| /* |
| * Copyright (c) 2011 - 2012 Samsung Electronics Co., Ltd. |
| * http://www.samsung.com |
| * |
| * Samsung EXYNOS5 SoC series G-Scaler driver |
| * |
| * This program is free software; you can redistribute it and/or modify |
| * it under the terms of the GNU General Public License as published |
| * by the Free Software Foundation, either version 2 of the License, |
| * or (at your option) any later version. |
| */ |
| |
| #include <linux/module.h> |
| #include <linux/kernel.h> |
| #include <linux/types.h> |
| #include <linux/errno.h> |
| #include <linux/bug.h> |
| #include <linux/interrupt.h> |
| #include <linux/workqueue.h> |
| #include <linux/device.h> |
| #include <linux/platform_device.h> |
| #include <linux/list.h> |
| #include <linux/io.h> |
| #include <linux/slab.h> |
| #include <linux/clk.h> |
| #include <linux/of.h> |
| #include <linux/of_device.h> |
| #include <media/v4l2-ioctl.h> |
| |
| #include "gsc-core.h" |
| |
| static const struct gsc_fmt gsc_formats[] = { |
| { |
| .name = "RGB565", |
| .pixelformat = V4L2_PIX_FMT_RGB565X, |
| .depth = { 16 }, |
| .color = GSC_RGB, |
| .num_planes = 1, |
| .num_comp = 1, |
| }, { |
| .name = "BGRX-8-8-8-8, 32 bpp", |
| .pixelformat = V4L2_PIX_FMT_BGR32, |
| .depth = { 32 }, |
| .color = GSC_RGB, |
| .num_planes = 1, |
| .num_comp = 1, |
| }, { |
| .name = "YUV 4:2:2 packed, YCbYCr", |
| .pixelformat = V4L2_PIX_FMT_YUYV, |
| .depth = { 16 }, |
| .color = GSC_YUV422, |
| .yorder = GSC_LSB_Y, |
| .corder = GSC_CBCR, |
| .num_planes = 1, |
| .num_comp = 1, |
| .mbus_code = MEDIA_BUS_FMT_YUYV8_2X8, |
| }, { |
| .name = "YUV 4:2:2 packed, CbYCrY", |
| .pixelformat = V4L2_PIX_FMT_UYVY, |
| .depth = { 16 }, |
| .color = GSC_YUV422, |
| .yorder = GSC_LSB_C, |
| .corder = GSC_CBCR, |
| .num_planes = 1, |
| .num_comp = 1, |
| .mbus_code = MEDIA_BUS_FMT_UYVY8_2X8, |
| }, { |
| .name = "YUV 4:2:2 packed, CrYCbY", |
| .pixelformat = V4L2_PIX_FMT_VYUY, |
| .depth = { 16 }, |
| .color = GSC_YUV422, |
| .yorder = GSC_LSB_C, |
| .corder = GSC_CRCB, |
| .num_planes = 1, |
| .num_comp = 1, |
| .mbus_code = MEDIA_BUS_FMT_VYUY8_2X8, |
| }, { |
| .name = "YUV 4:2:2 packed, YCrYCb", |
| .pixelformat = V4L2_PIX_FMT_YVYU, |
| .depth = { 16 }, |
| .color = GSC_YUV422, |
| .yorder = GSC_LSB_Y, |
| .corder = GSC_CRCB, |
| .num_planes = 1, |
| .num_comp = 1, |
| .mbus_code = MEDIA_BUS_FMT_YVYU8_2X8, |
| }, { |
| .name = "YUV 4:4:4 planar, YCbYCr", |
| .pixelformat = V4L2_PIX_FMT_YUV32, |
| .depth = { 32 }, |
| .color = GSC_YUV444, |
| .yorder = GSC_LSB_Y, |
| .corder = GSC_CBCR, |
| .num_planes = 1, |
| .num_comp = 1, |
| }, { |
| .name = "YUV 4:2:2 planar, Y/Cb/Cr", |
| .pixelformat = V4L2_PIX_FMT_YUV422P, |
| .depth = { 16 }, |
| .color = GSC_YUV422, |
| .yorder = GSC_LSB_Y, |
| .corder = GSC_CBCR, |
| .num_planes = 1, |
| .num_comp = 3, |
| }, { |
| .name = "YUV 4:2:2 planar, Y/CbCr", |
| .pixelformat = V4L2_PIX_FMT_NV16, |
| .depth = { 16 }, |
| .color = GSC_YUV422, |
| .yorder = GSC_LSB_Y, |
| .corder = GSC_CBCR, |
| .num_planes = 1, |
| .num_comp = 2, |
| }, { |
| .name = "YUV 4:2:2 non-contig, Y/CbCr", |
| .pixelformat = V4L2_PIX_FMT_NV16M, |
| .depth = { 8, 8 }, |
| .color = GSC_YUV422, |
| .yorder = GSC_LSB_Y, |
| .corder = GSC_CBCR, |
| .num_planes = 2, |
| .num_comp = 2, |
| }, { |
| .name = "YUV 4:2:2 planar, Y/CrCb", |
| .pixelformat = V4L2_PIX_FMT_NV61, |
| .depth = { 16 }, |
| .color = GSC_YUV422, |
| .yorder = GSC_LSB_Y, |
| .corder = GSC_CRCB, |
| .num_planes = 1, |
| .num_comp = 2, |
| }, { |
| .name = "YUV 4:2:2 non-contig, Y/CrCb", |
| .pixelformat = V4L2_PIX_FMT_NV61M, |
| .depth = { 8, 8 }, |
| .color = GSC_YUV422, |
| .yorder = GSC_LSB_Y, |
| .corder = GSC_CRCB, |
| .num_planes = 2, |
| .num_comp = 2, |
| }, { |
| .name = "YUV 4:2:0 planar, YCbCr", |
| .pixelformat = V4L2_PIX_FMT_YUV420, |
| .depth = { 12 }, |
| .color = GSC_YUV420, |
| .yorder = GSC_LSB_Y, |
| .corder = GSC_CBCR, |
| .num_planes = 1, |
| .num_comp = 3, |
| }, { |
| .name = "YUV 4:2:0 planar, YCrCb", |
| .pixelformat = V4L2_PIX_FMT_YVU420, |
| .depth = { 12 }, |
| .color = GSC_YUV420, |
| .yorder = GSC_LSB_Y, |
| .corder = GSC_CRCB, |
| .num_planes = 1, |
| .num_comp = 3, |
| |
| }, { |
| .name = "YUV 4:2:0 planar, Y/CbCr", |
| .pixelformat = V4L2_PIX_FMT_NV12, |
| .depth = { 12 }, |
| .color = GSC_YUV420, |
| .yorder = GSC_LSB_Y, |
| .corder = GSC_CBCR, |
| .num_planes = 1, |
| .num_comp = 2, |
| }, { |
| .name = "YUV 4:2:0 planar, Y/CrCb", |
| .pixelformat = V4L2_PIX_FMT_NV21, |
| .depth = { 12 }, |
| .color = GSC_YUV420, |
| .yorder = GSC_LSB_Y, |
| .corder = GSC_CRCB, |
| .num_planes = 1, |
| .num_comp = 2, |
| }, { |
