl rd_data fifo empty in sdm_dma_rsp block */ |
| #define CSDM_REG_RSP_PXP_CTRL_RDATA_EMPTY 0xc2548 |
| /* [R 1] parser fifo empty in sdm_sync block */ |
| #define CSDM_REG_SYNC_PARSER_EMPTY 0xc2550 |
| /* [R 1] parser serial fifo empty in sdm_sync block */ |
| #define CSDM_REG_SYNC_SYNC_EMPTY 0xc2558 |
| /* [RW 32] Tick for timer counter. Applicable only when |
| ~csdm_registers_timer_tick_enable.timer_tick_enable =1 */ |
| #define CSDM_REG_TIMER_TICK 0xc2000 |
| /* [RW 5] The number of time_slots in the arbitration cycle */ |
| #define CSEM_REG_ARB_CYCLE_SIZE 0x200034 |
| /* [RW 3] The source that is associated with arbitration element 0. Source |
| decoding is: 0- foc0; 1-fic1; 2-sleeping thread with priority 0; 3- |
| sleeping thread with priority 1; 4- sleeping thread with priority 2 */ |
| #define CSEM_REG_ARB_ELEMENT0 0x200020 |
| /* [RW 3] The source that is associated with arbitration element 1. Source |
| decoding is: 0- foc0; 1-fic1; 2-sleeping thread with priority 0; 3- |
| sleeping thread with priority 1; 4- sleeping thread with priority 2. |
| Could not be equal to register ~csem_registers_arb_element0.arb_element0 */ |
| #define CSEM_REG_ARB_ELEMENT1 0x200024 |
| /* [RW 3] The source that is associated with arbitration element 2. Source |
| decoding is: 0- foc0; 1-fic1; 2-sleeping thread with priority 0; 3- |
| sleeping thread with priority 1; 4- sleeping thread with priority 2. |
| Could not be equal to register ~csem_registers_arb_element0.arb_element0 |
| and ~csem_registers_arb_element1.arb_element1 */ |
| #define CSEM_REG_ARB_ELEMENT2 0x200028 |
| /* [RW 3] The source that is associated with arbitration element 3. Source |
| decoding is: 0- foc0; 1-fic1; 2-sleeping thread with priority 0; 3- |
| sleeping thread with priority 1; 4- sleeping thread with priority 2.Could |
| not be equal to register ~csem_registers_arb_element0.arb_element0 and |
| ~csem_registers_arb_element1.arb_element1 and |
| ~csem_registers_arb_element2.arb_element2 */ |
| #define CSEM_REG_ARB_ELEMENT3 0x20002c |
| /* [RW 3] The source that is associated with arbitration element 4. Source |
| decoding is: 0- foc0; 1-fic1; 2-sleeping thread with priority 0; 3- |
| sleeping thread with priority 1; 4- sleeping thread with priority 2. |
| Could not be equal to register ~csem_registers_arb_element0.arb_element0 |
| and ~csem_registers_arb_element1.arb_element1 and |
| ~csem_registers_arb_element2.arb_element2 and |
| ~csem_registers_arb_element3.arb_element3 */ |
| #define CSEM_REG_ARB_ELEMENT4 0x200030 |
| /* [RW 32] Interrupt mask register #0 read/write */ |
| #define CSEM_REG_CSEM_INT_MASK_0 0x200110 |
| #define CSEM_REG_CSEM_INT_MASK_1 0x200120 |
| /* [R 32] Interrupt register #0 read */ |
| #define CSEM_REG_CSEM_INT_STS_0 0x200104 |
| #define CSEM_REG_CSEM_INT_STS_1 0x200114 |
| /* [RW 32] Parity mask register #0 read/write */ |
| #define CSEM_REG_CSEM_PRTY_MASK_0 0x200130 |
| #define CSEM_REG_CSEM_PRTY_MASK_1 0x200140 |
| /* [R 32] Parity register #0 read */ |
| #define CSEM_REG_CSEM_PRTY_STS_0 0x200124 |
| #define CSEM_REG_CSEM_PRTY_STS_1 0x200134 |
| /* [RC 32] Parity register #0 read clear */ |
| #define CSEM_REG_CSEM_PRTY_STS_CLR_0 0x200128 |
| #define CSEM_REG_CSEM_PRTY_STS_CLR_1 0x200138 |
| #define CSEM_REG_ENABLE_IN 0x2000a4 |
| #define CSEM_REG_ENABLE_OUT 0x2000a8 |
| /* [RW 32] This address space contains all registers and memories that are |
| placed in SEM_FAST block. The SEM_FAST registers are described in |
| appendix B. In order to access the sem_fast registers the base address |
| ~fast_memory.fast_memory should be added to eachsem_fast register offset. */ |
| #define CSEM_REG_FAST_MEMORY 0x220000 |
| /* [RW 1] Disables input messages from FIC0 May be updated during run_time |
| by the microcode */ |
| #define CSEM_REG_FIC0_DISABLE 0x200224 |
| /* [RW 1] Disables input messages from FIC1 May be updated during run_time |
| by the microcode */ |
| #define CSEM_REG_FIC1_DISABLE 0x200234 |
| /* [RW 15] Interrupt table Read and write access to it is not possible in |
| the middle of the work */ |
| #define CSEM_REG_INT_TABLE 0x200400 |
| /* [ST 24] Statistics register. The number of messages that entered through |
| FIC0 */ |
| #define CSEM_REG_MSG_NUM_FIC0 0x200000 |
| /* [ST 24] Statistics register. The number of messages that entered through |
| FIC1 */ |
| #define CSEM_REG_MSG_NUM_FIC1 0x200004 |
| /* [ST 24] Statistics register. The number of messages that were sent to |
| FOC0 */ |
| #define CSEM_REG_MSG_NUM_FOC0 0x200008 |
| /* [ST 24] Statistics register. The number of messages that were sent to |
| FOC1 */ |
| #define CSEM_REG_MSG_NUM_FOC1 0x20000c |
| /* [ST 24] Statistics register. The number of messages that were sent to |
| FOC2 */ |
| #define CSEM_REG_MSG_NUM_FOC2 0x200010 |
| /* [ST 24] Statistics register. The number of messages that were sent to |
| FOC3 */ |
| #define CSEM_REG_MSG_NUM_FOC3 0x200014 |
| /* [RW 1] Disables input messages from the passive buffer May be updated |
| during run_time by the microcode */ |
| #define CSEM_REG_PAS_DISABLE 0x20024c |
| /* [WB 128] Debug only. Passive buffer memory */ |
| #define CSEM_REG_PASSIVE_BUFFER 0x202000 |
| /* [WB 46] pram memory. B45 is parity; b[44:0] - data. */ |
| #define CSEM_REG_PRAM 0x240000 |
| /* [R 16] Valid sleeping threads indication have bit per thread */ |
| #define CSEM_REG_SLEEP_THREADS_VALID 0x20026c |
| /* [R 1] EXT_STORE FIFO is empty in sem_slow_ls_ext */ |
| #define CSEM_REG_SLOW_EXT_STORE_EMPTY 0x2002a0 |
| /* [RW 16] List of free threads . There is a bit per thread. */ |
| #define CSEM_REG_THREADS_LIST 0x2002e4 |
| /* [RW 3] The arbitration scheme of time_slot 0 */ |
| #define CSEM_REG_TS_0_AS 0x200038 |
| /* [RW 3] The arbitration scheme of time_slot 10 */ |
| #define CSEM_REG_TS_10_AS 0x200060 |
| /* [RW 3] The arbitration scheme of time_slot 11 */ |
| #define CSEM_REG_TS_11_AS 0x200064 |
| /* [RW 3] The arbitration scheme of time_slot 12 */ |
| #define CSEM_REG_TS_12_AS 0x200068 |
| /* [RW 3] The arbitration scheme of time_slot 13 */ |
| #define CSEM_REG_TS_13_AS 0x20006c |
| /* [RW 3] The arbitration scheme of time_slot 14 */ |
| #define CSEM_REG_TS_14_AS 0x200070 |
| /* [RW 3] The arbitration scheme of time_slot 15 */ |
| #define CSEM_REG_TS_15_AS 0x200074 |
| /* [RW 3] The arbitration scheme of time_slot 16 */ |
| #define CSEM_REG_TS_16_AS 0x200078 |
| /* [RW 3] The arbitration scheme of time_slot 17 */ |
| #define CSEM_REG_TS_17_AS 0x20007c |
| /* [RW 3] The arbitration scheme of time_slot 18 */ |
| #define CSEM_REG_TS_18_AS 0x200080 |
| /* [RW 3] The arbitration scheme of time_slot 1 */ |
| #define CSEM_REG_TS_1_AS 0x20003c |
| /* [RW 3] The arbitration scheme of time_slot 2 */ |
| #define CSEM_REG_TS_2_AS 0x200040 |
| /* [RW 3] The arbitration scheme of time_slot 3 */ |
| #define CSEM_REG_TS_3_AS 0x200044 |
| /* [RW 3] The arbitration scheme of time_slot 4 */ |
| #define CSEM_REG_TS_4_AS 0x200048 |
| /* [RW 3] The arbitration scheme of time_slot 5 */ |
| #define CSEM_REG_TS_5_AS 0x20004c |
| /* [RW 3] The arbitration scheme of time_slot 6 */ |
| #define CSEM_REG_TS_6_AS 0x200050 |
| /* [RW 3] The arbitration scheme of time_slot 7 */ |
| #define CSEM_REG_TS_7_AS 0x200054 |
| /* [RW 3] The arbitration scheme of time_slot 8 */ |
| #define CSEM_REG_TS_8_AS 0x200058 |
| /* [RW 3] The arbitration scheme of time_slot 9 */ |
| #define CSEM_REG_TS_9_AS 0x20005c |
| /* [W 7] VF or PF ID for reset error bit. Values 0-63 reset error bit for 64 |
| * VF; values 64-67 reset error for 4 PF; values 68-127 are not valid. */ |
| #define CSEM_REG_VFPF_ERR_NUM 0x200380 |
| /* [RW 1] Parity mask register #0 read/write */ |
| #define DBG_REG_DBG_PRTY_MASK 0xc0a8 |
| /* [R 1] Parity register #0 read */ |
| #define DBG_REG_DBG_PRTY_STS 0xc09c |
| /* [RC 1] Parity register #0 read clear */ |
| #define DBG_REG_DBG_PRTY_STS_CLR 0xc0a0 |
| /* [RW 1] When set the DMAE will process the commands as in E1.5. 1.The |
| * function that is used is always SRC-PCI; 2.VF_Valid = 0; 3.VFID=0; |
| * 4.Completion function=0; 5.Error handling=0 */ |
| #define DMAE_REG_BACKWARD_COMP_EN 0x10207c |
| /* [RW 32] Commands memory. The address to command X; row Y is to calculated |
| as 14*X+Y. */ |
| #define DMAE_REG_CMD_MEM 0x102400 |
| #define DMAE_REG_CMD_MEM_SIZE 224 |
| /* [RW 1] If 0 - the CRC-16c initial value is all zeroes; if 1 - the CRC-16c |
| initial value is all ones. */ |
| #define DMAE_REG_CRC16C_INIT 0x10201c |
| /* [RW 1] If 0 - the CRC-16 T10 initial value is all zeroes; if 1 - the |
| CRC-16 T10 initial value is all ones. */ |
| #define DMAE_REG_CRC16T10_INIT 0x102020 |
| /* [RW 2] Interrupt mask register #0 read/write */ |
| #define DMAE_REG_DMAE_INT_MASK 0x102054 |
| /* [RW 4] Parity mask register #0 read/write */ |
| #define DMAE_REG_DMAE_PRTY_MASK 0x102064 |
| /* [R 4] Parity register #0 read */ |
| #define DMAE_REG_DMAE_PRTY_STS 0x102058 |
| /* [RC 4] Parity register #0 read clear */ |
| #define DMAE_REG_DMAE_PRTY_STS_CLR 0x10205c |
| /* [RW 1] Command 0 go. */ |
| #define DMAE_REG_GO_C0 0x102080 |
| /* [RW 1] Command 1 go. */ |
| #define DMAE_REG_GO_C1 0x102084 |
| /* [RW 1] Command 10 go. */ |
| #define DMAE_REG_GO_C10 0x102088 |
| /* [RW 1] Command 11 go. */ |
| #define DMAE_REG_GO_C11 0x10208c |
| /* [RW 1] Command 12 go. */ |
| #define DMAE_REG_GO_C12 0x102090 |
| /* [RW 1] Command 13 go. */ |
| #define DMAE_REG_GO_C13 0x102094 |
| /* [RW 1] Command 14 go. */ |
| #define DMAE_REG_GO_C14 0x102098 |
| /* [RW 1] Command 15 go. */ |
| #define DMAE_REG_GO_C15 0x10209c |
| /* [RW 1] Command 2 go. */ |
| #define DMAE_REG_GO_C2 0x1020a0 |
| /* [RW 1] Command 3 go. */ |
| #define DMAE_REG_GO_C3 0x1020a4 |
| /* [RW 1] Command 4 go. */ |
| #define DMAE_REG_GO_C4 0x1020a8 |
| /* [RW 1] Command 5 go. */ |
| #define DMAE_REG_GO_C5 0x1020ac |
| /* [RW 1] Command 6 go. */ |
| #define DMAE_REG_GO_C6 0x1020b0 |
| /* [RW 1] Command 7 go. */ |
| #define DMAE_REG_GO_C7 0x1020b4 |
| /* [RW 1] Command 8 go. */ |
| #define DMAE_REG_GO_C8 0x1020b8 |
| /* [RW 1] Command 9 go. */ |
| #define DMAE_REG_GO_C9 0x1020bc |
| /* [RW 1] DMAE GRC Interface (Target; aster) enable. If 0 - the acknowledge |
| input is disregarded; valid is deasserted; all other signals are treated |
| as usual; if 1 - normal activity. */ |
| #define DMAE_REG_GRC_IFEN 0x102008 |
| /* [RW 1] DMAE PCI Interface (Request; ead; rite) enable. If 0 - the |
| acknowledge input is disregarded; valid is deasserted; full is asserted; |
| all other signals are treated as usual; if 1 - normal activity. */ |
| #define DMAE_REG_PCI_IFEN 0x102004 |
| /* [RW 4] DMAE- PCI Request Interface initial credit. Write writes the |
| initial value to the credit counter; related to the address. Read returns |
| the current value of the counter. */ |
| #define DMAE_REG_PXP_REQ_INIT_CRD 0x1020c0 |
| /* [RW 8] Aggregation command. */ |
| #define DORQ_REG_AGG_CMD0 0x170060 |
| /* [RW 8] Aggregation command. */ |
| #define DORQ_REG_AGG_CMD1 0x170064 |
| /* [RW 8] Aggregation command. */ |
| #define DORQ_REG_AGG_CMD2 0x170068 |
| /* [RW 8] Aggregation command. */ |
| #define DORQ_REG_AGG_CMD3 0x17006c |
| /* [RW 28] UCM Header. */ |
| #define DORQ_REG_CMHEAD_RX 0x170050 |
| /* [RW 32] Doorbell address for RBC doorbells (function 0). */ |
| #define DORQ_REG_DB_ADDR0 0x17008c |
| /* [RW 5] Interrupt mask register #0 read/write */ |
| #define DORQ_REG_DORQ_INT_MASK 0x170180 |
| /* [R 5] Interrupt register #0 read */ |
| #define DORQ_REG_DORQ_INT_STS 0x170174 |
| /* [RC 5] Interrupt register #0 read clear */ |
| #define DORQ_REG_DORQ_INT_STS_CLR 0x170178 |
| /* [RW 2] Parity mask register #0 read/write */ |
| #define DORQ_REG_DORQ_PRTY_MASK 0x170190 |
| /* [R 2] Parity register #0 read */ |
| #define DORQ_REG_DORQ_PRTY_STS 0x170184 |
| /* [RC 2] Parity register #0 read clear */ |
| #define DORQ_REG_DORQ_PRTY_STS_CLR 0x170188 |
| /* [RW 8] The address to write the DPM CID to STORM. */ |
| #define DORQ_REG_DPM_CID_ADDR 0x170044 |
| /* [RW 5] The DPM mode CID extraction offset. */ |
| #define DORQ_REG_DPM_CID_OFST 0x170030 |
| /* [RW 12] The threshold of the DQ FIFO to send the almost full interrupt. */ |
| #define DORQ_REG_DQ_FIFO_AFULL_TH 0x17007c |
| /* [RW 12] The threshold of the DQ FIFO to send the full interrupt. */ |
| #define DORQ_REG_DQ_FIFO_FULL_TH 0x170078 |
| /* [R 13] Current value of the DQ FIFO fill level according to following |
| pointer. The range is 0 - 256 FIFO rows; where each row stands for the |
| doorbell. */ |
| #define DORQ_REG_DQ_FILL_LVLF 0x1700a4 |
| /* [R 1] DQ FIFO full status. Is set; when FIFO filling level is more or |
| equal to full threshold; reset on full clear. */ |
| #define DORQ_REG_DQ_FULL_ST 0x1700c0 |
| /* [RW 28] The value sent to CM header in the case of CFC load error. */ |
| #define DORQ_REG_ERR_CMHEAD 0x170058 |
| #define DORQ_REG_IF_EN 0x170004 |
| #define DORQ_REG_MODE_ACT 0x170008 |
| /* [RW 5] The normal mode CID extraction offset. */ |
| #define DORQ_REG_NORM_CID_OFST 0x17002c |
| /* [RW 28] TCM Header when only TCP context is loaded. */ |
| #define DORQ_REG_NORM_CMHEAD_TX 0x17004c |
| /* [RW 3] The number of simultaneous outstanding requests to Context Fetch |
| Interface. */ |
| #define DORQ_REG_OUTST_REQ 0x17003c |
| #define DORQ_REG_PF_USAGE_CNT 0x1701d0 |
| #define DORQ_REG_REGN 0x170038 |
| /* [R 4] Current value of response A counter credit. Initial credit is |
| configured through write to ~dorq_registers_rsp_init_crd.rsp_init_crd |
| register. */ |
| #define DORQ_REG_RSPA_CRD_CNT 0x1700ac |
| /* [R 4] Current value of response B counter credit. Initial credit is |
| configured through write to ~dorq_registers_rsp_init_crd.rsp_init_crd |
| register. */ |
| #define DORQ_REG_RSPB_CRD_CNT 0x1700b0 |
| /* [RW 4] The initial credit at the Doorbell Response Interface. The write |
| writes the same initial credit to the rspa_crd_cnt and rspb_crd_cnt. The |
| read reads this written value. */ |
| #define DORQ_REG_RSP_INIT_CRD 0x170048 |
| /* [RW 4] Initial activity counter value on the load request; when the |
| shortcut is done. */ |
| #define DORQ_REG_SHRT_ACT_CNT 0x170070 |
| /* [RW 28] TCM Header when both ULP and TCP context is loaded. */ |
| #define DORQ_REG_SHRT_CMHEAD 0x170054 |
| #define HC_CONFIG_0_REG_ATTN_BIT_EN_0 (0x1<<4) |
| #define HC_CONFIG_0_REG_BLOCK_DISABLE_0 (0x1<<0) |
| #define HC_CONFIG_0_REG_INT_LINE_EN_0 (0x1<<3) |
| #define HC_CONFIG_0_REG_MSI_ATTN_EN_0 (0x1<<7) |
| #define HC_CONFIG_0_REG_MSI_MSIX_INT_EN_0 (0x1<<2) |
| #define HC_CONFIG_0_REG_SINGLE_ISR_EN_0 (0x1<<1) |
| #define HC_CONFIG_1_REG_BLOCK_DISABLE_1 (0x1<<0) |
| #define HC_REG_AGG_INT_0 0x108050 |
| #define HC_REG_AGG_INT_1 0x108054 |
| #define HC_REG_ATTN_BIT 0x108120 |
| #define HC_REG_ATTN_IDX 0x108100 |
| #define HC_REG_ATTN_MSG0_ADDR_L 0x108018 |
| #define HC_REG_ATTN_MSG1_ADDR_L 0x108020 |
| #define HC_REG_ATTN_NUM_P0 0x108038 |
| #define HC_REG_ATTN_NUM_P1 0x10803c |
| #define HC_REG_COMMAND_REG 0x108180 |
| #define HC_REG_CONFIG_0 0x108000 |
| #define HC_REG_CONFIG_1 0x108004 |
| #define HC_REG_FUNC_NUM_P0 0x1080ac |
| #define HC_REG_FUNC_NUM_P1 0x1080b0 |
| /* [RW 3] Parity mask register #0 read/write */ |
| #define HC_REG_HC_PRTY_MASK 0x1080a0 |
| /* [R 3] Parity register #0 read */ |
| #define HC_REG_HC_PRTY_STS 0x108094 |
| /* [RC 3] Parity register #0 read clear */ |
| #define HC_REG_HC_PRTY_STS_CLR 0x108098 |
| #define HC_REG_INT_MASK 0x108108 |
| #define HC_REG_LEADING_EDGE_0 0x108040 |
| #define HC_REG_LEADING_EDGE_1 0x108048 |
| #define HC_REG_MAIN_MEMORY 0x108800 |
| #define HC_REG_MAIN_MEMORY_SIZE 152 |
| #define HC_REG_P0_PROD_CONS 0x108200 |
| #define HC_REG_P1_PROD_CONS 0x108400 |
| #define HC_REG_PBA_COMMAND 0x108140 |
| #define HC_REG_PCI_CONFIG_0 0x108010 |
| #define HC_REG_PCI_CONFIG_1 0x108014 |
| #define HC_REG_STATISTIC_COUNTERS 0x109000 |
| #define HC_REG_TRAILING_EDGE_0 0x108044 |
| #define HC_REG_TRAILING_EDGE_1 0x10804c |
| #define HC_REG_UC_RAM_ADDR_0 0x108028 |
| #define HC_REG_UC_RAM_ADDR_1 0x108030 |
| #define HC_REG_USTORM_ADDR_FOR_COALESCE 0x108068 |
| #define HC_REG_VQID_0 0x108008 |
| #define HC_REG_VQID_1 0x10800c |
| #define IGU_BLOCK_CONFIGURATION_REG_BACKWARD_COMP_EN (0x1<<1) |
| #define IGU_BLOCK_CONFIGURATION_REG_BLOCK_ENABLE (0x1<<0) |
| #define IGU_REG_ATTENTION_ACK_BITS 0x130108 |
| /* [R 4] Debug: attn_fsm */ |
| #define IGU_REG_ATTN_FSM 0x130054 |
| #define IGU_REG_ATTN_MSG_ADDR_H 0x13011c |
| #define IGU_REG_ATTN_MSG_ADDR_L 0x130120 |
| /* [R 4] Debug: [3] - attention write done message is pending (0-no pending; |
| * 1-pending). [2:0] = PFID. Pending means attention message was sent; but |
| * write done didn't receive. */ |
| #define IGU_REG_ATTN_WRITE_DONE_PENDING 0x130030 |
| #define IGU_REG_BLOCK_CONFIGURATION 0x130000 |
| #define IGU_REG_COMMAND_REG_32LSB_DATA 0x130124 |
| #define IGU_REG_COMMAND_REG_CTRL 0x13012c |
| /* [WB_R 32] Cleanup bit status per SB. 1 = cleanup is set. 0 = cleanup bit |
| * is clear. The bits in this registers are set and clear via the producer |
| * command. Data valid only in addresses 0-4. all the rest are zero. */ |
| #define IGU_REG_CSTORM_TYPE_0_SB_CLEANUP 0x130200 |
| /* [R 5] Debug: ctrl_fsm */ |
| #define IGU_REG_CTRL_FSM 0x130064 |
| /* [R 1] data available for error memory. If this bit is clear do not red |
| * from error_handling_memory. */ |
| #define IGU_REG_ERROR_HANDLING_DATA_VALID 0x130130 |
| /* [RW 11] Parity mask register #0 read/write */ |
| #define IGU_REG_IGU_PRTY_MASK 0x1300a8 |
| /* [R 11] Parity register #0 read */ |
| #define IGU_REG_IGU_PRTY_STS 0x13009c |
| /* [RC 11] Parity register #0 read clear */ |
| #define IGU_REG_IGU_PRTY_STS_CLR 0x1300a0 |
| /* [R 4] Debug: int_handle_fsm */ |
| #define IGU_REG_INT_HANDLE_FSM 0x130050 |
| #define IGU_REG_LEADING_EDGE_LATCH 0x130134 |
| /* [RW 14] mapping CAM; relevant for E2 operating mode only. [0] - valid. |
| * [6:1] - vector number; [13:7] - FID (if VF - [13] = 0; [12:7] = VF |
| * number; if PF - [13] = 1; [12:10] = 0; [9:7] = PF number); */ |
| #define IGU_REG_MAPPING_MEMORY 0x131000 |
| #define IGU_REG_MAPPING_MEMORY_SIZE 136 |
| #define IGU_REG_PBA_STATUS_LSB 0x130138 |
| #define IGU_REG_PBA_STATUS_MSB 0x13013c |
| #define IGU_REG_PCI_PF_MSI_EN 0x130140 |
| #define IGU_REG_PCI_PF_MSIX_EN 0x130144 |
| #define IGU_REG_PCI_PF_MSIX_FUNC_MASK 0x130148 |
| /* [WB_R 32] Each bit represent the pending bits status for that SB. 0 = no |
| * pending; 1 = pending. Pendings means interrupt was asserted; and write |
| * done was not received. Data valid only in addresses 0-4. all the rest are |
| * zero. */ |
| #define IGU_REG_PENDING_BITS_STATUS 0x130300 |
| #define IGU_REG_PF_CONFIGURATION 0x130154 |
| /* [RW 20] producers only. E2 mode: address 0-135 match to the mapping |
| * memory; 136 - PF0 default prod; 137 PF1 default prod; 138 - PF2 default |
| * prod; 139 PF3 default prod; 140 - PF0 - ATTN prod; 141 - PF1 - ATTN prod; |
| * 142 - PF2 - ATTN prod; 143 - PF3 - ATTN prod; 144-147 reserved. E1.5 mode |
| * - In backward compatible mode; for non default SB; each even line in the |
| * memory holds the U producer and each odd line hold the C producer. The |
| * first 128 producer are for NDSB (PF0 - 0-31; PF1 - 32-63 and so on). The |
| * last 20 producers are for the DSB for each PF. each PF has five segments |
| * (the order inside each segment is PF0; PF1; PF2; PF3) - 128-131 U prods; |
| * 132-135 C prods; 136-139 X prods; 140-143 T prods; 144-147 ATTN prods; */ |
| #define IGU_REG_PROD_CONS_MEMORY 0x132000 |
| /* [R 3] Debug: pxp_arb_fsm */ |
| #define IGU_REG_PXP_ARB_FSM 0x130068 |
| /* [RW 6] Write one for each bit will reset the appropriate memory. When the |
| * memory reset finished the appropriate bit will be clear. Bit 0 - mapping |
| * memory; Bit 1 - SB memory; Bit 2 - SB interrupt and mask register; Bit 3 |
| * - MSIX memory; Bit 4 - PBA memory; Bit 5 - statistics; */ |
| #define IGU_REG_RESET_MEMORIES 0x130158 |
| /* [R 4] Debug: sb_ctrl_fsm */ |
| #define IGU_REG_SB_CTRL_FSM 0x13004c |
| #define IGU_REG_SB_INT_BEFORE_MASK_LSB 0x13015c |
| #define IGU_REG_SB_INT_BEFORE_MASK_MSB 0x130160 |
| #define IGU_REG_SB_MASK_LSB 0x130164 |
| #define IGU_REG_SB_MASK_MSB 0x130168 |
| /* [RW 16] Number of command that were dropped without causing an interrupt |
| * due to: read access for WO BAR address; or write access for RO BAR |
| * address or any access for reserved address or PCI function error is set |
| * and address is not MSIX; PBA or cleanup */ |
| #define IGU_REG_SILENT_DROP 0x13016c |
| /* [RW 10] Number of MSI/MSIX/ATTN messages sent for the function: 0-63 - |
| * number of MSIX messages per VF; 64-67 - number of MSI/MSIX messages per |
| * PF; 68-71 number of ATTN messages per PF */ |
| #define IGU_REG_STATISTIC_NUM_MESSAGE_SENT 0x130800 |
| /* [RW 32] Number of cycles the timer mask masking the IGU interrupt when a |
| * timer mask command arrives. Value must be bigger than 100. */ |
| #define IGU_REG_TIMER_MASKING_VALUE 0x13003c |
| #define IGU_REG_TRAILING_EDGE_LATCH 0x130104 |
| #define IGU_REG_VF_CONFIGURATION 0x130170 |
| /* [WB_R 32] Each bit represent write done pending bits status for that SB |
| * (MSI/MSIX message was sent and write done was not received yet). 0 = |
| * clear; 1 = set. Data valid only in addresses 0-4. all the rest are zero. */ |
| #define IGU_REG_WRITE_DONE_PENDING 0x130480 |
| #define MCP_A_REG_MCPR_SCRATCH 0x3a0000 |
| #define MCP_REG_MCPR_ACCESS_LOCK 0x8009c |
| #define MCP_REG_MCPR_CPU_PROGRAM_COUNTER 0x8501c |
| #define MCP_REG_MCPR_GP_INPUTS 0x800c0 |
| #define MCP_REG_MCPR_GP_OENABLE 0x800c8 |
| #define MCP_REG_MCPR_GP_OUTPUTS 0x800c4 |
| #define MCP_REG_MCPR_IMC_COMMAND 0x85900 |
| #define MCP_REG_MCPR_IMC_DATAREG0 0x85920 |
| #define MCP_REG_MCPR_IMC_SLAVE_CONTROL 0x85904 |
| #define MCP_REG_MCPR_CPU_PROGRAM_COUNTER 0x8501c |
| #define MCP_REG_MCPR_NVM_ACCESS_ENABLE 0x86424 |
| #define MCP_REG_MCPR_NVM_ADDR 0x8640c |
| #define MCP_REG_MCPR_NVM_CFG4 0x8642c |
| #define MCP_REG_MCPR_NVM_COMMAND 0x86400 |
| #define MCP_REG_MCPR_NVM_READ 0x86410 |
| #define MCP_REG_MCPR_NVM_SW_ARB 0x86420 |
| #define MCP_REG_MCPR_NVM_WRITE 0x86408 |
| #define MCP_REG_MCPR_SCRATCH 0xa0000 |
| #define MISC_AEU_GENERAL_MASK_REG_AEU_NIG_CLOSE_MASK (0x1<<1) |
| #define MISC_AEU_GENERAL_MASK_REG_AEU_PXP_CLOSE_MASK (0x1<<0) |
| /* [R 32] read first 32 bit after inversion of function 0. mapped as |
| follows: [0] NIG attention for function0; [1] NIG attention for |
| function1; [2] GPIO1 mcp; [3] GPIO2 mcp; [4] GPIO3 mcp; [5] GPIO4 mcp; |
| [6] GPIO1 function 1; [7] GPIO2 function 1; [8] GPIO3 function 1; [9] |
| GPIO4 function 1; [10] PCIE glue/PXP VPD event function0; [11] PCIE |
| glue/PXP VPD event function1; [12] PCIE glue/PXP Expansion ROM event0; |
| [13] PCIE glue/PXP Expansion ROM event1; [14] SPIO4; [15] SPIO5; [16] |
| MSI/X indication for mcp; [17] MSI/X indication for function 1; [18] BRB |
| Parity error; [19] BRB Hw interrupt; [20] PRS Parity error; [21] PRS Hw |
| interrupt; [22] SRC Parity error; [23] SRC Hw interrupt; [24] TSDM Parity |
| error; [25] TSDM Hw interrupt; [26] TCM Parity error; [27] TCM Hw |
| interrupt; [28] TSEMI Parity error; [29] TSEMI Hw interrupt; [30] PBF |
| Parity error; [31] PBF Hw interrupt; */ |
| #define MISC_REG_AEU_AFTER_INVERT_1_FUNC_0 0xa42c |
| #define MISC_REG_AEU_AFTER_INVERT_1_FUNC_1 0xa430 |
| /* [R 32] read first 32 bit after inversion of mcp. mapped as follows: [0] |
| NIG attention for function0; [1] NIG attention for function1; [2] GPIO1 |
| mcp; [3] GPIO2 mcp; [4] GPIO3 mcp; [5] GPIO4 mcp; [6] GPIO1 function 1; |
| [7] GPIO2 function 1; [8] GPIO3 function 1; [9] GPIO4 function 1; [10] |
| PCIE glue/PXP VPD event function0; [11] PCIE glue/PXP VPD event |
| function1; [12] PCIE glue/PXP Expansion ROM event0; [13] PCIE glue/PXP |
| Expansion ROM event1; [14] SPIO4; [15] SPIO5; [16] MSI/X indication for |
| mcp; [17] MSI/X indication for function 1; [18] BRB Parity error; [19] |
| BRB Hw interrupt; [20] PRS Parity error; [21] PRS Hw interrupt; [22] SRC |
| Parity error; [23] SRC Hw interrupt; [24] TSDM Parity error; [25] TSDM Hw |
| interrupt; [26] TCM Parity error; [27] TCM Hw interrupt; [28] TSEMI |
| Parity error; [29] TSEMI Hw interrupt; [30] PBF Parity error; [31] PBF Hw |
| interrupt; */ |
| #define MISC_REG_AEU_AFTER_INVERT_1_MCP 0xa434 |
| /* [R 32] read second 32 bit after inversion of function 0. mapped as |
| follows: [0] PBClient Parity error; [1] PBClient Hw interrupt; [2] QM |
| Parity error; [3] QM Hw interrupt; [4] Timers Parity error; [5] Timers Hw |
| interrupt; [6] XSDM Parity error; [7] XSDM Hw interrupt; [8] XCM Parity |
| error; [9] XCM Hw interrupt; [10] XSEMI Parity error; [11] XSEMI Hw |
| interrupt; [12] DoorbellQ Parity error; [13] DoorbellQ Hw interrupt; [14] |
| NIG Parity error; [15] NIG Hw interrupt; [16] Vaux PCI core Parity error; |
| [17] Vaux PCI core Hw interrupt; [18] Debug Parity error; [19] Debug Hw |
| interrupt; [20] USDM Parity error; [21] USDM Hw interrupt; [22] UCM |
| Parity error; [23] UCM Hw interrupt; [24] USEMI Parity error; [25] USEMI |
| Hw interrupt; [26] UPB Parity error; [27] UPB Hw interrupt; [28] CSDM |
| Parity error; [29] CSDM Hw interrupt; [30] CCM Parity error; [31] CCM Hw |
| interrupt; */ |
| #define MISC_REG_AEU_AFTER_INVERT_2_FUNC_0 0xa438 |
| #define MISC_REG_AEU_AFTER_INVERT_2_FUNC_1 0xa43c |
| /* [R 32] read second 32 bit after inversion of mcp. mapped as follows: [0] |
| PBClient Parity error; [1] PBClient Hw interrupt; [2] QM Parity error; |
| [3] QM Hw interrupt; [4] Timers Parity error; [5] Timers Hw interrupt; |
| [6] XSDM Parity error; [7] XSDM Hw interrupt; [8] XCM Parity error; [9] |
| XCM Hw interrupt; [10] XSEMI Parity error; [11] XSEMI Hw interrupt; [12] |
| DoorbellQ Parity error; [13] DoorbellQ Hw interrupt; [14] NIG Parity |
| error; [15] NIG Hw interrupt; [16] Vaux PCI core Parity error; [17] Vaux |
| PCI core Hw interrupt; [18] Debug Parity error; [19] Debug Hw interrupt; |
| [20] USDM Parity error; [21] USDM Hw interrupt; [22] UCM Parity error; |
| [23] UCM Hw interrupt; [24] USEMI Parity error; [25] USEMI Hw interrupt; |
| [26] UPB Parity error; [27] UPB Hw interrupt; [28] CSDM Parity error; |
| [29] CSDM Hw interrupt; [30] CCM Parity error; [31] CCM Hw interrupt; */ |
| #define MISC_REG_AEU_AFTER_INVERT_2_MCP 0xa440 |
| /* [R 32] read third 32 bit after inversion of function 0. mapped as |
| follows: [0] CSEMI Parity error; [1] CSEMI Hw interrupt; [2] PXP Parity |
| error; [3] PXP Hw interrupt; [4] PXPpciClockClient Parity error; [5] |
| PXPpciClockClient Hw interrupt; [6] CFC Parity error; [7] CFC Hw |
| interrupt; [8] CDU Parity error; [9] CDU Hw interrupt; [10] DMAE Parity |
| error; [11] DMAE Hw interrupt; [12] IGU (HC) Parity error; [13] IGU (HC) |
| Hw interrupt; [14] MISC Parity error; [15] MISC Hw interrupt; [16] |
| pxp_misc_mps_attn; [17] Flash event; [18] SMB event; [19] MCP attn0; [20] |
| MCP attn1; [21] SW timers attn_1 func0; [22] SW timers attn_2 func0; [23] |
| SW timers attn_3 func0; [24] SW timers attn_4 func0; [25] PERST; [26] SW |
| timers attn_1 func1; [27] SW timers attn_2 func1; [28] SW timers attn_3 |
| func1; [29] SW timers attn_4 func1; [30] General attn0; [31] General |
| attn1; */ |
| #define MISC_REG_AEU_AFTER_INVERT_3_FUNC_0 0xa444 |
| #define MISC_REG_AEU_AFTER_INVERT_3_FUNC_1 0xa448 |
| /* [R 32] read third 32 bit after inversion of mcp. mapped as follows: [0] |
| CSEMI Parity error; [1] CSEMI Hw interrupt; [2] PXP Parity error; [3] PXP |
| Hw interrupt; [4] PXPpciClockClient Parity error; [5] PXPpciClockClient |
| Hw interrupt; [6] CFC Parity error; [7] CFC Hw interrupt; [8] CDU Parity |
| error; [9] CDU Hw interrupt; [10] DMAE Parity error; [11] DMAE Hw |
| interrupt; [12] IGU (HC) Parity error; [13] IGU (HC) Hw interrupt; [14] |
| MISC Parity error; [15] MISC Hw interrupt; [16] pxp_misc_mps_attn; [17] |
| Flash event; [18] SMB event; [19] MCP attn0; [20] MCP attn1; [21] SW |
| timers attn_1 func0; [22] SW timers attn_2 func0; [23] SW timers attn_3 |
| func0; [24] SW timers attn_4 func0; [25] PERST; [26] SW timers attn_1 |
| func1; [27] SW timers attn_2 func1; [28] SW timers attn_3 func1; [29] SW |
| timers attn_4 func1; [30] General attn0; [31] General attn1; */ |
| #define MISC_REG_AEU_AFTER_INVERT_3_MCP 0xa44c |
| /* [R 32] read fourth 32 bit after inversion of function 0. mapped as |
| follows: [0] General attn2; [1] General attn3; [2] General attn4; [3] |
| General attn5; [4] General attn6; [5] General attn7; [6] General attn8; |
| [7] General attn9; [8] General attn10; [9] General attn11; [10] General |
| attn12; [11] General attn13; [12] General attn14; [13] General attn15; |
| [14] General attn16; [15] General attn17; [16] General attn18; [17] |
| General attn19; [18] General attn20; [19] General attn21; [20] Main power |
| interrupt; [21] RBCR Latched attn; [22] RBCT Latched attn; [23] RBCN |
| Latched attn; [24] RBCU Latched attn; [25] RBCP Latched attn; [26] GRC |
| Latched timeout attention; [27] GRC Latched reserved access attention; |
| [28] MCP Latched rom_parity; [29] MCP Latched ump_rx_parity; [30] MCP |
| Latched ump_tx_parity; [31] MCP Latched scpad_parity; */ |
| #define MISC_REG_AEU_AFTER_INVERT_4_FUNC_0 0xa450 |
| #define MISC_REG_AEU_AFTER_INVERT_4_FUNC_1 0xa454 |
| /* [R 32] read fourth 32 bit after inversion of mcp. mapped as follows: [0] |
| General attn2; [1] General attn3; [2] General attn4; [3] General attn5; |
| [4] General attn6; [5] General attn7; [6] General attn8; [7] General |
| attn9; [8] General attn10; [9] General attn11; [10] General attn12; [11] |
| General attn13; [12] General attn14; [13] General attn15; [14] General |
| attn16; [15] General attn17; [16] General attn18; [17] General attn19; |
| [18] General attn20; [19] General attn21; [20] Main power interrupt; [21] |
| RBCR Latched attn; [22] RBCT Latched attn; [23] RBCN Latched attn; [24] |
| RBCU Latched attn; [25] RBCP Latched attn; [26] GRC Latched timeout |
| attention; [27] GRC Latched reserved access attention; [28] MCP Latched |
| rom_parity; [29] MCP Latched ump_rx_parity; [30] MCP Latched |
| ump_tx_parity; [31] MCP Latched scpad_parity; */ |
| #define MISC_REG_AEU_AFTER_INVERT_4_MCP 0xa458 |
| /* [R 32] Read fifth 32 bit after inversion of function 0. Mapped as |
| * follows: [0] PGLUE config_space; [1] PGLUE misc_flr; [2] PGLUE B RBC |
| * attention [3] PGLUE B RBC parity; [4] ATC attention; [5] ATC parity; [6] |
| * CNIG attention (reserved); [7] CNIG parity (reserved); [31-8] Reserved; */ |
| #define MISC_REG_AEU_AFTER_INVERT_5_FUNC_0 0xa700 |
| /* [W 14] write to this register results with the clear of the latched |
| signals; one in d0 clears RBCR latch; one in d1 clears RBCT latch; one in |
| d2 clears RBCN latch; one in d3 clears RBCU latch; one in d4 clears RBCP |
| latch; one in d5 clears GRC Latched timeout attention; one in d6 clears |
| GRC Latched reserved access attention; one in d7 clears Latched |
| rom_parity; one in d8 clears Latched ump_rx_parity; one in d9 clears |
| Latched ump_tx_parity; one in d10 clears Latched scpad_parity (both |
| ports); one in d11 clears pxpv_misc_mps_attn; one in d12 clears |
| pxp_misc_exp_rom_attn0; one in d13 clears pxp_misc_exp_rom_attn1; read |
| from this register return zero */ |
| #define MISC_REG_AEU_CLR_LATCH_SIGNAL 0xa45c |
| /* [RW 32] first 32b for enabling the output for function 0 output0. mapped |
| as follows: [0] NIG attention for function0; [1] NIG attention for |
| function1; [2] GPIO1 function 0; [3] GPIO2 function 0; [4] GPIO3 function |
| 0; [5] GPIO4 function 0; [6] GPIO1 function 1; [7] GPIO2 function 1; [8] |
| GPIO3 function 1; [9] GPIO4 function 1; [10] PCIE glue/PXP VPD event |
| function0; [11] PCIE glue/PXP VPD event function1; [12] PCIE glue/PXP |
| Expansion ROM event0; [13] PCIE glue/PXP Expansion ROM event1; [14] |
| SPIO4; [15] SPIO5; [16] MSI/X indication for function 0; [17] MSI/X |
| indication for function 1; [18] BRB Parity error; [19] BRB Hw interrupt; |
| [20] PRS Parity error; [21] PRS Hw interrupt; [22] SRC Parity error; [23] |
| SRC Hw interrupt; [24] TSDM Parity error; [25] TSDM Hw interrupt; [26] |
| TCM Parity error; [27] TCM Hw interrupt; [28] TSEMI Parity error; [29] |
| TSEMI Hw interrupt; [30] PBF Parity error; [31] PBF Hw interrupt; */ |
| #define MISC_REG_AEU_ENABLE1_FUNC_0_OUT_0 0xa06c |
| #define MISC_REG_AEU_ENABLE1_FUNC_0_OUT_1 0xa07c |
| #define MISC_REG_AEU_ENABLE1_FUNC_0_OUT_2 0xa08c |
| #define MISC_REG_AEU_ENABLE1_FUNC_0_OUT_3 0xa09c |
| #define MISC_REG_AEU_ENABLE1_FUNC_0_OUT_5 0xa0bc |
| #define MISC_REG_AEU_ENABLE1_FUNC_0_OUT_6 0xa0cc |
| #define MISC_REG_AEU_ENABLE1_FUNC_0_OUT_7 0xa0dc |
| /* [RW 32] first 32b for enabling the output for function 1 output0. mapped |
| as follows: [0] NIG attention for function0; [1] NIG attention for |
| function1; [2] GPIO1 function 1; [3] GPIO2 function 1; [4] GPIO3 function |
| 1; [5] GPIO4 function 1; [6] GPIO1 function 1; [7] GPIO2 function 1; [8] |
| GPIO3 function 1; [9] GPIO4 function 1; [10] PCIE glue/PXP VPD event |
| function0; [11] PCIE glue/PXP VPD event function1; [12] PCIE glue/PXP |
| Expansion ROM event0; [13] PCIE glue/PXP Expansion ROM event1; [14] |
| SPIO4; [15] SPIO5; [16] MSI/X indication for function 1; [17] MSI/X |
| indication for function 1; [18] BRB Parity error; [19] BRB Hw interrupt; |
| [20] PRS Parity error; [21] PRS Hw interrupt; [22] SRC Parity error; [23] |
| SRC Hw interrupt; [24] TSDM Parity error; [25] TSDM Hw interrupt; [26] |
| TCM Parity error; [27] TCM Hw interrupt; [28] TSEMI Parity error; [29] |
| TSEMI Hw interrupt; [30] PBF Parity error; [31] PBF Hw interrupt; */ |
| #define MISC_REG_AEU_ENABLE1_FUNC_1_OUT_0 0xa10c |
| #define MISC_REG_AEU_ENABLE1_FUNC_1_OUT_1 0xa11c |
| #define MISC_REG_AEU_ENABLE1_FUNC_1_OUT_2 0xa12c |
| #define MISC_REG_AEU_ENABLE1_FUNC_1_OUT_3 0xa13c |
| #define MISC_REG_AEU_ENABLE1_FUNC_1_OUT_5 0xa15c |
| #define MISC_REG_AEU_ENABLE1_FUNC_1_OUT_6 0xa16c |
| #define MISC_REG_AEU_ENABLE1_FUNC_1_OUT_7 0xa17c |
| /* [RW 32] first 32b for enabling the output for close the gate nig. mapped |
| as follows: [0] NIG attention for function0; [1] NIG attention for |
| function1; [2] GPIO1 function 0; [3] GPIO2 function 0; [4] GPIO3 function |
| 0; [5] GPIO4 function 0; [6] GPIO1 function 1; [7] GPIO2 function 1; [8] |
| GPIO3 function 1; [9] GPIO4 function 1; [10] PCIE glue/PXP VPD event |
| function0; [11] PCIE glue/PXP VPD event function1; [12] PCIE glue/PXP |
| Expansion ROM event0; [13] PCIE glue/PXP Expansion ROM event1; [14] |
| SPIO4; [15] SPIO5; [16] MSI/X indication for function 0; [17] MSI/X |
| indication for function 1; [18] BRB Parity error; [19] BRB Hw interrupt; |
| [20] PRS Parity error; [21] PRS Hw interrupt; [22] SRC Parity error; [23] |
| SRC Hw interrupt; [24] TSDM Parity error; [25] TSDM Hw interrupt; [26] |
| TCM Parity error; [27] TCM Hw interrupt; [28] TSEMI Parity error; [29] |
| TSEMI Hw interrupt; [30] PBF Parity error; [31] PBF Hw interrupt; */ |
| #define MISC_REG_AEU_ENABLE1_NIG_0 0xa0ec |
| #define MISC_REG_AEU_ENABLE1_NIG_1 0xa18c |
| /* [RW 32] first 32b for enabling the output for close the gate pxp. mapped |
| as follows: [0] NIG attention for function0; [1] NIG attention for |
| function1; [2] GPIO1 function 0; [3] GPIO2 function 0; [4] GPIO3 function |
| 0; [5] GPIO4 function 0; [6] GPIO1 function 1; [7] GPIO2 function 1; [8] |
| GPIO3 function 1; [9] GPIO4 function 1; [10] PCIE glue/PXP VPD event |
| function0; [11] PCIE glue/PXP VPD event function1; [12] PCIE glue/PXP |
| Expansion ROM event0; [13] PCIE glue/PXP Expansion ROM event1; [14] |
| SPIO4; [15] SPIO5; [16] MSI/X indication for function 0; [17] MSI/X |
| indication for function 1; [18] BRB Parity error; [19] BRB Hw interrupt; |
| [20] PRS Parity error; [21] PRS Hw interrupt; [22] SRC Parity error; [23] |
| SRC Hw interrupt; [24] TSDM Parity error; [25] TSDM Hw interrupt; [26] |
| TCM Parity error; [27] TCM Hw interrupt; [28] TSEMI Parity error; [29] |
| TSEMI Hw interrupt; [30] PBF Parity error; [31] PBF Hw interrupt; */ |
| #define MISC_REG_AEU_ENABLE1_PXP_0 0xa0fc |
| #define MISC_REG_AEU_ENABLE1_PXP_1 0xa19c |
| /* [RW 32] second 32b for enabling the output for function 0 output0. mapped |
| as follows: [0] PBClient Parity error; [1] PBClient Hw interrupt; [2] QM |
| Parity error; [3] QM Hw interrupt; [4] Timers Parity error; [5] Timers Hw |
| interrupt; [6] XSDM Parity error; [7] XSDM Hw interrupt; [8] XCM Parity |
| error; [9] XCM Hw interrupt; [10] XSEMI Parity error; [11] XSEMI Hw |
| interrupt; [12] DoorbellQ Parity error; [13] DoorbellQ Hw interrupt; [14] |
| NIG Parity error; [15] NIG Hw interrupt; [16] Vaux PCI core Parity error; |
| [17] Vaux PCI core Hw interrupt; [18] Debug Parity error; [19] Debug Hw |
| interrupt; [20] USDM Parity error; [21] USDM Hw interrupt; [22] UCM |
| Parity error; [23] UCM Hw interrupt; [24] USEMI Parity error; [25] USEMI |
| Hw interrupt; [26] UPB Parity error; [27] UPB Hw interrupt; [28] CSDM |
| Parity error; [29] CSDM Hw interrupt; [30] CCM Parity error; [31] CCM Hw |
| interrupt; */ |
| #define MISC_REG_AEU_ENABLE2_FUNC_0_OUT_0 0xa070 |
| #define MISC_REG_AEU_ENABLE2_FUNC_0_OUT_1 0xa080 |
| /* [RW 32] second 32b for enabling the output for function 1 output0. mapped |
| as follows: [0] PBClient Parity error; [1] PBClient Hw interrupt; [2] QM |
| Parity error; [3] QM Hw interrupt; [4] Timers Parity error; [5] Timers Hw |
| interrupt; [6] XSDM Parity error; [7] XSDM Hw interrupt; [8] XCM Parity |
| error; [9] XCM Hw interrupt; [10] XSEMI Parity error; [11] XSEMI Hw |
| interrupt; [12] DoorbellQ Parity error; [13] DoorbellQ Hw interrupt; [14] |
| NIG Parity error; [15] NIG Hw interrupt; [16] Vaux PCI core Parity error; |
| [17] Vaux PCI core Hw interrupt; [18] Debug Parity error; [19] Debug Hw |
| interrupt; [20] USDM Parity error; [21] USDM Hw interrupt; [22] UCM |
| Parity error; [23] UCM Hw interrupt; [24] USEMI Parity error; [25] USEMI |
| Hw interrupt; [26] UPB Parity error; [27] UPB Hw interrupt; [28] CSDM |
| Parity error; [29] CSDM Hw interrupt; [30] CCM Parity error; [31] CCM Hw |
| interrupt; */ |
| #define MISC_REG_AEU_ENABLE2_FUNC_1_OUT_0 0xa110 |
| #define MISC_REG_AEU_ENABLE2_FUNC_1_OUT_1 0xa120 |
| /* [RW 32] second 32b for enabling the output for close the gate nig. mapped |
| as follows: [0] PBClient Parity error; [1] PBClient Hw interrupt; [2] QM |
| Parity error; [3] QM Hw interrupt; [4] Timers Parity error; [5] Timers Hw |
| interrupt; [6] XSDM Parity error; [7] XSDM Hw interrupt; [8] XCM Parity |
| error; [9] XCM Hw interrupt; [10] XSEMI Parity error; [11] XSEMI Hw |
| interrupt; [12] DoorbellQ Parity error; [13] DoorbellQ Hw interrupt; [14] |
| NIG Parity error; [15] NIG Hw interrupt; [16] Vaux PCI core Parity error; |
| [17] Vaux PCI core Hw interrupt; [18] Debug Parity error; [19] Debug Hw |
| interrupt; [20] USDM Parity error; [21] USDM Hw interrupt; [22] UCM |
| Parity error; [23] UCM Hw interrupt; [24] USEMI Parity error; [25] USEMI |
| Hw interrupt; [26] UPB Parity error; [27] UPB Hw interrupt; [28] CSDM |
| Parity error; [29] CSDM Hw interrupt; [30] CCM Parity error; [31] CCM Hw |
| interrupt; */ |
| #define MISC_REG_AEU_ENABLE2_NIG_0 0xa0f0 |
| #define MISC_REG_AEU_ENABLE2_NIG_1 0xa190 |
| /* [RW 32] second 32b for enabling the output for close the gate pxp. mapped |
| as follows: [0] PBClient Parity error; [1] PBClient Hw interrupt; [2] QM |
| Parity error; [3] QM Hw interrupt; [4] Timers Parity error; [5] Timers Hw |
| interrupt; [6] XSDM Parity error; [7] XSDM Hw interrupt; [8] XCM Parity |
| error; [9] XCM Hw interrupt; [10] XSEMI Parity error; [11] XSEMI Hw |
| interrupt; [12] DoorbellQ Parity error; [13] DoorbellQ Hw interrupt; [14] |
| NIG Parity error; [15] NIG Hw interrupt; [16] Vaux PCI core Parity error; |
| [17] Vaux PCI core Hw interrupt; [18] Debug Parity error; [19] Debug Hw |
| interrupt; [20] USDM Parity error; [21] USDM Hw interrupt; [22] UCM |
| Parity error; [23] UCM Hw interrupt; [24] USEMI Parity error; [25] USEMI |
| Hw interrupt; [26] UPB Parity error; [27] UPB Hw interrupt; [28] CSDM |
| Parity error; [29] CSDM Hw interrupt; [30] CCM Parity error; [31] CCM Hw |
| interrupt; */ |
| #define MISC_REG_AEU_ENABLE2_PXP_0 0xa100 |
| #define MISC_REG_AEU_ENABLE2_PXP_1 0xa1a0 |
| /* [RW 32] third 32b for enabling the output for function 0 output0. mapped |
| as follows: [0] CSEMI Parity error; [1] CSEMI Hw interrupt; [2] PXP |
| Parity error; [3] PXP Hw interrupt; [4] PXPpciClockClient Parity error; |
| [5] PXPpciClockClient Hw interrupt; [6] CFC Parity error; [7] CFC Hw |
| interrupt; [8] CDU Parity error; [9] CDU Hw interrupt; [10] DMAE Parity |
| error; [11] DMAE Hw interrupt; [12] IGU (HC) Parity error; [13] IGU (HC) |
| Hw interrupt; [14] MISC Parity error; [15] MISC Hw interrupt; [16] |
| pxp_misc_mps_attn; [17] Flash event; [18] SMB event; [19] MCP attn0; [20] |
| MCP attn1; [21] SW timers attn_1 func0; [22] SW timers attn_2 func0; [23] |
| SW timers attn_3 func0; [24] SW timers attn_4 func0; [25] PERST; [26] SW |
| timers attn_1 func1; [27] SW timers attn_2 func1; [28] SW timers attn_3 |
| func1; [29] SW timers attn_4 func1; [30] General attn0; [31] General |
| attn1; */ |
| #define MISC_REG_AEU_ENABLE3_FUNC_0_OUT_0 0xa074 |
| #define MISC_REG_AEU_ENABLE3_FUNC_0_OUT_1 0xa084 |
| /* [RW 32] third 32b for enabling the output for function 1 output0. mapped |
| as follows: [0] CSEMI Parity error; [1] CSEMI Hw interrupt; [2] PXP |
| Parity error; [3] PXP Hw interrupt; [4] PXPpciClockClient Parity error; |
| [5] PXPpciClockClient Hw interrupt; [6] CFC Parity error; [7] CFC Hw |
| interrupt; [8] CDU Parity error; [9] CDU Hw interrupt; [10] DMAE Parity |
| error; [11] DMAE Hw interrupt; [12] IGU (HC) Parity error; [13] IGU (HC) |
| Hw interrupt; [14] MISC Parity error; [15] MISC Hw interrupt; [16] |
| pxp_misc_mps_attn; [17] Flash event; [18] SMB event; [19] MCP attn0; [20] |
| MCP attn1; [21] SW timers attn_1 func0; [22] SW timers attn_2 func0; [23] |
| SW timers attn_3 func0; [24] SW timers attn_4 func0; [25] PERST; [26] SW |
| timers attn_1 func1; [27] SW timers attn_2 func1; [28] SW timers attn_3 |
| func1; [29] SW timers attn_4 func1; [30] General attn0; [31] General |
| attn1; */ |
| #define MISC_REG_AEU_ENABLE3_FUNC_1_OUT_0 0xa114 |
| #define MISC_REG_AEU_ENABLE3_FUNC_1_OUT_1 0xa124 |
| /* [RW 32] third 32b for enabling the output for close the gate nig. mapped |
| as follows: [0] CSEMI Parity error; [1] CSEMI Hw interrupt; [2] PXP |
| Parity error; [3] PXP Hw interrupt; [4] PXPpciClockClient Parity error; |
| [5] PXPpciClockClient Hw interrupt; [6] CFC Parity error; [7] CFC Hw |
| interrupt; [8] CDU Parity error; [9] CDU Hw interrupt; [10] DMAE Parity |
| error; [11] DMAE Hw interrupt; [12] IGU (HC) Parity error; [13] IGU (HC) |
| Hw interrupt; [14] MISC Parity error; [15] MISC Hw interrupt; [16] |
| pxp_misc_mps_attn; [17] Flash event; [18] SMB event; [19] MCP attn0; [20] |
| MCP attn1; [21] SW timers attn_1 func0; [22] SW timers attn_2 func0; [23] |
| SW timers attn_3 func0; [24] SW timers attn_4 func0; [25] PERST; [26] SW |
| timers attn_1 func1; [27] SW timers attn_2 func1; [28] SW timers attn_3 |
| func1; [29] SW timers attn_4 func1; [30] General attn0; [31] General |
| attn1; */ |
| #define MISC_REG_AEU_ENABLE3_NIG_0 0xa0f4 |
| #define MISC_REG_AEU_ENABLE3_NIG_1 0xa194 |
| /* [RW 32] third 32b for enabling the output for close the gate pxp. mapped |
| as follows: [0] CSEMI Parity error; [1] CSEMI Hw interrupt; [2] PXP |
| Parity error; [3] PXP Hw interrupt; [4] PXPpciClockClient Parity error; |
| [5] PXPpciClockClient Hw interrupt; [6] CFC Parity error; [7] CFC Hw |
| interrupt; [8] CDU Parity error; [9] CDU Hw interrupt; [10] DMAE Parity |
| error; [11] DMAE Hw interrupt; [12] IGU (HC) Parity error; [13] IGU (HC) |
| Hw interrupt; [14] MISC Parity error; [15] MISC Hw interrupt; [16] |
| pxp_misc_mps_attn; [17] Flash event; [18] SMB event; [19] MCP attn0; [20] |
| MCP attn1; [21] SW timers attn_1 func0; [22] SW timers attn_2 func0; [23] |
| SW timers attn_3 func0; [24] SW timers attn_4 func0; [25] PERST; [26] SW |
| timers attn_1 func1; [27] SW timers attn_2 func1; [28] SW timers attn_3 |
| func1; [29] SW timers attn_4 func1; [30] General attn0; [31] General |
| attn1; */ |
| #define MISC_REG_AEU_ENABLE3_PXP_0 0xa104 |
| #define MISC_REG_AEU_ENABLE3_PXP_1 0xa1a4 |
| /* [RW 32] fourth 32b for enabling the output for function 0 output0.mapped |
| as follows: [0] General attn2; [1] General attn3; [2] General attn4; [3] |
| General attn5; [4] General attn6; [5] General attn7; [6] General attn8; |
| [7] General attn9; [8] General attn10; [9] General attn11; [10] General |
| attn12; [11] General attn13; [12] General attn14; [13] General attn15; |
| [14] General attn16; [15] General attn17; [16] General attn18; [17] |
| General attn19; [18] General attn20; [19] General attn21; [20] Main power |
| interrupt; [21] RBCR Latched attn; [22] RBCT Latched attn; [23] RBCN |
| Latched attn; [24] RBCU Latched attn; [25] RBCP Latched attn; [26] GRC |
| Latched timeout attention; [27] GRC Latched reserved access attention; |
| [28] MCP Latched rom_parity; [29] MCP Latched ump_rx_parity; [30] MCP |
| Latched ump_tx_parity; [31] MCP Latched scpad_parity; */ |
| #define MISC_REG_AEU_ENABLE4_FUNC_0_OUT_0 0xa078 |
| #define MISC_REG_AEU_ENABLE4_FUNC_0_OUT_2 0xa098 |
| #define MISC_REG_AEU_ENABLE4_FUNC_0_OUT_4 0xa0b8 |
| #define MISC_REG_AEU_ENABLE4_FUNC_0_OUT_5 0xa0c8 |
| #define MISC_REG_AEU_ENABLE4_FUNC_0_OUT_6 0xa0d8 |
| #define MISC_REG_AEU_ENABLE4_FUNC_0_OUT_7 0xa0e8 |
| /* [RW 32] fourth 32b for enabling the output for function 1 output0.mapped |
| as follows: [0] General attn2; [1] General attn3; [2] General attn4; [3] |
| General attn5; [4] General attn6; [5] General attn7; [6] General attn8; |
| [7] General attn9; [8] General attn10; [9] General attn11; [10] General |
| attn12; [11] General attn13; [12] General attn14; [13] General attn15; |
| [14] General attn16; [15] General attn17; [16] General attn18; [17] |
| General attn19; [18] General attn20; [19] General attn21; [20] Main power |
| interrupt; [21] RBCR Latched attn; [22] RBCT Latched attn; [23] RBCN |
| Latched attn; [24] RBCU Latched attn; [25] RBCP Latched attn; [26] GRC |
| Latched timeout attention; [27] GRC Latched reserved access attention; |
