| // SPDX-License-Identifier: GPL-2.0-or-later |
| /* |
| * ISA DMA support functions |
| * Copyright (c) by Jaroslav Kysela <perex@perex.cz> |
| */ |
| |
| /* |
| * Defining following add some delay. Maybe this helps for some broken |
| * ISA DMA controllers. |
| */ |
| |
| #undef HAVE_REALLY_SLOW_DMA_CONTROLLER |
| |
| #include <linux/export.h> |
| #include <linux/isa-dma.h> |
| #include <sound/core.h> |
| |
| /** |
| * snd_dma_program - program an ISA DMA transfer |
| * @dma: the dma number |
| * @addr: the physical address of the buffer |
| * @size: the DMA transfer size |
| * @mode: the DMA transfer mode, DMA_MODE_XXX |
| * |
| * Programs an ISA DMA transfer for the given buffer. |
| */ |
| void snd_dma_program(unsigned long dma, |
| unsigned long addr, unsigned int size, |
| unsigned short mode) |
| { |
| unsigned long flags; |
| |
| flags = claim_dma_lock(); |
| disable_dma(dma); |
| clear_dma_ff(dma); |
| set_dma_mode(dma, mode); |
| set_dma_addr(dma, addr); |
| set_dma_count(dma, size); |
| if (!(mode & DMA_MODE_NO_ENABLE)) |
| enable_dma(dma); |
| release_dma_lock(flags); |
| } |
| EXPORT_SYMBOL(snd_dma_program); |
| |
| /** |
| * snd_dma_disable - stop the ISA DMA transfer |
| * @dma: the dma number |
| * |
| * Stops the ISA DMA transfer. |
| */ |
| void snd_dma_disable(unsigned long dma) |
| { |
| unsigned long flags; |
| |
| flags = claim_dma_lock(); |
| clear_dma_ff(dma); |
| disable_dma(dma); |
| release_dma_lock(flags); |
| } |
| EXPORT_SYMBOL(snd_dma_disable); |
| |
| /** |
| * snd_dma_pointer - return the current pointer to DMA transfer buffer in bytes |
| * @dma: the dma number |
| * @size: the dma transfer size |
| * |
| * Return: The current pointer in DMA transfer buffer in bytes. |
| */ |
| unsigned int snd_dma_pointer(unsigned long dma, unsigned int size) |
| { |
| unsigned long flags; |
| unsigned int result, result1; |
| |
| flags = claim_dma_lock(); |
| clear_dma_ff(dma); |
| if (!isa_dma_bridge_buggy) |
| disable_dma(dma); |
| result = get_dma_residue(dma); |
| /* |
| * HACK - read the counter again and choose higher value in order to |
| * avoid reading during counter lower byte roll over if the |
| * isa_dma_bridge_buggy is set. |
| */ |
| result1 = get_dma_residue(dma); |
| if (!isa_dma_bridge_buggy) |
| enable_dma(dma); |
| release_dma_lock(flags); |
| if (unlikely(result < result1)) |
| result = result1; |
| #ifdef CONFIG_SND_DEBUG |
| if (result > size) |
| pr_err("ALSA: pointer (0x%x) for DMA #%ld is greater than transfer size (0x%x)\n", result, dma, size); |
| #endif |
| if (result >= size || result == 0) |
| return 0; |
| else |
| return size - result; |
| } |
| EXPORT_SYMBOL(snd_dma_pointer); |
| |
| struct snd_dma_data { |
| int dma; |
| }; |
| |
| static void __snd_release_dma(struct device *dev, void *data) |
| { |
| struct snd_dma_data *p = data; |
| |
| snd_dma_disable(p->dma); |
| free_dma(p->dma); |
| } |
| |
| /** |
| * snd_devm_request_dma - the managed version of request_dma() |
| * @dev: the device pointer |
| * @dma: the dma number |
| * @name: the name string of the requester |
| * |
| * The requested DMA will be automatically released at unbinding via devres. |
| * |
| * Return: zero on success, or a negative error code |
| */ |
| int snd_devm_request_dma(struct device *dev, int dma, const char *name) |
| { |
| struct snd_dma_data *p; |
| |
| if (request_dma(dma, name)) |
| return -EBUSY; |
| p = devres_alloc(__snd_release_dma, sizeof(*p), GFP_KERNEL); |
| if (!p) { |
| free_dma(dma); |
| return -ENOMEM; |
| } |
| p->dma = dma; |
| devres_add(dev, p); |
| return 0; |
| } |
| EXPORT_SYMBOL_GPL(snd_devm_request_dma); |