| .name = "YUV 4:2:0 non-contig. 2p, Y/CrCb", |
| .pixelformat = V4L2_PIX_FMT_NV21M, |
| .depth = { 8, 4 }, |
| .color = GSC_YUV420, |
| .yorder = GSC_LSB_Y, |
| .corder = GSC_CRCB, |
| .num_planes = 2, |
| .num_comp = 2, |
| }, { |
| .name = "YUV 4:2:0 non-contig. 2p, Y/CbCr", |
| .pixelformat = V4L2_PIX_FMT_NV12M, |
| .depth = { 8, 4 }, |
| .color = GSC_YUV420, |
| .yorder = GSC_LSB_Y, |
| .corder = GSC_CBCR, |
| .num_planes = 2, |
| .num_comp = 2, |
| }, { |
| .name = "YUV 4:2:0 non-contig. 3p, Y/Cb/Cr", |
| .pixelformat = V4L2_PIX_FMT_YUV420M, |
| .depth = { 8, 2, 2 }, |
| .color = GSC_YUV420, |
| .yorder = GSC_LSB_Y, |
| .corder = GSC_CBCR, |
| .num_planes = 3, |
| .num_comp = 3, |
| }, { |
| .name = "YUV 4:2:0 non-contig. 3p, Y/Cr/Cb", |
| .pixelformat = V4L2_PIX_FMT_YVU420M, |
| .depth = { 8, 2, 2 }, |
| .color = GSC_YUV420, |
| .yorder = GSC_LSB_Y, |
| .corder = GSC_CRCB, |
| .num_planes = 3, |
| .num_comp = 3, |
| }, { |
| .name = "YUV 4:2:0 n.c. 2p, Y/CbCr tiled", |
| .pixelformat = V4L2_PIX_FMT_NV12MT_16X16, |
| .depth = { 8, 4 }, |
| .color = GSC_YUV420, |
| .yorder = GSC_LSB_Y, |
| .corder = GSC_CBCR, |
| .num_planes = 2, |
| .num_comp = 2, |
| } |
| }; |
| |
| const struct gsc_fmt *get_format(int index) |
| { |
| if (index >= ARRAY_SIZE(gsc_formats)) |
| return NULL; |
| |
| return (struct gsc_fmt *)&gsc_formats[index]; |
| } |
| |
| const struct gsc_fmt *find_fmt(u32 *pixelformat, u32 *mbus_code, u32 index) |
| { |
| const struct gsc_fmt *fmt, *def_fmt = NULL; |
| unsigned int i; |
| |
| if (index >= ARRAY_SIZE(gsc_formats)) |
| return NULL; |
| |
| for (i = 0; i < ARRAY_SIZE(gsc_formats); ++i) { |
| fmt = get_format(i); |
| if (pixelformat && fmt->pixelformat == *pixelformat) |
| return fmt; |
| if (mbus_code && fmt->mbus_code == *mbus_code) |
| return fmt; |
| if (index == i) |
| def_fmt = fmt; |
| } |
| return def_fmt; |
| |
| } |
| |
| void gsc_set_frame_size(struct gsc_frame *frame, int width, int height) |
| { |
| frame->f_width = width; |
| frame->f_height = height; |
| frame->crop.width = width; |
| frame->crop.height = height; |
| frame->crop.left = 0; |
| frame->crop.top = 0; |
| } |
| |
| int gsc_cal_prescaler_ratio(struct gsc_variant *var, u32 src, u32 dst, |
| u32 *ratio) |
| { |
| if ((dst > src) || (dst >= src / var->poly_sc_down_max)) { |
| *ratio = 1; |
| return 0; |
| } |
| |
| if ((src / var->poly_sc_down_max / var->pre_sc_down_max) > dst) { |
| pr_err("Exceeded maximum downscaling ratio (1/16))"); |
| return -EINVAL; |
| } |
| |
| *ratio = (dst > (src / 8)) ? 2 : 4; |
| |
| return 0; |
| } |
| |
| void gsc_get_prescaler_shfactor(u32 hratio, u32 vratio, u32 *sh) |
| { |
| if (hratio == 4 && vratio == 4) |
| *sh = 4; |
| else if ((hratio == 4 && vratio == 2) || |
| (hratio == 2 && vratio == 4)) |
| *sh = 3; |
| else if ((hratio == 4 && vratio == 1) || |
| (hratio == 1 && vratio == 4) || |
| (hratio == 2 && vratio == 2)) |
| *sh = 2; |
| else if (hratio == 1 && vratio == 1) |
| *sh = 0; |
| else |
| *sh = 1; |
| } |
| |
| void gsc_check_src_scale_info(struct gsc_variant *var, |
| struct gsc_frame *s_frame, u32 *wratio, |
| u32 tx, u32 ty, u32 *hratio) |
| { |
| int remainder = 0, walign, halign; |
| |
| if (is_yuv420(s_frame->fmt->color)) { |
| walign = GSC_SC_ALIGN_4; |
| halign = GSC_SC_ALIGN_4; |
| } else if (is_yuv422(s_frame->fmt->color)) { |
| walign = GSC_SC_ALIGN_4; |
| halign = GSC_SC_ALIGN_2; |
| } else { |
| walign = GSC_SC_ALIGN_2; |
| halign = GSC_SC_ALIGN_2; |
| } |
| |
| remainder = s_frame->crop.width % (*wratio * walign); |
| if (remainder) { |
| s_frame->crop.width -= remainder; |
| gsc_cal_prescaler_ratio(var, s_frame->crop.width, tx, wratio); |
| pr_info("cropped src width size is recalculated from %d to %d", |
| s_frame->crop.width + remainder, s_frame->crop.width); |
| } |
| |
| remainder = s_frame->crop.height % (*hratio * halign); |
| if (remainder) { |
| s_frame->crop.height -= remainder; |
| gsc_cal_prescaler_ratio(var, s_frame->crop.height, ty, hratio); |
| pr_info("cropped src height size is recalculated from %d to %d", |
| s_frame->crop.height + remainder, s_frame->crop.height); |
| } |
| } |
| |
| int gsc_enum_fmt_mplane(struct v4l2_fmtdesc *f) |
| { |
| const struct gsc_fmt *fmt; |
| |
| fmt = find_fmt(NULL, NULL, f->index); |
| if (!fmt) |
| return -EINVAL; |
| |
| strlcpy(f->description, fmt->name, sizeof(f->description)); |
| f->pixelformat = fmt->pixelformat; |
| |
| return 0; |
| } |
| |
| static int get_plane_info(struct gsc_frame *frm, u32 addr, u32 *index, u32 *ret_addr) |
| { |
| if (frm->addr.y == addr) { |
| *index = 0; |
| *ret_addr = frm->addr.y; |
