| // SPDX-License-Identifier: GPL-2.0-or-later |
| /****************************************************************************** |
| * |
| * (C)Copyright 1998,1999 SysKonnect, |
| * a business unit of Schneider & Koch & Co. Datensysteme GmbH. |
| * |
| * See the file "skfddi.c" for further information. |
| * |
| * The information in this file is provided "AS IS" without warranty. |
| * |
| ******************************************************************************/ |
| |
| /* |
| * ******************************************************************* |
| * This SBA code implements the Synchronous Bandwidth Allocation |
| * functions described in the "FDDI Synchronous Forum Implementer's |
| * Agreement" dated December 1th, 1993. |
| * ******************************************************************* |
| * |
| * PURPOSE: The purpose of this function is to control |
| * synchronous allocations on a single FDDI segment. |
| * Allocations are limited to the primary FDDI ring. |
| * The SBM provides recovery mechanisms to recover |
| * unused bandwidth also resolves T_Neg and |
| * reconfiguration changes. Many of the SBM state |
| * machine inputs are sourced by the underlying |
| * FDDI sub-system supporting the SBA application. |
| * |
| * ******************************************************************* |
| */ |
| |
| #include "h/types.h" |
| #include "h/fddi.h" |
| #include "h/smc.h" |
| #include "h/smt_p.h" |
| |
| |
| #ifndef SLIM_SMT |
| |
| #ifdef ESS |
| |
| #ifndef lint |
| static const char ID_sccs[] = "@(#)ess.c 1.10 96/02/23 (C) SK" ; |
| #define LINT_USE(x) |
| #else |
| #define LINT_USE(x) (x)=(x) |
| #endif |
| #define MS2BCLK(x) ((x)*12500L) |
| |
| /* |
| ------------------------------------------------------------- |
| LOCAL VARIABLES: |
| ------------------------------------------------------------- |
| */ |
| |
| static const u_short plist_raf_alc_res[] = { SMT_P0012, SMT_P320B, SMT_P320F, |
| SMT_P3210, SMT_P0019, SMT_P001A, |
| SMT_P001D, 0 } ; |
| |
| static const u_short plist_raf_chg_req[] = { SMT_P320B, SMT_P320F, SMT_P3210, |
| SMT_P001A, 0 } ; |
| |
| static const struct fddi_addr smt_sba_da = {{0x80,0x01,0x43,0x00,0x80,0x0C}} ; |
| static const struct fddi_addr null_addr = {{0,0,0,0,0,0}} ; |
| |
| /* |
| ------------------------------------------------------------- |
| GLOBAL VARIABLES: |
| ------------------------------------------------------------- |
| */ |
| |
| |
| /* |
| ------------------------------------------------------------- |
| LOCAL FUNCTIONS: |
| ------------------------------------------------------------- |
| */ |
| |
| static void ess_send_response(struct s_smc *smc, struct smt_header *sm, |
| int sba_cmd); |
| static void ess_config_fifo(struct s_smc *smc); |
| static void ess_send_alc_req(struct s_smc *smc); |
| static void ess_send_frame(struct s_smc *smc, SMbuf *mb); |
| |
| /* |
