| // SPDX-License-Identifier: GPL-2.0 |
| |
| #include <linux/types.h> |
| #include <linux/kconfig.h> |
| #include <linux/list.h> |
| #include <linux/slab.h> |
| #include <linux/security.h> |
| #include <linux/highmem.h> |
| #include <linux/umh.h> |
| #include <linux/sysctl.h> |
| #include <linux/vmalloc.h> |
| |
| #include "fallback.h" |
| #include "firmware.h" |
| |
| /* |
| * firmware fallback mechanism |
| */ |
| |
| extern struct firmware_fallback_config fw_fallback_config; |
| |
| /* These getters are vetted to use int properly */ |
| static inline int __firmware_loading_timeout(void) |
| { |
| return fw_fallback_config.loading_timeout; |
| } |
| |
| /* These setters are vetted to use int properly */ |
| static void __fw_fallback_set_timeout(int timeout) |
| { |
| fw_fallback_config.loading_timeout = timeout; |
| } |
| |
| /* |
| * use small loading timeout for caching devices' firmware because all these |
| * firmware images have been loaded successfully at lease once, also system is |
| * ready for completing firmware loading now. The maximum size of firmware in |
| * current distributions is about 2M bytes, so 10 secs should be enough. |
| */ |
| void fw_fallback_set_cache_timeout(void) |
| { |
| fw_fallback_config.old_timeout = __firmware_loading_timeout(); |
| __fw_fallback_set_timeout(10); |
| } |
| |
| /* Restores the timeout to the value last configured during normal operation */ |
| void fw_fallback_set_default_timeout(void) |
| { |
| __fw_fallback_set_timeout(fw_fallback_config.old_timeout); |
| } |
| |
| static long firmware_loading_timeout(void) |
| { |
| return __firmware_loading_timeout() > 0 ? |
| __firmware_loading_timeout() * HZ : MAX_JIFFY_OFFSET; |
| } |
| |
| static inline bool fw_sysfs_done(struct fw_priv *fw_priv) |
| { |
| return __fw_state_check(fw_priv, FW_STATUS_DONE); |
| } |
| |
| static inline bool fw_sysfs_loading(struct fw_priv *fw_priv) |
| { |
| return __fw_state_check(fw_priv, FW_STATUS_LOADING); |
| } |
| |
| static inline int fw_sysfs_wait_timeout(struct fw_priv *fw_priv, long timeout) |
| { |
| return __fw_state_wait_common(fw_priv, timeout); |
| } |
| |
| struct fw_sysfs { |
| bool nowait; |
| struct device dev; |
| struct fw_priv *fw_priv; |
| struct firmware *fw; |
| }; |
| |
| static struct fw_sysfs *to_fw_sysfs(struct device *dev) |
| { |
| return container_of(dev, struct fw_sysfs, dev); |
| } |
| |
| static void __fw_load_abort(struct fw_priv *fw_priv) |
| { |
| /* |
| * There is a small window in which user can write to 'loading' |
| * between loading done and disappearance of 'loading' |
| */ |
| if (fw_sysfs_done(fw_priv)) |
| return; |
| |
| list_del_init(&fw_priv->pending_list); |
| fw_state_aborted(fw_priv); |
| } |
| |
| static void fw_load_abort(struct fw_sysfs *fw_sysfs) |
| { |
| struct fw_priv *fw_priv = fw_sysfs->fw_priv; |
| |
| __fw_load_abort(fw_priv); |
| } |
| |
| static LIST_HEAD(pending_fw_head); |
| |
| void kill_pending_fw_fallback_reqs(bool only_kill_custom) |
| { |
| struct fw_priv *fw_priv; |
| struct fw_priv *next; |
