| /* |
| * Panasonic MN88472 DVB-T/T2/C demodulator driver |
| * |
| * Copyright (C) 2013 Antti Palosaari <crope@iki.fi> |
| * |
| * This program is free software; you can redistribute it and/or modify |
| * it under the terms of the GNU General Public License as published by |
| * the Free Software Foundation; either version 2 of the License, or |
| * (at your option) any later version. |
| * |
| * This program is distributed in the hope that it will be useful, |
| * but WITHOUT ANY WARRANTY; without even the implied warranty of |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| * GNU General Public License for more details. |
| */ |
| |
| #include "mn88472_priv.h" |
| |
| static int mn88472_get_tune_settings(struct dvb_frontend *fe, |
| struct dvb_frontend_tune_settings *s) |
| { |
| s->min_delay_ms = 1000; |
| return 0; |
| } |
| |
| static int mn88472_read_status(struct dvb_frontend *fe, enum fe_status *status) |
| { |
| struct i2c_client *client = fe->demodulator_priv; |
| struct mn88472_dev *dev = i2c_get_clientdata(client); |
| struct dtv_frontend_properties *c = &fe->dtv_property_cache; |
| int ret; |
| unsigned int utmp; |
| |
| if (!dev->active) { |
| ret = -EAGAIN; |
| goto err; |
| } |
| |
| switch (c->delivery_system) { |
| case SYS_DVBT: |
| ret = regmap_read(dev->regmap[0], 0x7f, &utmp); |
| if (ret) |
| goto err; |
| if ((utmp & 0x0f) >= 0x09) |
| *status = FE_HAS_SIGNAL | FE_HAS_CARRIER | |
| FE_HAS_VITERBI | FE_HAS_SYNC | FE_HAS_LOCK; |
| else |
| *status = 0; |
| break; |
| case SYS_DVBT2: |
| ret = regmap_read(dev->regmap[2], 0x92, &utmp); |
| if (ret) |
| goto err; |
| if ((utmp & 0x0f) >= 0x0d) |
| *status = FE_HAS_SIGNAL | FE_HAS_CARRIER | |
| FE_HAS_VITERBI | FE_HAS_SYNC | FE_HAS_LOCK; |
| else if ((utmp & 0x0f) >= 0x0a) |
| *status = FE_HAS_SIGNAL | FE_HAS_CARRIER | |
| FE_HAS_VITERBI; |
| else if ((utmp & 0x0f) >= 0x07) |
| *status = FE_HAS_SIGNAL | FE_HAS_CARRIER; |
| else |
| *status = 0; |
| break; |
| case SYS_DVBC_ANNEX_A: |
| ret = regmap_read(dev->regmap[1], 0x84, &utmp); |
| if (ret) |
| goto err; |
| if ((utmp & 0x0f) >= 0x08) |
| *status = FE_HAS_SIGNAL | FE_HAS_CARRIER | |
| FE_HAS_VITERBI | FE_HAS_SYNC | FE_HAS_LOCK; |
| else |
| *status = 0; |
| break; |
| default: |
| ret = -EINVAL; |
| goto err; |
| } |
| |
| return 0; |
| err: |
| dev_dbg(&client->dev, "failed=%d\n", ret); |
| return ret; |
| } |
| |
| static int mn88472_set_frontend(struct dvb_frontend *fe) |
| { |
| struct i2c_client *client = fe->demodulator_priv; |
| struct mn88472_dev *dev = i2c_get_clientdata(client); |
| struct dtv_frontend_properties *c = &fe->dtv_property_cache; |
| int ret, i; |
| unsigned int utmp; |
| u32 if_frequency; |
| u8 buf[3], delivery_system_val, bandwidth_val, *bandwidth_vals_ptr; |
| u8 reg_bank0_b4_val, reg_bank0_cd_val, reg_bank0_d4_val; |
| u8 reg_bank0_d6_val; |
| |
| dev_dbg(&client->dev, |
| "delivery_system=%u modulation=%u frequency=%u bandwidth_hz=%u symbol_rate=%u inversion=%d stream_id=%d\n", |
| c->delivery_system, c->modulation, c->frequency, |
| c->bandwidth_hz, c->symbol_rate, c->inversion, c->stream_id); |
| |
| if (!dev->active) { |
| ret = -EAGAIN; |
| goto err; |
| } |
| |
