| /* |
| * CAAM/SEC 4.x transport/backend driver |
| * JobR backend functionality |
| * |
| * Copyright 2008-2012 Freescale Semiconductor, Inc. |
| */ |
| |
| #include "compat.h" |
| #include "regs.h" |
| #include "jr.h" |
| #include "desc.h" |
| #include "intern.h" |
| |
| /* Main per-ring interrupt handler */ |
| static irqreturn_t caam_jr_interrupt(int irq, void *st_dev) |
| { |
| struct device *dev = st_dev; |
| struct caam_drv_private_jr *jrp = dev_get_drvdata(dev); |
| u32 irqstate; |
| |
| /* |
| * Check the output ring for ready responses, kick |
| * tasklet if jobs done. |
| */ |
| irqstate = rd_reg32(&jrp->rregs->jrintstatus); |
| if (!irqstate) |
| return IRQ_NONE; |
| |
| /* |
| * If JobR error, we got more development work to do |
| * Flag a bug now, but we really need to shut down and |
| * restart the queue (and fix code). |
| */ |
| if (irqstate & JRINT_JR_ERROR) { |
| dev_err(dev, "job ring error: irqstate: %08x\n", irqstate); |
| BUG(); |
| } |
| |
| /* mask valid interrupts */ |
| setbits32(&jrp->rregs->rconfig_lo, JRCFG_IMSK); |
| |
| /* Have valid interrupt at this point, just ACK and trigger */ |
| wr_reg32(&jrp->rregs->jrintstatus, irqstate); |
| |
| preempt_disable(); |
| tasklet_schedule(&jrp->irqtask); |
| preempt_enable(); |
| |
| return IRQ_HANDLED; |
| } |
| |
| /* Deferred service handler, run as interrupt-fired tasklet */ |
| static void caam_jr_dequeue(unsigned long devarg) |
| { |
| int hw_idx, sw_idx, i, head, tail; |
| struct device *dev = (struct device *)devarg; |
| struct caam_drv_private_jr *jrp = dev_get_drvdata(dev); |
| void (*usercall)(struct device *dev, u32 *desc, u32 status, void *arg); |
| u32 *userdesc, userstatus; |
| void *userarg; |
| |
| while (rd_reg32(&jrp->rregs->outring_used)) { |
| |
| head = ACCESS_ONCE(jrp->head); |
| |
| spin_lock(&jrp->outlock); |
| |
| sw_idx = tail = jrp->tail; |
| hw_idx = jrp->out_ring_read_index; |
| |
| for (i = 0; CIRC_CNT(head, tail + i, JOBR_DEPTH) >= 1; i++) { |
| sw_idx = (tail + i) & (JOBR_DEPTH - 1); |
| |
| smp_read_barrier_depends(); |
| |
| if (jrp->outring[hw_idx].desc == |
| jrp->entinfo[sw_idx].desc_addr_dma) |
| break; /* found */ |
| } |
| /* we should never fail to find a matching descriptor */ |
| BUG_ON(CIRC_CNT(head, tail + i, JOBR_DEPTH) <= 0); |
| |
| /* Unmap just-run descriptor so we can post-process */ |
| dma_unmap_single(dev, jrp->outring[hw_idx].desc, |
| jrp->entinfo[sw_idx].desc_size, |
| DMA_TO_DEVICE); |
| |
| /* mark completed, avoid matching on a recycled desc addr */ |
| jrp->entinfo[sw_idx].desc_addr_dma = 0; |
| |
| /* Stash callback params for use outside of lock */ |
| usercall = jrp->entinfo[sw_idx].callbk; |
| userarg = jrp->entinfo[sw_idx].cbkarg; |
| userdesc = jrp->entinfo[sw_idx].desc_addr_virt; |
| userstatus = jrp->outring[hw_idx].jrstatus; |
| |
| /* set done */ |
| wr_reg32(&jrp->rregs->outring_rmvd, 1); |
| |
| jrp->out_ring_read_index = (jrp->out_ring_read_index + 1) & |
| (JOBR_DEPTH - 1); |
| |
| /* |
| * if this job completed out-of-order, do not increment |
| * the tail. Otherwise, increment tail by 1 plus the |