| [28] MCP Latched rom_parity; [29] MCP Latched ump_rx_parity; [30] MCP |
| Latched ump_tx_parity; [31] MCP Latched scpad_parity; */ |
| #define MISC_REG_AEU_ENABLE4_FUNC_1_OUT_0 0xa118 |
| #define MISC_REG_AEU_ENABLE4_FUNC_1_OUT_2 0xa138 |
| #define MISC_REG_AEU_ENABLE4_FUNC_1_OUT_4 0xa158 |
| #define MISC_REG_AEU_ENABLE4_FUNC_1_OUT_5 0xa168 |
| #define MISC_REG_AEU_ENABLE4_FUNC_1_OUT_6 0xa178 |
| #define MISC_REG_AEU_ENABLE4_FUNC_1_OUT_7 0xa188 |
| /* [RW 32] fourth 32b for enabling the output for close the gate nig.mapped |
| as follows: [0] General attn2; [1] General attn3; [2] General attn4; [3] |
| General attn5; [4] General attn6; [5] General attn7; [6] General attn8; |
| [7] General attn9; [8] General attn10; [9] General attn11; [10] General |
| attn12; [11] General attn13; [12] General attn14; [13] General attn15; |
| [14] General attn16; [15] General attn17; [16] General attn18; [17] |
| General attn19; [18] General attn20; [19] General attn21; [20] Main power |
| interrupt; [21] RBCR Latched attn; [22] RBCT Latched attn; [23] RBCN |
| Latched attn; [24] RBCU Latched attn; [25] RBCP Latched attn; [26] GRC |
| Latched timeout attention; [27] GRC Latched reserved access attention; |
| [28] MCP Latched rom_parity; [29] MCP Latched ump_rx_parity; [30] MCP |
| Latched ump_tx_parity; [31] MCP Latched scpad_parity; */ |
| #define MISC_REG_AEU_ENABLE4_NIG_0 0xa0f8 |
| #define MISC_REG_AEU_ENABLE4_NIG_1 0xa198 |
| /* [RW 32] fourth 32b for enabling the output for close the gate pxp.mapped |
| as follows: [0] General attn2; [1] General attn3; [2] General attn4; [3] |
| General attn5; [4] General attn6; [5] General attn7; [6] General attn8; |
| [7] General attn9; [8] General attn10; [9] General attn11; [10] General |
| attn12; [11] General attn13; [12] General attn14; [13] General attn15; |
| [14] General attn16; [15] General attn17; [16] General attn18; [17] |
| General attn19; [18] General attn20; [19] General attn21; [20] Main power |
| interrupt; [21] RBCR Latched attn; [22] RBCT Latched attn; [23] RBCN |
| Latched attn; [24] RBCU Latched attn; [25] RBCP Latched attn; [26] GRC |
| Latched timeout attention; [27] GRC Latched reserved access attention; |
| [28] MCP Latched rom_parity; [29] MCP Latched ump_rx_parity; [30] MCP |
| Latched ump_tx_parity; [31] MCP Latched scpad_parity; */ |
| #define MISC_REG_AEU_ENABLE4_PXP_0 0xa108 |
| #define MISC_REG_AEU_ENABLE4_PXP_1 0xa1a8 |
| /* [RW 32] fifth 32b for enabling the output for function 0 output0. Mapped |
| * as follows: [0] PGLUE config_space; [1] PGLUE misc_flr; [2] PGLUE B RBC |
| * attention [3] PGLUE B RBC parity; [4] ATC attention; [5] ATC parity; [6] |
| * mstat0 attention; [7] mstat0 parity; [8] mstat1 attention; [9] mstat1 |
| * parity; [31-10] Reserved; */ |
| #define MISC_REG_AEU_ENABLE5_FUNC_0_OUT_0 0xa688 |
| /* [RW 32] Fifth 32b for enabling the output for function 1 output0. Mapped |
| * as follows: [0] PGLUE config_space; [1] PGLUE misc_flr; [2] PGLUE B RBC |
| * attention [3] PGLUE B RBC parity; [4] ATC attention; [5] ATC parity; [6] |
| * mstat0 attention; [7] mstat0 parity; [8] mstat1 attention; [9] mstat1 |
| * parity; [31-10] Reserved; */ |
| #define MISC_REG_AEU_ENABLE5_FUNC_1_OUT_0 0xa6b0 |
| /* [RW 1] set/clr general attention 0; this will set/clr bit 94 in the aeu |
| 128 bit vector */ |
| #define MISC_REG_AEU_GENERAL_ATTN_0 0xa000 |
| #define MISC_REG_AEU_GENERAL_ATTN_1 0xa004 |
| #define MISC_REG_AEU_GENERAL_ATTN_10 0xa028 |
| #define MISC_REG_AEU_GENERAL_ATTN_11 0xa02c |
| #define MISC_REG_AEU_GENERAL_ATTN_12 0xa030 |
| #define MISC_REG_AEU_GENERAL_ATTN_2 0xa008 |
| #define MISC_REG_AEU_GENERAL_ATTN_3 0xa00c |
| #define MISC_REG_AEU_GENERAL_ATTN_4 0xa010 |
| #define MISC_REG_AEU_GENERAL_ATTN_5 0xa014 |
| #define MISC_REG_AEU_GENERAL_ATTN_6 0xa018 |
| #define MISC_REG_AEU_GENERAL_ATTN_7 0xa01c |
| #define MISC_REG_AEU_GENERAL_ATTN_8 0xa020 |
| #define MISC_REG_AEU_GENERAL_ATTN_9 0xa024 |
| #define MISC_REG_AEU_GENERAL_MASK 0xa61c |
| /* [RW 32] first 32b for inverting the input for function 0; for each bit: |
| 0= do not invert; 1= invert; mapped as follows: [0] NIG attention for |
| function0; [1] NIG attention for function1; [2] GPIO1 mcp; [3] GPIO2 mcp; |
| [4] GPIO3 mcp; [5] GPIO4 mcp; [6] GPIO1 function 1; [7] GPIO2 function 1; |
| [8] GPIO3 function 1; [9] GPIO4 function 1; [10] PCIE glue/PXP VPD event |
| function0; [11] PCIE glue/PXP VPD event function1; [12] PCIE glue/PXP |
| Expansion ROM event0; [13] PCIE glue/PXP Expansion ROM event1; [14] |
| SPIO4; [15] SPIO5; [16] MSI/X indication for mcp; [17] MSI/X indication |
| for function 1; [18] BRB Parity error; [19] BRB Hw interrupt; [20] PRS |
| Parity error; [21] PRS Hw interrupt; [22] SRC Parity error; [23] SRC Hw |
| interrupt; [24] TSDM Parity error; [25] TSDM Hw interrupt; [26] TCM |
| Parity error; [27] TCM Hw interrupt; [28] TSEMI Parity error; [29] TSEMI |
| Hw interrupt; [30] PBF Parity error; [31] PBF Hw interrupt; */ |
| #define MISC_REG_AEU_INVERTER_1_FUNC_0 0xa22c |
| #define MISC_REG_AEU_INVERTER_1_FUNC_1 0xa23c |
| /* [RW 32] second 32b for inverting the input for function 0; for each bit: |
| 0= do not invert; 1= invert. mapped as follows: [0] PBClient Parity |
| error; [1] PBClient Hw interrupt; [2] QM Parity error; [3] QM Hw |
| interrupt; [4] Timers Parity error; [5] Timers Hw interrupt; [6] XSDM |
| Parity error; [7] XSDM Hw interrupt; [8] XCM Parity error; [9] XCM Hw |
| interrupt; [10] XSEMI Parity error; [11] XSEMI Hw interrupt; [12] |
| DoorbellQ Parity error; [13] DoorbellQ Hw interrupt; [14] NIG Parity |
| error; [15] NIG Hw interrupt; [16] Vaux PCI core Parity error; [17] Vaux |
| PCI core Hw interrupt; [18] Debug Parity error; [19] Debug Hw interrupt; |
| [20] USDM Parity error; [21] USDM Hw interrupt; [22] UCM Parity error; |
| [23] UCM Hw interrupt; [24] USEMI Parity error; [25] USEMI Hw interrupt; |
| [26] UPB Parity error; [27] UPB Hw interrupt; [28] CSDM Parity error; |
| [29] CSDM Hw interrupt; [30] CCM Parity error; [31] CCM Hw interrupt; */ |
| #define MISC_REG_AEU_INVERTER_2_FUNC_0 0xa230 |
| #define MISC_REG_AEU_INVERTER_2_FUNC_1 0xa240 |
| /* [RW 10] [7:0] = mask 8 attention output signals toward IGU function0; |
| [9:8] = raserved. Zero = mask; one = unmask */ |
| #define MISC_REG_AEU_MASK_ATTN_FUNC_0 0xa060 |
| #define MISC_REG_AEU_MASK_ATTN_FUNC_1 0xa064 |
| /* [RW 1] If set a system kill occurred */ |
| #define MISC_REG_AEU_SYS_KILL_OCCURRED 0xa610 |
| /* [RW 32] Represent the status of the input vector to the AEU when a system |
| kill occurred. The register is reset in por reset. Mapped as follows: [0] |
| NIG attention for function0; [1] NIG attention for function1; [2] GPIO1 |
| mcp; [3] GPIO2 mcp; [4] GPIO3 mcp; [5] GPIO4 mcp; [6] GPIO1 function 1; |
| [7] GPIO2 function 1; [8] GPIO3 function 1; [9] GPIO4 function 1; [10] |
| PCIE glue/PXP VPD event function0; [11] PCIE glue/PXP VPD event |
| function1; [12] PCIE glue/PXP Expansion ROM event0; [13] PCIE glue/PXP |
| Expansion ROM event1; [14] SPIO4; [15] SPIO5; [16] MSI/X indication for |
| mcp; [17] MSI/X indication for function 1; [18] BRB Parity error; [19] |
| BRB Hw interrupt; [20] PRS Parity error; [21] PRS Hw interrupt; [22] SRC |
| Parity error; [23] SRC Hw interrupt; [24] TSDM Parity error; [25] TSDM Hw |
| interrupt; [26] TCM Parity error; [27] TCM Hw interrupt; [28] TSEMI |
| Parity error; [29] TSEMI Hw interrupt; [30] PBF Parity error; [31] PBF Hw |
| interrupt; */ |
| #define MISC_REG_AEU_SYS_KILL_STATUS_0 0xa600 |
| #define MISC_REG_AEU_SYS_KILL_STATUS_1 0xa604 |
| #define MISC_REG_AEU_SYS_KILL_STATUS_2 0xa608 |
| #define MISC_REG_AEU_SYS_KILL_STATUS_3 0xa60c |
| /* [R 4] This field indicates the type of the device. '0' - 2 Ports; '1' - 1 |
| Port. */ |
| #define MISC_REG_BOND_ID 0xa400 |
| /* [R 8] These bits indicate the metal revision of the chip. This value |
| starts at 0x00 for each all-layer tape-out and increments by one for each |
| tape-out. */ |
| #define MISC_REG_CHIP_METAL 0xa404 |
| /* [R 16] These bits indicate the part number for the chip. */ |
| #define MISC_REG_CHIP_NUM 0xa408 |
| /* [R 4] These bits indicate the base revision of the chip. This value |
| starts at 0x0 for the A0 tape-out and increments by one for each |
| all-layer tape-out. */ |
| #define MISC_REG_CHIP_REV 0xa40c |
| /* [R 14] otp_misc_do[100:0] spare bits collection: 13:11- |
| * otp_misc_do[100:98]; 10:7 - otp_misc_do[87:84]; 6:3 - otp_misc_do[75:72]; |
| * 2:1 - otp_misc_do[51:50]; 0 - otp_misc_do[1]. */ |
| #define MISC_REG_CHIP_TYPE 0xac60 |
| #define MISC_REG_CHIP_TYPE_57811_MASK (1<<1) |
| #define MISC_REG_CPMU_LP_DR_ENABLE 0xa858 |
| /* [RW 1] FW EEE LPI Enable. When 1 indicates that EEE LPI mode is enabled |
| * by FW. When 0 indicates that the EEE LPI mode is disabled by FW. Clk |
| * 25MHz. Reset on hard reset. */ |
| #define MISC_REG_CPMU_LP_FW_ENABLE_P0 0xa84c |
| /* [RW 32] EEE LPI Idle Threshold. The threshold value for the idle EEE LPI |
| * counter. Timer tick is 1 us. Clock 25MHz. Reset on hard reset. */ |
| #define MISC_REG_CPMU_LP_IDLE_THR_P0 0xa8a0 |
| /* [RW 18] LPI entry events mask. [0] - Vmain SM Mask. When 1 indicates that |
| * the Vmain SM end state is disabled. When 0 indicates that the Vmain SM |
| * end state is enabled. [1] - FW Queues Empty Mask. When 1 indicates that |
| * the FW command that all Queues are empty is disabled. When 0 indicates |
| * that the FW command that all Queues are empty is enabled. [2] - FW Early |
| * Exit Mask / Reserved (Entry mask). When 1 indicates that the FW Early |
| * Exit command is disabled. When 0 indicates that the FW Early Exit command |
| * is enabled. This bit applicable only in the EXIT Events Mask registers. |
| * [3] - PBF Request Mask. When 1 indicates that the PBF Request indication |
| * is disabled. When 0 indicates that the PBF Request indication is enabled. |
| * [4] - Tx Request Mask. When =1 indicates that the Tx other Than PBF |
| * Request indication is disabled. When 0 indicates that the Tx Other Than |
| * PBF Request indication is enabled. [5] - Rx EEE LPI Status Mask. When 1 |
| * indicates that the RX EEE LPI Status indication is disabled. When 0 |
| * indicates that the RX EEE LPI Status indication is enabled. In the EXIT |
| * Events Masks registers; this bit masks the falling edge detect of the LPI |
| * Status (Rx LPI is on - off). [6] - Tx Pause Mask. When 1 indicates that |
| * the Tx Pause indication is disabled. When 0 indicates that the Tx Pause |
| * indication is enabled. [7] - BRB1 Empty Mask. When 1 indicates that the |
| * BRB1 EMPTY indication is disabled. When 0 indicates that the BRB1 EMPTY |
| * indication is enabled. [8] - QM Idle Mask. When 1 indicates that the QM |
| * IDLE indication is disabled. When 0 indicates that the QM IDLE indication |
| * is enabled. (One bit for both VOQ0 and VOQ1). [9] - QM LB Idle Mask. When |
| * 1 indicates that the QM IDLE indication for LOOPBACK is disabled. When 0 |
| * indicates that the QM IDLE indication for LOOPBACK is enabled. [10] - L1 |
| * Status Mask. When 1 indicates that the L1 Status indication from the PCIE |
| * CORE is disabled. When 0 indicates that the RX EEE LPI Status indication |
| * from the PCIE CORE is enabled. In the EXIT Events Masks registers; this |
| * bit masks the falling edge detect of the L1 status (L1 is on - off). [11] |
| * - P0 E0 EEE EEE LPI REQ Mask. When =1 indicates that the P0 E0 EEE EEE |
| * LPI REQ indication is disabled. When =0 indicates that the P0 E0 EEE LPI |
| * REQ indication is enabled. [12] - P1 E0 EEE LPI REQ Mask. When =1 |
| * indicates that the P0 EEE LPI REQ indication is disabled. When =0 |
| * indicates that the P0 EEE LPI REQ indication is enabled. [13] - P0 E1 EEE |
| * LPI REQ Mask. When =1 indicates that the P0 EEE LPI REQ indication is |
| * disabled. When =0 indicates that the P0 EEE LPI REQ indication is |
| * enabled. [14] - P1 E1 EEE LPI REQ Mask. When =1 indicates that the P0 EEE |
| * LPI REQ indication is disabled. When =0 indicates that the P0 EEE LPI REQ |
| * indication is enabled. [15] - L1 REQ Mask. When =1 indicates that the L1 |
| * REQ indication is disabled. When =0 indicates that the L1 indication is |
| * enabled. [16] - Rx EEE LPI Status Edge Detect Mask. When =1 indicates |
| * that the RX EEE LPI Status Falling Edge Detect indication is disabled (Rx |
| * EEE LPI is on - off). When =0 indicates that the RX EEE LPI Status |
| * Falling Edge Detec indication is enabled (Rx EEE LPI is on - off). This |
| * bit is applicable only in the EXIT Events Masks registers. [17] - L1 |
| * Status Edge Detect Mask. When =1 indicates that the L1 Status Falling |
| * Edge Detect indication from the PCIE CORE is disabled (L1 is on - off). |
| * When =0 indicates that the L1 Status Falling Edge Detect indication from |
| * the PCIE CORE is enabled (L1 is on - off). This bit is applicable only in |
| * the EXIT Events Masks registers. Clock 25MHz. Reset on hard reset. */ |
| #define MISC_REG_CPMU_LP_MASK_ENT_P0 0xa880 |
| /* [RW 18] EEE LPI exit events mask. [0] - Vmain SM Mask. When 1 indicates |
| * that the Vmain SM end state is disabled. When 0 indicates that the Vmain |
| * SM end state is enabled. [1] - FW Queues Empty Mask. When 1 indicates |
| * that the FW command that all Queues are empty is disabled. When 0 |
| * indicates that the FW command that all Queues are empty is enabled. [2] - |
| * FW Early Exit Mask / Reserved (Entry mask). When 1 indicates that the FW |
| * Early Exit command is disabled. When 0 indicates that the FW Early Exit |
| * command is enabled. This bit applicable only in the EXIT Events Mask |
| * registers. [3] - PBF Request Mask. When 1 indicates that the PBF Request |
| * indication is disabled. When 0 indicates that the PBF Request indication |
| * is enabled. [4] - Tx Request Mask. When =1 indicates that the Tx other |
| * Than PBF Request indication is disabled. When 0 indicates that the Tx |
| * Other Than PBF Request indication is enabled. [5] - Rx EEE LPI Status |
| * Mask. When 1 indicates that the RX EEE LPI Status indication is disabled. |
| * When 0 indicates that the RX LPI Status indication is enabled. In the |
| * EXIT Events Masks registers; this bit masks the falling edge detect of |
| * the EEE LPI Status (Rx EEE LPI is on - off). [6] - Tx Pause Mask. When 1 |
| * indicates that the Tx Pause indication is disabled. When 0 indicates that |
| * the Tx Pause indication is enabled. [7] - BRB1 Empty Mask. When 1 |
| * indicates that the BRB1 EMPTY indication is disabled. When 0 indicates |
| * that the BRB1 EMPTY indication is enabled. [8] - QM Idle Mask. When 1 |
| * indicates that the QM IDLE indication is disabled. When 0 indicates that |
| * the QM IDLE indication is enabled. (One bit for both VOQ0 and VOQ1). [9] |
| * - QM LB Idle Mask. When 1 indicates that the QM IDLE indication for |
| * LOOPBACK is disabled. When 0 indicates that the QM IDLE indication for |
| * LOOPBACK is enabled. [10] - L1 Status Mask. When 1 indicates that the L1 |
| * Status indication from the PCIE CORE is disabled. When 0 indicates that |
| * the RX EEE LPI Status indication from the PCIE CORE is enabled. In the |
| * EXIT Events Masks registers; this bit masks the falling edge detect of |
| * the L1 status (L1 is on - off). [11] - P0 E0 EEE EEE LPI REQ Mask. When |
| * =1 indicates that the P0 E0 EEE EEE LPI REQ indication is disabled. When |
| * =0 indicates that the P0 E0 EEE LPI REQ indication is enabled. [12] - P1 |
| * E0 EEE LPI REQ Mask. When =1 indicates that the P0 EEE LPI REQ indication |
| * is disabled. When =0 indicates that the P0 EEE LPI REQ indication is |
| * enabled. [13] - P0 E1 EEE LPI REQ Mask. When =1 indicates that the P0 EEE |
| * LPI REQ indication is disabled. When =0 indicates that the P0 EEE LPI REQ |
| * indication is enabled. [14] - P1 E1 EEE LPI REQ Mask. When =1 indicates |
| * that the P0 EEE LPI REQ indication is disabled. When =0 indicates that |
| * the P0 EEE LPI REQ indication is enabled. [15] - L1 REQ Mask. When =1 |
| * indicates that the L1 REQ indication is disabled. When =0 indicates that |
| * the L1 indication is enabled. [16] - Rx EEE LPI Status Edge Detect Mask. |
| * When =1 indicates that the RX EEE LPI Status Falling Edge Detect |
| * indication is disabled (Rx EEE LPI is on - off). When =0 indicates that |
| * the RX EEE LPI Status Falling Edge Detec indication is enabled (Rx EEE |
| * LPI is on - off). This bit is applicable only in the EXIT Events Masks |
| * registers. [17] - L1 Status Edge Detect Mask. When =1 indicates that the |
| * L1 Status Falling Edge Detect indication from the PCIE CORE is disabled |
| * (L1 is on - off). When =0 indicates that the L1 Status Falling Edge |
| * Detect indication from the PCIE CORE is enabled (L1 is on - off). This |
| * bit is applicable only in the EXIT Events Masks registers.Clock 25MHz. |
| * Reset on hard reset. */ |
| #define MISC_REG_CPMU_LP_MASK_EXT_P0 0xa888 |
| /* [RW 16] EEE LPI Entry Events Counter. A statistic counter with the number |
| * of counts that the SM entered the EEE LPI state. Clock 25MHz. Read only |
| * register. Reset on hard reset. */ |
| #define MISC_REG_CPMU_LP_SM_ENT_CNT_P0 0xa8b8 |
| /* [RW 16] EEE LPI Entry Events Counter. A statistic counter with the number |
| * of counts that the SM entered the EEE LPI state. Clock 25MHz. Read only |
| * register. Reset on hard reset. */ |
| #define MISC_REG_CPMU_LP_SM_ENT_CNT_P1 0xa8bc |
| /* [RW 32] The following driver registers(1...16) represent 16 drivers and |
| 32 clients. Each client can be controlled by one driver only. One in each |
| bit represent that this driver control the appropriate client (Ex: bit 5 |
| is set means this driver control client number 5). addr1 = set; addr0 = |
| clear; read from both addresses will give the same result = status. write |
| to address 1 will set a request to control all the clients that their |
| appropriate bit (in the write command) is set. if the client is free (the |
| appropriate bit in all the other drivers is clear) one will be written to |
| that driver register; if the client isn't free the bit will remain zero. |
| if the appropriate bit is set (the driver request to gain control on a |
| client it already controls the ~MISC_REGISTERS_INT_STS.GENERIC_SW |
| interrupt will be asserted). write to address 0 will set a request to |
| free all the clients that their appropriate bit (in the write command) is |
| set. if the appropriate bit is clear (the driver request to free a client |
| it doesn't controls the ~MISC_REGISTERS_INT_STS.GENERIC_SW interrupt will |
| be asserted). */ |
| #define MISC_REG_DRIVER_CONTROL_1 0xa510 |
| #define MISC_REG_DRIVER_CONTROL_7 0xa3c8 |
| /* [RW 1] e1hmf for WOL. If clr WOL signal o the PXP will be send on bit 0 |
| only. */ |
| #define MISC_REG_E1HMF_MODE 0xa5f8 |
| /* [R 1] Status of four port mode path swap input pin. */ |
| #define MISC_REG_FOUR_PORT_PATH_SWAP 0xa75c |
| /* [RW 2] 4 port path swap overwrite.[0] - Overwrite control; if it is 0 - |
| the path_swap output is equal to 4 port mode path swap input pin; if it |
| is 1 - the path_swap output is equal to bit[1] of this register; [1] - |
| Overwrite value. If bit[0] of this register is 1 this is the value that |
| receives the path_swap output. Reset on Hard reset. */ |
| #define MISC_REG_FOUR_PORT_PATH_SWAP_OVWR 0xa738 |
| /* [R 1] Status of 4 port mode port swap input pin. */ |
| #define MISC_REG_FOUR_PORT_PORT_SWAP 0xa754 |
| /* [RW 2] 4 port port swap overwrite.[0] - Overwrite control; if it is 0 - |
| the port_swap output is equal to 4 port mode port swap input pin; if it |
| is 1 - the port_swap output is equal to bit[1] of this register; [1] - |
| Overwrite value. If bit[0] of this register is 1 this is the value that |
| receives the port_swap output. Reset on Hard reset. */ |
| #define MISC_REG_FOUR_PORT_PORT_SWAP_OVWR 0xa734 |
| /* [RW 32] Debug only: spare RW register reset by core reset */ |
| #define MISC_REG_GENERIC_CR_0 0xa460 |
| #define MISC_REG_GENERIC_CR_1 0xa464 |
| /* [RW 32] Debug only: spare RW register reset by por reset */ |
| #define MISC_REG_GENERIC_POR_1 0xa474 |
| /* [RW 32] Bit[0]: EPIO MODE SEL: Setting this bit to 1 will allow SW/FW to |
| use all of the 32 Extended GPIO pins. Without setting this bit; an EPIO |
| can not be configured as an output. Each output has its output enable in |
| the MCP register space; but this bit needs to be set to make use of that. |
| Bit[3:1] spare. Bit[4]: WCVTMON_PWRDN: Powerdown for Warpcore VTMON. When |
| set to 1 - Powerdown. Bit[5]: WCVTMON_RESETB: Reset for Warpcore VTMON. |
| When set to 0 - vTMON is in reset. Bit[6]: setting this bit will change |
| the i/o to an output and will drive the TimeSync output. Bit[31:7]: |
| spare. Global register. Reset by hard reset. */ |
| #define MISC_REG_GEN_PURP_HWG 0xa9a0 |
| /* [RW 32] GPIO. [31-28] FLOAT port 0; [27-24] FLOAT port 0; When any of |
| these bits is written as a '1'; the corresponding SPIO bit will turn off |
| it's drivers and become an input. This is the reset state of all GPIO |
| pins. The read value of these bits will be a '1' if that last command |
| (#SET; #CLR; or #FLOAT) for this bit was a #FLOAT. (reset value 0xff). |
| [23-20] CLR port 1; 19-16] CLR port 0; When any of these bits is written |
| as a '1'; the corresponding GPIO bit will drive low. The read value of |
| these bits will be a '1' if that last command (#SET; #CLR; or #FLOAT) for |
| this bit was a #CLR. (reset value 0). [15-12] SET port 1; 11-8] port 0; |
| SET When any of these bits is written as a '1'; the corresponding GPIO |
| bit will drive high (if it has that capability). The read value of these |
| bits will be a '1' if that last command (#SET; #CLR; or #FLOAT) for this |
| bit was a #SET. (reset value 0). [7-4] VALUE port 1; [3-0] VALUE port 0; |
| RO; These bits indicate the read value of each of the eight GPIO pins. |
| This is the result value of the pin; not the drive value. Writing these |
| bits will have not effect. */ |
| #define MISC_REG_GPIO 0xa490 |
| /* [RW 8] These bits enable the GPIO_INTs to signals event to the |
| IGU/MCP.according to the following map: [0] p0_gpio_0; [1] p0_gpio_1; [2] |
| p0_gpio_2; [3] p0_gpio_3; [4] p1_gpio_0; [5] p1_gpio_1; [6] p1_gpio_2; |
| [7] p1_gpio_3; */ |
| #define MISC_REG_GPIO_EVENT_EN 0xa2bc |
| /* [RW 32] GPIO INT. [31-28] OLD_CLR port1; [27-24] OLD_CLR port0; Writing a |
| '1' to these bit clears the corresponding bit in the #OLD_VALUE register. |
| This will acknowledge an interrupt on the falling edge of corresponding |
| GPIO input (reset value 0). [23-16] OLD_SET [23-16] port1; OLD_SET port0; |
| Writing a '1' to these bit sets the corresponding bit in the #OLD_VALUE |
| register. This will acknowledge an interrupt on the rising edge of |
| corresponding SPIO input (reset value 0). [15-12] OLD_VALUE [11-8] port1; |
| OLD_VALUE port0; RO; These bits indicate the old value of the GPIO input |
| value. When the ~INT_STATE bit is set; this bit indicates the OLD value |
| of the pin such that if ~INT_STATE is set and this bit is '0'; then the |
| interrupt is due to a low to high edge. If ~INT_STATE is set and this bit |
| is '1'; then the interrupt is due to a high to low edge (reset value 0). |
| [7-4] INT_STATE port1; [3-0] INT_STATE RO port0; These bits indicate the |
| current GPIO interrupt state for each GPIO pin. This bit is cleared when |
| the appropriate #OLD_SET or #OLD_CLR command bit is written. This bit is |
| set when the GPIO input does not match the current value in #OLD_VALUE |
| (reset value 0). */ |
| #define MISC_REG_GPIO_INT 0xa494 |
| /* [R 28] this field hold the last information that caused reserved |
| attention. bits [19:0] - address; [22:20] function; [23] reserved; |
| [27:24] the master that caused the attention - according to the following |
| encodeing:1 = pxp; 2 = mcp; 3 = usdm; 4 = tsdm; 5 = xsdm; 6 = csdm; 7 = |
| dbu; 8 = dmae */ |
| #define MISC_REG_GRC_RSV_ATTN 0xa3c0 |
| /* [R 28] this field hold the last information that caused timeout |
| attention. bits [19:0] - address; [22:20] function; [23] reserved; |
| [27:24] the master that caused the attention - according to the following |
| encodeing:1 = pxp; 2 = mcp; 3 = usdm; 4 = tsdm; 5 = xsdm; 6 = csdm; 7 = |
| dbu; 8 = dmae */ |
| #define MISC_REG_GRC_TIMEOUT_ATTN 0xa3c4 |
| /* [RW 1] Setting this bit enables a timer in the GRC block to timeout any |
| access that does not finish within |
| ~misc_registers_grc_timout_val.grc_timeout_val cycles. When this bit is |
| cleared; this timeout is disabled. If this timeout occurs; the GRC shall |
| assert it attention output. */ |
| #define MISC_REG_GRC_TIMEOUT_EN 0xa280 |
| /* [RW 28] 28 LSB of LCPLL first register; reset val = 521. inside order of |
| the bits is: [2:0] OAC reset value 001) CML output buffer bias control; |
| 111 for +40%; 011 for +20%; 001 for 0%; 000 for -20%. [5:3] Icp_ctrl |
| (reset value 001) Charge pump current control; 111 for 720u; 011 for |
| 600u; 001 for 480u and 000 for 360u. [7:6] Bias_ctrl (reset value 00) |
| Global bias control; When bit 7 is high bias current will be 10 0gh; When |
| bit 6 is high bias will be 100w; Valid values are 00; 10; 01. [10:8] |
| Pll_observe (reset value 010) Bits to control observability. bit 10 is |
| for test bias; bit 9 is for test CK; bit 8 is test Vc. [12:11] Vth_ctrl |
| (reset value 00) Comparator threshold control. 00 for 0.6V; 01 for 0.54V |
| and 10 for 0.66V. [13] pllSeqStart (reset value 0) Enables VCO tuning |
| sequencer: 1= sequencer disabled; 0= sequencer enabled (inverted |
| internally). [14] reserved (reset value 0) Reset for VCO sequencer is |
| connected to RESET input directly. [15] capRetry_en (reset value 0) |
| enable retry on cap search failure (inverted). [16] freqMonitor_e (reset |
| value 0) bit to continuously monitor vco freq (inverted). [17] |
| freqDetRestart_en (reset value 0) bit to enable restart when not freq |
| locked (inverted). [18] freqDetRetry_en (reset value 0) bit to enable |
| retry on freq det failure(inverted). [19] pllForceFdone_en (reset value |
| 0) bit to enable pllForceFdone & pllForceFpass into pllSeq. [20] |
| pllForceFdone (reset value 0) bit to force freqDone. [21] pllForceFpass |
| (reset value 0) bit to force freqPass. [22] pllForceDone_en (reset value |
| 0) bit to enable pllForceCapDone. [23] pllForceCapDone (reset value 0) |
| bit to force capDone. [24] pllForceCapPass_en (reset value 0) bit to |
| enable pllForceCapPass. [25] pllForceCapPass (reset value 0) bit to force |
| capPass. [26] capRestart (reset value 0) bit to force cap sequencer to |
| restart. [27] capSelectM_en (reset value 0) bit to enable cap select |
| register bits. */ |
| #define MISC_REG_LCPLL_CTRL_1 0xa2a4 |
| #define MISC_REG_LCPLL_CTRL_REG_2 0xa2a8 |
| /* [RW 1] LCPLL power down. Global register. Active High. Reset on POR |
| * reset. */ |
| #define MISC_REG_LCPLL_E40_PWRDWN 0xaa74 |
| /* [RW 1] LCPLL VCO reset. Global register. Active Low Reset on POR reset. */ |
| #define MISC_REG_LCPLL_E40_RESETB_ANA 0xaa78 |
| /* [RW 1] LCPLL post-divider reset. Global register. Active Low Reset on POR |
| * reset. */ |
| #define MISC_REG_LCPLL_E40_RESETB_DIG 0xaa7c |
| /* [RW 4] Interrupt mask register #0 read/write */ |
| #define MISC_REG_MISC_INT_MASK 0xa388 |
| /* [RW 1] Parity mask register #0 read/write */ |
| #define MISC_REG_MISC_PRTY_MASK 0xa398 |
| /* [R 1] Parity register #0 read */ |
| #define MISC_REG_MISC_PRTY_STS 0xa38c |
| /* [RC 1] Parity register #0 read clear */ |
| #define MISC_REG_MISC_PRTY_STS_CLR 0xa390 |
| #define MISC_REG_NIG_WOL_P0 0xa270 |
| #define MISC_REG_NIG_WOL_P1 0xa274 |
| /* [R 1] If set indicate that the pcie_rst_b was asserted without perst |
| assertion */ |
| #define MISC_REG_PCIE_HOT_RESET 0xa618 |
| /* [RW 32] 32 LSB of storm PLL first register; reset val = 0x 071d2911. |
| inside order of the bits is: [0] P1 divider[0] (reset value 1); [1] P1 |
| divider[1] (reset value 0); [2] P1 divider[2] (reset value 0); [3] P1 |
| divider[3] (reset value 0); [4] P2 divider[0] (reset value 1); [5] P2 |
| divider[1] (reset value 0); [6] P2 divider[2] (reset value 0); [7] P2 |
| divider[3] (reset value 0); [8] ph_det_dis (reset value 1); [9] |
| freq_det_dis (reset value 0); [10] Icpx[0] (reset value 0); [11] Icpx[1] |
| (reset value 1); [12] Icpx[2] (reset value 0); [13] Icpx[3] (reset value |
| 1); [14] Icpx[4] (reset value 0); [15] Icpx[5] (reset value 0); [16] |
| Rx[0] (reset value 1); [17] Rx[1] (reset value 0); [18] vc_en (reset |
| value 1); [19] vco_rng[0] (reset value 1); [20] vco_rng[1] (reset value |
| 1); [21] Kvco_xf[0] (reset value 0); [22] Kvco_xf[1] (reset value 0); |
| [23] Kvco_xf[2] (reset value 0); [24] Kvco_xs[0] (reset value 1); [25] |
| Kvco_xs[1] (reset value 1); [26] Kvco_xs[2] (reset value 1); [27] |
| testd_en (reset value 0); [28] testd_sel[0] (reset value 0); [29] |
| testd_sel[1] (reset value 0); [30] testd_sel[2] (reset value 0); [31] |
| testa_en (reset value 0); */ |
| #define MISC_REG_PLL_STORM_CTRL_1 0xa294 |
| #define MISC_REG_PLL_STORM_CTRL_2 0xa298 |
| #define MISC_REG_PLL_STORM_CTRL_3 0xa29c |
| #define MISC_REG_PLL_STORM_CTRL_4 0xa2a0 |
| /* [R 1] Status of 4 port mode enable input pin. */ |
| #define MISC_REG_PORT4MODE_EN 0xa750 |
| /* [RW 2] 4 port mode enable overwrite.[0] - Overwrite control; if it is 0 - |
| * the port4mode_en output is equal to 4 port mode input pin; if it is 1 - |
| * the port4mode_en output is equal to bit[1] of this register; [1] - |
| * Overwrite value. If bit[0] of this register is 1 this is the value that |
| * receives the port4mode_en output . */ |
| #define MISC_REG_PORT4MODE_EN_OVWR 0xa720 |
| /* [RW 32] reset reg#2; rite/read one = the specific block is out of reset; |
| write/read zero = the specific block is in reset; addr 0-wr- the write |
| value will be written to the register; addr 1-set - one will be written |
| to all the bits that have the value of one in the data written (bits that |
| have the value of zero will not be change) ; addr 2-clear - zero will be |
| written to all the bits that have the value of one in the data written |
| (bits that have the value of zero will not be change); addr 3-ignore; |
| read ignore from all addr except addr 00; inside order of the bits is: |
| [0] rst_bmac0; [1] rst_bmac1; [2] rst_emac0; [3] rst_emac1; [4] rst_grc; |
| [5] rst_mcp_n_reset_reg_hard_core; [6] rst_ mcp_n_hard_core_rst_b; [7] |
| rst_ mcp_n_reset_cmn_cpu; [8] rst_ mcp_n_reset_cmn_core; [9] rst_rbcn; |
| [10] rst_dbg; [11] rst_misc_core; [12] rst_dbue (UART); [13] |
| Pci_resetmdio_n; [14] rst_emac0_hard_core; [15] rst_emac1_hard_core; 16] |
| rst_pxp_rq_rd_wr; 31:17] reserved */ |
| #define MISC_REG_RESET_REG_1 0xa580 |
| #define MISC_REG_RESET_REG_2 0xa590 |
| /* [RW 20] 20 bit GRC address where the scratch-pad of the MCP that is |
| shared with the driver resides */ |
| #define MISC_REG_SHARED_MEM_ADDR 0xa2b4 |
| /* [RW 32] SPIO. [31-24] FLOAT When any of these bits is written as a '1'; |
| the corresponding SPIO bit will turn off it's drivers and become an |
| input. This is the reset state of all SPIO pins. The read value of these |
| bits will be a '1' if that last command (#SET; #CL; or #FLOAT) for this |
| bit was a #FLOAT. (reset value 0xff). [23-16] CLR When any of these bits |
| is written as a '1'; the corresponding SPIO bit will drive low. The read |
| value of these bits will be a '1' if that last command (#SET; #CLR; or |
| #FLOAT) for this bit was a #CLR. (reset value 0). [15-8] SET When any of |
| these bits is written as a '1'; the corresponding SPIO bit will drive |
| high (if it has that capability). The read value of these bits will be a |
| '1' if that last command (#SET; #CLR; or #FLOAT) for this bit was a #SET. |
| (reset value 0). [7-0] VALUE RO; These bits indicate the read value of |
| each of the eight SPIO pins. This is the result value of the pin; not the |
| drive value. Writing these bits will have not effect. Each 8 bits field |
| is divided as follows: [0] VAUX Enable; when pulsed low; enables supply |
| from VAUX. (This is an output pin only; the FLOAT field is not applicable |
| for this pin); [1] VAUX Disable; when pulsed low; disables supply form |
| VAUX. (This is an output pin only; FLOAT field is not applicable for this |
| pin); [2] SEL_VAUX_B - Control to power switching logic. Drive low to |
| select VAUX supply. (This is an output pin only; it is not controlled by |
| the SET and CLR fields; it is controlled by the Main Power SM; the FLOAT |
| field is not applicable for this pin; only the VALUE fields is relevant - |
| it reflects the output value); [3] port swap [4] spio_4; [5] spio_5; [6] |
| Bit 0 of UMP device ID select; read by UMP firmware; [7] Bit 1 of UMP |
| device ID select; read by UMP firmware. */ |
| #define MISC_REG_SPIO 0xa4fc |
| /* [RW 8] These bits enable the SPIO_INTs to signals event to the IGU/MC. |
| according to the following map: [3:0] reserved; [4] spio_4 [5] spio_5; |
| [7:0] reserved */ |
| #define MISC_REG_SPIO_EVENT_EN 0xa2b8 |
| /* [RW 32] SPIO INT. [31-24] OLD_CLR Writing a '1' to these bit clears the |
| corresponding bit in the #OLD_VALUE register. This will acknowledge an |
| interrupt on the falling edge of corresponding SPIO input (reset value |
| 0). [23-16] OLD_SET Writing a '1' to these bit sets the corresponding bit |
| in the #OLD_VALUE register. This will acknowledge an interrupt on the |
| rising edge of corresponding SPIO input (reset value 0). [15-8] OLD_VALUE |
| RO; These bits indicate the old value of the SPIO input value. When the |
| ~INT_STATE bit is set; this bit indicates the OLD value of the pin such |
| that if ~INT_STATE is set and this bit is '0'; then the interrupt is due |
| to a low to high edge. If ~INT_STATE is set and this bit is '1'; then the |
| interrupt is due to a high to low edge (reset value 0). [7-0] INT_STATE |
| RO; These bits indicate the current SPIO interrupt state for each SPIO |
| pin. This bit is cleared when the appropriate #OLD_SET or #OLD_CLR |
| command bit is written. This bit is set when the SPIO input does not |
| match the current value in #OLD_VALUE (reset value 0). */ |
| #define MISC_REG_SPIO_INT 0xa500 |
| /* [RW 32] reload value for counter 4 if reload; the value will be reload if |
| the counter reached zero and the reload bit |
| (~misc_registers_sw_timer_cfg_4.sw_timer_cfg_4[1] ) is set */ |
| #define MISC_REG_SW_TIMER_RELOAD_VAL_4 0xa2fc |
| /* [RW 32] the value of the counter for sw timers1-8. there are 8 addresses |
| in this register. address 0 - timer 1; address 1 - timer 2, ... address 7 - |
| timer 8 */ |
| #define MISC_REG_SW_TIMER_VAL 0xa5c0 |
| /* [R 1] Status of two port mode path swap input pin. */ |
| #define MISC_REG_TWO_PORT_PATH_SWAP 0xa758 |
| /* [RW 2] 2 port swap overwrite.[0] - Overwrite control; if it is 0 - the |
| path_swap output is equal to 2 port mode path swap input pin; if it is 1 |
| - the path_swap output is equal to bit[1] of this register; [1] - |
| Overwrite value. If bit[0] of this register is 1 this is the value that |
| receives the path_swap output. Reset on Hard reset. */ |
| #define MISC_REG_TWO_PORT_PATH_SWAP_OVWR 0xa72c |
| /* [RW 1] Set by the MCP to remember if one or more of the drivers is/are |
| loaded; 0-prepare; -unprepare */ |
| #define MISC_REG_UNPREPARED 0xa424 |
| #define NIG_LLH0_BRB1_DRV_MASK_REG_LLH0_BRB1_DRV_MASK_BRCST (0x1<<0) |
| #define NIG_LLH0_BRB1_DRV_MASK_REG_LLH0_BRB1_DRV_MASK_MLCST (0x1<<1) |
| #define NIG_LLH0_BRB1_DRV_MASK_REG_LLH0_BRB1_DRV_MASK_NO_VLAN (0x1<<4) |
| #define NIG_LLH0_BRB1_DRV_MASK_REG_LLH0_BRB1_DRV_MASK_UNCST (0x1<<2) |
| #define NIG_LLH0_BRB1_DRV_MASK_REG_LLH0_BRB1_DRV_MASK_VLAN (0x1<<3) |
| /* [RW 5] MDIO PHY Address. The WC uses this address to determine whether or |
| * not it is the recipient of the message on the MDIO interface. The value |
| * is compared to the value on ctrl_md_devad. Drives output |
| * misc_xgxs0_phy_addr. Global register. */ |
| #define MISC_REG_WC0_CTRL_PHY_ADDR 0xa9cc |
| #define MISC_REG_WC0_RESET 0xac30 |
| /* [RW 2] XMAC Core port mode. Indicates the number of ports on the system |
| side. This should be less than or equal to phy_port_mode; if some of the |
| ports are not used. This enables reduction of frequency on the core side. |
| This is a strap input for the XMAC_MP core. 00 - Single Port Mode; 01 - |
| Dual Port Mode; 10 - Tri Port Mode; 11 - Quad Port Mode. This is a strap |
| input for the XMAC_MP core; and should be changed only while reset is |
| held low. Reset on Hard reset. */ |
| #define MISC_REG_XMAC_CORE_PORT_MODE 0xa964 |
| /* [RW 2] XMAC PHY port mode. Indicates the number of ports on the Warp |
| Core. This is a strap input for the XMAC_MP core. 00 - Single Port Mode; |
| 01 - Dual Port Mode; 1x - Quad Port Mode; This is a strap input for the |
| XMAC_MP core; and should be changed only while reset is held low. Reset |
| on Hard reset. */ |
| #define MISC_REG_XMAC_PHY_PORT_MODE 0xa960 |
| /* [RW 32] 1 [47] Packet Size = 64 Write to this register write bits 31:0. |
| * Reads from this register will clear bits 31:0. */ |
| #define MSTAT_REG_RX_STAT_GR64_LO 0x200 |
| /* [RW 32] 1 [00] Tx Good Packet Count Write to this register write bits |
| * 31:0. Reads from this register will clear bits 31:0. */ |
| #define MSTAT_REG_TX_STAT_GTXPOK_LO 0 |
| #define NIG_LLH0_BRB1_DRV_MASK_REG_LLH0_BRB1_DRV_MASK_BRCST (0x1<<0) |
| #define NIG_LLH0_BRB1_DRV_MASK_REG_LLH0_BRB1_DRV_MASK_MLCST (0x1<<1) |
| #define NIG_LLH0_BRB1_DRV_MASK_REG_LLH0_BRB1_DRV_MASK_NO_VLAN (0x1<<4) |
| #define NIG_LLH0_BRB1_DRV_MASK_REG_LLH0_BRB1_DRV_MASK_UNCST (0x1<<2) |
| #define NIG_LLH0_BRB1_DRV_MASK_REG_LLH0_BRB1_DRV_MASK_VLAN (0x1<<3) |
| #define NIG_LLH0_XCM_MASK_REG_LLH0_XCM_MASK_BCN (0x1<<0) |
| #define NIG_LLH1_XCM_MASK_REG_LLH1_XCM_MASK_BCN (0x1<<0) |
| #define NIG_MASK_INTERRUPT_PORT0_REG_MASK_EMAC0_MISC_MI_INT (0x1<<0) |
| #define NIG_MASK_INTERRUPT_PORT0_REG_MASK_SERDES0_LINK_STATUS (0x1<<9) |
| #define NIG_MASK_INTERRUPT_PORT0_REG_MASK_XGXS0_LINK10G (0x1<<15) |
| #define NIG_MASK_INTERRUPT_PORT0_REG_MASK_XGXS0_LINK_STATUS (0xf<<18) |
| /* [RW 1] Input enable for RX_BMAC0 IF */ |
| #define NIG_REG_BMAC0_IN_EN 0x100ac |
| /* [RW 1] output enable for TX_BMAC0 IF */ |
| #define NIG_REG_BMAC0_OUT_EN 0x100e0 |
| /* [RW 1] output enable for TX BMAC pause port 0 IF */ |
| #define NIG_REG_BMAC0_PAUSE_OUT_EN 0x10110 |
| /* [RW 1] output enable for RX_BMAC0_REGS IF */ |
| #define NIG_REG_BMAC0_REGS_OUT_EN 0x100e8 |
| /* [RW 1] output enable for RX BRB1 port0 IF */ |
| #define NIG_REG_BRB0_OUT_EN 0x100f8 |
| /* [RW 1] Input enable for TX BRB1 pause port 0 IF */ |
| #define NIG_REG_BRB0_PAUSE_IN_EN 0x100c4 |
| /* [RW 1] output enable for RX BRB1 port1 IF */ |
| #define NIG_REG_BRB1_OUT_EN 0x100fc |
| /* [RW 1] Input enable for TX BRB1 pause port 1 IF */ |
| #define NIG_REG_BRB1_PAUSE_IN_EN 0x100c8 |
| /* [RW 1] output enable for RX BRB1 LP IF */ |
| #define NIG_REG_BRB_LB_OUT_EN 0x10100 |
| /* [WB_W 82] Debug packet to LP from RBC; Data spelling:[63:0] data; 64] |
| error; [67:65]eop_bvalid; [68]eop; [69]sop; [70]port_id; 71]flush; |
| 72:73]-vnic_num; 81:74]-sideband_info */ |
| #define NIG_REG_DEBUG_PACKET_LB 0x10800 |
| /* [RW 1] Input enable for TX Debug packet */ |
| #define NIG_REG_EGRESS_DEBUG_IN_EN 0x100dc |
| /* [RW 1] If 1 - egress drain mode for port0 is active. In this mode all |
| packets from PBFare not forwarded to the MAC and just deleted from FIFO. |
| First packet may be deleted from the middle. And last packet will be |
| always deleted till the end. */ |
| #define NIG_REG_EGRESS_DRAIN0_MODE 0x10060 |
| /* [RW 1] Output enable to EMAC0 */ |
| #define NIG_REG_EGRESS_EMAC0_OUT_EN 0x10120 |
| /* [RW 1] MAC configuration for packets of port0. If 1 - all packet outputs |
| to emac for port0; other way to bmac for port0 */ |
| #define NIG_REG_EGRESS_EMAC0_PORT 0x10058 |
| /* [RW 1] Input enable for TX PBF user packet port0 IF */ |
| #define NIG_REG_EGRESS_PBF0_IN_EN 0x100cc |
| /* [RW 1] Input enable for TX PBF user packet port1 IF */ |
| #define NIG_REG_EGRESS_PBF1_IN_EN 0x100d0 |
| /* [RW 1] Input enable for TX UMP management packet port0 IF */ |
| #define NIG_REG_EGRESS_UMP0_IN_EN 0x100d4 |
| /* [RW 1] Input enable for RX_EMAC0 IF */ |
| #define NIG_REG_EMAC0_IN_EN 0x100a4 |
| /* [RW 1] output enable for TX EMAC pause port 0 IF */ |
| #define NIG_REG_EMAC0_PAUSE_OUT_EN 0x10118 |
| /* [R 1] status from emac0. This bit is set when MDINT from either the |
| EXT_MDINT pin or from the Copper PHY is driven low. This condition must |
| be cleared in the attached PHY device that is driving the MINT pin. */ |
| #define NIG_REG_EMAC0_STATUS_MISC_MI_INT 0x10494 |
| /* [WB 48] This address space contains BMAC0 registers. The BMAC registers |
| are described in appendix A. In order to access the BMAC0 registers; the |
| base address; NIG_REGISTERS_INGRESS_BMAC0_MEM; Offset: 0x10c00; should be |
| added to each BMAC register offset */ |
| #define NIG_REG_INGRESS_BMAC0_MEM 0x10c00 |
| /* [WB 48] This address space contains BMAC1 registers. The BMAC registers |
| are described in appendix A. In order to access the BMAC0 registers; the |
| base address; NIG_REGISTERS_INGRESS_BMAC1_MEM; Offset: 0x11000; should be |
| added to each BMAC register offset */ |
| #define NIG_REG_INGRESS_BMAC1_MEM 0x11000 |
| /* [R 1] FIFO empty in EOP descriptor FIFO of LP in NIG_RX_EOP */ |
| #define NIG_REG_INGRESS_EOP_LB_EMPTY 0x104e0 |
| /* [RW 17] Debug only. RX_EOP_DSCR_lb_FIFO in NIG_RX_EOP. Data |
| packet_length[13:0]; mac_error[14]; trunc_error[15]; parity[16] */ |
| #define NIG_REG_INGRESS_EOP_LB_FIFO 0x104e4 |
| /* [RW 27] 0 - must be active for Everest A0; 1- for Everest B0 when latch |
| logic for interrupts must be used. Enable per bit of interrupt of |
| ~latch_status.latch_status */ |
| #define NIG_REG_LATCH_BC_0 0x16210 |
| /* [RW 27] Latch for each interrupt from Unicore.b[0] |
| status_emac0_misc_mi_int; b[1] status_emac0_misc_mi_complete; |
| b[2]status_emac0_misc_cfg_change; b[3]status_emac0_misc_link_status; |
| b[4]status_emac0_misc_link_change; b[5]status_emac0_misc_attn; |
| b[6]status_serdes0_mac_crs; b[7]status_serdes0_autoneg_complete; |
| b[8]status_serdes0_fiber_rxact; b[9]status_serdes0_link_status; |
| b[10]status_serdes0_mr_page_rx; b[11]status_serdes0_cl73_an_complete; |
| b[12]status_serdes0_cl73_mr_page_rx; b[13]status_serdes0_rx_sigdet; |
| b[14]status_xgxs0_remotemdioreq; b[15]status_xgxs0_link10g; |
| b[16]status_xgxs0_autoneg_complete; b[17]status_xgxs0_fiber_rxact; |
| b[21:18]status_xgxs0_link_status; b[22]status_xgxs0_mr_page_rx; |
| b[23]status_xgxs0_cl73_an_complete; b[24]status_xgxs0_cl73_mr_page_rx; |
| b[25]status_xgxs0_rx_sigdet; b[26]status_xgxs0_mac_crs */ |
| #define NIG_REG_LATCH_STATUS_0 0x18000 |
| /* [RW 1] led 10g for port 0 */ |
| #define NIG_REG_LED_10G_P0 0x10320 |
| /* [RW 1] led 10g for port 1 */ |
| #define NIG_REG_LED_10G_P1 0x10324 |
| /* [RW 1] Port0: This bit is set to enable the use of the |
| ~nig_registers_led_control_blink_rate_p0.led_control_blink_rate_p0 field |
| defined below. If this bit is cleared; then the blink rate will be about |
| 8Hz. */ |
| #define NIG_REG_LED_CONTROL_BLINK_RATE_ENA_P0 0x10318 |
| /* [RW 12] Port0: Specifies the period of each blink cycle (on + off) for |
| Traffic LED in milliseconds. Must be a non-zero value. This 12-bit field |
| is reset to 0x080; giving a default blink period of approximately 8Hz. */ |
| #define NIG_REG_LED_CONTROL_BLINK_RATE_P0 0x10310 |
| /* [RW 1] Port0: If set along with the |
| ~nig_registers_led_control_override_traffic_p0.led_control_override_traffic_p0 |
| bit and ~nig_registers_led_control_traffic_p0.led_control_traffic_p0 LED |
| bit; the Traffic LED will blink with the blink rate specified in |
| ~nig_registers_led_control_blink_rate_p0.led_control_blink_rate_p0 and |
| ~nig_registers_led_control_blink_rate_ena_p0.led_control_blink_rate_ena_p0 |
| fields. */ |
| #define NIG_REG_LED_CONTROL_BLINK_TRAFFIC_P0 0x10308 |
| /* [RW 1] Port0: If set overrides hardware control of the Traffic LED. The |
| Traffic LED will then be controlled via bit ~nig_registers_ |
| led_control_traffic_p0.led_control_traffic_p0 and bit |
| ~nig_registers_led_control_blink_traffic_p0.led_control_blink_traffic_p0 */ |
| #define NIG_REG_LED_CONTROL_OVERRIDE_TRAFFIC_P0 0x102f8 |
| /* [RW 1] Port0: If set along with the led_control_override_trafic_p0 bit; |
| turns on the Traffic LED. If the led_control_blink_traffic_p0 bit is also |
| set; the LED will blink with blink rate specified in |
| ~nig_registers_led_control_blink_rate_p0.led_control_blink_rate_p0 and |
| ~nig_regsters_led_control_blink_rate_ena_p0.led_control_blink_rate_ena_p0 |
| fields. */ |
| #define NIG_REG_LED_CONTROL_TRAFFIC_P0 0x10300 |
| /* [RW 4] led mode for port0: 0 MAC; 1-3 PHY1; 4 MAC2; 5-7 PHY4; 8-MAC3; |
| 9-11PHY7; 12 MAC4; 13-15 PHY10; */ |
| #define NIG_REG_LED_MODE_P0 0x102f0 |
| /* [RW 3] for port0 enable for llfc ppp and pause. b0 - brb1 enable; b1- |
| tsdm enable; b2- usdm enable */ |
| #define NIG_REG_LLFC_EGRESS_SRC_ENABLE_0 0x16070 |
| #define NIG_REG_LLFC_EGRESS_SRC_ENABLE_1 0x16074 |
| /* [RW 1] SAFC enable for port0. This register may get 1 only when |
| ~ppp_enable.ppp_enable = 0 and pause_enable.pause_enable =0 for the same |
| port */ |
| #define NIG_REG_LLFC_ENABLE_0 0x16208 |
| #define NIG_REG_LLFC_ENABLE_1 0x1620c |
| /* [RW 16] classes are high-priority for port0 */ |
| #define NIG_REG_LLFC_HIGH_PRIORITY_CLASSES_0 0x16058 |
| #define NIG_REG_LLFC_HIGH_PRIORITY_CLASSES_1 0x1605c |
| /* [RW 16] classes are low-priority for port0 */ |
| #define NIG_REG_LLFC_LOW_PRIORITY_CLASSES_0 0x16060 |
| #define NIG_REG_LLFC_LOW_PRIORITY_CLASSES_1 0x16064 |
| /* [RW 1] Output enable of message to LLFC BMAC IF for port0 */ |
| #define NIG_REG_LLFC_OUT_EN_0 0x160c8 |
| #define NIG_REG_LLFC_OUT_EN_1 0x160cc |
| #define NIG_REG_LLH0_ACPI_PAT_0_CRC 0x1015c |
| #define NIG_REG_LLH0_ACPI_PAT_6_LEN 0x10154 |
| #define NIG_REG_LLH0_BRB1_DRV_MASK 0x10244 |
| #define NIG_REG_LLH0_BRB1_DRV_MASK_MF 0x16048 |
| /* [RW 1] send to BRB1 if no match on any of RMP rules. */ |
| #define NIG_REG_LLH0_BRB1_NOT_MCP 0x1025c |
| /* [RW 2] Determine the classification participants. 0: no classification.1: |
