| // SPDX-License-Identifier: GPL-2.0-only |
| /* |
| * STMicroelectronics accelerometers driver |
| * |
| * Copyright 2012-2013 STMicroelectronics Inc. |
| * |
| * Denis Ciocca <denis.ciocca@st.com> |
| */ |
| |
| #include <linux/kernel.h> |
| #include <linux/module.h> |
| #include <linux/mutex.h> |
| #include <linux/sysfs.h> |
| #include <linux/slab.h> |
| #include <linux/acpi.h> |
| #include <linux/iio/iio.h> |
| #include <linux/iio/sysfs.h> |
| #include <linux/iio/trigger.h> |
| |
| #include <linux/iio/common/st_sensors.h> |
| #include "st_accel.h" |
| |
| #define ST_ACCEL_NUMBER_DATA_CHANNELS 3 |
| |
| /* DEFAULT VALUE FOR SENSORS */ |
| #define ST_ACCEL_DEFAULT_OUT_X_L_ADDR 0x28 |
| #define ST_ACCEL_DEFAULT_OUT_Y_L_ADDR 0x2a |
| #define ST_ACCEL_DEFAULT_OUT_Z_L_ADDR 0x2c |
| |
| /* FULLSCALE */ |
| #define ST_ACCEL_FS_AVL_2G 2 |
| #define ST_ACCEL_FS_AVL_4G 4 |
| #define ST_ACCEL_FS_AVL_6G 6 |
| #define ST_ACCEL_FS_AVL_8G 8 |
| #define ST_ACCEL_FS_AVL_16G 16 |
| #define ST_ACCEL_FS_AVL_100G 100 |
| #define ST_ACCEL_FS_AVL_200G 200 |
| #define ST_ACCEL_FS_AVL_400G 400 |
| |
| static const struct iio_mount_matrix * |
| st_accel_get_mount_matrix(const struct iio_dev *indio_dev, |
| const struct iio_chan_spec *chan) |
| { |
| struct st_sensor_data *adata = iio_priv(indio_dev); |
| |
| return &adata->mount_matrix; |
| } |
| |
| static const struct iio_chan_spec_ext_info st_accel_mount_matrix_ext_info[] = { |
| IIO_MOUNT_MATRIX(IIO_SHARED_BY_ALL, st_accel_get_mount_matrix), |
| { } |
| }; |
| |
| static const struct iio_chan_spec st_accel_8bit_channels[] = { |
| ST_SENSORS_LSM_CHANNELS_EXT(IIO_ACCEL, |
| BIT(IIO_CHAN_INFO_RAW) | BIT(IIO_CHAN_INFO_SCALE), |
| ST_SENSORS_SCAN_X, 1, IIO_MOD_X, 's', IIO_LE, 8, 8, |
| ST_ACCEL_DEFAULT_OUT_X_L_ADDR+1, |
| st_accel_mount_matrix_ext_info), |
| ST_SENSORS_LSM_CHANNELS_EXT(IIO_ACCEL, |
| BIT(IIO_CHAN_INFO_RAW) | BIT(IIO_CHAN_INFO_SCALE), |
| ST_SENSORS_SCAN_Y, 1, IIO_MOD_Y, 's', IIO_LE, 8, 8, |
| ST_ACCEL_DEFAULT_OUT_Y_L_ADDR+1, |
| st_accel_mount_matrix_ext_info), |
| ST_SENSORS_LSM_CHANNELS_EXT(IIO_ACCEL, |
| BIT(IIO_CHAN_INFO_RAW) | BIT(IIO_CHAN_INFO_SCALE), |
| ST_SENSORS_SCAN_Z, 1, IIO_MOD_Z, 's', IIO_LE, 8, 8, |
| ST_ACCEL_DEFAULT_OUT_Z_L_ADDR+1, |
| st_accel_mount_matrix_ext_info), |
| IIO_CHAN_SOFT_TIMESTAMP(3) |
| }; |
| |
| static const struct iio_chan_spec st_accel_12bit_channels[] = { |
| ST_SENSORS_LSM_CHANNELS_EXT(IIO_ACCEL, |
| BIT(IIO_CHAN_INFO_RAW) | BIT(IIO_CHAN_INFO_SCALE), |
| ST_SENSORS_SCAN_X, 1, IIO_MOD_X, 's', IIO_LE, 12, 16, |
| ST_ACCEL_DEFAULT_OUT_X_L_ADDR, |
| st_accel_mount_matrix_ext_info), |
| ST_SENSORS_LSM_CHANNELS_EXT(IIO_ACCEL, |
| BIT(IIO_CHAN_INFO_RAW) | BIT(IIO_CHAN_INFO_SCALE), |
| ST_SENSORS_SCAN_Y, 1, IIO_MOD_Y, 's', IIO_LE, 12, 16, |
| ST_ACCEL_DEFAULT_OUT_Y_L_ADDR, |
| st_accel_mount_matrix_ext_info), |
| ST_SENSORS_LSM_CHANNELS_EXT(IIO_ACCEL, |
| BIT(IIO_CHAN_INFO_RAW) | BIT(IIO_CHAN_INFO_SCALE), |
| ST_SENSORS_SCAN_Z, 1, IIO_MOD_Z, 's', IIO_LE, 12, 16, |
| ST_ACCEL_DEFAULT_OUT_Z_L_ADDR, |
| st_accel_mount_matrix_ext_info), |
| IIO_CHAN_SOFT_TIMESTAMP(3) |
| }; |
| |
| static const struct iio_chan_spec st_accel_16bit_channels[] = { |
| ST_SENSORS_LSM_CHANNELS_EXT(IIO_ACCEL, |