| |
| mutex_lock(&fw_lock); |
| list_for_each_entry_safe(fw_priv, next, &pending_fw_head, |
| pending_list) { |
| if (!fw_priv->need_uevent || !only_kill_custom) |
| __fw_load_abort(fw_priv); |
| } |
| mutex_unlock(&fw_lock); |
| } |
| |
| static ssize_t timeout_show(struct class *class, struct class_attribute *attr, |
| char *buf) |
| { |
| return sprintf(buf, "%d\n", __firmware_loading_timeout()); |
| } |
| |
| /** |
| * firmware_timeout_store() - set number of seconds to wait for firmware |
| * @class: device class pointer |
| * @attr: device attribute pointer |
| * @buf: buffer to scan for timeout value |
| * @count: number of bytes in @buf |
| * |
| * Sets the number of seconds to wait for the firmware. Once |
| * this expires an error will be returned to the driver and no |
| * firmware will be provided. |
| * |
| * Note: zero means 'wait forever'. |
| **/ |
| static ssize_t timeout_store(struct class *class, struct class_attribute *attr, |
| const char *buf, size_t count) |
| { |
| int tmp_loading_timeout = simple_strtol(buf, NULL, 10); |
| |
| if (tmp_loading_timeout < 0) |
| tmp_loading_timeout = 0; |
| |
| __fw_fallback_set_timeout(tmp_loading_timeout); |
| |
| return count; |
| } |
| static CLASS_ATTR_RW(timeout); |
| |
| static struct attribute *firmware_class_attrs[] = { |
| &class_attr_timeout.attr, |
| NULL, |
| }; |
| ATTRIBUTE_GROUPS(firmware_class); |
| |
| static void fw_dev_release(struct device *dev) |
| { |
| struct fw_sysfs *fw_sysfs = to_fw_sysfs(dev); |
| |
| kfree(fw_sysfs); |
| } |
| |
| static int do_firmware_uevent(struct fw_sysfs *fw_sysfs, struct kobj_uevent_env *env) |
| { |
| if (add_uevent_var(env, "FIRMWARE=%s", fw_sysfs->fw_priv->fw_name)) |
| return -ENOMEM; |
| if (add_uevent_var(env, "TIMEOUT=%i", __firmware_loading_timeout())) |
| return -ENOMEM; |
| if (add_uevent_var(env, "ASYNC=%d", fw_sysfs->nowait)) |
| return -ENOMEM; |
| |
| return 0; |
| } |
| |
| static int firmware_uevent(struct device *dev, struct kobj_uevent_env *env) |
| { |
| struct fw_sysfs *fw_sysfs = to_fw_sysfs(dev); |
| int err = 0; |
| |
| mutex_lock(&fw_lock); |
| if (fw_sysfs->fw_priv) |
| err = do_firmware_uevent(fw_sysfs, env); |
| mutex_unlock(&fw_lock); |
| return err; |
| } |
| |
| static struct class firmware_class = { |
| .name = "firmware", |
| .class_groups = firmware_class_groups, |
| .dev_uevent = firmware_uevent, |
| .dev_release = fw_dev_release, |
| }; |
| |
| int register_sysfs_loader(void) |
| { |
| return class_register(&firmware_class); |
| } |
| |
| void unregister_sysfs_loader(void) |
| { |
| class_unregister(&firmware_class); |
| } |
| |
| static ssize_t firmware_loading_show(struct device *dev, |
| struct device_attribute *attr, char *buf) |
| { |
| struct fw_sysfs *fw_sysfs = to_fw_sysfs(dev); |
| int loading = 0; |
| |
| mutex_lock(&fw_lock); |
| if (fw_sysfs->fw_priv) |
| loading = fw_sysfs_loading(fw_sysfs->fw_priv); |
| mutex_unlock(&fw_lock); |
| |
| return sprintf(buf, "%d\n", loading); |
| } |
| |
| /** |
| * firmware_loading_store() - set value in the 'loading' control file |