| ------------------------------------------------------------- |
| EXTERNAL FUNCTIONS: |
| ------------------------------------------------------------- |
| */ |
| |
| /* |
| ------------------------------------------------------------- |
| PUBLIC FUNCTIONS: |
| ------------------------------------------------------------- |
| */ |
| |
| void ess_timer_poll(struct s_smc *smc); |
| void ess_para_change(struct s_smc *smc); |
| int ess_raf_received_pack(struct s_smc *smc, SMbuf *mb, struct smt_header *sm, |
| int fs); |
| static int process_bw_alloc(struct s_smc *smc, long int payload, long int overhead); |
| |
| |
| /* |
| * -------------------------------------------------------------------------- |
| * End Station Support (ESS) |
| * -------------------------------------------------------------------------- |
| */ |
| |
| /* |
| * evaluate the RAF frame |
| */ |
| int ess_raf_received_pack(struct s_smc *smc, SMbuf *mb, struct smt_header *sm, |
| int fs) |
| { |
| void *p ; /* universal pointer */ |
| struct smt_p_0016 *cmd ; /* para: command for the ESS */ |
| SMbuf *db ; |
| u_long msg_res_type ; /* recource type */ |
| u_long payload, overhead ; |
| int local ; |
| int i ; |
| |
| /* |
| * Message Processing Code |
| */ |
| local = ((fs & L_INDICATOR) != 0) ; |
| |
| /* |
| * get the resource type |
| */ |
| if (!(p = (void *) sm_to_para(smc,sm,SMT_P0015))) { |
| DB_ESS("ESS: RAF frame error, parameter type not found"); |
| return fs; |
| } |
| msg_res_type = ((struct smt_p_0015 *)p)->res_type ; |
| |
| /* |
| * get the pointer to the ESS command |
| */ |
| if (!(cmd = (struct smt_p_0016 *) sm_to_para(smc,sm,SMT_P0016))) { |
| /* |
| * error in frame: para ESS command was not found |
| */ |
| DB_ESS("ESS: RAF frame error, parameter command not found"); |
| return fs; |
| } |
| |
| DB_ESSN(2, "fc %x ft %x", sm->smt_class, sm->smt_type); |
| DB_ESSN(2, "ver %x tran %x", sm->smt_version, sm->smt_tid); |
| DB_ESSN(2, "stn_id %pM", &sm->smt_source); |
| |
| DB_ESSN(2, "infolen %x res %lx", sm->smt_len, msg_res_type); |
| DB_ESSN(2, "sbacmd %x", cmd->sba_cmd); |
| |
| /* |
| * evaluate the ESS command |
| */ |
| switch (cmd->sba_cmd) { |
| |
| /* |
| * Process an ESS Allocation Request |
| */ |
| case REQUEST_ALLOCATION : |
| /* |
| * check for an RAF Request (Allocation Request) |
| */ |
| if (sm->smt_type == SMT_REQUEST) { |
| /* |
| * process the Allocation request only if the frame is |
| * local and no static allocation is used |
| */ |
| if (!local || smc->mib.fddiESSPayload) |
| return fs; |
| |
| p = (void *) sm_to_para(smc,sm,SMT_P0019) ; |
| for (i = 0; i < 5; i++) { |
| if (((struct smt_p_0019 *)p)->alloc_addr.a[i]) { |
| return fs; |
| } |
| } |
| |
| /* |
| * Note: The Application should send a LAN_LOC_FRAME. |
| * The ESS do not send the Frame to the network! |
| */ |
| smc->ess.alloc_trans_id = sm->smt_tid ; |