| switch (c->delivery_system) { |
| case SYS_DVBT: |
| delivery_system_val = 0x02; |
| reg_bank0_b4_val = 0x00; |
| reg_bank0_cd_val = 0x1f; |
| reg_bank0_d4_val = 0x0a; |
| reg_bank0_d6_val = 0x48; |
| break; |
| case SYS_DVBT2: |
| delivery_system_val = 0x03; |
| reg_bank0_b4_val = 0xf6; |
| reg_bank0_cd_val = 0x01; |
| reg_bank0_d4_val = 0x09; |
| reg_bank0_d6_val = 0x46; |
| break; |
| case SYS_DVBC_ANNEX_A: |
| delivery_system_val = 0x04; |
| reg_bank0_b4_val = 0x00; |
| reg_bank0_cd_val = 0x17; |
| reg_bank0_d4_val = 0x09; |
| reg_bank0_d6_val = 0x48; |
| break; |
| default: |
| ret = -EINVAL; |
| goto err; |
| } |
| |
| switch (c->delivery_system) { |
| case SYS_DVBT: |
| case SYS_DVBT2: |
| switch (c->bandwidth_hz) { |
| case 5000000: |
| bandwidth_vals_ptr = "\xe5\x99\x9a\x1b\xa9\x1b\xa9"; |
| bandwidth_val = 0x03; |
| break; |
| case 6000000: |
| bandwidth_vals_ptr = "\xbf\x55\x55\x15\x6b\x15\x6b"; |
| bandwidth_val = 0x02; |
| break; |
| case 7000000: |
| bandwidth_vals_ptr = "\xa4\x00\x00\x0f\x2c\x0f\x2c"; |
| bandwidth_val = 0x01; |
| break; |
| case 8000000: |
| bandwidth_vals_ptr = "\x8f\x80\x00\x08\xee\x08\xee"; |
| bandwidth_val = 0x00; |
| break; |
| default: |
| ret = -EINVAL; |
| goto err; |
| } |
| break; |
| case SYS_DVBC_ANNEX_A: |
| bandwidth_vals_ptr = NULL; |
| bandwidth_val = 0x00; |
| break; |
| default: |
| break; |
| } |
| |
| /* Program tuner */ |
| if (fe->ops.tuner_ops.set_params) { |
| ret = fe->ops.tuner_ops.set_params(fe); |
| if (ret) |
| goto err; |
| } |
| |
| if (fe->ops.tuner_ops.get_if_frequency) { |
| ret = fe->ops.tuner_ops.get_if_frequency(fe, &if_frequency); |
| if (ret) |
| goto err; |
| |
| dev_dbg(&client->dev, "get_if_frequency=%d\n", if_frequency); |
| } else { |
| ret = -EINVAL; |
| goto err; |
| } |
| |
| ret = regmap_write(dev->regmap[2], 0x00, 0x66); |
| if (ret) |
| goto err; |
| ret = regmap_write(dev->regmap[2], 0x01, 0x00); |
| if (ret) |
| goto err; |
| ret = regmap_write(dev->regmap[2], 0x02, 0x01); |
| if (ret) |
| goto err; |
| ret = regmap_write(dev->regmap[2], 0x03, delivery_system_val); |
| if (ret) |
| goto err; |
| ret = regmap_write(dev->regmap[2], 0x04, bandwidth_val); |
| if (ret) |
| goto err; |
| |
| /* IF */ |
| utmp = DIV_ROUND_CLOSEST_ULL((u64)if_frequency * 0x1000000, dev->clk); |
| buf[0] = (utmp >> 16) & 0xff; |
| buf[1] = (utmp >> 8) & 0xff; |
| buf[2] = (utmp >> 0) & 0xff; |
| for (i = 0; i < 3; i++) { |
| ret = regmap_write(dev->regmap[2], 0x10 + i, buf[i]); |
| if (ret) |
| goto err; |
| } |
| |
| /* Bandwidth */ |
| if (bandwidth_vals_ptr) { |
| for (i = 0; i < 7; i++) { |
| ret = regmap_write(dev->regmap[2], 0x13 + i, |
| bandwidth_vals_ptr[i]); |
| if (ret) |
| goto err; |
| } |
| } |
| |
| ret = regmap_write(dev->regmap[0], 0xb4, reg_bank0_b4_val); |
| if (ret) |
| goto err; |
| ret = regmap_write(dev->regmap[0], 0xcd, reg_bank0_cd_val); |
| if (ret) |
| goto err; |
| ret = regmap_write(dev->regmap[0], 0xd4, reg_bank0_d4_val); |
| if (ret) |
| goto err; |
| ret = regmap_write(dev->regmap[0], 0xd6, reg_bank0_d6_val); |
| if (ret) |
| goto err; |
| |
| switch (c->delivery_system) { |
| case SYS_DVBT: |
| ret = regmap_write(dev->regmap[0], 0x07, 0x26); |