| * number of subsequent jobs already completed out-of-order |
| */ |
| if (sw_idx == tail) { |
| do { |
| tail = (tail + 1) & (JOBR_DEPTH - 1); |
| smp_read_barrier_depends(); |
| } while (CIRC_CNT(head, tail, JOBR_DEPTH) >= 1 && |
| jrp->entinfo[tail].desc_addr_dma == 0); |
| |
| jrp->tail = tail; |
| } |
| |
| spin_unlock(&jrp->outlock); |
| |
| /* Finally, execute user's callback */ |
| usercall(dev, userdesc, userstatus, userarg); |
| } |
| |
| /* reenable / unmask IRQs */ |
| clrbits32(&jrp->rregs->rconfig_lo, JRCFG_IMSK); |
| } |
| |
| /** |
| * caam_jr_enqueue() - Enqueue a job descriptor head. Returns 0 if OK, |
| * -EBUSY if the queue is full, -EIO if it cannot map the caller's |
| * descriptor. |
| * @dev: device of the job ring to be used. This device should have |
| * been assigned prior by caam_jr_register(). |
| * @desc: points to a job descriptor that execute our request. All |
| * descriptors (and all referenced data) must be in a DMAable |
| * region, and all data references must be physical addresses |
| * accessible to CAAM (i.e. within a PAMU window granted |
| * to it). |
| * @cbk: pointer to a callback function to be invoked upon completion |
| * of this request. This has the form: |
| * callback(struct device *dev, u32 *desc, u32 stat, void *arg) |
| * where: |
| * @dev: contains the job ring device that processed this |
| * response. |
| * @desc: descriptor that initiated the request, same as |
| * "desc" being argued to caam_jr_enqueue(). |
| * @status: untranslated status received from CAAM. See the |
| * reference manual for a detailed description of |
| * error meaning, or see the JRSTA definitions in the |
| * register header file |
| * @areq: optional pointer to an argument passed with the |
| * original request |
| * @areq: optional pointer to a user argument for use at callback |
| * time. |
| **/ |
| int caam_jr_enqueue(struct device *dev, u32 *desc, |
| void (*cbk)(struct device *dev, u32 *desc, |
| u32 status, void *areq), |
| void *areq) |
| { |
| struct caam_drv_private_jr *jrp = dev_get_drvdata(dev); |
| struct caam_jrentry_info *head_entry; |
| int head, tail, desc_size; |
| dma_addr_t desc_dma; |
| |
| desc_size = (*desc & HDR_JD_LENGTH_MASK) * sizeof(u32); |
| desc_dma = dma_map_single(dev, desc, desc_size, DMA_TO_DEVICE); |
| if (dma_mapping_error(dev, desc_dma)) { |
| dev_err(dev, "caam_jr_enqueue(): can't map jobdesc\n"); |
| return -EIO; |
| } |
| |
| spin_lock_bh(&jrp->inplock); |
| |
| head = jrp->head; |
| tail = ACCESS_ONCE(jrp->tail); |
| |
| if (!rd_reg32(&jrp->rregs->inpring_avail) || |
| CIRC_SPACE(head, tail, JOBR_DEPTH) <= 0) { |
| spin_unlock_bh(&jrp->inplock); |
| dma_unmap_single(dev, desc_dma, desc_size, DMA_TO_DEVICE); |
| return -EBUSY; |
| } |
| |
| head_entry = &jrp->entinfo[head]; |
| head_entry->desc_addr_virt = desc; |
| head_entry->desc_size = desc_size; |
| head_entry->callbk = (void *)cbk; |
| head_entry->cbkarg = areq; |
| head_entry->desc_addr_dma = desc_dma; |
| |
| jrp->inpring[jrp->inp_ring_write_index] = desc_dma; |
| |
| smp_wmb(); |
| |
| jrp->inp_ring_write_index = (jrp->inp_ring_write_index + 1) & |
| (JOBR_DEPTH - 1); |