| DB_ESS("ESS: save Alloc Req Trans ID %x", sm->smt_tid); |
| p = (void *) sm_to_para(smc,sm,SMT_P320F) ; |
| ((struct smt_p_320f *)p)->mib_payload = |
| smc->mib.a[PATH0].fddiPATHSbaPayload ; |
| p = (void *) sm_to_para(smc,sm,SMT_P3210) ; |
| ((struct smt_p_3210 *)p)->mib_overhead = |
| smc->mib.a[PATH0].fddiPATHSbaOverhead ; |
| sm->smt_dest = smt_sba_da ; |
| |
| if (smc->ess.local_sba_active) |
| return fs | I_INDICATOR; |
| |
| if (!(db = smt_get_mbuf(smc))) |
| return fs; |
| |
| db->sm_len = mb->sm_len ; |
| db->sm_off = mb->sm_off ; |
| memcpy(((char *)(db->sm_data+db->sm_off)),(char *)sm, |
| (int)db->sm_len) ; |
| dump_smt(smc, |
| (struct smt_header *)(db->sm_data+db->sm_off), |
| "RAF") ; |
| smt_send_frame(smc,db,FC_SMT_INFO,0) ; |
| return fs; |
| } |
| |
| /* |
| * The RAF frame is an Allocation Response ! |
| * check the parameters |
| */ |
| if (smt_check_para(smc,sm,plist_raf_alc_res)) { |
| DB_ESS("ESS: RAF with para problem, ignoring"); |
| return fs; |
| } |
| |
| /* |
| * VERIFY THE FRAME IS WELL BUILT: |
| * |
| * 1. path index = primary ring only |
| * 2. resource type = sync bw only |
| * 3. trans action id = alloc_trans_id |
| * 4. reason code = success |
| * |
| * If any are violated, discard the RAF frame |
| */ |
| if ((((struct smt_p_320b *)sm_to_para(smc,sm,SMT_P320B))->path_index |
| != PRIMARY_RING) || |
| (msg_res_type != SYNC_BW) || |
| (((struct smt_p_reason *)sm_to_para(smc,sm,SMT_P0012))->rdf_reason |
| != SMT_RDF_SUCCESS) || |
| (sm->smt_tid != smc->ess.alloc_trans_id)) { |
| |
| DB_ESS("ESS: Allocation Response not accepted"); |
| return fs; |
| } |
| |
| /* |
| * Extract message parameters |
| */ |
| p = (void *) sm_to_para(smc,sm,SMT_P320F) ; |
| if (!p) { |
| printk(KERN_ERR "ESS: sm_to_para failed"); |
| return fs; |
| } |
| payload = ((struct smt_p_320f *)p)->mib_payload ; |
| p = (void *) sm_to_para(smc,sm,SMT_P3210) ; |
| if (!p) { |
| printk(KERN_ERR "ESS: sm_to_para failed"); |
| return fs; |
| } |
| overhead = ((struct smt_p_3210 *)p)->mib_overhead ; |
| |
| DB_ESSN(2, "payload= %lx overhead= %lx", |
| payload, overhead); |
| |
| /* |
| * process the bandwidth allocation |
| */ |
| (void)process_bw_alloc(smc,(long)payload,(long)overhead) ; |
| |
| return fs; |
| /* end of Process Allocation Request */ |
| |
| /* |
| * Process an ESS Change Request |
| */ |
| case CHANGE_ALLOCATION : |
| /* |
| * except only replies |
| */ |
| if (sm->smt_type != SMT_REQUEST) { |
| DB_ESS("ESS: Do not process Change Responses"); |
| return fs; |
| } |
| |
| /* |
| * check the para for the Change Request |
| */ |
| if (smt_check_para(smc,sm,plist_raf_chg_req)) { |
| DB_ESS("ESS: RAF with para problem, ignoring"); |
| return fs; |
| } |
| |
| /* |
| * Verify the path index and resource |
| * type are correct. If any of |
| * these are false, don't process this |
| * change request frame. |
| */ |
| if ((((struct smt_p_320b *)sm_to_para(smc,sm,SMT_P320B))->path_index |