| } else if (frm->addr.cb == addr) { |
| *index = 1; |
| *ret_addr = frm->addr.cb; |
| } else if (frm->addr.cr == addr) { |
| *index = 2; |
| *ret_addr = frm->addr.cr; |
| } else { |
| pr_err("Plane address is wrong"); |
| return -EINVAL; |
| } |
| return 0; |
| } |
| |
| void gsc_set_prefbuf(struct gsc_dev *gsc, struct gsc_frame *frm) |
| { |
| u32 f_chk_addr, f_chk_len, s_chk_addr, s_chk_len; |
| f_chk_addr = f_chk_len = s_chk_addr = s_chk_len = 0; |
| |
| f_chk_addr = frm->addr.y; |
| f_chk_len = frm->payload[0]; |
| if (frm->fmt->num_planes == 2) { |
| s_chk_addr = frm->addr.cb; |
| s_chk_len = frm->payload[1]; |
| } else if (frm->fmt->num_planes == 3) { |
| u32 low_addr, low_plane, mid_addr, mid_plane; |
| u32 high_addr, high_plane; |
| u32 t_min, t_max; |
| |
| t_min = min3(frm->addr.y, frm->addr.cb, frm->addr.cr); |
| if (get_plane_info(frm, t_min, &low_plane, &low_addr)) |
| return; |
| t_max = max3(frm->addr.y, frm->addr.cb, frm->addr.cr); |
| if (get_plane_info(frm, t_max, &high_plane, &high_addr)) |
| return; |
| |
| mid_plane = 3 - (low_plane + high_plane); |
| if (mid_plane == 0) |
| mid_addr = frm->addr.y; |
| else if (mid_plane == 1) |
| mid_addr = frm->addr.cb; |
| else if (mid_plane == 2) |
| mid_addr = frm->addr.cr; |
| else |
| return; |
| |
| f_chk_addr = low_addr; |
| if (mid_addr + frm->payload[mid_plane] - low_addr > |
| high_addr + frm->payload[high_plane] - mid_addr) { |
| f_chk_len = frm->payload[low_plane]; |
| s_chk_addr = mid_addr; |
| s_chk_len = high_addr + |
| frm->payload[high_plane] - mid_addr; |
| } else { |
| f_chk_len = mid_addr + |
| frm->payload[mid_plane] - low_addr; |
| s_chk_addr = high_addr; |
| s_chk_len = frm->payload[high_plane]; |
| } |
| } |
| pr_debug("f_addr = 0x%08x, f_len = %d, s_addr = 0x%08x, s_len = %d\n", |
| f_chk_addr, f_chk_len, s_chk_addr, s_chk_len); |
| } |
| |
| int gsc_try_fmt_mplane(struct gsc_ctx *ctx, struct v4l2_format *f) |
| { |
| struct gsc_dev *gsc = ctx->gsc_dev; |
| struct gsc_variant *variant = gsc->variant; |
| struct v4l2_pix_format_mplane *pix_mp = &f->fmt.pix_mp; |
| const struct gsc_fmt *fmt; |
| u32 max_w, max_h, mod_x, mod_y; |
| u32 min_w, min_h, tmp_w, tmp_h; |
| int i; |
| |
| pr_debug("user put w: %d, h: %d", pix_mp->width, pix_mp->height); |
| |
| fmt = find_fmt(&pix_mp->pixelformat, NULL, 0); |
| if (!fmt) { |
| pr_err("pixelformat format (0x%X) invalid\n", |
| pix_mp->pixelformat); |
| return -EINVAL; |
| } |
| |
| if (pix_mp->field == V4L2_FIELD_ANY) |
| pix_mp->field = V4L2_FIELD_NONE; |
| else if (pix_mp->field != V4L2_FIELD_NONE) { |
| pr_debug("Not supported field order(%d)\n", pix_mp->field); |
| return -EINVAL; |
| } |
| |
| max_w = variant->pix_max->target_rot_dis_w; |
| max_h = variant->pix_max->target_rot_dis_h; |
| |
| mod_x = ffs(variant->pix_align->org_w) - 1; |
| if (is_yuv420(fmt->color)) |
| mod_y = ffs(variant->pix_align->org_h) - 1; |
| else |
| mod_y = ffs(variant->pix_align->org_h) - 2; |
| |
| if (V4L2_TYPE_IS_OUTPUT(f->type)) { |
| min_w = variant->pix_min->org_w; |
| min_h = variant->pix_min->org_h; |
| } else { |
| min_w = variant->pix_min->target_rot_dis_w; |
| min_h = variant->pix_min->target_rot_dis_h; |
| pix_mp->colorspace = ctx->out_colorspace; |
| } |
| |
| pr_debug("mod_x: %d, mod_y: %d, max_w: %d, max_h = %d", |
| mod_x, mod_y, max_w, max_h); |
| |
| /* To check if image size is modified to adjust parameter against |
| hardware abilities */ |
| tmp_w = pix_mp->width; |
| tmp_h = pix_mp->height; |
| |
| v4l_bound_align_image(&pix_mp->width, min_w, max_w, mod_x, |
| &pix_mp->height, min_h, max_h, mod_y, 0); |
| if (tmp_w != pix_mp->width || tmp_h != pix_mp->height) |
| pr_debug("Image size has been modified from %dx%d to %dx%d\n", |
| tmp_w, tmp_h, pix_mp->width, pix_mp->height); |
| |
| pix_mp->num_planes = fmt->num_planes; |
| |
| if (V4L2_TYPE_IS_OUTPUT(f->type)) |
| ctx->out_colorspace = pix_mp->colorspace; |
| |
| for (i = 0; i < pix_mp->num_planes; ++i) { |
| struct v4l2_plane_pix_format *plane_fmt = &pix_mp->plane_fmt[i]; |
| u32 bpl = plane_fmt->bytesperline; |
| |
| if (fmt->num_comp == 1 && /* Packed */ |
| (bpl == 0 || (bpl * 8 / fmt->depth[i]) < pix_mp->width)) |
| bpl = pix_mp->width * fmt->depth[i] / 8; |
| |
| if (fmt->num_comp > 1 && /* Planar */ |
| (bpl == 0 || bpl < pix_mp->width)) |
| bpl = pix_mp->width; |
| |
| if (i != 0 && fmt->num_comp == 3) |
| bpl /= 2; |
| |
| plane_fmt->bytesperline = bpl; |
| plane_fmt->sizeimage = max(pix_mp->width * pix_mp->height * |
| fmt->depth[i] / 8, |
| plane_fmt->sizeimage); |
| pr_debug("[%d]: bpl: %d, sizeimage: %d", |
| i, bpl, pix_mp->plane_fmt[i].sizeimage); |
| } |
| |