| * @dev: device pointer |
| * @attr: device attribute pointer |
| * @buf: buffer to scan for loading control value |
| * @count: number of bytes in @buf |
| * |
| * The relevant values are: |
| * |
| * 1: Start a load, discarding any previous partial load. |
| * 0: Conclude the load and hand the data to the driver code. |
| * -1: Conclude the load with an error and discard any written data. |
| **/ |
| static ssize_t firmware_loading_store(struct device *dev, |
| struct device_attribute *attr, |
| const char *buf, size_t count) |
| { |
| struct fw_sysfs *fw_sysfs = to_fw_sysfs(dev); |
| struct fw_priv *fw_priv; |
| ssize_t written = count; |
| int loading = simple_strtol(buf, NULL, 10); |
| |
| mutex_lock(&fw_lock); |
| fw_priv = fw_sysfs->fw_priv; |
| if (fw_state_is_aborted(fw_priv)) |
| goto out; |
| |
| switch (loading) { |
| case 1: |
| /* discarding any previous partial load */ |
| if (!fw_sysfs_done(fw_priv)) { |
| fw_free_paged_buf(fw_priv); |
| fw_state_start(fw_priv); |
| } |
| break; |
| case 0: |
| if (fw_sysfs_loading(fw_priv)) { |
| int rc; |
| |
| /* |
| * Several loading requests may be pending on |
| * one same firmware buf, so let all requests |
| * see the mapped 'buf->data' once the loading |
| * is completed. |
| * */ |
| rc = fw_map_paged_buf(fw_priv); |
| if (rc) |
| dev_err(dev, "%s: map pages failed\n", |
| __func__); |
| else |
| rc = security_kernel_post_read_file(NULL, |
| fw_priv->data, fw_priv->size, |
| READING_FIRMWARE); |
| |
| /* |
| * Same logic as fw_load_abort, only the DONE bit |
| * is ignored and we set ABORT only on failure. |
| */ |
| list_del_init(&fw_priv->pending_list); |
| if (rc) { |
| fw_state_aborted(fw_priv); |
| written = rc; |
| } else { |
| fw_state_done(fw_priv); |
| } |
| break; |
| } |
| /* fallthrough */ |
| default: |
| dev_err(dev, "%s: unexpected value (%d)\n", __func__, loading); |
| /* fallthrough */ |
| case -1: |
| fw_load_abort(fw_sysfs); |
| break; |
| } |
| out: |
| mutex_unlock(&fw_lock); |
| return written; |
| } |
| |
| static DEVICE_ATTR(loading, 0644, firmware_loading_show, firmware_loading_store); |
| |
| static void firmware_rw_data(struct fw_priv *fw_priv, char *buffer, |
| loff_t offset, size_t count, bool read) |
| { |
| if (read) |
| memcpy(buffer, fw_priv->data + offset, count); |
| else |
| memcpy(fw_priv->data + offset, buffer, count); |
| } |
| |
| static void firmware_rw(struct fw_priv *fw_priv, char *buffer, |
| loff_t offset, size_t count, bool read) |
| { |
| while (count) { |
| void *page_data; |
| int page_nr = offset >> PAGE_SHIFT; |
| int page_ofs = offset & (PAGE_SIZE-1); |
| int page_cnt = min_t(size_t, PAGE_SIZE - page_ofs, count); |
| |
| page_data = kmap(fw_priv->pages[page_nr]); |
| |
| if (read) |
| memcpy(buffer, page_data + page_ofs, page_cnt); |
| else |
| memcpy(page_data + page_ofs, buffer, page_cnt); |
| |
| kunmap(fw_priv->pages[page_nr]); |
| buffer += page_cnt; |
| offset += page_cnt; |
| count -= page_cnt; |
| } |
| } |
| |