| classification upon VLAN id. 2: classification upon MAC address. 3: |
| classification upon both VLAN id & MAC addr. */ |
| #define NIG_REG_LLH0_CLS_TYPE 0x16080 |
| /* [RW 32] cm header for llh0 */ |
| #define NIG_REG_LLH0_CM_HEADER 0x1007c |
| #define NIG_REG_LLH0_DEST_IP_0_1 0x101dc |
| #define NIG_REG_LLH0_DEST_MAC_0_0 0x101c0 |
| /* [RW 16] destination TCP address 1. The LLH will look for this address in |
| all incoming packets. */ |
| #define NIG_REG_LLH0_DEST_TCP_0 0x10220 |
| /* [RW 16] destination UDP address 1 The LLH will look for this address in |
| all incoming packets. */ |
| #define NIG_REG_LLH0_DEST_UDP_0 0x10214 |
| #define NIG_REG_LLH0_ERROR_MASK 0x1008c |
| /* [RW 8] event id for llh0 */ |
| #define NIG_REG_LLH0_EVENT_ID 0x10084 |
| #define NIG_REG_LLH0_FUNC_EN 0x160fc |
| #define NIG_REG_LLH0_FUNC_MEM 0x16180 |
| #define NIG_REG_LLH0_FUNC_MEM_ENABLE 0x16140 |
| #define NIG_REG_LLH0_FUNC_VLAN_ID 0x16100 |
| /* [RW 1] Determine the IP version to look for in |
| ~nig_registers_llh0_dest_ip_0.llh0_dest_ip_0. 0 - IPv6; 1-IPv4 */ |
| #define NIG_REG_LLH0_IPV4_IPV6_0 0x10208 |
| /* [RW 1] t bit for llh0 */ |
| #define NIG_REG_LLH0_T_BIT 0x10074 |
| /* [RW 12] VLAN ID 1. In case of VLAN packet the LLH will look for this ID. */ |
| #define NIG_REG_LLH0_VLAN_ID_0 0x1022c |
| /* [RW 8] init credit counter for port0 in LLH */ |
| #define NIG_REG_LLH0_XCM_INIT_CREDIT 0x10554 |
| #define NIG_REG_LLH0_XCM_MASK 0x10130 |
| #define NIG_REG_LLH1_BRB1_DRV_MASK 0x10248 |
| /* [RW 1] send to BRB1 if no match on any of RMP rules. */ |
| #define NIG_REG_LLH1_BRB1_NOT_MCP 0x102dc |
| /* [RW 2] Determine the classification participants. 0: no classification.1: |
| classification upon VLAN id. 2: classification upon MAC address. 3: |
| classification upon both VLAN id & MAC addr. */ |
| #define NIG_REG_LLH1_CLS_TYPE 0x16084 |
| /* [RW 32] cm header for llh1 */ |
| #define NIG_REG_LLH1_CM_HEADER 0x10080 |
| #define NIG_REG_LLH1_ERROR_MASK 0x10090 |
| /* [RW 8] event id for llh1 */ |
| #define NIG_REG_LLH1_EVENT_ID 0x10088 |
| #define NIG_REG_LLH1_FUNC_MEM 0x161c0 |
| #define NIG_REG_LLH1_FUNC_MEM_ENABLE 0x16160 |
| #define NIG_REG_LLH1_FUNC_MEM_SIZE 16 |
| /* [RW 1] When this bit is set; the LLH will classify the packet before |
| * sending it to the BRB or calculating WoL on it. This bit controls port 1 |
| * only. The legacy llh_multi_function_mode bit controls port 0. */ |
| #define NIG_REG_LLH1_MF_MODE 0x18614 |
| /* [RW 8] init credit counter for port1 in LLH */ |
| #define NIG_REG_LLH1_XCM_INIT_CREDIT 0x10564 |
| #define NIG_REG_LLH1_XCM_MASK 0x10134 |
| /* [RW 1] When this bit is set; the LLH will expect all packets to be with |
| e1hov */ |
| #define NIG_REG_LLH_E1HOV_MODE 0x160d8 |
| /* [RW 1] When this bit is set; the LLH will classify the packet before |
| sending it to the BRB or calculating WoL on it. */ |
| #define NIG_REG_LLH_MF_MODE 0x16024 |
| #define NIG_REG_MASK_INTERRUPT_PORT0 0x10330 |
| #define NIG_REG_MASK_INTERRUPT_PORT1 0x10334 |
| /* [RW 1] Output signal from NIG to EMAC0. When set enables the EMAC0 block. */ |
| #define NIG_REG_NIG_EMAC0_EN 0x1003c |
| /* [RW 1] Output signal from NIG to EMAC1. When set enables the EMAC1 block. */ |
| #define NIG_REG_NIG_EMAC1_EN 0x10040 |
| /* [RW 1] Output signal from NIG to TX_EMAC0. When set indicates to the |
| EMAC0 to strip the CRC from the ingress packets. */ |
| #define NIG_REG_NIG_INGRESS_EMAC0_NO_CRC 0x10044 |
| /* [R 32] Interrupt register #0 read */ |
| #define NIG_REG_NIG_INT_STS_0 0x103b0 |
| #define NIG_REG_NIG_INT_STS_1 0x103c0 |
| /* [R 32] Legacy E1 and E1H location for parity error mask register. */ |
| #define NIG_REG_NIG_PRTY_MASK 0x103dc |
| /* [RW 32] Parity mask register #0 read/write */ |
| #define NIG_REG_NIG_PRTY_MASK_0 0x183c8 |
| #define NIG_REG_NIG_PRTY_MASK_1 0x183d8 |
| /* [R 32] Legacy E1 and E1H location for parity error status register. */ |
| #define NIG_REG_NIG_PRTY_STS 0x103d0 |
| /* [R 32] Parity register #0 read */ |
| #define NIG_REG_NIG_PRTY_STS_0 0x183bc |
| #define NIG_REG_NIG_PRTY_STS_1 0x183cc |
| /* [R 32] Legacy E1 and E1H location for parity error status clear register. */ |
| #define NIG_REG_NIG_PRTY_STS_CLR 0x103d4 |
| /* [RC 32] Parity register #0 read clear */ |
| #define NIG_REG_NIG_PRTY_STS_CLR_0 0x183c0 |
| #define NIG_REG_NIG_PRTY_STS_CLR_1 0x183d0 |
| #define MCPR_IMC_COMMAND_ENABLE (1L<<31) |
| #define MCPR_IMC_COMMAND_IMC_STATUS_BITSHIFT 16 |
| #define MCPR_IMC_COMMAND_OPERATION_BITSHIFT 28 |
| #define MCPR_IMC_COMMAND_TRANSFER_ADDRESS_BITSHIFT 8 |
| /* [RW 6] Bit-map indicating which L2 hdrs may appear after the basic |
| * Ethernet header. */ |
| #define NIG_REG_P0_HDRS_AFTER_BASIC 0x18038 |
| /* [RW 1] HW PFC enable bit. Set this bit to enable the PFC functionality in |
| * the NIG. Other flow control modes such as PAUSE and SAFC/LLFC should be |
| * disabled when this bit is set. */ |
| #define NIG_REG_P0_HWPFC_ENABLE 0x18078 |
| #define NIG_REG_P0_LLH_FUNC_MEM2 0x18480 |
| #define NIG_REG_P0_LLH_FUNC_MEM2_ENABLE 0x18440 |
| /* [RW 1] Input enable for RX MAC interface. */ |
| #define NIG_REG_P0_MAC_IN_EN 0x185ac |
| /* [RW 1] Output enable for TX MAC interface */ |
| #define NIG_REG_P0_MAC_OUT_EN 0x185b0 |
| /* [RW 1] Output enable for TX PAUSE signal to the MAC. */ |
| #define NIG_REG_P0_MAC_PAUSE_OUT_EN 0x185b4 |
| /* [RW 32] Eight 4-bit configurations for specifying which COS (0-15 for |
| * future expansion) each priorty is to be mapped to. Bits 3:0 specify the |
| * COS for priority 0. Bits 31:28 specify the COS for priority 7. The 3-bit |
| * priority field is extracted from the outer-most VLAN in receive packet. |
| * Only COS 0 and COS 1 are supported in E2. */ |
| #define NIG_REG_P0_PKT_PRIORITY_TO_COS 0x18054 |
| /* [RW 16] Bit-map indicating which SAFC/PFC priorities to map to COS 0. A |
| * priority is mapped to COS 0 when the corresponding mask bit is 1. More |
| * than one bit may be set; allowing multiple priorities to be mapped to one |
| * COS. */ |
| #define NIG_REG_P0_RX_COS0_PRIORITY_MASK 0x18058 |
| /* [RW 16] Bit-map indicating which SAFC/PFC priorities to map to COS 1. A |
| * priority is mapped to COS 1 when the corresponding mask bit is 1. More |
| * than one bit may be set; allowing multiple priorities to be mapped to one |
| * COS. */ |
| #define NIG_REG_P0_RX_COS1_PRIORITY_MASK 0x1805c |
| /* [RW 16] Bit-map indicating which SAFC/PFC priorities to map to COS 2. A |
| * priority is mapped to COS 2 when the corresponding mask bit is 1. More |
| * than one bit may be set; allowing multiple priorities to be mapped to one |
| * COS. */ |
| #define NIG_REG_P0_RX_COS2_PRIORITY_MASK 0x186b0 |
| /* [RW 16] Bit-map indicating which SAFC/PFC priorities to map to COS 3. A |
| * priority is mapped to COS 3 when the corresponding mask bit is 1. More |
| * than one bit may be set; allowing multiple priorities to be mapped to one |
| * COS. */ |
| #define NIG_REG_P0_RX_COS3_PRIORITY_MASK 0x186b4 |
| /* [RW 16] Bit-map indicating which SAFC/PFC priorities to map to COS 4. A |
| * priority is mapped to COS 4 when the corresponding mask bit is 1. More |
| * than one bit may be set; allowing multiple priorities to be mapped to one |
| * COS. */ |
| #define NIG_REG_P0_RX_COS4_PRIORITY_MASK 0x186b8 |
| /* [RW 16] Bit-map indicating which SAFC/PFC priorities to map to COS 5. A |
| * priority is mapped to COS 5 when the corresponding mask bit is 1. More |
| * than one bit may be set; allowing multiple priorities to be mapped to one |
| * COS. */ |
| #define NIG_REG_P0_RX_COS5_PRIORITY_MASK 0x186bc |
| /* [R 1] RX FIFO for receiving data from MAC is empty. */ |
| /* [RW 15] Specify which of the credit registers the client is to be mapped |
| * to. Bits[2:0] are for client 0; bits [14:12] are for client 4. For |
| * clients that are not subject to WFQ credit blocking - their |
| * specifications here are not used. */ |
| #define NIG_REG_P0_TX_ARB_CLIENT_CREDIT_MAP 0x180f0 |
| /* [RW 32] Specify which of the credit registers the client is to be mapped |
| * to. This register specifies bits 31:0 of the 36-bit value. Bits[3:0] are |
| * for client 0; bits [35:32] are for client 8. For clients that are not |
| * subject to WFQ credit blocking - their specifications here are not used. |
| * This is a new register (with 2_) added in E3 B0 to accommodate the 9 |
| * input clients to ETS arbiter. The reset default is set for management and |
| * debug to use credit registers 6, 7, and 8, respectively, and COSes 0-5 to |
| * use credit registers 0-5 respectively (0x543210876). Note that credit |
| * registers can not be shared between clients. */ |
| #define NIG_REG_P0_TX_ARB_CLIENT_CREDIT_MAP2_LSB 0x18688 |
| /* [RW 4] Specify which of the credit registers the client is to be mapped |
| * to. This register specifies bits 35:32 of the 36-bit value. Bits[3:0] are |
| * for client 0; bits [35:32] are for client 8. For clients that are not |
| * subject to WFQ credit blocking - their specifications here are not used. |
| * This is a new register (with 2_) added in E3 B0 to accommodate the 9 |
| * input clients to ETS arbiter. The reset default is set for management and |
| * debug to use credit registers 6, 7, and 8, respectively, and COSes 0-5 to |
| * use credit registers 0-5 respectively (0x543210876). Note that credit |
| * registers can not be shared between clients. */ |
| #define NIG_REG_P0_TX_ARB_CLIENT_CREDIT_MAP2_MSB 0x1868c |
| /* [RW 5] Specify whether the client competes directly in the strict |
| * priority arbiter. The bits are mapped according to client ID (client IDs |
| * are defined in tx_arb_priority_client). Default value is set to enable |
| * strict priorities for clients 0-2 -- management and debug traffic. */ |
| #define NIG_REG_P0_TX_ARB_CLIENT_IS_STRICT 0x180e8 |
| /* [RW 5] Specify whether the client is subject to WFQ credit blocking. The |
| * bits are mapped according to client ID (client IDs are defined in |
| * tx_arb_priority_client). Default value is 0 for not using WFQ credit |
| * blocking. */ |
| #define NIG_REG_P0_TX_ARB_CLIENT_IS_SUBJECT2WFQ 0x180ec |
| /* [RW 32] Specify the upper bound that credit register 0 is allowed to |
| * reach. */ |
| #define NIG_REG_P0_TX_ARB_CREDIT_UPPER_BOUND_0 0x1810c |
| #define NIG_REG_P0_TX_ARB_CREDIT_UPPER_BOUND_1 0x18110 |
| #define NIG_REG_P0_TX_ARB_CREDIT_UPPER_BOUND_2 0x18114 |
| #define NIG_REG_P0_TX_ARB_CREDIT_UPPER_BOUND_3 0x18118 |
| #define NIG_REG_P0_TX_ARB_CREDIT_UPPER_BOUND_4 0x1811c |
| #define NIG_REG_P0_TX_ARB_CREDIT_UPPER_BOUND_5 0x186a0 |
| #define NIG_REG_P0_TX_ARB_CREDIT_UPPER_BOUND_6 0x186a4 |
| #define NIG_REG_P0_TX_ARB_CREDIT_UPPER_BOUND_7 0x186a8 |
| #define NIG_REG_P0_TX_ARB_CREDIT_UPPER_BOUND_8 0x186ac |
| /* [RW 32] Specify the weight (in bytes) to be added to credit register 0 |
| * when it is time to increment. */ |
| #define NIG_REG_P0_TX_ARB_CREDIT_WEIGHT_0 0x180f8 |
| #define NIG_REG_P0_TX_ARB_CREDIT_WEIGHT_1 0x180fc |
| #define NIG_REG_P0_TX_ARB_CREDIT_WEIGHT_2 0x18100 |
| #define NIG_REG_P0_TX_ARB_CREDIT_WEIGHT_3 0x18104 |
| #define NIG_REG_P0_TX_ARB_CREDIT_WEIGHT_4 0x18108 |
| #define NIG_REG_P0_TX_ARB_CREDIT_WEIGHT_5 0x18690 |
| #define NIG_REG_P0_TX_ARB_CREDIT_WEIGHT_6 0x18694 |
| #define NIG_REG_P0_TX_ARB_CREDIT_WEIGHT_7 0x18698 |
| #define NIG_REG_P0_TX_ARB_CREDIT_WEIGHT_8 0x1869c |
| /* [RW 12] Specify the number of strict priority arbitration slots between |
| * two round-robin arbitration slots to avoid starvation. A value of 0 means |
| * no strict priority cycles - the strict priority with anti-starvation |
| * arbiter becomes a round-robin arbiter. */ |
| #define NIG_REG_P0_TX_ARB_NUM_STRICT_ARB_SLOTS 0x180f4 |
| /* [RW 15] Specify the client number to be assigned to each priority of the |
| * strict priority arbiter. Priority 0 is the highest priority. Bits [2:0] |
| * are for priority 0 client; bits [14:12] are for priority 4 client. The |
| * clients are assigned the following IDs: 0-management; 1-debug traffic |
| * from this port; 2-debug traffic from other port; 3-COS0 traffic; 4-COS1 |
| * traffic. The reset value[14:0] is set to 0x4688 (15'b100_011_010_001_000) |
| * for management at priority 0; debug traffic at priorities 1 and 2; COS0 |
| * traffic at priority 3; and COS1 traffic at priority 4. */ |
| #define NIG_REG_P0_TX_ARB_PRIORITY_CLIENT 0x180e4 |
| /* [RW 6] Bit-map indicating which L2 hdrs may appear after the basic |
| * Ethernet header. */ |
| #define NIG_REG_P1_HDRS_AFTER_BASIC 0x1818c |
| #define NIG_REG_P1_LLH_FUNC_MEM2 0x184c0 |
| #define NIG_REG_P1_LLH_FUNC_MEM2_ENABLE 0x18460 |
| /* [RW 32] Specify the client number to be assigned to each priority of the |
| * strict priority arbiter. This register specifies bits 31:0 of the 36-bit |
| * value. Priority 0 is the highest priority. Bits [3:0] are for priority 0 |
| * client; bits [35-32] are for priority 8 client. The clients are assigned |
| * the following IDs: 0-management; 1-debug traffic from this port; 2-debug |
| * traffic from other port; 3-COS0 traffic; 4-COS1 traffic; 5-COS2 traffic; |
| * 6-COS3 traffic; 7-COS4 traffic; 8-COS5 traffic. The reset value[35:0] is |
| * set to 0x345678021. This is a new register (with 2_) added in E3 B0 to |
| * accommodate the 9 input clients to ETS arbiter. */ |
| #define NIG_REG_P0_TX_ARB_PRIORITY_CLIENT2_LSB 0x18680 |
| /* [RW 4] Specify the client number to be assigned to each priority of the |
| * strict priority arbiter. This register specifies bits 35:32 of the 36-bit |
| * value. Priority 0 is the highest priority. Bits [3:0] are for priority 0 |
| * client; bits [35-32] are for priority 8 client. The clients are assigned |
| * the following IDs: 0-management; 1-debug traffic from this port; 2-debug |
| * traffic from other port; 3-COS0 traffic; 4-COS1 traffic; 5-COS2 traffic; |
| * 6-COS3 traffic; 7-COS4 traffic; 8-COS5 traffic. The reset value[35:0] is |
| * set to 0x345678021. This is a new register (with 2_) added in E3 B0 to |
| * accommodate the 9 input clients to ETS arbiter. */ |
| #define NIG_REG_P0_TX_ARB_PRIORITY_CLIENT2_MSB 0x18684 |
| #define NIG_REG_P1_HWPFC_ENABLE 0x181d0 |
| #define NIG_REG_P1_MAC_IN_EN 0x185c0 |
| /* [RW 1] Output enable for TX MAC interface */ |
| #define NIG_REG_P1_MAC_OUT_EN 0x185c4 |
| /* [RW 1] Output enable for TX PAUSE signal to the MAC. */ |
| #define NIG_REG_P1_MAC_PAUSE_OUT_EN 0x185c8 |
| /* [RW 32] Eight 4-bit configurations for specifying which COS (0-15 for |
| * future expansion) each priorty is to be mapped to. Bits 3:0 specify the |
| * COS for priority 0. Bits 31:28 specify the COS for priority 7. The 3-bit |
| * priority field is extracted from the outer-most VLAN in receive packet. |
| * Only COS 0 and COS 1 are supported in E2. */ |
| #define NIG_REG_P1_PKT_PRIORITY_TO_COS 0x181a8 |
| /* [RW 16] Bit-map indicating which SAFC/PFC priorities to map to COS 0. A |
| * priority is mapped to COS 0 when the corresponding mask bit is 1. More |
| * than one bit may be set; allowing multiple priorities to be mapped to one |
| * COS. */ |
| #define NIG_REG_P1_RX_COS0_PRIORITY_MASK 0x181ac |
| /* [RW 16] Bit-map indicating which SAFC/PFC priorities to map to COS 1. A |
| * priority is mapped to COS 1 when the corresponding mask bit is 1. More |
| * than one bit may be set; allowing multiple priorities to be mapped to one |
| * COS. */ |
| #define NIG_REG_P1_RX_COS1_PRIORITY_MASK 0x181b0 |
| /* [RW 16] Bit-map indicating which SAFC/PFC priorities to map to COS 2. A |
| * priority is mapped to COS 2 when the corresponding mask bit is 1. More |
| * than one bit may be set; allowing multiple priorities to be mapped to one |
| * COS. */ |
| #define NIG_REG_P1_RX_COS2_PRIORITY_MASK 0x186f8 |
| /* [R 1] RX FIFO for receiving data from MAC is empty. */ |
| #define NIG_REG_P1_RX_MACFIFO_EMPTY 0x1858c |
| /* [R 1] TLLH FIFO is empty. */ |
| #define NIG_REG_P1_TLLH_FIFO_EMPTY 0x18338 |
| /* [RW 32] Specify which of the credit registers the client is to be mapped |
| * to. This register specifies bits 31:0 of the 36-bit value. Bits[3:0] are |
| * for client 0; bits [35:32] are for client 8. For clients that are not |
| * subject to WFQ credit blocking - their specifications here are not used. |
| * This is a new register (with 2_) added in E3 B0 to accommodate the 9 |
| * input clients to ETS arbiter. The reset default is set for management and |
| * debug to use credit registers 6, 7, and 8, respectively, and COSes 0-5 to |
| * use credit registers 0-5 respectively (0x543210876). Note that credit |
| * registers can not be shared between clients. Note also that there are |
| * only COS0-2 in port 1- there is a total of 6 clients in port 1. Only |
| * credit registers 0-5 are valid. This register should be configured |
| * appropriately before enabling WFQ. */ |
| #define NIG_REG_P1_TX_ARB_CLIENT_CREDIT_MAP2_LSB 0x186e8 |
| /* [RW 4] Specify which of the credit registers the client is to be mapped |
| * to. This register specifies bits 35:32 of the 36-bit value. Bits[3:0] are |
| * for client 0; bits [35:32] are for client 8. For clients that are not |
| * subject to WFQ credit blocking - their specifications here are not used. |
| * This is a new register (with 2_) added in E3 B0 to accommodate the 9 |
| * input clients to ETS arbiter. The reset default is set for management and |
| * debug to use credit registers 6, 7, and 8, respectively, and COSes 0-5 to |
| * use credit registers 0-5 respectively (0x543210876). Note that credit |
| * registers can not be shared between clients. Note also that there are |
| * only COS0-2 in port 1- there is a total of 6 clients in port 1. Only |
| * credit registers 0-5 are valid. This register should be configured |
| * appropriately before enabling WFQ. */ |
| #define NIG_REG_P1_TX_ARB_CLIENT_CREDIT_MAP2_MSB 0x186ec |
| /* [RW 9] Specify whether the client competes directly in the strict |
| * priority arbiter. The bits are mapped according to client ID (client IDs |
| * are defined in tx_arb_priority_client2): 0-management; 1-debug traffic |
| * from this port; 2-debug traffic from other port; 3-COS0 traffic; 4-COS1 |
| * traffic; 5-COS2 traffic; 6-COS3 traffic; 7-COS4 traffic; 8-COS5 traffic. |
| * Default value is set to enable strict priorities for all clients. */ |
| #define NIG_REG_P1_TX_ARB_CLIENT_IS_STRICT 0x18234 |
| /* [RW 9] Specify whether the client is subject to WFQ credit blocking. The |
| * bits are mapped according to client ID (client IDs are defined in |
| * tx_arb_priority_client2): 0-management; 1-debug traffic from this port; |
| * 2-debug traffic from other port; 3-COS0 traffic; 4-COS1 traffic; 5-COS2 |
| * traffic; 6-COS3 traffic; 7-COS4 traffic; 8-COS5 traffic. Default value is |
| * 0 for not using WFQ credit blocking. */ |
| #define NIG_REG_P1_TX_ARB_CLIENT_IS_SUBJECT2WFQ 0x18238 |
| #define NIG_REG_P1_TX_ARB_CREDIT_UPPER_BOUND_0 0x18258 |
| #define NIG_REG_P1_TX_ARB_CREDIT_UPPER_BOUND_1 0x1825c |
| #define NIG_REG_P1_TX_ARB_CREDIT_UPPER_BOUND_2 0x18260 |
| #define NIG_REG_P1_TX_ARB_CREDIT_UPPER_BOUND_3 0x18264 |
| #define NIG_REG_P1_TX_ARB_CREDIT_UPPER_BOUND_4 0x18268 |
| #define NIG_REG_P1_TX_ARB_CREDIT_UPPER_BOUND_5 0x186f4 |
| /* [RW 32] Specify the weight (in bytes) to be added to credit register 0 |
| * when it is time to increment. */ |
| #define NIG_REG_P1_TX_ARB_CREDIT_WEIGHT_0 0x18244 |
| #define NIG_REG_P1_TX_ARB_CREDIT_WEIGHT_1 0x18248 |
| #define NIG_REG_P1_TX_ARB_CREDIT_WEIGHT_2 0x1824c |
| #define NIG_REG_P1_TX_ARB_CREDIT_WEIGHT_3 0x18250 |
| #define NIG_REG_P1_TX_ARB_CREDIT_WEIGHT_4 0x18254 |
| #define NIG_REG_P1_TX_ARB_CREDIT_WEIGHT_5 0x186f0 |
| /* [RW 12] Specify the number of strict priority arbitration slots between |
| two round-robin arbitration slots to avoid starvation. A value of 0 means |
| no strict priority cycles - the strict priority with anti-starvation |
| arbiter becomes a round-robin arbiter. */ |
| #define NIG_REG_P1_TX_ARB_NUM_STRICT_ARB_SLOTS 0x18240 |
| /* [RW 32] Specify the client number to be assigned to each priority of the |
| strict priority arbiter. This register specifies bits 31:0 of the 36-bit |
| value. Priority 0 is the highest priority. Bits [3:0] are for priority 0 |
| client; bits [35-32] are for priority 8 client. The clients are assigned |
| the following IDs: 0-management; 1-debug traffic from this port; 2-debug |
| traffic from other port; 3-COS0 traffic; 4-COS1 traffic; 5-COS2 traffic; |
| 6-COS3 traffic; 7-COS4 traffic; 8-COS5 traffic. The reset value[35:0] is |
| set to 0x345678021. This is a new register (with 2_) added in E3 B0 to |
| accommodate the 9 input clients to ETS arbiter. Note that this register |
| is the same as the one for port 0, except that port 1 only has COS 0-2 |
| traffic. There is no traffic for COS 3-5 of port 1. */ |
| #define NIG_REG_P1_TX_ARB_PRIORITY_CLIENT2_LSB 0x186e0 |
| /* [RW 4] Specify the client number to be assigned to each priority of the |
| strict priority arbiter. This register specifies bits 35:32 of the 36-bit |
| value. Priority 0 is the highest priority. Bits [3:0] are for priority 0 |
| client; bits [35-32] are for priority 8 client. The clients are assigned |
| the following IDs: 0-management; 1-debug traffic from this port; 2-debug |
| traffic from other port; 3-COS0 traffic; 4-COS1 traffic; 5-COS2 traffic; |
| 6-COS3 traffic; 7-COS4 traffic; 8-COS5 traffic. The reset value[35:0] is |
| set to 0x345678021. This is a new register (with 2_) added in E3 B0 to |
| accommodate the 9 input clients to ETS arbiter. Note that this register |
| is the same as the one for port 0, except that port 1 only has COS 0-2 |
| traffic. There is no traffic for COS 3-5 of port 1. */ |
| #define NIG_REG_P1_TX_ARB_PRIORITY_CLIENT2_MSB 0x186e4 |
| /* [R 1] TX FIFO for transmitting data to MAC is empty. */ |
| #define NIG_REG_P1_TX_MACFIFO_EMPTY 0x18594 |
| /* [R 1] FIFO empty status of the MCP TX FIFO used for storing MCP packets |
| forwarded to the host. */ |
| #define NIG_REG_P1_TX_MNG_HOST_FIFO_EMPTY 0x182b8 |
| /* [RW 32] Specify the upper bound that credit register 0 is allowed to |
| * reach. */ |
| /* [RW 1] Pause enable for port0. This register may get 1 only when |
| ~safc_enable.safc_enable = 0 and ppp_enable.ppp_enable =0 for the same |
| port */ |
| #define NIG_REG_PAUSE_ENABLE_0 0x160c0 |
| #define NIG_REG_PAUSE_ENABLE_1 0x160c4 |
| /* [RW 1] Input enable for RX PBF LP IF */ |
| #define NIG_REG_PBF_LB_IN_EN 0x100b4 |
| /* [RW 1] Value of this register will be transmitted to port swap when |
| ~nig_registers_strap_override.strap_override =1 */ |
| #define NIG_REG_PORT_SWAP 0x10394 |
| /* [RW 1] PPP enable for port0. This register may get 1 only when |
| * ~safc_enable.safc_enable = 0 and pause_enable.pause_enable =0 for the |
| * same port */ |
| #define NIG_REG_PPP_ENABLE_0 0x160b0 |
| #define NIG_REG_PPP_ENABLE_1 0x160b4 |
| /* [RW 1] output enable for RX parser descriptor IF */ |
| #define NIG_REG_PRS_EOP_OUT_EN 0x10104 |
| /* [RW 1] Input enable for RX parser request IF */ |
| #define NIG_REG_PRS_REQ_IN_EN 0x100b8 |
| /* [RW 5] control to serdes - CL45 DEVAD */ |
| #define NIG_REG_SERDES0_CTRL_MD_DEVAD 0x10370 |
| /* [RW 1] control to serdes; 0 - clause 45; 1 - clause 22 */ |
| #define NIG_REG_SERDES0_CTRL_MD_ST 0x1036c |
| /* [RW 5] control to serdes - CL22 PHY_ADD and CL45 PRTAD */ |
| #define NIG_REG_SERDES0_CTRL_PHY_ADDR 0x10374 |
| /* [R 1] status from serdes0 that inputs to interrupt logic of link status */ |
| #define NIG_REG_SERDES0_STATUS_LINK_STATUS 0x10578 |
| /* [R 32] Rx statistics : In user packets discarded due to BRB backpressure |
| for port0 */ |
| #define NIG_REG_STAT0_BRB_DISCARD 0x105f0 |
| /* [R 32] Rx statistics : In user packets truncated due to BRB backpressure |
| for port0 */ |
| #define NIG_REG_STAT0_BRB_TRUNCATE 0x105f8 |
| /* [WB_R 36] Tx statistics : Number of packets from emac0 or bmac0 that |
| between 1024 and 1522 bytes for port0 */ |
| #define NIG_REG_STAT0_EGRESS_MAC_PKT0 0x10750 |
| /* [WB_R 36] Tx statistics : Number of packets from emac0 or bmac0 that |
| between 1523 bytes and above for port0 */ |
| #define NIG_REG_STAT0_EGRESS_MAC_PKT1 0x10760 |
| /* [R 32] Rx statistics : In user packets discarded due to BRB backpressure |
| for port1 */ |
| #define NIG_REG_STAT1_BRB_DISCARD 0x10628 |
| /* [WB_R 36] Tx statistics : Number of packets from emac1 or bmac1 that |
| between 1024 and 1522 bytes for port1 */ |
| #define NIG_REG_STAT1_EGRESS_MAC_PKT0 0x107a0 |
| /* [WB_R 36] Tx statistics : Number of packets from emac1 or bmac1 that |
| between 1523 bytes and above for port1 */ |
| #define NIG_REG_STAT1_EGRESS_MAC_PKT1 0x107b0 |
| /* [WB_R 64] Rx statistics : User octets received for LP */ |
| #define NIG_REG_STAT2_BRB_OCTET 0x107e0 |
| #define NIG_REG_STATUS_INTERRUPT_PORT0 0x10328 |
| #define NIG_REG_STATUS_INTERRUPT_PORT1 0x1032c |
| /* [RW 1] port swap mux selection. If this register equal to 0 then port |
| swap is equal to SPIO pin that inputs from ifmux_serdes_swap. If 1 then |
| ort swap is equal to ~nig_registers_port_swap.port_swap */ |
| #define NIG_REG_STRAP_OVERRIDE 0x10398 |
| /* [RW 1] output enable for RX_XCM0 IF */ |
| #define NIG_REG_XCM0_OUT_EN 0x100f0 |
| /* [RW 1] output enable for RX_XCM1 IF */ |
| #define NIG_REG_XCM1_OUT_EN 0x100f4 |
| /* [RW 1] control to xgxs - remote PHY in-band MDIO */ |
| #define NIG_REG_XGXS0_CTRL_EXTREMOTEMDIOST 0x10348 |
| /* [RW 5] control to xgxs - CL45 DEVAD */ |
| #define NIG_REG_XGXS0_CTRL_MD_DEVAD 0x1033c |
| /* [RW 1] control to xgxs; 0 - clause 45; 1 - clause 22 */ |
| #define NIG_REG_XGXS0_CTRL_MD_ST 0x10338 |
| /* [RW 5] control to xgxs - CL22 PHY_ADD and CL45 PRTAD */ |
| #define NIG_REG_XGXS0_CTRL_PHY_ADDR 0x10340 |
| /* [R 1] status from xgxs0 that inputs to interrupt logic of link10g. */ |
| #define NIG_REG_XGXS0_STATUS_LINK10G 0x10680 |
| /* [R 4] status from xgxs0 that inputs to interrupt logic of link status */ |
| #define NIG_REG_XGXS0_STATUS_LINK_STATUS 0x10684 |
| /* [RW 2] selection for XGXS lane of port 0 in NIG_MUX block */ |
| #define NIG_REG_XGXS_LANE_SEL_P0 0x102e8 |
| /* [RW 1] selection for port0 for NIG_MUX block : 0 = SerDes; 1 = XGXS */ |
| #define NIG_REG_XGXS_SERDES0_MODE_SEL 0x102e0 |
| #define NIG_STATUS_INTERRUPT_PORT0_REG_STATUS_EMAC0_MISC_MI_INT (0x1<<0) |
| #define NIG_STATUS_INTERRUPT_PORT0_REG_STATUS_SERDES0_LINK_STATUS (0x1<<9) |
| #define NIG_STATUS_INTERRUPT_PORT0_REG_STATUS_XGXS0_LINK10G (0x1<<15) |
| #define NIG_STATUS_INTERRUPT_PORT0_REG_STATUS_XGXS0_LINK_STATUS (0xf<<18) |
| #define NIG_STATUS_INTERRUPT_PORT0_REG_STATUS_XGXS0_LINK_STATUS_SIZE 18 |
| /* [RW 31] The upper bound of the weight of COS0 in the ETS command arbiter. */ |
| #define PBF_REG_COS0_UPPER_BOUND 0x15c05c |
| /* [RW 31] The upper bound of the weight of COS0 in the ETS command arbiter |
| * of port 0. */ |
| #define PBF_REG_COS0_UPPER_BOUND_P0 0x15c2cc |
| /* [RW 31] The upper bound of the weight of COS0 in the ETS command arbiter |
| * of port 1. */ |
| #define PBF_REG_COS0_UPPER_BOUND_P1 0x15c2e4 |
| /* [RW 31] The weight of COS0 in the ETS command arbiter. */ |
| #define PBF_REG_COS0_WEIGHT 0x15c054 |
| /* [RW 31] The weight of COS0 in port 0 ETS command arbiter. */ |
| #define PBF_REG_COS0_WEIGHT_P0 0x15c2a8 |
| /* [RW 31] The weight of COS0 in port 1 ETS command arbiter. */ |
| #define PBF_REG_COS0_WEIGHT_P1 0x15c2c0 |
| /* [RW 31] The upper bound of the weight of COS1 in the ETS command arbiter. */ |
| #define PBF_REG_COS1_UPPER_BOUND 0x15c060 |
| /* [RW 31] The weight of COS1 in the ETS command arbiter. */ |
| #define PBF_REG_COS1_WEIGHT 0x15c058 |
| /* [RW 31] The weight of COS1 in port 0 ETS command arbiter. */ |
| #define PBF_REG_COS1_WEIGHT_P0 0x15c2ac |
| /* [RW 31] The weight of COS1 in port 1 ETS command arbiter. */ |
| #define PBF_REG_COS1_WEIGHT_P1 0x15c2c4 |
| /* [RW 31] The weight of COS2 in port 0 ETS command arbiter. */ |
| #define PBF_REG_COS2_WEIGHT_P0 0x15c2b0 |
| /* [RW 31] The weight of COS2 in port 1 ETS command arbiter. */ |
| #define PBF_REG_COS2_WEIGHT_P1 0x15c2c8 |
| /* [RW 31] The weight of COS3 in port 0 ETS command arbiter. */ |
| #define PBF_REG_COS3_WEIGHT_P0 0x15c2b4 |
| /* [RW 31] The weight of COS4 in port 0 ETS command arbiter. */ |
| #define PBF_REG_COS4_WEIGHT_P0 0x15c2b8 |
| /* [RW 31] The weight of COS5 in port 0 ETS command arbiter. */ |
| #define PBF_REG_COS5_WEIGHT_P0 0x15c2bc |
| /* [R 11] Current credit for the LB queue in the tx port buffers in 16 byte |
| * lines. */ |
| #define PBF_REG_CREDIT_LB_Q 0x140338 |
| /* [R 11] Current credit for queue 0 in the tx port buffers in 16 byte |
| * lines. */ |
| #define PBF_REG_CREDIT_Q0 0x14033c |
| /* [R 11] Current credit for queue 1 in the tx port buffers in 16 byte |
| * lines. */ |
| #define PBF_REG_CREDIT_Q1 0x140340 |
| /* [RW 1] Disable processing further tasks from port 0 (after ending the |
| current task in process). */ |
| #define PBF_REG_DISABLE_NEW_TASK_PROC_P0 0x14005c |
| /* [RW 1] Disable processing further tasks from port 1 (after ending the |
| current task in process). */ |
| #define PBF_REG_DISABLE_NEW_TASK_PROC_P1 0x140060 |
| /* [RW 1] Disable processing further tasks from port 4 (after ending the |
| current task in process). */ |
| #define PBF_REG_DISABLE_NEW_TASK_PROC_P4 0x14006c |
| #define PBF_REG_DISABLE_PF 0x1402e8 |
| /* [RW 18] For port 0: For each client that is subject to WFQ (the |
| * corresponding bit is 1); indicates to which of the credit registers this |
| * client is mapped. For clients which are not credit blocked; their mapping |
| * is dont care. */ |
| #define PBF_REG_ETS_ARB_CLIENT_CREDIT_MAP_P0 0x15c288 |
| /* [RW 9] For port 1: For each client that is subject to WFQ (the |
| * corresponding bit is 1); indicates to which of the credit registers this |
| * client is mapped. For clients which are not credit blocked; their mapping |
| * is dont care. */ |
| #define PBF_REG_ETS_ARB_CLIENT_CREDIT_MAP_P1 0x15c28c |
| /* [RW 6] For port 0: Bit per client to indicate if the client competes in |
| * the strict priority arbiter directly (corresponding bit = 1); or first |
| * goes to the RR arbiter (corresponding bit = 0); and then competes in the |
| * lowest priority in the strict-priority arbiter. */ |
| #define PBF_REG_ETS_ARB_CLIENT_IS_STRICT_P0 0x15c278 |
| /* [RW 3] For port 1: Bit per client to indicate if the client competes in |
| * the strict priority arbiter directly (corresponding bit = 1); or first |
| * goes to the RR arbiter (corresponding bit = 0); and then competes in the |
| * lowest priority in the strict-priority arbiter. */ |
| #define PBF_REG_ETS_ARB_CLIENT_IS_STRICT_P1 0x15c27c |
| /* [RW 6] For port 0: Bit per client to indicate if the client is subject to |
| * WFQ credit blocking (corresponding bit = 1). */ |
| #define PBF_REG_ETS_ARB_CLIENT_IS_SUBJECT2WFQ_P0 0x15c280 |
| /* [RW 3] For port 0: Bit per client to indicate if the client is subject to |
| * WFQ credit blocking (corresponding bit = 1). */ |
| #define PBF_REG_ETS_ARB_CLIENT_IS_SUBJECT2WFQ_P1 0x15c284 |
| /* [RW 16] For port 0: The number of strict priority arbitration slots |
| * between 2 RR arbitration slots. A value of 0 means no strict priority |
| * cycles; i.e. the strict-priority w/ anti-starvation arbiter is a RR |
| * arbiter. */ |
| #define PBF_REG_ETS_ARB_NUM_STRICT_ARB_SLOTS_P0 0x15c2a0 |
| /* [RW 16] For port 1: The number of strict priority arbitration slots |
| * between 2 RR arbitration slots. A value of 0 means no strict priority |
| * cycles; i.e. the strict-priority w/ anti-starvation arbiter is a RR |
| * arbiter. */ |
| #define PBF_REG_ETS_ARB_NUM_STRICT_ARB_SLOTS_P1 0x15c2a4 |
| /* [RW 18] For port 0: Indicates which client is connected to each priority |
| * in the strict-priority arbiter. Priority 0 is the highest priority, and |
| * priority 5 is the lowest; to which the RR output is connected to (this is |
| * not configurable). */ |
| #define PBF_REG_ETS_ARB_PRIORITY_CLIENT_P0 0x15c270 |
| /* [RW 9] For port 1: Indicates which client is connected to each priority |
| * in the strict-priority arbiter. Priority 0 is the highest priority, and |
| * priority 5 is the lowest; to which the RR output is connected to (this is |
| * not configurable). */ |
| #define PBF_REG_ETS_ARB_PRIORITY_CLIENT_P1 0x15c274 |
| /* [RW 1] Indicates that ETS is performed between the COSes in the command |
| * arbiter. If reset strict priority w/ anti-starvation will be performed |
| * w/o WFQ. */ |
| #define PBF_REG_ETS_ENABLED 0x15c050 |
| /* [RW 6] Bit-map indicating which L2 hdrs may appear after the basic |
| * Ethernet header. */ |
| #define PBF_REG_HDRS_AFTER_BASIC 0x15c0a8 |
| /* [RW 6] Bit-map indicating which L2 hdrs may appear after L2 tag 0 */ |
| #define PBF_REG_HDRS_AFTER_TAG_0 0x15c0b8 |
| /* [R 1] Removed for E3 B0 - Indicates which COS is conncted to the highest |
| * priority in the command arbiter. */ |
| #define PBF_REG_HIGH_PRIORITY_COS_NUM 0x15c04c |
| #define PBF_REG_IF_ENABLE_REG 0x140044 |
| /* [RW 1] Init bit. When set the initial credits are copied to the credit |
| registers (except the port credits). Should be set and then reset after |
| the configuration of the block has ended. */ |
| #define PBF_REG_INIT 0x140000 |
| /* [RW 11] Initial credit for the LB queue in the tx port buffers in 16 byte |
| * lines. */ |
| #define PBF_REG_INIT_CRD_LB_Q 0x15c248 |
| /* [RW 11] Initial credit for queue 0 in the tx port buffers in 16 byte |
| * lines. */ |
| #define PBF_REG_INIT_CRD_Q0 0x15c230 |
| /* [RW 11] Initial credit for queue 1 in the tx port buffers in 16 byte |
| * lines. */ |
| #define PBF_REG_INIT_CRD_Q1 0x15c234 |
| /* [RW 1] Init bit for port 0. When set the initial credit of port 0 is |
| copied to the credit register. Should be set and then reset after the |
| configuration of the port has ended. */ |
| #define PBF_REG_INIT_P0 0x140004 |
| /* [RW 1] Init bit for port 1. When set the initial credit of port 1 is |
| copied to the credit register. Should be set and then reset after the |
| configuration of the port has ended. */ |
| #define PBF_REG_INIT_P1 0x140008 |
| /* [RW 1] Init bit for port 4. When set the initial credit of port 4 is |
| copied to the credit register. Should be set and then reset after the |
| configuration of the port has ended. */ |
| #define PBF_REG_INIT_P4 0x14000c |
| /* [R 32] Cyclic counter for the amount credits in 16 bytes lines added for |
| * the LB queue. Reset upon init. */ |
| #define PBF_REG_INTERNAL_CRD_FREED_CNT_LB_Q 0x140354 |
| /* [R 32] Cyclic counter for the amount credits in 16 bytes lines added for |
| * queue 0. Reset upon init. */ |
| #define PBF_REG_INTERNAL_CRD_FREED_CNT_Q0 0x140358 |
| /* [R 32] Cyclic counter for the amount credits in 16 bytes lines added for |
| * queue 1. Reset upon init. */ |
| #define PBF_REG_INTERNAL_CRD_FREED_CNT_Q1 0x14035c |
| /* [RW 1] Enable for mac interface 0. */ |
| #define PBF_REG_MAC_IF0_ENABLE 0x140030 |
| /* [RW 1] Enable for mac interface 1. */ |
| #define PBF_REG_MAC_IF1_ENABLE 0x140034 |
| /* [RW 1] Enable for the loopback interface. */ |
| #define PBF_REG_MAC_LB_ENABLE 0x140040 |
| /* [RW 6] Bit-map indicating which headers must appear in the packet */ |
| #define PBF_REG_MUST_HAVE_HDRS 0x15c0c4 |
| /* [RW 16] The number of strict priority arbitration slots between 2 RR |
| * arbitration slots. A value of 0 means no strict priority cycles; i.e. the |
| * strict-priority w/ anti-starvation arbiter is a RR arbiter. */ |
| #define PBF_REG_NUM_STRICT_ARB_SLOTS 0x15c064 |
| /* [RW 10] Port 0 threshold used by arbiter in 16 byte lines used when pause |
| not suppoterd. */ |
| #define PBF_REG_P0_ARB_THRSH 0x1400e4 |
| /* [R 11] Current credit for port 0 in the tx port buffers in 16 byte lines. */ |
| #define PBF_REG_P0_CREDIT 0x140200 |
| /* [RW 11] Initial credit for port 0 in the tx port buffers in 16 byte |
| lines. */ |
| #define PBF_REG_P0_INIT_CRD 0x1400d0 |
| /* [R 32] Cyclic counter for the amount credits in 16 bytes lines added for |
| * port 0. Reset upon init. */ |
| #define PBF_REG_P0_INTERNAL_CRD_FREED_CNT 0x140308 |
| /* [R 1] Removed for E3 B0 - Indication that pause is enabled for port 0. */ |
| #define PBF_REG_P0_PAUSE_ENABLE 0x140014 |
| /* [R 8] Removed for E3 B0 - Number of tasks in port 0 task queue. */ |
| #define PBF_REG_P0_TASK_CNT 0x140204 |
| /* [R 32] Removed for E3 B0 - Cyclic counter for number of 8 byte lines |
| * freed from the task queue of port 0. Reset upon init. */ |
| #define PBF_REG_P0_TQ_LINES_FREED_CNT 0x1402f0 |
| /* [R 12] Number of 8 bytes lines occupied in the task queue of port 0. */ |
| #define PBF_REG_P0_TQ_OCCUPANCY 0x1402fc |
| /* [R 11] Removed for E3 B0 - Current credit for port 1 in the tx port |
| * buffers in 16 byte lines. */ |
| #define PBF_REG_P1_CREDIT 0x140208 |
| /* [R 11] Removed for E3 B0 - Initial credit for port 0 in the tx port |
| * buffers in 16 byte lines. */ |
| #define PBF_REG_P1_INIT_CRD 0x1400d4 |
| /* [R 32] Cyclic counter for the amount credits in 16 bytes lines added for |
| * port 1. Reset upon init. */ |
| #define PBF_REG_P1_INTERNAL_CRD_FREED_CNT 0x14030c |
| /* [R 8] Removed for E3 B0 - Number of tasks in port 1 task queue. */ |
| #define PBF_REG_P1_TASK_CNT 0x14020c |
| /* [R 32] Removed for E3 B0 - Cyclic counter for number of 8 byte lines |
| * freed from the task queue of port 1. Reset upon init. */ |
| #define PBF_REG_P1_TQ_LINES_FREED_CNT 0x1402f4 |
| /* [R 12] Number of 8 bytes lines occupied in the task queue of port 1. */ |
| #define PBF_REG_P1_TQ_OCCUPANCY 0x140300 |
| /* [R 11] Current credit for port 4 in the tx port buffers in 16 byte lines. */ |
| #define PBF_REG_P4_CREDIT 0x140210 |
| /* [RW 11] Initial credit for port 4 in the tx port buffers in 16 byte |
| lines. */ |
| #define PBF_REG_P4_INIT_CRD 0x1400e0 |
| /* [R 32] Cyclic counter for the amount credits in 16 bytes lines added for |
| * port 4. Reset upon init. */ |
| #define PBF_REG_P4_INTERNAL_CRD_FREED_CNT 0x140310 |
| /* [R 8] Removed for E3 B0 - Number of tasks in port 4 task queue. */ |
| #define PBF_REG_P4_TASK_CNT 0x140214 |
| /* [R 32] Removed for E3 B0 - Cyclic counter for number of 8 byte lines |
| * freed from the task queue of port 4. Reset upon init. */ |
| #define PBF_REG_P4_TQ_LINES_FREED_CNT 0x1402f8 |
| /* [R 12] Number of 8 bytes lines occupied in the task queue of port 4. */ |
| #define PBF_REG_P4_TQ_OCCUPANCY 0x140304 |
| /* [RW 5] Interrupt mask register #0 read/write */ |
| #define PBF_REG_PBF_INT_MASK 0x1401d4 |
| /* [R 5] Interrupt register #0 read */ |
| #define PBF_REG_PBF_INT_STS 0x1401c8 |
| /* [RW 20] Parity mask register #0 read/write */ |
| #define PBF_REG_PBF_PRTY_MASK 0x1401e4 |
| /* [RC 20] Parity register #0 read clear */ |
| #define PBF_REG_PBF_PRTY_STS_CLR 0x1401dc |
| /* [RW 16] The Ethernet type value for L2 tag 0 */ |
| #define PBF_REG_TAG_ETHERTYPE_0 0x15c090 |
| /* [RW 4] The length of the info field for L2 tag 0. The length is between |
| * 2B and 14B; in 2B granularity */ |
| #define PBF_REG_TAG_LEN_0 0x15c09c |
| /* [R 32] Cyclic counter for number of 8 byte lines freed from the LB task |
| * queue. Reset upon init. */ |
| #define PBF_REG_TQ_LINES_FREED_CNT_LB_Q 0x14038c |
| /* [R 32] Cyclic counter for number of 8 byte lines freed from the task |
| * queue 0. Reset upon init. */ |
| #define PBF_REG_TQ_LINES_FREED_CNT_Q0 0x140390 |
| /* [R 32] Cyclic counter for number of 8 byte lines freed from task queue 1. |
| * Reset upon init. */ |
| #define PBF_REG_TQ_LINES_FREED_CNT_Q1 0x140394 |
| /* [R 13] Number of 8 bytes lines occupied in the task queue of the LB |
| * queue. */ |
| #define PBF_REG_TQ_OCCUPANCY_LB_Q 0x1403a8 |
| /* [R 13] Number of 8 bytes lines occupied in the task queue of queue 0. */ |
| #define PBF_REG_TQ_OCCUPANCY_Q0 0x1403ac |
| /* [R 13] Number of 8 bytes lines occupied in the task queue of queue 1. */ |
| #define PBF_REG_TQ_OCCUPANCY_Q1 0x1403b0 |
| #define PB_REG_CONTROL 0 |
| /* [RW 2] Interrupt mask register #0 read/write */ |
| #define PB_REG_PB_INT_MASK 0x28 |
| /* [R 2] Interrupt register #0 read */ |
| #define PB_REG_PB_INT_STS 0x1c |
| /* [RW 4] Parity mask register #0 read/write */ |
| #define PB_REG_PB_PRTY_MASK 0x38 |
| /* [R 4] Parity register #0 read */ |
| #define PB_REG_PB_PRTY_STS 0x2c |
| /* [RC 4] Parity register #0 read clear */ |
| #define PB_REG_PB_PRTY_STS_CLR 0x30 |
| #define PGLUE_B_PGLUE_B_INT_STS_REG_ADDRESS_ERROR (0x1<<0) |
| #define PGLUE_B_PGLUE_B_INT_STS_REG_CSSNOOP_FIFO_OVERFLOW (0x1<<8) |
| #define PGLUE_B_PGLUE_B_INT_STS_REG_INCORRECT_RCV_BEHAVIOR (0x1<<1) |
| #define PGLUE_B_PGLUE_B_INT_STS_REG_TCPL_ERROR_ATTN (0x1<<6) |
| #define PGLUE_B_PGLUE_B_INT_STS_REG_TCPL_IN_TWO_RCBS_ATTN (0x1<<7) |
| #define PGLUE_B_PGLUE_B_INT_STS_REG_VF_GRC_SPACE_VIOLATION_ATTN (0x1<<4) |
| #define PGLUE_B_PGLUE_B_INT_STS_REG_VF_LENGTH_VIOLATION_ATTN (0x1<<3) |
| #define PGLUE_B_PGLUE_B_INT_STS_REG_VF_MSIX_BAR_VIOLATION_ATTN (0x1<<5) |
| #define PGLUE_B_PGLUE_B_INT_STS_REG_WAS_ERROR_ATTN (0x1<<2) |
| /* [R 8] Config space A attention dirty bits. Each bit indicates that the |
| * corresponding PF generates config space A attention. Set by PXP. Reset by |
| * MCP writing 1 to icfg_space_a_request_clr. Note: register contains bits |
| * from both paths. */ |
| #define PGLUE_B_REG_CFG_SPACE_A_REQUEST 0x9010 |
| /* [R 8] Config space B attention dirty bits. Each bit indicates that the |
| * corresponding PF generates config space B attention. Set by PXP. Reset by |
| * MCP writing 1 to icfg_space_b_request_clr. Note: register contains bits |
| * from both paths. */ |
| #define PGLUE_B_REG_CFG_SPACE_B_REQUEST 0x9014 |
| /* [RW 1] Type A PF enable inbound interrupt table for CSDM. 0 - disable; 1 |
| * - enable. */ |
| #define PGLUE_B_REG_CSDM_INB_INT_A_PF_ENABLE 0x9194 |
| /* [RW 18] Type B VF inbound interrupt table for CSDM: bits[17:9]-mask; |
| * its[8:0]-address. Bits [1:0] must be zero (DW resolution address). */ |
| #define PGLUE_B_REG_CSDM_INB_INT_B_VF 0x916c |
| /* [RW 1] Type B VF enable inbound interrupt table for CSDM. 0 - disable; 1 |
| * - enable. */ |
| #define PGLUE_B_REG_CSDM_INB_INT_B_VF_ENABLE 0x919c |
| /* [RW 16] Start offset of CSDM zone A (queue zone) in the internal RAM */ |
| #define PGLUE_B_REG_CSDM_START_OFFSET_A 0x9100 |
| /* [RW 16] Start offset of CSDM zone B (legacy zone) in the internal RAM */ |
| #define PGLUE_B_REG_CSDM_START_OFFSET_B 0x9108 |
| /* [RW 5] VF Shift of CSDM zone B (legacy zone) in the internal RAM */ |
| #define PGLUE_B_REG_CSDM_VF_SHIFT_B 0x9110 |
| /* [RW 1] 0 - Zone A size is 136x32B; 1 - Zone A size is 152x32B. */ |
| #define PGLUE_B_REG_CSDM_ZONE_A_SIZE_PF 0x91ac |
| /* [R 8] FLR request attention dirty bits for PFs 0 to 7. Each bit indicates |
| * that the FLR register of the corresponding PF was set. Set by PXP. Reset |
| * by MCP writing 1 to flr_request_pf_7_0_clr. Note: register contains bits |
| * from both paths. */ |
| #define PGLUE_B_REG_FLR_REQUEST_PF_7_0 0x9028 |
| /* [W 8] FLR request attention dirty bits clear for PFs 0 to 7. MCP writes 1 |
| * to a bit in this register in order to clear the corresponding bit in |
| * flr_request_pf_7_0 register. Note: register contains bits from both |
| * paths. */ |
| #define PGLUE_B_REG_FLR_REQUEST_PF_7_0_CLR 0x9418 |
| /* [R 32] FLR request attention dirty bits for VFs 96 to 127. Each bit |
| * indicates that the FLR register of the corresponding VF was set. Set by |
| * PXP. Reset by MCP writing 1 to flr_request_vf_127_96_clr. */ |
| #define PGLUE_B_REG_FLR_REQUEST_VF_127_96 0x9024 |
| /* [R 32] FLR request attention dirty bits for VFs 0 to 31. Each bit |
| * indicates that the FLR register of the corresponding VF was set. Set by |
| * PXP. Reset by MCP writing 1 to flr_request_vf_31_0_clr. */ |
| #define PGLUE_B_REG_FLR_REQUEST_VF_31_0 0x9018 |
| /* [R 32] FLR request attention dirty bits for VFs 32 to 63. Each bit |
| * indicates that the FLR register of the corresponding VF was set. Set by |
| * PXP. Reset by MCP writing 1 to flr_request_vf_63_32_clr. */ |
| #define PGLUE_B_REG_FLR_REQUEST_VF_63_32 0x901c |
| /* [R 32] FLR request attention dirty bits for VFs 64 to 95. Each bit |
| * indicates that the FLR register of the corresponding VF was set. Set by |
| * PXP. Reset by MCP writing 1 to flr_request_vf_95_64_clr. */ |
| #define PGLUE_B_REG_FLR_REQUEST_VF_95_64 0x9020 |
| /* [R 8] Each bit indicates an incorrect behavior in user RX interface. Bit |
| * 0 - Target memory read arrived with a correctable error. Bit 1 - Target |
| * memory read arrived with an uncorrectable error. Bit 2 - Configuration RW |
| * arrived with a correctable error. Bit 3 - Configuration RW arrived with |
| * an uncorrectable error. Bit 4 - Completion with Configuration Request |
| * Retry Status. Bit 5 - Expansion ROM access received with a write request. |
| * Bit 6 - Completion with pcie_rx_err of 0000; CMPL_STATUS of non-zero; and |
| * pcie_rx_last not asserted. Bit 7 - Completion with pcie_rx_err of 1010; |
| * and pcie_rx_last not asserted. */ |
| #define PGLUE_B_REG_INCORRECT_RCV_DETAILS 0x9068 |
| #define PGLUE_B_REG_INTERNAL_PFID_ENABLE_MASTER 0x942c |
| #define PGLUE_B_REG_INTERNAL_PFID_ENABLE_TARGET_READ 0x9430 |
| #define PGLUE_B_REG_INTERNAL_PFID_ENABLE_TARGET_WRITE 0x9434 |
| #define PGLUE_B_REG_INTERNAL_VFID_ENABLE 0x9438 |
| /* [R 9] Interrupt register #0 read */ |
| #define PGLUE_B_REG_PGLUE_B_INT_STS 0x9298 |
| /* [RC 9] Interrupt register #0 read clear */ |
| #define PGLUE_B_REG_PGLUE_B_INT_STS_CLR 0x929c |
| /* [RW 2] Parity mask register #0 read/write */ |
| #define PGLUE_B_REG_PGLUE_B_PRTY_MASK 0x92b4 |
| /* [R 2] Parity register #0 read */ |
| #define PGLUE_B_REG_PGLUE_B_PRTY_STS 0x92a8 |
| /* [RC 2] Parity register #0 read clear */ |
| #define PGLUE_B_REG_PGLUE_B_PRTY_STS_CLR 0x92ac |
| /* [R 13] Details of first request received with error. [2:0] - PFID. [3] - |
| * VF_VALID. [9:4] - VFID. [11:10] - Error Code - 0 - Indicates Completion |
| * Timeout of a User Tx non-posted request. 1 - unsupported request. 2 - |
| * completer abort. 3 - Illegal value for this field. [12] valid - indicates |
| * if there was a completion error since the last time this register was |
| * cleared. */ |
| #define PGLUE_B_REG_RX_ERR_DETAILS 0x9080 |
| /* [R 18] Details of first ATS Translation Completion request received with |
| * error. [2:0] - PFID. [3] - VF_VALID. [9:4] - VFID. [11:10] - Error Code - |