| return 0; |
| } |
| |
| int gsc_g_fmt_mplane(struct gsc_ctx *ctx, struct v4l2_format *f) |
| { |
| struct gsc_frame *frame; |
| struct v4l2_pix_format_mplane *pix_mp; |
| int i; |
| |
| frame = ctx_get_frame(ctx, f->type); |
| if (IS_ERR(frame)) |
| return PTR_ERR(frame); |
| |
| pix_mp = &f->fmt.pix_mp; |
| |
| pix_mp->width = frame->f_width; |
| pix_mp->height = frame->f_height; |
| pix_mp->field = V4L2_FIELD_NONE; |
| pix_mp->pixelformat = frame->fmt->pixelformat; |
| pix_mp->num_planes = frame->fmt->num_planes; |
| pix_mp->colorspace = ctx->out_colorspace; |
| |
| for (i = 0; i < pix_mp->num_planes; ++i) { |
| pix_mp->plane_fmt[i].bytesperline = (frame->f_width * |
| frame->fmt->depth[i]) / 8; |
| pix_mp->plane_fmt[i].sizeimage = |
| pix_mp->plane_fmt[i].bytesperline * frame->f_height; |
| } |
| |
| return 0; |
| } |
| |
| void gsc_check_crop_change(u32 tmp_w, u32 tmp_h, u32 *w, u32 *h) |
| { |
| if (tmp_w != *w || tmp_h != *h) { |
| pr_info("Cropped size has been modified from %dx%d to %dx%d", |
| *w, *h, tmp_w, tmp_h); |
| *w = tmp_w; |
| *h = tmp_h; |
| } |
| } |
| |
| int gsc_g_crop(struct gsc_ctx *ctx, struct v4l2_crop *cr) |
| { |
| struct gsc_frame *frame; |
| |
| frame = ctx_get_frame(ctx, cr->type); |
| if (IS_ERR(frame)) |
| return PTR_ERR(frame); |
| |
| cr->c = frame->crop; |
| |
| return 0; |
| } |
| |
| int gsc_try_crop(struct gsc_ctx *ctx, struct v4l2_crop *cr) |
| { |
| struct gsc_frame *f; |
| struct gsc_dev *gsc = ctx->gsc_dev; |
| struct gsc_variant *variant = gsc->variant; |
| u32 mod_x = 0, mod_y = 0, tmp_w, tmp_h; |
| u32 min_w, min_h, max_w, max_h; |
| |
| if (cr->c.top < 0 || cr->c.left < 0) { |
| pr_err("doesn't support negative values for top & left\n"); |
| return -EINVAL; |
| } |
| pr_debug("user put w: %d, h: %d", cr->c.width, cr->c.height); |
| |
| if (cr->type == V4L2_BUF_TYPE_VIDEO_CAPTURE) |
| f = &ctx->d_frame; |
| else if (cr->type == V4L2_BUF_TYPE_VIDEO_OUTPUT) |
| f = &ctx->s_frame; |
| else |
| return -EINVAL; |
| |
| max_w = f->f_width; |
| max_h = f->f_height; |
| tmp_w = cr->c.width; |
| tmp_h = cr->c.height; |
| |
| if (V4L2_TYPE_IS_OUTPUT(cr->type)) { |
| if ((is_yuv422(f->fmt->color) && f->fmt->num_comp == 1) || |
| is_rgb(f->fmt->color)) |
| min_w = 32; |
| else |
| min_w = 64; |
| if ((is_yuv422(f->fmt->color) && f->fmt->num_comp == 3) || |
| is_yuv420(f->fmt->color)) |
| min_h = 32; |
| else |
| min_h = 16; |
| } else { |
| if (is_yuv420(f->fmt->color) || is_yuv422(f->fmt->color)) |
| mod_x = ffs(variant->pix_align->target_w) - 1; |
| if (is_yuv420(f->fmt->color)) |
| mod_y = ffs(variant->pix_align->target_h) - 1; |
| if (ctx->gsc_ctrls.rotate->val == 90 || |
| ctx->gsc_ctrls.rotate->val == 270) { |
| max_w = f->f_height; |
| max_h = f->f_width; |
| min_w = variant->pix_min->target_rot_en_w; |
| min_h = variant->pix_min->target_rot_en_h; |
| tmp_w = cr->c.height; |
| tmp_h = cr->c.width; |
| } else { |
| min_w = variant->pix_min->target_rot_dis_w; |
| min_h = variant->pix_min->target_rot_dis_h; |
| } |
| } |
| pr_debug("mod_x: %d, mod_y: %d, min_w: %d, min_h = %d", |
| mod_x, mod_y, min_w, min_h); |
| pr_debug("tmp_w : %d, tmp_h : %d", tmp_w, tmp_h); |
| |
| v4l_bound_align_image(&tmp_w, min_w, max_w, mod_x, |
| &tmp_h, min_h, max_h, mod_y, 0); |
| |
| if (!V4L2_TYPE_IS_OUTPUT(cr->type) && |
| (ctx->gsc_ctrls.rotate->val == 90 || |
| ctx->gsc_ctrls.rotate->val == 270)) |
| gsc_check_crop_change(tmp_h, tmp_w, |
| &cr->c.width, &cr->c.height); |
| else |
| gsc_check_crop_change(tmp_w, tmp_h, |
| &cr->c.width, &cr->c.height); |
| |
| |
| /* adjust left/top if cropping rectangle is out of bounds */ |
| /* Need to add code to algin left value with 2's multiple */ |
| if (cr->c.left + tmp_w > max_w) |
| cr->c.left = max_w - tmp_w; |
| if (cr->c.top + tmp_h > max_h) |
| cr->c.top = max_h - tmp_h; |
| |
| if ((is_yuv420(f->fmt->color) || is_yuv422(f->fmt->color)) && |
| cr->c.left & 1) |
| cr->c.left -= 1; |
| |
| pr_debug("Aligned l:%d, t:%d, w:%d, h:%d, f_w: %d, f_h: %d", |
| cr->c.left, cr->c.top, cr->c.width, cr->c.height, max_w, max_h); |
| |
| return 0; |
| } |
| |
| int gsc_check_scaler_ratio(struct gsc_variant *var, int sw, int sh, int dw, |
| int dh, int rot, int out_path) |
| { |
| int tmp_w, tmp_h, sc_down_max; |
| |
| if (out_path == GSC_DMA) |
| sc_down_max = var->sc_down_max; |
| else |
| sc_down_max = var->local_sc_down; |
| |
| if (rot == 90 || rot == 270) { |
| tmp_w = dh; |
| tmp_h = dw; |
| } else { |
| tmp_w = dw; |
| tmp_h = dh; |
| } |
| |
| if ((sw / tmp_w) > sc_down_max || |
| (sh / tmp_h) > sc_down_max || |
| (tmp_w / sw) > var->sc_up_max || |
| (tmp_h / sh) > var->sc_up_max) |