| static ssize_t firmware_data_read(struct file *filp, struct kobject *kobj, |
| struct bin_attribute *bin_attr, |
| char *buffer, loff_t offset, size_t count) |
| { |
| struct device *dev = kobj_to_dev(kobj); |
| struct fw_sysfs *fw_sysfs = to_fw_sysfs(dev); |
| struct fw_priv *fw_priv; |
| ssize_t ret_count; |
| |
| mutex_lock(&fw_lock); |
| fw_priv = fw_sysfs->fw_priv; |
| if (!fw_priv || fw_sysfs_done(fw_priv)) { |
| ret_count = -ENODEV; |
| goto out; |
| } |
| if (offset > fw_priv->size) { |
| ret_count = 0; |
| goto out; |
| } |
| if (count > fw_priv->size - offset) |
| count = fw_priv->size - offset; |
| |
| ret_count = count; |
| |
| if (fw_priv->data) |
| firmware_rw_data(fw_priv, buffer, offset, count, true); |
| else |
| firmware_rw(fw_priv, buffer, offset, count, true); |
| |
| out: |
| mutex_unlock(&fw_lock); |
| return ret_count; |
| } |
| |
| static int fw_realloc_pages(struct fw_sysfs *fw_sysfs, int min_size) |
| { |
| int err; |
| |
| err = fw_grow_paged_buf(fw_sysfs->fw_priv, |
| PAGE_ALIGN(min_size) >> PAGE_SHIFT); |
| if (err) |
| fw_load_abort(fw_sysfs); |
| return err; |
| } |
| |
| /** |
| * firmware_data_write() - write method for firmware |
| * @filp: open sysfs file |
| * @kobj: kobject for the device |
| * @bin_attr: bin_attr structure |
| * @buffer: buffer being written |
| * @offset: buffer offset for write in total data store area |
| * @count: buffer size |
| * |
| * Data written to the 'data' attribute will be later handed to |
| * the driver as a firmware image. |
| **/ |
| static ssize_t firmware_data_write(struct file *filp, struct kobject *kobj, |
| struct bin_attribute *bin_attr, |
| char *buffer, loff_t offset, size_t count) |
| { |
| struct device *dev = kobj_to_dev(kobj); |
| struct fw_sysfs *fw_sysfs = to_fw_sysfs(dev); |
| struct fw_priv *fw_priv; |
| ssize_t retval; |
| |
| if (!capable(CAP_SYS_RAWIO)) |
| return -EPERM; |
| |
| mutex_lock(&fw_lock); |
| fw_priv = fw_sysfs->fw_priv; |
| if (!fw_priv || fw_sysfs_done(fw_priv)) { |
| retval = -ENODEV; |
| goto out; |
| } |
| |
| if (fw_priv->data) { |
| if (offset + count > fw_priv->allocated_size) { |
| retval = -ENOMEM; |
| goto out; |
| } |
| firmware_rw_data(fw_priv, buffer, offset, count, false); |
| retval = count; |
| } else { |
| retval = fw_realloc_pages(fw_sysfs, offset + count); |
| if (retval) |
| goto out; |
| |
| retval = count; |
| firmware_rw(fw_priv, buffer, offset, count, false); |
| } |
| |
| fw_priv->size = max_t(size_t, offset + count, fw_priv->size); |
| out: |
| mutex_unlock(&fw_lock); |
| return retval; |
| } |
| |
| static struct bin_attribute firmware_attr_data = { |
| .attr = { .name = "data", .mode = 0644 }, |
| .size = 0, |
| .read = firmware_data_read, |
| .write = firmware_data_write, |
| }; |
| |
| static struct attribute *fw_dev_attrs[] = { |
| &dev_attr_loading.attr, |
| NULL |
| }; |
| |
| static struct bin_attribute *fw_dev_bin_attrs[] = { |
| &firmware_attr_data, |
| NULL |
| }; |
| |
| static const struct attribute_group fw_dev_attr_group = { |
| .attrs = fw_dev_attrs, |
| .bin_attrs = fw_dev_bin_attrs, |