| != PRIMARY_RING) || (msg_res_type != SYNC_BW)) { |
| DB_ESS("ESS: RAF frame with para problem, ignoring"); |
| return fs; |
| } |
| |
| /* |
| * Extract message queue parameters |
| */ |
| p = (void *) sm_to_para(smc,sm,SMT_P320F) ; |
| payload = ((struct smt_p_320f *)p)->mib_payload ; |
| p = (void *) sm_to_para(smc,sm,SMT_P3210) ; |
| overhead = ((struct smt_p_3210 *)p)->mib_overhead ; |
| |
| DB_ESSN(2, "ESS: Change Request from %pM", |
| &sm->smt_source); |
| DB_ESSN(2, "payload= %lx overhead= %lx", |
| payload, overhead); |
| |
| /* |
| * process the bandwidth allocation |
| */ |
| if(!process_bw_alloc(smc,(long)payload,(long)overhead)) |
| return fs; |
| |
| /* |
| * send an RAF Change Reply |
| */ |
| ess_send_response(smc,sm,CHANGE_ALLOCATION) ; |
| |
| return fs; |
| /* end of Process Change Request */ |
| |
| /* |
| * Process Report Response |
| */ |
| case REPORT_ALLOCATION : |
| /* |
| * except only requests |
| */ |
| if (sm->smt_type != SMT_REQUEST) { |
| DB_ESS("ESS: Do not process a Report Reply"); |
| return fs; |
| } |
| |
| DB_ESSN(2, "ESS: Report Request from %pM", |
| &sm->smt_source); |
| |
| /* |
| * verify that the resource type is sync bw only |
| */ |
| if (msg_res_type != SYNC_BW) { |
| DB_ESS("ESS: ignoring RAF with para problem"); |
| return fs; |
| } |
| |
| /* |
| * send an RAF Change Reply |
| */ |
| ess_send_response(smc,sm,REPORT_ALLOCATION) ; |
| |
| return fs; |
| /* end of Process Report Request */ |
| |
| default: |
| /* |
| * error in frame |
| */ |
| DB_ESS("ESS: ignoring RAF with bad sba_cmd"); |
| break ; |
| } |
| |
| return fs; |
| } |
| |
| /* |
| * determines the synchronous bandwidth, set the TSYNC register and the |
| * mib variables SBAPayload, SBAOverhead and fddiMACT-NEG. |
| */ |
| static int process_bw_alloc(struct s_smc *smc, long int payload, long int overhead) |
| { |
| /* |
| * determine the synchronous bandwidth (sync_bw) in bytes per T-NEG, |
| * if the payload is greater than zero. |
| * For the SBAPayload and the SBAOverhead we have the following |
| * unite quations |
| * _ _ |
| * | bytes | |
| * SBAPayload = | 8000 ------ | |
| * | s | |
| * - - |
| * _ _ |
| * | bytes | |
| * SBAOverhead = | ------ | |
| * | T-NEG | |
| * - - |
| * |
| * T-NEG is described by the equation: |
| * |
| * (-) fddiMACT-NEG |
| * T-NEG = ------------------- |
| * 12500000 1/s |
| * |
| * The number of bytes we are able to send is the payload |
| * plus the overhead. |
| * |
| * bytes T-NEG SBAPayload 8000 bytes/s |
| * sync_bw = SBAOverhead ------ + ----------------------------- |
| * T-NEG T-NEG |
| * |
| * |
| * 1 |
| * sync_bw = SBAOverhead + ---- (-)fddiMACT-NEG * SBAPayload |
| * 1562 |
| * |
| */ |
| |
| /* |
| * set the mib attributes fddiPATHSbaOverhead, fddiPATHSbaPayload |
| */ |
| /* if (smt_set_obj(smc,SMT_P320F,payload,S_SET)) { |
| DB_ESS("ESS: SMT does not accept the payload value"); |