| return -EINVAL; |
| |
| return 0; |
| } |
| |
| int gsc_set_scaler_info(struct gsc_ctx *ctx) |
| { |
| struct gsc_scaler *sc = &ctx->scaler; |
| struct gsc_frame *s_frame = &ctx->s_frame; |
| struct gsc_frame *d_frame = &ctx->d_frame; |
| struct gsc_variant *variant = ctx->gsc_dev->variant; |
| struct device *dev = &ctx->gsc_dev->pdev->dev; |
| int tx, ty; |
| int ret; |
| |
| ret = gsc_check_scaler_ratio(variant, s_frame->crop.width, |
| s_frame->crop.height, d_frame->crop.width, d_frame->crop.height, |
| ctx->gsc_ctrls.rotate->val, ctx->out_path); |
| if (ret) { |
| pr_err("out of scaler range"); |
| return ret; |
| } |
| |
| if (ctx->gsc_ctrls.rotate->val == 90 || |
| ctx->gsc_ctrls.rotate->val == 270) { |
| ty = d_frame->crop.width; |
| tx = d_frame->crop.height; |
| } else { |
| tx = d_frame->crop.width; |
| ty = d_frame->crop.height; |
| } |
| |
| if (tx <= 0 || ty <= 0) { |
| dev_err(dev, "Invalid target size: %dx%d", tx, ty); |
| return -EINVAL; |
| } |
| |
| ret = gsc_cal_prescaler_ratio(variant, s_frame->crop.width, |
| tx, &sc->pre_hratio); |
| if (ret) { |
| pr_err("Horizontal scale ratio is out of range"); |
| return ret; |
| } |
| |
| ret = gsc_cal_prescaler_ratio(variant, s_frame->crop.height, |
| ty, &sc->pre_vratio); |
| if (ret) { |
| pr_err("Vertical scale ratio is out of range"); |
| return ret; |
| } |
| |
| gsc_check_src_scale_info(variant, s_frame, &sc->pre_hratio, |
| tx, ty, &sc->pre_vratio); |
| |
| gsc_get_prescaler_shfactor(sc->pre_hratio, sc->pre_vratio, |
| &sc->pre_shfactor); |
| |
| sc->main_hratio = (s_frame->crop.width << 16) / tx; |
| sc->main_vratio = (s_frame->crop.height << 16) / ty; |
| |
| pr_debug("scaler input/output size : sx = %d, sy = %d, tx = %d, ty = %d", |
| s_frame->crop.width, s_frame->crop.height, tx, ty); |
| pr_debug("scaler ratio info : pre_shfactor : %d, pre_h : %d", |
| sc->pre_shfactor, sc->pre_hratio); |
| pr_debug("pre_v :%d, main_h : %d, main_v : %d", |
| sc->pre_vratio, sc->main_hratio, sc->main_vratio); |
| |
| return 0; |
| } |
| |
| static int __gsc_s_ctrl(struct gsc_ctx *ctx, struct v4l2_ctrl *ctrl) |
| { |
| struct gsc_dev *gsc = ctx->gsc_dev; |
| struct gsc_variant *variant = gsc->variant; |
| unsigned int flags = GSC_DST_FMT | GSC_SRC_FMT; |
| int ret = 0; |
| |
| if (ctrl->flags & V4L2_CTRL_FLAG_INACTIVE) |
| return 0; |
| |
| switch (ctrl->id) { |
| case V4L2_CID_HFLIP: |
| ctx->hflip = ctrl->val; |
| break; |
| |
| case V4L2_CID_VFLIP: |
| ctx->vflip = ctrl->val; |
| break; |
| |
| case V4L2_CID_ROTATE: |
| if ((ctx->state & flags) == flags) { |
| ret = gsc_check_scaler_ratio(variant, |
| ctx->s_frame.crop.width, |
| ctx->s_frame.crop.height, |
| ctx->d_frame.crop.width, |
| ctx->d_frame.crop.height, |
| ctx->gsc_ctrls.rotate->val, |
| ctx->out_path); |
| |
| if (ret) |
| return -EINVAL; |
| } |
| |
| ctx->rotation = ctrl->val; |
| break; |
| |
| case V4L2_CID_ALPHA_COMPONENT: |
| ctx->d_frame.alpha = ctrl->val; |
| break; |
| } |
| |
| ctx->state |= GSC_PARAMS; |
| return 0; |
| } |
| |
| static int gsc_s_ctrl(struct v4l2_ctrl *ctrl) |
| { |
| struct gsc_ctx *ctx = ctrl_to_ctx(ctrl); |
| unsigned long flags; |
| int ret; |
| |
| spin_lock_irqsave(&ctx->gsc_dev->slock, flags); |
| ret = __gsc_s_ctrl(ctx, ctrl); |
| spin_unlock_irqrestore(&ctx->gsc_dev->slock, flags); |
| |
| return ret; |
| } |
| |
| static const struct v4l2_ctrl_ops gsc_ctrl_ops = { |
| .s_ctrl = gsc_s_ctrl, |
| }; |
| |
| int gsc_ctrls_create(struct gsc_ctx *ctx) |
| { |
| if (ctx->ctrls_rdy) { |
| pr_err("Control handler of this context was created already"); |
| return 0; |
| } |
| |
| v4l2_ctrl_handler_init(&ctx->ctrl_handler, GSC_MAX_CTRL_NUM); |
| |
| ctx->gsc_ctrls.rotate = v4l2_ctrl_new_std(&ctx->ctrl_handler, |
| &gsc_ctrl_ops, V4L2_CID_ROTATE, 0, 270, 90, 0); |
| ctx->gsc_ctrls.hflip = v4l2_ctrl_new_std(&ctx->ctrl_handler, |
| &gsc_ctrl_ops, V4L2_CID_HFLIP, 0, 1, 1, 0); |
| ctx->gsc_ctrls.vflip = v4l2_ctrl_new_std(&ctx->ctrl_handler, |
| &gsc_ctrl_ops, V4L2_CID_VFLIP, 0, 1, 1, 0); |
| ctx->gsc_ctrls.global_alpha = v4l2_ctrl_new_std(&ctx->ctrl_handler, |
| &gsc_ctrl_ops, V4L2_CID_ALPHA_COMPONENT, 0, 255, 1, 0); |
| |
| ctx->ctrls_rdy = ctx->ctrl_handler.error == 0; |
| |
| if (ctx->ctrl_handler.error) { |
| int err = ctx->ctrl_handler.error; |
| v4l2_ctrl_handler_free(&ctx->ctrl_handler); |
| pr_err("Failed to create G-Scaler control handlers"); |
| return err; |
| } |
| |
| return 0; |
| } |
| |
| void gsc_ctrls_delete(struct gsc_ctx *ctx) |
| { |
| if (ctx->ctrls_rdy) { |
| v4l2_ctrl_handler_free(&ctx->ctrl_handler); |
| ctx->ctrls_rdy = false; |
| } |
| } |
| |