| if (ret) |
| goto err; |
| ret = regmap_write(dev->regmap[0], 0x00, 0xba); |
| if (ret) |
| goto err; |
| ret = regmap_write(dev->regmap[0], 0x01, 0x13); |
| if (ret) |
| goto err; |
| break; |
| case SYS_DVBT2: |
| ret = regmap_write(dev->regmap[2], 0x2b, 0x13); |
| if (ret) |
| goto err; |
| ret = regmap_write(dev->regmap[2], 0x4f, 0x05); |
| if (ret) |
| goto err; |
| ret = regmap_write(dev->regmap[1], 0xf6, 0x05); |
| if (ret) |
| goto err; |
| ret = regmap_write(dev->regmap[2], 0x32, c->stream_id); |
| if (ret) |
| goto err; |
| break; |
| case SYS_DVBC_ANNEX_A: |
| break; |
| default: |
| break; |
| } |
| |
| /* Reset FSM */ |
| ret = regmap_write(dev->regmap[2], 0xf8, 0x9f); |
| if (ret) |
| goto err; |
| |
| return 0; |
| err: |
| dev_dbg(&client->dev, "failed=%d\n", ret); |
| return ret; |
| } |
| |
| static int mn88472_init(struct dvb_frontend *fe) |
| { |
| struct i2c_client *client = fe->demodulator_priv; |
| struct mn88472_dev *dev = i2c_get_clientdata(client); |
| int ret, len, rem; |
| unsigned int utmp; |
| const struct firmware *firmware; |
| const char *name = MN88472_FIRMWARE; |
| |
| dev_dbg(&client->dev, "\n"); |
| |
| /* Power up */ |
| ret = regmap_write(dev->regmap[2], 0x05, 0x00); |
| if (ret) |
| goto err; |
| ret = regmap_write(dev->regmap[2], 0x0b, 0x00); |
| if (ret) |
| goto err; |
| ret = regmap_write(dev->regmap[2], 0x0c, 0x00); |
| if (ret) |
| goto err; |
| |
| /* Check if firmware is already running */ |
| ret = regmap_read(dev->regmap[0], 0xf5, &utmp); |
| if (ret) |
| goto err; |
| if (!(utmp & 0x01)) |
| goto warm; |
| |
| ret = request_firmware(&firmware, name, &client->dev); |
| if (ret) { |
| dev_err(&client->dev, "firmware file '%s' not found\n", name); |
| goto err; |
| } |
| |
| dev_info(&client->dev, "downloading firmware from file '%s'\n", name); |
| |
| ret = regmap_write(dev->regmap[0], 0xf5, 0x03); |
| if (ret) |
| goto err_release_firmware; |
| |
| for (rem = firmware->size; rem > 0; rem -= (dev->i2c_write_max - 1)) { |
| len = min(dev->i2c_write_max - 1, rem); |
| ret = regmap_bulk_write(dev->regmap[0], 0xf6, |
| &firmware->data[firmware->size - rem], |
| len); |
| if (ret) { |
| dev_err(&client->dev, "firmware download failed %d\n", |
| ret); |
| goto err_release_firmware; |
| } |
| } |
| |
| /* Parity check of firmware */ |
| ret = regmap_read(dev->regmap[0], 0xf8, &utmp); |
| if (ret) |
| goto err_release_firmware; |
| if (utmp & 0x10) { |
| ret = -EINVAL; |
| dev_err(&client->dev, "firmware did not run\n"); |
| goto err_release_firmware; |
| } |
| |
| ret = regmap_write(dev->regmap[0], 0xf5, 0x00); |
| if (ret) |
| goto err_release_firmware; |
| |
| release_firmware(firmware); |
| warm: |
| /* TS config */ |
| switch (dev->ts_mode) { |
| case SERIAL_TS_MODE: |
| utmp = 0x1d; |
| break; |
| case PARALLEL_TS_MODE: |
| utmp = 0x00; |
| break; |
| default: |
| ret = -EINVAL; |
| goto err; |
| } |
| ret = regmap_write(dev->regmap[2], 0x08, utmp); |
| if (ret) |
| goto err; |
| |
| switch (dev->ts_clk) { |
| case VARIABLE_TS_CLOCK: |
| utmp = 0xe3; |
| break; |
| case FIXED_TS_CLOCK: |
| utmp = 0xe1; |
| break; |
| default: |
| ret = -EINVAL; |
| goto err; |
| } |