| BIT(IIO_CHAN_INFO_RAW) | BIT(IIO_CHAN_INFO_SCALE), |
| ST_SENSORS_SCAN_X, 1, IIO_MOD_X, 's', IIO_LE, 16, 16, |
| ST_ACCEL_DEFAULT_OUT_X_L_ADDR, |
| st_accel_mount_matrix_ext_info), |
| ST_SENSORS_LSM_CHANNELS_EXT(IIO_ACCEL, |
| BIT(IIO_CHAN_INFO_RAW) | BIT(IIO_CHAN_INFO_SCALE), |
| ST_SENSORS_SCAN_Y, 1, IIO_MOD_Y, 's', IIO_LE, 16, 16, |
| ST_ACCEL_DEFAULT_OUT_Y_L_ADDR, |
| st_accel_mount_matrix_ext_info), |
| ST_SENSORS_LSM_CHANNELS_EXT(IIO_ACCEL, |
| BIT(IIO_CHAN_INFO_RAW) | BIT(IIO_CHAN_INFO_SCALE), |
| ST_SENSORS_SCAN_Z, 1, IIO_MOD_Z, 's', IIO_LE, 16, 16, |
| ST_ACCEL_DEFAULT_OUT_Z_L_ADDR, |
| st_accel_mount_matrix_ext_info), |
| IIO_CHAN_SOFT_TIMESTAMP(3) |
| }; |
| |
| static const struct st_sensor_settings st_accel_sensors_settings[] = { |
| { |
| .wai = 0x33, |
| .wai_addr = ST_SENSORS_DEFAULT_WAI_ADDRESS, |
| .sensors_supported = { |
| [0] = LIS3DH_ACCEL_DEV_NAME, |
| [1] = LSM303DLHC_ACCEL_DEV_NAME, |
| [2] = LSM330D_ACCEL_DEV_NAME, |
| [3] = LSM330DL_ACCEL_DEV_NAME, |
| [4] = LSM330DLC_ACCEL_DEV_NAME, |
| [5] = LSM303AGR_ACCEL_DEV_NAME, |
| [6] = LIS2DH12_ACCEL_DEV_NAME, |
| [7] = LIS3DE_ACCEL_DEV_NAME, |
| }, |
| .ch = (struct iio_chan_spec *)st_accel_12bit_channels, |
| .odr = { |
| .addr = 0x20, |
| .mask = 0xf0, |
| .odr_avl = { |
| { .hz = 1, .value = 0x01, }, |
| { .hz = 10, .value = 0x02, }, |
| { .hz = 25, .value = 0x03, }, |
| { .hz = 50, .value = 0x04, }, |
| { .hz = 100, .value = 0x05, }, |
| { .hz = 200, .value = 0x06, }, |
| { .hz = 400, .value = 0x07, }, |
| { .hz = 1600, .value = 0x08, }, |
| }, |
| }, |
| .pw = { |
| .addr = 0x20, |
| .mask = 0xf0, |
| .value_off = ST_SENSORS_DEFAULT_POWER_OFF_VALUE, |
| }, |
| .enable_axis = { |
| .addr = ST_SENSORS_DEFAULT_AXIS_ADDR, |
| .mask = ST_SENSORS_DEFAULT_AXIS_MASK, |
| }, |
| .fs = { |
| .addr = 0x23, |
| .mask = 0x30, |
| .fs_avl = { |
| [0] = { |
| .num = ST_ACCEL_FS_AVL_2G, |
| .value = 0x00, |
| .gain = IIO_G_TO_M_S_2(1000), |
| }, |
| [1] = { |
| .num = ST_ACCEL_FS_AVL_4G, |
| .value = 0x01, |
| .gain = IIO_G_TO_M_S_2(2000), |
| }, |
| [2] = { |
| .num = ST_ACCEL_FS_AVL_8G, |
| .value = 0x02, |
| .gain = IIO_G_TO_M_S_2(4000), |
| }, |
| [3] = { |
| .num = ST_ACCEL_FS_AVL_16G, |
| .value = 0x03, |
| .gain = IIO_G_TO_M_S_2(12000), |
| }, |
| }, |
| }, |
| .bdu = { |
| .addr = 0x23, |
| .mask = 0x80, |
| }, |
| .drdy_irq = { |
| .int1 = { |
| .addr = 0x22, |
| .mask = 0x10, |
| }, |
| .addr_ihl = 0x25, |
| .mask_ihl = 0x02, |
| .stat_drdy = { |
| .addr = ST_SENSORS_DEFAULT_STAT_ADDR, |
| .mask = 0x07, |
| }, |
| }, |
| .sim = { |
| .addr = 0x23, |
| .value = BIT(0), |
| }, |
| .multi_read_bit = true, |
| .bootime = 2, |
| }, |
| { |
| .wai = 0x32, |
| .wai_addr = ST_SENSORS_DEFAULT_WAI_ADDRESS, |
| .sensors_supported = { |
| [0] = LIS331DLH_ACCEL_DEV_NAME, |
| [1] = LSM303DL_ACCEL_DEV_NAME, |
| [2] = LSM303DLH_ACCEL_DEV_NAME, |
| [3] = LSM303DLM_ACCEL_DEV_NAME, |
| }, |
| .ch = (struct iio_chan_spec *)st_accel_12bit_channels, |
| .odr = { |
| .addr = 0x20, |
| .mask = 0x18, |
| .odr_avl = { |
| { .hz = 50, .value = 0x00, }, |
| { .hz = 100, .value = 0x01, }, |
| { .hz = 400, .value = 0x02, }, |
| { .hz = 1000, .value = 0x03, }, |
| }, |
| }, |
| .pw = { |
| .addr = 0x20, |
| .mask = 0xe0, |
| .value_on = ST_SENSORS_DEFAULT_POWER_ON_VALUE, |