| /* The color format (num_comp, num_planes) must be already configured. */ |
| int gsc_prepare_addr(struct gsc_ctx *ctx, struct vb2_buffer *vb, |
| struct gsc_frame *frame, struct gsc_addr *addr) |
| { |
| int ret = 0; |
| u32 pix_size; |
| |
| if ((vb == NULL) || (frame == NULL)) |
| return -EINVAL; |
| |
| pix_size = frame->f_width * frame->f_height; |
| |
| pr_debug("num_planes= %d, num_comp= %d, pix_size= %d", |
| frame->fmt->num_planes, frame->fmt->num_comp, pix_size); |
| |
| addr->y = vb2_dma_contig_plane_dma_addr(vb, 0); |
| |
| if (frame->fmt->num_planes == 1) { |
| switch (frame->fmt->num_comp) { |
| case 1: |
| addr->cb = 0; |
| addr->cr = 0; |
| break; |
| case 2: |
| /* decompose Y into Y/Cb */ |
| addr->cb = (dma_addr_t)(addr->y + pix_size); |
| addr->cr = 0; |
| break; |
| case 3: |
| /* decompose Y into Y/Cb/Cr */ |
| addr->cb = (dma_addr_t)(addr->y + pix_size); |
| if (GSC_YUV420 == frame->fmt->color) |
| addr->cr = (dma_addr_t)(addr->cb |
| + (pix_size >> 2)); |
| else /* 422 */ |
| addr->cr = (dma_addr_t)(addr->cb |
| + (pix_size >> 1)); |
| break; |
| default: |
| pr_err("Invalid the number of color planes"); |
| return -EINVAL; |
| } |
| } else { |
| if (frame->fmt->num_planes >= 2) |
| addr->cb = vb2_dma_contig_plane_dma_addr(vb, 1); |
| |
| if (frame->fmt->num_planes == 3) |
| addr->cr = vb2_dma_contig_plane_dma_addr(vb, 2); |
| } |
| |
| if ((frame->fmt->pixelformat == V4L2_PIX_FMT_VYUY) || |
| (frame->fmt->pixelformat == V4L2_PIX_FMT_YVYU) || |
| (frame->fmt->pixelformat == V4L2_PIX_FMT_YVU420) || |
| (frame->fmt->pixelformat == V4L2_PIX_FMT_YVU420M)) |
| swap(addr->cb, addr->cr); |
| |
| pr_debug("ADDR: y= %pad cb= %pad cr= %pad ret= %d", |
| &addr->y, &addr->cb, &addr->cr, ret); |
| |
| return ret; |
| } |
| |
| static irqreturn_t gsc_irq_handler(int irq, void *priv) |
| { |
| struct gsc_dev *gsc = priv; |
| struct gsc_ctx *ctx; |
| int gsc_irq; |
| |
| gsc_irq = gsc_hw_get_irq_status(gsc); |
| gsc_hw_clear_irq(gsc, gsc_irq); |
| |
| if (gsc_irq == GSC_IRQ_OVERRUN) { |
| pr_err("Local path input over-run interrupt has occurred!\n"); |
| return IRQ_HANDLED; |
| } |
| |
| spin_lock(&gsc->slock); |
| |
| if (test_and_clear_bit(ST_M2M_PEND, &gsc->state)) { |
| |
| gsc_hw_enable_control(gsc, false); |
| |
| if (test_and_clear_bit(ST_M2M_SUSPENDING, &gsc->state)) { |
| set_bit(ST_M2M_SUSPENDED, &gsc->state); |
| wake_up(&gsc->irq_queue); |
| goto isr_unlock; |
| } |
| ctx = v4l2_m2m_get_curr_priv(gsc->m2m.m2m_dev); |
| |
| if (!ctx || !ctx->m2m_ctx) |
| goto isr_unlock; |
| |
| spin_unlock(&gsc->slock); |
| gsc_m2m_job_finish(ctx, VB2_BUF_STATE_DONE); |
| |
| /* wake_up job_abort, stop_streaming */ |
| if (ctx->state & GSC_CTX_STOP_REQ) { |
| ctx->state &= ~GSC_CTX_STOP_REQ; |
| wake_up(&gsc->irq_queue); |
| } |
| return IRQ_HANDLED; |
| } |
| |
| isr_unlock: |
| spin_unlock(&gsc->slock); |
| return IRQ_HANDLED; |
| } |
| |
| static struct gsc_pix_max gsc_v_100_max = { |
| .org_scaler_bypass_w = 8192, |
| .org_scaler_bypass_h = 8192, |
| .org_scaler_input_w = 4800, |
| .org_scaler_input_h = 3344, |
| .real_rot_dis_w = 4800, |
| .real_rot_dis_h = 3344, |
| .real_rot_en_w = 2047, |
| .real_rot_en_h = 2047, |
| .target_rot_dis_w = 4800, |
| .target_rot_dis_h = 3344, |
| .target_rot_en_w = 2016, |
| .target_rot_en_h = 2016, |
| }; |
| |
| static struct gsc_pix_max gsc_v_5250_max = { |
| .org_scaler_bypass_w = 8192, |
| .org_scaler_bypass_h = 8192, |
| .org_scaler_input_w = 4800, |
| .org_scaler_input_h = 3344, |
| .real_rot_dis_w = 4800, |
| .real_rot_dis_h = 3344, |
| .real_rot_en_w = 2016, |
| .real_rot_en_h = 2016, |
| .target_rot_dis_w = 4800, |
| .target_rot_dis_h = 3344, |
| .target_rot_en_w = 2016, |
| .target_rot_en_h = 2016, |
| }; |
| |
| static struct gsc_pix_max gsc_v_5420_max = { |
| .org_scaler_bypass_w = 8192, |
| .org_scaler_bypass_h = 8192, |
| .org_scaler_input_w = 4800, |
| .org_scaler_input_h = 3344, |
| .real_rot_dis_w = 4800, |
| .real_rot_dis_h = 3344, |
| .real_rot_en_w = 2048, |
| .real_rot_en_h = 2048, |
| .target_rot_dis_w = 4800, |
| .target_rot_dis_h = 3344, |
| .target_rot_en_w = 2016, |
| .target_rot_en_h = 2016, |
| }; |
| |
| static struct gsc_pix_max gsc_v_5433_max = { |
| .org_scaler_bypass_w = 8192, |
| .org_scaler_bypass_h = 8192, |
| .org_scaler_input_w = 4800, |
| .org_scaler_input_h = 3344, |
| .real_rot_dis_w = 4800, |
| .real_rot_dis_h = 3344, |
| .real_rot_en_w = 2047, |
| .real_rot_en_h = 2047, |
| .target_rot_dis_w = 4800, |
| .target_rot_dis_h = 3344, |
| .target_rot_en_w = 2016, |
| .target_rot_en_h = 2016, |
| }; |
| |
| static struct gsc_pix_min gsc_v_100_min = { |
| .org_w = 64, |
| .org_h = 32, |