| ret = regmap_write(dev->regmap[0], 0xd9, utmp); |
| if (ret) |
| goto err; |
| |
| dev->active = true; |
| |
| return 0; |
| err_release_firmware: |
| release_firmware(firmware); |
| err: |
| dev_dbg(&client->dev, "failed=%d\n", ret); |
| return ret; |
| } |
| |
| static int mn88472_sleep(struct dvb_frontend *fe) |
| { |
| struct i2c_client *client = fe->demodulator_priv; |
| struct mn88472_dev *dev = i2c_get_clientdata(client); |
| int ret; |
| |
| dev_dbg(&client->dev, "\n"); |
| |
| /* Power down */ |
| ret = regmap_write(dev->regmap[2], 0x0c, 0x30); |
| if (ret) |
| goto err; |
| ret = regmap_write(dev->regmap[2], 0x0b, 0x30); |
| if (ret) |
| goto err; |
| ret = regmap_write(dev->regmap[2], 0x05, 0x3e); |
| if (ret) |
| goto err; |
| |
| return 0; |
| err: |
| dev_dbg(&client->dev, "failed=%d\n", ret); |
| return ret; |
| } |
| |
| static const struct dvb_frontend_ops mn88472_ops = { |
| .delsys = {SYS_DVBT, SYS_DVBT2, SYS_DVBC_ANNEX_A}, |
| .info = { |
| .name = "Panasonic MN88472", |
| .symbol_rate_min = 1000000, |
| .symbol_rate_max = 7200000, |
| .caps = FE_CAN_FEC_1_2 | |
| FE_CAN_FEC_2_3 | |
| FE_CAN_FEC_3_4 | |
| FE_CAN_FEC_5_6 | |
| FE_CAN_FEC_7_8 | |
| FE_CAN_FEC_AUTO | |
| FE_CAN_QPSK | |
| FE_CAN_QAM_16 | |
| FE_CAN_QAM_32 | |
| FE_CAN_QAM_64 | |
| FE_CAN_QAM_128 | |
| FE_CAN_QAM_256 | |
| FE_CAN_QAM_AUTO | |
| FE_CAN_TRANSMISSION_MODE_AUTO | |
| FE_CAN_GUARD_INTERVAL_AUTO | |
| FE_CAN_HIERARCHY_AUTO | |
| FE_CAN_MUTE_TS | |
| FE_CAN_2G_MODULATION | |
| FE_CAN_MULTISTREAM |
| }, |
| |
| .get_tune_settings = mn88472_get_tune_settings, |
| |
| .init = mn88472_init, |
| .sleep = mn88472_sleep, |
| |
| .set_frontend = mn88472_set_frontend, |
| |
| .read_status = mn88472_read_status, |
| }; |
| |
| static struct dvb_frontend *mn88472_get_dvb_frontend(struct i2c_client *client) |
| { |
| struct mn88472_dev *dev = i2c_get_clientdata(client); |
| |
| dev_dbg(&client->dev, "\n"); |
| |
| return &dev->fe; |
| } |
| |
| static int mn88472_probe(struct i2c_client *client, |
| const struct i2c_device_id *id) |
| { |
| struct mn88472_config *pdata = client->dev.platform_data; |
| struct mn88472_dev *dev; |
| int ret; |
| unsigned int utmp; |
| static const struct regmap_config regmap_config = { |
| .reg_bits = 8, |
| .val_bits = 8, |
| }; |
| |
| dev_dbg(&client->dev, "\n"); |
| |
| dev = kzalloc(sizeof(*dev), GFP_KERNEL); |
| if (!dev) { |
| ret = -ENOMEM; |
| goto err; |
| } |
| |
| dev->i2c_write_max = pdata->i2c_wr_max ? pdata->i2c_wr_max : ~0; |
| dev->clk = pdata->xtal; |
| dev->ts_mode = pdata->ts_mode; |
| dev->ts_clk = pdata->ts_clock; |
| dev->client[0] = client; |
| dev->regmap[0] = regmap_init_i2c(dev->client[0], ®map_config); |
| if (IS_ERR(dev->regmap[0])) { |
| ret = PTR_ERR(dev->regmap[0]); |
| goto err_kfree; |
| } |
| |
| /* |
| * Chip has three I2C addresses for different register banks. Used |
| * addresses are 0x18, 0x1a and 0x1c. We register two dummy clients, |
| * 0x1a and 0x1c, in order to get own I2C client for each register bank. |
| * |
| * Also, register bank 2 do not support sequential I/O. Only single |
| * register write or read is allowed to that bank. |
| */ |
| dev->client[1] = i2c_new_dummy(client->adapter, 0x1a); |