| return FALSE; |
| } |
| if (smt_set_obj(smc,SMT_P3210,overhead,S_SET)) { |
| DB_ESS("ESS: SMT does not accept the overhead value"); |
| return FALSE; |
| } */ |
| |
| /* premliminary */ |
| if (payload > MAX_PAYLOAD || overhead > 5000) { |
| DB_ESS("ESS: payload / overhead not accepted"); |
| return FALSE; |
| } |
| |
| /* |
| * start the iterative allocation process if the payload or the overhead |
| * are smaller than the parsed values |
| */ |
| if (smc->mib.fddiESSPayload && |
| ((u_long)payload != smc->mib.fddiESSPayload || |
| (u_long)overhead != smc->mib.fddiESSOverhead)) { |
| smc->ess.raf_act_timer_poll = TRUE ; |
| smc->ess.timer_count = 0 ; |
| } |
| |
| /* |
| * evulate the Payload |
| */ |
| if (payload) { |
| DB_ESSN(2, "ESS: turn SMT_ST_SYNC_SERVICE bit on"); |
| smc->ess.sync_bw_available = TRUE ; |
| |
| smc->ess.sync_bw = overhead - |
| (long)smc->mib.m[MAC0].fddiMACT_Neg * |
| payload / 1562 ; |
| } |
| else { |
| DB_ESSN(2, "ESS: turn SMT_ST_SYNC_SERVICE bit off"); |
| smc->ess.sync_bw_available = FALSE ; |
| smc->ess.sync_bw = 0 ; |
| overhead = 0 ; |
| } |
| |
| smc->mib.a[PATH0].fddiPATHSbaPayload = payload ; |
| smc->mib.a[PATH0].fddiPATHSbaOverhead = overhead ; |
| |
| |
| DB_ESSN(2, "tsync = %lx", smc->ess.sync_bw); |
| |
| ess_config_fifo(smc) ; |
| set_formac_tsync(smc,smc->ess.sync_bw) ; |
| return TRUE; |
| } |
| |
| static void ess_send_response(struct s_smc *smc, struct smt_header *sm, |
| int sba_cmd) |
| { |
| struct smt_sba_chg *chg ; |
| SMbuf *mb ; |
| void *p ; |
| |
| /* |
| * get and initialize the response frame |
| */ |
| if (sba_cmd == CHANGE_ALLOCATION) { |
| if (!(mb=smt_build_frame(smc,SMT_RAF,SMT_REPLY, |
| sizeof(struct smt_sba_chg)))) |
| return ; |
| } |
| else { |
| if (!(mb=smt_build_frame(smc,SMT_RAF,SMT_REPLY, |
| sizeof(struct smt_sba_rep_res)))) |
| return ; |
| } |
| |
| chg = smtod(mb,struct smt_sba_chg *) ; |
| chg->smt.smt_tid = sm->smt_tid ; |
| chg->smt.smt_dest = sm->smt_source ; |
| |
| /* set P15 */ |
| chg->s_type.para.p_type = SMT_P0015 ; |
| chg->s_type.para.p_len = sizeof(struct smt_p_0015) - PARA_LEN ; |
| chg->s_type.res_type = SYNC_BW ; |
| |
| /* set P16 */ |
| chg->cmd.para.p_type = SMT_P0016 ; |
| chg->cmd.para.p_len = sizeof(struct smt_p_0016) - PARA_LEN ; |
| chg->cmd.sba_cmd = sba_cmd ; |
| |
| /* set P320B */ |
| chg->path.para.p_type = SMT_P320B ; |
| chg->path.para.p_len = sizeof(struct smt_p_320b) - PARA_LEN ; |
| chg->path.mib_index = SBAPATHINDEX ; |
| chg->path.path_pad = 0; |
| chg->path.path_index = PRIMARY_RING ; |
| |
| /* set P320F */ |
| chg->payload.para.p_type = SMT_P320F ; |
| chg->payload.para.p_len = sizeof(struct smt_p_320f) - PARA_LEN ; |
| chg->payload.mib_index = SBAPATHINDEX ; |
| chg->payload.mib_payload = smc->mib.a[PATH0].fddiPATHSbaPayload ; |
| |
| /* set P3210 */ |
| chg->overhead.para.p_type = SMT_P3210 ; |