| * 0 - Indicates Completion Timeout of a User Tx non-posted request. 1 - |
| * unsupported request. 2 - completer abort. 3 - Illegal value for this |
| * field. [16:12] - ATC OTB EntryID. [17] valid - indicates if there was a |
| * completion error since the last time this register was cleared. */ |
| #define PGLUE_B_REG_RX_TCPL_ERR_DETAILS 0x9084 |
| /* [W 8] Debug only - Shadow BME bits clear for PFs 0 to 7. MCP writes 1 to |
| * a bit in this register in order to clear the corresponding bit in |
| * shadow_bme_pf_7_0 register. MCP should never use this unless a |
| * work-around is needed. Note: register contains bits from both paths. */ |
| #define PGLUE_B_REG_SHADOW_BME_PF_7_0_CLR 0x9458 |
| /* [R 8] SR IOV disabled attention dirty bits. Each bit indicates that the |
| * VF enable register of the corresponding PF is written to 0 and was |
| * previously 1. Set by PXP. Reset by MCP writing 1 to |
| * sr_iov_disabled_request_clr. Note: register contains bits from both |
| * paths. */ |
| #define PGLUE_B_REG_SR_IOV_DISABLED_REQUEST 0x9030 |
| /* [R 32] Indicates the status of tags 32-63. 0 - tags is used - read |
| * completion did not return yet. 1 - tag is unused. Same functionality as |
| * pxp2_registers_pgl_exp_rom_data2 for tags 0-31. */ |
| #define PGLUE_B_REG_TAGS_63_32 0x9244 |
| /* [RW 1] Type A PF enable inbound interrupt table for TSDM. 0 - disable; 1 |
| * - enable. */ |
| #define PGLUE_B_REG_TSDM_INB_INT_A_PF_ENABLE 0x9170 |
| /* [RW 16] Start offset of TSDM zone A (queue zone) in the internal RAM */ |
| #define PGLUE_B_REG_TSDM_START_OFFSET_A 0x90c4 |
| /* [RW 16] Start offset of TSDM zone B (legacy zone) in the internal RAM */ |
| #define PGLUE_B_REG_TSDM_START_OFFSET_B 0x90cc |
| /* [RW 5] VF Shift of TSDM zone B (legacy zone) in the internal RAM */ |
| #define PGLUE_B_REG_TSDM_VF_SHIFT_B 0x90d4 |
| /* [RW 1] 0 - Zone A size is 136x32B; 1 - Zone A size is 152x32B. */ |
| #define PGLUE_B_REG_TSDM_ZONE_A_SIZE_PF 0x91a0 |
| /* [R 32] Address [31:0] of first read request not submitted due to error */ |
| #define PGLUE_B_REG_TX_ERR_RD_ADD_31_0 0x9098 |
| /* [R 32] Address [63:32] of first read request not submitted due to error */ |
| #define PGLUE_B_REG_TX_ERR_RD_ADD_63_32 0x909c |
| /* [R 31] Details of first read request not submitted due to error. [4:0] |
| * VQID. [5] TREQ. 1 - Indicates the request is a Translation Request. |
| * [20:8] - Length in bytes. [23:21] - PFID. [24] - VF_VALID. [30:25] - |
| * VFID. */ |
| #define PGLUE_B_REG_TX_ERR_RD_DETAILS 0x90a0 |
| /* [R 26] Details of first read request not submitted due to error. [15:0] |
| * Request ID. [19:16] client ID. [20] - last SR. [24:21] - Error type - |
| * [21] - Indicates was_error was set; [22] - Indicates BME was cleared; |
| * [23] - Indicates FID_enable was cleared; [24] - Indicates VF with parent |
| * PF FLR_request or IOV_disable_request dirty bit is set. [25] valid - |
| * indicates if there was a request not submitted due to error since the |
| * last time this register was cleared. */ |
| #define PGLUE_B_REG_TX_ERR_RD_DETAILS2 0x90a4 |
| /* [R 32] Address [31:0] of first write request not submitted due to error */ |
| #define PGLUE_B_REG_TX_ERR_WR_ADD_31_0 0x9088 |
| /* [R 32] Address [63:32] of first write request not submitted due to error */ |
| #define PGLUE_B_REG_TX_ERR_WR_ADD_63_32 0x908c |
| /* [R 31] Details of first write request not submitted due to error. [4:0] |
| * VQID. [20:8] - Length in bytes. [23:21] - PFID. [24] - VF_VALID. [30:25] |
| * - VFID. */ |
| #define PGLUE_B_REG_TX_ERR_WR_DETAILS 0x9090 |
| /* [R 26] Details of first write request not submitted due to error. [15:0] |
| * Request ID. [19:16] client ID. [20] - last SR. [24:21] - Error type - |
| * [21] - Indicates was_error was set; [22] - Indicates BME was cleared; |
| * [23] - Indicates FID_enable was cleared; [24] - Indicates VF with parent |
| * PF FLR_request or IOV_disable_request dirty bit is set. [25] valid - |
| * indicates if there was a request not submitted due to error since the |
| * last time this register was cleared. */ |
| #define PGLUE_B_REG_TX_ERR_WR_DETAILS2 0x9094 |
| /* [RW 10] Type A PF/VF inbound interrupt table for USDM: bits[9:5]-mask; |
| * its[4:0]-address relative to start_offset_a. Bits [1:0] can have any |
| * value (Byte resolution address). */ |
| #define PGLUE_B_REG_USDM_INB_INT_A_0 0x9128 |
| #define PGLUE_B_REG_USDM_INB_INT_A_1 0x912c |
| #define PGLUE_B_REG_USDM_INB_INT_A_2 0x9130 |
| #define PGLUE_B_REG_USDM_INB_INT_A_3 0x9134 |
| #define PGLUE_B_REG_USDM_INB_INT_A_4 0x9138 |
| #define PGLUE_B_REG_USDM_INB_INT_A_5 0x913c |
| #define PGLUE_B_REG_USDM_INB_INT_A_6 0x9140 |
| /* [RW 1] Type A PF enable inbound interrupt table for USDM. 0 - disable; 1 |
| * - enable. */ |
| #define PGLUE_B_REG_USDM_INB_INT_A_PF_ENABLE 0x917c |
| /* [RW 1] Type A VF enable inbound interrupt table for USDM. 0 - disable; 1 |
| * - enable. */ |
| #define PGLUE_B_REG_USDM_INB_INT_A_VF_ENABLE 0x9180 |
| /* [RW 1] Type B VF enable inbound interrupt table for USDM. 0 - disable; 1 |
| * - enable. */ |
| #define PGLUE_B_REG_USDM_INB_INT_B_VF_ENABLE 0x9184 |
| /* [RW 16] Start offset of USDM zone A (queue zone) in the internal RAM */ |
| #define PGLUE_B_REG_USDM_START_OFFSET_A 0x90d8 |
| /* [RW 16] Start offset of USDM zone B (legacy zone) in the internal RAM */ |
| #define PGLUE_B_REG_USDM_START_OFFSET_B 0x90e0 |
| /* [RW 5] VF Shift of USDM zone B (legacy zone) in the internal RAM */ |
| #define PGLUE_B_REG_USDM_VF_SHIFT_B 0x90e8 |
| /* [RW 1] 0 - Zone A size is 136x32B; 1 - Zone A size is 152x32B. */ |
| #define PGLUE_B_REG_USDM_ZONE_A_SIZE_PF 0x91a4 |
| /* [R 26] Details of first target VF request accessing VF GRC space that |
| * failed permission check. [14:0] Address. [15] w_nr: 0 - Read; 1 - Write. |
| * [21:16] VFID. [24:22] - PFID. [25] valid - indicates if there was a |
| * request accessing VF GRC space that failed permission check since the |
| * last time this register was cleared. Permission checks are: function |
| * permission; R/W permission; address range permission. */ |
| #define PGLUE_B_REG_VF_GRC_SPACE_VIOLATION_DETAILS 0x9234 |
| /* [R 31] Details of first target VF request with length violation (too many |
| * DWs) accessing BAR0. [12:0] Address in DWs (bits [14:2] of byte address). |
| * [14:13] BAR. [20:15] VFID. [23:21] - PFID. [29:24] - Length in DWs. [30] |
| * valid - indicates if there was a request with length violation since the |
| * last time this register was cleared. Length violations: length of more |
| * than 2DWs; length of 2DWs and address not QW aligned; window is GRC and |
| * length is more than 1 DW. */ |
| #define PGLUE_B_REG_VF_LENGTH_VIOLATION_DETAILS 0x9230 |
| /* [R 8] Was_error indication dirty bits for PFs 0 to 7. Each bit indicates |
| * that there was a completion with uncorrectable error for the |
| * corresponding PF. Set by PXP. Reset by MCP writing 1 to |
| * was_error_pf_7_0_clr. */ |
| #define PGLUE_B_REG_WAS_ERROR_PF_7_0 0x907c |
| /* [W 8] Was_error indication dirty bits clear for PFs 0 to 7. MCP writes 1 |
| * to a bit in this register in order to clear the corresponding bit in |
| * flr_request_pf_7_0 register. */ |
| #define PGLUE_B_REG_WAS_ERROR_PF_7_0_CLR 0x9470 |
| /* [R 32] Was_error indication dirty bits for VFs 96 to 127. Each bit |
| * indicates that there was a completion with uncorrectable error for the |
| * corresponding VF. Set by PXP. Reset by MCP writing 1 to |
| * was_error_vf_127_96_clr. */ |
| #define PGLUE_B_REG_WAS_ERROR_VF_127_96 0x9078 |
| /* [W 32] Was_error indication dirty bits clear for VFs 96 to 127. MCP |
| * writes 1 to a bit in this register in order to clear the corresponding |
| * bit in was_error_vf_127_96 register. */ |
| #define PGLUE_B_REG_WAS_ERROR_VF_127_96_CLR 0x9474 |
| /* [R 32] Was_error indication dirty bits for VFs 0 to 31. Each bit |
| * indicates that there was a completion with uncorrectable error for the |
| * corresponding VF. Set by PXP. Reset by MCP writing 1 to |
| * was_error_vf_31_0_clr. */ |
| #define PGLUE_B_REG_WAS_ERROR_VF_31_0 0x906c |
| /* [W 32] Was_error indication dirty bits clear for VFs 0 to 31. MCP writes |
| * 1 to a bit in this register in order to clear the corresponding bit in |
| * was_error_vf_31_0 register. */ |
| #define PGLUE_B_REG_WAS_ERROR_VF_31_0_CLR 0x9478 |
| /* [R 32] Was_error indication dirty bits for VFs 32 to 63. Each bit |
| * indicates that there was a completion with uncorrectable error for the |
| * corresponding VF. Set by PXP. Reset by MCP writing 1 to |
| * was_error_vf_63_32_clr. */ |
| #define PGLUE_B_REG_WAS_ERROR_VF_63_32 0x9070 |
| /* [W 32] Was_error indication dirty bits clear for VFs 32 to 63. MCP writes |
| * 1 to a bit in this register in order to clear the corresponding bit in |
| * was_error_vf_63_32 register. */ |
| #define PGLUE_B_REG_WAS_ERROR_VF_63_32_CLR 0x947c |
| /* [R 32] Was_error indication dirty bits for VFs 64 to 95. Each bit |
| * indicates that there was a completion with uncorrectable error for the |
| * corresponding VF. Set by PXP. Reset by MCP writing 1 to |
| * was_error_vf_95_64_clr. */ |
| #define PGLUE_B_REG_WAS_ERROR_VF_95_64 0x9074 |
| /* [W 32] Was_error indication dirty bits clear for VFs 64 to 95. MCP writes |
| * 1 to a bit in this register in order to clear the corresponding bit in |
| * was_error_vf_95_64 register. */ |
| #define PGLUE_B_REG_WAS_ERROR_VF_95_64_CLR 0x9480 |
| /* [RW 1] Type A PF enable inbound interrupt table for XSDM. 0 - disable; 1 |
| * - enable. */ |
| #define PGLUE_B_REG_XSDM_INB_INT_A_PF_ENABLE 0x9188 |
| /* [RW 16] Start offset of XSDM zone A (queue zone) in the internal RAM */ |
| #define PGLUE_B_REG_XSDM_START_OFFSET_A 0x90ec |
| /* [RW 16] Start offset of XSDM zone B (legacy zone) in the internal RAM */ |
| #define PGLUE_B_REG_XSDM_START_OFFSET_B 0x90f4 |
| /* [RW 5] VF Shift of XSDM zone B (legacy zone) in the internal RAM */ |
| #define PGLUE_B_REG_XSDM_VF_SHIFT_B 0x90fc |
| /* [RW 1] 0 - Zone A size is 136x32B; 1 - Zone A size is 152x32B. */ |
| #define PGLUE_B_REG_XSDM_ZONE_A_SIZE_PF 0x91a8 |
| #define PRS_REG_A_PRSU_20 0x40134 |
| /* [R 8] debug only: CFC load request current credit. Transaction based. */ |
| #define PRS_REG_CFC_LD_CURRENT_CREDIT 0x40164 |
| /* [R 8] debug only: CFC search request current credit. Transaction based. */ |
| #define PRS_REG_CFC_SEARCH_CURRENT_CREDIT 0x40168 |
| /* [RW 6] The initial credit for the search message to the CFC interface. |
| Credit is transaction based. */ |
| #define PRS_REG_CFC_SEARCH_INITIAL_CREDIT 0x4011c |
| /* [RW 24] CID for port 0 if no match */ |
| #define PRS_REG_CID_PORT_0 0x400fc |
| /* [RW 32] The CM header for flush message where 'load existed' bit in CFC |
| load response is reset and packet type is 0. Used in packet start message |
| to TCM. */ |
| #define PRS_REG_CM_HDR_FLUSH_LOAD_TYPE_0 0x400dc |
| #define PRS_REG_CM_HDR_FLUSH_LOAD_TYPE_1 0x400e0 |
| #define PRS_REG_CM_HDR_FLUSH_LOAD_TYPE_2 0x400e4 |
| #define PRS_REG_CM_HDR_FLUSH_LOAD_TYPE_3 0x400e8 |
| #define PRS_REG_CM_HDR_FLUSH_LOAD_TYPE_4 0x400ec |
| #define PRS_REG_CM_HDR_FLUSH_LOAD_TYPE_5 0x400f0 |
| /* [RW 32] The CM header for flush message where 'load existed' bit in CFC |
| load response is set and packet type is 0. Used in packet start message |
| to TCM. */ |
| #define PRS_REG_CM_HDR_FLUSH_NO_LOAD_TYPE_0 0x400bc |
| #define PRS_REG_CM_HDR_FLUSH_NO_LOAD_TYPE_1 0x400c0 |
| #define PRS_REG_CM_HDR_FLUSH_NO_LOAD_TYPE_2 0x400c4 |
| #define PRS_REG_CM_HDR_FLUSH_NO_LOAD_TYPE_3 0x400c8 |
| #define PRS_REG_CM_HDR_FLUSH_NO_LOAD_TYPE_4 0x400cc |
| #define PRS_REG_CM_HDR_FLUSH_NO_LOAD_TYPE_5 0x400d0 |
| /* [RW 32] The CM header for a match and packet type 1 for loopback port. |
| Used in packet start message to TCM. */ |
| #define PRS_REG_CM_HDR_LOOPBACK_TYPE_1 0x4009c |
| #define PRS_REG_CM_HDR_LOOPBACK_TYPE_2 0x400a0 |
| #define PRS_REG_CM_HDR_LOOPBACK_TYPE_3 0x400a4 |
| #define PRS_REG_CM_HDR_LOOPBACK_TYPE_4 0x400a8 |
| /* [RW 32] The CM header for a match and packet type 0. Used in packet start |
| message to TCM. */ |
| #define PRS_REG_CM_HDR_TYPE_0 0x40078 |
| #define PRS_REG_CM_HDR_TYPE_1 0x4007c |
| #define PRS_REG_CM_HDR_TYPE_2 0x40080 |
| #define PRS_REG_CM_HDR_TYPE_3 0x40084 |
| #define PRS_REG_CM_HDR_TYPE_4 0x40088 |
| /* [RW 32] The CM header in case there was not a match on the connection */ |
| #define PRS_REG_CM_NO_MATCH_HDR 0x400b8 |
| /* [RW 1] Indicates if in e1hov mode. 0=non-e1hov mode; 1=e1hov mode. */ |
| #define PRS_REG_E1HOV_MODE 0x401c8 |
| /* [RW 8] The 8-bit event ID for a match and packet type 1. Used in packet |
| start message to TCM. */ |
| #define PRS_REG_EVENT_ID_1 0x40054 |
| #define PRS_REG_EVENT_ID_2 0x40058 |
| #define PRS_REG_EVENT_ID_3 0x4005c |
| /* [RW 16] The Ethernet type value for FCoE */ |
| #define PRS_REG_FCOE_TYPE 0x401d0 |
| /* [RW 8] Context region for flush packet with packet type 0. Used in CFC |
| load request message. */ |
| #define PRS_REG_FLUSH_REGIONS_TYPE_0 0x40004 |
| #define PRS_REG_FLUSH_REGIONS_TYPE_1 0x40008 |
| #define PRS_REG_FLUSH_REGIONS_TYPE_2 0x4000c |
| #define PRS_REG_FLUSH_REGIONS_TYPE_3 0x40010 |
| #define PRS_REG_FLUSH_REGIONS_TYPE_4 0x40014 |
| #define PRS_REG_FLUSH_REGIONS_TYPE_5 0x40018 |
| #define PRS_REG_FLUSH_REGIONS_TYPE_6 0x4001c |
| #define PRS_REG_FLUSH_REGIONS_TYPE_7 0x40020 |
| /* [RW 6] Bit-map indicating which L2 hdrs may appear after the basic |
| * Ethernet header. */ |
| #define PRS_REG_HDRS_AFTER_BASIC 0x40238 |
| /* [RW 6] Bit-map indicating which L2 hdrs may appear after the basic |
| * Ethernet header for port 0 packets. */ |
| #define PRS_REG_HDRS_AFTER_BASIC_PORT_0 0x40270 |
| #define PRS_REG_HDRS_AFTER_BASIC_PORT_1 0x40290 |
| /* [R 6] Bit-map indicating which L2 hdrs may appear after L2 tag 0 */ |
| #define PRS_REG_HDRS_AFTER_TAG_0 0x40248 |
| /* [RW 6] Bit-map indicating which L2 hdrs may appear after L2 tag 0 for |
| * port 0 packets */ |
| #define PRS_REG_HDRS_AFTER_TAG_0_PORT_0 0x40280 |
| #define PRS_REG_HDRS_AFTER_TAG_0_PORT_1 0x402a0 |
| /* [RW 4] The increment value to send in the CFC load request message */ |
| #define PRS_REG_INC_VALUE 0x40048 |
| /* [RW 6] Bit-map indicating which headers must appear in the packet */ |
| #define PRS_REG_MUST_HAVE_HDRS 0x40254 |
| /* [RW 6] Bit-map indicating which headers must appear in the packet for |
| * port 0 packets */ |
| #define PRS_REG_MUST_HAVE_HDRS_PORT_0 0x4028c |
| #define PRS_REG_MUST_HAVE_HDRS_PORT_1 0x402ac |
| #define PRS_REG_NIC_MODE 0x40138 |
| /* [RW 8] The 8-bit event ID for cases where there is no match on the |
| connection. Used in packet start message to TCM. */ |
| #define PRS_REG_NO_MATCH_EVENT_ID 0x40070 |
| /* [ST 24] The number of input CFC flush packets */ |
| #define PRS_REG_NUM_OF_CFC_FLUSH_MESSAGES 0x40128 |
| /* [ST 32] The number of cycles the Parser halted its operation since it |
| could not allocate the next serial number */ |
| #define PRS_REG_NUM_OF_DEAD_CYCLES 0x40130 |
| /* [ST 24] The number of input packets */ |
| #define PRS_REG_NUM_OF_PACKETS 0x40124 |
| /* [ST 24] The number of input transparent flush packets */ |
| #define PRS_REG_NUM_OF_TRANSPARENT_FLUSH_MESSAGES 0x4012c |
| /* [RW 8] Context region for received Ethernet packet with a match and |
| packet type 0. Used in CFC load request message */ |
| #define PRS_REG_PACKET_REGIONS_TYPE_0 0x40028 |
| #define PRS_REG_PACKET_REGIONS_TYPE_1 0x4002c |
| #define PRS_REG_PACKET_REGIONS_TYPE_2 0x40030 |
| #define PRS_REG_PACKET_REGIONS_TYPE_3 0x40034 |
| #define PRS_REG_PACKET_REGIONS_TYPE_4 0x40038 |
| #define PRS_REG_PACKET_REGIONS_TYPE_5 0x4003c |
| #define PRS_REG_PACKET_REGIONS_TYPE_6 0x40040 |
| #define PRS_REG_PACKET_REGIONS_TYPE_7 0x40044 |
| /* [R 2] debug only: Number of pending requests for CAC on port 0. */ |
| #define PRS_REG_PENDING_BRB_CAC0_RQ 0x40174 |
| /* [R 2] debug only: Number of pending requests for header parsing. */ |
| #define PRS_REG_PENDING_BRB_PRS_RQ 0x40170 |
| /* [R 1] Interrupt register #0 read */ |
| #define PRS_REG_PRS_INT_STS 0x40188 |
| /* [RW 8] Parity mask register #0 read/write */ |
| #define PRS_REG_PRS_PRTY_MASK 0x401a4 |
| /* [R 8] Parity register #0 read */ |
| #define PRS_REG_PRS_PRTY_STS 0x40198 |
| /* [RC 8] Parity register #0 read clear */ |
| #define PRS_REG_PRS_PRTY_STS_CLR 0x4019c |
| /* [RW 8] Context region for pure acknowledge packets. Used in CFC load |
| request message */ |
| #define PRS_REG_PURE_REGIONS 0x40024 |
| /* [R 32] debug only: Serial number status lsb 32 bits. '1' indicates this |
| serail number was released by SDM but cannot be used because a previous |
| serial number was not released. */ |
| #define PRS_REG_SERIAL_NUM_STATUS_LSB 0x40154 |
| /* [R 32] debug only: Serial number status msb 32 bits. '1' indicates this |
| serail number was released by SDM but cannot be used because a previous |
| serial number was not released. */ |
| #define PRS_REG_SERIAL_NUM_STATUS_MSB 0x40158 |
| /* [R 4] debug only: SRC current credit. Transaction based. */ |
| #define PRS_REG_SRC_CURRENT_CREDIT 0x4016c |
| /* [RW 16] The Ethernet type value for L2 tag 0 */ |
| #define PRS_REG_TAG_ETHERTYPE_0 0x401d4 |
| /* [RW 4] The length of the info field for L2 tag 0. The length is between |
| * 2B and 14B; in 2B granularity */ |
| #define PRS_REG_TAG_LEN_0 0x4022c |
| /* [R 8] debug only: TCM current credit. Cycle based. */ |
| #define PRS_REG_TCM_CURRENT_CREDIT 0x40160 |
| /* [R 8] debug only: TSDM current credit. Transaction based. */ |
| #define PRS_REG_TSDM_CURRENT_CREDIT 0x4015c |
| #define PXP2_PXP2_INT_MASK_0_REG_PGL_CPL_AFT (0x1<<19) |
| #define PXP2_PXP2_INT_MASK_0_REG_PGL_CPL_OF (0x1<<20) |
| #define PXP2_PXP2_INT_MASK_0_REG_PGL_PCIE_ATTN (0x1<<22) |
| #define PXP2_PXP2_INT_MASK_0_REG_PGL_READ_BLOCKED (0x1<<23) |
| #define PXP2_PXP2_INT_MASK_0_REG_PGL_WRITE_BLOCKED (0x1<<24) |
| #define PXP2_PXP2_INT_STS_0_REG_WR_PGLUE_EOP_ERROR (0x1<<7) |
| #define PXP2_PXP2_INT_STS_CLR_0_REG_WR_PGLUE_EOP_ERROR (0x1<<7) |
| /* [R 6] Debug only: Number of used entries in the data FIFO */ |
| #define PXP2_REG_HST_DATA_FIFO_STATUS 0x12047c |
| /* [R 7] Debug only: Number of used entries in the header FIFO */ |
| #define PXP2_REG_HST_HEADER_FIFO_STATUS 0x120478 |
| #define PXP2_REG_PGL_ADDR_88_F0 0x120534 |
| /* [R 32] GRC address for configuration access to PCIE config address 0x88. |
| * any write to this PCIE address will cause a GRC write access to the |
| * address that's in t this register */ |
| #define PXP2_REG_PGL_ADDR_88_F1 0x120544 |
| #define PXP2_REG_PGL_ADDR_8C_F0 0x120538 |
| /* [R 32] GRC address for configuration access to PCIE config address 0x8c. |
| * any write to this PCIE address will cause a GRC write access to the |
| * address that's in t this register */ |
| #define PXP2_REG_PGL_ADDR_8C_F1 0x120548 |
| #define PXP2_REG_PGL_ADDR_90_F0 0x12053c |
| /* [R 32] GRC address for configuration access to PCIE config address 0x90. |
| * any write to this PCIE address will cause a GRC write access to the |
| * address that's in t this register */ |
| #define PXP2_REG_PGL_ADDR_90_F1 0x12054c |
| #define PXP2_REG_PGL_ADDR_94_F0 0x120540 |
| /* [R 32] GRC address for configuration access to PCIE config address 0x94. |
| * any write to this PCIE address will cause a GRC write access to the |
| * address that's in t this register */ |
| #define PXP2_REG_PGL_ADDR_94_F1 0x120550 |
| #define PXP2_REG_PGL_CONTROL0 0x120490 |
| #define PXP2_REG_PGL_CONTROL1 0x120514 |
| #define PXP2_REG_PGL_DEBUG 0x120520 |
| /* [RW 32] third dword data of expansion rom request. this register is |
| special. reading from it provides a vector outstanding read requests. if |
| a bit is zero it means that a read request on the corresponding tag did |
| not finish yet (not all completions have arrived for it) */ |
| #define PXP2_REG_PGL_EXP_ROM2 0x120808 |
| /* [RW 32] Inbound interrupt table for CSDM: bits[31:16]-mask; |
| its[15:0]-address */ |
| #define PXP2_REG_PGL_INT_CSDM_0 0x1204f4 |
| #define PXP2_REG_PGL_INT_CSDM_1 0x1204f8 |
| #define PXP2_REG_PGL_INT_CSDM_2 0x1204fc |
| #define PXP2_REG_PGL_INT_CSDM_3 0x120500 |
| #define PXP2_REG_PGL_INT_CSDM_4 0x120504 |
| #define PXP2_REG_PGL_INT_CSDM_5 0x120508 |
| #define PXP2_REG_PGL_INT_CSDM_6 0x12050c |
| #define PXP2_REG_PGL_INT_CSDM_7 0x120510 |
| /* [RW 32] Inbound interrupt table for TSDM: bits[31:16]-mask; |
| its[15:0]-address */ |
| #define PXP2_REG_PGL_INT_TSDM_0 0x120494 |
| #define PXP2_REG_PGL_INT_TSDM_1 0x120498 |
| #define PXP2_REG_PGL_INT_TSDM_2 0x12049c |
| #define PXP2_REG_PGL_INT_TSDM_3 0x1204a0 |
| #define PXP2_REG_PGL_INT_TSDM_4 0x1204a4 |
| #define PXP2_REG_PGL_INT_TSDM_5 0x1204a8 |
| #define PXP2_REG_PGL_INT_TSDM_6 0x1204ac |
| #define PXP2_REG_PGL_INT_TSDM_7 0x1204b0 |
| /* [RW 32] Inbound interrupt table for USDM: bits[31:16]-mask; |
| its[15:0]-address */ |
| #define PXP2_REG_PGL_INT_USDM_0 0x1204b4 |
| #define PXP2_REG_PGL_INT_USDM_1 0x1204b8 |
| #define PXP2_REG_PGL_INT_USDM_2 0x1204bc |
| #define PXP2_REG_PGL_INT_USDM_3 0x1204c0 |
| #define PXP2_REG_PGL_INT_USDM_4 0x1204c4 |
| #define PXP2_REG_PGL_INT_USDM_5 0x1204c8 |
| #define PXP2_REG_PGL_INT_USDM_6 0x1204cc |
| #define PXP2_REG_PGL_INT_USDM_7 0x1204d0 |
| /* [RW 32] Inbound interrupt table for XSDM: bits[31:16]-mask; |
| its[15:0]-address */ |
| #define PXP2_REG_PGL_INT_XSDM_0 0x1204d4 |
| #define PXP2_REG_PGL_INT_XSDM_1 0x1204d8 |
| #define PXP2_REG_PGL_INT_XSDM_2 0x1204dc |
| #define PXP2_REG_PGL_INT_XSDM_3 0x1204e0 |
| #define PXP2_REG_PGL_INT_XSDM_4 0x1204e4 |
| #define PXP2_REG_PGL_INT_XSDM_5 0x1204e8 |
| #define PXP2_REG_PGL_INT_XSDM_6 0x1204ec |
| #define PXP2_REG_PGL_INT_XSDM_7 0x1204f0 |
| /* [RW 3] this field allows one function to pretend being another function |
| when accessing any BAR mapped resource within the device. the value of |
| the field is the number of the function that will be accessed |
| effectively. after software write to this bit it must read it in order to |
| know that the new value is updated */ |
| #define PXP2_REG_PGL_PRETEND_FUNC_F0 0x120674 |
| #define PXP2_REG_PGL_PRETEND_FUNC_F1 0x120678 |
| #define PXP2_REG_PGL_PRETEND_FUNC_F2 0x12067c |
| #define PXP2_REG_PGL_PRETEND_FUNC_F3 0x120680 |
| #define PXP2_REG_PGL_PRETEND_FUNC_F4 0x120684 |
| #define PXP2_REG_PGL_PRETEND_FUNC_F5 0x120688 |
| #define PXP2_REG_PGL_PRETEND_FUNC_F6 0x12068c |
| #define PXP2_REG_PGL_PRETEND_FUNC_F7 0x120690 |
| /* [R 1] this bit indicates that a read request was blocked because of |
| bus_master_en was deasserted */ |
| #define PXP2_REG_PGL_READ_BLOCKED 0x120568 |
| #define PXP2_REG_PGL_TAGS_LIMIT 0x1205a8 |
| /* [R 18] debug only */ |
| #define PXP2_REG_PGL_TXW_CDTS 0x12052c |
| /* [R 1] this bit indicates that a write request was blocked because of |
| bus_master_en was deasserted */ |
| #define PXP2_REG_PGL_WRITE_BLOCKED 0x120564 |
| #define PXP2_REG_PSWRQ_BW_ADD1 0x1201c0 |
| #define PXP2_REG_PSWRQ_BW_ADD10 0x1201e4 |
| #define PXP2_REG_PSWRQ_BW_ADD11 0x1201e8 |
| #define PXP2_REG_PSWRQ_BW_ADD2 0x1201c4 |
| #define PXP2_REG_PSWRQ_BW_ADD28 0x120228 |
| #define PXP2_REG_PSWRQ_BW_ADD3 0x1201c8 |
| #define PXP2_REG_PSWRQ_BW_ADD6 0x1201d4 |
| #define PXP2_REG_PSWRQ_BW_ADD7 0x1201d8 |
| #define PXP2_REG_PSWRQ_BW_ADD8 0x1201dc |
| #define PXP2_REG_PSWRQ_BW_ADD9 0x1201e0 |
| #define PXP2_REG_PSWRQ_BW_CREDIT 0x12032c |
| #define PXP2_REG_PSWRQ_BW_L1 0x1202b0 |
| #define PXP2_REG_PSWRQ_BW_L10 0x1202d4 |
| #define PXP2_REG_PSWRQ_BW_L11 0x1202d8 |
| #define PXP2_REG_PSWRQ_BW_L2 0x1202b4 |
| #define PXP2_REG_PSWRQ_BW_L28 0x120318 |
| #define PXP2_REG_PSWRQ_BW_L3 0x1202b8 |
| #define PXP2_REG_PSWRQ_BW_L6 0x1202c4 |
| #define PXP2_REG_PSWRQ_BW_L7 0x1202c8 |
| #define PXP2_REG_PSWRQ_BW_L8 0x1202cc |
| #define PXP2_REG_PSWRQ_BW_L9 0x1202d0 |
| #define PXP2_REG_PSWRQ_BW_RD 0x120324 |
| #define PXP2_REG_PSWRQ_BW_UB1 0x120238 |
| #define PXP2_REG_PSWRQ_BW_UB10 0x12025c |
| #define PXP2_REG_PSWRQ_BW_UB11 0x120260 |
| #define PXP2_REG_PSWRQ_BW_UB2 0x12023c |
| #define PXP2_REG_PSWRQ_BW_UB28 0x1202a0 |
| #define PXP2_REG_PSWRQ_BW_UB3 0x120240 |
| #define PXP2_REG_PSWRQ_BW_UB6 0x12024c |
| #define PXP2_REG_PSWRQ_BW_UB7 0x120250 |
| #define PXP2_REG_PSWRQ_BW_UB8 0x120254 |
| #define PXP2_REG_PSWRQ_BW_UB9 0x120258 |
| #define PXP2_REG_PSWRQ_BW_WR 0x120328 |
| #define PXP2_REG_PSWRQ_CDU0_L2P 0x120000 |
| #define PXP2_REG_PSWRQ_QM0_L2P 0x120038 |
| #define PXP2_REG_PSWRQ_SRC0_L2P 0x120054 |
| #define PXP2_REG_PSWRQ_TM0_L2P 0x12001c |
| #define PXP2_REG_PSWRQ_TSDM0_L2P 0x1200e0 |
| /* [RW 32] Interrupt mask register #0 read/write */ |
| #define PXP2_REG_PXP2_INT_MASK_0 0x120578 |
| /* [R 32] Interrupt register #0 read */ |
| #define PXP2_REG_PXP2_INT_STS_0 0x12056c |
| #define PXP2_REG_PXP2_INT_STS_1 0x120608 |
| /* [RC 32] Interrupt register #0 read clear */ |
| #define PXP2_REG_PXP2_INT_STS_CLR_0 0x120570 |
| /* [RW 32] Parity mask register #0 read/write */ |
| #define PXP2_REG_PXP2_PRTY_MASK_0 0x120588 |
| #define PXP2_REG_PXP2_PRTY_MASK_1 0x120598 |
| /* [R 32] Parity register #0 read */ |
| #define PXP2_REG_PXP2_PRTY_STS_0 0x12057c |
| #define PXP2_REG_PXP2_PRTY_STS_1 0x12058c |
| /* [RC 32] Parity register #0 read clear */ |
| #define PXP2_REG_PXP2_PRTY_STS_CLR_0 0x120580 |
| #define PXP2_REG_PXP2_PRTY_STS_CLR_1 0x120590 |
| /* [R 1] Debug only: The 'almost full' indication from each fifo (gives |
| indication about backpressure) */ |
| #define PXP2_REG_RD_ALMOST_FULL_0 0x120424 |
| /* [R 8] Debug only: The blocks counter - number of unused block ids */ |
| #define PXP2_REG_RD_BLK_CNT 0x120418 |
| /* [RW 8] Debug only: Total number of available blocks in Tetris Buffer. |
| Must be bigger than 6. Normally should not be changed. */ |
| #define PXP2_REG_RD_BLK_NUM_CFG 0x12040c |
| /* [RW 2] CDU byte swapping mode configuration for master read requests */ |
| #define PXP2_REG_RD_CDURD_SWAP_MODE 0x120404 |
| /* [RW 1] When '1'; inputs to the PSWRD block are ignored */ |
| #define PXP2_REG_RD_DISABLE_INPUTS 0x120374 |
| /* [R 1] PSWRD internal memories initialization is done */ |
| #define PXP2_REG_RD_INIT_DONE 0x120370 |
| /* [RW 8] The maximum number of blocks in Tetris Buffer that can be |
| allocated for vq10 */ |
| #define PXP2_REG_RD_MAX_BLKS_VQ10 0x1203a0 |
| /* [RW 8] The maximum number of blocks in Tetris Buffer that can be |
| allocated for vq11 */ |
| #define PXP2_REG_RD_MAX_BLKS_VQ11 0x1203a4 |
| /* [RW 8] The maximum number of blocks in Tetris Buffer that can be |
| allocated for vq17 */ |
| #define PXP2_REG_RD_MAX_BLKS_VQ17 0x1203bc |
| /* [RW 8] The maximum number of blocks in Tetris Buffer that can be |
| allocated for vq18 */ |
| #define PXP2_REG_RD_MAX_BLKS_VQ18 0x1203c0 |
| /* [RW 8] The maximum number of blocks in Tetris Buffer that can be |
| allocated for vq19 */ |
| #define PXP2_REG_RD_MAX_BLKS_VQ19 0x1203c4 |
| /* [RW 8] The maximum number of blocks in Tetris Buffer that can be |
| allocated for vq22 */ |
| #define PXP2_REG_RD_MAX_BLKS_VQ22 0x1203d0 |
| /* [RW 8] The maximum number of blocks in Tetris Buffer that can be |
| allocated for vq25 */ |
| #define PXP2_REG_RD_MAX_BLKS_VQ25 0x1203dc |
| /* [RW 8] The maximum number of blocks in Tetris Buffer that can be |
| allocated for vq6 */ |
| #define PXP2_REG_RD_MAX_BLKS_VQ6 0x120390 |
| /* [RW 8] The maximum number of blocks in Tetris Buffer that can be |
| allocated for vq9 */ |
| #define PXP2_REG_RD_MAX_BLKS_VQ9 0x12039c |
| /* [RW 2] PBF byte swapping mode configuration for master read requests */ |
| #define PXP2_REG_RD_PBF_SWAP_MODE 0x1203f4 |
| /* [R 1] Debug only: Indication if delivery ports are idle */ |
| #define PXP2_REG_RD_PORT_IS_IDLE_0 0x12041c |
| #define PXP2_REG_RD_PORT_IS_IDLE_1 0x120420 |
| /* [RW 2] QM byte swapping mode configuration for master read requests */ |
| #define PXP2_REG_RD_QM_SWAP_MODE 0x1203f8 |
| /* [R 7] Debug only: The SR counter - number of unused sub request ids */ |
| #define PXP2_REG_RD_SR_CNT 0x120414 |
| /* [RW 2] SRC byte swapping mode configuration for master read requests */ |
| #define PXP2_REG_RD_SRC_SWAP_MODE 0x120400 |
| /* [RW 7] Debug only: Total number of available PCI read sub-requests. Must |
| be bigger than 1. Normally should not be changed. */ |
| #define PXP2_REG_RD_SR_NUM_CFG 0x120408 |
| /* [RW 1] Signals the PSWRD block to start initializing internal memories */ |
| #define PXP2_REG_RD_START_INIT 0x12036c |
| /* [RW 2] TM byte swapping mode configuration for master read requests */ |
| #define PXP2_REG_RD_TM_SWAP_MODE 0x1203fc |
| /* [RW 10] Bandwidth addition to VQ0 write requests */ |
| #define PXP2_REG_RQ_BW_RD_ADD0 0x1201bc |
| /* [RW 10] Bandwidth addition to VQ12 read requests */ |
| #define PXP2_REG_RQ_BW_RD_ADD12 0x1201ec |
| /* [RW 10] Bandwidth addition to VQ13 read requests */ |
| #define PXP2_REG_RQ_BW_RD_ADD13 0x1201f0 |
| /* [RW 10] Bandwidth addition to VQ14 read requests */ |
| #define PXP2_REG_RQ_BW_RD_ADD14 0x1201f4 |
| /* [RW 10] Bandwidth addition to VQ15 read requests */ |
| #define PXP2_REG_RQ_BW_RD_ADD15 0x1201f8 |
| /* [RW 10] Bandwidth addition to VQ16 read requests */ |
| #define PXP2_REG_RQ_BW_RD_ADD16 0x1201fc |
| /* [RW 10] Bandwidth addition to VQ17 read requests */ |
| #define PXP2_REG_RQ_BW_RD_ADD17 0x120200 |
| /* [RW 10] Bandwidth addition to VQ18 read requests */ |
| #define PXP2_REG_RQ_BW_RD_ADD18 0x120204 |
| /* [RW 10] Bandwidth addition to VQ19 read requests */ |
| #define PXP2_REG_RQ_BW_RD_ADD19 0x120208 |
| /* [RW 10] Bandwidth addition to VQ20 read requests */ |
| #define PXP2_REG_RQ_BW_RD_ADD20 0x12020c |
| /* [RW 10] Bandwidth addition to VQ22 read requests */ |
| #define PXP2_REG_RQ_BW_RD_ADD22 0x120210 |
| /* [RW 10] Bandwidth addition to VQ23 read requests */ |
| #define PXP2_REG_RQ_BW_RD_ADD23 0x120214 |
| /* [RW 10] Bandwidth addition to VQ24 read requests */ |
| #define PXP2_REG_RQ_BW_RD_ADD24 0x120218 |
| /* [RW 10] Bandwidth addition to VQ25 read requests */ |
| #define PXP2_REG_RQ_BW_RD_ADD25 0x12021c |
| /* [RW 10] Bandwidth addition to VQ26 read requests */ |
| #define PXP2_REG_RQ_BW_RD_ADD26 0x120220 |
| /* [RW 10] Bandwidth addition to VQ27 read requests */ |
| #define PXP2_REG_RQ_BW_RD_ADD27 0x120224 |
| /* [RW 10] Bandwidth addition to VQ4 read requests */ |
| #define PXP2_REG_RQ_BW_RD_ADD4 0x1201cc |
| /* [RW 10] Bandwidth addition to VQ5 read requests */ |
| #define PXP2_REG_RQ_BW_RD_ADD5 0x1201d0 |
| /* [RW 10] Bandwidth Typical L for VQ0 Read requests */ |
| #define PXP2_REG_RQ_BW_RD_L0 0x1202ac |
| /* [RW 10] Bandwidth Typical L for VQ12 Read requests */ |
| #define PXP2_REG_RQ_BW_RD_L12 0x1202dc |
| /* [RW 10] Bandwidth Typical L for VQ13 Read requests */ |
| #define PXP2_REG_RQ_BW_RD_L13 0x1202e0 |
| /* [RW 10] Bandwidth Typical L for VQ14 Read requests */ |
| #define PXP2_REG_RQ_BW_RD_L14 0x1202e4 |
| /* [RW 10] Bandwidth Typical L for VQ15 Read requests */ |
| #define PXP2_REG_RQ_BW_RD_L15 0x1202e8 |
| /* [RW 10] Bandwidth Typical L for VQ16 Read requests */ |
| #define PXP2_REG_RQ_BW_RD_L16 0x1202ec |
| /* [RW 10] Bandwidth Typical L for VQ17 Read requests */ |
| #define PXP2_REG_RQ_BW_RD_L17 0x1202f0 |
| /* [RW 10] Bandwidth Typical L for VQ18 Read requests */ |
| #define PXP2_REG_RQ_BW_RD_L18 0x1202f4 |
| /* [RW 10] Bandwidth Typical L for VQ19 Read requests */ |
| #define PXP2_REG_RQ_BW_RD_L19 0x1202f8 |
| /* [RW 10] Bandwidth Typical L for VQ20 Read requests */ |
| #define PXP2_REG_RQ_BW_RD_L20 0x1202fc |
| /* [RW 10] Bandwidth Typical L for VQ22 Read requests */ |
| #define PXP2_REG_RQ_BW_RD_L22 0x120300 |
| /* [RW 10] Bandwidth Typical L for VQ23 Read requests */ |
| #define PXP2_REG_RQ_BW_RD_L23 0x120304 |
| /* [RW 10] Bandwidth Typical L for VQ24 Read requests */ |
| #define PXP2_REG_RQ_BW_RD_L24 0x120308 |
| /* [RW 10] Bandwidth Typical L for VQ25 Read requests */ |
| #define PXP2_REG_RQ_BW_RD_L25 0x12030c |
| /* [RW 10] Bandwidth Typical L for VQ26 Read requests */ |
| #define PXP2_REG_RQ_BW_RD_L26 0x120310 |
| /* [RW 10] Bandwidth Typical L for VQ27 Read requests */ |
| #define PXP2_REG_RQ_BW_RD_L27 0x120314 |
| /* [RW 10] Bandwidth Typical L for VQ4 Read requests */ |
| #define PXP2_REG_RQ_BW_RD_L4 0x1202bc |
| /* [RW 10] Bandwidth Typical L for VQ5 Read- currently not used */ |
| #define PXP2_REG_RQ_BW_RD_L5 0x1202c0 |
| /* [RW 7] Bandwidth upper bound for VQ0 read requests */ |
| #define PXP2_REG_RQ_BW_RD_UBOUND0 0x120234 |
| /* [RW 7] Bandwidth upper bound for VQ12 read requests */ |
| #define PXP2_REG_RQ_BW_RD_UBOUND12 0x120264 |
| /* [RW 7] Bandwidth upper bound for VQ13 read requests */ |
| #define PXP2_REG_RQ_BW_RD_UBOUND13 0x120268 |
| /* [RW 7] Bandwidth upper bound for VQ14 read requests */ |
| #define PXP2_REG_RQ_BW_RD_UBOUND14 0x12026c |
| /* [RW 7] Bandwidth upper bound for VQ15 read requests */ |
| #define PXP2_REG_RQ_BW_RD_UBOUND15 0x120270 |
| /* [RW 7] Bandwidth upper bound for VQ16 read requests */ |
| #define PXP2_REG_RQ_BW_RD_UBOUND16 0x120274 |
| /* [RW 7] Bandwidth upper bound for VQ17 read requests */ |
| #define PXP2_REG_RQ_BW_RD_UBOUND17 0x120278 |
| /* [RW 7] Bandwidth upper bound for VQ18 read requests */ |
| #define PXP2_REG_RQ_BW_RD_UBOUND18 0x12027c |
| /* [RW 7] Bandwidth upper bound for VQ19 read requests */ |
| #define PXP2_REG_RQ_BW_RD_UBOUND19 0x120280 |
| /* [RW 7] Bandwidth upper bound for VQ20 read requests */ |
| #define PXP2_REG_RQ_BW_RD_UBOUND20 0x120284 |
| /* [RW 7] Bandwidth upper bound for VQ22 read requests */ |
| #define PXP2_REG_RQ_BW_RD_UBOUND22 0x120288 |
| /* [RW 7] Bandwidth upper bound for VQ23 read requests */ |
| #define PXP2_REG_RQ_BW_RD_UBOUND23 0x12028c |
| /* [RW 7] Bandwidth upper bound for VQ24 read requests */ |
| #define PXP2_REG_RQ_BW_RD_UBOUND24 0x120290 |
| /* [RW 7] Bandwidth upper bound for VQ25 read requests */ |
| #define PXP2_REG_RQ_BW_RD_UBOUND25 0x120294 |
| /* [RW 7] Bandwidth upper bound for VQ26 read requests */ |
| #define PXP2_REG_RQ_BW_RD_UBOUND26 0x120298 |
| /* [RW 7] Bandwidth upper bound for VQ27 read requests */ |
| #define PXP2_REG_RQ_BW_RD_UBOUND27 0x12029c |
| /* [RW 7] Bandwidth upper bound for VQ4 read requests */ |
| #define PXP2_REG_RQ_BW_RD_UBOUND4 0x120244 |
| /* [RW 7] Bandwidth upper bound for VQ5 read requests */ |
| #define PXP2_REG_RQ_BW_RD_UBOUND5 0x120248 |
| /* [RW 10] Bandwidth addition to VQ29 write requests */ |
| #define PXP2_REG_RQ_BW_WR_ADD29 0x12022c |
| /* [RW 10] Bandwidth addition to VQ30 write requests */ |
| #define PXP2_REG_RQ_BW_WR_ADD30 0x120230 |
| /* [RW 10] Bandwidth Typical L for VQ29 Write requests */ |
| #define PXP2_REG_RQ_BW_WR_L29 0x12031c |
| /* [RW 10] Bandwidth Typical L for VQ30 Write requests */ |
| #define PXP2_REG_RQ_BW_WR_L30 0x120320 |
| /* [RW 7] Bandwidth upper bound for VQ29 */ |
| #define PXP2_REG_RQ_BW_WR_UBOUND29 0x1202a4 |
| /* [RW 7] Bandwidth upper bound for VQ30 */ |
| #define PXP2_REG_RQ_BW_WR_UBOUND30 0x1202a8 |
| /* [RW 18] external first_mem_addr field in L2P table for CDU module port 0 */ |
| #define PXP2_REG_RQ_CDU0_EFIRST_MEM_ADDR 0x120008 |
| /* [RW 2] Endian mode for cdu */ |
| #define PXP2_REG_RQ_CDU_ENDIAN_M 0x1201a0 |
| #define PXP2_REG_RQ_CDU_FIRST_ILT 0x12061c |
| #define PXP2_REG_RQ_CDU_LAST_ILT 0x120620 |
| /* [RW 3] page size in L2P table for CDU module; -4k; -8k; -16k; -32k; -64k; |
| -128k */ |
| #define PXP2_REG_RQ_CDU_P_SIZE 0x120018 |
| /* [R 1] 1' indicates that the requester has finished its internal |
| configuration */ |
| #define PXP2_REG_RQ_CFG_DONE 0x1201b4 |
| /* [RW 2] Endian mode for debug */ |
| #define PXP2_REG_RQ_DBG_ENDIAN_M 0x1201a4 |
| /* [RW 1] When '1'; requests will enter input buffers but wont get out |
| towards the glue */ |
| #define PXP2_REG_RQ_DISABLE_INPUTS 0x120330 |
| /* [RW 4] Determines alignment of write SRs when a request is split into |
| * several SRs. 0 - 8B aligned. 1 - 64B aligned. 2 - 128B aligned. 3 - 256B |
| * aligned. 4 - 512B aligned. */ |
| #define PXP2_REG_RQ_DRAM_ALIGN 0x1205b0 |
| /* [RW 4] Determines alignment of read SRs when a request is split into |
| * several SRs. 0 - 8B aligned. 1 - 64B aligned. 2 - 128B aligned. 3 - 256B |
| * aligned. 4 - 512B aligned. */ |
| #define PXP2_REG_RQ_DRAM_ALIGN_RD 0x12092c |
| /* [RW 1] when set the new alignment method (E2) will be applied; when reset |
| * the original alignment method (E1 E1H) will be applied */ |
| #define PXP2_REG_RQ_DRAM_ALIGN_SEL 0x120930 |
| /* [RW 1] If 1 ILT failiue will not result in ELT access; An interrupt will |
| be asserted */ |
| #define PXP2_REG_RQ_ELT_DISABLE 0x12066c |
| /* [RW 2] Endian mode for hc */ |
| #define PXP2_REG_RQ_HC_ENDIAN_M 0x1201a8 |
| /* [RW 1] when '0' ILT logic will work as in A0; otherwise B0; for back |
| compatibility needs; Note that different registers are used per mode */ |
| #define PXP2_REG_RQ_ILT_MODE 0x1205b4 |
| /* [WB 53] Onchip address table */ |
| #define PXP2_REG_RQ_ONCHIP_AT 0x122000 |
| /* [WB 53] Onchip address table - B0 */ |
| #define PXP2_REG_RQ_ONCHIP_AT_B0 0x128000 |
| /* [RW 13] Pending read limiter threshold; in Dwords */ |
| #define PXP2_REG_RQ_PDR_LIMIT 0x12033c |
| /* [RW 2] Endian mode for qm */ |
| #define PXP2_REG_RQ_QM_ENDIAN_M 0x120194 |
| #define PXP2_REG_RQ_QM_FIRST_ILT 0x120634 |
| #define PXP2_REG_RQ_QM_LAST_ILT 0x120638 |
| /* [RW 3] page size in L2P table for QM module; -4k; -8k; -16k; -32k; -64k; |
| -128k */ |
| #define PXP2_REG_RQ_QM_P_SIZE 0x120050 |
| /* [RW 1] 1' indicates that the RBC has finished configuring the PSWRQ */ |
| #define PXP2_REG_RQ_RBC_DONE 0x1201b0 |
| /* [RW 3] Max burst size filed for read requests port 0; 000 - 128B; |
| 001:256B; 010: 512B; 11:1K:100:2K; 01:4K */ |
| #define PXP2_REG_RQ_RD_MBS0 0x120160 |
| /* [RW 3] Max burst size filed for read requests port 1; 000 - 128B; |
| 001:256B; 010: 512B; 11:1K:100:2K; 01:4K */ |
| #define PXP2_REG_RQ_RD_MBS1 0x120168 |
| /* [RW 2] Endian mode for src */ |
| #define PXP2_REG_RQ_SRC_ENDIAN_M 0x12019c |
| #define PXP2_REG_RQ_SRC_FIRST_ILT 0x12063c |
| #define PXP2_REG_RQ_SRC_LAST_ILT 0x120640 |
| /* [RW 3] page size in L2P table for SRC module; -4k; -8k; -16k; -32k; -64k; |
| -128k */ |
| #define PXP2_REG_RQ_SRC_P_SIZE 0x12006c |
| /* [RW 2] Endian mode for tm */ |
| #define PXP2_REG_RQ_TM_ENDIAN_M 0x120198 |
| #define PXP2_REG_RQ_TM_FIRST_ILT 0x120644 |
| #define PXP2_REG_RQ_TM_LAST_ILT 0x120648 |
| /* [RW 3] page size in L2P table for TM module; -4k; -8k; -16k; -32k; -64k; |
| -128k */ |
| #define PXP2_REG_RQ_TM_P_SIZE 0x120034 |
| /* [R 5] Number of entries in the ufifo; his fifo has l2p completions */ |
| #define PXP2_REG_RQ_UFIFO_NUM_OF_ENTRY 0x12080c |
| /* [RW 18] external first_mem_addr field in L2P table for USDM module port 0 */ |
| #define PXP2_REG_RQ_USDM0_EFIRST_MEM_ADDR 0x120094 |
| /* [R 8] Number of entries occupied by vq 0 in pswrq memory */ |
| #define PXP2_REG_RQ_VQ0_ENTRY_CNT 0x120810 |
| /* [R 8] Number of entries occupied by vq 10 in pswrq memory */ |
| #define PXP2_REG_RQ_VQ10_ENTRY_CNT 0x120818 |
| /* [R 8] Number of entries occupied by vq 11 in pswrq memory */ |
| #define PXP2_REG_RQ_VQ11_ENTRY_CNT 0x120820 |
| /* [R 8] Number of entries occupied by vq 12 in pswrq memory */ |
| #define PXP2_REG_RQ_VQ12_ENTRY_CNT 0x120828 |
| /* [R 8] Number of entries occupied by vq 13 in pswrq memory */ |
| #define PXP2_REG_RQ_VQ13_ENTRY_CNT 0x120830 |
| /* [R 8] Number of entries occupied by vq 14 in pswrq memory */ |
| #define PXP2_REG_RQ_VQ14_ENTRY_CNT 0x120838 |
| /* [R 8] Number of entries occupied by vq 15 in pswrq memory */ |
| #define PXP2_REG_RQ_VQ15_ENTRY_CNT 0x120840 |
| /* [R 8] Number of entries occupied by vq 16 in pswrq memory */ |
| #define PXP2_REG_RQ_VQ16_ENTRY_CNT 0x120848 |
| /* [R 8] Number of entries occupied by vq 17 in pswrq memory */ |
| #define PXP2_REG_RQ_VQ17_ENTRY_CNT 0x120850 |
| /* [R 8] Number of entries occupied by vq 18 in pswrq memory */ |
| #define PXP2_REG_RQ_VQ18_ENTRY_CNT 0x120858 |
| /* [R 8] Number of entries occupied by vq 19 in pswrq memory */ |
| #define PXP2_REG_RQ_VQ19_ENTRY_CNT 0x120860 |
| /* [R 8] Number of entries occupied by vq 1 in pswrq memory */ |
| #define PXP2_REG_RQ_VQ1_ENTRY_CNT 0x120868 |
| /* [R 8] Number of entries occupied by vq 20 in pswrq memory */ |
| #define PXP2_REG_RQ_VQ20_ENTRY_CNT 0x120870 |
| /* [R 8] Number of entries occupied by vq 21 in pswrq memory */ |
| #define PXP2_REG_RQ_VQ21_ENTRY_CNT 0x120878 |
| /* [R 8] Number of entries occupied by vq 22 in pswrq memory */ |
| #define PXP2_REG_RQ_VQ22_ENTRY_CNT 0x120880 |
| /* [R 8] Number of entries occupied by vq 23 in pswrq memory */ |
| #define PXP2_REG_RQ_VQ23_ENTRY_CNT 0x120888 |
| /* [R 8] Number of entries occupied by vq 24 in pswrq memory */ |
| #define PXP2_REG_RQ_VQ24_ENTRY_CNT 0x120890 |
| /* [R 8] Number of entries occupied by vq 25 in pswrq memory */ |
| #define PXP2_REG_RQ_VQ25_ENTRY_CNT 0x120898 |
| /* [R 8] Number of entries occupied by vq 26 in pswrq memory */ |
| #define PXP2_REG_RQ_VQ26_ENTRY_CNT 0x1208a0 |
| /* [R 8] Number of entries occupied by vq 27 in pswrq memory */ |
| #define PXP2_REG_RQ_VQ27_ENTRY_CNT 0x1208a8 |
| /* [R 8] Number of entries occupied by vq 28 in pswrq memory */ |
| #define PXP2_REG_RQ_VQ28_ENTRY_CNT 0x1208b0 |
| /* [R 8] Number of entries occupied by vq 29 in pswrq memory */ |
| #define PXP2_REG_RQ_VQ29_ENTRY_CNT 0x1208b8 |
| /* [R 8] Number of entries occupied by vq 2 in pswrq memory */ |
| #define PXP2_REG_RQ_VQ2_ENTRY_CNT 0x1208c0 |
| /* [R 8] Number of entries occupied by vq 30 in pswrq memory */ |
| #define PXP2_REG_RQ_VQ30_ENTRY_CNT 0x1208c8 |
| /* [R 8] Number of entries occupied by vq 31 in pswrq memory */ |
| #define PXP2_REG_RQ_VQ31_ENTRY_CNT 0x1208d0 |
| /* [R 8] Number of entries occupied by vq 3 in pswrq memory */ |
| #define PXP2_REG_RQ_VQ3_ENTRY_CNT 0x1208d8 |
| /* [R 8] Number of entries occupied by vq 4 in pswrq memory */ |
| #define PXP2_REG_RQ_VQ4_ENTRY_CNT 0x1208e0 |
| /* [R 8] Number of entries occupied by vq 5 in pswrq memory */ |
| #define PXP2_REG_RQ_VQ5_ENTRY_CNT 0x1208e8 |
| /* [R 8] Number of entries occupied by vq 6 in pswrq memory */ |
| #define PXP2_REG_RQ_VQ6_ENTRY_CNT 0x1208f0 |
| /* [R 8] Number of entries occupied by vq 7 in pswrq memory */ |
| #define PXP2_REG_RQ_VQ7_ENTRY_CNT 0x1208f8 |
| /* [R 8] Number of entries occupied by vq 8 in pswrq memory */ |
| #define PXP2_REG_RQ_VQ8_ENTRY_CNT 0x120900 |
| /* [R 8] Number of entries occupied by vq 9 in pswrq memory */ |
| #define PXP2_REG_RQ_VQ9_ENTRY_CNT 0x120908 |
| /* [RW 3] Max burst size filed for write requests port 0; 000 - 128B; |
| 001:256B; 010: 512B; */ |
| #define PXP2_REG_RQ_WR_MBS0 0x12015c |
| /* [RW 3] Max burst size filed for write requests port 1; 000 - 128B; |
| 001:256B; 010: 512B; */ |
| #define PXP2_REG_RQ_WR_MBS1 0x120164 |
| /* [RW 2] 0 - 128B; - 256B; - 512B; - 1024B; when the payload in the |
| buffer reaches this number has_payload will be asserted */ |
| #define PXP2_REG_WR_CDU_MPS 0x1205f0 |
| /* [RW 2] 0 - 128B; - 256B; - 512B; - 1024B; when the payload in the |
| buffer reaches this number has_payload will be asserted */ |
| #define PXP2_REG_WR_CSDM_MPS 0x1205d0 |
| /* [RW 2] 0 - 128B; - 256B; - 512B; - 1024B; when the payload in the |
| buffer reaches this number has_payload will be asserted */ |
| #define PXP2_REG_WR_DBG_MPS 0x1205e8 |
| /* [RW 2] 0 - 128B; - 256B; - 512B; - 1024B; when the payload in the |
| buffer reaches this number has_payload will be asserted */ |
| #define PXP2_REG_WR_DMAE_MPS 0x1205ec |
| /* [RW 10] if Number of entries in dmae fifo will be higher than this |
| threshold then has_payload indication will be asserted; the default value |
| should be equal to > write MBS size! */ |
| #define PXP2_REG_WR_DMAE_TH 0x120368 |
| /* [RW 2] 0 - 128B; - 256B; - 512B; - 1024B; when the payload in the |
| buffer reaches this number has_payload will be asserted */ |
| #define PXP2_REG_WR_HC_MPS 0x1205c8 |
| /* [RW 2] 0 - 128B; - 256B; - 512B; - 1024B; when the payload in the |
| buffer reaches this number has_payload will be asserted */ |
| #define PXP2_REG_WR_QM_MPS 0x1205dc |
| /* [RW 1] 0 - working in A0 mode; - working in B0 mode */ |
| #define PXP2_REG_WR_REV_MODE 0x120670 |
| /* [RW 2] 0 - 128B; - 256B; - 512B; - 1024B; when the payload in the |
| buffer reaches this number has_payload will be asserted */ |
| #define PXP2_REG_WR_SRC_MPS 0x1205e4 |
| /* [RW 2] 0 - 128B; - 256B; - 512B; - 1024B; when the payload in the |
| buffer reaches this number has_payload will be asserted */ |
| #define PXP2_REG_WR_TM_MPS 0x1205e0 |
| /* [RW 2] 0 - 128B; - 256B; - 512B; - 1024B; when the payload in the |
| buffer reaches this number has_payload will be asserted */ |
| #define PXP2_REG_WR_TSDM_MPS 0x1205d4 |
| /* [RW 10] if Number of entries in usdmdp fifo will be higher than this |
| threshold then has_payload indication will be asserted; the default value |
| should be equal to > write MBS size! */ |
| #define PXP2_REG_WR_USDMDP_TH 0x120348 |
| /* [RW 2] 0 - 128B; - 256B; - 512B; - 1024B; when the payload in the |
| buffer reaches this number has_payload will be asserted */ |
| #define PXP2_REG_WR_USDM_MPS 0x1205cc |
| /* [RW 2] 0 - 128B; - 256B; - 512B; - 1024B; when the payload in the |
| buffer reaches this number has_payload will be asserted */ |
| #define PXP2_REG_WR_XSDM_MPS 0x1205d8 |
| /* [R 1] debug only: Indication if PSWHST arbiter is idle */ |
| #define PXP_REG_HST_ARB_IS_IDLE 0x103004 |
| /* [R 8] debug only: A bit mask for all PSWHST arbiter clients. '1' means |
| this client is waiting for the arbiter. */ |
| #define PXP_REG_HST_CLIENTS_WAITING_TO_ARB 0x103008 |
| /* [RW 1] When 1; doorbells are discarded and not passed to doorbell queue |
| block. Should be used for close the gates. */ |
| #define PXP_REG_HST_DISCARD_DOORBELLS 0x1030a4 |
| /* [R 1] debug only: '1' means this PSWHST is discarding doorbells. This bit |
| should update according to 'hst_discard_doorbells' register when the state |
| machine is idle */ |
| #define PXP_REG_HST_DISCARD_DOORBELLS_STATUS 0x1030a0 |
| /* [RW 1] When 1; new internal writes arriving to the block are discarded. |
| Should be used for close the gates. */ |
| #define PXP_REG_HST_DISCARD_INTERNAL_WRITES 0x1030a8 |
| /* [R 6] debug only: A bit mask for all PSWHST internal write clients. '1' |
| means this PSWHST is discarding inputs from this client. Each bit should |
| update according to 'hst_discard_internal_writes' register when the state |
| machine is idle. */ |
| #define PXP_REG_HST_DISCARD_INTERNAL_WRITES_STATUS 0x10309c |