| .value_off = ST_SENSORS_DEFAULT_POWER_OFF_VALUE, |
| }, |
| .enable_axis = { |
| .addr = ST_SENSORS_DEFAULT_AXIS_ADDR, |
| .mask = ST_SENSORS_DEFAULT_AXIS_MASK, |
| }, |
| .fs = { |
| .addr = 0x23, |
| .mask = 0x30, |
| .fs_avl = { |
| [0] = { |
| .num = ST_ACCEL_FS_AVL_2G, |
| .value = 0x00, |
| .gain = IIO_G_TO_M_S_2(1000), |
| }, |
| [1] = { |
| .num = ST_ACCEL_FS_AVL_4G, |
| .value = 0x01, |
| .gain = IIO_G_TO_M_S_2(2000), |
| }, |
| [2] = { |
| .num = ST_ACCEL_FS_AVL_8G, |
| .value = 0x03, |
| .gain = IIO_G_TO_M_S_2(3900), |
| }, |
| }, |
| }, |
| .bdu = { |
| .addr = 0x23, |
| .mask = 0x80, |
| }, |
| .drdy_irq = { |
| .int1 = { |
| .addr = 0x22, |
| .mask = 0x02, |
| .addr_od = 0x22, |
| .mask_od = 0x40, |
| }, |
| .int2 = { |
| .addr = 0x22, |
| .mask = 0x10, |
| .addr_od = 0x22, |
| .mask_od = 0x40, |
| }, |
| .addr_ihl = 0x22, |
| .mask_ihl = 0x80, |
| .stat_drdy = { |
| .addr = ST_SENSORS_DEFAULT_STAT_ADDR, |
| .mask = 0x07, |
| }, |
| }, |
| .sim = { |
| .addr = 0x23, |
| .value = BIT(0), |
| }, |
| .multi_read_bit = true, |
| .bootime = 2, |
| }, |
| { |
| .wai = 0x40, |
| .wai_addr = ST_SENSORS_DEFAULT_WAI_ADDRESS, |
| .sensors_supported = { |
| [0] = LSM330_ACCEL_DEV_NAME, |
| }, |
| .ch = (struct iio_chan_spec *)st_accel_16bit_channels, |
| .odr = { |
| .addr = 0x20, |
| .mask = 0xf0, |
| .odr_avl = { |
| { .hz = 3, .value = 0x01, }, |
| { .hz = 6, .value = 0x02, }, |
| { .hz = 12, .value = 0x03, }, |
| { .hz = 25, .value = 0x04, }, |
| { .hz = 50, .value = 0x05, }, |
| { .hz = 100, .value = 0x06, }, |
| { .hz = 200, .value = 0x07, }, |
| { .hz = 400, .value = 0x08, }, |
| { .hz = 800, .value = 0x09, }, |
| { .hz = 1600, .value = 0x0a, }, |
| }, |
| }, |
| .pw = { |
| .addr = 0x20, |
| .mask = 0xf0, |
| .value_off = ST_SENSORS_DEFAULT_POWER_OFF_VALUE, |
| }, |
| .enable_axis = { |
| .addr = ST_SENSORS_DEFAULT_AXIS_ADDR, |
| .mask = ST_SENSORS_DEFAULT_AXIS_MASK, |
| }, |
| .fs = { |
| .addr = 0x24, |
| .mask = 0x38, |
| .fs_avl = { |
| [0] = { |
| .num = ST_ACCEL_FS_AVL_2G, |
| .value = 0x00, |
| .gain = IIO_G_TO_M_S_2(61), |
| }, |
| [1] = { |
| .num = ST_ACCEL_FS_AVL_4G, |
| .value = 0x01, |
| .gain = IIO_G_TO_M_S_2(122), |
| }, |
| [2] = { |
| .num = ST_ACCEL_FS_AVL_6G, |
| .value = 0x02, |
| .gain = IIO_G_TO_M_S_2(183), |
| }, |
| [3] = { |
| .num = ST_ACCEL_FS_AVL_8G, |
| .value = 0x03, |
| .gain = IIO_G_TO_M_S_2(244), |
| }, |
| [4] = { |
| .num = ST_ACCEL_FS_AVL_16G, |
| .value = 0x04, |
| .gain = IIO_G_TO_M_S_2(732), |
| }, |
| }, |
| }, |
| .bdu = { |
| .addr = 0x20, |
| .mask = 0x08, |
| }, |
| .drdy_irq = { |
| .int1 = { |
| .addr = 0x23, |
| .mask = 0x80, |
| }, |
| .addr_ihl = 0x23, |
| .mask_ihl = 0x40, |
| .stat_drdy = { |
| .addr = ST_SENSORS_DEFAULT_STAT_ADDR, |
| .mask = 0x07, |
| }, |
| .ig1 = { |
| .en_addr = 0x23, |
| .en_mask = 0x08, |
| }, |
| }, |
| .sim = { |
| .addr = 0x24, |
| .value = BIT(0), |
| }, |
| .multi_read_bit = false, |
| .bootime = 2, |
| }, |
| { |
| .wai = 0x3a, |
| .wai_addr = ST_SENSORS_DEFAULT_WAI_ADDRESS, |
| .sensors_supported = { |
| [0] = LIS3LV02DL_ACCEL_DEV_NAME, |
| }, |
| .ch = (struct iio_chan_spec *)st_accel_12bit_channels, |
| .odr = { |
| .addr = 0x20, |
| .mask = 0x30, /* DF1 and DF0 */ |
| .odr_avl = { |