| }; |
| |
| static const struct attribute_group *fw_dev_attr_groups[] = { |
| &fw_dev_attr_group, |
| NULL |
| }; |
| |
| static struct fw_sysfs * |
| fw_create_instance(struct firmware *firmware, const char *fw_name, |
| struct device *device, enum fw_opt opt_flags) |
| { |
| struct fw_sysfs *fw_sysfs; |
| struct device *f_dev; |
| |
| fw_sysfs = kzalloc(sizeof(*fw_sysfs), GFP_KERNEL); |
| if (!fw_sysfs) { |
| fw_sysfs = ERR_PTR(-ENOMEM); |
| goto exit; |
| } |
| |
| fw_sysfs->nowait = !!(opt_flags & FW_OPT_NOWAIT); |
| fw_sysfs->fw = firmware; |
| f_dev = &fw_sysfs->dev; |
| |
| device_initialize(f_dev); |
| dev_set_name(f_dev, "%s", fw_name); |
| f_dev->parent = device; |
| f_dev->class = &firmware_class; |
| f_dev->groups = fw_dev_attr_groups; |
| exit: |
| return fw_sysfs; |
| } |
| |
| /** |
| * fw_load_sysfs_fallback() - load a firmware via the sysfs fallback mechanism |
| * @fw_sysfs: firmware sysfs information for the firmware to load |
| * @opt_flags: flags of options, FW_OPT_* |
| * @timeout: timeout to wait for the load |
| * |
| * In charge of constructing a sysfs fallback interface for firmware loading. |
| **/ |
| static int fw_load_sysfs_fallback(struct fw_sysfs *fw_sysfs, |
| enum fw_opt opt_flags, long timeout) |
| { |
| int retval = 0; |
| struct device *f_dev = &fw_sysfs->dev; |
| struct fw_priv *fw_priv = fw_sysfs->fw_priv; |
| |
| /* fall back on userspace loading */ |
| if (!fw_priv->data) |
| fw_priv->is_paged_buf = true; |
| |
| dev_set_uevent_suppress(f_dev, true); |
| |
| retval = device_add(f_dev); |
| if (retval) { |
| dev_err(f_dev, "%s: device_register failed\n", __func__); |
| goto err_put_dev; |
| } |
| |
| mutex_lock(&fw_lock); |
| list_add(&fw_priv->pending_list, &pending_fw_head); |
| mutex_unlock(&fw_lock); |
| |
| if (opt_flags & FW_OPT_UEVENT) { |
| fw_priv->need_uevent = true; |
| dev_set_uevent_suppress(f_dev, false); |
| dev_dbg(f_dev, "firmware: requesting %s\n", fw_priv->fw_name); |
| kobject_uevent(&fw_sysfs->dev.kobj, KOBJ_ADD); |
| } else { |
| timeout = MAX_JIFFY_OFFSET; |
| } |
| |
| retval = fw_sysfs_wait_timeout(fw_priv, timeout); |
| if (retval < 0 && retval != -ENOENT) { |
| mutex_lock(&fw_lock); |
| fw_load_abort(fw_sysfs); |
| mutex_unlock(&fw_lock); |
| } |
| |
| if (fw_state_is_aborted(fw_priv)) { |
| if (retval == -ERESTARTSYS) |
| retval = -EINTR; |
| else |
| retval = -EAGAIN; |
| } else if (fw_priv->is_paged_buf && !fw_priv->data) |
| retval = -ENOMEM; |
| |
| device_del(f_dev); |
| err_put_dev: |
| put_device(f_dev); |
| return retval; |
| } |
| |
| static int fw_load_from_user_helper(struct firmware *firmware, |
| const char *name, struct device *device, |
| enum fw_opt opt_flags) |
| { |
| struct fw_sysfs *fw_sysfs; |
| long timeout; |
| int ret; |
| |
| timeout = firmware_loading_timeout(); |
| if (opt_flags & FW_OPT_NOWAIT) { |
| timeout = usermodehelper_read_lock_wait(timeout); |
| if (!timeout) { |
| dev_dbg(device, "firmware: %s loading timed out\n", |
| name); |
| return -EBUSY; |
| } |
| } else { |