| /* [WB 160] Used for initialization of the inbound interrupts memory */ |
| #define PXP_REG_HST_INBOUND_INT 0x103800 |
| /* [RW 32] Interrupt mask register #0 read/write */ |
| #define PXP_REG_PXP_INT_MASK_0 0x103074 |
| #define PXP_REG_PXP_INT_MASK_1 0x103084 |
| /* [R 32] Interrupt register #0 read */ |
| #define PXP_REG_PXP_INT_STS_0 0x103068 |
| #define PXP_REG_PXP_INT_STS_1 0x103078 |
| /* [RC 32] Interrupt register #0 read clear */ |
| #define PXP_REG_PXP_INT_STS_CLR_0 0x10306c |
| #define PXP_REG_PXP_INT_STS_CLR_1 0x10307c |
| /* [RW 27] Parity mask register #0 read/write */ |
| #define PXP_REG_PXP_PRTY_MASK 0x103094 |
| /* [R 26] Parity register #0 read */ |
| #define PXP_REG_PXP_PRTY_STS 0x103088 |
| /* [RC 27] Parity register #0 read clear */ |
| #define PXP_REG_PXP_PRTY_STS_CLR 0x10308c |
| /* [RW 4] The activity counter initial increment value sent in the load |
| request */ |
| #define QM_REG_ACTCTRINITVAL_0 0x168040 |
| #define QM_REG_ACTCTRINITVAL_1 0x168044 |
| #define QM_REG_ACTCTRINITVAL_2 0x168048 |
| #define QM_REG_ACTCTRINITVAL_3 0x16804c |
| /* [RW 32] The base logical address (in bytes) of each physical queue. The |
| index I represents the physical queue number. The 12 lsbs are ignore and |
| considered zero so practically there are only 20 bits in this register; |
| queues 63-0 */ |
| #define QM_REG_BASEADDR 0x168900 |
| /* [RW 32] The base logical address (in bytes) of each physical queue. The |
| index I represents the physical queue number. The 12 lsbs are ignore and |
| considered zero so practically there are only 20 bits in this register; |
| queues 127-64 */ |
| #define QM_REG_BASEADDR_EXT_A 0x16e100 |
| /* [RW 16] The byte credit cost for each task. This value is for both ports */ |
| #define QM_REG_BYTECRDCOST 0x168234 |
| /* [RW 16] The initial byte credit value for both ports. */ |
| #define QM_REG_BYTECRDINITVAL 0x168238 |
| /* [RW 32] A bit per physical queue. If the bit is cleared then the physical |
| queue uses port 0 else it uses port 1; queues 31-0 */ |
| #define QM_REG_BYTECRDPORT_LSB 0x168228 |
| /* [RW 32] A bit per physical queue. If the bit is cleared then the physical |
| queue uses port 0 else it uses port 1; queues 95-64 */ |
| #define QM_REG_BYTECRDPORT_LSB_EXT_A 0x16e520 |
| /* [RW 32] A bit per physical queue. If the bit is cleared then the physical |
| queue uses port 0 else it uses port 1; queues 63-32 */ |
| #define QM_REG_BYTECRDPORT_MSB 0x168224 |
| /* [RW 32] A bit per physical queue. If the bit is cleared then the physical |
| queue uses port 0 else it uses port 1; queues 127-96 */ |
| #define QM_REG_BYTECRDPORT_MSB_EXT_A 0x16e51c |
| /* [RW 16] The byte credit value that if above the QM is considered almost |
| full */ |
| #define QM_REG_BYTECREDITAFULLTHR 0x168094 |
| /* [RW 4] The initial credit for interface */ |
| #define QM_REG_CMINITCRD_0 0x1680cc |
| #define QM_REG_BYTECRDCMDQ_0 0x16e6e8 |
| #define QM_REG_CMINITCRD_1 0x1680d0 |
| #define QM_REG_CMINITCRD_2 0x1680d4 |
| #define QM_REG_CMINITCRD_3 0x1680d8 |
| #define QM_REG_CMINITCRD_4 0x1680dc |
| #define QM_REG_CMINITCRD_5 0x1680e0 |
| #define QM_REG_CMINITCRD_6 0x1680e4 |
| #define QM_REG_CMINITCRD_7 0x1680e8 |
| /* [RW 8] A mask bit per CM interface. If this bit is 0 then this interface |
| is masked */ |
| #define QM_REG_CMINTEN 0x1680ec |
| /* [RW 12] A bit vector which indicates which one of the queues are tied to |
| interface 0 */ |
| #define QM_REG_CMINTVOQMASK_0 0x1681f4 |
| #define QM_REG_CMINTVOQMASK_1 0x1681f8 |
| #define QM_REG_CMINTVOQMASK_2 0x1681fc |
| #define QM_REG_CMINTVOQMASK_3 0x168200 |
| #define QM_REG_CMINTVOQMASK_4 0x168204 |
| #define QM_REG_CMINTVOQMASK_5 0x168208 |
| #define QM_REG_CMINTVOQMASK_6 0x16820c |
| #define QM_REG_CMINTVOQMASK_7 0x168210 |
| /* [RW 20] The number of connections divided by 16 which dictates the size |
| of each queue which belongs to even function number. */ |
| #define QM_REG_CONNNUM_0 0x168020 |
| /* [R 6] Keep the fill level of the fifo from write client 4 */ |
| #define QM_REG_CQM_WRC_FIFOLVL 0x168018 |
| /* [RW 8] The context regions sent in the CFC load request */ |
| #define QM_REG_CTXREG_0 0x168030 |
| #define QM_REG_CTXREG_1 0x168034 |
| #define QM_REG_CTXREG_2 0x168038 |
| #define QM_REG_CTXREG_3 0x16803c |
| /* [RW 12] The VOQ mask used to select the VOQs which needs to be full for |
| bypass enable */ |
| #define QM_REG_ENBYPVOQMASK 0x16823c |
| /* [RW 32] A bit mask per each physical queue. If a bit is set then the |
| physical queue uses the byte credit; queues 31-0 */ |
| #define QM_REG_ENBYTECRD_LSB 0x168220 |
| /* [RW 32] A bit mask per each physical queue. If a bit is set then the |
| physical queue uses the byte credit; queues 95-64 */ |
| #define QM_REG_ENBYTECRD_LSB_EXT_A 0x16e518 |
| /* [RW 32] A bit mask per each physical queue. If a bit is set then the |
| physical queue uses the byte credit; queues 63-32 */ |
| #define QM_REG_ENBYTECRD_MSB 0x16821c |
| /* [RW 32] A bit mask per each physical queue. If a bit is set then the |
| physical queue uses the byte credit; queues 127-96 */ |
| #define QM_REG_ENBYTECRD_MSB_EXT_A 0x16e514 |
| /* [RW 4] If cleared then the secondary interface will not be served by the |
| RR arbiter */ |
| #define QM_REG_ENSEC 0x1680f0 |
| /* [RW 32] NA */ |
| #define QM_REG_FUNCNUMSEL_LSB 0x168230 |
| /* [RW 32] NA */ |
| #define QM_REG_FUNCNUMSEL_MSB 0x16822c |
| /* [RW 32] A mask register to mask the Almost empty signals which will not |
| be use for the almost empty indication to the HW block; queues 31:0 */ |
| #define QM_REG_HWAEMPTYMASK_LSB 0x168218 |
| /* [RW 32] A mask register to mask the Almost empty signals which will not |
| be use for the almost empty indication to the HW block; queues 95-64 */ |
| #define QM_REG_HWAEMPTYMASK_LSB_EXT_A 0x16e510 |
| /* [RW 32] A mask register to mask the Almost empty signals which will not |
| be use for the almost empty indication to the HW block; queues 63:32 */ |
| #define QM_REG_HWAEMPTYMASK_MSB 0x168214 |
| /* [RW 32] A mask register to mask the Almost empty signals which will not |
| be use for the almost empty indication to the HW block; queues 127-96 */ |
| #define QM_REG_HWAEMPTYMASK_MSB_EXT_A 0x16e50c |
| /* [RW 4] The number of outstanding request to CFC */ |
| #define QM_REG_OUTLDREQ 0x168804 |
| /* [RC 1] A flag to indicate that overflow error occurred in one of the |
| queues. */ |
| #define QM_REG_OVFERROR 0x16805c |
| /* [RC 7] the Q where the overflow occurs */ |
| #define QM_REG_OVFQNUM 0x168058 |
| /* [R 16] Pause state for physical queues 15-0 */ |
| #define QM_REG_PAUSESTATE0 0x168410 |
| /* [R 16] Pause state for physical queues 31-16 */ |
| #define QM_REG_PAUSESTATE1 0x168414 |
| /* [R 16] Pause state for physical queues 47-32 */ |
| #define QM_REG_PAUSESTATE2 0x16e684 |
| /* [R 16] Pause state for physical queues 63-48 */ |
| #define QM_REG_PAUSESTATE3 0x16e688 |
| /* [R 16] Pause state for physical queues 79-64 */ |
| #define QM_REG_PAUSESTATE4 0x16e68c |
| /* [R 16] Pause state for physical queues 95-80 */ |
| #define QM_REG_PAUSESTATE5 0x16e690 |
| /* [R 16] Pause state for physical queues 111-96 */ |
| #define QM_REG_PAUSESTATE6 0x16e694 |
| /* [R 16] Pause state for physical queues 127-112 */ |
| #define QM_REG_PAUSESTATE7 0x16e698 |
| /* [RW 2] The PCI attributes field used in the PCI request. */ |
| #define QM_REG_PCIREQAT 0x168054 |
| #define QM_REG_PF_EN 0x16e70c |
| /* [R 24] The number of tasks stored in the QM for the PF. only even |
| * functions are valid in E2 (odd I registers will be hard wired to 0) */ |
| #define QM_REG_PF_USG_CNT_0 0x16e040 |
| /* [R 16] NOT USED */ |
| #define QM_REG_PORT0BYTECRD 0x168300 |
| /* [R 16] The byte credit of port 1 */ |
| #define QM_REG_PORT1BYTECRD 0x168304 |
| /* [RW 3] pci function number of queues 15-0 */ |
| #define QM_REG_PQ2PCIFUNC_0 0x16e6bc |
| #define QM_REG_PQ2PCIFUNC_1 0x16e6c0 |
| #define QM_REG_PQ2PCIFUNC_2 0x16e6c4 |
| #define QM_REG_PQ2PCIFUNC_3 0x16e6c8 |
| #define QM_REG_PQ2PCIFUNC_4 0x16e6cc |
| #define QM_REG_PQ2PCIFUNC_5 0x16e6d0 |
| #define QM_REG_PQ2PCIFUNC_6 0x16e6d4 |
| #define QM_REG_PQ2PCIFUNC_7 0x16e6d8 |
| /* [WB 54] Pointer Table Memory for queues 63-0; The mapping is as follow: |
| ptrtbl[53:30] read pointer; ptrtbl[29:6] write pointer; ptrtbl[5:4] read |
| bank0; ptrtbl[3:2] read bank 1; ptrtbl[1:0] write bank; */ |
| #define QM_REG_PTRTBL 0x168a00 |
| /* [WB 54] Pointer Table Memory for queues 127-64; The mapping is as follow: |
| ptrtbl[53:30] read pointer; ptrtbl[29:6] write pointer; ptrtbl[5:4] read |
| bank0; ptrtbl[3:2] read bank 1; ptrtbl[1:0] write bank; */ |
| #define QM_REG_PTRTBL_EXT_A 0x16e200 |
| /* [RW 2] Interrupt mask register #0 read/write */ |
| #define QM_REG_QM_INT_MASK 0x168444 |
| /* [R 2] Interrupt register #0 read */ |
| #define QM_REG_QM_INT_STS 0x168438 |
| /* [RW 12] Parity mask register #0 read/write */ |
| #define QM_REG_QM_PRTY_MASK 0x168454 |
| /* [R 12] Parity register #0 read */ |
| #define QM_REG_QM_PRTY_STS 0x168448 |
| /* [RC 12] Parity register #0 read clear */ |
| #define QM_REG_QM_PRTY_STS_CLR 0x16844c |
| /* [R 32] Current queues in pipeline: Queues from 32 to 63 */ |
| #define QM_REG_QSTATUS_HIGH 0x16802c |
| /* [R 32] Current queues in pipeline: Queues from 96 to 127 */ |
| #define QM_REG_QSTATUS_HIGH_EXT_A 0x16e408 |
| /* [R 32] Current queues in pipeline: Queues from 0 to 31 */ |
| #define QM_REG_QSTATUS_LOW 0x168028 |
| /* [R 32] Current queues in pipeline: Queues from 64 to 95 */ |
| #define QM_REG_QSTATUS_LOW_EXT_A 0x16e404 |
| /* [R 24] The number of tasks queued for each queue; queues 63-0 */ |
| #define QM_REG_QTASKCTR_0 0x168308 |
| /* [R 24] The number of tasks queued for each queue; queues 127-64 */ |
| #define QM_REG_QTASKCTR_EXT_A_0 0x16e584 |
| /* [RW 4] Queue tied to VOQ */ |
| #define QM_REG_QVOQIDX_0 0x1680f4 |
| #define QM_REG_QVOQIDX_10 0x16811c |
| #define QM_REG_QVOQIDX_100 0x16e49c |
| #define QM_REG_QVOQIDX_101 0x16e4a0 |
| #define QM_REG_QVOQIDX_102 0x16e4a4 |
| #define QM_REG_QVOQIDX_103 0x16e4a8 |
| #define QM_REG_QVOQIDX_104 0x16e4ac |
| #define QM_REG_QVOQIDX_105 0x16e4b0 |
| #define QM_REG_QVOQIDX_106 0x16e4b4 |
| #define QM_REG_QVOQIDX_107 0x16e4b8 |
| #define QM_REG_QVOQIDX_108 0x16e4bc |
| #define QM_REG_QVOQIDX_109 0x16e4c0 |
| #define QM_REG_QVOQIDX_11 0x168120 |
| #define QM_REG_QVOQIDX_110 0x16e4c4 |
| #define QM_REG_QVOQIDX_111 0x16e4c8 |
| #define QM_REG_QVOQIDX_112 0x16e4cc |
| #define QM_REG_QVOQIDX_113 0x16e4d0 |
| #define QM_REG_QVOQIDX_114 0x16e4d4 |
| #define QM_REG_QVOQIDX_115 0x16e4d8 |
| #define QM_REG_QVOQIDX_116 0x16e4dc |
| #define QM_REG_QVOQIDX_117 0x16e4e0 |
| #define QM_REG_QVOQIDX_118 0x16e4e4 |
| #define QM_REG_QVOQIDX_119 0x16e4e8 |
| #define QM_REG_QVOQIDX_12 0x168124 |
| #define QM_REG_QVOQIDX_120 0x16e4ec |
| #define QM_REG_QVOQIDX_121 0x16e4f0 |
| #define QM_REG_QVOQIDX_122 0x16e4f4 |
| #define QM_REG_QVOQIDX_123 0x16e4f8 |
| #define QM_REG_QVOQIDX_124 0x16e4fc |
| #define QM_REG_QVOQIDX_125 0x16e500 |
| #define QM_REG_QVOQIDX_126 0x16e504 |
| #define QM_REG_QVOQIDX_127 0x16e508 |
| #define QM_REG_QVOQIDX_13 0x168128 |
| #define QM_REG_QVOQIDX_14 0x16812c |
| #define QM_REG_QVOQIDX_15 0x168130 |
| #define QM_REG_QVOQIDX_16 0x168134 |
| #define QM_REG_QVOQIDX_17 0x168138 |
| #define QM_REG_QVOQIDX_21 0x168148 |
| #define QM_REG_QVOQIDX_22 0x16814c |
| #define QM_REG_QVOQIDX_23 0x168150 |
| #define QM_REG_QVOQIDX_24 0x168154 |
| #define QM_REG_QVOQIDX_25 0x168158 |
| #define QM_REG_QVOQIDX_26 0x16815c |
| #define QM_REG_QVOQIDX_27 0x168160 |
| #define QM_REG_QVOQIDX_28 0x168164 |
| #define QM_REG_QVOQIDX_29 0x168168 |
| #define QM_REG_QVOQIDX_30 0x16816c |
| #define QM_REG_QVOQIDX_31 0x168170 |
| #define QM_REG_QVOQIDX_32 0x168174 |
| #define QM_REG_QVOQIDX_33 0x168178 |
| #define QM_REG_QVOQIDX_34 0x16817c |
| #define QM_REG_QVOQIDX_35 0x168180 |
| #define QM_REG_QVOQIDX_36 0x168184 |
| #define QM_REG_QVOQIDX_37 0x168188 |
| #define QM_REG_QVOQIDX_38 0x16818c |
| #define QM_REG_QVOQIDX_39 0x168190 |
| #define QM_REG_QVOQIDX_40 0x168194 |
| #define QM_REG_QVOQIDX_41 0x168198 |
| #define QM_REG_QVOQIDX_42 0x16819c |
| #define QM_REG_QVOQIDX_43 0x1681a0 |
| #define QM_REG_QVOQIDX_44 0x1681a4 |
| #define QM_REG_QVOQIDX_45 0x1681a8 |
| #define QM_REG_QVOQIDX_46 0x1681ac |
| #define QM_REG_QVOQIDX_47 0x1681b0 |
| #define QM_REG_QVOQIDX_48 0x1681b4 |
| #define QM_REG_QVOQIDX_49 0x1681b8 |
| #define QM_REG_QVOQIDX_5 0x168108 |
| #define QM_REG_QVOQIDX_50 0x1681bc |
| #define QM_REG_QVOQIDX_51 0x1681c0 |
| #define QM_REG_QVOQIDX_52 0x1681c4 |
| #define QM_REG_QVOQIDX_53 0x1681c8 |
| #define QM_REG_QVOQIDX_54 0x1681cc |
| #define QM_REG_QVOQIDX_55 0x1681d0 |
| #define QM_REG_QVOQIDX_56 0x1681d4 |
| #define QM_REG_QVOQIDX_57 0x1681d8 |
| #define QM_REG_QVOQIDX_58 0x1681dc |
| #define QM_REG_QVOQIDX_59 0x1681e0 |
| #define QM_REG_QVOQIDX_6 0x16810c |
| #define QM_REG_QVOQIDX_60 0x1681e4 |
| #define QM_REG_QVOQIDX_61 0x1681e8 |
| #define QM_REG_QVOQIDX_62 0x1681ec |
| #define QM_REG_QVOQIDX_63 0x1681f0 |
| #define QM_REG_QVOQIDX_64 0x16e40c |
| #define QM_REG_QVOQIDX_65 0x16e410 |
| #define QM_REG_QVOQIDX_69 0x16e420 |
| #define QM_REG_QVOQIDX_7 0x168110 |
| #define QM_REG_QVOQIDX_70 0x16e424 |
| #define QM_REG_QVOQIDX_71 0x16e428 |
| #define QM_REG_QVOQIDX_72 0x16e42c |
| #define QM_REG_QVOQIDX_73 0x16e430 |
| #define QM_REG_QVOQIDX_74 0x16e434 |
| #define QM_REG_QVOQIDX_75 0x16e438 |
| #define QM_REG_QVOQIDX_76 0x16e43c |
| #define QM_REG_QVOQIDX_77 0x16e440 |
| #define QM_REG_QVOQIDX_78 0x16e444 |
| #define QM_REG_QVOQIDX_79 0x16e448 |
| #define QM_REG_QVOQIDX_8 0x168114 |
| #define QM_REG_QVOQIDX_80 0x16e44c |
| #define QM_REG_QVOQIDX_81 0x16e450 |
| #define QM_REG_QVOQIDX_85 0x16e460 |
| #define QM_REG_QVOQIDX_86 0x16e464 |
| #define QM_REG_QVOQIDX_87 0x16e468 |
| #define QM_REG_QVOQIDX_88 0x16e46c |
| #define QM_REG_QVOQIDX_89 0x16e470 |
| #define QM_REG_QVOQIDX_9 0x168118 |
| #define QM_REG_QVOQIDX_90 0x16e474 |
| #define QM_REG_QVOQIDX_91 0x16e478 |
| #define QM_REG_QVOQIDX_92 0x16e47c |
| #define QM_REG_QVOQIDX_93 0x16e480 |
| #define QM_REG_QVOQIDX_94 0x16e484 |
| #define QM_REG_QVOQIDX_95 0x16e488 |
| #define QM_REG_QVOQIDX_96 0x16e48c |
| #define QM_REG_QVOQIDX_97 0x16e490 |
| #define QM_REG_QVOQIDX_98 0x16e494 |
| #define QM_REG_QVOQIDX_99 0x16e498 |
| /* [RW 1] Initialization bit command */ |
| #define QM_REG_SOFT_RESET 0x168428 |
| /* [RW 8] The credit cost per every task in the QM. A value per each VOQ */ |
| #define QM_REG_TASKCRDCOST_0 0x16809c |
| #define QM_REG_TASKCRDCOST_1 0x1680a0 |
| #define QM_REG_TASKCRDCOST_2 0x1680a4 |
| #define QM_REG_TASKCRDCOST_4 0x1680ac |
| #define QM_REG_TASKCRDCOST_5 0x1680b0 |
| /* [R 6] Keep the fill level of the fifo from write client 3 */ |
| #define QM_REG_TQM_WRC_FIFOLVL 0x168010 |
| /* [R 6] Keep the fill level of the fifo from write client 2 */ |
| #define QM_REG_UQM_WRC_FIFOLVL 0x168008 |
| /* [RC 32] Credit update error register */ |
| #define QM_REG_VOQCRDERRREG 0x168408 |
| /* [R 16] The credit value for each VOQ */ |
| #define QM_REG_VOQCREDIT_0 0x1682d0 |
| #define QM_REG_VOQCREDIT_1 0x1682d4 |
| #define QM_REG_VOQCREDIT_4 0x1682e0 |
| /* [RW 16] The credit value that if above the QM is considered almost full */ |
| #define QM_REG_VOQCREDITAFULLTHR 0x168090 |
| /* [RW 16] The init and maximum credit for each VoQ */ |
| #define QM_REG_VOQINITCREDIT_0 0x168060 |
| #define QM_REG_VOQINITCREDIT_1 0x168064 |
| #define QM_REG_VOQINITCREDIT_2 0x168068 |
| #define QM_REG_VOQINITCREDIT_4 0x168070 |
| #define QM_REG_VOQINITCREDIT_5 0x168074 |
| /* [RW 1] The port of which VOQ belongs */ |
| #define QM_REG_VOQPORT_0 0x1682a0 |
| #define QM_REG_VOQPORT_1 0x1682a4 |
| #define QM_REG_VOQPORT_2 0x1682a8 |
| /* [RW 32] The physical queue number associated with each VOQ; queues 31-0 */ |
| #define QM_REG_VOQQMASK_0_LSB 0x168240 |
| /* [RW 32] The physical queue number associated with each VOQ; queues 95-64 */ |
| #define QM_REG_VOQQMASK_0_LSB_EXT_A 0x16e524 |
| /* [RW 32] The physical queue number associated with each VOQ; queues 63-32 */ |
| #define QM_REG_VOQQMASK_0_MSB 0x168244 |
| /* [RW 32] The physical queue number associated with each VOQ; queues 127-96 */ |
| #define QM_REG_VOQQMASK_0_MSB_EXT_A 0x16e528 |
| /* [RW 32] The physical queue number associated with each VOQ; queues 31-0 */ |
| #define QM_REG_VOQQMASK_10_LSB 0x168290 |
| /* [RW 32] The physical queue number associated with each VOQ; queues 95-64 */ |
| #define QM_REG_VOQQMASK_10_LSB_EXT_A 0x16e574 |
| /* [RW 32] The physical queue number associated with each VOQ; queues 63-32 */ |
| #define QM_REG_VOQQMASK_10_MSB 0x168294 |
| /* [RW 32] The physical queue number associated with each VOQ; queues 127-96 */ |
| #define QM_REG_VOQQMASK_10_MSB_EXT_A 0x16e578 |
| /* [RW 32] The physical queue number associated with each VOQ; queues 31-0 */ |
| #define QM_REG_VOQQMASK_11_LSB 0x168298 |
| /* [RW 32] The physical queue number associated with each VOQ; queues 95-64 */ |
| #define QM_REG_VOQQMASK_11_LSB_EXT_A 0x16e57c |
| /* [RW 32] The physical queue number associated with each VOQ; queues 63-32 */ |
| #define QM_REG_VOQQMASK_11_MSB 0x16829c |
| /* [RW 32] The physical queue number associated with each VOQ; queues 127-96 */ |
| #define QM_REG_VOQQMASK_11_MSB_EXT_A 0x16e580 |
| /* [RW 32] The physical queue number associated with each VOQ; queues 31-0 */ |
| #define QM_REG_VOQQMASK_1_LSB 0x168248 |
| /* [RW 32] The physical queue number associated with each VOQ; queues 95-64 */ |
| #define QM_REG_VOQQMASK_1_LSB_EXT_A 0x16e52c |
| /* [RW 32] The physical queue number associated with each VOQ; queues 63-32 */ |
| #define QM_REG_VOQQMASK_1_MSB 0x16824c |
| /* [RW 32] The physical queue number associated with each VOQ; queues 127-96 */ |
| #define QM_REG_VOQQMASK_1_MSB_EXT_A 0x16e530 |
| /* [RW 32] The physical queue number associated with each VOQ; queues 31-0 */ |
| #define QM_REG_VOQQMASK_2_LSB 0x168250 |
| /* [RW 32] The physical queue number associated with each VOQ; queues 95-64 */ |
| #define QM_REG_VOQQMASK_2_LSB_EXT_A 0x16e534 |
| /* [RW 32] The physical queue number associated with each VOQ; queues 63-32 */ |
| #define QM_REG_VOQQMASK_2_MSB 0x168254 |
| /* [RW 32] The physical queue number associated with each VOQ; queues 127-96 */ |
| #define QM_REG_VOQQMASK_2_MSB_EXT_A 0x16e538 |
| /* [RW 32] The physical queue number associated with each VOQ; queues 31-0 */ |
| #define QM_REG_VOQQMASK_3_LSB 0x168258 |
| /* [RW 32] The physical queue number associated with each VOQ; queues 95-64 */ |
| #define QM_REG_VOQQMASK_3_LSB_EXT_A 0x16e53c |
| /* [RW 32] The physical queue number associated with each VOQ; queues 127-96 */ |
| #define QM_REG_VOQQMASK_3_MSB_EXT_A 0x16e540 |
| /* [RW 32] The physical queue number associated with each VOQ; queues 31-0 */ |
| #define QM_REG_VOQQMASK_4_LSB 0x168260 |
| /* [RW 32] The physical queue number associated with each VOQ; queues 95-64 */ |
| #define QM_REG_VOQQMASK_4_LSB_EXT_A 0x16e544 |
| /* [RW 32] The physical queue number associated with each VOQ; queues 63-32 */ |
| #define QM_REG_VOQQMASK_4_MSB 0x168264 |
| /* [RW 32] The physical queue number associated with each VOQ; queues 127-96 */ |
| #define QM_REG_VOQQMASK_4_MSB_EXT_A 0x16e548 |
| /* [RW 32] The physical queue number associated with each VOQ; queues 31-0 */ |
| #define QM_REG_VOQQMASK_5_LSB 0x168268 |
| /* [RW 32] The physical queue number associated with each VOQ; queues 95-64 */ |
| #define QM_REG_VOQQMASK_5_LSB_EXT_A 0x16e54c |
| /* [RW 32] The physical queue number associated with each VOQ; queues 63-32 */ |
| #define QM_REG_VOQQMASK_5_MSB 0x16826c |
| /* [RW 32] The physical queue number associated with each VOQ; queues 127-96 */ |
| #define QM_REG_VOQQMASK_5_MSB_EXT_A 0x16e550 |
| /* [RW 32] The physical queue number associated with each VOQ; queues 31-0 */ |
| #define QM_REG_VOQQMASK_6_LSB 0x168270 |
| /* [RW 32] The physical queue number associated with each VOQ; queues 95-64 */ |
| #define QM_REG_VOQQMASK_6_LSB_EXT_A 0x16e554 |
| /* [RW 32] The physical queue number associated with each VOQ; queues 63-32 */ |
| #define QM_REG_VOQQMASK_6_MSB 0x168274 |
| /* [RW 32] The physical queue number associated with each VOQ; queues 127-96 */ |
| #define QM_REG_VOQQMASK_6_MSB_EXT_A 0x16e558 |
| /* [RW 32] The physical queue number associated with each VOQ; queues 31-0 */ |
| #define QM_REG_VOQQMASK_7_LSB 0x168278 |
| /* [RW 32] The physical queue number associated with each VOQ; queues 95-64 */ |
| #define QM_REG_VOQQMASK_7_LSB_EXT_A 0x16e55c |
| /* [RW 32] The physical queue number associated with each VOQ; queues 63-32 */ |
| #define QM_REG_VOQQMASK_7_MSB 0x16827c |
| /* [RW 32] The physical queue number associated with each VOQ; queues 127-96 */ |
| #define QM_REG_VOQQMASK_7_MSB_EXT_A 0x16e560 |
| /* [RW 32] The physical queue number associated with each VOQ; queues 31-0 */ |
| #define QM_REG_VOQQMASK_8_LSB 0x168280 |
| /* [RW 32] The physical queue number associated with each VOQ; queues 95-64 */ |
| #define QM_REG_VOQQMASK_8_LSB_EXT_A 0x16e564 |
| /* [RW 32] The physical queue number associated with each VOQ; queues 63-32 */ |
| #define QM_REG_VOQQMASK_8_MSB 0x168284 |
| /* [RW 32] The physical queue number associated with each VOQ; queues 127-96 */ |
| #define QM_REG_VOQQMASK_8_MSB_EXT_A 0x16e568 |
| /* [RW 32] The physical queue number associated with each VOQ; queues 31-0 */ |
| #define QM_REG_VOQQMASK_9_LSB 0x168288 |
| /* [RW 32] The physical queue number associated with each VOQ; queues 95-64 */ |
| #define QM_REG_VOQQMASK_9_LSB_EXT_A 0x16e56c |
| /* [RW 32] The physical queue number associated with each VOQ; queues 127-96 */ |
| #define QM_REG_VOQQMASK_9_MSB_EXT_A 0x16e570 |
| /* [RW 32] Wrr weights */ |
| #define QM_REG_WRRWEIGHTS_0 0x16880c |
| #define QM_REG_WRRWEIGHTS_1 0x168810 |
| #define QM_REG_WRRWEIGHTS_10 0x168814 |
| #define QM_REG_WRRWEIGHTS_11 0x168818 |
| #define QM_REG_WRRWEIGHTS_12 0x16881c |
| #define QM_REG_WRRWEIGHTS_13 0x168820 |
| #define QM_REG_WRRWEIGHTS_14 0x168824 |
| #define QM_REG_WRRWEIGHTS_15 0x168828 |
| #define QM_REG_WRRWEIGHTS_16 0x16e000 |
| #define QM_REG_WRRWEIGHTS_17 0x16e004 |
| #define QM_REG_WRRWEIGHTS_18 0x16e008 |
| #define QM_REG_WRRWEIGHTS_19 0x16e00c |
| #define QM_REG_WRRWEIGHTS_2 0x16882c |
| #define QM_REG_WRRWEIGHTS_20 0x16e010 |
| #define QM_REG_WRRWEIGHTS_21 0x16e014 |
| #define QM_REG_WRRWEIGHTS_22 0x16e018 |
| #define QM_REG_WRRWEIGHTS_23 0x16e01c |
| #define QM_REG_WRRWEIGHTS_24 0x16e020 |
| #define QM_REG_WRRWEIGHTS_25 0x16e024 |
| #define QM_REG_WRRWEIGHTS_26 0x16e028 |
| #define QM_REG_WRRWEIGHTS_27 0x16e02c |
| #define QM_REG_WRRWEIGHTS_28 0x16e030 |
| #define QM_REG_WRRWEIGHTS_29 0x16e034 |
| #define QM_REG_WRRWEIGHTS_3 0x168830 |
| #define QM_REG_WRRWEIGHTS_30 0x16e038 |
| #define QM_REG_WRRWEIGHTS_31 0x16e03c |
| #define QM_REG_WRRWEIGHTS_4 0x168834 |
| #define QM_REG_WRRWEIGHTS_5 0x168838 |
| #define QM_REG_WRRWEIGHTS_6 0x16883c |
| #define QM_REG_WRRWEIGHTS_7 0x168840 |
| #define QM_REG_WRRWEIGHTS_8 0x168844 |
| #define QM_REG_WRRWEIGHTS_9 0x168848 |
| /* [R 6] Keep the fill level of the fifo from write client 1 */ |
| #define QM_REG_XQM_WRC_FIFOLVL 0x168000 |
| /* [W 1] reset to parity interrupt */ |
| #define SEM_FAST_REG_PARITY_RST 0x18840 |
| #define SRC_REG_COUNTFREE0 0x40500 |
| /* [RW 1] If clr the searcher is compatible to E1 A0 - support only two |
| ports. If set the searcher support 8 functions. */ |
| #define SRC_REG_E1HMF_ENABLE 0x404cc |
| #define SRC_REG_FIRSTFREE0 0x40510 |
| #define SRC_REG_KEYRSS0_0 0x40408 |
| #define SRC_REG_KEYRSS0_7 0x40424 |
| #define SRC_REG_KEYRSS1_9 0x40454 |
| #define SRC_REG_KEYSEARCH_0 0x40458 |
| #define SRC_REG_KEYSEARCH_1 0x4045c |
| #define SRC_REG_KEYSEARCH_2 0x40460 |
| #define SRC_REG_KEYSEARCH_3 0x40464 |
| #define SRC_REG_KEYSEARCH_4 0x40468 |
| #define SRC_REG_KEYSEARCH_5 0x4046c |
| #define SRC_REG_KEYSEARCH_6 0x40470 |
| #define SRC_REG_KEYSEARCH_7 0x40474 |
| #define SRC_REG_KEYSEARCH_8 0x40478 |
| #define SRC_REG_KEYSEARCH_9 0x4047c |
| #define SRC_REG_LASTFREE0 0x40530 |
| #define SRC_REG_NUMBER_HASH_BITS0 0x40400 |
| /* [RW 1] Reset internal state machines. */ |
| #define SRC_REG_SOFT_RST 0x4049c |
| /* [R 3] Interrupt register #0 read */ |
| #define SRC_REG_SRC_INT_STS 0x404ac |
| /* [RW 3] Parity mask register #0 read/write */ |
| #define SRC_REG_SRC_PRTY_MASK 0x404c8 |
| /* [R 3] Parity register #0 read */ |
| #define SRC_REG_SRC_PRTY_STS 0x404bc |
| /* [RC 3] Parity register #0 read clear */ |
| #define SRC_REG_SRC_PRTY_STS_CLR 0x404c0 |
| /* [R 4] Used to read the value of the XX protection CAM occupancy counter. */ |
| #define TCM_REG_CAM_OCCUP 0x5017c |
| /* [RW 1] CDU AG read Interface enable. If 0 - the request input is |
| disregarded; valid output is deasserted; all other signals are treated as |
| usual; if 1 - normal activity. */ |
| #define TCM_REG_CDU_AG_RD_IFEN 0x50034 |
| /* [RW 1] CDU AG write Interface enable. If 0 - the request and valid input |
| are disregarded; all other signals are treated as usual; if 1 - normal |
| activity. */ |
| #define TCM_REG_CDU_AG_WR_IFEN 0x50030 |
| /* [RW 1] CDU STORM read Interface enable. If 0 - the request input is |
| disregarded; valid output is deasserted; all other signals are treated as |
| usual; if 1 - normal activity. */ |
| #define TCM_REG_CDU_SM_RD_IFEN 0x5003c |
| /* [RW 1] CDU STORM write Interface enable. If 0 - the request and valid |
| input is disregarded; all other signals are treated as usual; if 1 - |
| normal activity. */ |
| #define TCM_REG_CDU_SM_WR_IFEN 0x50038 |
| /* [RW 4] CFC output initial credit. Max credit available - 15.Write writes |
| the initial credit value; read returns the current value of the credit |
| counter. Must be initialized to 1 at start-up. */ |
| #define TCM_REG_CFC_INIT_CRD 0x50204 |
| /* [RW 3] The weight of the CP input in the WRR mechanism. 0 stands for |
| weight 8 (the most prioritised); 1 stands for weight 1(least |
| prioritised); 2 stands for weight 2; tc. */ |
| #define TCM_REG_CP_WEIGHT 0x500c0 |
| /* [RW 1] Input csem Interface enable. If 0 - the valid input is |
| disregarded; acknowledge output is deasserted; all other signals are |
| treated as usual; if 1 - normal activity. */ |
| #define TCM_REG_CSEM_IFEN 0x5002c |
| /* [RC 1] Message length mismatch (relative to last indication) at the In#9 |
| interface. */ |
| #define TCM_REG_CSEM_LENGTH_MIS 0x50174 |
| /* [RW 3] The weight of the input csem in the WRR mechanism. 0 stands for |
| weight 8 (the most prioritised); 1 stands for weight 1(least |
| prioritised); 2 stands for weight 2; tc. */ |
| #define TCM_REG_CSEM_WEIGHT 0x500bc |
| /* [RW 8] The Event ID in case of ErrorFlg is set in the input message. */ |
| #define TCM_REG_ERR_EVNT_ID 0x500a0 |
| /* [RW 28] The CM erroneous header for QM and Timers formatting. */ |
| #define TCM_REG_ERR_TCM_HDR 0x5009c |
| /* [RW 8] The Event ID for Timers expiration. */ |
| #define TCM_REG_EXPR_EVNT_ID 0x500a4 |
| /* [RW 8] FIC0 output initial credit. Max credit available - 255.Write |
| writes the initial credit value; read returns the current value of the |
| credit counter. Must be initialized to 64 at start-up. */ |
| #define TCM_REG_FIC0_INIT_CRD 0x5020c |
| /* [RW 8] FIC1 output initial credit. Max credit available - 255.Write |
| writes the initial credit value; read returns the current value of the |
| credit counter. Must be initialized to 64 at start-up. */ |
| #define TCM_REG_FIC1_INIT_CRD 0x50210 |
| /* [RW 1] Arbitration between Input Arbiter groups: 0 - fair Round-Robin; 1 |
| - strict priority defined by ~tcm_registers_gr_ag_pr.gr_ag_pr; |
| ~tcm_registers_gr_ld0_pr.gr_ld0_pr and |
| ~tcm_registers_gr_ld1_pr.gr_ld1_pr. */ |
| #define TCM_REG_GR_ARB_TYPE 0x50114 |
| /* [RW 2] Load (FIC0) channel group priority. The lowest priority is 0; the |
| highest priority is 3. It is supposed that the Store channel is the |
| compliment of the other 3 groups. */ |
| #define TCM_REG_GR_LD0_PR 0x5011c |
| /* [RW 2] Load (FIC1) channel group priority. The lowest priority is 0; the |
| highest priority is 3. It is supposed that the Store channel is the |
| compliment of the other 3 groups. */ |
| #define TCM_REG_GR_LD1_PR 0x50120 |
| /* [RW 4] The number of double REG-pairs; loaded from the STORM context and |
| sent to STORM; for a specific connection type. The double REG-pairs are |
| used to align to STORM context row size of 128 bits. The offset of these |
| data in the STORM context is always 0. Index _i stands for the connection |
| type (one of 16). */ |
| #define TCM_REG_N_SM_CTX_LD_0 0x50050 |
| #define TCM_REG_N_SM_CTX_LD_1 0x50054 |
| #define TCM_REG_N_SM_CTX_LD_2 0x50058 |
| #define TCM_REG_N_SM_CTX_LD_3 0x5005c |
| #define TCM_REG_N_SM_CTX_LD_4 0x50060 |
| #define TCM_REG_N_SM_CTX_LD_5 0x50064 |
| /* [RW 1] Input pbf Interface enable. If 0 - the valid input is disregarded; |
| acknowledge output is deasserted; all other signals are treated as usual; |
| if 1 - normal activity. */ |
| #define TCM_REG_PBF_IFEN 0x50024 |
| /* [RC 1] Message length mismatch (relative to last indication) at the In#7 |
| interface. */ |
| #define TCM_REG_PBF_LENGTH_MIS 0x5016c |
| /* [RW 3] The weight of the input pbf in the WRR mechanism. 0 stands for |
| weight 8 (the most prioritised); 1 stands for weight 1(least |
| prioritised); 2 stands for weight 2; tc. */ |
| #define TCM_REG_PBF_WEIGHT 0x500b4 |
| #define TCM_REG_PHYS_QNUM0_0 0x500e0 |
| #define TCM_REG_PHYS_QNUM0_1 0x500e4 |
| #define TCM_REG_PHYS_QNUM1_0 0x500e8 |
| #define TCM_REG_PHYS_QNUM1_1 0x500ec |
| #define TCM_REG_PHYS_QNUM2_0 0x500f0 |
| #define TCM_REG_PHYS_QNUM2_1 0x500f4 |
| #define TCM_REG_PHYS_QNUM3_0 0x500f8 |
| #define TCM_REG_PHYS_QNUM3_1 0x500fc |
| /* [RW 1] Input prs Interface enable. If 0 - the valid input is disregarded; |
| acknowledge output is deasserted; all other signals are treated as usual; |
| if 1 - normal activity. */ |
| #define TCM_REG_PRS_IFEN 0x50020 |
| /* [RC 1] Message length mismatch (relative to last indication) at the In#6 |
| interface. */ |
| #define TCM_REG_PRS_LENGTH_MIS 0x50168 |
| /* [RW 3] The weight of the input prs in the WRR mechanism. 0 stands for |
| weight 8 (the most prioritised); 1 stands for weight 1(least |
| prioritised); 2 stands for weight 2; tc. */ |
| #define TCM_REG_PRS_WEIGHT 0x500b0 |
| /* [RW 8] The Event ID for Timers formatting in case of stop done. */ |
| #define TCM_REG_STOP_EVNT_ID 0x500a8 |
| /* [RC 1] Message length mismatch (relative to last indication) at the STORM |
| interface. */ |
| #define TCM_REG_STORM_LENGTH_MIS 0x50160 |
| /* [RW 1] STORM - CM Interface enable. If 0 - the valid input is |
| disregarded; acknowledge output is deasserted; all other signals are |
| treated as usual; if 1 - normal activity. */ |
| #define TCM_REG_STORM_TCM_IFEN 0x50010 |
| /* [RW 3] The weight of the STORM input in the WRR mechanism. 0 stands for |
| weight 8 (the most prioritised); 1 stands for weight 1(least |
| prioritised); 2 stands for weight 2; tc. */ |
| #define TCM_REG_STORM_WEIGHT 0x500ac |
| /* [RW 1] CM - CFC Interface enable. If 0 - the valid input is disregarded; |
| acknowledge output is deasserted; all other signals are treated as usual; |
| if 1 - normal activity. */ |
| #define TCM_REG_TCM_CFC_IFEN 0x50040 |
| /* [RW 11] Interrupt mask register #0 read/write */ |
| #define TCM_REG_TCM_INT_MASK 0x501dc |
| /* [R 11] Interrupt register #0 read */ |
| #define TCM_REG_TCM_INT_STS 0x501d0 |
| /* [RW 27] Parity mask register #0 read/write */ |
| #define TCM_REG_TCM_PRTY_MASK 0x501ec |
| /* [R 27] Parity register #0 read */ |
| #define TCM_REG_TCM_PRTY_STS 0x501e0 |
| /* [RC 27] Parity register #0 read clear */ |
| #define TCM_REG_TCM_PRTY_STS_CLR 0x501e4 |
| /* [RW 3] The size of AG context region 0 in REG-pairs. Designates the MS |
| REG-pair number (e.g. if region 0 is 6 REG-pairs; the value should be 5). |
| Is used to determine the number of the AG context REG-pairs written back; |
| when the input message Reg1WbFlg isn't set. */ |
| #define TCM_REG_TCM_REG0_SZ 0x500d8 |
| /* [RW 1] CM - STORM 0 Interface enable. If 0 - the acknowledge input is |
| disregarded; valid is deasserted; all other signals are treated as usual; |
| if 1 - normal activity. */ |
| #define TCM_REG_TCM_STORM0_IFEN 0x50004 |
| /* [RW 1] CM - STORM 1 Interface enable. If 0 - the acknowledge input is |
| disregarded; valid is deasserted; all other signals are treated as usual; |
| if 1 - normal activity. */ |
| #define TCM_REG_TCM_STORM1_IFEN 0x50008 |
| /* [RW 1] CM - QM Interface enable. If 0 - the acknowledge input is |
| disregarded; valid is deasserted; all other signals are treated as usual; |
| if 1 - normal activity. */ |
| #define TCM_REG_TCM_TQM_IFEN 0x5000c |
| /* [RW 1] If set the Q index; received from the QM is inserted to event ID. */ |
| #define TCM_REG_TCM_TQM_USE_Q 0x500d4 |
| /* [RW 28] The CM header for Timers expiration command. */ |
| #define TCM_REG_TM_TCM_HDR 0x50098 |
| /* [RW 1] Timers - CM Interface enable. If 0 - the valid input is |
| disregarded; acknowledge output is deasserted; all other signals are |
| treated as usual; if 1 - normal activity. */ |
| #define TCM_REG_TM_TCM_IFEN 0x5001c |
| /* [RW 3] The weight of the Timers input in the WRR mechanism. 0 stands for |
| weight 8 (the most prioritised); 1 stands for weight 1(least |
| prioritised); 2 stands for weight 2; tc. */ |
| #define TCM_REG_TM_WEIGHT 0x500d0 |
| /* [RW 6] QM output initial credit. Max credit available - 32.Write writes |
| the initial credit value; read returns the current value of the credit |
| counter. Must be initialized to 32 at start-up. */ |
| #define TCM_REG_TQM_INIT_CRD 0x5021c |
| /* [RW 3] The weight of the QM (primary) input in the WRR mechanism. 0 |
| stands for weight 8 (the most prioritised); 1 stands for weight 1(least |
| prioritised); 2 stands for weight 2; tc. */ |
| #define TCM_REG_TQM_P_WEIGHT 0x500c8 |
| /* [RW 3] The weight of the QM (secondary) input in the WRR mechanism. 0 |
| stands for weight 8 (the most prioritised); 1 stands for weight 1(least |
| prioritised); 2 stands for weight 2; tc. */ |
| #define TCM_REG_TQM_S_WEIGHT 0x500cc |
| /* [RW 28] The CM header value for QM request (primary). */ |
| #define TCM_REG_TQM_TCM_HDR_P 0x50090 |
| /* [RW 28] The CM header value for QM request (secondary). */ |
| #define TCM_REG_TQM_TCM_HDR_S 0x50094 |
| /* [RW 1] QM - CM Interface enable. If 0 - the valid input is disregarded; |
| acknowledge output is deasserted; all other signals are treated as usual; |
| if 1 - normal activity. */ |
| #define TCM_REG_TQM_TCM_IFEN 0x50014 |
| /* [RW 1] Input SDM Interface enable. If 0 - the valid input is disregarded; |
| acknowledge output is deasserted; all other signals are treated as usual; |
| if 1 - normal activity. */ |
| #define TCM_REG_TSDM_IFEN 0x50018 |
| /* [RC 1] Message length mismatch (relative to last indication) at the SDM |
| interface. */ |
| #define TCM_REG_TSDM_LENGTH_MIS 0x50164 |
| /* [RW 3] The weight of the SDM input in the WRR mechanism. 0 stands for |
| weight 8 (the most prioritised); 1 stands for weight 1(least |
| prioritised); 2 stands for weight 2; tc. */ |
| #define TCM_REG_TSDM_WEIGHT 0x500c4 |
| /* [RW 1] Input usem Interface enable. If 0 - the valid input is |
| disregarded; acknowledge output is deasserted; all other signals are |
| treated as usual; if 1 - normal activity. */ |
| #define TCM_REG_USEM_IFEN 0x50028 |
| /* [RC 1] Message length mismatch (relative to last indication) at the In#8 |
| interface. */ |
| #define TCM_REG_USEM_LENGTH_MIS 0x50170 |
| /* [RW 3] The weight of the input usem in the WRR mechanism. 0 stands for |
| weight 8 (the most prioritised); 1 stands for weight 1(least |
| prioritised); 2 stands for weight 2; tc. */ |
| #define TCM_REG_USEM_WEIGHT 0x500b8 |
| /* [RW 21] Indirect access to the descriptor table of the XX protection |
| mechanism. The fields are: [5:0] - length of the message; 15:6] - message |
| pointer; 20:16] - next pointer. */ |
| #define TCM_REG_XX_DESCR_TABLE 0x50280 |
| #define TCM_REG_XX_DESCR_TABLE_SIZE 29 |
| /* [R 6] Use to read the value of XX protection Free counter. */ |
| #define TCM_REG_XX_FREE 0x50178 |
| /* [RW 6] Initial value for the credit counter; responsible for fulfilling |
| of the Input Stage XX protection buffer by the XX protection pending |
| messages. Max credit available - 127.Write writes the initial credit |
| value; read returns the current value of the credit counter. Must be |
| initialized to 19 at start-up. */ |
| #define TCM_REG_XX_INIT_CRD 0x50220 |
| /* [RW 6] Maximum link list size (messages locked) per connection in the XX |
| protection. */ |
| #define TCM_REG_XX_MAX_LL_SZ 0x50044 |
| /* [RW 6] The maximum number of pending messages; which may be stored in XX |
| protection. ~tcm_registers_xx_free.xx_free is read on read. */ |
| #define TCM_REG_XX_MSG_NUM 0x50224 |
| /* [RW 8] The Event ID; sent to the STORM in case of XX overflow. */ |
| #define TCM_REG_XX_OVFL_EVNT_ID 0x50048 |
| /* [RW 16] Indirect access to the XX table of the XX protection mechanism. |
| The fields are:[4:0] - tail pointer; [10:5] - Link List size; 15:11] - |
| header pointer. */ |
| #define TCM_REG_XX_TABLE 0x50240 |
| /* [RW 4] Load value for cfc ac credit cnt. */ |
| #define TM_REG_CFC_AC_CRDCNT_VAL 0x164208 |
| /* [RW 4] Load value for cfc cld credit cnt. */ |
| #define TM_REG_CFC_CLD_CRDCNT_VAL 0x164210 |
| /* [RW 8] Client0 context region. */ |
| #define TM_REG_CL0_CONT_REGION 0x164030 |
| /* [RW 8] Client1 context region. */ |
| #define TM_REG_CL1_CONT_REGION 0x164034 |
| /* [RW 8] Client2 context region. */ |
| #define TM_REG_CL2_CONT_REGION 0x164038 |
| /* [RW 2] Client in High priority client number. */ |
| #define TM_REG_CLIN_PRIOR0_CLIENT 0x164024 |
| /* [RW 4] Load value for clout0 cred cnt. */ |
| #define TM_REG_CLOUT_CRDCNT0_VAL 0x164220 |
| /* [RW 4] Load value for clout1 cred cnt. */ |
| #define TM_REG_CLOUT_CRDCNT1_VAL 0x164228 |
| /* [RW 4] Load value for clout2 cred cnt. */ |
| #define TM_REG_CLOUT_CRDCNT2_VAL 0x164230 |
| /* [RW 1] Enable client0 input. */ |
| #define TM_REG_EN_CL0_INPUT 0x164008 |
| /* [RW 1] Enable client1 input. */ |
| #define TM_REG_EN_CL1_INPUT 0x16400c |
| /* [RW 1] Enable client2 input. */ |
| #define TM_REG_EN_CL2_INPUT 0x164010 |
| #define TM_REG_EN_LINEAR0_TIMER 0x164014 |
| /* [RW 1] Enable real time counter. */ |
| #define TM_REG_EN_REAL_TIME_CNT 0x1640d8 |
| /* [RW 1] Enable for Timers state machines. */ |
| #define TM_REG_EN_TIMERS 0x164000 |
| /* [RW 4] Load value for expiration credit cnt. CFC max number of |
| outstanding load requests for timers (expiration) context loading. */ |
| #define TM_REG_EXP_CRDCNT_VAL 0x164238 |
| /* [RW 32] Linear0 logic address. */ |
| #define TM_REG_LIN0_LOGIC_ADDR 0x164240 |
| /* [RW 18] Linear0 Max active cid (in banks of 32 entries). */ |
| #define TM_REG_LIN0_MAX_ACTIVE_CID 0x164048 |
| /* [ST 16] Linear0 Number of scans counter. */ |
| #define TM_REG_LIN0_NUM_SCANS 0x1640a0 |
| /* [WB 64] Linear0 phy address. */ |
| #define TM_REG_LIN0_PHY_ADDR 0x164270 |
| /* [RW 1] Linear0 physical address valid. */ |
| #define TM_REG_LIN0_PHY_ADDR_VALID 0x164248 |
| #define TM_REG_LIN0_SCAN_ON 0x1640d0 |
| /* [RW 24] Linear0 array scan timeout. */ |
| #define TM_REG_LIN0_SCAN_TIME 0x16403c |
| #define TM_REG_LIN0_VNIC_UC 0x164128 |
| /* [RW 32] Linear1 logic address. */ |
| #define TM_REG_LIN1_LOGIC_ADDR 0x164250 |
| /* [WB 64] Linear1 phy address. */ |
| #define TM_REG_LIN1_PHY_ADDR 0x164280 |
| /* [RW 1] Linear1 physical address valid. */ |
| #define TM_REG_LIN1_PHY_ADDR_VALID 0x164258 |
| /* [RW 6] Linear timer set_clear fifo threshold. */ |
| #define TM_REG_LIN_SETCLR_FIFO_ALFULL_THR 0x164070 |
| /* [RW 2] Load value for pci arbiter credit cnt. */ |
| #define TM_REG_PCIARB_CRDCNT_VAL 0x164260 |
| /* [RW 20] The amount of hardware cycles for each timer tick. */ |
| #define TM_REG_TIMER_TICK_SIZE 0x16401c |
| /* [RW 8] Timers Context region. */ |
| #define TM_REG_TM_CONTEXT_REGION 0x164044 |
| /* [RW 1] Interrupt mask register #0 read/write */ |
| #define TM_REG_TM_INT_MASK 0x1640fc |
| /* [R 1] Interrupt register #0 read */ |
| #define TM_REG_TM_INT_STS 0x1640f0 |
| /* [RW 7] Parity mask register #0 read/write */ |
| #define TM_REG_TM_PRTY_MASK 0x16410c |
| /* [RC 7] Parity register #0 read clear */ |
| #define TM_REG_TM_PRTY_STS_CLR 0x164104 |
| /* [RW 8] The event id for aggregated interrupt 0 */ |
| #define TSDM_REG_AGG_INT_EVENT_0 0x42038 |
| #define TSDM_REG_AGG_INT_EVENT_1 0x4203c |
| #define TSDM_REG_AGG_INT_EVENT_2 0x42040 |
| #define TSDM_REG_AGG_INT_EVENT_3 0x42044 |
| #define TSDM_REG_AGG_INT_EVENT_4 0x42048 |
| /* [RW 1] The T bit for aggregated interrupt 0 */ |
| #define TSDM_REG_AGG_INT_T_0 0x420b8 |
| #define TSDM_REG_AGG_INT_T_1 0x420bc |
| /* [RW 13] The start address in the internal RAM for the cfc_rsp lcid */ |
| #define TSDM_REG_CFC_RSP_START_ADDR 0x42008 |
| /* [RW 16] The maximum value of the completion counter #0 */ |
| #define TSDM_REG_CMP_COUNTER_MAX0 0x4201c |
| /* [RW 16] The maximum value of the completion counter #1 */ |
| #define TSDM_REG_CMP_COUNTER_MAX1 0x42020 |
| /* [RW 16] The maximum value of the completion counter #2 */ |
| #define TSDM_REG_CMP_COUNTER_MAX2 0x42024 |
| /* [RW 16] The maximum value of the completion counter #3 */ |
| #define TSDM_REG_CMP_COUNTER_MAX3 0x42028 |
| /* [RW 13] The start address in the internal RAM for the completion |
| counters. */ |
| #define TSDM_REG_CMP_COUNTER_START_ADDR 0x4200c |
| #define TSDM_REG_ENABLE_IN1 0x42238 |
| #define TSDM_REG_ENABLE_IN2 0x4223c |
| #define TSDM_REG_ENABLE_OUT1 0x42240 |
| #define TSDM_REG_ENABLE_OUT2 0x42244 |
| /* [RW 4] The initial number of messages that can be sent to the pxp control |
| interface without receiving any ACK. */ |
| #define TSDM_REG_INIT_CREDIT_PXP_CTRL 0x424bc |
| /* [ST 32] The number of ACK after placement messages received */ |
| #define TSDM_REG_NUM_OF_ACK_AFTER_PLACE 0x4227c |
| /* [ST 32] The number of packet end messages received from the parser */ |
| #define TSDM_REG_NUM_OF_PKT_END_MSG 0x42274 |
| /* [ST 32] The number of requests received from the pxp async if */ |
| #define TSDM_REG_NUM_OF_PXP_ASYNC_REQ 0x42278 |
| /* [ST 32] The number of commands received in queue 0 */ |
| #define TSDM_REG_NUM_OF_Q0_CMD 0x42248 |
| /* [ST 32] The number of commands received in queue 10 */ |
| #define TSDM_REG_NUM_OF_Q10_CMD 0x4226c |
| /* [ST 32] The number of commands received in queue 11 */ |
| #define TSDM_REG_NUM_OF_Q11_CMD 0x42270 |
| /* [ST 32] The number of commands received in queue 1 */ |
| #define TSDM_REG_NUM_OF_Q1_CMD 0x4224c |
| /* [ST 32] The number of commands received in queue 3 */ |
| #define TSDM_REG_NUM_OF_Q3_CMD 0x42250 |
| /* [ST 32] The number of commands received in queue 4 */ |
| #define TSDM_REG_NUM_OF_Q4_CMD 0x42254 |
| /* [ST 32] The number of commands received in queue 5 */ |
| #define TSDM_REG_NUM_OF_Q5_CMD 0x42258 |
| /* [ST 32] The number of commands received in queue 6 */ |
| #define TSDM_REG_NUM_OF_Q6_CMD 0x4225c |
| /* [ST 32] The number of commands received in queue 7 */ |
| #define TSDM_REG_NUM_OF_Q7_CMD 0x42260 |
| /* [ST 32] The number of commands received in queue 8 */ |
| #define TSDM_REG_NUM_OF_Q8_CMD 0x42264 |
| /* [ST 32] The number of commands received in queue 9 */ |
| #define TSDM_REG_NUM_OF_Q9_CMD 0x42268 |
| /* [RW 13] The start address in the internal RAM for the packet end message */ |
| #define TSDM_REG_PCK_END_MSG_START_ADDR 0x42014 |
| /* [RW 13] The start address in the internal RAM for queue counters */ |
| #define TSDM_REG_Q_COUNTER_START_ADDR 0x42010 |
| /* [R 1] pxp_ctrl rd_data fifo empty in sdm_dma_rsp block */ |
| #define TSDM_REG_RSP_PXP_CTRL_RDATA_EMPTY 0x42548 |
| /* [R 1] parser fifo empty in sdm_sync block */ |
| #define TSDM_REG_SYNC_PARSER_EMPTY 0x42550 |
| /* [R 1] parser serial fifo empty in sdm_sync block */ |
| #define TSDM_REG_SYNC_SYNC_EMPTY 0x42558 |
| /* [RW 32] Tick for timer counter. Applicable only when |
| ~tsdm_registers_timer_tick_enable.timer_tick_enable =1 */ |
| #define TSDM_REG_TIMER_TICK 0x42000 |
| /* [RW 32] Interrupt mask register #0 read/write */ |
| #define TSDM_REG_TSDM_INT_MASK_0 0x4229c |
| #define TSDM_REG_TSDM_INT_MASK_1 0x422ac |
| /* [R 32] Interrupt register #0 read */ |
| #define TSDM_REG_TSDM_INT_STS_0 0x42290 |
| #define TSDM_REG_TSDM_INT_STS_1 0x422a0 |
| /* [RW 11] Parity mask register #0 read/write */ |
| #define TSDM_REG_TSDM_PRTY_MASK 0x422bc |
| /* [R 11] Parity register #0 read */ |
| #define TSDM_REG_TSDM_PRTY_STS 0x422b0 |
| /* [RC 11] Parity register #0 read clear */ |
| #define TSDM_REG_TSDM_PRTY_STS_CLR 0x422b4 |
| /* [RW 5] The number of time_slots in the arbitration cycle */ |
| #define TSEM_REG_ARB_CYCLE_SIZE 0x180034 |
| /* [RW 3] The source that is associated with arbitration element 0. Source |
| decoding is: 0- foc0; 1-fic1; 2-sleeping thread with priority 0; 3- |
| sleeping thread with priority 1; 4- sleeping thread with priority 2 */ |
| #define TSEM_REG_ARB_ELEMENT0 0x180020 |
| /* [RW 3] The source that is associated with arbitration element 1. Source |
| decoding is: 0- foc0; 1-fic1; 2-sleeping thread with priority 0; 3- |
| sleeping thread with priority 1; 4- sleeping thread with priority 2. |
| Could not be equal to register ~tsem_registers_arb_element0.arb_element0 */ |
| #define TSEM_REG_ARB_ELEMENT1 0x180024 |
| /* [RW 3] The source that is associated with arbitration element 2. Source |
| decoding is: 0- foc0; 1-fic1; 2-sleeping thread with priority 0; 3- |
| sleeping thread with priority 1; 4- sleeping thread with priority 2. |
| Could not be equal to register ~tsem_registers_arb_element0.arb_element0 |
| and ~tsem_registers_arb_element1.arb_element1 */ |
| #define TSEM_REG_ARB_ELEMENT2 0x180028 |
| /* [RW 3] The source that is associated with arbitration element 3. Source |
| decoding is: 0- foc0; 1-fic1; 2-sleeping thread with priority 0; 3- |
| sleeping thread with priority 1; 4- sleeping thread with priority 2.Could |
| not be equal to register ~tsem_registers_arb_element0.arb_element0 and |
| ~tsem_registers_arb_element1.arb_element1 and |
| ~tsem_registers_arb_element2.arb_element2 */ |
| #define TSEM_REG_ARB_ELEMENT3 0x18002c |
| /* [RW 3] The source that is associated with arbitration element 4. Source |
| decoding is: 0- foc0; 1-fic1; 2-sleeping thread with priority 0; 3- |