| chg->overhead.para.p_len = sizeof(struct smt_p_3210) - PARA_LEN ; |
| chg->overhead.mib_index = SBAPATHINDEX ; |
| chg->overhead.mib_overhead = smc->mib.a[PATH0].fddiPATHSbaOverhead ; |
| |
| if (sba_cmd == CHANGE_ALLOCATION) { |
| /* set P1A */ |
| chg->cat.para.p_type = SMT_P001A ; |
| chg->cat.para.p_len = sizeof(struct smt_p_001a) - PARA_LEN ; |
| p = (void *) sm_to_para(smc,sm,SMT_P001A) ; |
| chg->cat.category = ((struct smt_p_001a *)p)->category ; |
| } |
| dump_smt(smc,(struct smt_header *)chg,"RAF") ; |
| ess_send_frame(smc,mb) ; |
| } |
| |
| void ess_timer_poll(struct s_smc *smc) |
| { |
| if (!smc->ess.raf_act_timer_poll) |
| return ; |
| |
| DB_ESSN(2, "ESS: timer_poll"); |
| |
| smc->ess.timer_count++ ; |
| if (smc->ess.timer_count == 10) { |
| smc->ess.timer_count = 0 ; |
| ess_send_alc_req(smc) ; |
| } |
| } |
| |
| static void ess_send_alc_req(struct s_smc *smc) |
| { |
| struct smt_sba_alc_req *req ; |
| SMbuf *mb ; |
| |
| /* |
| * send never allocation request where the requested payload and |
| * overhead is zero or deallocate bandwidth when no bandwidth is |
| * parsed |
| */ |
| if (!smc->mib.fddiESSPayload) { |
| smc->mib.fddiESSOverhead = 0 ; |
| } |
| else { |
| if (!smc->mib.fddiESSOverhead) |
| smc->mib.fddiESSOverhead = DEFAULT_OV ; |
| } |
| |
| if (smc->mib.fddiESSOverhead == |
| smc->mib.a[PATH0].fddiPATHSbaOverhead && |
| smc->mib.fddiESSPayload == |
| smc->mib.a[PATH0].fddiPATHSbaPayload){ |
| smc->ess.raf_act_timer_poll = FALSE ; |
| smc->ess.timer_count = 7 ; /* next RAF alc req after 3 s */ |
| return ; |
| } |
| |
| /* |
| * get and initialize the response frame |
| */ |
| if (!(mb=smt_build_frame(smc,SMT_RAF,SMT_REQUEST, |
| sizeof(struct smt_sba_alc_req)))) |
| return ; |
| req = smtod(mb,struct smt_sba_alc_req *) ; |
| req->smt.smt_tid = smc->ess.alloc_trans_id = smt_get_tid(smc) ; |
| req->smt.smt_dest = smt_sba_da ; |
| |
| /* set P15 */ |
| req->s_type.para.p_type = SMT_P0015 ; |
| req->s_type.para.p_len = sizeof(struct smt_p_0015) - PARA_LEN ; |
| req->s_type.res_type = SYNC_BW ; |
| |
| /* set P16 */ |
| req->cmd.para.p_type = SMT_P0016 ; |
| req->cmd.para.p_len = sizeof(struct smt_p_0016) - PARA_LEN ; |
| req->cmd.sba_cmd = REQUEST_ALLOCATION ; |
| |
| /* |
| * set the parameter type and parameter length of all used |
| * parameters |
| */ |
| |
| /* set P320B */ |
| req->path.para.p_type = SMT_P320B ; |
| req->path.para.p_len = sizeof(struct smt_p_320b) - PARA_LEN ; |
| req->path.mib_index = SBAPATHINDEX ; |
| req->path.path_pad = 0; |
| req->path.path_index = PRIMARY_RING ; |
| |
| /* set P0017 */ |
| req->pl_req.para.p_type = SMT_P0017 ; |
| req->pl_req.para.p_len = sizeof(struct smt_p_0017) - PARA_LEN ; |
| req->pl_req.sba_pl_req = smc->mib.fddiESSPayload - |
| smc->mib.a[PATH0].fddiPATHSbaPayload ; |
| |
| /* set P0018 */ |
| req->ov_req.para.p_type = SMT_P0018 ; |