| .real_w = 64, |
| .real_h = 32, |
| .target_rot_dis_w = 64, |
| .target_rot_dis_h = 32, |
| .target_rot_en_w = 32, |
| .target_rot_en_h = 16, |
| }; |
| |
| static struct gsc_pix_align gsc_v_100_align = { |
| .org_h = 16, |
| .org_w = 16, /* yuv420 : 16, others : 8 */ |
| .offset_h = 2, /* yuv420/422 : 2, others : 1 */ |
| .real_w = 16, /* yuv420/422 : 4~16, others : 2~8 */ |
| .real_h = 16, /* yuv420 : 4~16, others : 1 */ |
| .target_w = 2, /* yuv420/422 : 2, others : 1 */ |
| .target_h = 2, /* yuv420 : 2, others : 1 */ |
| }; |
| |
| static struct gsc_variant gsc_v_100_variant = { |
| .pix_max = &gsc_v_100_max, |
| .pix_min = &gsc_v_100_min, |
| .pix_align = &gsc_v_100_align, |
| .in_buf_cnt = 32, |
| .out_buf_cnt = 32, |
| .sc_up_max = 8, |
| .sc_down_max = 16, |
| .poly_sc_down_max = 4, |
| .pre_sc_down_max = 4, |
| .local_sc_down = 2, |
| }; |
| |
| static struct gsc_variant gsc_v_5250_variant = { |
| .pix_max = &gsc_v_5250_max, |
| .pix_min = &gsc_v_100_min, |
| .pix_align = &gsc_v_100_align, |
| .in_buf_cnt = 32, |
| .out_buf_cnt = 32, |
| .sc_up_max = 8, |
| .sc_down_max = 16, |
| .poly_sc_down_max = 4, |
| .pre_sc_down_max = 4, |
| .local_sc_down = 2, |
| }; |
| |
| static struct gsc_variant gsc_v_5420_variant = { |
| .pix_max = &gsc_v_5420_max, |
| .pix_min = &gsc_v_100_min, |
| .pix_align = &gsc_v_100_align, |
| .in_buf_cnt = 32, |
| .out_buf_cnt = 32, |
| .sc_up_max = 8, |
| .sc_down_max = 16, |
| .poly_sc_down_max = 4, |
| .pre_sc_down_max = 4, |
| .local_sc_down = 2, |
| }; |
| |
| static struct gsc_variant gsc_v_5433_variant = { |
| .pix_max = &gsc_v_5433_max, |
| .pix_min = &gsc_v_100_min, |
| .pix_align = &gsc_v_100_align, |
| .in_buf_cnt = 32, |
| .out_buf_cnt = 32, |
| .sc_up_max = 8, |
| .sc_down_max = 16, |
| .poly_sc_down_max = 4, |
| .pre_sc_down_max = 4, |
| .local_sc_down = 2, |
| }; |
| |
| static struct gsc_driverdata gsc_v_100_drvdata = { |
| .variant = { |
| [0] = &gsc_v_100_variant, |
| [1] = &gsc_v_100_variant, |
| [2] = &gsc_v_100_variant, |
| [3] = &gsc_v_100_variant, |
| }, |
| .num_entities = 4, |
| .clk_names = { "gscl" }, |
| .num_clocks = 1, |
| }; |
| |
| static struct gsc_driverdata gsc_v_5250_drvdata = { |
| .variant = { |
| [0] = &gsc_v_5250_variant, |
| [1] = &gsc_v_5250_variant, |
| [2] = &gsc_v_5250_variant, |
| [3] = &gsc_v_5250_variant, |
| }, |
| .num_entities = 4, |
| .clk_names = { "gscl" }, |
| .num_clocks = 1, |
| }; |
| |
| static struct gsc_driverdata gsc_v_5420_drvdata = { |
| .variant = { |
| [0] = &gsc_v_5420_variant, |
| [1] = &gsc_v_5420_variant, |
| }, |
| .num_entities = 2, |
| .clk_names = { "gscl" }, |
| .num_clocks = 1, |
| }; |
| |
| static struct gsc_driverdata gsc_5433_drvdata = { |
| .variant = { |
| [0] = &gsc_v_5433_variant, |
| [1] = &gsc_v_5433_variant, |
| [2] = &gsc_v_5433_variant, |
| }, |
| .num_entities = 3, |
| .clk_names = { "pclk", "aclk", "aclk_xiu", "aclk_gsclbend" }, |
| .num_clocks = 4, |
| }; |
| |
| static const struct of_device_id exynos_gsc_match[] = { |
| { |
| .compatible = "samsung,exynos5250-gsc", |
| .data = &gsc_v_5250_drvdata, |
| }, |
| { |
| .compatible = "samsung,exynos5420-gsc", |
| .data = &gsc_v_5420_drvdata, |
| }, |
| { |
| .compatible = "samsung,exynos5433-gsc", |
| .data = &gsc_5433_drvdata, |
| }, |
| { |
| .compatible = "samsung,exynos5-gsc", |
| .data = &gsc_v_100_drvdata, |
| }, |
| {}, |
| }; |
| MODULE_DEVICE_TABLE(of, exynos_gsc_match); |
| |
| static int gsc_probe(struct platform_device *pdev) |
| { |
| struct gsc_dev *gsc; |
| struct resource *res; |
| struct device *dev = &pdev->dev; |
| const struct gsc_driverdata *drv_data = of_device_get_match_data(dev); |
| int ret; |
| int i; |
| |
| gsc = devm_kzalloc(dev, sizeof(struct gsc_dev), GFP_KERNEL); |
| if (!gsc) |
| return -ENOMEM; |
| |
| ret = of_alias_get_id(pdev->dev.of_node, "gsc"); |
| if (ret < 0) |
| return ret; |
| |
| if (drv_data == &gsc_v_100_drvdata) |
| dev_info(dev, "compatible 'exynos5-gsc' is deprecated\n"); |
| |
| gsc->id = ret; |
| if (gsc->id >= drv_data->num_entities) { |
| dev_err(dev, "Invalid platform device id: %d\n", gsc->id); |
| return -EINVAL; |
| } |
| |
| gsc->num_clocks = drv_data->num_clocks; |
| gsc->variant = drv_data->variant[gsc->id]; |
| gsc->pdev = pdev; |
| |
| init_waitqueue_head(&gsc->irq_queue); |
| spin_lock_init(&gsc->slock); |
| mutex_init(&gsc->lock); |
| |
| res = platform_get_resource(pdev, IORESOURCE_MEM, 0); |
| gsc->regs = devm_ioremap_resource(dev, res); |
| if (IS_ERR(gsc->regs)) |
| return PTR_ERR(gsc->regs); |
| |
| res = platform_get_resource(pdev, IORESOURCE_IRQ, 0); |
| if (!res) { |
| dev_err(dev, "failed to get IRQ resource\n"); |