| { .hz = 40, .value = 0x00, }, |
| { .hz = 160, .value = 0x01, }, |
| { .hz = 640, .value = 0x02, }, |
| { .hz = 2560, .value = 0x03, }, |
| }, |
| }, |
| .pw = { |
| .addr = 0x20, |
| .mask = 0xc0, |
| .value_on = ST_SENSORS_DEFAULT_POWER_ON_VALUE, |
| .value_off = ST_SENSORS_DEFAULT_POWER_OFF_VALUE, |
| }, |
| .enable_axis = { |
| .addr = ST_SENSORS_DEFAULT_AXIS_ADDR, |
| .mask = ST_SENSORS_DEFAULT_AXIS_MASK, |
| }, |
| .fs = { |
| .addr = 0x21, |
| .mask = 0x80, |
| .fs_avl = { |
| [0] = { |
| .num = ST_ACCEL_FS_AVL_2G, |
| .value = 0x00, |
| .gain = IIO_G_TO_M_S_2(1000), |
| }, |
| [1] = { |
| .num = ST_ACCEL_FS_AVL_6G, |
| .value = 0x01, |
| .gain = IIO_G_TO_M_S_2(3000), |
| }, |
| }, |
| }, |
| .bdu = { |
| .addr = 0x21, |
| .mask = 0x40, |
| }, |
| /* |
| * Data Alignment Setting - needs to be set to get |
| * left-justified data like all other sensors. |
| */ |
| .das = { |
| .addr = 0x21, |
| .mask = 0x01, |
| }, |
| .drdy_irq = { |
| .int1 = { |
| .addr = 0x21, |
| .mask = 0x04, |
| }, |
| .stat_drdy = { |
| .addr = ST_SENSORS_DEFAULT_STAT_ADDR, |
| .mask = 0x07, |
| }, |
| }, |
| .sim = { |
| .addr = 0x21, |
| .value = BIT(1), |
| }, |
| .multi_read_bit = true, |
| .bootime = 2, /* guess */ |
| }, |
| { |
| .wai = 0x3b, |
| .wai_addr = ST_SENSORS_DEFAULT_WAI_ADDRESS, |
| .sensors_supported = { |
| [0] = LIS331DL_ACCEL_DEV_NAME, |
| [1] = LIS302DL_ACCEL_DEV_NAME, |
| }, |
| .ch = (struct iio_chan_spec *)st_accel_8bit_channels, |
| .odr = { |
| .addr = 0x20, |
| .mask = 0x80, |
| .odr_avl = { |
| { .hz = 100, .value = 0x00, }, |
| { .hz = 400, .value = 0x01, }, |
| }, |
| }, |
| .pw = { |
| .addr = 0x20, |
| .mask = 0x40, |
| .value_on = ST_SENSORS_DEFAULT_POWER_ON_VALUE, |
| .value_off = ST_SENSORS_DEFAULT_POWER_OFF_VALUE, |
| }, |
| .enable_axis = { |
| .addr = ST_SENSORS_DEFAULT_AXIS_ADDR, |
| .mask = ST_SENSORS_DEFAULT_AXIS_MASK, |
| }, |
| .fs = { |
| .addr = 0x20, |
| .mask = 0x20, |
| /* |
| * TODO: check these resulting gain settings, these are |
| * not in the datsheet |
| */ |
| .fs_avl = { |
| [0] = { |
| .num = ST_ACCEL_FS_AVL_2G, |
| .value = 0x00, |
| .gain = IIO_G_TO_M_S_2(18000), |
| }, |
| [1] = { |
| .num = ST_ACCEL_FS_AVL_8G, |
| .value = 0x01, |
| .gain = IIO_G_TO_M_S_2(72000), |
| }, |
| }, |
| }, |
| .drdy_irq = { |
| .int1 = { |
| .addr = 0x22, |
| .mask = 0x04, |
| .addr_od = 0x22, |
| .mask_od = 0x40, |
| }, |
| .int2 = { |
| .addr = 0x22, |
| .mask = 0x20, |
| .addr_od = 0x22, |
| .mask_od = 0x40, |
| }, |
| .addr_ihl = 0x22, |
| .mask_ihl = 0x80, |
| .stat_drdy = { |
| .addr = ST_SENSORS_DEFAULT_STAT_ADDR, |
| .mask = 0x07, |
| }, |
| }, |
| .sim = { |
| .addr = 0x21, |
| .value = BIT(7), |
| }, |
| .multi_read_bit = false, |
| .bootime = 2, /* guess */ |
| }, |
| { |
| .wai = 0x32, |
| .wai_addr = ST_SENSORS_DEFAULT_WAI_ADDRESS, |
| .sensors_supported = { |
| [0] = H3LIS331DL_ACCEL_DEV_NAME, |
| [1] = IIS328DQ_ACCEL_DEV_NAME, |
| }, |
| .ch = (struct iio_chan_spec *)st_accel_12bit_channels, |
| .odr = { |
| .addr = 0x20, |
| .mask = 0x18, |
| .odr_avl = { |
| { .hz = 50, .value = 0x00, }, |
| { .hz = 100, .value = 0x01, }, |
| { .hz = 400, .value = 0x02, }, |
| { .hz = 1000, .value = 0x03, }, |
| }, |
| }, |
| .pw = { |
| .addr = 0x20, |