| if (!dev->client[1]) { |
| ret = -ENODEV; |
| dev_err(&client->dev, "I2C registration failed\n"); |
| if (ret) |
| goto err_regmap_0_regmap_exit; |
| } |
| dev->regmap[1] = regmap_init_i2c(dev->client[1], ®map_config); |
| if (IS_ERR(dev->regmap[1])) { |
| ret = PTR_ERR(dev->regmap[1]); |
| goto err_client_1_i2c_unregister_device; |
| } |
| i2c_set_clientdata(dev->client[1], dev); |
| |
| dev->client[2] = i2c_new_dummy(client->adapter, 0x1c); |
| if (!dev->client[2]) { |
| ret = -ENODEV; |
| dev_err(&client->dev, "2nd I2C registration failed\n"); |
| if (ret) |
| goto err_regmap_1_regmap_exit; |
| } |
| dev->regmap[2] = regmap_init_i2c(dev->client[2], ®map_config); |
| if (IS_ERR(dev->regmap[2])) { |
| ret = PTR_ERR(dev->regmap[2]); |
| goto err_client_2_i2c_unregister_device; |
| } |
| i2c_set_clientdata(dev->client[2], dev); |
| |
| /* Check demod answers with correct chip id */ |
| ret = regmap_read(dev->regmap[2], 0xff, &utmp); |
| if (ret) |
| goto err_regmap_2_regmap_exit; |
| |
| dev_dbg(&client->dev, "chip id=%02x\n", utmp); |
| |
| if (utmp != 0x02) { |
| ret = -ENODEV; |
| goto err_regmap_2_regmap_exit; |
| } |
| |
| /* Sleep because chip is active by default */ |
| ret = regmap_write(dev->regmap[2], 0x05, 0x3e); |
| if (ret) |
| goto err_regmap_2_regmap_exit; |
| |
| /* Create dvb frontend */ |
| memcpy(&dev->fe.ops, &mn88472_ops, sizeof(struct dvb_frontend_ops)); |
| dev->fe.demodulator_priv = client; |
| *pdata->fe = &dev->fe; |
| i2c_set_clientdata(client, dev); |
| |
| /* Setup callbacks */ |
| pdata->get_dvb_frontend = mn88472_get_dvb_frontend; |
| |
| dev_info(&client->dev, "Panasonic MN88472 successfully identified\n"); |
| |
| return 0; |
| err_regmap_2_regmap_exit: |
| regmap_exit(dev->regmap[2]); |
| err_client_2_i2c_unregister_device: |
| i2c_unregister_device(dev->client[2]); |
| err_regmap_1_regmap_exit: |
| regmap_exit(dev->regmap[1]); |
| err_client_1_i2c_unregister_device: |
| i2c_unregister_device(dev->client[1]); |
| err_regmap_0_regmap_exit: |
| regmap_exit(dev->regmap[0]); |
| err_kfree: |
| kfree(dev); |
| err: |
| dev_dbg(&client->dev, "failed=%d\n", ret); |
| return ret; |
| } |
| |
| static int mn88472_remove(struct i2c_client *client) |
| { |
| struct mn88472_dev *dev = i2c_get_clientdata(client); |
| |
| dev_dbg(&client->dev, "\n"); |
| |
| regmap_exit(dev->regmap[2]); |
| i2c_unregister_device(dev->client[2]); |
| |
| regmap_exit(dev->regmap[1]); |
| i2c_unregister_device(dev->client[1]); |
| |
| regmap_exit(dev->regmap[0]); |
| |
| kfree(dev); |
| |
| return 0; |
| } |
| |
| static const struct i2c_device_id mn88472_id_table[] = { |
| {"mn88472", 0}, |
| {} |
| }; |
| MODULE_DEVICE_TABLE(i2c, mn88472_id_table); |
| |
| static struct i2c_driver mn88472_driver = { |
| .driver = { |
| .name = "mn88472", |
| .suppress_bind_attrs = true, |
| }, |
| .probe = mn88472_probe, |
| .remove = mn88472_remove, |
| .id_table = mn88472_id_table, |
| }; |
| |
| module_i2c_driver(mn88472_driver); |
| |
| MODULE_AUTHOR("Antti Palosaari <crope@iki.fi>"); |
| MODULE_DESCRIPTION("Panasonic MN88472 DVB-T/T2/C demodulator driver"); |
| MODULE_LICENSE("GPL"); |
| MODULE_FIRMWARE(MN88472_FIRMWARE); |