| sleeping thread with priority 1; 4- sleeping thread with priority 2. |
| Could not be equal to register ~tsem_registers_arb_element0.arb_element0 |
| and ~tsem_registers_arb_element1.arb_element1 and |
| ~tsem_registers_arb_element2.arb_element2 and |
| ~tsem_registers_arb_element3.arb_element3 */ |
| #define TSEM_REG_ARB_ELEMENT4 0x180030 |
| #define TSEM_REG_ENABLE_IN 0x1800a4 |
| #define TSEM_REG_ENABLE_OUT 0x1800a8 |
| /* [RW 32] This address space contains all registers and memories that are |
| placed in SEM_FAST block. The SEM_FAST registers are described in |
| appendix B. In order to access the sem_fast registers the base address |
| ~fast_memory.fast_memory should be added to eachsem_fast register offset. */ |
| #define TSEM_REG_FAST_MEMORY 0x1a0000 |
| /* [RW 1] Disables input messages from FIC0 May be updated during run_time |
| by the microcode */ |
| #define TSEM_REG_FIC0_DISABLE 0x180224 |
| /* [RW 1] Disables input messages from FIC1 May be updated during run_time |
| by the microcode */ |
| #define TSEM_REG_FIC1_DISABLE 0x180234 |
| /* [RW 15] Interrupt table Read and write access to it is not possible in |
| the middle of the work */ |
| #define TSEM_REG_INT_TABLE 0x180400 |
| /* [ST 24] Statistics register. The number of messages that entered through |
| FIC0 */ |
| #define TSEM_REG_MSG_NUM_FIC0 0x180000 |
| /* [ST 24] Statistics register. The number of messages that entered through |
| FIC1 */ |
| #define TSEM_REG_MSG_NUM_FIC1 0x180004 |
| /* [ST 24] Statistics register. The number of messages that were sent to |
| FOC0 */ |
| #define TSEM_REG_MSG_NUM_FOC0 0x180008 |
| /* [ST 24] Statistics register. The number of messages that were sent to |
| FOC1 */ |
| #define TSEM_REG_MSG_NUM_FOC1 0x18000c |
| /* [ST 24] Statistics register. The number of messages that were sent to |
| FOC2 */ |
| #define TSEM_REG_MSG_NUM_FOC2 0x180010 |
| /* [ST 24] Statistics register. The number of messages that were sent to |
| FOC3 */ |
| #define TSEM_REG_MSG_NUM_FOC3 0x180014 |
| /* [RW 1] Disables input messages from the passive buffer May be updated |
| during run_time by the microcode */ |
| #define TSEM_REG_PAS_DISABLE 0x18024c |
| /* [WB 128] Debug only. Passive buffer memory */ |
| #define TSEM_REG_PASSIVE_BUFFER 0x181000 |
| /* [WB 46] pram memory. B45 is parity; b[44:0] - data. */ |
| #define TSEM_REG_PRAM 0x1c0000 |
| /* [R 8] Valid sleeping threads indication have bit per thread */ |
| #define TSEM_REG_SLEEP_THREADS_VALID 0x18026c |
| /* [R 1] EXT_STORE FIFO is empty in sem_slow_ls_ext */ |
| #define TSEM_REG_SLOW_EXT_STORE_EMPTY 0x1802a0 |
| /* [RW 8] List of free threads . There is a bit per thread. */ |
| #define TSEM_REG_THREADS_LIST 0x1802e4 |
| /* [RC 32] Parity register #0 read clear */ |
| #define TSEM_REG_TSEM_PRTY_STS_CLR_0 0x180118 |
| #define TSEM_REG_TSEM_PRTY_STS_CLR_1 0x180128 |
| /* [RW 3] The arbitration scheme of time_slot 0 */ |
| #define TSEM_REG_TS_0_AS 0x180038 |
| /* [RW 3] The arbitration scheme of time_slot 10 */ |
| #define TSEM_REG_TS_10_AS 0x180060 |
| /* [RW 3] The arbitration scheme of time_slot 11 */ |
| #define TSEM_REG_TS_11_AS 0x180064 |
| /* [RW 3] The arbitration scheme of time_slot 12 */ |
| #define TSEM_REG_TS_12_AS 0x180068 |
| /* [RW 3] The arbitration scheme of time_slot 13 */ |
| #define TSEM_REG_TS_13_AS 0x18006c |
| /* [RW 3] The arbitration scheme of time_slot 14 */ |
| #define TSEM_REG_TS_14_AS 0x180070 |
| /* [RW 3] The arbitration scheme of time_slot 15 */ |
| #define TSEM_REG_TS_15_AS 0x180074 |
| /* [RW 3] The arbitration scheme of time_slot 16 */ |
| #define TSEM_REG_TS_16_AS 0x180078 |
| /* [RW 3] The arbitration scheme of time_slot 17 */ |
| #define TSEM_REG_TS_17_AS 0x18007c |
| /* [RW 3] The arbitration scheme of time_slot 18 */ |
| #define TSEM_REG_TS_18_AS 0x180080 |
| /* [RW 3] The arbitration scheme of time_slot 1 */ |
| #define TSEM_REG_TS_1_AS 0x18003c |
| /* [RW 3] The arbitration scheme of time_slot 2 */ |
| #define TSEM_REG_TS_2_AS 0x180040 |
| /* [RW 3] The arbitration scheme of time_slot 3 */ |
| #define TSEM_REG_TS_3_AS 0x180044 |
| /* [RW 3] The arbitration scheme of time_slot 4 */ |
| #define TSEM_REG_TS_4_AS 0x180048 |
| /* [RW 3] The arbitration scheme of time_slot 5 */ |
| #define TSEM_REG_TS_5_AS 0x18004c |
| /* [RW 3] The arbitration scheme of time_slot 6 */ |
| #define TSEM_REG_TS_6_AS 0x180050 |
| /* [RW 3] The arbitration scheme of time_slot 7 */ |
| #define TSEM_REG_TS_7_AS 0x180054 |
| /* [RW 3] The arbitration scheme of time_slot 8 */ |
| #define TSEM_REG_TS_8_AS 0x180058 |
| /* [RW 3] The arbitration scheme of time_slot 9 */ |
| #define TSEM_REG_TS_9_AS 0x18005c |
| /* [RW 32] Interrupt mask register #0 read/write */ |
| #define TSEM_REG_TSEM_INT_MASK_0 0x180100 |
| #define TSEM_REG_TSEM_INT_MASK_1 0x180110 |
| /* [R 32] Interrupt register #0 read */ |
| #define TSEM_REG_TSEM_INT_STS_0 0x1800f4 |
| #define TSEM_REG_TSEM_INT_STS_1 0x180104 |
| /* [RW 32] Parity mask register #0 read/write */ |
| #define TSEM_REG_TSEM_PRTY_MASK_0 0x180120 |
| #define TSEM_REG_TSEM_PRTY_MASK_1 0x180130 |
| /* [R 32] Parity register #0 read */ |
| #define TSEM_REG_TSEM_PRTY_STS_0 0x180114 |
| #define TSEM_REG_TSEM_PRTY_STS_1 0x180124 |
| /* [W 7] VF or PF ID for reset error bit. Values 0-63 reset error bit for 64 |
| * VF; values 64-67 reset error for 4 PF; values 68-127 are not valid. */ |
| #define TSEM_REG_VFPF_ERR_NUM 0x180380 |
| /* [RW 32] Indirect access to AG context with 32-bits granularity. The bits |
| * [10:8] of the address should be the offset within the accessed LCID |
| * context; the bits [7:0] are the accessed LCID.Example: to write to REG10 |
| * LCID100. The RBC address should be 12'ha64. */ |
| #define UCM_REG_AG_CTX 0xe2000 |
| /* [R 5] Used to read the XX protection CAM occupancy counter. */ |
| #define UCM_REG_CAM_OCCUP 0xe0170 |
| /* [RW 1] CDU AG read Interface enable. If 0 - the request input is |
| disregarded; valid output is deasserted; all other signals are treated as |
| usual; if 1 - normal activity. */ |
| #define UCM_REG_CDU_AG_RD_IFEN 0xe0038 |
| /* [RW 1] CDU AG write Interface enable. If 0 - the request and valid input |
| are disregarded; all other signals are treated as usual; if 1 - normal |
| activity. */ |
| #define UCM_REG_CDU_AG_WR_IFEN 0xe0034 |
| /* [RW 1] CDU STORM read Interface enable. If 0 - the request input is |
| disregarded; valid output is deasserted; all other signals are treated as |
| usual; if 1 - normal activity. */ |
| #define UCM_REG_CDU_SM_RD_IFEN 0xe0040 |
| /* [RW 1] CDU STORM write Interface enable. If 0 - the request and valid |
| input is disregarded; all other signals are treated as usual; if 1 - |
| normal activity. */ |
| #define UCM_REG_CDU_SM_WR_IFEN 0xe003c |
| /* [RW 4] CFC output initial credit. Max credit available - 15.Write writes |
| the initial credit value; read returns the current value of the credit |
| counter. Must be initialized to 1 at start-up. */ |
| #define UCM_REG_CFC_INIT_CRD 0xe0204 |
| /* [RW 3] The weight of the CP input in the WRR mechanism. 0 stands for |
| weight 8 (the most prioritised); 1 stands for weight 1(least |
| prioritised); 2 stands for weight 2; tc. */ |
| #define UCM_REG_CP_WEIGHT 0xe00c4 |
| /* [RW 1] Input csem Interface enable. If 0 - the valid input is |
| disregarded; acknowledge output is deasserted; all other signals are |
| treated as usual; if 1 - normal activity. */ |
| #define UCM_REG_CSEM_IFEN 0xe0028 |
| /* [RC 1] Set when the message length mismatch (relative to last indication) |
| at the csem interface is detected. */ |
| #define UCM_REG_CSEM_LENGTH_MIS 0xe0160 |
| /* [RW 3] The weight of the input csem in the WRR mechanism. 0 stands for |
| weight 8 (the most prioritised); 1 stands for weight 1(least |
| prioritised); 2 stands for weight 2; tc. */ |
| #define UCM_REG_CSEM_WEIGHT 0xe00b8 |
| /* [RW 1] Input dorq Interface enable. If 0 - the valid input is |
| disregarded; acknowledge output is deasserted; all other signals are |
| treated as usual; if 1 - normal activity. */ |
| #define UCM_REG_DORQ_IFEN 0xe0030 |
| /* [RC 1] Set when the message length mismatch (relative to last indication) |
| at the dorq interface is detected. */ |
| #define UCM_REG_DORQ_LENGTH_MIS 0xe0168 |
| /* [RW 3] The weight of the input dorq in the WRR mechanism. 0 stands for |
| weight 8 (the most prioritised); 1 stands for weight 1(least |
| prioritised); 2 stands for weight 2; tc. */ |
| #define UCM_REG_DORQ_WEIGHT 0xe00c0 |
| /* [RW 8] The Event ID in case ErrorFlg input message bit is set. */ |
| #define UCM_REG_ERR_EVNT_ID 0xe00a4 |
| /* [RW 28] The CM erroneous header for QM and Timers formatting. */ |
| #define UCM_REG_ERR_UCM_HDR 0xe00a0 |
| /* [RW 8] The Event ID for Timers expiration. */ |
| #define UCM_REG_EXPR_EVNT_ID 0xe00a8 |
| /* [RW 8] FIC0 output initial credit. Max credit available - 255.Write |
| writes the initial credit value; read returns the current value of the |
| credit counter. Must be initialized to 64 at start-up. */ |
| #define UCM_REG_FIC0_INIT_CRD 0xe020c |
| /* [RW 8] FIC1 output initial credit. Max credit available - 255.Write |
| writes the initial credit value; read returns the current value of the |
| credit counter. Must be initialized to 64 at start-up. */ |
| #define UCM_REG_FIC1_INIT_CRD 0xe0210 |
| /* [RW 1] Arbitration between Input Arbiter groups: 0 - fair Round-Robin; 1 |
| - strict priority defined by ~ucm_registers_gr_ag_pr.gr_ag_pr; |
| ~ucm_registers_gr_ld0_pr.gr_ld0_pr and |
| ~ucm_registers_gr_ld1_pr.gr_ld1_pr. */ |
| #define UCM_REG_GR_ARB_TYPE 0xe0144 |
| /* [RW 2] Load (FIC0) channel group priority. The lowest priority is 0; the |
| highest priority is 3. It is supposed that the Store channel group is |
| compliment to the others. */ |
| #define UCM_REG_GR_LD0_PR 0xe014c |
| /* [RW 2] Load (FIC1) channel group priority. The lowest priority is 0; the |
| highest priority is 3. It is supposed that the Store channel group is |
| compliment to the others. */ |
| #define UCM_REG_GR_LD1_PR 0xe0150 |
| /* [RW 2] The queue index for invalidate counter flag decision. */ |
| #define UCM_REG_INV_CFLG_Q 0xe00e4 |
| /* [RW 5] The number of double REG-pairs; loaded from the STORM context and |
| sent to STORM; for a specific connection type. the double REG-pairs are |
| used in order to align to STORM context row size of 128 bits. The offset |
| of these data in the STORM context is always 0. Index _i stands for the |
| connection type (one of 16). */ |
| #define UCM_REG_N_SM_CTX_LD_0 0xe0054 |
| #define UCM_REG_N_SM_CTX_LD_1 0xe0058 |
| #define UCM_REG_N_SM_CTX_LD_2 0xe005c |
| #define UCM_REG_N_SM_CTX_LD_3 0xe0060 |
| #define UCM_REG_N_SM_CTX_LD_4 0xe0064 |
| #define UCM_REG_N_SM_CTX_LD_5 0xe0068 |
| #define UCM_REG_PHYS_QNUM0_0 0xe0110 |
| #define UCM_REG_PHYS_QNUM0_1 0xe0114 |
| #define UCM_REG_PHYS_QNUM1_0 0xe0118 |
| #define UCM_REG_PHYS_QNUM1_1 0xe011c |
| #define UCM_REG_PHYS_QNUM2_0 0xe0120 |
| #define UCM_REG_PHYS_QNUM2_1 0xe0124 |
| #define UCM_REG_PHYS_QNUM3_0 0xe0128 |
| #define UCM_REG_PHYS_QNUM3_1 0xe012c |
| /* [RW 8] The Event ID for Timers formatting in case of stop done. */ |
| #define UCM_REG_STOP_EVNT_ID 0xe00ac |
| /* [RC 1] Set when the message length mismatch (relative to last indication) |
| at the STORM interface is detected. */ |
| #define UCM_REG_STORM_LENGTH_MIS 0xe0154 |
| /* [RW 1] STORM - CM Interface enable. If 0 - the valid input is |
| disregarded; acknowledge output is deasserted; all other signals are |
| treated as usual; if 1 - normal activity. */ |
| #define UCM_REG_STORM_UCM_IFEN 0xe0010 |
| /* [RW 3] The weight of the STORM input in the WRR mechanism. 0 stands for |
| weight 8 (the most prioritised); 1 stands for weight 1(least |
| prioritised); 2 stands for weight 2; tc. */ |
| #define UCM_REG_STORM_WEIGHT 0xe00b0 |
| /* [RW 4] Timers output initial credit. Max credit available - 15.Write |
| writes the initial credit value; read returns the current value of the |
| credit counter. Must be initialized to 4 at start-up. */ |
| #define UCM_REG_TM_INIT_CRD 0xe021c |
| /* [RW 28] The CM header for Timers expiration command. */ |
| #define UCM_REG_TM_UCM_HDR 0xe009c |
| /* [RW 1] Timers - CM Interface enable. If 0 - the valid input is |
| disregarded; acknowledge output is deasserted; all other signals are |
| treated as usual; if 1 - normal activity. */ |
| #define UCM_REG_TM_UCM_IFEN 0xe001c |
| /* [RW 3] The weight of the Timers input in the WRR mechanism. 0 stands for |
| weight 8 (the most prioritised); 1 stands for weight 1(least |
| prioritised); 2 stands for weight 2; tc. */ |
| #define UCM_REG_TM_WEIGHT 0xe00d4 |
| /* [RW 1] Input tsem Interface enable. If 0 - the valid input is |
| disregarded; acknowledge output is deasserted; all other signals are |
| treated as usual; if 1 - normal activity. */ |
| #define UCM_REG_TSEM_IFEN 0xe0024 |
| /* [RC 1] Set when the message length mismatch (relative to last indication) |
| at the tsem interface is detected. */ |
| #define UCM_REG_TSEM_LENGTH_MIS 0xe015c |
| /* [RW 3] The weight of the input tsem in the WRR mechanism. 0 stands for |
| weight 8 (the most prioritised); 1 stands for weight 1(least |
| prioritised); 2 stands for weight 2; tc. */ |
| #define UCM_REG_TSEM_WEIGHT 0xe00b4 |
| /* [RW 1] CM - CFC Interface enable. If 0 - the valid input is disregarded; |
| acknowledge output is deasserted; all other signals are treated as usual; |
| if 1 - normal activity. */ |
| #define UCM_REG_UCM_CFC_IFEN 0xe0044 |
| /* [RW 11] Interrupt mask register #0 read/write */ |
| #define UCM_REG_UCM_INT_MASK 0xe01d4 |
| /* [R 11] Interrupt register #0 read */ |
| #define UCM_REG_UCM_INT_STS 0xe01c8 |
| /* [RW 27] Parity mask register #0 read/write */ |
| #define UCM_REG_UCM_PRTY_MASK 0xe01e4 |
| /* [R 27] Parity register #0 read */ |
| #define UCM_REG_UCM_PRTY_STS 0xe01d8 |
| /* [RC 27] Parity register #0 read clear */ |
| #define UCM_REG_UCM_PRTY_STS_CLR 0xe01dc |
| /* [RW 2] The size of AG context region 0 in REG-pairs. Designates the MS |
| REG-pair number (e.g. if region 0 is 6 REG-pairs; the value should be 5). |
| Is used to determine the number of the AG context REG-pairs written back; |
| when the Reg1WbFlg isn't set. */ |
| #define UCM_REG_UCM_REG0_SZ 0xe00dc |
| /* [RW 1] CM - STORM 0 Interface enable. If 0 - the acknowledge input is |
| disregarded; valid is deasserted; all other signals are treated as usual; |
| if 1 - normal activity. */ |
| #define UCM_REG_UCM_STORM0_IFEN 0xe0004 |
| /* [RW 1] CM - STORM 1 Interface enable. If 0 - the acknowledge input is |
| disregarded; valid is deasserted; all other signals are treated as usual; |
| if 1 - normal activity. */ |
| #define UCM_REG_UCM_STORM1_IFEN 0xe0008 |
| /* [RW 1] CM - Timers Interface enable. If 0 - the valid input is |
| disregarded; acknowledge output is deasserted; all other signals are |
| treated as usual; if 1 - normal activity. */ |
| #define UCM_REG_UCM_TM_IFEN 0xe0020 |
| /* [RW 1] CM - QM Interface enable. If 0 - the acknowledge input is |
| disregarded; valid is deasserted; all other signals are treated as usual; |
| if 1 - normal activity. */ |
| #define UCM_REG_UCM_UQM_IFEN 0xe000c |
| /* [RW 1] If set the Q index; received from the QM is inserted to event ID. */ |
| #define UCM_REG_UCM_UQM_USE_Q 0xe00d8 |
| /* [RW 6] QM output initial credit. Max credit available - 32.Write writes |
| the initial credit value; read returns the current value of the credit |
| counter. Must be initialized to 32 at start-up. */ |
| #define UCM_REG_UQM_INIT_CRD 0xe0220 |
| /* [RW 3] The weight of the QM (primary) input in the WRR mechanism. 0 |
| stands for weight 8 (the most prioritised); 1 stands for weight 1(least |
| prioritised); 2 stands for weight 2; tc. */ |
| #define UCM_REG_UQM_P_WEIGHT 0xe00cc |
| /* [RW 3] The weight of the QM (secondary) input in the WRR mechanism. 0 |
| stands for weight 8 (the most prioritised); 1 stands for weight 1(least |
| prioritised); 2 stands for weight 2; tc. */ |
| #define UCM_REG_UQM_S_WEIGHT 0xe00d0 |
| /* [RW 28] The CM header value for QM request (primary). */ |
| #define UCM_REG_UQM_UCM_HDR_P 0xe0094 |
| /* [RW 28] The CM header value for QM request (secondary). */ |
| #define UCM_REG_UQM_UCM_HDR_S 0xe0098 |
| /* [RW 1] QM - CM Interface enable. If 0 - the valid input is disregarded; |
| acknowledge output is deasserted; all other signals are treated as usual; |
| if 1 - normal activity. */ |
| #define UCM_REG_UQM_UCM_IFEN 0xe0014 |
| /* [RW 1] Input SDM Interface enable. If 0 - the valid input is disregarded; |
| acknowledge output is deasserted; all other signals are treated as usual; |
| if 1 - normal activity. */ |
| #define UCM_REG_USDM_IFEN 0xe0018 |
| /* [RC 1] Set when the message length mismatch (relative to last indication) |
| at the SDM interface is detected. */ |
| #define UCM_REG_USDM_LENGTH_MIS 0xe0158 |
| /* [RW 3] The weight of the SDM input in the WRR mechanism. 0 stands for |
| weight 8 (the most prioritised); 1 stands for weight 1(least |
| prioritised); 2 stands for weight 2; tc. */ |
| #define UCM_REG_USDM_WEIGHT 0xe00c8 |
| /* [RW 1] Input xsem Interface enable. If 0 - the valid input is |
| disregarded; acknowledge output is deasserted; all other signals are |
| treated as usual; if 1 - normal activity. */ |
| #define UCM_REG_XSEM_IFEN 0xe002c |
| /* [RC 1] Set when the message length mismatch (relative to last indication) |
| at the xsem interface isdetected. */ |
| #define UCM_REG_XSEM_LENGTH_MIS 0xe0164 |
| /* [RW 3] The weight of the input xsem in the WRR mechanism. 0 stands for |
| weight 8 (the most prioritised); 1 stands for weight 1(least |
| prioritised); 2 stands for weight 2; tc. */ |
| #define UCM_REG_XSEM_WEIGHT 0xe00bc |
| /* [RW 20] Indirect access to the descriptor table of the XX protection |
| mechanism. The fields are:[5:0] - message length; 14:6] - message |
| pointer; 19:15] - next pointer. */ |
| #define UCM_REG_XX_DESCR_TABLE 0xe0280 |
| #define UCM_REG_XX_DESCR_TABLE_SIZE 27 |
| /* [R 6] Use to read the XX protection Free counter. */ |
| #define UCM_REG_XX_FREE 0xe016c |
| /* [RW 6] Initial value for the credit counter; responsible for fulfilling |
| of the Input Stage XX protection buffer by the XX protection pending |
| messages. Write writes the initial credit value; read returns the current |
| value of the credit counter. Must be initialized to 12 at start-up. */ |
| #define UCM_REG_XX_INIT_CRD 0xe0224 |
| /* [RW 6] The maximum number of pending messages; which may be stored in XX |
| protection. ~ucm_registers_xx_free.xx_free read on read. */ |
| #define UCM_REG_XX_MSG_NUM 0xe0228 |
| /* [RW 8] The Event ID; sent to the STORM in case of XX overflow. */ |
| #define UCM_REG_XX_OVFL_EVNT_ID 0xe004c |
| /* [RW 16] Indirect access to the XX table of the XX protection mechanism. |
| The fields are: [4:0] - tail pointer; 10:5] - Link List size; 15:11] - |
| header pointer. */ |
| #define UCM_REG_XX_TABLE 0xe0300 |
| #define UMAC_COMMAND_CONFIG_REG_HD_ENA (0x1<<10) |
| #define UMAC_COMMAND_CONFIG_REG_IGNORE_TX_PAUSE (0x1<<28) |
| #define UMAC_COMMAND_CONFIG_REG_LOOP_ENA (0x1<<15) |
| #define UMAC_COMMAND_CONFIG_REG_NO_LGTH_CHECK (0x1<<24) |
| #define UMAC_COMMAND_CONFIG_REG_PAD_EN (0x1<<5) |
| #define UMAC_COMMAND_CONFIG_REG_PAUSE_IGNORE (0x1<<8) |
| #define UMAC_COMMAND_CONFIG_REG_PROMIS_EN (0x1<<4) |
| #define UMAC_COMMAND_CONFIG_REG_RX_ENA (0x1<<1) |
| #define UMAC_COMMAND_CONFIG_REG_SW_RESET (0x1<<13) |
| #define UMAC_COMMAND_CONFIG_REG_TX_ENA (0x1<<0) |
| #define UMAC_REG_COMMAND_CONFIG 0x8 |
| /* [RW 16] This is the duration for which MAC must wait to go back to ACTIVE |
| * state from LPI state when it receives packet for transmission. The |
| * decrement unit is 1 micro-second. */ |
| #define UMAC_REG_EEE_WAKE_TIMER 0x6c |
| /* [RW 32] Register Bit 0 refers to Bit 16 of the MAC address; Bit 1 refers |
| * to bit 17 of the MAC address etc. */ |
| #define UMAC_REG_MAC_ADDR0 0xc |
| /* [RW 16] Register Bit 0 refers to Bit 0 of the MAC address; Register Bit 1 |
| * refers to Bit 1 of the MAC address etc. Bits 16 to 31 are reserved. */ |
| #define UMAC_REG_MAC_ADDR1 0x10 |
| /* [RW 14] Defines a 14-Bit maximum frame length used by the MAC receive |
| * logic to check frames. */ |
| #define UMAC_REG_MAXFR 0x14 |
| #define UMAC_REG_UMAC_EEE_CTRL 0x64 |
| #define UMAC_UMAC_EEE_CTRL_REG_EEE_EN (0x1<<3) |
| /* [RW 8] The event id for aggregated interrupt 0 */ |
| #define USDM_REG_AGG_INT_EVENT_0 0xc4038 |
| #define USDM_REG_AGG_INT_EVENT_1 0xc403c |
| #define USDM_REG_AGG_INT_EVENT_2 0xc4040 |
| #define USDM_REG_AGG_INT_EVENT_4 0xc4048 |
| #define USDM_REG_AGG_INT_EVENT_5 0xc404c |
| #define USDM_REG_AGG_INT_EVENT_6 0xc4050 |
| /* [RW 1] For each aggregated interrupt index whether the mode is normal (0) |
| or auto-mask-mode (1) */ |
| #define USDM_REG_AGG_INT_MODE_0 0xc41b8 |
| #define USDM_REG_AGG_INT_MODE_1 0xc41bc |
| #define USDM_REG_AGG_INT_MODE_4 0xc41c8 |
| #define USDM_REG_AGG_INT_MODE_5 0xc41cc |
| #define USDM_REG_AGG_INT_MODE_6 0xc41d0 |
| /* [RW 1] The T bit for aggregated interrupt 5 */ |
| #define USDM_REG_AGG_INT_T_5 0xc40cc |
| #define USDM_REG_AGG_INT_T_6 0xc40d0 |
| /* [RW 13] The start address in the internal RAM for the cfc_rsp lcid */ |
| #define USDM_REG_CFC_RSP_START_ADDR 0xc4008 |
| /* [RW 16] The maximum value of the completion counter #0 */ |
| #define USDM_REG_CMP_COUNTER_MAX0 0xc401c |
| /* [RW 16] The maximum value of the completion counter #1 */ |
| #define USDM_REG_CMP_COUNTER_MAX1 0xc4020 |
| /* [RW 16] The maximum value of the completion counter #2 */ |
| #define USDM_REG_CMP_COUNTER_MAX2 0xc4024 |
| /* [RW 16] The maximum value of the completion counter #3 */ |
| #define USDM_REG_CMP_COUNTER_MAX3 0xc4028 |
| /* [RW 13] The start address in the internal RAM for the completion |
| counters. */ |
| #define USDM_REG_CMP_COUNTER_START_ADDR 0xc400c |
| #define USDM_REG_ENABLE_IN1 0xc4238 |
| #define USDM_REG_ENABLE_IN2 0xc423c |
| #define USDM_REG_ENABLE_OUT1 0xc4240 |
| #define USDM_REG_ENABLE_OUT2 0xc4244 |
| /* [RW 4] The initial number of messages that can be sent to the pxp control |
| interface without receiving any ACK. */ |
| #define USDM_REG_INIT_CREDIT_PXP_CTRL 0xc44c0 |
| /* [ST 32] The number of ACK after placement messages received */ |
| #define USDM_REG_NUM_OF_ACK_AFTER_PLACE 0xc4280 |
| /* [ST 32] The number of packet end messages received from the parser */ |
| #define USDM_REG_NUM_OF_PKT_END_MSG 0xc4278 |
| /* [ST 32] The number of requests received from the pxp async if */ |
| #define USDM_REG_NUM_OF_PXP_ASYNC_REQ 0xc427c |
| /* [ST 32] The number of commands received in queue 0 */ |
| #define USDM_REG_NUM_OF_Q0_CMD 0xc4248 |
| /* [ST 32] The number of commands received in queue 10 */ |
| #define USDM_REG_NUM_OF_Q10_CMD 0xc4270 |
| /* [ST 32] The number of commands received in queue 11 */ |
| #define USDM_REG_NUM_OF_Q11_CMD 0xc4274 |
| /* [ST 32] The number of commands received in queue 1 */ |
| #define USDM_REG_NUM_OF_Q1_CMD 0xc424c |
| /* [ST 32] The number of commands received in queue 2 */ |
| #define USDM_REG_NUM_OF_Q2_CMD 0xc4250 |
| /* [ST 32] The number of commands received in queue 3 */ |
| #define USDM_REG_NUM_OF_Q3_CMD 0xc4254 |
| /* [ST 32] The number of commands received in queue 4 */ |
| #define USDM_REG_NUM_OF_Q4_CMD 0xc4258 |
| /* [ST 32] The number of commands received in queue 5 */ |
| #define USDM_REG_NUM_OF_Q5_CMD 0xc425c |
| /* [ST 32] The number of commands received in queue 6 */ |
| #define USDM_REG_NUM_OF_Q6_CMD 0xc4260 |
| /* [ST 32] The number of commands received in queue 7 */ |
| #define USDM_REG_NUM_OF_Q7_CMD 0xc4264 |
| /* [ST 32] The number of commands received in queue 8 */ |
| #define USDM_REG_NUM_OF_Q8_CMD 0xc4268 |
| /* [ST 32] The number of commands received in queue 9 */ |
| #define USDM_REG_NUM_OF_Q9_CMD 0xc426c |
| /* [RW 13] The start address in the internal RAM for the packet end message */ |
| #define USDM_REG_PCK_END_MSG_START_ADDR 0xc4014 |
| /* [RW 13] The start address in the internal RAM for queue counters */ |
| #define USDM_REG_Q_COUNTER_START_ADDR 0xc4010 |
| /* [R 1] pxp_ctrl rd_data fifo empty in sdm_dma_rsp block */ |
| #define USDM_REG_RSP_PXP_CTRL_RDATA_EMPTY 0xc4550 |
| /* [R 1] parser fifo empty in sdm_sync block */ |
| #define USDM_REG_SYNC_PARSER_EMPTY 0xc4558 |
| /* [R 1] parser serial fifo empty in sdm_sync block */ |
| #define USDM_REG_SYNC_SYNC_EMPTY 0xc4560 |
| /* [RW 32] Tick for timer counter. Applicable only when |
| ~usdm_registers_timer_tick_enable.timer_tick_enable =1 */ |
| #define USDM_REG_TIMER_TICK 0xc4000 |
| /* [RW 32] Interrupt mask register #0 read/write */ |
| #define USDM_REG_USDM_INT_MASK_0 0xc42a0 |
| #define USDM_REG_USDM_INT_MASK_1 0xc42b0 |
| /* [R 32] Interrupt register #0 read */ |
| #define USDM_REG_USDM_INT_STS_0 0xc4294 |
| #define USDM_REG_USDM_INT_STS_1 0xc42a4 |
| /* [RW 11] Parity mask register #0 read/write */ |
| #define USDM_REG_USDM_PRTY_MASK 0xc42c0 |
| /* [R 11] Parity register #0 read */ |
| #define USDM_REG_USDM_PRTY_STS 0xc42b4 |
| /* [RC 11] Parity register #0 read clear */ |
| #define USDM_REG_USDM_PRTY_STS_CLR 0xc42b8 |
| /* [RW 5] The number of time_slots in the arbitration cycle */ |
| #define USEM_REG_ARB_CYCLE_SIZE 0x300034 |
| /* [RW 3] The source that is associated with arbitration element 0. Source |
| decoding is: 0- foc0; 1-fic1; 2-sleeping thread with priority 0; 3- |
| sleeping thread with priority 1; 4- sleeping thread with priority 2 */ |
| #define USEM_REG_ARB_ELEMENT0 0x300020 |
| /* [RW 3] The source that is associated with arbitration element 1. Source |
| decoding is: 0- foc0; 1-fic1; 2-sleeping thread with priority 0; 3- |
| sleeping thread with priority 1; 4- sleeping thread with priority 2. |
| Could not be equal to register ~usem_registers_arb_element0.arb_element0 */ |
| #define USEM_REG_ARB_ELEMENT1 0x300024 |
| /* [RW 3] The source that is associated with arbitration element 2. Source |
| decoding is: 0- foc0; 1-fic1; 2-sleeping thread with priority 0; 3- |
| sleeping thread with priority 1; 4- sleeping thread with priority 2. |
| Could not be equal to register ~usem_registers_arb_element0.arb_element0 |
| and ~usem_registers_arb_element1.arb_element1 */ |
| #define USEM_REG_ARB_ELEMENT2 0x300028 |
| /* [RW 3] The source that is associated with arbitration element 3. Source |
| decoding is: 0- foc0; 1-fic1; 2-sleeping thread with priority 0; 3- |
| sleeping thread with priority 1; 4- sleeping thread with priority 2.Could |
| not be equal to register ~usem_registers_arb_element0.arb_element0 and |
| ~usem_registers_arb_element1.arb_element1 and |
| ~usem_registers_arb_element2.arb_element2 */ |
| #define USEM_REG_ARB_ELEMENT3 0x30002c |
| /* [RW 3] The source that is associated with arbitration element 4. Source |
| decoding is: 0- foc0; 1-fic1; 2-sleeping thread with priority 0; 3- |
| sleeping thread with priority 1; 4- sleeping thread with priority 2. |
| Could not be equal to register ~usem_registers_arb_element0.arb_element0 |
| and ~usem_registers_arb_element1.arb_element1 and |
| ~usem_registers_arb_element2.arb_element2 and |
| ~usem_registers_arb_element3.arb_element3 */ |
| #define USEM_REG_ARB_ELEMENT4 0x300030 |
| #define USEM_REG_ENABLE_IN 0x3000a4 |
| #define USEM_REG_ENABLE_OUT 0x3000a8 |
| /* [RW 32] This address space contains all registers and memories that are |
| placed in SEM_FAST block. The SEM_FAST registers are described in |
| appendix B. In order to access the sem_fast registers the base address |
| ~fast_memory.fast_memory should be added to eachsem_fast register offset. */ |
| #define USEM_REG_FAST_MEMORY 0x320000 |
| /* [RW 1] Disables input messages from FIC0 May be updated during run_time |
| by the microcode */ |
| #define USEM_REG_FIC0_DISABLE 0x300224 |
| /* [RW 1] Disables input messages from FIC1 May be updated during run_time |
| by the microcode */ |
| #define USEM_REG_FIC1_DISABLE 0x300234 |
| /* [RW 15] Interrupt table Read and write access to it is not possible in |
| the middle of the work */ |
| #define USEM_REG_INT_TABLE 0x300400 |
| /* [ST 24] Statistics register. The number of messages that entered through |
| FIC0 */ |
| #define USEM_REG_MSG_NUM_FIC0 0x300000 |
| /* [ST 24] Statistics register. The number of messages that entered through |
| FIC1 */ |
| #define USEM_REG_MSG_NUM_FIC1 0x300004 |
| /* [ST 24] Statistics register. The number of messages that were sent to |
| FOC0 */ |
| #define USEM_REG_MSG_NUM_FOC0 0x300008 |
| /* [ST 24] Statistics register. The number of messages that were sent to |
| FOC1 */ |
| #define USEM_REG_MSG_NUM_FOC1 0x30000c |
| /* [ST 24] Statistics register. The number of messages that were sent to |
| FOC2 */ |
| #define USEM_REG_MSG_NUM_FOC2 0x300010 |
| /* [ST 24] Statistics register. The number of messages that were sent to |
| FOC3 */ |
| #define USEM_REG_MSG_NUM_FOC3 0x300014 |
| /* [RW 1] Disables input messages from the passive buffer May be updated |
| during run_time by the microcode */ |
| #define USEM_REG_PAS_DISABLE 0x30024c |
| /* [WB 128] Debug only. Passive buffer memory */ |
| #define USEM_REG_PASSIVE_BUFFER 0x302000 |
| /* [WB 46] pram memory. B45 is parity; b[44:0] - data. */ |
| #define USEM_REG_PRAM 0x340000 |
| /* [R 16] Valid sleeping threads indication have bit per thread */ |
| #define USEM_REG_SLEEP_THREADS_VALID 0x30026c |
| /* [R 1] EXT_STORE FIFO is empty in sem_slow_ls_ext */ |
| #define USEM_REG_SLOW_EXT_STORE_EMPTY 0x3002a0 |
| /* [RW 16] List of free threads . There is a bit per thread. */ |
| #define USEM_REG_THREADS_LIST 0x3002e4 |
| /* [RW 3] The arbitration scheme of time_slot 0 */ |
| #define USEM_REG_TS_0_AS 0x300038 |
| /* [RW 3] The arbitration scheme of time_slot 10 */ |
| #define USEM_REG_TS_10_AS 0x300060 |
| /* [RW 3] The arbitration scheme of time_slot 11 */ |
| #define USEM_REG_TS_11_AS 0x300064 |
| /* [RW 3] The arbitration scheme of time_slot 12 */ |
| #define USEM_REG_TS_12_AS 0x300068 |
| /* [RW 3] The arbitration scheme of time_slot 13 */ |
| #define USEM_REG_TS_13_AS 0x30006c |
| /* [RW 3] The arbitration scheme of time_slot 14 */ |
| #define USEM_REG_TS_14_AS 0x300070 |
| /* [RW 3] The arbitration scheme of time_slot 15 */ |
| #define USEM_REG_TS_15_AS 0x300074 |
| /* [RW 3] The arbitration scheme of time_slot 16 */ |
| #define USEM_REG_TS_16_AS 0x300078 |
| /* [RW 3] The arbitration scheme of time_slot 17 */ |
| #define USEM_REG_TS_17_AS 0x30007c |
| /* [RW 3] The arbitration scheme of time_slot 18 */ |
| #define USEM_REG_TS_18_AS 0x300080 |
| /* [RW 3] The arbitration scheme of time_slot 1 */ |
| #define USEM_REG_TS_1_AS 0x30003c |
| /* [RW 3] The arbitration scheme of time_slot 2 */ |
| #define USEM_REG_TS_2_AS 0x300040 |
| /* [RW 3] The arbitration scheme of time_slot 3 */ |
| #define USEM_REG_TS_3_AS 0x300044 |
| /* [RW 3] The arbitration scheme of time_slot 4 */ |
| #define USEM_REG_TS_4_AS 0x300048 |
| /* [RW 3] The arbitration scheme of time_slot 5 */ |
| #define USEM_REG_TS_5_AS 0x30004c |
| /* [RW 3] The arbitration scheme of time_slot 6 */ |
| #define USEM_REG_TS_6_AS 0x300050 |
| /* [RW 3] The arbitration scheme of time_slot 7 */ |
| #define USEM_REG_TS_7_AS 0x300054 |
| /* [RW 3] The arbitration scheme of time_slot 8 */ |
| #define USEM_REG_TS_8_AS 0x300058 |
| /* [RW 3] The arbitration scheme of time_slot 9 */ |
| #define USEM_REG_TS_9_AS 0x30005c |
| /* [RW 32] Interrupt mask register #0 read/write */ |
| #define USEM_REG_USEM_INT_MASK_0 0x300110 |
| #define USEM_REG_USEM_INT_MASK_1 0x300120 |
| /* [R 32] Interrupt register #0 read */ |
| #define USEM_REG_USEM_INT_STS_0 0x300104 |
| #define USEM_REG_USEM_INT_STS_1 0x300114 |
| /* [RW 32] Parity mask register #0 read/write */ |
| #define USEM_REG_USEM_PRTY_MASK_0 0x300130 |
| #define USEM_REG_USEM_PRTY_MASK_1 0x300140 |
| /* [R 32] Parity register #0 read */ |
| #define USEM_REG_USEM_PRTY_STS_0 0x300124 |
| #define USEM_REG_USEM_PRTY_STS_1 0x300134 |
| /* [RC 32] Parity register #0 read clear */ |
| #define USEM_REG_USEM_PRTY_STS_CLR_0 0x300128 |
| #define USEM_REG_USEM_PRTY_STS_CLR_1 0x300138 |
| /* [W 7] VF or PF ID for reset error bit. Values 0-63 reset error bit for 64 |
| * VF; values 64-67 reset error for 4 PF; values 68-127 are not valid. */ |
| #define USEM_REG_VFPF_ERR_NUM 0x300380 |
| #define VFC_MEMORIES_RST_REG_CAM_RST (0x1<<0) |
| #define VFC_MEMORIES_RST_REG_RAM_RST (0x1<<1) |
| #define VFC_REG_MEMORIES_RST 0x1943c |
| /* [RW 32] Indirect access to AG context with 32-bits granularity. The bits |
| * [12:8] of the address should be the offset within the accessed LCID |
| * context; the bits [7:0] are the accessed LCID.Example: to write to REG10 |
| * LCID100. The RBC address should be 13'ha64. */ |
| #define XCM_REG_AG_CTX 0x28000 |
| /* [RW 2] The queue index for registration on Aux1 counter flag. */ |
| #define XCM_REG_AUX1_Q 0x20134 |
| /* [RW 2] Per each decision rule the queue index to register to. */ |
| #define XCM_REG_AUX_CNT_FLG_Q_19 0x201b0 |
| /* [R 5] Used to read the XX protection CAM occupancy counter. */ |
| #define XCM_REG_CAM_OCCUP 0x20244 |
| /* [RW 1] CDU AG read Interface enable. If 0 - the request input is |
| disregarded; valid output is deasserted; all other signals are treated as |
| usual; if 1 - normal activity. */ |
| #define XCM_REG_CDU_AG_RD_IFEN 0x20044 |
| /* [RW 1] CDU AG write Interface enable. If 0 - the request and valid input |
| are disregarded; all other signals are treated as usual; if 1 - normal |
| activity. */ |
| #define XCM_REG_CDU_AG_WR_IFEN 0x20040 |
| /* [RW 1] CDU STORM read Interface enable. If 0 - the request input is |
| disregarded; valid output is deasserted; all other signals are treated as |
| usual; if 1 - normal activity. */ |
| #define XCM_REG_CDU_SM_RD_IFEN 0x2004c |
| /* [RW 1] CDU STORM write Interface enable. If 0 - the request and valid |
| input is disregarded; all other signals are treated as usual; if 1 - |
| normal activity. */ |
| #define XCM_REG_CDU_SM_WR_IFEN 0x20048 |
| /* [RW 4] CFC output initial credit. Max credit available - 15.Write writes |
| the initial credit value; read returns the current value of the credit |
| counter. Must be initialized to 1 at start-up. */ |
| #define XCM_REG_CFC_INIT_CRD 0x20404 |
| /* [RW 3] The weight of the CP input in the WRR mechanism. 0 stands for |
| weight 8 (the most prioritised); 1 stands for weight 1(least |
| prioritised); 2 stands for weight 2; tc. */ |
| #define XCM_REG_CP_WEIGHT 0x200dc |
| /* [RW 1] Input csem Interface enable. If 0 - the valid input is |
| disregarded; acknowledge output is deasserted; all other signals are |
| treated as usual; if 1 - normal activity. */ |
| #define XCM_REG_CSEM_IFEN 0x20028 |
| /* [RC 1] Set at message length mismatch (relative to last indication) at |
| the csem interface. */ |
| #define XCM_REG_CSEM_LENGTH_MIS 0x20228 |
| /* [RW 3] The weight of the input csem in the WRR mechanism. 0 stands for |
| weight 8 (the most prioritised); 1 stands for weight 1(least |
| prioritised); 2 stands for weight 2; tc. */ |
| #define XCM_REG_CSEM_WEIGHT 0x200c4 |
| /* [RW 1] Input dorq Interface enable. If 0 - the valid input is |
| disregarded; acknowledge output is deasserted; all other signals are |
| treated as usual; if 1 - normal activity. */ |
| #define XCM_REG_DORQ_IFEN 0x20030 |
| /* [RC 1] Set at message length mismatch (relative to last indication) at |
| the dorq interface. */ |
| #define XCM_REG_DORQ_LENGTH_MIS 0x20230 |
| /* [RW 3] The weight of the input dorq in the WRR mechanism. 0 stands for |
| weight 8 (the most prioritised); 1 stands for weight 1(least |
| prioritised); 2 stands for weight 2; tc. */ |
| #define XCM_REG_DORQ_WEIGHT 0x200cc |
| /* [RW 8] The Event ID in case the ErrorFlg input message bit is set. */ |
| #define XCM_REG_ERR_EVNT_ID 0x200b0 |
| /* [RW 28] The CM erroneous header for QM and Timers formatting. */ |
| #define XCM_REG_ERR_XCM_HDR 0x200ac |
| /* [RW 8] The Event ID for Timers expiration. */ |
| #define XCM_REG_EXPR_EVNT_ID 0x200b4 |
| /* [RW 8] FIC0 output initial credit. Max credit available - 255.Write |
| writes the initial credit value; read returns the current value of the |
| credit counter. Must be initialized to 64 at start-up. */ |
| #define XCM_REG_FIC0_INIT_CRD 0x2040c |
| /* [RW 8] FIC1 output initial credit. Max credit available - 255.Write |
| writes the initial credit value; read returns the current value of the |
| credit counter. Must be initialized to 64 at start-up. */ |
| #define XCM_REG_FIC1_INIT_CRD 0x20410 |
| #define XCM_REG_GLB_DEL_ACK_MAX_CNT_0 0x20118 |
| #define XCM_REG_GLB_DEL_ACK_MAX_CNT_1 0x2011c |
| #define XCM_REG_GLB_DEL_ACK_TMR_VAL_0 0x20108 |
| #define XCM_REG_GLB_DEL_ACK_TMR_VAL_1 0x2010c |
| /* [RW 1] Arbitratiojn between Input Arbiter groups: 0 - fair Round-Robin; 1 |
| - strict priority defined by ~xcm_registers_gr_ag_pr.gr_ag_pr; |
| ~xcm_registers_gr_ld0_pr.gr_ld0_pr and |
| ~xcm_registers_gr_ld1_pr.gr_ld1_pr. */ |
| #define XCM_REG_GR_ARB_TYPE 0x2020c |
| /* [RW 2] Load (FIC0) channel group priority. The lowest priority is 0; the |
| highest priority is 3. It is supposed that the Channel group is the |
| compliment of the other 3 groups. */ |
| #define XCM_REG_GR_LD0_PR 0x20214 |
| /* [RW 2] Load (FIC1) channel group priority. The lowest priority is 0; the |
| highest priority is 3. It is supposed that the Channel group is the |
| compliment of the other 3 groups. */ |
| #define XCM_REG_GR_LD1_PR 0x20218 |
| /* [RW 1] Input nig0 Interface enable. If 0 - the valid input is |
| disregarded; acknowledge output is deasserted; all other signals are |
| treated as usual; if 1 - normal activity. */ |
| #define XCM_REG_NIG0_IFEN 0x20038 |
| /* [RC 1] Set at message length mismatch (relative to last indication) at |
| the nig0 interface. */ |
| #define XCM_REG_NIG0_LENGTH_MIS 0x20238 |
| /* [RW 3] The weight of the input nig0 in the WRR mechanism. 0 stands for |
| weight 8 (the most prioritised); 1 stands for weight 1(least |
| prioritised); 2 stands for weight 2; tc. */ |
| #define XCM_REG_NIG0_WEIGHT 0x200d4 |
| /* [RW 1] Input nig1 Interface enable. If 0 - the valid input is |
| disregarded; acknowledge output is deasserted; all other signals are |
| treated as usual; if 1 - normal activity. */ |
| #define XCM_REG_NIG1_IFEN 0x2003c |
| /* [RC 1] Set at message length mismatch (relative to last indication) at |
| the nig1 interface. */ |
| #define XCM_REG_NIG1_LENGTH_MIS 0x2023c |
| /* [RW 5] The number of double REG-pairs; loaded from the STORM context and |
| sent to STORM; for a specific connection type. The double REG-pairs are |
| used in order to align to STORM context row size of 128 bits. The offset |
| of these data in the STORM context is always 0. Index _i stands for the |
| connection type (one of 16). */ |
| #define XCM_REG_N_SM_CTX_LD_0 0x20060 |
| #define XCM_REG_N_SM_CTX_LD_1 0x20064 |
| #define XCM_REG_N_SM_CTX_LD_2 0x20068 |
| #define XCM_REG_N_SM_CTX_LD_3 0x2006c |
| #define XCM_REG_N_SM_CTX_LD_4 0x20070 |
| #define XCM_REG_N_SM_CTX_LD_5 0x20074 |
| /* [RW 1] Input pbf Interface enable. If 0 - the valid input is disregarded; |
| acknowledge output is deasserted; all other signals are treated as usual; |
| if 1 - normal activity. */ |
| #define XCM_REG_PBF_IFEN 0x20034 |
| /* [RC 1] Set at message length mismatch (relative to last indication) at |
| the pbf interface. */ |
| #define XCM_REG_PBF_LENGTH_MIS 0x20234 |
| /* [RW 3] The weight of the input pbf in the WRR mechanism. 0 stands for |
| weight 8 (the most prioritised); 1 stands for weight 1(least |
| prioritised); 2 stands for weight 2; tc. */ |
| #define XCM_REG_PBF_WEIGHT 0x200d0 |
| #define XCM_REG_PHYS_QNUM3_0 0x20100 |
| #define XCM_REG_PHYS_QNUM3_1 0x20104 |
| /* [RW 8] The Event ID for Timers formatting in case of stop done. */ |
| #define XCM_REG_STOP_EVNT_ID 0x200b8 |
| /* [RC 1] Set at message length mismatch (relative to last indication) at |
| the STORM interface. */ |
| #define XCM_REG_STORM_LENGTH_MIS 0x2021c |
| /* [RW 3] The weight of the STORM input in the WRR mechanism. 0 stands for |
| weight 8 (the most prioritised); 1 stands for weight 1(least |
| prioritised); 2 stands for weight 2; tc. */ |
| #define XCM_REG_STORM_WEIGHT 0x200bc |
| /* [RW 1] STORM - CM Interface enable. If 0 - the valid input is |
| disregarded; acknowledge output is deasserted; all other signals are |
| treated as usual; if 1 - normal activity. */ |
| #define XCM_REG_STORM_XCM_IFEN 0x20010 |
| /* [RW 4] Timers output initial credit. Max credit available - 15.Write |
| writes the initial credit value; read returns the current value of the |
| credit counter. Must be initialized to 4 at start-up. */ |
| #define XCM_REG_TM_INIT_CRD 0x2041c |
| /* [RW 3] The weight of the Timers input in the WRR mechanism. 0 stands for |
| weight 8 (the most prioritised); 1 stands for weight 1(least |
| prioritised); 2 stands for weight 2; tc. */ |
| #define XCM_REG_TM_WEIGHT 0x200ec |
| /* [RW 28] The CM header for Timers expiration command. */ |
| #define XCM_REG_TM_XCM_HDR 0x200a8 |
| /* [RW 1] Timers - CM Interface enable. If 0 - the valid input is |
| disregarded; acknowledge output is deasserted; all other signals are |
| treated as usual; if 1 - normal activity. */ |
| #define XCM_REG_TM_XCM_IFEN 0x2001c |
| /* [RW 1] Input tsem Interface enable. If 0 - the valid input is |
| disregarded; acknowledge output is deasserted; all other signals are |
| treated as usual; if 1 - normal activity. */ |
| #define XCM_REG_TSEM_IFEN 0x20024 |
| /* [RC 1] Set at message length mismatch (relative to last indication) at |
| the tsem interface. */ |
| #define XCM_REG_TSEM_LENGTH_MIS 0x20224 |
| /* [RW 3] The weight of the input tsem in the WRR mechanism. 0 stands for |
| weight 8 (the most prioritised); 1 stands for weight 1(least |
| prioritised); 2 stands for weight 2; tc. */ |
| #define XCM_REG_TSEM_WEIGHT 0x200c0 |
| /* [RW 2] The queue index for registration on UNA greater NXT decision rule. */ |
| #define XCM_REG_UNA_GT_NXT_Q 0x20120 |
| /* [RW 1] Input usem Interface enable. If 0 - the valid input is |
| disregarded; acknowledge output is deasserted; all other signals are |
| treated as usual; if 1 - normal activity. */ |
| #define XCM_REG_USEM_IFEN 0x2002c |
| /* [RC 1] Message length mismatch (relative to last indication) at the usem |
| interface. */ |
| #define XCM_REG_USEM_LENGTH_MIS 0x2022c |
| /* [RW 3] The weight of the input usem in the WRR mechanism. 0 stands for |
| weight 8 (the most prioritised); 1 stands for weight 1(least |
| prioritised); 2 stands for weight 2; tc. */ |
| #define XCM_REG_USEM_WEIGHT 0x200c8 |
| #define XCM_REG_WU_DA_CNT_CMD00 0x201d4 |
| #define XCM_REG_WU_DA_CNT_CMD01 0x201d8 |
| #define XCM_REG_WU_DA_CNT_CMD10 0x201dc |
| #define XCM_REG_WU_DA_CNT_CMD11 0x201e0 |
| #define XCM_REG_WU_DA_CNT_UPD_VAL00 0x201e4 |
| #define XCM_REG_WU_DA_CNT_UPD_VAL01 0x201e8 |
| #define XCM_REG_WU_DA_CNT_UPD_VAL10 0x201ec |
| #define XCM_REG_WU_DA_CNT_UPD_VAL11 0x201f0 |
| #define XCM_REG_WU_DA_SET_TMR_CNT_FLG_CMD00 0x201c4 |
| #define XCM_REG_WU_DA_SET_TMR_CNT_FLG_CMD01 0x201c8 |
| #define XCM_REG_WU_DA_SET_TMR_CNT_FLG_CMD10 0x201cc |
| #define XCM_REG_WU_DA_SET_TMR_CNT_FLG_CMD11 0x201d0 |
| /* [RW 1] CM - CFC Interface enable. If 0 - the valid input is disregarded; |
| acknowledge output is deasserted; all other signals are treated as usual; |
| if 1 - normal activity. */ |
| #define XCM_REG_XCM_CFC_IFEN 0x20050 |
| /* [RW 14] Interrupt mask register #0 read/write */ |
| #define XCM_REG_XCM_INT_MASK 0x202b4 |
| /* [R 14] Interrupt register #0 read */ |
| #define XCM_REG_XCM_INT_STS 0x202a8 |
| /* [RW 30] Parity mask register #0 read/write */ |
| #define XCM_REG_XCM_PRTY_MASK 0x202c4 |
| /* [R 30] Parity register #0 read */ |
| #define XCM_REG_XCM_PRTY_STS 0x202b8 |
| /* [RC 30] Parity register #0 read clear */ |
| #define XCM_REG_XCM_PRTY_STS_CLR 0x202bc |
| |
| /* [RW 4] The size of AG context region 0 in REG-pairs. Designates the MS |
| REG-pair number (e.g. if region 0 is 6 REG-pairs; the value should be 5). |
| Is used to determine the number of the AG context REG-pairs written back; |
| when the Reg1WbFlg isn't set. */ |
| #define XCM_REG_XCM_REG0_SZ 0x200f4 |
| /* [RW 1] CM - STORM 0 Interface enable. If 0 - the acknowledge input is |
| disregarded; valid is deasserted; all other signals are treated as usual; |
| if 1 - normal activity. */ |
| #define XCM_REG_XCM_STORM0_IFEN 0x20004 |
| /* [RW 1] CM - STORM 1 Interface enable. If 0 - the acknowledge input is |
| disregarded; valid is deasserted; all other signals are treated as usual; |
| if 1 - normal activity. */ |
| #define XCM_REG_XCM_STORM1_IFEN 0x20008 |
| /* [RW 1] CM - Timers Interface enable. If 0 - the valid input is |
| disregarded; acknowledge output is deasserted; all other signals are |
| treated as usual; if 1 - normal activity. */ |
| #define XCM_REG_XCM_TM_IFEN 0x20020 |
| /* [RW 1] CM - QM Interface enable. If 0 - the acknowledge input is |
| disregarded; valid is deasserted; all other signals are treated as usual; |
| if 1 - normal activity. */ |
| #define XCM_REG_XCM_XQM_IFEN 0x2000c |
| /* [RW 1] If set the Q index; received from the QM is inserted to event ID. */ |
| #define XCM_REG_XCM_XQM_USE_Q 0x200f0 |
| /* [RW 4] The value by which CFC updates the activity counter at QM bypass. */ |
| #define XCM_REG_XQM_BYP_ACT_UPD 0x200fc |
| /* [RW 6] QM output initial credit. Max credit available - 32.Write writes |
| the initial credit value; read returns the current value of the credit |
| counter. Must be initialized to 32 at start-up. */ |
| #define XCM_REG_XQM_INIT_CRD 0x20420 |
| /* [RW 3] The weight of the QM (primary) input in the WRR mechanism. 0 |
| stands for weight 8 (the most prioritised); 1 stands for weight 1(least |
| prioritised); 2 stands for weight 2; tc. */ |
| #define XCM_REG_XQM_P_WEIGHT 0x200e4 |
| /* [RW 3] The weight of the QM (secondary) input in the WRR mechanism. 0 |
| stands for weight 8 (the most prioritised); 1 stands for weight 1(least |
| prioritised); 2 stands for weight 2; tc. */ |
| #define XCM_REG_XQM_S_WEIGHT 0x200e8 |
| /* [RW 28] The CM header value for QM request (primary). */ |
| #define XCM_REG_XQM_XCM_HDR_P 0x200a0 |
| /* [RW 28] The CM header value for QM request (secondary). */ |
| #define XCM_REG_XQM_XCM_HDR_S 0x200a4 |
| /* [RW 1] QM - CM Interface enable. If 0 - the valid input is disregarded; |