| .mask = 0x20, |
| .value_on = ST_SENSORS_DEFAULT_POWER_ON_VALUE, |
| .value_off = ST_SENSORS_DEFAULT_POWER_OFF_VALUE, |
| }, |
| .enable_axis = { |
| .addr = ST_SENSORS_DEFAULT_AXIS_ADDR, |
| .mask = ST_SENSORS_DEFAULT_AXIS_MASK, |
| }, |
| .fs = { |
| .addr = 0x23, |
| .mask = 0x30, |
| .fs_avl = { |
| [0] = { |
| .num = ST_ACCEL_FS_AVL_100G, |
| .value = 0x00, |
| .gain = IIO_G_TO_M_S_2(49000), |
| }, |
| [1] = { |
| .num = ST_ACCEL_FS_AVL_200G, |
| .value = 0x01, |
| .gain = IIO_G_TO_M_S_2(98000), |
| }, |
| [2] = { |
| .num = ST_ACCEL_FS_AVL_400G, |
| .value = 0x03, |
| .gain = IIO_G_TO_M_S_2(195000), |
| }, |
| }, |
| }, |
| .bdu = { |
| .addr = 0x23, |
| .mask = 0x80, |
| }, |
| .drdy_irq = { |
| .int1 = { |
| .addr = 0x22, |
| .mask = 0x02, |
| }, |
| .int2 = { |
| .addr = 0x22, |
| .mask = 0x10, |
| }, |
| .addr_ihl = 0x22, |
| .mask_ihl = 0x80, |
| }, |
| .sim = { |
| .addr = 0x23, |
| .value = BIT(0), |
| }, |
| .multi_read_bit = true, |
| .bootime = 2, |
| }, |
| { |
| /* No WAI register present */ |
| .sensors_supported = { |
| [0] = LIS3L02DQ_ACCEL_DEV_NAME, |
| }, |
| .ch = (struct iio_chan_spec *)st_accel_12bit_channels, |
| .odr = { |
| .addr = 0x20, |
| .mask = 0x30, |
| .odr_avl = { |
| { .hz = 280, .value = 0x00, }, |
| { .hz = 560, .value = 0x01, }, |
| { .hz = 1120, .value = 0x02, }, |
| { .hz = 4480, .value = 0x03, }, |
| }, |
| }, |
| .pw = { |
| .addr = 0x20, |
| .mask = 0xc0, |
| .value_on = ST_SENSORS_DEFAULT_POWER_ON_VALUE, |
| .value_off = ST_SENSORS_DEFAULT_POWER_OFF_VALUE, |
| }, |
| .enable_axis = { |
| .addr = ST_SENSORS_DEFAULT_AXIS_ADDR, |
| .mask = ST_SENSORS_DEFAULT_AXIS_MASK, |
| }, |
| .fs = { |
| .fs_avl = { |
| [0] = { |
| .num = ST_ACCEL_FS_AVL_2G, |
| .gain = IIO_G_TO_M_S_2(488), |
| }, |
| }, |
| }, |
| /* |
| * The part has a BDU bit but if set the data is never |
| * updated so don't set it. |
| */ |
| .bdu = { |
| }, |
| .drdy_irq = { |
| .int1 = { |
| .addr = 0x21, |
| .mask = 0x04, |
| }, |
| .stat_drdy = { |
| .addr = ST_SENSORS_DEFAULT_STAT_ADDR, |
| .mask = 0x07, |
| }, |
| }, |
| .sim = { |
| .addr = 0x21, |
| .value = BIT(1), |
| }, |
| .multi_read_bit = false, |
| .bootime = 2, |
| }, |
| { |
| .wai = 0x33, |
| .wai_addr = ST_SENSORS_DEFAULT_WAI_ADDRESS, |
| .sensors_supported = { |
| [0] = LNG2DM_ACCEL_DEV_NAME, |
| }, |
| .ch = (struct iio_chan_spec *)st_accel_8bit_channels, |
| .odr = { |
| .addr = 0x20, |
| .mask = 0xf0, |
| .odr_avl = { |
| { .hz = 1, .value = 0x01, }, |
| { .hz = 10, .value = 0x02, }, |
| { .hz = 25, .value = 0x03, }, |
| { .hz = 50, .value = 0x04, }, |
| { .hz = 100, .value = 0x05, }, |
| { .hz = 200, .value = 0x06, }, |
| { .hz = 400, .value = 0x07, }, |
| { .hz = 1600, .value = 0x08, }, |
| }, |
| }, |
| .pw = { |
| .addr = 0x20, |
| .mask = 0xf0, |
| .value_off = ST_SENSORS_DEFAULT_POWER_OFF_VALUE, |
| }, |
| .enable_axis = { |
| .addr = ST_SENSORS_DEFAULT_AXIS_ADDR, |
| .mask = ST_SENSORS_DEFAULT_AXIS_MASK, |
| }, |
| .fs = { |
| .addr = 0x23, |
| .mask = 0x30, |
| .fs_avl = { |
| [0] = { |
| .num = ST_ACCEL_FS_AVL_2G, |
| .value = 0x00, |
| .gain = IIO_G_TO_M_S_2(15600), |
| }, |
| [1] = { |
| .num = ST_ACCEL_FS_AVL_4G, |
| .value = 0x01, |
| .gain = IIO_G_TO_M_S_2(31200), |
| }, |
| [2] = { |