| jrp->head = (head + 1) & (JOBR_DEPTH - 1); |
| |
| wr_reg32(&jrp->rregs->inpring_jobadd, 1); |
| |
| spin_unlock_bh(&jrp->inplock); |
| |
| return 0; |
| } |
| EXPORT_SYMBOL(caam_jr_enqueue); |
| |
| static int caam_reset_hw_jr(struct device *dev) |
| { |
| struct caam_drv_private_jr *jrp = dev_get_drvdata(dev); |
| unsigned int timeout = 100000; |
| |
| /* |
| * mask interrupts since we are going to poll |
| * for reset completion status |
| */ |
| setbits32(&jrp->rregs->rconfig_lo, JRCFG_IMSK); |
| |
| /* initiate flush (required prior to reset) */ |
| wr_reg32(&jrp->rregs->jrcommand, JRCR_RESET); |
| while (((rd_reg32(&jrp->rregs->jrintstatus) & JRINT_ERR_HALT_MASK) == |
| JRINT_ERR_HALT_INPROGRESS) && --timeout) |
| cpu_relax(); |
| |
| if ((rd_reg32(&jrp->rregs->jrintstatus) & JRINT_ERR_HALT_MASK) != |
| JRINT_ERR_HALT_COMPLETE || timeout == 0) { |
| dev_err(dev, "failed to flush job ring %d\n", jrp->ridx); |
| return -EIO; |
| } |
| |
| /* initiate reset */ |
| timeout = 100000; |
| wr_reg32(&jrp->rregs->jrcommand, JRCR_RESET); |
| while ((rd_reg32(&jrp->rregs->jrcommand) & JRCR_RESET) && --timeout) |
| cpu_relax(); |
| |
| if (timeout == 0) { |
| dev_err(dev, "failed to reset job ring %d\n", jrp->ridx); |
| return -EIO; |
| } |
| |
| /* unmask interrupts */ |
| clrbits32(&jrp->rregs->rconfig_lo, JRCFG_IMSK); |
| |
| return 0; |
| } |
| |
| /* |
| * Init JobR independent of platform property detection |
| */ |
| static int caam_jr_init(struct device *dev) |
| { |
| struct caam_drv_private_jr *jrp; |
| dma_addr_t inpbusaddr, outbusaddr; |
| int i, error; |
| |
| jrp = dev_get_drvdata(dev); |
| |
| tasklet_init(&jrp->irqtask, caam_jr_dequeue, (unsigned long)dev); |
| |
| /* Connect job ring interrupt handler. */ |
| error = request_irq(jrp->irq, caam_jr_interrupt, IRQF_SHARED, |
| "caam-jobr", dev); |
| if (error) { |
| dev_err(dev, "can't connect JobR %d interrupt (%d)\n", |
| jrp->ridx, jrp->irq); |
| irq_dispose_mapping(jrp->irq); |
| jrp->irq = 0; |
| return -EINVAL; |
| } |
| |
| error = caam_reset_hw_jr(dev); |
| if (error) |
| return error; |
| |
| jrp->inpring = dma_alloc_coherent(dev, sizeof(dma_addr_t) * JOBR_DEPTH, |
| &inpbusaddr, GFP_KERNEL); |
| |
| jrp->outring = dma_alloc_coherent(dev, sizeof(struct jr_outentry) * |
| JOBR_DEPTH, &outbusaddr, GFP_KERNEL); |
| |
| jrp->entinfo = kzalloc(sizeof(struct caam_jrentry_info) * JOBR_DEPTH, |
| GFP_KERNEL); |
| |
| if ((jrp->inpring == NULL) || (jrp->outring == NULL) || |
| (jrp->entinfo == NULL)) { |
| dev_err(dev, "can't allocate job rings for %d\n", |
| jrp->ridx); |
| return -ENOMEM; |
| } |
| |
| for (i = 0; i < JOBR_DEPTH; i++) |
| jrp->entinfo[i].desc_addr_dma = !0; |
| |
| /* Setup rings */ |
| jrp->inp_ring_write_index = 0; |
| jrp->out_ring_read_index = 0; |
| jrp->head = 0; |
| jrp->tail = 0; |
| |
| wr_reg64(&jrp->rregs->inpring_base, inpbusaddr); |
| wr_reg64(&jrp->rregs->outring_base, outbusaddr); |
| wr_reg32(&jrp->rregs->inpring_size, JOBR_DEPTH); |
| wr_reg32(&jrp->rregs->outring_size, JOBR_DEPTH); |
| |
| jrp->ringsize = JOBR_DEPTH; |
| |
| spin_lock_init(&jrp->inplock); |
| spin_lock_init(&jrp->outlock); |