| acknowledge output is deasserted; all other signals are treated as usual; |
| if 1 - normal activity. */ |
| #define XCM_REG_XQM_XCM_IFEN 0x20014 |
| /* [RW 1] Input SDM Interface enable. If 0 - the valid input is disregarded; |
| acknowledge output is deasserted; all other signals are treated as usual; |
| if 1 - normal activity. */ |
| #define XCM_REG_XSDM_IFEN 0x20018 |
| /* [RC 1] Set at message length mismatch (relative to last indication) at |
| the SDM interface. */ |
| #define XCM_REG_XSDM_LENGTH_MIS 0x20220 |
| /* [RW 3] The weight of the SDM input in the WRR mechanism. 0 stands for |
| weight 8 (the most prioritised); 1 stands for weight 1(least |
| prioritised); 2 stands for weight 2; tc. */ |
| #define XCM_REG_XSDM_WEIGHT 0x200e0 |
| /* [RW 17] Indirect access to the descriptor table of the XX protection |
| mechanism. The fields are: [5:0] - message length; 11:6] - message |
| pointer; 16:12] - next pointer. */ |
| #define XCM_REG_XX_DESCR_TABLE 0x20480 |
| #define XCM_REG_XX_DESCR_TABLE_SIZE 32 |
| /* [R 6] Used to read the XX protection Free counter. */ |
| #define XCM_REG_XX_FREE 0x20240 |
| /* [RW 6] Initial value for the credit counter; responsible for fulfilling |
| of the Input Stage XX protection buffer by the XX protection pending |
| messages. Max credit available - 3.Write writes the initial credit value; |
| read returns the current value of the credit counter. Must be initialized |
| to 2 at start-up. */ |
| #define XCM_REG_XX_INIT_CRD 0x20424 |
| /* [RW 6] The maximum number of pending messages; which may be stored in XX |
| protection. ~xcm_registers_xx_free.xx_free read on read. */ |
| #define XCM_REG_XX_MSG_NUM 0x20428 |
| /* [RW 8] The Event ID; sent to the STORM in case of XX overflow. */ |
| #define XCM_REG_XX_OVFL_EVNT_ID 0x20058 |
| #define XMAC_CLEAR_RX_LSS_STATUS_REG_CLEAR_LOCAL_FAULT_STATUS (0x1<<0) |
| #define XMAC_CLEAR_RX_LSS_STATUS_REG_CLEAR_REMOTE_FAULT_STATUS (0x1<<1) |
| #define XMAC_CTRL_REG_LINE_LOCAL_LPBK (0x1<<2) |
| #define XMAC_CTRL_REG_RX_EN (0x1<<1) |
| #define XMAC_CTRL_REG_SOFT_RESET (0x1<<6) |
| #define XMAC_CTRL_REG_TX_EN (0x1<<0) |
| #define XMAC_PAUSE_CTRL_REG_RX_PAUSE_EN (0x1<<18) |
| #define XMAC_PAUSE_CTRL_REG_TX_PAUSE_EN (0x1<<17) |
| #define XMAC_PFC_CTRL_HI_REG_FORCE_PFC_XON (0x1<<1) |
| #define XMAC_PFC_CTRL_HI_REG_PFC_REFRESH_EN (0x1<<0) |
| #define XMAC_PFC_CTRL_HI_REG_PFC_STATS_EN (0x1<<3) |
| #define XMAC_PFC_CTRL_HI_REG_RX_PFC_EN (0x1<<4) |
| #define XMAC_PFC_CTRL_HI_REG_TX_PFC_EN (0x1<<5) |
| #define XMAC_REG_CLEAR_RX_LSS_STATUS 0x60 |
| #define XMAC_REG_CTRL 0 |
| /* [RW 16] Upper 48 bits of ctrl_sa register. Used as the SA in PAUSE/PFC |
| * packets transmitted by the MAC */ |
| #define XMAC_REG_CTRL_SA_HI 0x2c |
| /* [RW 32] Lower 48 bits of ctrl_sa register. Used as the SA in PAUSE/PFC |
| * packets transmitted by the MAC */ |
| #define XMAC_REG_CTRL_SA_LO 0x28 |
| #define XMAC_REG_EEE_CTRL 0xd8 |
| #define XMAC_REG_EEE_TIMERS_HI 0xe4 |
| #define XMAC_REG_PAUSE_CTRL 0x68 |
| #define XMAC_REG_PFC_CTRL 0x70 |
| #define XMAC_REG_PFC_CTRL_HI 0x74 |
| #define XMAC_REG_RX_LSS_STATUS 0x58 |
| /* [RW 14] Maximum packet size in receive direction; exclusive of preamble & |
| * CRC in strip mode */ |
| #define XMAC_REG_RX_MAX_SIZE 0x40 |
| #define XMAC_REG_TX_CTRL 0x20 |
| /* [RW 16] Indirect access to the XX table of the XX protection mechanism. |
| The fields are:[4:0] - tail pointer; 9:5] - Link List size; 14:10] - |
| header pointer. */ |
| #define XCM_REG_XX_TABLE 0x20500 |
| /* [RW 8] The event id for aggregated interrupt 0 */ |
| #define XSDM_REG_AGG_INT_EVENT_0 0x166038 |
| #define XSDM_REG_AGG_INT_EVENT_1 0x16603c |
| #define XSDM_REG_AGG_INT_EVENT_10 0x166060 |
| #define XSDM_REG_AGG_INT_EVENT_11 0x166064 |
| #define XSDM_REG_AGG_INT_EVENT_12 0x166068 |
| #define XSDM_REG_AGG_INT_EVENT_13 0x16606c |
| #define XSDM_REG_AGG_INT_EVENT_14 0x166070 |
| #define XSDM_REG_AGG_INT_EVENT_2 0x166040 |
| #define XSDM_REG_AGG_INT_EVENT_3 0x166044 |
| #define XSDM_REG_AGG_INT_EVENT_4 0x166048 |
| #define XSDM_REG_AGG_INT_EVENT_5 0x16604c |
| #define XSDM_REG_AGG_INT_EVENT_6 0x166050 |
| #define XSDM_REG_AGG_INT_EVENT_7 0x166054 |
| #define XSDM_REG_AGG_INT_EVENT_8 0x166058 |
| #define XSDM_REG_AGG_INT_EVENT_9 0x16605c |
| /* [RW 1] For each aggregated interrupt index whether the mode is normal (0) |
| or auto-mask-mode (1) */ |
| #define XSDM_REG_AGG_INT_MODE_0 0x1661b8 |
| #define XSDM_REG_AGG_INT_MODE_1 0x1661bc |
| /* [RW 13] The start address in the internal RAM for the cfc_rsp lcid */ |
| #define XSDM_REG_CFC_RSP_START_ADDR 0x166008 |
| /* [RW 16] The maximum value of the completion counter #0 */ |
| #define XSDM_REG_CMP_COUNTER_MAX0 0x16601c |
| /* [RW 16] The maximum value of the completion counter #1 */ |
| #define XSDM_REG_CMP_COUNTER_MAX1 0x166020 |
| /* [RW 16] The maximum value of the completion counter #2 */ |
| #define XSDM_REG_CMP_COUNTER_MAX2 0x166024 |
| /* [RW 16] The maximum value of the completion counter #3 */ |
| #define XSDM_REG_CMP_COUNTER_MAX3 0x166028 |
| /* [RW 13] The start address in the internal RAM for the completion |
| counters. */ |
| #define XSDM_REG_CMP_COUNTER_START_ADDR 0x16600c |
| #define XSDM_REG_ENABLE_IN1 0x166238 |
| #define XSDM_REG_ENABLE_IN2 0x16623c |
| #define XSDM_REG_ENABLE_OUT1 0x166240 |
| #define XSDM_REG_ENABLE_OUT2 0x166244 |
| /* [RW 4] The initial number of messages that can be sent to the pxp control |
| interface without receiving any ACK. */ |
| #define XSDM_REG_INIT_CREDIT_PXP_CTRL 0x1664bc |
| /* [ST 32] The number of ACK after placement messages received */ |
| #define XSDM_REG_NUM_OF_ACK_AFTER_PLACE 0x16627c |
| /* [ST 32] The number of packet end messages received from the parser */ |
| #define XSDM_REG_NUM_OF_PKT_END_MSG 0x166274 |
| /* [ST 32] The number of requests received from the pxp async if */ |
| #define XSDM_REG_NUM_OF_PXP_ASYNC_REQ 0x166278 |
| /* [ST 32] The number of commands received in queue 0 */ |
| #define XSDM_REG_NUM_OF_Q0_CMD 0x166248 |
| /* [ST 32] The number of commands received in queue 10 */ |
| #define XSDM_REG_NUM_OF_Q10_CMD 0x16626c |
| /* [ST 32] The number of commands received in queue 11 */ |
| #define XSDM_REG_NUM_OF_Q11_CMD 0x166270 |
| /* [ST 32] The number of commands received in queue 1 */ |
| #define XSDM_REG_NUM_OF_Q1_CMD 0x16624c |
| /* [ST 32] The number of commands received in queue 3 */ |
| #define XSDM_REG_NUM_OF_Q3_CMD 0x166250 |
| /* [ST 32] The number of commands received in queue 4 */ |
| #define XSDM_REG_NUM_OF_Q4_CMD 0x166254 |
| /* [ST 32] The number of commands received in queue 5 */ |
| #define XSDM_REG_NUM_OF_Q5_CMD 0x166258 |
| /* [ST 32] The number of commands received in queue 6 */ |
| #define XSDM_REG_NUM_OF_Q6_CMD 0x16625c |
| /* [ST 32] The number of commands received in queue 7 */ |
| #define XSDM_REG_NUM_OF_Q7_CMD 0x166260 |
| /* [ST 32] The number of commands received in queue 8 */ |
| #define XSDM_REG_NUM_OF_Q8_CMD 0x166264 |
| /* [ST 32] The number of commands received in queue 9 */ |
| #define XSDM_REG_NUM_OF_Q9_CMD 0x166268 |
| /* [RW 13] The start address in the internal RAM for queue counters */ |
| #define XSDM_REG_Q_COUNTER_START_ADDR 0x166010 |
| /* [W 17] Generate an operation after completion; bit-16 is |
| * AggVectIdx_valid; bits 15:8 are AggVectIdx; bits 7:5 are the TRIG and |
| * bits 4:0 are the T124Param[4:0] */ |
| #define XSDM_REG_OPERATION_GEN 0x1664c4 |
| /* [R 1] pxp_ctrl rd_data fifo empty in sdm_dma_rsp block */ |
| #define XSDM_REG_RSP_PXP_CTRL_RDATA_EMPTY 0x166548 |
| /* [R 1] parser fifo empty in sdm_sync block */ |
| #define XSDM_REG_SYNC_PARSER_EMPTY 0x166550 |
| /* [R 1] parser serial fifo empty in sdm_sync block */ |
| #define XSDM_REG_SYNC_SYNC_EMPTY 0x166558 |
| /* [RW 32] Tick for timer counter. Applicable only when |
| ~xsdm_registers_timer_tick_enable.timer_tick_enable =1 */ |
| #define XSDM_REG_TIMER_TICK 0x166000 |
| /* [RW 32] Interrupt mask register #0 read/write */ |
| #define XSDM_REG_XSDM_INT_MASK_0 0x16629c |
| #define XSDM_REG_XSDM_INT_MASK_1 0x1662ac |
| /* [R 32] Interrupt register #0 read */ |
| #define XSDM_REG_XSDM_INT_STS_0 0x166290 |
| #define XSDM_REG_XSDM_INT_STS_1 0x1662a0 |
| /* [RW 11] Parity mask register #0 read/write */ |
| #define XSDM_REG_XSDM_PRTY_MASK 0x1662bc |
| /* [R 11] Parity register #0 read */ |
| #define XSDM_REG_XSDM_PRTY_STS 0x1662b0 |
| /* [RC 11] Parity register #0 read clear */ |
| #define XSDM_REG_XSDM_PRTY_STS_CLR 0x1662b4 |
| /* [RW 5] The number of time_slots in the arbitration cycle */ |
| #define XSEM_REG_ARB_CYCLE_SIZE 0x280034 |
| /* [RW 3] The source that is associated with arbitration element 0. Source |
| decoding is: 0- foc0; 1-fic1; 2-sleeping thread with priority 0; 3- |
| sleeping thread with priority 1; 4- sleeping thread with priority 2 */ |
| #define XSEM_REG_ARB_ELEMENT0 0x280020 |
| /* [RW 3] The source that is associated with arbitration element 1. Source |
| decoding is: 0- foc0; 1-fic1; 2-sleeping thread with priority 0; 3- |
| sleeping thread with priority 1; 4- sleeping thread with priority 2. |
| Could not be equal to register ~xsem_registers_arb_element0.arb_element0 */ |
| #define XSEM_REG_ARB_ELEMENT1 0x280024 |
| /* [RW 3] The source that is associated with arbitration element 2. Source |
| decoding is: 0- foc0; 1-fic1; 2-sleeping thread with priority 0; 3- |
| sleeping thread with priority 1; 4- sleeping thread with priority 2. |
| Could not be equal to register ~xsem_registers_arb_element0.arb_element0 |
| and ~xsem_registers_arb_element1.arb_element1 */ |
| #define XSEM_REG_ARB_ELEMENT2 0x280028 |
| /* [RW 3] The source that is associated with arbitration element 3. Source |
| decoding is: 0- foc0; 1-fic1; 2-sleeping thread with priority 0; 3- |
| sleeping thread with priority 1; 4- sleeping thread with priority 2.Could |
| not be equal to register ~xsem_registers_arb_element0.arb_element0 and |
| ~xsem_registers_arb_element1.arb_element1 and |
| ~xsem_registers_arb_element2.arb_element2 */ |
| #define XSEM_REG_ARB_ELEMENT3 0x28002c |
| /* [RW 3] The source that is associated with arbitration element 4. Source |
| decoding is: 0- foc0; 1-fic1; 2-sleeping thread with priority 0; 3- |
| sleeping thread with priority 1; 4- sleeping thread with priority 2. |
| Could not be equal to register ~xsem_registers_arb_element0.arb_element0 |
| and ~xsem_registers_arb_element1.arb_element1 and |
| ~xsem_registers_arb_element2.arb_element2 and |
| ~xsem_registers_arb_element3.arb_element3 */ |
| #define XSEM_REG_ARB_ELEMENT4 0x280030 |
| #define XSEM_REG_ENABLE_IN 0x2800a4 |
| #define XSEM_REG_ENABLE_OUT 0x2800a8 |
| /* [RW 32] This address space contains all registers and memories that are |
| placed in SEM_FAST block. The SEM_FAST registers are described in |
| appendix B. In order to access the sem_fast registers the base address |
| ~fast_memory.fast_memory should be added to eachsem_fast register offset. */ |
| #define XSEM_REG_FAST_MEMORY 0x2a0000 |
| /* [RW 1] Disables input messages from FIC0 May be updated during run_time |
| by the microcode */ |
| #define XSEM_REG_FIC0_DISABLE 0x280224 |
| /* [RW 1] Disables input messages from FIC1 May be updated during run_time |
| by the microcode */ |
| #define XSEM_REG_FIC1_DISABLE 0x280234 |
| /* [RW 15] Interrupt table Read and write access to it is not possible in |
| the middle of the work */ |
| #define XSEM_REG_INT_TABLE 0x280400 |
| /* [ST 24] Statistics register. The number of messages that entered through |
| FIC0 */ |
| #define XSEM_REG_MSG_NUM_FIC0 0x280000 |
| /* [ST 24] Statistics register. The number of messages that entered through |
| FIC1 */ |
| #define XSEM_REG_MSG_NUM_FIC1 0x280004 |
| /* [ST 24] Statistics register. The number of messages that were sent to |
| FOC0 */ |
| #define XSEM_REG_MSG_NUM_FOC0 0x280008 |
| /* [ST 24] Statistics register. The number of messages that were sent to |
| FOC1 */ |
| #define XSEM_REG_MSG_NUM_FOC1 0x28000c |
| /* [ST 24] Statistics register. The number of messages that were sent to |
| FOC2 */ |
| #define XSEM_REG_MSG_NUM_FOC2 0x280010 |
| /* [ST 24] Statistics register. The number of messages that were sent to |
| FOC3 */ |
| #define XSEM_REG_MSG_NUM_FOC3 0x280014 |
| /* [RW 1] Disables input messages from the passive buffer May be updated |
| during run_time by the microcode */ |
| #define XSEM_REG_PAS_DISABLE 0x28024c |
| /* [WB 128] Debug only. Passive buffer memory */ |
| #define XSEM_REG_PASSIVE_BUFFER 0x282000 |
| /* [WB 46] pram memory. B45 is parity; b[44:0] - data. */ |
| #define XSEM_REG_PRAM 0x2c0000 |
| /* [R 16] Valid sleeping threads indication have bit per thread */ |
| #define XSEM_REG_SLEEP_THREADS_VALID 0x28026c |
| /* [R 1] EXT_STORE FIFO is empty in sem_slow_ls_ext */ |
| #define XSEM_REG_SLOW_EXT_STORE_EMPTY 0x2802a0 |
| /* [RW 16] List of free threads . There is a bit per thread. */ |
| #define XSEM_REG_THREADS_LIST 0x2802e4 |
| /* [RW 3] The arbitration scheme of time_slot 0 */ |
| #define XSEM_REG_TS_0_AS 0x280038 |
| /* [RW 3] The arbitration scheme of time_slot 10 */ |
| #define XSEM_REG_TS_10_AS 0x280060 |
| /* [RW 3] The arbitration scheme of time_slot 11 */ |
| #define XSEM_REG_TS_11_AS 0x280064 |
| /* [RW 3] The arbitration scheme of time_slot 12 */ |
| #define XSEM_REG_TS_12_AS 0x280068 |
| /* [RW 3] The arbitration scheme of time_slot 13 */ |
| #define XSEM_REG_TS_13_AS 0x28006c |
| /* [RW 3] The arbitration scheme of time_slot 14 */ |
| #define XSEM_REG_TS_14_AS 0x280070 |
| /* [RW 3] The arbitration scheme of time_slot 15 */ |
| #define XSEM_REG_TS_15_AS 0x280074 |
| /* [RW 3] The arbitration scheme of time_slot 16 */ |
| #define XSEM_REG_TS_16_AS 0x280078 |
| /* [RW 3] The arbitration scheme of time_slot 17 */ |
| #define XSEM_REG_TS_17_AS 0x28007c |
| /* [RW 3] The arbitration scheme of time_slot 18 */ |
| #define XSEM_REG_TS_18_AS 0x280080 |
| /* [RW 3] The arbitration scheme of time_slot 1 */ |
| #define XSEM_REG_TS_1_AS 0x28003c |
| /* [RW 3] The arbitration scheme of time_slot 2 */ |
| #define XSEM_REG_TS_2_AS 0x280040 |
| /* [RW 3] The arbitration scheme of time_slot 3 */ |
| #define XSEM_REG_TS_3_AS 0x280044 |
| /* [RW 3] The arbitration scheme of time_slot 4 */ |
| #define XSEM_REG_TS_4_AS 0x280048 |
| /* [RW 3] The arbitration scheme of time_slot 5 */ |
| #define XSEM_REG_TS_5_AS 0x28004c |
| /* [RW 3] The arbitration scheme of time_slot 6 */ |
| #define XSEM_REG_TS_6_AS 0x280050 |
| /* [RW 3] The arbitration scheme of time_slot 7 */ |
| #define XSEM_REG_TS_7_AS 0x280054 |
| /* [RW 3] The arbitration scheme of time_slot 8 */ |
| #define XSEM_REG_TS_8_AS 0x280058 |
| /* [RW 3] The arbitration scheme of time_slot 9 */ |
| #define XSEM_REG_TS_9_AS 0x28005c |
| /* [W 7] VF or PF ID for reset error bit. Values 0-63 reset error bit for 64 |
| * VF; values 64-67 reset error for 4 PF; values 68-127 are not valid. */ |
| #define XSEM_REG_VFPF_ERR_NUM 0x280380 |
| /* [RW 32] Interrupt mask register #0 read/write */ |
| #define XSEM_REG_XSEM_INT_MASK_0 0x280110 |
| #define XSEM_REG_XSEM_INT_MASK_1 0x280120 |
| /* [R 32] Interrupt register #0 read */ |
| #define XSEM_REG_XSEM_INT_STS_0 0x280104 |
| #define XSEM_REG_XSEM_INT_STS_1 0x280114 |
| /* [RW 32] Parity mask register #0 read/write */ |
| #define XSEM_REG_XSEM_PRTY_MASK_0 0x280130 |
| #define XSEM_REG_XSEM_PRTY_MASK_1 0x280140 |
| /* [R 32] Parity register #0 read */ |
| #define XSEM_REG_XSEM_PRTY_STS_0 0x280124 |
| #define XSEM_REG_XSEM_PRTY_STS_1 0x280134 |
| /* [RC 32] Parity register #0 read clear */ |
| #define XSEM_REG_XSEM_PRTY_STS_CLR_0 0x280128 |
| #define XSEM_REG_XSEM_PRTY_STS_CLR_1 0x280138 |
| #define MCPR_ACCESS_LOCK_LOCK (1L<<31) |
| #define MCPR_NVM_ACCESS_ENABLE_EN (1L<<0) |
| #define MCPR_NVM_ACCESS_ENABLE_WR_EN (1L<<1) |
| #define MCPR_NVM_ADDR_NVM_ADDR_VALUE (0xffffffL<<0) |
| #define MCPR_NVM_CFG4_FLASH_SIZE (0x7L<<0) |
| #define MCPR_NVM_COMMAND_DOIT (1L<<4) |
| #define MCPR_NVM_COMMAND_DONE (1L<<3) |
| #define MCPR_NVM_COMMAND_FIRST (1L<<7) |
| #define MCPR_NVM_COMMAND_LAST (1L<<8) |
| #define MCPR_NVM_COMMAND_WR (1L<<5) |
| #define MCPR_NVM_SW_ARB_ARB_ARB1 (1L<<9) |
| #define MCPR_NVM_SW_ARB_ARB_REQ_CLR1 (1L<<5) |
| #define MCPR_NVM_SW_ARB_ARB_REQ_SET1 (1L<<1) |
| #define BIGMAC_REGISTER_BMAC_CONTROL (0x00<<3) |
| #define BIGMAC_REGISTER_BMAC_XGXS_CONTROL (0x01<<3) |
| #define BIGMAC_REGISTER_CNT_MAX_SIZE (0x05<<3) |
| #define BIGMAC_REGISTER_RX_CONTROL (0x21<<3) |
| #define BIGMAC_REGISTER_RX_LLFC_MSG_FLDS (0x46<<3) |
| #define BIGMAC_REGISTER_RX_LSS_STATUS (0x43<<3) |
| #define BIGMAC_REGISTER_RX_MAX_SIZE (0x23<<3) |
| #define BIGMAC_REGISTER_RX_STAT_GR64 (0x26<<3) |
| #define BIGMAC_REGISTER_RX_STAT_GRIPJ (0x42<<3) |
| #define BIGMAC_REGISTER_TX_CONTROL (0x07<<3) |
| #define BIGMAC_REGISTER_TX_MAX_SIZE (0x09<<3) |
| #define BIGMAC_REGISTER_TX_PAUSE_THRESHOLD (0x0A<<3) |
| #define BIGMAC_REGISTER_TX_SOURCE_ADDR (0x08<<3) |
| #define BIGMAC_REGISTER_TX_STAT_GTBYT (0x20<<3) |
| #define BIGMAC_REGISTER_TX_STAT_GTPKT (0x0C<<3) |
| #define BIGMAC2_REGISTER_BMAC_CONTROL (0x00<<3) |
| #define BIGMAC2_REGISTER_BMAC_XGXS_CONTROL (0x01<<3) |
| #define BIGMAC2_REGISTER_CNT_MAX_SIZE (0x05<<3) |
| #define BIGMAC2_REGISTER_PFC_CONTROL (0x06<<3) |
| #define BIGMAC2_REGISTER_RX_CONTROL (0x3A<<3) |
| #define BIGMAC2_REGISTER_RX_LLFC_MSG_FLDS (0x62<<3) |
| #define BIGMAC2_REGISTER_RX_LSS_STAT (0x3E<<3) |
| #define BIGMAC2_REGISTER_RX_MAX_SIZE (0x3C<<3) |
| #define BIGMAC2_REGISTER_RX_STAT_GR64 (0x40<<3) |
| #define BIGMAC2_REGISTER_RX_STAT_GRIPJ (0x5f<<3) |
| #define BIGMAC2_REGISTER_RX_STAT_GRPP (0x51<<3) |
| #define BIGMAC2_REGISTER_TX_CONTROL (0x1C<<3) |
| #define BIGMAC2_REGISTER_TX_MAX_SIZE (0x1E<<3) |
| #define BIGMAC2_REGISTER_TX_PAUSE_CONTROL (0x20<<3) |
| #define BIGMAC2_REGISTER_TX_SOURCE_ADDR (0x1D<<3) |
| #define BIGMAC2_REGISTER_TX_STAT_GTBYT (0x39<<3) |
| #define BIGMAC2_REGISTER_TX_STAT_GTPOK (0x22<<3) |
| #define BIGMAC2_REGISTER_TX_STAT_GTPP (0x24<<3) |
| #define EMAC_LED_1000MB_OVERRIDE (1L<<1) |
| #define EMAC_LED_100MB_OVERRIDE (1L<<2) |
| #define EMAC_LED_10MB_OVERRIDE (1L<<3) |
| #define EMAC_LED_2500MB_OVERRIDE (1L<<12) |
| #define EMAC_LED_OVERRIDE (1L<<0) |
| #define EMAC_LED_TRAFFIC (1L<<6) |
| #define EMAC_MDIO_COMM_COMMAND_ADDRESS (0L<<26) |
| #define EMAC_MDIO_COMM_COMMAND_READ_22 (2L<<26) |
| #define EMAC_MDIO_COMM_COMMAND_READ_45 (3L<<26) |
| #define EMAC_MDIO_COMM_COMMAND_WRITE_22 (1L<<26) |
| #define EMAC_MDIO_COMM_COMMAND_WRITE_45 (1L<<26) |
| #define EMAC_MDIO_COMM_DATA (0xffffL<<0) |
| #define EMAC_MDIO_COMM_START_BUSY (1L<<29) |
| #define EMAC_MDIO_MODE_AUTO_POLL (1L<<4) |
| #define EMAC_MDIO_MODE_CLAUSE_45 (1L<<31) |
| #define EMAC_MDIO_MODE_CLOCK_CNT (0x3ffL<<16) |
| #define EMAC_MDIO_MODE_CLOCK_CNT_BITSHIFT 16 |
| #define EMAC_MDIO_STATUS_10MB (1L<<1) |
| #define EMAC_MODE_25G_MODE (1L<<5) |
| #define EMAC_MODE_HALF_DUPLEX (1L<<1) |
| #define EMAC_MODE_PORT_GMII (2L<<2) |
| #define EMAC_MODE_PORT_MII (1L<<2) |
| #define EMAC_MODE_PORT_MII_10M (3L<<2) |
| #define EMAC_MODE_RESET (1L<<0) |
| #define EMAC_REG_EMAC_LED 0xc |
| #define EMAC_REG_EMAC_MAC_MATCH 0x10 |
| #define EMAC_REG_EMAC_MDIO_COMM 0xac |
| #define EMAC_REG_EMAC_MDIO_MODE 0xb4 |
| #define EMAC_REG_EMAC_MDIO_STATUS 0xb0 |
| #define EMAC_REG_EMAC_MODE 0x0 |
| #define EMAC_REG_EMAC_RX_MODE 0xc8 |
| #define EMAC_REG_EMAC_RX_MTU_SIZE 0x9c |
| #define EMAC_REG_EMAC_RX_STAT_AC 0x180 |
| #define EMAC_REG_EMAC_RX_STAT_AC_28 0x1f4 |
| #define EMAC_REG_EMAC_RX_STAT_AC_COUNT 23 |
| #define EMAC_REG_EMAC_TX_MODE 0xbc |
| #define EMAC_REG_EMAC_TX_STAT_AC 0x280 |
| #define EMAC_REG_EMAC_TX_STAT_AC_COUNT 22 |
| #define EMAC_REG_RX_PFC_MODE 0x320 |
| #define EMAC_REG_RX_PFC_MODE_PRIORITIES (1L<<2) |
| #define EMAC_REG_RX_PFC_MODE_RX_EN (1L<<1) |
| #define EMAC_REG_RX_PFC_MODE_TX_EN (1L<<0) |
| #define EMAC_REG_RX_PFC_PARAM 0x324 |
| #define EMAC_REG_RX_PFC_PARAM_OPCODE_BITSHIFT 0 |
| #define EMAC_REG_RX_PFC_PARAM_PRIORITY_EN_BITSHIFT 16 |
| #define EMAC_REG_RX_PFC_STATS_XOFF_RCVD 0x328 |
| #define EMAC_REG_RX_PFC_STATS_XOFF_RCVD_COUNT (0xffff<<0) |
| #define EMAC_REG_RX_PFC_STATS_XOFF_SENT 0x330 |
| #define EMAC_REG_RX_PFC_STATS_XOFF_SENT_COUNT (0xffff<<0) |
| #define EMAC_REG_RX_PFC_STATS_XON_RCVD 0x32c |
| #define EMAC_REG_RX_PFC_STATS_XON_RCVD_COUNT (0xffff<<0) |
| #define EMAC_REG_RX_PFC_STATS_XON_SENT 0x334 |
| #define EMAC_REG_RX_PFC_STATS_XON_SENT_COUNT (0xffff<<0) |
| #define EMAC_RX_MODE_FLOW_EN (1L<<2) |
| #define EMAC_RX_MODE_KEEP_MAC_CONTROL (1L<<3) |
| #define EMAC_RX_MODE_KEEP_VLAN_TAG (1L<<10) |
| #define EMAC_RX_MODE_PROMISCUOUS (1L<<8) |
| #define EMAC_RX_MODE_RESET (1L<<0) |
| #define EMAC_RX_MTU_SIZE_JUMBO_ENA (1L<<31) |
| #define EMAC_TX_MODE_EXT_PAUSE_EN (1L<<3) |
| #define EMAC_TX_MODE_FLOW_EN (1L<<4) |
| #define EMAC_TX_MODE_RESET (1L<<0) |
| #define MISC_REGISTERS_GPIO_0 0 |
| #define MISC_REGISTERS_GPIO_1 1 |
| #define MISC_REGISTERS_GPIO_2 2 |
| #define MISC_REGISTERS_GPIO_3 3 |
| #define MISC_REGISTERS_GPIO_CLR_POS 16 |
| #define MISC_REGISTERS_GPIO_FLOAT (0xffL<<24) |
| #define MISC_REGISTERS_GPIO_FLOAT_POS 24 |
| #define MISC_REGISTERS_GPIO_HIGH 1 |
| #define MISC_REGISTERS_GPIO_INPUT_HI_Z 2 |
| #define MISC_REGISTERS_GPIO_INT_CLR_POS 24 |
| #define MISC_REGISTERS_GPIO_INT_OUTPUT_CLR 0 |
| #define MISC_REGISTERS_GPIO_INT_OUTPUT_SET 1 |
| #define MISC_REGISTERS_GPIO_INT_SET_POS 16 |
| #define MISC_REGISTERS_GPIO_LOW 0 |
| #define MISC_REGISTERS_GPIO_OUTPUT_HIGH 1 |
| #define MISC_REGISTERS_GPIO_OUTPUT_LOW 0 |
| #define MISC_REGISTERS_GPIO_PORT_SHIFT 4 |
| #define MISC_REGISTERS_GPIO_SET_POS 8 |
| #define MISC_REGISTERS_RESET_REG_1_CLEAR 0x588 |
| #define MISC_REGISTERS_RESET_REG_1_RST_BRB1 (0x1<<0) |
| #define MISC_REGISTERS_RESET_REG_1_RST_DORQ (0x1<<19) |
| #define MISC_REGISTERS_RESET_REG_1_RST_HC (0x1<<29) |
| #define MISC_REGISTERS_RESET_REG_1_RST_NIG (0x1<<7) |
| #define MISC_REGISTERS_RESET_REG_1_RST_PXP (0x1<<26) |
| #define MISC_REGISTERS_RESET_REG_1_RST_PXPV (0x1<<27) |
| #define MISC_REGISTERS_RESET_REG_1_SET 0x584 |
| #define MISC_REGISTERS_RESET_REG_2_CLEAR 0x598 |
| #define MISC_REGISTERS_RESET_REG_2_MSTAT0 (0x1<<24) |
| #define MISC_REGISTERS_RESET_REG_2_MSTAT1 (0x1<<25) |
| #define MISC_REGISTERS_RESET_REG_2_PGLC (0x1<<19) |
| #define MISC_REGISTERS_RESET_REG_2_RST_ATC (0x1<<17) |
| #define MISC_REGISTERS_RESET_REG_2_RST_BMAC0 (0x1<<0) |
| #define MISC_REGISTERS_RESET_REG_2_RST_BMAC1 (0x1<<1) |
| #define MISC_REGISTERS_RESET_REG_2_RST_EMAC0 (0x1<<2) |
| #define MISC_REGISTERS_RESET_REG_2_RST_EMAC0_HARD_CORE (0x1<<14) |
| #define MISC_REGISTERS_RESET_REG_2_RST_EMAC1 (0x1<<3) |
| #define MISC_REGISTERS_RESET_REG_2_RST_EMAC1_HARD_CORE (0x1<<15) |
| #define MISC_REGISTERS_RESET_REG_2_RST_GRC (0x1<<4) |
| #define MISC_REGISTERS_RESET_REG_2_RST_MCP_N_HARD_CORE_RST_B (0x1<<6) |
| #define MISC_REGISTERS_RESET_REG_2_RST_MCP_N_RESET_CMN_CORE (0x1<<8) |
| #define MISC_REGISTERS_RESET_REG_2_RST_MCP_N_RESET_CMN_CPU (0x1<<7) |
| #define MISC_REGISTERS_RESET_REG_2_RST_MCP_N_RESET_REG_HARD_CORE (0x1<<5) |
| #define MISC_REGISTERS_RESET_REG_2_RST_MDIO (0x1<<13) |
| #define MISC_REGISTERS_RESET_REG_2_RST_MISC_CORE (0x1<<11) |
| #define MISC_REGISTERS_RESET_REG_2_RST_PCI_MDIO (0x1<<13) |
| #define MISC_REGISTERS_RESET_REG_2_RST_RBCN (0x1<<9) |
| #define MISC_REGISTERS_RESET_REG_2_SET 0x594 |
| #define MISC_REGISTERS_RESET_REG_2_UMAC0 (0x1<<20) |
| #define MISC_REGISTERS_RESET_REG_2_UMAC1 (0x1<<21) |
| #define MISC_REGISTERS_RESET_REG_2_XMAC (0x1<<22) |
| #define MISC_REGISTERS_RESET_REG_2_XMAC_SOFT (0x1<<23) |
| #define MISC_REGISTERS_RESET_REG_3_CLEAR 0x5a8 |
| #define MISC_REGISTERS_RESET_REG_3_MISC_NIG_MUX_SERDES0_IDDQ (0x1<<1) |
| #define MISC_REGISTERS_RESET_REG_3_MISC_NIG_MUX_SERDES0_PWRDWN (0x1<<2) |
| #define MISC_REGISTERS_RESET_REG_3_MISC_NIG_MUX_SERDES0_PWRDWN_SD (0x1<<3) |
| #define MISC_REGISTERS_RESET_REG_3_MISC_NIG_MUX_SERDES0_RSTB_HW (0x1<<0) |
| #define MISC_REGISTERS_RESET_REG_3_MISC_NIG_MUX_XGXS0_IDDQ (0x1<<5) |
| #define MISC_REGISTERS_RESET_REG_3_MISC_NIG_MUX_XGXS0_PWRDWN (0x1<<6) |
| #define MISC_REGISTERS_RESET_REG_3_MISC_NIG_MUX_XGXS0_PWRDWN_SD (0x1<<7) |
| #define MISC_REGISTERS_RESET_REG_3_MISC_NIG_MUX_XGXS0_RSTB_HW (0x1<<4) |
| #define MISC_REGISTERS_RESET_REG_3_MISC_NIG_MUX_XGXS0_TXD_FIFO_RSTB (0x1<<8) |
| #define MISC_REGISTERS_RESET_REG_3_SET 0x5a4 |
| #define MISC_REGISTERS_SPIO_4 4 |
| #define MISC_REGISTERS_SPIO_5 5 |
| #define MISC_REGISTERS_SPIO_7 7 |
| #define MISC_REGISTERS_SPIO_CLR_POS 16 |
| #define MISC_REGISTERS_SPIO_FLOAT (0xffL<<24) |
| #define MISC_REGISTERS_SPIO_FLOAT_POS 24 |
| #define MISC_REGISTERS_SPIO_INPUT_HI_Z 2 |
| #define MISC_REGISTERS_SPIO_INT_OLD_SET_POS 16 |
| #define MISC_REGISTERS_SPIO_OUTPUT_HIGH 1 |
| #define MISC_REGISTERS_SPIO_OUTPUT_LOW 0 |
| #define MISC_REGISTERS_SPIO_SET_POS 8 |
| #define HW_LOCK_MAX_RESOURCE_VALUE 31 |
| #define HW_LOCK_RESOURCE_DCBX_ADMIN_MIB 13 |
| #define HW_LOCK_RESOURCE_DRV_FLAGS 10 |
| #define HW_LOCK_RESOURCE_GPIO 1 |
| #define HW_LOCK_RESOURCE_MDIO 0 |
| #define HW_LOCK_RESOURCE_NVRAM 12 |
| #define HW_LOCK_RESOURCE_PORT0_ATT_MASK 3 |
| #define HW_LOCK_RESOURCE_RECOVERY_LEADER_0 8 |
| #define HW_LOCK_RESOURCE_RECOVERY_LEADER_1 9 |
| #define HW_LOCK_RESOURCE_RECOVERY_REG 11 |
| #define HW_LOCK_RESOURCE_RESET 5 |
| #define HW_LOCK_RESOURCE_SPIO 2 |
| #define AEU_INPUTS_ATTN_BITS_ATC_HW_INTERRUPT (0x1<<4) |
| #define AEU_INPUTS_ATTN_BITS_ATC_PARITY_ERROR (0x1<<5) |
| #define AEU_INPUTS_ATTN_BITS_BRB_PARITY_ERROR (0x1<<18) |
| #define AEU_INPUTS_ATTN_BITS_CCM_HW_INTERRUPT (0x1<<31) |
| #define AEU_INPUTS_ATTN_BITS_CCM_PARITY_ERROR (0x1<<30) |
| #define AEU_INPUTS_ATTN_BITS_CDU_HW_INTERRUPT (0x1<<9) |
| #define AEU_INPUTS_ATTN_BITS_CDU_PARITY_ERROR (0x1<<8) |
| #define AEU_INPUTS_ATTN_BITS_CFC_HW_INTERRUPT (0x1<<7) |
| #define AEU_INPUTS_ATTN_BITS_CFC_PARITY_ERROR (0x1<<6) |
| #define AEU_INPUTS_ATTN_BITS_CSDM_HW_INTERRUPT (0x1<<29) |
| #define AEU_INPUTS_ATTN_BITS_CSDM_PARITY_ERROR (0x1<<28) |
| #define AEU_INPUTS_ATTN_BITS_CSEMI_HW_INTERRUPT (0x1<<1) |
| #define AEU_INPUTS_ATTN_BITS_CSEMI_PARITY_ERROR (0x1<<0) |
| #define AEU_INPUTS_ATTN_BITS_DEBUG_PARITY_ERROR (0x1<<18) |
| #define AEU_INPUTS_ATTN_BITS_DMAE_HW_INTERRUPT (0x1<<11) |
| #define AEU_INPUTS_ATTN_BITS_DMAE_PARITY_ERROR (0x1<<10) |
| #define AEU_INPUTS_ATTN_BITS_DOORBELLQ_HW_INTERRUPT (0x1<<13) |
| #define AEU_INPUTS_ATTN_BITS_DOORBELLQ_PARITY_ERROR (0x1<<12) |
| #define AEU_INPUTS_ATTN_BITS_GPIO0_FUNCTION_0 (0x1<<2) |
| #define AEU_INPUTS_ATTN_BITS_IGU_PARITY_ERROR (0x1<<12) |
| #define AEU_INPUTS_ATTN_BITS_MCP_LATCHED_ROM_PARITY (0x1<<28) |
| #define AEU_INPUTS_ATTN_BITS_MCP_LATCHED_SCPAD_PARITY (0x1<<31) |
| #define AEU_INPUTS_ATTN_BITS_MCP_LATCHED_UMP_RX_PARITY (0x1<<29) |
| #define AEU_INPUTS_ATTN_BITS_MCP_LATCHED_UMP_TX_PARITY (0x1<<30) |
| #define AEU_INPUTS_ATTN_BITS_MISC_HW_INTERRUPT (0x1<<15) |
| #define AEU_INPUTS_ATTN_BITS_MISC_PARITY_ERROR (0x1<<14) |
| #define AEU_INPUTS_ATTN_BITS_NIG_PARITY_ERROR (0x1<<14) |
| #define AEU_INPUTS_ATTN_BITS_PARSER_PARITY_ERROR (0x1<<20) |
| #define AEU_INPUTS_ATTN_BITS_PBCLIENT_HW_INTERRUPT (0x1<<31) |
| #define AEU_INPUTS_ATTN_BITS_PBCLIENT_PARITY_ERROR (0x1<<30) |
| #define AEU_INPUTS_ATTN_BITS_PBF_PARITY_ERROR (0x1<<0) |
| #define AEU_INPUTS_ATTN_BITS_PGLUE_HW_INTERRUPT (0x1<<2) |
| #define AEU_INPUTS_ATTN_BITS_PGLUE_PARITY_ERROR (0x1<<3) |
| #define AEU_INPUTS_ATTN_BITS_PXPPCICLOCKCLIENT_HW_INTERRUPT (0x1<<5) |
| #define AEU_INPUTS_ATTN_BITS_PXPPCICLOCKCLIENT_PARITY_ERROR (0x1<<4) |
| #define AEU_INPUTS_ATTN_BITS_PXP_HW_INTERRUPT (0x1<<3) |
| #define AEU_INPUTS_ATTN_BITS_PXP_PARITY_ERROR (0x1<<2) |
| #define AEU_INPUTS_ATTN_BITS_QM_HW_INTERRUPT (0x1<<3) |
| #define AEU_INPUTS_ATTN_BITS_QM_PARITY_ERROR (0x1<<2) |
| #define AEU_INPUTS_ATTN_BITS_SEARCHER_PARITY_ERROR (0x1<<22) |
| #define AEU_INPUTS_ATTN_BITS_SPIO5 (0x1<<15) |
| #define AEU_INPUTS_ATTN_BITS_TCM_HW_INTERRUPT (0x1<<27) |
| #define AEU_INPUTS_ATTN_BITS_TCM_PARITY_ERROR (0x1<<26) |
| #define AEU_INPUTS_ATTN_BITS_TIMERS_HW_INTERRUPT (0x1<<5) |
| #define AEU_INPUTS_ATTN_BITS_TIMERS_PARITY_ERROR (0x1<<4) |
| #define AEU_INPUTS_ATTN_BITS_TSDM_HW_INTERRUPT (0x1<<25) |
| #define AEU_INPUTS_ATTN_BITS_TSDM_PARITY_ERROR (0x1<<24) |
| #define AEU_INPUTS_ATTN_BITS_TSEMI_HW_INTERRUPT (0x1<<29) |
| #define AEU_INPUTS_ATTN_BITS_TSEMI_PARITY_ERROR (0x1<<28) |
| #define AEU_INPUTS_ATTN_BITS_UCM_HW_INTERRUPT (0x1<<23) |
| #define AEU_INPUTS_ATTN_BITS_UCM_PARITY_ERROR (0x1<<22) |
| #define AEU_INPUTS_ATTN_BITS_UPB_HW_INTERRUPT (0x1<<27) |
| #define AEU_INPUTS_ATTN_BITS_UPB_PARITY_ERROR (0x1<<26) |
| #define AEU_INPUTS_ATTN_BITS_USDM_HW_INTERRUPT (0x1<<21) |
| #define AEU_INPUTS_ATTN_BITS_USDM_PARITY_ERROR (0x1<<20) |
| #define AEU_INPUTS_ATTN_BITS_USEMI_HW_INTERRUPT (0x1<<25) |
| #define AEU_INPUTS_ATTN_BITS_USEMI_PARITY_ERROR (0x1<<24) |
| #define AEU_INPUTS_ATTN_BITS_VAUX_PCI_CORE_PARITY_ERROR (0x1<<16) |
| #define AEU_INPUTS_ATTN_BITS_XCM_HW_INTERRUPT (0x1<<9) |
| #define AEU_INPUTS_ATTN_BITS_XCM_PARITY_ERROR (0x1<<8) |
| #define AEU_INPUTS_ATTN_BITS_XSDM_HW_INTERRUPT (0x1<<7) |
| #define AEU_INPUTS_ATTN_BITS_XSDM_PARITY_ERROR (0x1<<6) |
| #define AEU_INPUTS_ATTN_BITS_XSEMI_HW_INTERRUPT (0x1<<11) |
| #define AEU_INPUTS_ATTN_BITS_XSEMI_PARITY_ERROR (0x1<<10) |
| |
| #define AEU_INPUTS_ATTN_BITS_GPIO3_FUNCTION_0 (0x1<<5) |
| #define AEU_INPUTS_ATTN_BITS_GPIO3_FUNCTION_1 (0x1<<9) |
| |
| #define RESERVED_GENERAL_ATTENTION_BIT_0 0 |
| |
| #define EVEREST_GEN_ATTN_IN_USE_MASK 0x7ffe0 |
| #define EVEREST_LATCHED_ATTN_IN_USE_MASK 0xffe00000 |
| |
| #define RESERVED_GENERAL_ATTENTION_BIT_6 6 |
| #define RESERVED_GENERAL_ATTENTION_BIT_7 7 |
| #define RESERVED_GENERAL_ATTENTION_BIT_8 8 |
| #define RESERVED_GENERAL_ATTENTION_BIT_9 9 |
| #define RESERVED_GENERAL_ATTENTION_BIT_10 10 |
| #define RESERVED_GENERAL_ATTENTION_BIT_11 11 |
| #define RESERVED_GENERAL_ATTENTION_BIT_12 12 |
| #define RESERVED_GENERAL_ATTENTION_BIT_13 13 |
| #define RESERVED_GENERAL_ATTENTION_BIT_14 14 |
| #define RESERVED_GENERAL_ATTENTION_BIT_15 15 |
| #define RESERVED_GENERAL_ATTENTION_BIT_16 16 |
| #define RESERVED_GENERAL_ATTENTION_BIT_17 17 |
| #define RESERVED_GENERAL_ATTENTION_BIT_18 18 |
| #define RESERVED_GENERAL_ATTENTION_BIT_19 19 |
| #define RESERVED_GENERAL_ATTENTION_BIT_20 20 |
| #define RESERVED_GENERAL_ATTENTION_BIT_21 21 |
| |
| /* storm asserts attention bits */ |
| #define TSTORM_FATAL_ASSERT_ATTENTION_BIT RESERVED_GENERAL_ATTENTION_BIT_7 |
| #define USTORM_FATAL_ASSERT_ATTENTION_BIT RESERVED_GENERAL_ATTENTION_BIT_8 |
| #define CSTORM_FATAL_ASSERT_ATTENTION_BIT RESERVED_GENERAL_ATTENTION_BIT_9 |
| #define XSTORM_FATAL_ASSERT_ATTENTION_BIT RESERVED_GENERAL_ATTENTION_BIT_10 |
| |
| /* mcp error attention bit */ |
| #define MCP_FATAL_ASSERT_ATTENTION_BIT RESERVED_GENERAL_ATTENTION_BIT_11 |
| |
| /*E1H NIG status sync attention mapped to group 4-7*/ |
| #define LINK_SYNC_ATTENTION_BIT_FUNC_0 RESERVED_GENERAL_ATTENTION_BIT_12 |
| #define LINK_SYNC_ATTENTION_BIT_FUNC_1 RESERVED_GENERAL_ATTENTION_BIT_13 |
| #define LINK_SYNC_ATTENTION_BIT_FUNC_2 RESERVED_GENERAL_ATTENTION_BIT_14 |
| #define LINK_SYNC_ATTENTION_BIT_FUNC_3 RESERVED_GENERAL_ATTENTION_BIT_15 |
| #define LINK_SYNC_ATTENTION_BIT_FUNC_4 RESERVED_GENERAL_ATTENTION_BIT_16 |
| #define LINK_SYNC_ATTENTION_BIT_FUNC_5 RESERVED_GENERAL_ATTENTION_BIT_17 |
| #define LINK_SYNC_ATTENTION_BIT_FUNC_6 RESERVED_GENERAL_ATTENTION_BIT_18 |
| #define LINK_SYNC_ATTENTION_BIT_FUNC_7 RESERVED_GENERAL_ATTENTION_BIT_19 |
| |
| |
| #define LATCHED_ATTN_RBCR 23 |
| #define LATCHED_ATTN_RBCT 24 |
| #define LATCHED_ATTN_RBCN 25 |
| #define LATCHED_ATTN_RBCU 26 |
| #define LATCHED_ATTN_RBCP 27 |
| #define LATCHED_ATTN_TIMEOUT_GRC 28 |
| #define LATCHED_ATTN_RSVD_GRC 29 |
| #define LATCHED_ATTN_ROM_PARITY_MCP 30 |
| #define LATCHED_ATTN_UM_RX_PARITY_MCP 31 |
| #define LATCHED_ATTN_UM_TX_PARITY_MCP 32 |
| #define LATCHED_ATTN_SCPAD_PARITY_MCP 33 |
| |
| #define GENERAL_ATTEN_WORD(atten_name) ((94 + atten_name) / 32) |
| #define GENERAL_ATTEN_OFFSET(atten_name)\ |
| (1UL << ((94 + atten_name) % 32)) |
| /* |
| * This file defines GRC base address for every block. |
| * This file is included by chipsim, asm microcode and cpp microcode. |
| * These values are used in Design.xml on regBase attribute |
| * Use the base with the generated offsets of specific registers. |
| */ |
| |
| #define GRCBASE_PXPCS 0x000000 |
| #define GRCBASE_PCICONFIG 0x002000 |
| #define GRCBASE_PCIREG 0x002400 |
| #define GRCBASE_EMAC0 0x008000 |
| #define GRCBASE_EMAC1 0x008400 |
| #define GRCBASE_DBU 0x008800 |
| #define GRCBASE_MISC 0x00A000 |
| #define GRCBASE_DBG 0x00C000 |
| #define GRCBASE_NIG 0x010000 |
| #define GRCBASE_XCM 0x020000 |
| #define GRCBASE_PRS 0x040000 |
| #define GRCBASE_SRCH 0x040400 |
| #define GRCBASE_TSDM 0x042000 |
| #define GRCBASE_TCM 0x050000 |
| #define GRCBASE_BRB1 0x060000 |
| #define GRCBASE_MCP 0x080000 |
| #define GRCBASE_UPB 0x0C1000 |
| #define GRCBASE_CSDM 0x0C2000 |
| #define GRCBASE_USDM 0x0C4000 |
| #define GRCBASE_CCM 0x0D0000 |
| #define GRCBASE_UCM 0x0E0000 |
| #define GRCBASE_CDU 0x101000 |
| #define GRCBASE_DMAE 0x102000 |
| #define GRCBASE_PXP 0x103000 |
| #define GRCBASE_CFC 0x104000 |
| #define GRCBASE_HC 0x108000 |
| #define GRCBASE_PXP2 0x120000 |
| #define GRCBASE_PBF 0x140000 |
| #define GRCBASE_UMAC0 0x160000 |
| #define GRCBASE_UMAC1 0x160400 |
| #define GRCBASE_XPB 0x161000 |
| #define GRCBASE_MSTAT0 0x162000 |
| #define GRCBASE_MSTAT1 0x162800 |
| #define GRCBASE_XMAC0 0x163000 |
| #define GRCBASE_XMAC1 0x163800 |
| #define GRCBASE_TIMERS 0x164000 |
| #define GRCBASE_XSDM 0x166000 |
| #define GRCBASE_QM 0x168000 |
| #define GRCBASE_DQ 0x170000 |
| #define GRCBASE_TSEM 0x180000 |
| #define GRCBASE_CSEM 0x200000 |
| #define GRCBASE_XSEM 0x280000 |
| #define GRCBASE_USEM 0x300000 |
| #define GRCBASE_MISC_AEU GRCBASE_MISC |
| |
| |
| /* offset of configuration space in the pci core register */ |
| #define PCICFG_OFFSET 0x2000 |
| #define PCICFG_VENDOR_ID_OFFSET 0x00 |
| #define PCICFG_DEVICE_ID_OFFSET 0x02 |
| #define PCICFG_COMMAND_OFFSET 0x04 |
| #define PCICFG_COMMAND_IO_SPACE (1<<0) |
| #define PCICFG_COMMAND_MEM_SPACE (1<<1) |
| #define PCICFG_COMMAND_BUS_MASTER (1<<2) |
| #define PCICFG_COMMAND_SPECIAL_CYCLES (1<<3) |
| #define PCICFG_COMMAND_MWI_CYCLES (1<<4) |
| #define PCICFG_COMMAND_VGA_SNOOP (1<<5) |
| #define PCICFG_COMMAND_PERR_ENA (1<<6) |
| #define PCICFG_COMMAND_STEPPING (1<<7) |
| #define PCICFG_COMMAND_SERR_ENA (1<<8) |
| #define PCICFG_COMMAND_FAST_B2B (1<<9) |
| #define PCICFG_COMMAND_INT_DISABLE (1<<10) |
| #define PCICFG_COMMAND_RESERVED (0x1f<<11) |
| #define PCICFG_STATUS_OFFSET 0x06 |
| #define PCICFG_REVESION_ID_OFFSET 0x08 |
| #define PCICFG_CACHE_LINE_SIZE 0x0c |
| #define PCICFG_LATENCY_TIMER 0x0d |
| #define PCICFG_BAR_1_LOW 0x10 |
| #define PCICFG_BAR_1_HIGH 0x14 |
| #define PCICFG_BAR_2_LOW 0x18 |
| #define PCICFG_BAR_2_HIGH 0x1c |
| #define PCICFG_SUBSYSTEM_VENDOR_ID_OFFSET 0x2c |
| #define PCICFG_SUBSYSTEM_ID_OFFSET 0x2e |
| #define PCICFG_INT_LINE 0x3c |
| #define PCICFG_INT_PIN 0x3d |
| #define PCICFG_PM_CAPABILITY 0x48 |
| #define PCICFG_PM_CAPABILITY_VERSION (0x3<<16) |
| #define PCICFG_PM_CAPABILITY_CLOCK (1<<19) |
| #define PCICFG_PM_CAPABILITY_RESERVED (1<<20) |
| #define PCICFG_PM_CAPABILITY_DSI (1<<21) |
| #define PCICFG_PM_CAPABILITY_AUX_CURRENT (0x7<<22) |
| #define PCICFG_PM_CAPABILITY_D1_SUPPORT (1<<25) |
| #define PCICFG_PM_CAPABILITY_D2_SUPPORT (1<<26) |
| #define PCICFG_PM_CAPABILITY_PME_IN_D0 (1<<27) |
| #define PCICFG_PM_CAPABILITY_PME_IN_D1 (1<<28) |
| #define PCICFG_PM_CAPABILITY_PME_IN_D2 (1<<29) |
| #define PCICFG_PM_CAPABILITY_PME_IN_D3_HOT (1<<30) |
| #define PCICFG_PM_CAPABILITY_PME_IN_D3_COLD (1<<31) |
| #define PCICFG_PM_CSR_OFFSET 0x4c |
| #define PCICFG_PM_CSR_STATE (0x3<<0) |
| #define PCICFG_PM_CSR_PME_ENABLE (1<<8) |
| #define PCICFG_PM_CSR_PME_STATUS (1<<15) |
| #define PCICFG_MSI_CAP_ID_OFFSET 0x58 |
| #define PCICFG_MSI_CONTROL_ENABLE (0x1<<16) |
| #define PCICFG_MSI_CONTROL_MCAP (0x7<<17) |
| #define PCICFG_MSI_CONTROL_MENA (0x7<<20) |
| #define PCICFG_MSI_CONTROL_64_BIT_ADDR_CAP (0x1<<23) |
| #define PCICFG_MSI_CONTROL_MSI_PVMASK_CAPABLE (0x1<<24) |
| #define PCICFG_GRC_ADDRESS 0x78 |
| #define PCICFG_GRC_DATA 0x80 |
| #define PCICFG_ME_REGISTER 0x98 |
| #define PCICFG_MSIX_CAP_ID_OFFSET 0xa0 |
| #define PCICFG_MSIX_CONTROL_TABLE_SIZE (0x7ff<<16) |
| #define PCICFG_MSIX_CONTROL_RESERVED (0x7<<27) |
| #define PCICFG_MSIX_CONTROL_FUNC_MASK (0x1<<30) |
| #define PCICFG_MSIX_CONTROL_MSIX_ENABLE (0x1<<31) |
| |
| #define PCICFG_DEVICE_CONTROL 0xb4 |
| #define PCICFG_DEVICE_STATUS 0xb6 |
| #define PCICFG_DEVICE_STATUS_CORR_ERR_DET (1<<0) |
| #define PCICFG_DEVICE_STATUS_NON_FATAL_ERR_DET (1<<1) |
| #define PCICFG_DEVICE_STATUS_FATAL_ERR_DET (1<<2) |
| #define PCICFG_DEVICE_STATUS_UNSUP_REQ_DET (1<<3) |
| #define PCICFG_DEVICE_STATUS_AUX_PWR_DET (1<<4) |
| #define PCICFG_DEVICE_STATUS_NO_PEND (1<<5) |
| #define PCICFG_LINK_CONTROL 0xbc |
| |
| |
| #define BAR_USTRORM_INTMEM 0x400000 |
| #define BAR_CSTRORM_INTMEM 0x410000 |
| #define BAR_XSTRORM_INTMEM 0x420000 |
| #define BAR_TSTRORM_INTMEM 0x430000 |
| |
| /* for accessing the IGU in case of status block ACK */ |
| #define BAR_IGU_INTMEM 0x440000 |
| |
| #define BAR_DOORBELL_OFFSET 0x800000 |
| |
| #define BAR_ME_REGISTER 0x450000 |
| |
| /* config_2 offset */ |
| #define GRC_CONFIG_2_SIZE_REG 0x408 |
| #define PCI_CONFIG_2_BAR1_SIZE (0xfL<<0) |
| #define PCI_CONFIG_2_BAR1_SIZE_DISABLED (0L<<0) |
| #define PCI_CONFIG_2_BAR1_SIZE_64K (1L<<0) |
| #define PCI_CONFIG_2_BAR1_SIZE_128K (2L<<0) |
| #define PCI_CONFIG_2_BAR1_SIZE_256K (3L<<0) |
| #define PCI_CONFIG_2_BAR1_SIZE_512K (4L<<0) |
| #define PCI_CONFIG_2_BAR1_SIZE_1M (5L<<0) |
| #define PCI_CONFIG_2_BAR1_SIZE_2M (6L<<0) |
| #define PCI_CONFIG_2_BAR1_SIZE_4M (7L<<0) |
| #define PCI_CONFIG_2_BAR1_SIZE_8M (8L<<0) |
| #define PCI_CONFIG_2_BAR1_SIZE_16M (9L<<0) |
| #define PCI_CONFIG_2_BAR1_SIZE_32M (10L<<0) |
| #define PCI_CONFIG_2_BAR1_SIZE_64M (11L<<0) |
| #define PCI_CONFIG_2_BAR1_SIZE_128M (12L<<0) |
| #define PCI_CONFIG_2_BAR1_SIZE_256M (13L<<0) |
| #define PCI_CONFIG_2_BAR1_SIZE_512M (14L<<0) |
| #define PCI_CONFIG_2_BAR1_SIZE_1G (15L<<0) |
| #define PCI_CONFIG_2_BAR1_64ENA (1L<<4) |
| #define PCI_CONFIG_2_EXP_ROM_RETRY (1L<<5) |
| #define PCI_CONFIG_2_CFG_CYCLE_RETRY (1L<<6) |
| #define PCI_CONFIG_2_FIRST_CFG_DONE (1L<<7) |
| #define PCI_CONFIG_2_EXP_ROM_SIZE (0xffL<<8) |
| #define PCI_CONFIG_2_EXP_ROM_SIZE_DISABLED (0L<<8) |
| #define PCI_CONFIG_2_EXP_ROM_SIZE_2K (1L<<8) |
| #define PCI_CONFIG_2_EXP_ROM_SIZE_4K (2L<<8) |
| #define PCI_CONFIG_2_EXP_ROM_SIZE_8K (3L<<8) |
| #define PCI_CONFIG_2_EXP_ROM_SIZE_16K (4L<<8) |
| #define PCI_CONFIG_2_EXP_ROM_SIZE_32K (5L<<8) |
| #define PCI_CONFIG_2_EXP_ROM_SIZE_64K (6L<<8) |
| #define PCI_CONFIG_2_EXP_ROM_SIZE_128K (7L<<8) |
| #define PCI_CONFIG_2_EXP_ROM_SIZE_256K (8L<<8) |
| #define PCI_CONFIG_2_EXP_ROM_SIZE_512K (9L<<8) |
| #define PCI_CONFIG_2_EXP_ROM_SIZE_1M (10L<<8) |
| #define PCI_CONFIG_2_EXP_ROM_SIZE_2M (11L<<8) |
| #define PCI_CONFIG_2_EXP_ROM_SIZE_4M (12L<<8) |
| #define PCI_CONFIG_2_EXP_ROM_SIZE_8M (13L<<8) |
| #define PCI_CONFIG_2_EXP_ROM_SIZE_16M (14L<<8) |
| #define PCI_CONFIG_2_EXP_ROM_SIZE_32M (15L<<8) |
| #define PCI_CONFIG_2_BAR_PREFETCH (1L<<16) |
| #define PCI_CONFIG_2_RESERVED0 (0x7fffL<<17) |
| |
| /* config_3 offset */ |
| #define GRC_CONFIG_3_SIZE_REG 0x40c |
| #define PCI_CONFIG_3_STICKY_BYTE (0xffL<<0) |
| #define PCI_CONFIG_3_FORCE_PME (1L<<24) |
| #define PCI_CONFIG_3_PME_STATUS (1L<<25) |
| #define PCI_CONFIG_3_PME_ENABLE (1L<<26) |
| #define PCI_CONFIG_3_PM_STATE (0x3L<<27) |
| #define PCI_CONFIG_3_VAUX_PRESET (1L<<30) |
| #define PCI_CONFIG_3_PCI_POWER (1L<<31) |
| |
| #define GRC_BAR2_CONFIG 0x4e0 |
| #define PCI_CONFIG_2_BAR2_SIZE (0xfL<<0) |
| #define PCI_CONFIG_2_BAR2_SIZE_DISABLED (0L<<0) |
| #define PCI_CONFIG_2_BAR2_SIZE_64K (1L<<0) |
| #define PCI_CONFIG_2_BAR2_SIZE_128K (2L<<0) |
| #define PCI_CONFIG_2_BAR2_SIZE_256K (3L<<0) |
| #define PCI_CONFIG_2_BAR2_SIZE_512K (4L<<0) |
| #define PCI_CONFIG_2_BAR2_SIZE_1M (5L<<0) |
| #define PCI_CONFIG_2_BAR2_SIZE_2M (6L<<0) |
| #define PCI_CONFIG_2_BAR2_SIZE_4M (7L<<0) |
| #define PCI_CONFIG_2_BAR2_SIZE_8M (8L<<0) |
| #define PCI_CONFIG_2_BAR2_SIZE_16M (9L<<0) |
| #define PCI_CONFIG_2_BAR2_SIZE_32M (10L<<0) |
| #define PCI_CONFIG_2_BAR2_SIZE_64M (11L<<0) |
| #define PCI_CONFIG_2_BAR2_SIZE_128M (12L<<0) |
| #define PCI_CONFIG_2_BAR2_SIZE_256M (13L<<0) |
| #define PCI_CONFIG_2_BAR2_SIZE_512M (14L<<0) |
| #define PCI_CONFIG_2_BAR2_SIZE_1G (15L<<0) |
| #define PCI_CONFIG_2_BAR2_64ENA (1L<<4) |
| |
| #define PCI_PM_DATA_A 0x410 |
| #define PCI_PM_DATA_B 0x414 |
| #define PCI_ID_VAL1 0x434 |
| #define PCI_ID_VAL2 0x438 |
| |
| #define PXPCS_TL_CONTROL_5 0x814 |
| #define PXPCS_TL_CONTROL_5_UNKNOWNTYPE_ERR_ATTN (1 << 29) /*WC*/ |
| #define PXPCS_TL_CONTROL_5_BOUNDARY4K_ERR_ATTN (1 << 28) /*WC*/ |
| #define PXPCS_TL_CONTROL_5_MRRS_ERR_ATTN (1 << 27) /*WC*/ |
| #define PXPCS_TL_CONTROL_5_MPS_ERR_ATTN (1 << 26) /*WC*/ |
| #define PXPCS_TL_CONTROL_5_TTX_BRIDGE_FORWARD_ERR (1 << 25) /*WC*/ |
| #define PXPCS_TL_CONTROL_5_TTX_TXINTF_OVERFLOW (1 << 24) /*WC*/ |
| #define PXPCS_TL_CONTROL_5_PHY_ERR_ATTN (1 << 23) /*RO*/ |
| #define PXPCS_TL_CONTROL_5_DL_ERR_ATTN (1 << 22) /*RO*/ |
| #define PXPCS_TL_CONTROL_5_TTX_ERR_NP_TAG_IN_USE (1 << 21) /*WC*/ |
| #define PXPCS_TL_CONTROL_5_TRX_ERR_UNEXP_RTAG (1 << 20) /*WC*/ |
| #define PXPCS_TL_CONTROL_5_PRI_SIG_TARGET_ABORT1 (1 << 19) /*WC*/ |
| #define PXPCS_TL_CONTROL_5_ERR_UNSPPORT1 (1 << 18) /*WC*/ |
| #define PXPCS_TL_CONTROL_5_ERR_ECRC1 (1 << 17) /*WC*/ |
| #define PXPCS_TL_CONTROL_5_ERR_MALF_TLP1 (1 << 16) /*WC*/ |
| #define PXPCS_TL_CONTROL_5_ERR_RX_OFLOW1 (1 << 15) /*WC*/ |
| #define PXPCS_TL_CONTROL_5_ERR_UNEXP_CPL1 (1 << 14) /*WC*/ |
| #define PXPCS_TL_CONTROL_5_ERR_MASTER_ABRT1 (1 << 13) /*WC*/ |
| #define PXPCS_TL_CONTROL_5_ERR_CPL_TIMEOUT1 (1 << 12) /*WC*/ |
| #define PXPCS_TL_CONTROL_5_ERR_FC_PRTL1 (1 << 11) /*WC*/ |
| #define PXPCS_TL_CONTROL_5_ERR_PSND_TLP1 (1 << 10) /*WC*/ |
| #define PXPCS_TL_CONTROL_5_PRI_SIG_TARGET_ABORT (1 << 9) /*WC*/ |
| #define PXPCS_TL_CONTROL_5_ERR_UNSPPORT (1 << 8) /*WC*/ |
| #define PXPCS_TL_CONTROL_5_ERR_ECRC (1 << 7) /*WC*/ |
| #define PXPCS_TL_CONTROL_5_ERR_MALF_TLP (1 << 6) /*WC*/ |
| #define PXPCS_TL_CONTROL_5_ERR_RX_OFLOW (1 << 5) /*WC*/ |
| #define PXPCS_TL_CONTROL_5_ERR_UNEXP_CPL (1 << 4) /*WC*/ |
| #define PXPCS_TL_CONTROL_5_ERR_MASTER_ABRT (1 << 3) /*WC*/ |
| #define PXPCS_TL_CONTROL_5_ERR_CPL_TIMEOUT (1 << 2) /*WC*/ |
| #define PXPCS_TL_CONTROL_5_ERR_FC_PRTL (1 << 1) /*WC*/ |
| #define PXPCS_TL_CONTROL_5_ERR_PSND_TLP (1 << 0) /*WC*/ |
| |
| |
| #define PXPCS_TL_FUNC345_STAT 0x854 |
| #define PXPCS_TL_FUNC345_STAT_PRI_SIG_TARGET_ABORT4 (1 << 29) /* WC */ |
| #define PXPCS_TL_FUNC345_STAT_ERR_UNSPPORT4\ |
| (1 << 28) /* Unsupported Request Error Status in function4, if \ |
| set, generate pcie_err_attn output when this error is seen. WC */ |
| #define PXPCS_TL_FUNC345_STAT_ERR_ECRC4\ |
| (1 << 27) /* ECRC Error TLP Status Status in function 4, if set, \ |
| generate pcie_err_attn output when this error is seen.. WC */ |
| #define PXPCS_TL_FUNC345_STAT_ERR_MALF_TLP4\ |
| (1 << 26) /* Malformed TLP Status Status in function 4, if set, \ |
| generate pcie_err_attn output when this error is seen.. WC */ |
| #define PXPCS_TL_FUNC345_STAT_ERR_RX_OFLOW4\ |
| (1 << 25) /* Receiver Overflow Status Status in function 4, if \ |
| set, generate pcie_err_attn output when this error is seen.. WC \ |
| */ |
| #define PXPCS_TL_FUNC345_STAT_ERR_UNEXP_CPL4\ |
| (1 << 24) /* Unexpected Completion Status Status in function 4, \ |
| if set, generate pcie_err_attn output when this error is seen. WC \ |
| */ |
| #define PXPCS_TL_FUNC345_STAT_ERR_MASTER_ABRT4\ |
| (1 << 23) /* Receive UR Statusin function 4. If set, generate \ |
| pcie_err_attn output when this error is seen. WC */ |
| #define PXPCS_TL_FUNC345_STAT_ERR_CPL_TIMEOUT4\ |
| (1 << 22) /* Completer Timeout Status Status in function 4, if \ |
| set, generate pcie_err_attn output when this error is seen. WC */ |
| #define PXPCS_TL_FUNC345_STAT_ERR_FC_PRTL4\ |
| (1 << 21) /* Flow Control Protocol Error Status Status in \ |
| function 4, if set, generate pcie_err_attn output when this error \ |
| is seen. WC */ |
| #define PXPCS_TL_FUNC345_STAT_ERR_PSND_TLP4\ |
| (1 << 20) /* Poisoned Error Status Status in function 4, if set, \ |
| generate pcie_err_attn output when this error is seen.. WC */ |
| #define PXPCS_TL_FUNC345_STAT_PRI_SIG_TARGET_ABORT3 (1 << 19) /* WC */ |
| #define PXPCS_TL_FUNC345_STAT_ERR_UNSPPORT3\ |
| (1 << 18) /* Unsupported Request Error Status in function3, if \ |
| set, generate pcie_err_attn output when this error is seen. WC */ |
| #define PXPCS_TL_FUNC345_STAT_ERR_ECRC3\ |
| (1 << 17) /* ECRC Error TLP Status Status in function 3, if set, \ |
| generate pcie_err_attn output when this error is seen.. WC */ |
| #define PXPCS_TL_FUNC345_STAT_ERR_MALF_TLP3\ |
| (1 << 16) /* Malformed TLP Status Status in function 3, if set, \ |
| generate pcie_err_attn output when this error is seen.. WC */ |
| #define PXPCS_TL_FUNC345_STAT_ERR_RX_OFLOW3\ |
| (1 << 15) /* Receiver Overflow Status Status in function 3, if \ |
| set, generate pcie_err_attn output when this error is seen.. WC \ |
| */ |
| #define PXPCS_TL_FUNC345_STAT_ERR_UNEXP_CPL3\ |
| (1 << 14) /* Unexpected Completion Status Status in function 3, \ |
| if set, generate pcie_err_attn output when this error is seen. WC \ |
| */ |
| #define PXPCS_TL_FUNC345_STAT_ERR_MASTER_ABRT3\ |
| (1 << 13) /* Receive UR Statusin function 3. If set, generate \ |
| pcie_err_attn output when this error is seen. WC */ |
| #define PXPCS_TL_FUNC345_STAT_ERR_CPL_TIMEOUT3\ |
| (1 << 12) /* Completer Timeout Status Status in function 3, if \ |
| set, generate pcie_err_attn output when this error is seen. WC */ |
| #define PXPCS_TL_FUNC345_STAT_ERR_FC_PRTL3\ |
| (1 << 11) /* Flow Control Protocol Error Status Status in \ |
| function 3, if set, generate pcie_err_attn output when this error \ |
| is seen. WC */ |
| #define PXPCS_TL_FUNC345_STAT_ERR_PSND_TLP3\ |
| (1 << 10) /* Poisoned Error Status Status in function 3, if set, \ |
| generate pcie_err_attn output when this error is seen.. WC */ |
| #define PXPCS_TL_FUNC345_STAT_PRI_SIG_TARGET_ABORT2 (1 << 9) /* WC */ |