| .num = ST_ACCEL_FS_AVL_8G, |
| .value = 0x02, |
| .gain = IIO_G_TO_M_S_2(62500), |
| }, |
| [3] = { |
| .num = ST_ACCEL_FS_AVL_16G, |
| .value = 0x03, |
| .gain = IIO_G_TO_M_S_2(187500), |
| }, |
| }, |
| }, |
| .drdy_irq = { |
| .int1 = { |
| .addr = 0x22, |
| .mask = 0x10, |
| }, |
| .addr_ihl = 0x25, |
| .mask_ihl = 0x02, |
| .stat_drdy = { |
| .addr = ST_SENSORS_DEFAULT_STAT_ADDR, |
| .mask = 0x07, |
| }, |
| }, |
| .sim = { |
| .addr = 0x23, |
| .value = BIT(0), |
| }, |
| .multi_read_bit = true, |
| .bootime = 2, |
| }, |
| { |
| .wai = 0x44, |
| .wai_addr = ST_SENSORS_DEFAULT_WAI_ADDRESS, |
| .sensors_supported = { |
| [0] = LIS2DW12_ACCEL_DEV_NAME, |
| }, |
| .ch = (struct iio_chan_spec *)st_accel_12bit_channels, |
| .odr = { |
| .addr = 0x20, |
| .mask = 0xf0, |
| .odr_avl = { |
| { .hz = 1, .value = 0x01, }, |
| { .hz = 12, .value = 0x02, }, |
| { .hz = 25, .value = 0x03, }, |
| { .hz = 50, .value = 0x04, }, |
| { .hz = 100, .value = 0x05, }, |
| { .hz = 200, .value = 0x06, }, |
| }, |
| }, |
| .pw = { |
| .addr = 0x20, |
| .mask = 0xf0, |
| .value_off = ST_SENSORS_DEFAULT_POWER_OFF_VALUE, |
| }, |
| .fs = { |
| .addr = 0x25, |
| .mask = 0x30, |
| .fs_avl = { |
| [0] = { |
| .num = ST_ACCEL_FS_AVL_2G, |
| .value = 0x00, |
| .gain = IIO_G_TO_M_S_2(976), |
| }, |
| [1] = { |
| .num = ST_ACCEL_FS_AVL_4G, |
| .value = 0x01, |
| .gain = IIO_G_TO_M_S_2(1952), |
| }, |
| [2] = { |
| .num = ST_ACCEL_FS_AVL_8G, |
| .value = 0x02, |
| .gain = IIO_G_TO_M_S_2(3904), |
| }, |
| [3] = { |
| .num = ST_ACCEL_FS_AVL_16G, |
| .value = 0x03, |
| .gain = IIO_G_TO_M_S_2(7808), |
| }, |
| }, |
| }, |
| .bdu = { |
| .addr = 0x21, |
| .mask = 0x08, |
| }, |
| .drdy_irq = { |
| .int1 = { |
| .addr = 0x23, |
| .mask = 0x01, |
| .addr_od = 0x22, |
| .mask_od = 0x20, |
| }, |
| .int2 = { |
| .addr = 0x24, |
| .mask = 0x01, |
| .addr_od = 0x22, |
| .mask_od = 0x20, |
| }, |
| .addr_ihl = 0x22, |
| .mask_ihl = 0x08, |
| .stat_drdy = { |
| .addr = ST_SENSORS_DEFAULT_STAT_ADDR, |
| .mask = 0x01, |
| }, |
| }, |
| .sim = { |
| .addr = 0x21, |
| .value = BIT(0), |
| }, |
| .multi_read_bit = false, |
| .bootime = 2, |
| }, |
| { |
| .wai = 0x11, |
| .wai_addr = ST_SENSORS_DEFAULT_WAI_ADDRESS, |
| .sensors_supported = { |
| [0] = LIS3DHH_ACCEL_DEV_NAME, |
| }, |
| .ch = (struct iio_chan_spec *)st_accel_16bit_channels, |
| .odr = { |
| /* just ODR = 1100Hz available */ |
| .odr_avl = { |
| { .hz = 1100, .value = 0x00, }, |
| }, |
| }, |
| .pw = { |
| .addr = 0x20, |
| .mask = 0x80, |
| .value_on = ST_SENSORS_DEFAULT_POWER_ON_VALUE, |
| .value_off = ST_SENSORS_DEFAULT_POWER_OFF_VALUE, |
| }, |
| .fs = { |
| .fs_avl = { |
| [0] = { |
| .num = ST_ACCEL_FS_AVL_2G, |
| .gain = IIO_G_TO_M_S_2(76), |
| }, |
| }, |
| }, |
| .bdu = { |
| .addr = 0x20, |
| .mask = 0x01, |
| }, |
| .drdy_irq = { |
| .int1 = { |
| .addr = 0x21, |
| .mask = 0x80, |
| .addr_od = 0x23, |
| .mask_od = 0x04, |
| }, |
| .int2 = { |
| .addr = 0x22, |
| .mask = 0x80, |
| .addr_od = 0x23, |
| .mask_od = 0x08, |
| }, |
| .stat_drdy = { |
| .addr = ST_SENSORS_DEFAULT_STAT_ADDR, |
| .mask = 0x07, |
| }, |
| }, |
| .multi_read_bit = false, |
| .bootime = 2, |
| }, |
| { |
| .wai = 0x33, |
| .wai_addr = ST_SENSORS_DEFAULT_WAI_ADDRESS, |
| .sensors_supported = { |