| req->ov_req.para.p_len = sizeof(struct smt_p_0018) - PARA_LEN ; |
| req->ov_req.sba_ov_req = smc->mib.fddiESSOverhead - |
| smc->mib.a[PATH0].fddiPATHSbaOverhead ; |
| |
| /* set P320F */ |
| req->payload.para.p_type = SMT_P320F ; |
| req->payload.para.p_len = sizeof(struct smt_p_320f) - PARA_LEN ; |
| req->payload.mib_index = SBAPATHINDEX ; |
| req->payload.mib_payload = smc->mib.a[PATH0].fddiPATHSbaPayload ; |
| |
| /* set P3210 */ |
| req->overhead.para.p_type = SMT_P3210 ; |
| req->overhead.para.p_len = sizeof(struct smt_p_3210) - PARA_LEN ; |
| req->overhead.mib_index = SBAPATHINDEX ; |
| req->overhead.mib_overhead = smc->mib.a[PATH0].fddiPATHSbaOverhead ; |
| |
| /* set P19 */ |
| req->a_addr.para.p_type = SMT_P0019 ; |
| req->a_addr.para.p_len = sizeof(struct smt_p_0019) - PARA_LEN ; |
| req->a_addr.sba_pad = 0; |
| req->a_addr.alloc_addr = null_addr ; |
| |
| /* set P1A */ |
| req->cat.para.p_type = SMT_P001A ; |
| req->cat.para.p_len = sizeof(struct smt_p_001a) - PARA_LEN ; |
| req->cat.category = smc->mib.fddiESSCategory ; |
| |
| /* set P1B */ |
| req->tneg.para.p_type = SMT_P001B ; |
| req->tneg.para.p_len = sizeof(struct smt_p_001b) - PARA_LEN ; |
| req->tneg.max_t_neg = smc->mib.fddiESSMaxTNeg ; |
| |
| /* set P1C */ |
| req->segm.para.p_type = SMT_P001C ; |
| req->segm.para.p_len = sizeof(struct smt_p_001c) - PARA_LEN ; |
| req->segm.min_seg_siz = smc->mib.fddiESSMinSegmentSize ; |
| |
| dump_smt(smc,(struct smt_header *)req,"RAF") ; |
| ess_send_frame(smc,mb) ; |
| } |
| |
| static void ess_send_frame(struct s_smc *smc, SMbuf *mb) |
| { |
| /* |
| * check if the frame must be send to the own ESS |
| */ |
| if (smc->ess.local_sba_active) { |
| /* |
| * Send the Change Reply to the local SBA |
| */ |
| DB_ESS("ESS:Send to the local SBA"); |
| if (!smc->ess.sba_reply_pend) |
| smc->ess.sba_reply_pend = mb ; |
| else { |
| DB_ESS("Frame is lost - another frame was pending"); |
| smt_free_mbuf(smc,mb) ; |
| } |
| } |
| else { |
| /* |
| * Send the SBA RAF Change Reply to the network |
| */ |
| DB_ESS("ESS:Send to the network"); |
| smt_send_frame(smc,mb,FC_SMT_INFO,0) ; |
| } |
| } |
| |
| void ess_para_change(struct s_smc *smc) |
| { |
| (void)process_bw_alloc(smc,(long)smc->mib.a[PATH0].fddiPATHSbaPayload, |
| (long)smc->mib.a[PATH0].fddiPATHSbaOverhead) ; |
| } |
| |
| static void ess_config_fifo(struct s_smc *smc) |
| { |
| /* |
| * if nothing to do exit |
| */ |
| if (smc->mib.a[PATH0].fddiPATHSbaPayload) { |
| if (smc->hw.fp.fifo.fifo_config_mode & SYNC_TRAFFIC_ON && |
| (smc->hw.fp.fifo.fifo_config_mode&SEND_ASYNC_AS_SYNC) == |
| smc->mib.fddiESSSynchTxMode) { |
| return ; |
| } |
| } |
| else { |
| if (!(smc->hw.fp.fifo.fifo_config_mode & SYNC_TRAFFIC_ON)) { |
| return ; |
| } |
| } |
| |
| /* |
| * split up the FIFO and reinitialize the queues |
| */ |
| formac_reinit_tx(smc) ; |
| } |
| |
| #endif /* ESS */ |
| |
| #endif /* no SLIM_SMT */ |
| |