| ret = usermodehelper_read_trylock(); |
| if (WARN_ON(ret)) { |
| dev_err(device, "firmware: %s will not be loaded\n", |
| name); |
| return ret; |
| } |
| } |
| |
| fw_sysfs = fw_create_instance(firmware, name, device, opt_flags); |
| if (IS_ERR(fw_sysfs)) { |
| ret = PTR_ERR(fw_sysfs); |
| goto out_unlock; |
| } |
| |
| fw_sysfs->fw_priv = firmware->priv; |
| ret = fw_load_sysfs_fallback(fw_sysfs, opt_flags, timeout); |
| |
| if (!ret) |
| ret = assign_fw(firmware, device, opt_flags); |
| |
| out_unlock: |
| usermodehelper_read_unlock(); |
| |
| return ret; |
| } |
| |
| static bool fw_force_sysfs_fallback(enum fw_opt opt_flags) |
| { |
| if (fw_fallback_config.force_sysfs_fallback) |
| return true; |
| if (!(opt_flags & FW_OPT_USERHELPER)) |
| return false; |
| return true; |
| } |
| |
| static bool fw_run_sysfs_fallback(enum fw_opt opt_flags) |
| { |
| int ret; |
| |
| if (fw_fallback_config.ignore_sysfs_fallback) { |
| pr_info_once("Ignoring firmware sysfs fallback due to sysctl knob\n"); |
| return false; |
| } |
| |
| if ((opt_flags & FW_OPT_NOFALLBACK_SYSFS)) |
| return false; |
| |
| /* Also permit LSMs and IMA to fail firmware sysfs fallback */ |
| ret = security_kernel_load_data(LOADING_FIRMWARE); |
| if (ret < 0) |
| return false; |
| |
| return fw_force_sysfs_fallback(opt_flags); |
| } |
| |
| /** |
| * firmware_fallback_sysfs() - use the fallback mechanism to find firmware |
| * @fw: pointer to firmware image |
| * @name: name of firmware file to look for |
| * @device: device for which firmware is being loaded |
| * @opt_flags: options to control firmware loading behaviour |
| * @ret: return value from direct lookup which triggered the fallback mechanism |
| * |
| * This function is called if direct lookup for the firmware failed, it enables |
| * a fallback mechanism through userspace by exposing a sysfs loading |
| * interface. Userspace is in charge of loading the firmware through the sysfs |
| * loading interface. This sysfs fallback mechanism may be disabled completely |
| * on a system by setting the proc sysctl value ignore_sysfs_fallback to true. |
| * If this is false we check if the internal API caller set the |
| * @FW_OPT_NOFALLBACK_SYSFS flag, if so it would also disable the fallback |
| * mechanism. A system may want to enforce the sysfs fallback mechanism at all |
| * times, it can do this by setting ignore_sysfs_fallback to false and |
| * force_sysfs_fallback to true. |
| * Enabling force_sysfs_fallback is functionally equivalent to build a kernel |
| * with CONFIG_FW_LOADER_USER_HELPER_FALLBACK. |
| **/ |
| int firmware_fallback_sysfs(struct firmware *fw, const char *name, |
| struct device *device, |
| enum fw_opt opt_flags, |
| int ret) |
| { |
| if (!fw_run_sysfs_fallback(opt_flags)) |
| return ret; |
| |
| if (!(opt_flags & FW_OPT_NO_WARN)) |
| dev_warn(device, "Falling back to sysfs fallback for: %s\n", |
| name); |
| else |
| dev_dbg(device, "Falling back to sysfs fallback for: %s\n", |
| name); |
| return fw_load_from_user_helper(fw, name, device, opt_flags); |
| } |