| |
| /* Select interrupt coalescing parameters */ |
| setbits32(&jrp->rregs->rconfig_lo, JOBR_INTC | |
| (JOBR_INTC_COUNT_THLD << JRCFG_ICDCT_SHIFT) | |
| (JOBR_INTC_TIME_THLD << JRCFG_ICTT_SHIFT)); |
| |
| return 0; |
| } |
| |
| /* |
| * Shutdown JobR independent of platform property code |
| */ |
| int caam_jr_shutdown(struct device *dev) |
| { |
| struct caam_drv_private_jr *jrp = dev_get_drvdata(dev); |
| dma_addr_t inpbusaddr, outbusaddr; |
| int ret; |
| |
| ret = caam_reset_hw_jr(dev); |
| |
| tasklet_kill(&jrp->irqtask); |
| |
| /* Release interrupt */ |
| free_irq(jrp->irq, dev); |
| |
| /* Free rings */ |
| inpbusaddr = rd_reg64(&jrp->rregs->inpring_base); |
| outbusaddr = rd_reg64(&jrp->rregs->outring_base); |
| dma_free_coherent(dev, sizeof(dma_addr_t) * JOBR_DEPTH, |
| jrp->inpring, inpbusaddr); |
| dma_free_coherent(dev, sizeof(struct jr_outentry) * JOBR_DEPTH, |
| jrp->outring, outbusaddr); |
| kfree(jrp->entinfo); |
| of_device_unregister(jrp->jr_pdev); |
| |
| return ret; |
| } |
| |
| /* |
| * Probe routine for each detected JobR subsystem. It assumes that |
| * property detection was picked up externally. |
| */ |
| int caam_jr_probe(struct platform_device *pdev, struct device_node *np, |
| int ring) |
| { |
| struct device *ctrldev, *jrdev; |
| struct platform_device *jr_pdev; |
| struct caam_drv_private *ctrlpriv; |
| struct caam_drv_private_jr *jrpriv; |
| u32 *jroffset; |
| int error; |
| |
| ctrldev = &pdev->dev; |
| ctrlpriv = dev_get_drvdata(ctrldev); |
| |
| jrpriv = kmalloc(sizeof(struct caam_drv_private_jr), |
| GFP_KERNEL); |
| if (jrpriv == NULL) { |
| dev_err(ctrldev, "can't alloc private mem for job ring %d\n", |
| ring); |
| return -ENOMEM; |
| } |
| jrpriv->parentdev = ctrldev; /* point back to parent */ |
| jrpriv->ridx = ring; /* save ring identity relative to detection */ |
| |
| /* |
| * Derive a pointer to the detected JobRs regs |
| * Driver has already iomapped the entire space, we just |
| * need to add in the offset to this JobR. Don't know if I |
| * like this long-term, but it'll run |
| */ |
| jroffset = (u32 *)of_get_property(np, "reg", NULL); |
| jrpriv->rregs = (struct caam_job_ring __iomem *)((void *)ctrlpriv->ctrl |
| + *jroffset); |
| |
| /* Build a local dev for each detected queue */ |
| jr_pdev = of_platform_device_create(np, NULL, ctrldev); |
| if (jr_pdev == NULL) { |
| kfree(jrpriv); |
| return -EINVAL; |
| } |
| |
| jrpriv->jr_pdev = jr_pdev; |
| jrdev = &jr_pdev->dev; |
| dev_set_drvdata(jrdev, jrpriv); |
| ctrlpriv->jrdev[ring] = jrdev; |
| |
| if (sizeof(dma_addr_t) == sizeof(u64)) |
| if (of_device_is_compatible(np, "fsl,sec-v5.0-job-ring")) |
| dma_set_mask(jrdev, DMA_BIT_MASK(40)); |
| else |
| dma_set_mask(jrdev, DMA_BIT_MASK(36)); |
| else |
| dma_set_mask(jrdev, DMA_BIT_MASK(32)); |
| |
| /* Identify the interrupt */ |
| jrpriv->irq = of_irq_to_resource(np, 0, NULL); |
| |
| /* Now do the platform independent part */ |
| error = caam_jr_init(jrdev); /* now turn on hardware */ |
| if (error) { |
| of_device_unregister(jr_pdev); |
| kfree(jrpriv); |
| return error; |
| } |
| |
| return error; |
| } |