| #define PXPCS_TL_FUNC345_STAT_ERR_UNSPPORT2\ |
| (1 << 8) /* Unsupported Request Error Status for Function 2, if \ |
| set, generate pcie_err_attn output when this error is seen. WC */ |
| #define PXPCS_TL_FUNC345_STAT_ERR_ECRC2\ |
| (1 << 7) /* ECRC Error TLP Status Status for Function 2, if set, \ |
| generate pcie_err_attn output when this error is seen.. WC */ |
| #define PXPCS_TL_FUNC345_STAT_ERR_MALF_TLP2\ |
| (1 << 6) /* Malformed TLP Status Status for Function 2, if set, \ |
| generate pcie_err_attn output when this error is seen.. WC */ |
| #define PXPCS_TL_FUNC345_STAT_ERR_RX_OFLOW2\ |
| (1 << 5) /* Receiver Overflow Status Status for Function 2, if \ |
| set, generate pcie_err_attn output when this error is seen.. WC \ |
| */ |
| #define PXPCS_TL_FUNC345_STAT_ERR_UNEXP_CPL2\ |
| (1 << 4) /* Unexpected Completion Status Status for Function 2, \ |
| if set, generate pcie_err_attn output when this error is seen. WC \ |
| */ |
| #define PXPCS_TL_FUNC345_STAT_ERR_MASTER_ABRT2\ |
| (1 << 3) /* Receive UR Statusfor Function 2. If set, generate \ |
| pcie_err_attn output when this error is seen. WC */ |
| #define PXPCS_TL_FUNC345_STAT_ERR_CPL_TIMEOUT2\ |
| (1 << 2) /* Completer Timeout Status Status for Function 2, if \ |
| set, generate pcie_err_attn output when this error is seen. WC */ |
| #define PXPCS_TL_FUNC345_STAT_ERR_FC_PRTL2\ |
| (1 << 1) /* Flow Control Protocol Error Status Status for \ |
| Function 2, if set, generate pcie_err_attn output when this error \ |
| is seen. WC */ |
| #define PXPCS_TL_FUNC345_STAT_ERR_PSND_TLP2\ |
| (1 << 0) /* Poisoned Error Status Status for Function 2, if set, \ |
| generate pcie_err_attn output when this error is seen.. WC */ |
| |
| |
| #define PXPCS_TL_FUNC678_STAT 0x85C |
| #define PXPCS_TL_FUNC678_STAT_PRI_SIG_TARGET_ABORT7 (1 << 29) /* WC */ |
| #define PXPCS_TL_FUNC678_STAT_ERR_UNSPPORT7\ |
| (1 << 28) /* Unsupported Request Error Status in function7, if \ |
| set, generate pcie_err_attn output when this error is seen. WC */ |
| #define PXPCS_TL_FUNC678_STAT_ERR_ECRC7\ |
| (1 << 27) /* ECRC Error TLP Status Status in function 7, if set, \ |
| generate pcie_err_attn output when this error is seen.. WC */ |
| #define PXPCS_TL_FUNC678_STAT_ERR_MALF_TLP7\ |
| (1 << 26) /* Malformed TLP Status Status in function 7, if set, \ |
| generate pcie_err_attn output when this error is seen.. WC */ |
| #define PXPCS_TL_FUNC678_STAT_ERR_RX_OFLOW7\ |
| (1 << 25) /* Receiver Overflow Status Status in function 7, if \ |
| set, generate pcie_err_attn output when this error is seen.. WC \ |
| */ |
| #define PXPCS_TL_FUNC678_STAT_ERR_UNEXP_CPL7\ |
| (1 << 24) /* Unexpected Completion Status Status in function 7, \ |
| if set, generate pcie_err_attn output when this error is seen. WC \ |
| */ |
| #define PXPCS_TL_FUNC678_STAT_ERR_MASTER_ABRT7\ |
| (1 << 23) /* Receive UR Statusin function 7. If set, generate \ |
| pcie_err_attn output when this error is seen. WC */ |
| #define PXPCS_TL_FUNC678_STAT_ERR_CPL_TIMEOUT7\ |
| (1 << 22) /* Completer Timeout Status Status in function 7, if \ |
| set, generate pcie_err_attn output when this error is seen. WC */ |
| #define PXPCS_TL_FUNC678_STAT_ERR_FC_PRTL7\ |
| (1 << 21) /* Flow Control Protocol Error Status Status in \ |
| function 7, if set, generate pcie_err_attn output when this error \ |
| is seen. WC */ |
| #define PXPCS_TL_FUNC678_STAT_ERR_PSND_TLP7\ |
| (1 << 20) /* Poisoned Error Status Status in function 7, if set, \ |
| generate pcie_err_attn output when this error is seen.. WC */ |
| #define PXPCS_TL_FUNC678_STAT_PRI_SIG_TARGET_ABORT6 (1 << 19) /* WC */ |
| #define PXPCS_TL_FUNC678_STAT_ERR_UNSPPORT6\ |
| (1 << 18) /* Unsupported Request Error Status in function6, if \ |
| set, generate pcie_err_attn output when this error is seen. WC */ |
| #define PXPCS_TL_FUNC678_STAT_ERR_ECRC6\ |
| (1 << 17) /* ECRC Error TLP Status Status in function 6, if set, \ |
| generate pcie_err_attn output when this error is seen.. WC */ |
| #define PXPCS_TL_FUNC678_STAT_ERR_MALF_TLP6\ |
| (1 << 16) /* Malformed TLP Status Status in function 6, if set, \ |
| generate pcie_err_attn output when this error is seen.. WC */ |
| #define PXPCS_TL_FUNC678_STAT_ERR_RX_OFLOW6\ |
| (1 << 15) /* Receiver Overflow Status Status in function 6, if \ |
| set, generate pcie_err_attn output when this error is seen.. WC \ |
| */ |
| #define PXPCS_TL_FUNC678_STAT_ERR_UNEXP_CPL6\ |
| (1 << 14) /* Unexpected Completion Status Status in function 6, \ |
| if set, generate pcie_err_attn output when this error is seen. WC \ |
| */ |
| #define PXPCS_TL_FUNC678_STAT_ERR_MASTER_ABRT6\ |
| (1 << 13) /* Receive UR Statusin function 6. If set, generate \ |
| pcie_err_attn output when this error is seen. WC */ |
| #define PXPCS_TL_FUNC678_STAT_ERR_CPL_TIMEOUT6\ |
| (1 << 12) /* Completer Timeout Status Status in function 6, if \ |
| set, generate pcie_err_attn output when this error is seen. WC */ |
| #define PXPCS_TL_FUNC678_STAT_ERR_FC_PRTL6\ |
| (1 << 11) /* Flow Control Protocol Error Status Status in \ |
| function 6, if set, generate pcie_err_attn output when this error \ |
| is seen. WC */ |
| #define PXPCS_TL_FUNC678_STAT_ERR_PSND_TLP6\ |
| (1 << 10) /* Poisoned Error Status Status in function 6, if set, \ |
| generate pcie_err_attn output when this error is seen.. WC */ |
| #define PXPCS_TL_FUNC678_STAT_PRI_SIG_TARGET_ABORT5 (1 << 9) /* WC */ |
| #define PXPCS_TL_FUNC678_STAT_ERR_UNSPPORT5\ |
| (1 << 8) /* Unsupported Request Error Status for Function 5, if \ |
| set, generate pcie_err_attn output when this error is seen. WC */ |
| #define PXPCS_TL_FUNC678_STAT_ERR_ECRC5\ |
| (1 << 7) /* ECRC Error TLP Status Status for Function 5, if set, \ |
| generate pcie_err_attn output when this error is seen.. WC */ |
| #define PXPCS_TL_FUNC678_STAT_ERR_MALF_TLP5\ |
| (1 << 6) /* Malformed TLP Status Status for Function 5, if set, \ |
| generate pcie_err_attn output when this error is seen.. WC */ |
| #define PXPCS_TL_FUNC678_STAT_ERR_RX_OFLOW5\ |
| (1 << 5) /* Receiver Overflow Status Status for Function 5, if \ |
| set, generate pcie_err_attn output when this error is seen.. WC \ |
| */ |
| #define PXPCS_TL_FUNC678_STAT_ERR_UNEXP_CPL5\ |
| (1 << 4) /* Unexpected Completion Status Status for Function 5, \ |
| if set, generate pcie_err_attn output when this error is seen. WC \ |
| */ |
| #define PXPCS_TL_FUNC678_STAT_ERR_MASTER_ABRT5\ |
| (1 << 3) /* Receive UR Statusfor Function 5. If set, generate \ |
| pcie_err_attn output when this error is seen. WC */ |
| #define PXPCS_TL_FUNC678_STAT_ERR_CPL_TIMEOUT5\ |
| (1 << 2) /* Completer Timeout Status Status for Function 5, if \ |
| set, generate pcie_err_attn output when this error is seen. WC */ |
| #define PXPCS_TL_FUNC678_STAT_ERR_FC_PRTL5\ |
| (1 << 1) /* Flow Control Protocol Error Status Status for \ |
| Function 5, if set, generate pcie_err_attn output when this error \ |
| is seen. WC */ |
| #define PXPCS_TL_FUNC678_STAT_ERR_PSND_TLP5\ |
| (1 << 0) /* Poisoned Error Status Status for Function 5, if set, \ |
| generate pcie_err_attn output when this error is seen.. WC */ |
| |
| |
| #define BAR_USTRORM_INTMEM 0x400000 |
| #define BAR_CSTRORM_INTMEM 0x410000 |
| #define BAR_XSTRORM_INTMEM 0x420000 |
| #define BAR_TSTRORM_INTMEM 0x430000 |
| |
| /* for accessing the IGU in case of status block ACK */ |
| #define BAR_IGU_INTMEM 0x440000 |
| |
| #define BAR_DOORBELL_OFFSET 0x800000 |
| |
| #define BAR_ME_REGISTER 0x450000 |
| #define ME_REG_PF_NUM_SHIFT 0 |
| #define ME_REG_PF_NUM\ |
| (7L<<ME_REG_PF_NUM_SHIFT) /* Relative PF Num */ |
| #define ME_REG_VF_VALID (1<<8) |
| #define ME_REG_VF_NUM_SHIFT 9 |
| #define ME_REG_VF_NUM_MASK (0x3f<<ME_REG_VF_NUM_SHIFT) |
| #define ME_REG_VF_ERR (0x1<<3) |
| #define ME_REG_ABS_PF_NUM_SHIFT 16 |
| #define ME_REG_ABS_PF_NUM\ |
| (7L<<ME_REG_ABS_PF_NUM_SHIFT) /* Absolute PF Num */ |
| |
| |
| #define MDIO_REG_BANK_CL73_IEEEB0 0x0 |
| #define MDIO_CL73_IEEEB0_CL73_AN_CONTROL 0x0 |
| #define MDIO_CL73_IEEEB0_CL73_AN_CONTROL_RESTART_AN 0x0200 |
| #define MDIO_CL73_IEEEB0_CL73_AN_CONTROL_AN_EN 0x1000 |
| #define MDIO_CL73_IEEEB0_CL73_AN_CONTROL_MAIN_RST 0x8000 |
| |
| #define MDIO_REG_BANK_CL73_IEEEB1 0x10 |
| #define MDIO_CL73_IEEEB1_AN_ADV1 0x00 |
| #define MDIO_CL73_IEEEB1_AN_ADV1_PAUSE 0x0400 |
| #define MDIO_CL73_IEEEB1_AN_ADV1_ASYMMETRIC 0x0800 |
| #define MDIO_CL73_IEEEB1_AN_ADV1_PAUSE_BOTH 0x0C00 |
| #define MDIO_CL73_IEEEB1_AN_ADV1_PAUSE_MASK 0x0C00 |
| #define MDIO_CL73_IEEEB1_AN_ADV2 0x01 |
| #define MDIO_CL73_IEEEB1_AN_ADV2_ADVR_1000M 0x0000 |
| #define MDIO_CL73_IEEEB1_AN_ADV2_ADVR_1000M_KX 0x0020 |
| #define MDIO_CL73_IEEEB1_AN_ADV2_ADVR_10G_KX4 0x0040 |
| #define MDIO_CL73_IEEEB1_AN_ADV2_ADVR_10G_KR 0x0080 |
| #define MDIO_CL73_IEEEB1_AN_LP_ADV1 0x03 |
| #define MDIO_CL73_IEEEB1_AN_LP_ADV1_PAUSE 0x0400 |
| #define MDIO_CL73_IEEEB1_AN_LP_ADV1_ASYMMETRIC 0x0800 |
| #define MDIO_CL73_IEEEB1_AN_LP_ADV1_PAUSE_BOTH 0x0C00 |
| #define MDIO_CL73_IEEEB1_AN_LP_ADV1_PAUSE_MASK 0x0C00 |
| #define MDIO_CL73_IEEEB1_AN_LP_ADV2 0x04 |
| |
| #define MDIO_REG_BANK_RX0 0x80b0 |
| #define MDIO_RX0_RX_STATUS 0x10 |
| #define MDIO_RX0_RX_STATUS_SIGDET 0x8000 |
| #define MDIO_RX0_RX_STATUS_RX_SEQ_DONE 0x1000 |
| #define MDIO_RX0_RX_EQ_BOOST 0x1c |
| #define MDIO_RX0_RX_EQ_BOOST_EQUALIZER_CTRL_MASK 0x7 |
| #define MDIO_RX0_RX_EQ_BOOST_OFFSET_CTRL 0x10 |
| |
| #define MDIO_REG_BANK_RX1 0x80c0 |
| #define MDIO_RX1_RX_EQ_BOOST 0x1c |
| #define MDIO_RX1_RX_EQ_BOOST_EQUALIZER_CTRL_MASK 0x7 |
| #define MDIO_RX1_RX_EQ_BOOST_OFFSET_CTRL 0x10 |
| |
| #define MDIO_REG_BANK_RX2 0x80d0 |
| #define MDIO_RX2_RX_EQ_BOOST 0x1c |
| #define MDIO_RX2_RX_EQ_BOOST_EQUALIZER_CTRL_MASK 0x7 |
| #define MDIO_RX2_RX_EQ_BOOST_OFFSET_CTRL 0x10 |
| |
| #define MDIO_REG_BANK_RX3 0x80e0 |
| #define MDIO_RX3_RX_EQ_BOOST 0x1c |
| #define MDIO_RX3_RX_EQ_BOOST_EQUALIZER_CTRL_MASK 0x7 |
| #define MDIO_RX3_RX_EQ_BOOST_OFFSET_CTRL 0x10 |
| |
| #define MDIO_REG_BANK_RX_ALL 0x80f0 |
| #define MDIO_RX_ALL_RX_EQ_BOOST 0x1c |
| #define MDIO_RX_ALL_RX_EQ_BOOST_EQUALIZER_CTRL_MASK 0x7 |
| #define MDIO_RX_ALL_RX_EQ_BOOST_OFFSET_CTRL 0x10 |
| |
| #define MDIO_REG_BANK_TX0 0x8060 |
| #define MDIO_TX0_TX_DRIVER 0x17 |
| #define MDIO_TX0_TX_DRIVER_PREEMPHASIS_MASK 0xf000 |
| #define MDIO_TX0_TX_DRIVER_PREEMPHASIS_SHIFT 12 |
| #define MDIO_TX0_TX_DRIVER_IDRIVER_MASK 0x0f00 |
| #define MDIO_TX0_TX_DRIVER_IDRIVER_SHIFT 8 |
| #define MDIO_TX0_TX_DRIVER_IPREDRIVER_MASK 0x00f0 |
| #define MDIO_TX0_TX_DRIVER_IPREDRIVER_SHIFT 4 |
| #define MDIO_TX0_TX_DRIVER_IFULLSPD_MASK 0x000e |
| #define MDIO_TX0_TX_DRIVER_IFULLSPD_SHIFT 1 |
| #define MDIO_TX0_TX_DRIVER_ICBUF1T 1 |
| |
| #define MDIO_REG_BANK_TX1 0x8070 |
| #define MDIO_TX1_TX_DRIVER 0x17 |
| #define MDIO_TX0_TX_DRIVER_PREEMPHASIS_MASK 0xf000 |
| #define MDIO_TX0_TX_DRIVER_PREEMPHASIS_SHIFT 12 |
| #define MDIO_TX0_TX_DRIVER_IDRIVER_MASK 0x0f00 |
| #define MDIO_TX0_TX_DRIVER_IDRIVER_SHIFT 8 |
| #define MDIO_TX0_TX_DRIVER_IPREDRIVER_MASK 0x00f0 |
| #define MDIO_TX0_TX_DRIVER_IPREDRIVER_SHIFT 4 |
| #define MDIO_TX0_TX_DRIVER_IFULLSPD_MASK 0x000e |
| #define MDIO_TX0_TX_DRIVER_IFULLSPD_SHIFT 1 |
| #define MDIO_TX0_TX_DRIVER_ICBUF1T 1 |
| |
| #define MDIO_REG_BANK_TX2 0x8080 |
| #define MDIO_TX2_TX_DRIVER 0x17 |
| #define MDIO_TX0_TX_DRIVER_PREEMPHASIS_MASK 0xf000 |
| #define MDIO_TX0_TX_DRIVER_PREEMPHASIS_SHIFT 12 |
| #define MDIO_TX0_TX_DRIVER_IDRIVER_MASK 0x0f00 |
| #define MDIO_TX0_TX_DRIVER_IDRIVER_SHIFT 8 |
| #define MDIO_TX0_TX_DRIVER_IPREDRIVER_MASK 0x00f0 |
| #define MDIO_TX0_TX_DRIVER_IPREDRIVER_SHIFT 4 |
| #define MDIO_TX0_TX_DRIVER_IFULLSPD_MASK 0x000e |
| #define MDIO_TX0_TX_DRIVER_IFULLSPD_SHIFT 1 |
| #define MDIO_TX0_TX_DRIVER_ICBUF1T 1 |
| |
| #define MDIO_REG_BANK_TX3 0x8090 |
| #define MDIO_TX3_TX_DRIVER 0x17 |
| #define MDIO_TX0_TX_DRIVER_PREEMPHASIS_MASK 0xf000 |
| #define MDIO_TX0_TX_DRIVER_PREEMPHASIS_SHIFT 12 |
| #define MDIO_TX0_TX_DRIVER_IDRIVER_MASK 0x0f00 |
| #define MDIO_TX0_TX_DRIVER_IDRIVER_SHIFT 8 |
| #define MDIO_TX0_TX_DRIVER_IPREDRIVER_MASK 0x00f0 |
| #define MDIO_TX0_TX_DRIVER_IPREDRIVER_SHIFT 4 |
| #define MDIO_TX0_TX_DRIVER_IFULLSPD_MASK 0x000e |
| #define MDIO_TX0_TX_DRIVER_IFULLSPD_SHIFT 1 |
| #define MDIO_TX0_TX_DRIVER_ICBUF1T 1 |
| |
| #define MDIO_REG_BANK_XGXS_BLOCK0 0x8000 |
| #define MDIO_BLOCK0_XGXS_CONTROL 0x10 |
| |
| #define MDIO_REG_BANK_XGXS_BLOCK1 0x8010 |
| #define MDIO_BLOCK1_LANE_CTRL0 0x15 |
| #define MDIO_BLOCK1_LANE_CTRL1 0x16 |
| #define MDIO_BLOCK1_LANE_CTRL2 0x17 |
| #define MDIO_BLOCK1_LANE_PRBS 0x19 |
| |
| #define MDIO_REG_BANK_XGXS_BLOCK2 0x8100 |
| #define MDIO_XGXS_BLOCK2_RX_LN_SWAP 0x10 |
| #define MDIO_XGXS_BLOCK2_RX_LN_SWAP_ENABLE 0x8000 |
| #define MDIO_XGXS_BLOCK2_RX_LN_SWAP_FORCE_ENABLE 0x4000 |
| #define MDIO_XGXS_BLOCK2_TX_LN_SWAP 0x11 |
| #define MDIO_XGXS_BLOCK2_TX_LN_SWAP_ENABLE 0x8000 |
| #define MDIO_XGXS_BLOCK2_UNICORE_MODE_10G 0x14 |
| #define MDIO_XGXS_BLOCK2_UNICORE_MODE_10G_CX4_XGXS 0x0001 |
| #define MDIO_XGXS_BLOCK2_UNICORE_MODE_10G_HIGIG_XGXS 0x0010 |
| #define MDIO_XGXS_BLOCK2_TEST_MODE_LANE 0x15 |
| |
| #define MDIO_REG_BANK_GP_STATUS 0x8120 |
| #define MDIO_GP_STATUS_TOP_AN_STATUS1 0x1B |
| #define MDIO_GP_STATUS_TOP_AN_STATUS1_CL73_AUTONEG_COMPLETE 0x0001 |
| #define MDIO_GP_STATUS_TOP_AN_STATUS1_CL37_AUTONEG_COMPLETE 0x0002 |
| #define MDIO_GP_STATUS_TOP_AN_STATUS1_LINK_STATUS 0x0004 |
| #define MDIO_GP_STATUS_TOP_AN_STATUS1_DUPLEX_STATUS 0x0008 |
| #define MDIO_GP_STATUS_TOP_AN_STATUS1_CL73_MR_LP_NP_AN_ABLE 0x0010 |
| #define MDIO_GP_STATUS_TOP_AN_STATUS1_CL73_LP_NP_BAM_ABLE 0x0020 |
| #define MDIO_GP_STATUS_TOP_AN_STATUS1_PAUSE_RSOLUTION_TXSIDE 0x0040 |
| #define MDIO_GP_STATUS_TOP_AN_STATUS1_PAUSE_RSOLUTION_RXSIDE 0x0080 |
| #define MDIO_GP_STATUS_TOP_AN_STATUS1_ACTUAL_SPEED_MASK 0x3f00 |
| #define MDIO_GP_STATUS_TOP_AN_STATUS1_ACTUAL_SPEED_10M 0x0000 |
| #define MDIO_GP_STATUS_TOP_AN_STATUS1_ACTUAL_SPEED_100M 0x0100 |
| #define MDIO_GP_STATUS_TOP_AN_STATUS1_ACTUAL_SPEED_1G 0x0200 |
| #define MDIO_GP_STATUS_TOP_AN_STATUS1_ACTUAL_SPEED_2_5G 0x0300 |
| #define MDIO_GP_STATUS_TOP_AN_STATUS1_ACTUAL_SPEED_5G 0x0400 |
| #define MDIO_GP_STATUS_TOP_AN_STATUS1_ACTUAL_SPEED_6G 0x0500 |
| #define MDIO_GP_STATUS_TOP_AN_STATUS1_ACTUAL_SPEED_10G_HIG 0x0600 |
| #define MDIO_GP_STATUS_TOP_AN_STATUS1_ACTUAL_SPEED_10G_CX4 0x0700 |
| #define MDIO_GP_STATUS_TOP_AN_STATUS1_ACTUAL_SPEED_12G_HIG 0x0800 |
| #define MDIO_GP_STATUS_TOP_AN_STATUS1_ACTUAL_SPEED_12_5G 0x0900 |
| #define MDIO_GP_STATUS_TOP_AN_STATUS1_ACTUAL_SPEED_13G 0x0A00 |
| #define MDIO_GP_STATUS_TOP_AN_STATUS1_ACTUAL_SPEED_15G 0x0B00 |
| #define MDIO_GP_STATUS_TOP_AN_STATUS1_ACTUAL_SPEED_16G 0x0C00 |
| #define MDIO_GP_STATUS_TOP_AN_STATUS1_ACTUAL_SPEED_1G_KX 0x0D00 |
| #define MDIO_GP_STATUS_TOP_AN_STATUS1_ACTUAL_SPEED_10G_KX4 0x0E00 |
| #define MDIO_GP_STATUS_TOP_AN_STATUS1_ACTUAL_SPEED_10G_KR 0x0F00 |
| #define MDIO_GP_STATUS_TOP_AN_STATUS1_ACTUAL_SPEED_10G_XFI 0x1B00 |
| #define MDIO_GP_STATUS_TOP_AN_STATUS1_ACTUAL_SPEED_20G_DXGXS 0x1E00 |
| #define MDIO_GP_STATUS_TOP_AN_STATUS1_ACTUAL_SPEED_10G_SFI 0x1F00 |
| |
| |
| #define MDIO_REG_BANK_10G_PARALLEL_DETECT 0x8130 |
| #define MDIO_10G_PARALLEL_DETECT_PAR_DET_10G_STATUS 0x10 |
| #define MDIO_10G_PARALLEL_DETECT_PAR_DET_10G_STATUS_PD_LINK 0x8000 |
| #define MDIO_10G_PARALLEL_DETECT_PAR_DET_10G_CONTROL 0x11 |
| #define MDIO_10G_PARALLEL_DETECT_PAR_DET_10G_CONTROL_PARDET10G_EN 0x1 |
| #define MDIO_10G_PARALLEL_DETECT_PAR_DET_10G_LINK 0x13 |
| #define MDIO_10G_PARALLEL_DETECT_PAR_DET_10G_LINK_CNT (0xb71<<1) |
| |
| #define MDIO_REG_BANK_SERDES_DIGITAL 0x8300 |
| #define MDIO_SERDES_DIGITAL_A_1000X_CONTROL1 0x10 |
| #define MDIO_SERDES_DIGITAL_A_1000X_CONTROL1_FIBER_MODE 0x0001 |
| #define MDIO_SERDES_DIGITAL_A_1000X_CONTROL1_TBI_IF 0x0002 |
| #define MDIO_SERDES_DIGITAL_A_1000X_CONTROL1_SIGNAL_DETECT_EN 0x0004 |
| #define MDIO_SERDES_DIGITAL_A_1000X_CONTROL1_INVERT_SIGNAL_DETECT 0x0008 |
| #define MDIO_SERDES_DIGITAL_A_1000X_CONTROL1_AUTODET 0x0010 |
| #define MDIO_SERDES_DIGITAL_A_1000X_CONTROL1_MSTR_MODE 0x0020 |
| #define MDIO_SERDES_DIGITAL_A_1000X_CONTROL2 0x11 |
| #define MDIO_SERDES_DIGITAL_A_1000X_CONTROL2_PRL_DT_EN 0x0001 |
| #define MDIO_SERDES_DIGITAL_A_1000X_CONTROL2_AN_FST_TMR 0x0040 |
| #define MDIO_SERDES_DIGITAL_A_1000X_STATUS1 0x14 |
| #define MDIO_SERDES_DIGITAL_A_1000X_STATUS1_SGMII 0x0001 |
| #define MDIO_SERDES_DIGITAL_A_1000X_STATUS1_LINK 0x0002 |
| #define MDIO_SERDES_DIGITAL_A_1000X_STATUS1_DUPLEX 0x0004 |
| #define MDIO_SERDES_DIGITAL_A_1000X_STATUS1_SPEED_MASK 0x0018 |
| #define MDIO_SERDES_DIGITAL_A_1000X_STATUS1_SPEED_SHIFT 3 |
| #define MDIO_SERDES_DIGITAL_A_1000X_STATUS1_SPEED_2_5G 0x0018 |
| #define MDIO_SERDES_DIGITAL_A_1000X_STATUS1_SPEED_1G 0x0010 |
| #define MDIO_SERDES_DIGITAL_A_1000X_STATUS1_SPEED_100M 0x0008 |
| #define MDIO_SERDES_DIGITAL_A_1000X_STATUS1_SPEED_10M 0x0000 |
| #define MDIO_SERDES_DIGITAL_A_1000X_STATUS2 0x15 |
| #define MDIO_SERDES_DIGITAL_A_1000X_STATUS2_AN_DISABLED 0x0002 |
| #define MDIO_SERDES_DIGITAL_MISC1 0x18 |
| #define MDIO_SERDES_DIGITAL_MISC1_REFCLK_SEL_MASK 0xE000 |
| #define MDIO_SERDES_DIGITAL_MISC1_REFCLK_SEL_25M 0x0000 |
| #define MDIO_SERDES_DIGITAL_MISC1_REFCLK_SEL_100M 0x2000 |
| #define MDIO_SERDES_DIGITAL_MISC1_REFCLK_SEL_125M 0x4000 |
| #define MDIO_SERDES_DIGITAL_MISC1_REFCLK_SEL_156_25M 0x6000 |
| #define MDIO_SERDES_DIGITAL_MISC1_REFCLK_SEL_187_5M 0x8000 |
| #define MDIO_SERDES_DIGITAL_MISC1_FORCE_SPEED_SEL 0x0010 |
| #define MDIO_SERDES_DIGITAL_MISC1_FORCE_SPEED_MASK 0x000f |
| #define MDIO_SERDES_DIGITAL_MISC1_FORCE_SPEED_2_5G 0x0000 |
| #define MDIO_SERDES_DIGITAL_MISC1_FORCE_SPEED_5G 0x0001 |
| #define MDIO_SERDES_DIGITAL_MISC1_FORCE_SPEED_6G 0x0002 |
| #define MDIO_SERDES_DIGITAL_MISC1_FORCE_SPEED_10G_HIG 0x0003 |
| #define MDIO_SERDES_DIGITAL_MISC1_FORCE_SPEED_10G_CX4 0x0004 |
| #define MDIO_SERDES_DIGITAL_MISC1_FORCE_SPEED_12G 0x0005 |
| #define MDIO_SERDES_DIGITAL_MISC1_FORCE_SPEED_12_5G 0x0006 |
| #define MDIO_SERDES_DIGITAL_MISC1_FORCE_SPEED_13G 0x0007 |
| #define MDIO_SERDES_DIGITAL_MISC1_FORCE_SPEED_15G 0x0008 |
| #define MDIO_SERDES_DIGITAL_MISC1_FORCE_SPEED_16G 0x0009 |
| |
| #define MDIO_REG_BANK_OVER_1G 0x8320 |
| #define MDIO_OVER_1G_DIGCTL_3_4 0x14 |
| #define MDIO_OVER_1G_DIGCTL_3_4_MP_ID_MASK 0xffe0 |
| #define MDIO_OVER_1G_DIGCTL_3_4_MP_ID_SHIFT 5 |
| #define MDIO_OVER_1G_UP1 0x19 |
| #define MDIO_OVER_1G_UP1_2_5G 0x0001 |
| #define MDIO_OVER_1G_UP1_5G 0x0002 |
| #define MDIO_OVER_1G_UP1_6G 0x0004 |
| #define MDIO_OVER_1G_UP1_10G 0x0010 |
| #define MDIO_OVER_1G_UP1_10GH 0x0008 |
| #define MDIO_OVER_1G_UP1_12G 0x0020 |
| #define MDIO_OVER_1G_UP1_12_5G 0x0040 |
| #define MDIO_OVER_1G_UP1_13G 0x0080 |
| #define MDIO_OVER_1G_UP1_15G 0x0100 |
| #define MDIO_OVER_1G_UP1_16G 0x0200 |
| #define MDIO_OVER_1G_UP2 0x1A |
| #define MDIO_OVER_1G_UP2_IPREDRIVER_MASK 0x0007 |
| #define MDIO_OVER_1G_UP2_IDRIVER_MASK 0x0038 |
| #define MDIO_OVER_1G_UP2_PREEMPHASIS_MASK 0x03C0 |
| #define MDIO_OVER_1G_UP3 0x1B |
| #define MDIO_OVER_1G_UP3_HIGIG2 0x0001 |
| #define MDIO_OVER_1G_LP_UP1 0x1C |
| #define MDIO_OVER_1G_LP_UP2 0x1D |
| #define MDIO_OVER_1G_LP_UP2_MR_ADV_OVER_1G_MASK 0x03ff |
| #define MDIO_OVER_1G_LP_UP2_PREEMPHASIS_MASK 0x0780 |
| #define MDIO_OVER_1G_LP_UP2_PREEMPHASIS_SHIFT 7 |
| #define MDIO_OVER_1G_LP_UP3 0x1E |
| |
| #define MDIO_REG_BANK_REMOTE_PHY 0x8330 |
| #define MDIO_REMOTE_PHY_MISC_RX_STATUS 0x10 |
| #define MDIO_REMOTE_PHY_MISC_RX_STATUS_CL37_FSM_RECEIVED_OVER1G_MSG 0x0010 |
| #define MDIO_REMOTE_PHY_MISC_RX_STATUS_CL37_FSM_RECEIVED_BRCM_OUI_MSG 0x0600 |
| |
| #define MDIO_REG_BANK_BAM_NEXT_PAGE 0x8350 |
| #define MDIO_BAM_NEXT_PAGE_MP5_NEXT_PAGE_CTRL 0x10 |
| #define MDIO_BAM_NEXT_PAGE_MP5_NEXT_PAGE_CTRL_BAM_MODE 0x0001 |
| #define MDIO_BAM_NEXT_PAGE_MP5_NEXT_PAGE_CTRL_TETON_AN 0x0002 |
| |
| #define MDIO_REG_BANK_CL73_USERB0 0x8370 |
| #define MDIO_CL73_USERB0_CL73_UCTRL 0x10 |
| #define MDIO_CL73_USERB0_CL73_UCTRL_USTAT1_MUXSEL 0x0002 |
| #define MDIO_CL73_USERB0_CL73_USTAT1 0x11 |
| #define MDIO_CL73_USERB0_CL73_USTAT1_LINK_STATUS_CHECK 0x0100 |
| #define MDIO_CL73_USERB0_CL73_USTAT1_AN_GOOD_CHECK_BAM37 0x0400 |
| #define MDIO_CL73_USERB0_CL73_BAM_CTRL1 0x12 |
| #define MDIO_CL73_USERB0_CL73_BAM_CTRL1_BAM_EN 0x8000 |
| #define MDIO_CL73_USERB0_CL73_BAM_CTRL1_BAM_STATION_MNGR_EN 0x4000 |
| #define MDIO_CL73_USERB0_CL73_BAM_CTRL1_BAM_NP_AFTER_BP_EN 0x2000 |
| #define MDIO_CL73_USERB0_CL73_BAM_CTRL3 0x14 |
| #define MDIO_CL73_USERB0_CL73_BAM_CTRL3_USE_CL73_HCD_MR 0x0001 |
| |
| #define MDIO_REG_BANK_AER_BLOCK 0xFFD0 |
| #define MDIO_AER_BLOCK_AER_REG 0x1E |
| |
| #define MDIO_REG_BANK_COMBO_IEEE0 0xFFE0 |
| #define MDIO_COMBO_IEEE0_MII_CONTROL 0x10 |
| #define MDIO_COMBO_IEEO_MII_CONTROL_MAN_SGMII_SP_MASK 0x2040 |
| #define MDIO_COMBO_IEEO_MII_CONTROL_MAN_SGMII_SP_10 0x0000 |
| #define MDIO_COMBO_IEEO_MII_CONTROL_MAN_SGMII_SP_100 0x2000 |
| #define MDIO_COMBO_IEEO_MII_CONTROL_MAN_SGMII_SP_1000 0x0040 |
| #define MDIO_COMBO_IEEO_MII_CONTROL_FULL_DUPLEX 0x0100 |
| #define MDIO_COMBO_IEEO_MII_CONTROL_RESTART_AN 0x0200 |
| #define MDIO_COMBO_IEEO_MII_CONTROL_AN_EN 0x1000 |
| #define MDIO_COMBO_IEEO_MII_CONTROL_LOOPBACK 0x4000 |
| #define MDIO_COMBO_IEEO_MII_CONTROL_RESET 0x8000 |
| #define MDIO_COMBO_IEEE0_MII_STATUS 0x11 |
| #define MDIO_COMBO_IEEE0_MII_STATUS_LINK_PASS 0x0004 |
| #define MDIO_COMBO_IEEE0_MII_STATUS_AUTONEG_COMPLETE 0x0020 |
| #define MDIO_COMBO_IEEE0_AUTO_NEG_ADV 0x14 |
| #define MDIO_COMBO_IEEE0_AUTO_NEG_ADV_FULL_DUPLEX 0x0020 |
| #define MDIO_COMBO_IEEE0_AUTO_NEG_ADV_HALF_DUPLEX 0x0040 |
| #define MDIO_COMBO_IEEE0_AUTO_NEG_ADV_PAUSE_MASK 0x0180 |
| #define MDIO_COMBO_IEEE0_AUTO_NEG_ADV_PAUSE_NONE 0x0000 |
| #define MDIO_COMBO_IEEE0_AUTO_NEG_ADV_PAUSE_SYMMETRIC 0x0080 |
| #define MDIO_COMBO_IEEE0_AUTO_NEG_ADV_PAUSE_ASYMMETRIC 0x0100 |
| #define MDIO_COMBO_IEEE0_AUTO_NEG_ADV_PAUSE_BOTH 0x0180 |
| #define MDIO_COMBO_IEEE0_AUTO_NEG_ADV_NEXT_PAGE 0x8000 |
| #define MDIO_COMBO_IEEE0_AUTO_NEG_LINK_PARTNER_ABILITY1 0x15 |
| #define MDIO_COMBO_IEEE0_AUTO_NEG_LINK_PARTNER_ABILITY1_NEXT_PAGE 0x8000 |
| #define MDIO_COMBO_IEEE0_AUTO_NEG_LINK_PARTNER_ABILITY1_ACK 0x4000 |
| #define MDIO_COMBO_IEEE0_AUTO_NEG_LINK_PARTNER_ABILITY1_PAUSE_MASK 0x0180 |
| #define MDIO_COMBO_IEEE0_AUTO_NEG_LINK_PARTNER_ABILITY1_PAUSE_NONE 0x0000 |
| #define MDIO_COMBO_IEEE0_AUTO_NEG_LINK_PARTNER_ABILITY1_PAUSE_BOTH 0x0180 |
| #define MDIO_COMBO_IEEE0_AUTO_NEG_LINK_PARTNER_ABILITY1_HALF_DUP_CAP 0x0040 |
| #define MDIO_COMBO_IEEE0_AUTO_NEG_LINK_PARTNER_ABILITY1_FULL_DUP_CAP 0x0020 |
| /*WhenthelinkpartnerisinSGMIImode(bit0=1),then |
| bit15=link,bit12=duplex,bits11:10=speed,bit14=acknowledge. |
| Theotherbitsarereservedandshouldbezero*/ |
| #define MDIO_COMBO_IEEE0_AUTO_NEG_LINK_PARTNER_ABILITY1_SGMII_MODE 0x0001 |
| |
| |
| #define MDIO_PMA_DEVAD 0x1 |
| /*ieee*/ |
| #define MDIO_PMA_REG_CTRL 0x0 |
| #define MDIO_PMA_REG_STATUS 0x1 |
| #define MDIO_PMA_REG_10G_CTRL2 0x7 |
| #define MDIO_PMA_REG_TX_DISABLE 0x0009 |
| #define MDIO_PMA_REG_RX_SD 0xa |
| /*bcm*/ |
| #define MDIO_PMA_REG_BCM_CTRL 0x0096 |
| #define MDIO_PMA_REG_FEC_CTRL 0x00ab |
| #define MDIO_PMA_REG_PHY_IDENTIFIER 0xc800 |
| #define MDIO_PMA_REG_DIGITAL_CTRL 0xc808 |
| #define MDIO_PMA_REG_DIGITAL_STATUS 0xc809 |
| #define MDIO_PMA_REG_TX_POWER_DOWN 0xca02 |
| #define MDIO_PMA_REG_CMU_PLL_BYPASS 0xca09 |
| #define MDIO_PMA_REG_MISC_CTRL 0xca0a |
| #define MDIO_PMA_REG_GEN_CTRL 0xca10 |
| #define MDIO_PMA_REG_GEN_CTRL_ROM_RESET_INTERNAL_MP 0x0188 |
| #define MDIO_PMA_REG_GEN_CTRL_ROM_MICRO_RESET 0x018a |
| #define MDIO_PMA_REG_M8051_MSGIN_REG 0xca12 |
| #define MDIO_PMA_REG_M8051_MSGOUT_REG 0xca13 |
| #define MDIO_PMA_REG_ROM_VER1 0xca19 |
| #define MDIO_PMA_REG_ROM_VER2 0xca1a |
| #define MDIO_PMA_REG_EDC_FFE_MAIN 0xca1b |
| #define MDIO_PMA_REG_PLL_BANDWIDTH 0xca1d |
| #define MDIO_PMA_REG_PLL_CTRL 0xca1e |
| #define MDIO_PMA_REG_MISC_CTRL0 0xca23 |
| #define MDIO_PMA_REG_LRM_MODE 0xca3f |
| #define MDIO_PMA_REG_CDR_BANDWIDTH 0xca46 |
| #define MDIO_PMA_REG_MISC_CTRL1 0xca85 |
| |
| #define MDIO_PMA_REG_SFP_TWO_WIRE_CTRL 0x8000 |
| #define MDIO_PMA_REG_SFP_TWO_WIRE_CTRL_STATUS_MASK 0x000c |
| #define MDIO_PMA_REG_SFP_TWO_WIRE_STATUS_IDLE 0x0000 |
| #define MDIO_PMA_REG_SFP_TWO_WIRE_STATUS_COMPLETE 0x0004 |
| #define MDIO_PMA_REG_SFP_TWO_WIRE_STATUS_IN_PROGRESS 0x0008 |
| #define MDIO_PMA_REG_SFP_TWO_WIRE_STATUS_FAILED 0x000c |
| #define MDIO_PMA_REG_SFP_TWO_WIRE_BYTE_CNT 0x8002 |
| #define MDIO_PMA_REG_SFP_TWO_WIRE_MEM_ADDR 0x8003 |
| #define MDIO_PMA_REG_8726_TWO_WIRE_DATA_BUF 0xc820 |
| #define MDIO_PMA_REG_8726_TWO_WIRE_DATA_MASK 0xff |
| #define MDIO_PMA_REG_8726_TX_CTRL1 0xca01 |
| #define MDIO_PMA_REG_8726_TX_CTRL2 0xca05 |
| |
| #define MDIO_PMA_REG_8727_TWO_WIRE_SLAVE_ADDR 0x8005 |
| #define MDIO_PMA_REG_8727_TWO_WIRE_DATA_BUF 0x8007 |
| #define MDIO_PMA_REG_8727_TWO_WIRE_DATA_MASK 0xff |
| #define MDIO_PMA_REG_8727_TX_CTRL1 0xca02 |
| #define MDIO_PMA_REG_8727_TX_CTRL2 0xca05 |
| #define MDIO_PMA_REG_8727_PCS_OPT_CTRL 0xc808 |
| #define MDIO_PMA_REG_8727_GPIO_CTRL 0xc80e |
| #define MDIO_PMA_REG_8727_PCS_GP 0xc842 |
| #define MDIO_PMA_REG_8727_OPT_CFG_REG 0xc8e4 |
| |
| #define MDIO_AN_REG_8727_MISC_CTRL 0x8309 |
| |
| #define MDIO_PMA_REG_8073_CHIP_REV 0xc801 |
| #define MDIO_PMA_REG_8073_SPEED_LINK_STATUS 0xc820 |
| #define MDIO_PMA_REG_8073_XAUI_WA 0xc841 |
| #define MDIO_PMA_REG_8073_OPT_DIGITAL_CTRL 0xcd08 |
| |
| #define MDIO_PMA_REG_7101_RESET 0xc000 |
| #define MDIO_PMA_REG_7107_LED_CNTL 0xc007 |
| #define MDIO_PMA_REG_7107_LINK_LED_CNTL 0xc009 |
| #define MDIO_PMA_REG_7101_VER1 0xc026 |
| #define MDIO_PMA_REG_7101_VER2 0xc027 |
| |
| #define MDIO_PMA_REG_8481_PMD_SIGNAL 0xa811 |
| #define MDIO_PMA_REG_8481_LED1_MASK 0xa82c |
| #define MDIO_PMA_REG_8481_LED2_MASK 0xa82f |
| #define MDIO_PMA_REG_8481_LED3_MASK 0xa832 |
| #define MDIO_PMA_REG_8481_LED3_BLINK 0xa834 |
| #define MDIO_PMA_REG_8481_LED5_MASK 0xa838 |
| #define MDIO_PMA_REG_8481_SIGNAL_MASK 0xa835 |
| #define MDIO_PMA_REG_8481_LINK_SIGNAL 0xa83b |
| #define MDIO_PMA_REG_8481_LINK_SIGNAL_LED4_ENABLE_MASK 0x800 |
| #define MDIO_PMA_REG_8481_LINK_SIGNAL_LED4_ENABLE_SHIFT 11 |
| |
| |
| #define MDIO_WIS_DEVAD 0x2 |
| /*bcm*/ |
| #define MDIO_WIS_REG_LASI_CNTL 0x9002 |
| #define MDIO_WIS_REG_LASI_STATUS 0x9005 |
| |
| #define MDIO_PCS_DEVAD 0x3 |
| #define MDIO_PCS_REG_STATUS 0x0020 |
| #define MDIO_PCS_REG_LASI_STATUS 0x9005 |
| #define MDIO_PCS_REG_7101_DSP_ACCESS 0xD000 |
| #define MDIO_PCS_REG_7101_SPI_MUX 0xD008 |
| #define MDIO_PCS_REG_7101_SPI_CTRL_ADDR 0xE12A |
| #define MDIO_PCS_REG_7101_SPI_RESET_BIT (5) |
| #define MDIO_PCS_REG_7101_SPI_FIFO_ADDR 0xE02A |
| #define MDIO_PCS_REG_7101_SPI_FIFO_ADDR_WRITE_ENABLE_CMD (6) |
| #define MDIO_PCS_REG_7101_SPI_FIFO_ADDR_BULK_ERASE_CMD (0xC7) |
| #define MDIO_PCS_REG_7101_SPI_FIFO_ADDR_PAGE_PROGRAM_CMD (2) |
| #define MDIO_PCS_REG_7101_SPI_BYTES_TO_TRANSFER_ADDR 0xE028 |
| |
| |
| #define MDIO_XS_DEVAD 0x4 |
| #define MDIO_XS_PLL_SEQUENCER 0x8000 |
| #define MDIO_XS_SFX7101_XGXS_TEST1 0xc00a |
| |
| #define MDIO_XS_8706_REG_BANK_RX0 0x80bc |
| #define MDIO_XS_8706_REG_BANK_RX1 0x80cc |
| #define MDIO_XS_8706_REG_BANK_RX2 0x80dc |
| #define MDIO_XS_8706_REG_BANK_RX3 0x80ec |
| #define MDIO_XS_8706_REG_BANK_RXA 0x80fc |
| |
| #define MDIO_XS_REG_8073_RX_CTRL_PCIE 0x80FA |
| |
| #define MDIO_AN_DEVAD 0x7 |
| /*ieee*/ |
| #define MDIO_AN_REG_CTRL 0x0000 |
| #define MDIO_AN_REG_STATUS 0x0001 |
| #define MDIO_AN_REG_STATUS_AN_COMPLETE 0x0020 |
| #define MDIO_AN_REG_ADV_PAUSE 0x0010 |
| #define MDIO_AN_REG_ADV_PAUSE_PAUSE 0x0400 |
| #define MDIO_AN_REG_ADV_PAUSE_ASYMMETRIC 0x0800 |
| #define MDIO_AN_REG_ADV_PAUSE_BOTH 0x0C00 |
| #define MDIO_AN_REG_ADV_PAUSE_MASK 0x0C00 |
| #define MDIO_AN_REG_ADV 0x0011 |
| #define MDIO_AN_REG_ADV2 0x0012 |
| #define MDIO_AN_REG_LP_AUTO_NEG 0x0013 |
| #define MDIO_AN_REG_LP_AUTO_NEG2 0x0014 |
| #define MDIO_AN_REG_MASTER_STATUS 0x0021 |
| #define MDIO_AN_REG_EEE_ADV 0x003c |
| #define MDIO_AN_REG_LP_EEE_ADV 0x003d |
| /*bcm*/ |
| #define MDIO_AN_REG_LINK_STATUS 0x8304 |
| #define MDIO_AN_REG_CL37_CL73 0x8370 |
| #define MDIO_AN_REG_CL37_AN 0xffe0 |
| #define MDIO_AN_REG_CL37_FC_LD 0xffe4 |
| #define MDIO_AN_REG_CL37_FC_LP 0xffe5 |
| #define MDIO_AN_REG_1000T_STATUS 0xffea |
| |
| #define MDIO_AN_REG_8073_2_5G 0x8329 |
| #define MDIO_AN_REG_8073_BAM 0x8350 |
| |
| #define MDIO_AN_REG_8481_10GBASE_T_AN_CTRL 0x0020 |
| #define MDIO_AN_REG_8481_LEGACY_MII_CTRL 0xffe0 |
| #define MDIO_AN_REG_8481_MII_CTRL_FORCE_1G 0x40 |
| #define MDIO_AN_REG_8481_LEGACY_MII_STATUS 0xffe1 |
| #define MDIO_AN_REG_8481_LEGACY_AN_ADV 0xffe4 |
| #define MDIO_AN_REG_8481_LEGACY_AN_EXPANSION 0xffe6 |
| #define MDIO_AN_REG_8481_1000T_CTRL 0xffe9 |
| #define MDIO_AN_REG_8481_1G_100T_EXT_CTRL 0xfff0 |
| #define MIDO_AN_REG_8481_EXT_CTRL_FORCE_LEDS_OFF 0x0008 |
| #define MDIO_AN_REG_8481_EXPANSION_REG_RD_RW 0xfff5 |
| #define MDIO_AN_REG_8481_EXPANSION_REG_ACCESS 0xfff7 |
| #define MDIO_AN_REG_8481_AUX_CTRL 0xfff8 |
| #define MDIO_AN_REG_8481_LEGACY_SHADOW 0xfffc |
| |
| /* BCM84823 only */ |
| #define MDIO_CTL_DEVAD 0x1e |
| #define MDIO_CTL_REG_84823_MEDIA 0x401a |
| #define MDIO_CTL_REG_84823_MEDIA_MAC_MASK 0x0018 |
| /* These pins configure the BCM84823 interface to MAC after reset. */ |
| #define MDIO_CTL_REG_84823_CTRL_MAC_XFI 0x0008 |
| #define MDIO_CTL_REG_84823_MEDIA_MAC_XAUI_M 0x0010 |
| /* These pins configure the BCM84823 interface to Line after reset. */ |
| #define MDIO_CTL_REG_84823_MEDIA_LINE_MASK 0x0060 |
| #define MDIO_CTL_REG_84823_MEDIA_LINE_XAUI_L 0x0020 |
| #define MDIO_CTL_REG_84823_MEDIA_LINE_XFI 0x0040 |
| /* When this pin is active high during reset, 10GBASE-T core is power |
| * down, When it is active low the 10GBASE-T is power up |
| */ |
| #define MDIO_CTL_REG_84823_MEDIA_COPPER_CORE_DOWN 0x0080 |
| #define MDIO_CTL_REG_84823_MEDIA_PRIORITY_MASK 0x0100 |
| #define MDIO_CTL_REG_84823_MEDIA_PRIORITY_COPPER 0x0000 |
| #define MDIO_CTL_REG_84823_MEDIA_PRIORITY_FIBER 0x0100 |
| #define MDIO_CTL_REG_84823_MEDIA_FIBER_1G 0x1000 |
| #define MDIO_CTL_REG_84823_USER_CTRL_REG 0x4005 |
| #define MDIO_CTL_REG_84823_USER_CTRL_CMS 0x0080 |
| #define MDIO_PMA_REG_84823_CTL_SLOW_CLK_CNT_HIGH 0xa82b |
| #define MDIO_PMA_REG_84823_BLINK_RATE_VAL_15P9HZ 0x2f |
| #define MDIO_PMA_REG_84823_CTL_LED_CTL_1 0xa8e3 |
| #define MDIO_PMA_REG_84833_CTL_LED_CTL_1 0xa8ec |
| #define MDIO_PMA_REG_84823_LED3_STRETCH_EN 0x0080 |
| |
| /* BCM84833 only */ |
| #define MDIO_84833_TOP_CFG_FW_REV 0x400f |
| #define MDIO_84833_TOP_CFG_FW_EEE 0x10b1 |
| #define MDIO_84833_TOP_CFG_FW_NO_EEE 0x1f81 |
| #define MDIO_84833_TOP_CFG_XGPHY_STRAP1 0x401a |
| #define MDIO_84833_SUPER_ISOLATE 0x8000 |
| /* These are mailbox register set used by 84833. */ |
| #define MDIO_84833_TOP_CFG_SCRATCH_REG0 0x4005 |
| #define MDIO_84833_TOP_CFG_SCRATCH_REG1 0x4006 |
| #define MDIO_84833_TOP_CFG_SCRATCH_REG2 0x4007 |
| #define MDIO_84833_TOP_CFG_SCRATCH_REG3 0x4008 |
| #define MDIO_84833_TOP_CFG_SCRATCH_REG4 0x4009 |
| #define MDIO_84833_TOP_CFG_SCRATCH_REG26 0x4037 |
| #define MDIO_84833_TOP_CFG_SCRATCH_REG27 0x4038 |
| #define MDIO_84833_TOP_CFG_SCRATCH_REG28 0x4039 |
| #define MDIO_84833_TOP_CFG_SCRATCH_REG29 0x403a |
| #define MDIO_84833_TOP_CFG_SCRATCH_REG30 0x403b |
| #define MDIO_84833_TOP_CFG_SCRATCH_REG31 0x403c |
| #define MDIO_84833_CMD_HDLR_COMMAND MDIO_84833_TOP_CFG_SCRATCH_REG0 |
| #define MDIO_84833_CMD_HDLR_STATUS MDIO_84833_TOP_CFG_SCRATCH_REG26 |
| #define MDIO_84833_CMD_HDLR_DATA1 MDIO_84833_TOP_CFG_SCRATCH_REG27 |
| #define MDIO_84833_CMD_HDLR_DATA2 MDIO_84833_TOP_CFG_SCRATCH_REG28 |
| #define MDIO_84833_CMD_HDLR_DATA3 MDIO_84833_TOP_CFG_SCRATCH_REG29 |
| #define MDIO_84833_CMD_HDLR_DATA4 MDIO_84833_TOP_CFG_SCRATCH_REG30 |
| #define MDIO_84833_CMD_HDLR_DATA5 MDIO_84833_TOP_CFG_SCRATCH_REG31 |
| |
| /* Mailbox command set used by 84833. */ |
| #define PHY84833_CMD_SET_PAIR_SWAP 0x8001 |
| #define PHY84833_CMD_GET_EEE_MODE 0x8008 |
| #define PHY84833_CMD_SET_EEE_MODE 0x8009 |
| /* Mailbox status set used by 84833. */ |
| #define PHY84833_STATUS_CMD_RECEIVED 0x0001 |
| #define PHY84833_STATUS_CMD_IN_PROGRESS 0x0002 |
| #define PHY84833_STATUS_CMD_COMPLETE_PASS 0x0004 |
| #define PHY84833_STATUS_CMD_COMPLETE_ERROR 0x0008 |
| #define PHY84833_STATUS_CMD_OPEN_FOR_CMDS 0x0010 |
| #define PHY84833_STATUS_CMD_SYSTEM_BOOT 0x0020 |
| #define PHY84833_STATUS_CMD_NOT_OPEN_FOR_CMDS 0x0040 |
| #define PHY84833_STATUS_CMD_CLEAR_COMPLETE 0x0080 |
| #define PHY84833_STATUS_CMD_OPEN_OVERRIDE 0xa5a5 |
| |
| |
| /* Warpcore clause 45 addressing */ |
| #define MDIO_WC_DEVAD 0x3 |
| #define MDIO_WC_REG_IEEE0BLK_MIICNTL 0x0 |
| #define MDIO_WC_REG_IEEE0BLK_AUTONEGNP 0x7 |
| #define MDIO_WC_REG_AN_IEEE1BLK_AN_ADVERTISEMENT0 0x10 |
| #define MDIO_WC_REG_AN_IEEE1BLK_AN_ADVERTISEMENT1 0x11 |
| #define MDIO_WC_REG_AN_IEEE1BLK_AN_ADVERTISEMENT2 0x12 |
| #define MDIO_WC_REG_AN_IEEE1BLK_AN_ADV2_FEC_ABILITY 0x4000 |
| #define MDIO_WC_REG_AN_IEEE1BLK_AN_ADV2_FEC_REQ 0x8000 |
| #define MDIO_WC_REG_PMD_IEEE9BLK_TENGBASE_KR_PMD_CONTROL_REGISTER_150 0x96 |
| #define MDIO_WC_REG_XGXSBLK0_XGXSCONTROL 0x8000 |
| #define MDIO_WC_REG_XGXSBLK0_MISCCONTROL1 0x800e |
| #define MDIO_WC_REG_XGXSBLK1_DESKEW 0x8010 |
| #define MDIO_WC_REG_XGXSBLK1_LANECTRL0 0x8015 |
| #define MDIO_WC_REG_XGXSBLK1_LANECTRL1 0x8016 |
| #define MDIO_WC_REG_XGXSBLK1_LANECTRL2 0x8017 |
| #define MDIO_WC_REG_TX0_ANA_CTRL0 0x8061 |
| #define MDIO_WC_REG_TX1_ANA_CTRL0 0x8071 |
| #define MDIO_WC_REG_TX2_ANA_CTRL0 0x8081 |
| #define MDIO_WC_REG_TX3_ANA_CTRL0 0x8091 |
| #define MDIO_WC_REG_TX0_TX_DRIVER 0x8067 |
| #define MDIO_WC_REG_TX0_TX_DRIVER_IPRE_DRIVER_OFFSET 0x04 |
| #define MDIO_WC_REG_TX0_TX_DRIVER_IPRE_DRIVER_MASK 0x00f0 |
| #define MDIO_WC_REG_TX0_TX_DRIVER_IDRIVER_OFFSET 0x08 |
| #define MDIO_WC_REG_TX0_TX_DRIVER_IDRIVER_MASK 0x0f00 |
| #define MDIO_WC_REG_TX0_TX_DRIVER_POST2_COEFF_OFFSET 0x0c |
| #define MDIO_WC_REG_TX0_TX_DRIVER_POST2_COEFF_MASK 0x7000 |
| #define MDIO_WC_REG_TX1_TX_DRIVER 0x8077 |
| #define MDIO_WC_REG_TX2_TX_DRIVER 0x8087 |
| #define MDIO_WC_REG_TX3_TX_DRIVER 0x8097 |
| #define MDIO_WC_REG_RX0_ANARXCONTROL1G 0x80b9 |
| #define MDIO_WC_REG_RX2_ANARXCONTROL1G 0x80d9 |
| #define MDIO_WC_REG_RX0_PCI_CTRL 0x80ba |
| #define MDIO_WC_REG_RX1_PCI_CTRL 0x80ca |
| #define MDIO_WC_REG_RX2_PCI_CTRL 0x80da |
| #define MDIO_WC_REG_RX3_PCI_CTRL 0x80ea |
| #define MDIO_WC_REG_XGXSBLK2_UNICORE_MODE_10G 0x8104 |
| #define MDIO_WC_REG_XGXS_STATUS3 0x8129 |
| #define MDIO_WC_REG_PAR_DET_10G_STATUS 0x8130 |
| #define MDIO_WC_REG_PAR_DET_10G_CTRL 0x8131 |
| #define MDIO_WC_REG_XGXS_X2_CONTROL2 0x8141 |
| #define MDIO_WC_REG_XGXS_RX_LN_SWAP1 0x816B |
| #define MDIO_WC_REG_XGXS_TX_LN_SWAP1 0x8169 |
| #define MDIO_WC_REG_GP2_STATUS_GP_2_0 0x81d0 |
| #define MDIO_WC_REG_GP2_STATUS_GP_2_1 0x81d1 |
| #define MDIO_WC_REG_GP2_STATUS_GP_2_2 0x81d2 |
| #define MDIO_WC_REG_GP2_STATUS_GP_2_3 0x81d3 |
| #define MDIO_WC_REG_GP2_STATUS_GP_2_4 0x81d4 |
| #define MDIO_WC_REG_GP2_STATUS_GP_2_4_CL73_AN_CMPL 0x1000 |
| #define MDIO_WC_REG_GP2_STATUS_GP_2_4_CL37_AN_CMPL 0x0100 |
| #define MDIO_WC_REG_GP2_STATUS_GP_2_4_CL37_LP_AN_CAP 0x0010 |
| #define MDIO_WC_REG_GP2_STATUS_GP_2_4_CL37_AN_CAP 0x1 |
| #define MDIO_WC_REG_UC_INFO_B0_DEAD_TRAP 0x81EE |
| #define MDIO_WC_REG_UC_INFO_B1_VERSION 0x81F0 |
| #define MDIO_WC_REG_UC_INFO_B1_FIRMWARE_MODE 0x81F2 |
| #define MDIO_WC_REG_UC_INFO_B1_FIRMWARE_LANE0_OFFSET 0x0 |
| #define MDIO_WC_REG_UC_INFO_B1_FIRMWARE_MODE_DEFAULT 0x0 |
| #define MDIO_WC_REG_UC_INFO_B1_FIRMWARE_MODE_SFP_OPT_LR 0x1 |
| #define MDIO_WC_REG_UC_INFO_B1_FIRMWARE_MODE_SFP_DAC 0x2 |
| #define MDIO_WC_REG_UC_INFO_B1_FIRMWARE_MODE_SFP_XLAUI 0x3 |
| #define MDIO_WC_REG_UC_INFO_B1_FIRMWARE_MODE_LONG_CH_6G 0x4 |
| #define MDIO_WC_REG_UC_INFO_B1_FIRMWARE_LANE1_OFFSET 0x4 |
| #define MDIO_WC_REG_UC_INFO_B1_FIRMWARE_LANE2_OFFSET 0x8 |
| #define MDIO_WC_REG_UC_INFO_B1_FIRMWARE_LANE3_OFFSET 0xc |
| #define MDIO_WC_REG_UC_INFO_B1_CRC 0x81FE |
| #define MDIO_WC_REG_DSC_SMC 0x8213 |
| #define MDIO_WC_REG_DSC2B0_DSC_MISC_CTRL0 0x821e |
| #define MDIO_WC_REG_TX_FIR_TAP 0x82e2 |
| #define MDIO_WC_REG_TX_FIR_TAP_PRE_TAP_OFFSET 0x00 |
| #define MDIO_WC_REG_TX_FIR_TAP_PRE_TAP_MASK 0x000f |
| #define MDIO_WC_REG_TX_FIR_TAP_MAIN_TAP_OFFSET 0x04 |
| #define MDIO_WC_REG_TX_FIR_TAP_MAIN_TAP_MASK 0x03f0 |
| #define MDIO_WC_REG_TX_FIR_TAP_POST_TAP_OFFSET 0x0a |
| #define MDIO_WC_REG_TX_FIR_TAP_POST_TAP_MASK 0x7c00 |
| #define MDIO_WC_REG_TX_FIR_TAP_ENABLE 0x8000 |
| #define MDIO_WC_REG_CL72_USERB0_CL72_MISC1_CONTROL 0x82e3 |
| #define MDIO_WC_REG_CL72_USERB0_CL72_OS_DEF_CTRL 0x82e6 |
| #define MDIO_WC_REG_CL72_USERB0_CL72_BR_DEF_CTRL 0x82e7 |
| #define MDIO_WC_REG_CL72_USERB0_CL72_2P5_DEF_CTRL 0x82e8 |
| #define MDIO_WC_REG_CL72_USERB0_CL72_MISC4_CONTROL 0x82ec |
| #define MDIO_WC_REG_SERDESDIGITAL_CONTROL1000X1 0x8300 |
| #define MDIO_WC_REG_SERDESDIGITAL_CONTROL1000X2 0x8301 |
| #define MDIO_WC_REG_SERDESDIGITAL_CONTROL1000X3 0x8302 |
| #define MDIO_WC_REG_SERDESDIGITAL_STATUS1000X1 0x8304 |
| #define MDIO_WC_REG_SERDESDIGITAL_MISC1 0x8308 |
| #define MDIO_WC_REG_SERDESDIGITAL_MISC2 0x8309 |
| #define MDIO_WC_REG_DIGITAL3_UP1 0x8329 |
| #define MDIO_WC_REG_DIGITAL3_LP_UP1 0x832c |
| #define MDIO_WC_REG_DIGITAL4_MISC3 0x833c |
| #define MDIO_WC_REG_DIGITAL4_MISC5 0x833e |
| #define MDIO_WC_REG_DIGITAL5_MISC6 0x8345 |
| #define MDIO_WC_REG_DIGITAL5_MISC7 0x8349 |
| #define MDIO_WC_REG_DIGITAL5_ACTUAL_SPEED 0x834e |
| #define MDIO_WC_REG_DIGITAL6_MP5_NEXTPAGECTRL 0x8350 |
| #define MDIO_WC_REG_CL49_USERB0_CTRL 0x8368 |
| #define MDIO_WC_REG_EEE_COMBO_CONTROL0 0x8390 |
| #define MDIO_WC_REG_TX66_CONTROL 0x83b0 |
| #define MDIO_WC_REG_RX66_CONTROL 0x83c0 |
| #define MDIO_WC_REG_RX66_SCW0 0x83c2 |
| #define MDIO_WC_REG_RX66_SCW1 0x83c3 |
| #define MDIO_WC_REG_RX66_SCW2 0x83c4 |
| #define MDIO_WC_REG_RX66_SCW3 0x83c5 |
| #define MDIO_WC_REG_RX66_SCW0_MASK 0x83c6 |
| #define MDIO_WC_REG_RX66_SCW1_MASK 0x83c7 |
| #define MDIO_WC_REG_RX66_SCW2_MASK 0x83c8 |
| #define MDIO_WC_REG_RX66_SCW3_MASK 0x83c9 |
| #define MDIO_WC_REG_FX100_CTRL1 0x8400 |
| #define MDIO_WC_REG_FX100_CTRL3 0x8402 |
| |
| #define MDIO_WC_REG_MICROBLK_CMD 0xffc2 |
| #define MDIO_WC_REG_MICROBLK_DL_STATUS 0xffc5 |
| #define MDIO_WC_REG_MICROBLK_CMD3 0xffcc |
| |
| #define MDIO_WC_REG_AERBLK_AER 0xffde |
| #define MDIO_WC_REG_COMBO_IEEE0_MIICTRL 0xffe0 |
| #define MDIO_WC_REG_COMBO_IEEE0_MIIISTAT 0xffe1 |
| |
| #define MDIO_WC0_XGXS_BLK2_LANE_RESET 0x810A |
| #define MDIO_WC0_XGXS_BLK2_LANE_RESET_RX_BITSHIFT 0 |
| #define MDIO_WC0_XGXS_BLK2_LANE_RESET_TX_BITSHIFT 4 |
| |
| #define MDIO_WC0_XGXS_BLK6_XGXS_X2_CONTROL2 0x8141 |
| |
| #define DIGITAL5_ACTUAL_SPEED_TX_MASK 0x003f |
| |
| /* 54618se */ |
| #define MDIO_REG_GPHY_PHYID_LSB 0x3 |
| #define MDIO_REG_GPHY_ID_54618SE 0x5cd5 |
| #define MDIO_REG_GPHY_CL45_ADDR_REG 0xd |
| #define MDIO_REG_GPHY_CL45_DATA_REG 0xe |
| #define MDIO_REG_GPHY_EEE_RESOLVED 0x803e |
| #define MDIO_REG_GPHY_EXP_ACCESS_GATE 0x15 |
| #define MDIO_REG_GPHY_EXP_ACCESS 0x17 |
| #define MDIO_REG_GPHY_EXP_ACCESS_TOP 0xd00 |
| #define MDIO_REG_GPHY_EXP_TOP_2K_BUF 0x40 |
| #define MDIO_REG_GPHY_AUX_STATUS 0x19 |
| #define MDIO_REG_INTR_STATUS 0x1a |
| #define MDIO_REG_INTR_MASK 0x1b |
| #define MDIO_REG_INTR_MASK_LINK_STATUS (0x1 << 1) |
| #define MDIO_REG_GPHY_SHADOW 0x1c |
| #define MDIO_REG_GPHY_SHADOW_LED_SEL1 (0x0d << 10) |
| #define MDIO_REG_GPHY_SHADOW_LED_SEL2 (0x0e << 10) |
| #define MDIO_REG_GPHY_SHADOW_WR_ENA (0x1 << 15) |
| #define MDIO_REG_GPHY_SHADOW_AUTO_DET_MED (0x1e << 10) |
| #define MDIO_REG_GPHY_SHADOW_INVERT_FIB_SD (0x1 << 8) |
| |
| #define IGU_FUNC_BASE 0x0400 |
| |
| #define IGU_ADDR_MSIX 0x0000 |
| #define IGU_ADDR_INT_ACK 0x0200 |
| #define IGU_ADDR_PROD_UPD 0x0201 |
| #define IGU_ADDR_ATTN_BITS_UPD 0x0202 |
| #define IGU_ADDR_ATTN_BITS_SET 0x0203 |
| #define IGU_ADDR_ATTN_BITS_CLR 0x0204 |
| #define IGU_ADDR_COALESCE_NOW 0x0205 |
| #define IGU_ADDR_SIMD_MASK 0x0206 |
| #define IGU_ADDR_SIMD_NOMASK 0x0207 |
| #define IGU_ADDR_MSI_CTL 0x0210 |
| #define IGU_ADDR_MSI_ADDR_LO 0x0211 |
| #define IGU_ADDR_MSI_ADDR_HI 0x0212 |
| #define IGU_ADDR_MSI_DATA 0x0213 |
| |
| #define IGU_USE_REGISTER_ustorm_type_0_sb_cleanup 0 |
| #define IGU_USE_REGISTER_ustorm_type_1_sb_cleanup 1 |
| #define IGU_USE_REGISTER_cstorm_type_0_sb_cleanup 2 |
| #define IGU_USE_REGISTER_cstorm_type_1_sb_cleanup 3 |
| |
| #define COMMAND_REG_INT_ACK 0x0 |
| #define COMMAND_REG_PROD_UPD 0x4 |
| #define COMMAND_REG_ATTN_BITS_UPD 0x8 |
| #define COMMAND_REG_ATTN_BITS_SET 0xc |
| #define COMMAND_REG_ATTN_BITS_CLR 0x10 |
| #define COMMAND_REG_COALESCE_NOW 0x14 |
| #define COMMAND_REG_SIMD_MASK 0x18 |
| #define COMMAND_REG_SIMD_NOMASK 0x1c |
| |
| |
| #define IGU_MEM_BASE 0x0000 |
| |
| #define IGU_MEM_MSIX_BASE 0x0000 |
| #define IGU_MEM_MSIX_UPPER 0x007f |
| #define IGU_MEM_MSIX_RESERVED_UPPER 0x01ff |
| |
| #define IGU_MEM_PBA_MSIX_BASE 0x0200 |
| #define IGU_MEM_PBA_MSIX_UPPER 0x0200 |
| |
| #define IGU_CMD_BACKWARD_COMP_PROD_UPD 0x0201 |
| #define IGU_MEM_PBA_MSIX_RESERVED_UPPER 0x03ff |
| |
| #define IGU_CMD_INT_ACK_BASE 0x0400 |
| #define IGU_CMD_INT_ACK_UPPER\ |
| (IGU_CMD_INT_ACK_BASE + MAX_SB_PER_PORT * NUM_OF_PORTS_PER_PATH - 1) |
| #define IGU_CMD_INT_ACK_RESERVED_UPPER 0x04ff |
| |
| #define IGU_CMD_E2_PROD_UPD_BASE 0x0500 |
| #define IGU_CMD_E2_PROD_UPD_UPPER\ |
| (IGU_CMD_E2_PROD_UPD_BASE + MAX_SB_PER_PORT * NUM_OF_PORTS_PER_PATH - 1) |
| #define IGU_CMD_E2_PROD_UPD_RESERVED_UPPER 0x059f |
| |
| #define IGU_CMD_ATTN_BIT_UPD_UPPER 0x05a0 |
| #define IGU_CMD_ATTN_BIT_SET_UPPER 0x05a1 |
| #define IGU_CMD_ATTN_BIT_CLR_UPPER 0x05a2 |
| |
| #define IGU_REG_SISR_MDPC_WMASK_UPPER 0x05a3 |
| #define IGU_REG_SISR_MDPC_WMASK_LSB_UPPER 0x05a4 |
| #define IGU_REG_SISR_MDPC_WMASK_MSB_UPPER 0x05a5 |
| #define IGU_REG_SISR_MDPC_WOMASK_UPPER 0x05a6 |
| |
| #define IGU_REG_RESERVED_UPPER 0x05ff |
| /* Fields of IGU PF CONFIGRATION REGISTER */ |
| #define IGU_PF_CONF_FUNC_EN (0x1<<0) /* function enable */ |
| #define IGU_PF_CONF_MSI_MSIX_EN (0x1<<1) /* MSI/MSIX enable */ |
| #define IGU_PF_CONF_INT_LINE_EN (0x1<<2) /* INT enable */ |
| #define IGU_PF_CONF_ATTN_BIT_EN (0x1<<3) /* attention enable */ |
| #define IGU_PF_CONF_SINGLE_ISR_EN (0x1<<4) /* single ISR mode enable */ |
| #define IGU_PF_CONF_SIMD_MODE (0x1<<5) /* simd all ones mode */ |
| |
| /* Fields of IGU VF CONFIGRATION REGISTER */ |
| #define IGU_VF_CONF_FUNC_EN (0x1<<0) /* function enable */ |
| #define IGU_VF_CONF_MSI_MSIX_EN (0x1<<1) /* MSI/MSIX enable */ |
| #define IGU_VF_CONF_PARENT_MASK (0x3<<2) /* Parent PF */ |
| #define IGU_VF_CONF_PARENT_SHIFT 2 /* Parent PF */ |
| #define IGU_VF_CONF_SINGLE_ISR_EN (0x1<<4) /* single ISR mode enable */ |
| |
| |
| #define IGU_BC_DSB_NUM_SEGS 5 |
| #define IGU_BC_NDSB_NUM_SEGS 2 |
| #define IGU_NORM_DSB_NUM_SEGS 2 |
| #define IGU_NORM_NDSB_NUM_SEGS 1 |
| #define IGU_BC_BASE_DSB_PROD 128 |
| #define IGU_NORM_BASE_DSB_PROD 136 |
| |
| /* FID (if VF - [6] = 0; [5:0] = VF number; if PF - [6] = 1; \ |
| [5:2] = 0; [1:0] = PF number) */ |
| #define IGU_FID_ENCODE_IS_PF (0x1<<6) |
| #define IGU_FID_ENCODE_IS_PF_SHIFT 6 |
| #define IGU_FID_VF_NUM_MASK (0x3f) |
| #define IGU_FID_PF_NUM_MASK (0x7) |
| |
| #define IGU_REG_MAPPING_MEMORY_VALID (1<<0) |
| #define IGU_REG_MAPPING_MEMORY_VECTOR_MASK (0x3F<<1) |
| #define IGU_REG_MAPPING_MEMORY_VECTOR_SHIFT 1 |
| #define IGU_REG_MAPPING_MEMORY_FID_MASK (0x7F<<7) |
| #define IGU_REG_MAPPING_MEMORY_FID_SHIFT 7 |
| |
| |
| #define CDU_REGION_NUMBER_XCM_AG 2 |
| #define CDU_REGION_NUMBER_UCM_AG 4 |
| |
| |
| /* String-to-compress [31:8] = CID (all 24 bits) |
| * String-to-compress [7:4] = Region |
| * String-to-compress [3:0] = Type |
| */ |
| #define CDU_VALID_DATA(_cid, _region, _type)\ |
| (((_cid) << 8) | (((_region)&0xf)<<4) | (((_type)&0xf))) |
| #define CDU_CRC8(_cid, _region, _type)\ |
| (calc_crc8(CDU_VALID_DATA(_cid, _region, _type), 0xff)) |
| #define CDU_RSRVD_VALUE_TYPE_A(_cid, _region, _type)\ |
| (0x80 | ((CDU_CRC8(_cid, _region, _type)) & 0x7f)) |
| #define CDU_RSRVD_VALUE_TYPE_B(_crc, _type)\ |
| (0x80 | ((_type)&0xf << 3) | ((CDU_CRC8(_cid, _region, _type)) & 0x7)) |
| #define CDU_RSRVD_INVALIDATE_CONTEXT_VALUE(_val) ((_val) & ~0x80) |
| |
| /****************************************************************************** |
| * Description: |
| * Calculates crc 8 on a word value: polynomial 0-1-2-8 |
| * Code was translated from Verilog. |
| * Return: |
| *****************************************************************************/ |
| static inline u8 calc_crc8(u32 data, u8 crc) |
| { |
| u8 D[32]; |
| u8 NewCRC[8]; |
| u8 C[8]; |
| u8 crc_res; |
| u8 i; |
| |
| /* split the data into 31 bits */ |
| for (i = 0; i < 32; i++) { |
| D[i] = (u8)(data & 1); |
| data = data >> 1; |
| } |
| |
| /* split the crc into 8 bits */ |
| for (i = 0; i < 8; i++) { |
| C[i] = crc & 1; |
| crc = crc >> 1; |
| } |
| |
| NewCRC[0] = D[31] ^ D[30] ^ D[28] ^ D[23] ^ D[21] ^ D[19] ^ D[18] ^ |
| D[16] ^ D[14] ^ D[12] ^ D[8] ^ D[7] ^ D[6] ^ D[0] ^ C[4] ^ |
| C[6] ^ C[7]; |
| NewCRC[1] = D[30] ^ D[29] ^ D[28] ^ D[24] ^ D[23] ^ D[22] ^ D[21] ^ |
| D[20] ^ D[18] ^ D[17] ^ D[16] ^ D[15] ^ D[14] ^ D[13] ^ |
| D[12] ^ D[9] ^ D[6] ^ D[1] ^ D[0] ^ C[0] ^ C[4] ^ C[5] ^ |
| C[6]; |
| NewCRC[2] = D[29] ^ D[28] ^ D[25] ^ D[24] ^ D[22] ^ D[17] ^ D[15] ^ |
| D[13] ^ D[12] ^ D[10] ^ D[8] ^ D[6] ^ D[2] ^ D[1] ^ D[0] ^ |
| C[0] ^ C[1] ^ C[4] ^ C[5]; |
| NewCRC[3] = D[30] ^ D[29] ^ D[26] ^ D[25] ^ D[23] ^ D[18] ^ D[16] ^ |
| D[14] ^ D[13] ^ D[11] ^ D[9] ^ D[7] ^ D[3] ^ D[2] ^ D[1] ^ |
| C[1] ^ C[2] ^ C[5] ^ C[6]; |
| NewCRC[4] = D[31] ^ D[30] ^ D[27] ^ D[26] ^ D[24] ^ D[19] ^ D[17] ^ |
| D[15] ^ D[14] ^ D[12] ^ D[10] ^ D[8] ^ D[4] ^ D[3] ^ D[2] ^ |
| C[0] ^ C[2] ^ C[3] ^ C[6] ^ C[7]; |
| NewCRC[5] = D[31] ^ D[28] ^ D[27] ^ D[25] ^ D[20] ^ D[18] ^ D[16] ^ |
| D[15] ^ D[13] ^ D[11] ^ D[9] ^ D[5] ^ D[4] ^ D[3] ^ C[1] ^ |
| C[3] ^ C[4] ^ C[7]; |
| NewCRC[6] = D[29] ^ D[28] ^ D[26] ^ D[21] ^ D[19] ^ D[17] ^ D[16] ^ |
| D[14] ^ D[12] ^ D[10] ^ D[6] ^ D[5] ^ D[4] ^ C[2] ^ C[4] ^ |
| C[5]; |
| NewCRC[7] = D[30] ^ D[29] ^ D[27] ^ D[22] ^ D[20] ^ D[18] ^ D[17] ^ |
| D[15] ^ D[13] ^ D[11] ^ D[7] ^ D[6] ^ D[5] ^ C[3] ^ C[5] ^ |
| C[6]; |
| |
| crc_res = 0; |
| for (i = 0; i < 8; i++) |
| crc_res |= (NewCRC[i] << i); |
| |
| return crc_res; |
| } |
| |
| |
| #endif /* BNX2X_REG_H */ |