| [0] = LIS2DE12_ACCEL_DEV_NAME, |
| }, |
| .ch = (struct iio_chan_spec *)st_accel_8bit_channels, |
| .odr = { |
| .addr = 0x20, |
| .mask = 0xf0, |
| .odr_avl = { |
| { .hz = 1, .value = 0x01, }, |
| { .hz = 10, .value = 0x02, }, |
| { .hz = 25, .value = 0x03, }, |
| { .hz = 50, .value = 0x04, }, |
| { .hz = 100, .value = 0x05, }, |
| { .hz = 200, .value = 0x06, }, |
| { .hz = 400, .value = 0x07, }, |
| { .hz = 1620, .value = 0x08, }, |
| { .hz = 5376, .value = 0x09, }, |
| }, |
| }, |
| .pw = { |
| .addr = 0x20, |
| .mask = 0xf0, |
| .value_off = ST_SENSORS_DEFAULT_POWER_OFF_VALUE, |
| }, |
| .enable_axis = { |
| .addr = ST_SENSORS_DEFAULT_AXIS_ADDR, |
| .mask = ST_SENSORS_DEFAULT_AXIS_MASK, |
| }, |
| .fs = { |
| .addr = 0x23, |
| .mask = 0x30, |
| .fs_avl = { |
| [0] = { |
| .num = ST_ACCEL_FS_AVL_2G, |
| .value = 0x00, |
| .gain = IIO_G_TO_M_S_2(15600), |
| }, |
| [1] = { |
| .num = ST_ACCEL_FS_AVL_4G, |
| .value = 0x01, |
| .gain = IIO_G_TO_M_S_2(31200), |
| }, |
| [2] = { |
| .num = ST_ACCEL_FS_AVL_8G, |
| .value = 0x02, |
| .gain = IIO_G_TO_M_S_2(62500), |
| }, |
| [3] = { |
| .num = ST_ACCEL_FS_AVL_16G, |
| .value = 0x03, |
| .gain = IIO_G_TO_M_S_2(187500), |
| }, |
| }, |
| }, |
| .drdy_irq = { |
| .int1 = { |
| .addr = 0x22, |
| .mask = 0x10, |
| }, |
| .addr_ihl = 0x25, |
| .mask_ihl = 0x02, |
| .stat_drdy = { |
| .addr = ST_SENSORS_DEFAULT_STAT_ADDR, |
| .mask = 0x07, |
| }, |
| }, |
| .sim = { |
| .addr = 0x23, |
| .value = BIT(0), |
| }, |
| .multi_read_bit = true, |
| .bootime = 2, |
| }, |
| { |
| .wai = 0x41, |
| .wai_addr = ST_SENSORS_DEFAULT_WAI_ADDRESS, |
| .sensors_supported = { |
| [0] = LIS2HH12_ACCEL_DEV_NAME, |
| [1] = LSM303C_ACCEL_DEV_NAME, |
| }, |
| .ch = (struct iio_chan_spec *)st_accel_16bit_channels, |
| .odr = { |
| .addr = 0x20, |
| .mask = 0x70, |
| .odr_avl = { |
| { .hz = 10, .value = 0x01, }, |
| { .hz = 50, .value = 0x02, }, |
| { .hz = 100, .value = 0x03, }, |
| { .hz = 200, .value = 0x04, }, |
| { .hz = 400, .value = 0x05, }, |
| { .hz = 800, .value = 0x06, }, |
| }, |
| }, |
| .pw = { |
| .addr = 0x20, |
| .mask = 0x70, |
| .value_off = ST_SENSORS_DEFAULT_POWER_OFF_VALUE, |
| }, |
| .enable_axis = { |
| .addr = ST_SENSORS_DEFAULT_AXIS_ADDR, |
| .mask = ST_SENSORS_DEFAULT_AXIS_MASK, |
| }, |
| .fs = { |
| .addr = 0x23, |
| .mask = 0x30, |
| .fs_avl = { |
| [0] = { |
| .num = ST_ACCEL_FS_AVL_2G, |
| .value = 0x00, |
| .gain = IIO_G_TO_M_S_2(61), |
| }, |
| [1] = { |
| .num = ST_ACCEL_FS_AVL_4G, |
| .value = 0x02, |
| .gain = IIO_G_TO_M_S_2(122), |
| }, |
| [2] = { |
| .num = ST_ACCEL_FS_AVL_8G, |
| .value = 0x03, |
| .gain = IIO_G_TO_M_S_2(244), |
| }, |
| }, |
| }, |
| .bdu = { |
| .addr = 0x20, |
| .mask = 0x08, |
| }, |
| .drdy_irq = { |
| .int1 = { |
| .addr = 0x22, |
| .mask = 0x01, |
| }, |
| .int2 = { |
| .addr = 0x25, |
| .mask = 0x01, |
| }, |
| .addr_ihl = 0x24, |
| .mask_ihl = 0x02, |
| .stat_drdy = { |
| .addr = ST_SENSORS_DEFAULT_STAT_ADDR, |
| .mask = 0x07, |
| }, |
| }, |
| .sim = { |
| .addr = 0x23, |
| .value = BIT(0), |
| }, |
| .multi_read_bit = true, |
| .bootime = 2, |
| }, |
| { |
| .wai = 0x49, |
| .wai_addr = ST_SENSORS_DEFAULT_WAI_ADDRESS, |
| .sensors_supported = { |
| [0] = LSM9DS0_IMU_DEV_NAME, |
| }, |