| return -ENXIO; |
| } |
| |
| for (i = 0; i < gsc->num_clocks; i++) { |
| gsc->clock[i] = devm_clk_get(dev, drv_data->clk_names[i]); |
| if (IS_ERR(gsc->clock[i])) { |
| dev_err(dev, "failed to get clock: %s\n", |
| drv_data->clk_names[i]); |
| return PTR_ERR(gsc->clock[i]); |
| } |
| } |
| |
| for (i = 0; i < gsc->num_clocks; i++) { |
| ret = clk_prepare_enable(gsc->clock[i]); |
| if (ret) { |
| dev_err(dev, "clock prepare failed for clock: %s\n", |
| drv_data->clk_names[i]); |
| while (--i >= 0) |
| clk_disable_unprepare(gsc->clock[i]); |
| return ret; |
| } |
| } |
| |
| ret = devm_request_irq(dev, res->start, gsc_irq_handler, |
| 0, pdev->name, gsc); |
| if (ret) { |
| dev_err(dev, "failed to install irq (%d)\n", ret); |
| goto err_clk; |
| } |
| |
| ret = v4l2_device_register(dev, &gsc->v4l2_dev); |
| if (ret) |
| goto err_clk; |
| |
| ret = gsc_register_m2m_device(gsc); |
| if (ret) |
| goto err_v4l2; |
| |
| platform_set_drvdata(pdev, gsc); |
| |
| gsc_hw_set_sw_reset(gsc); |
| gsc_wait_reset(gsc); |
| |
| vb2_dma_contig_set_max_seg_size(dev, DMA_BIT_MASK(32)); |
| |
| dev_dbg(dev, "gsc-%d registered successfully\n", gsc->id); |
| |
| pm_runtime_set_active(dev); |
| pm_runtime_enable(dev); |
| |
| return 0; |
| |
| err_v4l2: |
| v4l2_device_unregister(&gsc->v4l2_dev); |
| err_clk: |
| for (i = gsc->num_clocks - 1; i >= 0; i--) |
| clk_disable_unprepare(gsc->clock[i]); |
| return ret; |
| } |
| |
| static int gsc_remove(struct platform_device *pdev) |
| { |
| struct gsc_dev *gsc = platform_get_drvdata(pdev); |
| int i; |
| |
| pm_runtime_get_sync(&pdev->dev); |
| |
| gsc_unregister_m2m_device(gsc); |
| v4l2_device_unregister(&gsc->v4l2_dev); |
| |
| vb2_dma_contig_clear_max_seg_size(&pdev->dev); |
| for (i = 0; i < gsc->num_clocks; i++) |
| clk_disable_unprepare(gsc->clock[i]); |
| |
| pm_runtime_put_noidle(&pdev->dev); |
| pm_runtime_disable(&pdev->dev); |
| |
| dev_dbg(&pdev->dev, "%s driver unloaded\n", pdev->name); |
| return 0; |
| } |
| |
| #ifdef CONFIG_PM |
| static int gsc_m2m_suspend(struct gsc_dev *gsc) |
| { |
| unsigned long flags; |
| int timeout; |
| |
| spin_lock_irqsave(&gsc->slock, flags); |
| if (!gsc_m2m_pending(gsc)) { |
| spin_unlock_irqrestore(&gsc->slock, flags); |
| return 0; |
| } |
| clear_bit(ST_M2M_SUSPENDED, &gsc->state); |
| set_bit(ST_M2M_SUSPENDING, &gsc->state); |
| spin_unlock_irqrestore(&gsc->slock, flags); |
| |
| timeout = wait_event_timeout(gsc->irq_queue, |
| test_bit(ST_M2M_SUSPENDED, &gsc->state), |
| GSC_SHUTDOWN_TIMEOUT); |
| |
| clear_bit(ST_M2M_SUSPENDING, &gsc->state); |
| return timeout == 0 ? -EAGAIN : 0; |
| } |
| |
| static void gsc_m2m_resume(struct gsc_dev *gsc) |
| { |
| struct gsc_ctx *ctx; |
| unsigned long flags; |
| |
| spin_lock_irqsave(&gsc->slock, flags); |
| /* Clear for full H/W setup in first run after resume */ |
| ctx = gsc->m2m.ctx; |
| gsc->m2m.ctx = NULL; |
| spin_unlock_irqrestore(&gsc->slock, flags); |
| |
| if (test_and_clear_bit(ST_M2M_SUSPENDED, &gsc->state)) |
| gsc_m2m_job_finish(ctx, VB2_BUF_STATE_ERROR); |
| } |
| |
| static int gsc_runtime_resume(struct device *dev) |
| { |
| struct gsc_dev *gsc = dev_get_drvdata(dev); |
| int ret = 0; |
| int i; |
| |
| pr_debug("gsc%d: state: 0x%lx\n", gsc->id, gsc->state); |
| |
| for (i = 0; i < gsc->num_clocks; i++) { |
| ret = clk_prepare_enable(gsc->clock[i]); |
| if (ret) { |
| while (--i >= 0) |
| clk_disable_unprepare(gsc->clock[i]); |
| return ret; |
| } |
| } |
| |
| gsc_hw_set_sw_reset(gsc); |
| gsc_wait_reset(gsc); |
| gsc_m2m_resume(gsc); |
| |
| return 0; |
| } |
| |
| static int gsc_runtime_suspend(struct device *dev) |
| { |
| struct gsc_dev *gsc = dev_get_drvdata(dev); |
| int ret = 0; |
| int i; |
| |
| ret = gsc_m2m_suspend(gsc); |
| if (ret) |
| return ret; |
| |
| for (i = gsc->num_clocks - 1; i >= 0; i--) |
| clk_disable_unprepare(gsc->clock[i]); |
| |
| pr_debug("gsc%d: state: 0x%lx\n", gsc->id, gsc->state); |
| return ret; |
| } |
| #endif |
| |
| static const struct dev_pm_ops gsc_pm_ops = { |
| SET_SYSTEM_SLEEP_PM_OPS(pm_runtime_force_suspend, |
| pm_runtime_force_resume) |
| SET_RUNTIME_PM_OPS(gsc_runtime_suspend, gsc_runtime_resume, NULL) |
| }; |
| |
| static struct platform_driver gsc_driver = { |
| .probe = gsc_probe, |
| .remove = gsc_remove, |
| .driver = { |
| .name = GSC_MODULE_NAME, |
| .pm = &gsc_pm_ops, |
| .of_match_table = exynos_gsc_match, |
| } |
| }; |
| |
| module_platform_driver(gsc_driver); |
| |
| MODULE_AUTHOR("Hyunwong Kim <khw0178.kim@samsung.com>"); |
| MODULE_DESCRIPTION("Samsung EXYNOS5 Soc series G-Scaler driver"); |
| MODULE_LICENSE("GPL"); |