| * Freescale Smart Direct Memory Access (SDMA) Controller for i.MX |
| |
| Required properties: |
| - compatible : Should be one of |
| "fsl,imx25-sdma" |
| "fsl,imx31-sdma", "fsl,imx31-to1-sdma", "fsl,imx31-to2-sdma" |
| "fsl,imx35-sdma", "fsl,imx35-to1-sdma", "fsl,imx35-to2-sdma" |
| "fsl,imx51-sdma" |
| "fsl,imx53-sdma" |
| "fsl,imx6q-sdma" |
| The -to variants should be preferred since they allow to determine the |
| correct ROM script addresses needed for the driver to work without additional |
| firmware. |
| - reg : Should contain SDMA registers location and length |
| - interrupts : Should contain SDMA interrupt |
| - #dma-cells : Must be <3>. |
| The first cell specifies the DMA request/event ID. See details below |
| about the second and third cell. |
| - fsl,sdma-ram-script-name : Should contain the full path of SDMA RAM |
| scripts firmware |
| |
| The second cell of dma phandle specifies the peripheral type of DMA transfer. |
| The full ID of peripheral types can be found below. |
| |
| ID transfer type |
| --------------------- |
| 0 MCU domain SSI |
| 1 Shared SSI |
| 2 MMC |
| 3 SDHC |
| 4 MCU domain UART |
| 5 Shared UART |
| 6 FIRI |
| 7 MCU domain CSPI |
| 8 Shared CSPI |
| 9 SIM |
| 10 ATA |
| 11 CCM |
| 12 External peripheral |
| 13 Memory Stick Host Controller |
| 14 Shared Memory Stick Host Controller |
| 15 DSP |
| 16 Memory |
| 17 FIFO type Memory |
| 18 SPDIF |
| 19 IPU Memory |
| 20 ASRC |
| 21 ESAI |
| 22 SSI Dual FIFO (needs firmware ver >= 2) |
| 23 Shared ASRC |
| |
| The third cell specifies the transfer priority as below. |
| |
| ID transfer priority |
| ------------------------- |
| 0 High |
| 1 Medium |
| 2 Low |
| |
| Examples: |
| |
| sdma@83fb0000 { |
| compatible = "fsl,imx51-sdma", "fsl,imx35-sdma"; |
| reg = <0x83fb0000 0x4000>; |
| interrupts = <6>; |
| #dma-cells = <3>; |
| fsl,sdma-ram-script-name = "sdma-imx51.bin"; |
| }; |
| |
| DMA clients connected to the i.MX SDMA controller must use the format |
| described in the dma.txt file. |
| |
| Examples: |
| |
| ssi2: ssi@70014000 { |
| compatible = "fsl,imx51-ssi", "fsl,imx21-ssi"; |
| reg = <0x70014000 0x4000>; |
| interrupts = <30>; |
| clocks = <&clks 49>; |
| dmas = <&sdma 24 1 0>, |
| <&sdma 25 1 0>; |
| dma-names = "rx", "tx"; |
| fsl,fifo-depth = <15>; |
| }; |