| .ch = (struct iio_chan_spec *)st_accel_16bit_channels, |
| .odr = { |
| .addr = 0x20, |
| .mask = GENMASK(7, 4), |
| .odr_avl = { |
| { 3, 0x01, }, |
| { 6, 0x02, }, |
| { 12, 0x03, }, |
| { 25, 0x04, }, |
| { 50, 0x05, }, |
| { 100, 0x06, }, |
| { 200, 0x07, }, |
| { 400, 0x08, }, |
| { 800, 0x09, }, |
| { 1600, 0x0a, }, |
| }, |
| }, |
| .pw = { |
| .addr = 0x20, |
| .mask = GENMASK(7, 4), |
| .value_off = ST_SENSORS_DEFAULT_POWER_OFF_VALUE, |
| }, |
| .enable_axis = { |
| .addr = ST_SENSORS_DEFAULT_AXIS_ADDR, |
| .mask = ST_SENSORS_DEFAULT_AXIS_MASK, |
| }, |
| .fs = { |
| .addr = 0x21, |
| .mask = GENMASK(5, 3), |
| .fs_avl = { |
| [0] = { |
| .num = ST_ACCEL_FS_AVL_2G, |
| .value = 0x00, |
| .gain = IIO_G_TO_M_S_2(61), |
| }, |
| [1] = { |
| .num = ST_ACCEL_FS_AVL_4G, |
| .value = 0x01, |
| .gain = IIO_G_TO_M_S_2(122), |
| }, |
| [2] = { |
| .num = ST_ACCEL_FS_AVL_6G, |
| .value = 0x02, |
| .gain = IIO_G_TO_M_S_2(183), |
| }, |
| [3] = { |
| .num = ST_ACCEL_FS_AVL_8G, |
| .value = 0x03, |
| .gain = IIO_G_TO_M_S_2(244), |
| }, |
| [4] = { |
| .num = ST_ACCEL_FS_AVL_16G, |
| .value = 0x04, |
| .gain = IIO_G_TO_M_S_2(732), |
| }, |
| }, |
| }, |
| .bdu = { |
| .addr = 0x20, |
| .mask = BIT(3), |
| }, |
| .drdy_irq = { |
| .int1 = { |
| .addr = 0x22, |
| .mask = BIT(2), |
| }, |
| .int2 = { |
| .addr = 0x23, |
| .mask = BIT(3), |
| }, |
| .stat_drdy = { |
| .addr = ST_SENSORS_DEFAULT_STAT_ADDR, |
| .mask = GENMASK(2, 0), |
| }, |
| }, |
| .sim = { |
| .addr = 0x21, |
| .value = BIT(0), |
| }, |
| .multi_read_bit = true, |
| .bootime = 2, |
| }, |
| { |
| /* |
| * Not an ST part. Register-compatible with the LIS2DH, even |
| * though the WAI value is different. |
| */ |
| .wai = 0x11, |
| .wai_addr = ST_SENSORS_DEFAULT_WAI_ADDRESS, |
| .sensors_supported = { |
| [0] = SC7A20_ACCEL_DEV_NAME, |
| }, |
| .ch = (struct iio_chan_spec *)st_accel_12bit_channels, |
| .odr = { |
| .addr = 0x20, |
| .mask = 0xf0, |
| .odr_avl = { |
| { .hz = 1, .value = 0x01, }, |
| { .hz = 10, .value = 0x02, }, |
| { .hz = 25, .value = 0x03, }, |
| { .hz = 50, .value = 0x04, }, |
| { .hz = 100, .value = 0x05, }, |
| { .hz = 200, .value = 0x06, }, |
| { .hz = 400, .value = 0x07, }, |
| { .hz = 1600, .value = 0x08, }, |
| }, |
| }, |
| .pw = { |
| .addr = 0x20, |
| .mask = 0xf0, |
| .value_off = ST_SENSORS_DEFAULT_POWER_OFF_VALUE, |
| }, |
| .enable_axis = { |
| .addr = ST_SENSORS_DEFAULT_AXIS_ADDR, |
| .mask = ST_SENSORS_DEFAULT_AXIS_MASK, |
| }, |
| .fs = { |
| .addr = 0x23, |
| .mask = 0x30, |
| .fs_avl = { |
| [0] = { |
| .num = ST_ACCEL_FS_AVL_2G, |
| .value = 0x00, |
| .gain = IIO_G_TO_M_S_2(1000), |
| }, |
| [1] = { |
| .num = ST_ACCEL_FS_AVL_4G, |
| .value = 0x01, |
| .gain = IIO_G_TO_M_S_2(2000), |
| }, |
| [2] = { |
| .num = ST_ACCEL_FS_AVL_8G, |
| .value = 0x02, |
| .gain = IIO_G_TO_M_S_2(4000), |
| }, |
| [3] = { |
| .num = ST_ACCEL_FS_AVL_16G, |
| .value = 0x03, |
| .gain = IIO_G_TO_M_S_2(12000), |
| }, |
| }, |
| }, |
| .bdu = { |
| .addr = 0x23, |
| .mask = 0x80, |
| }, |
| .drdy_irq = { |
| .int1 = { |
| .addr = 0x22, |
| .mask = 0x10, |
| }, |
| .addr_ihl = 0x25, |
| .mask_ihl = 0x02, |
| .stat_drdy = { |
| .addr = ST_SENSORS_DEFAULT_STAT_ADDR, |
| .mask = 0x07, |
| }, |
| }, |
| .sim = { |
| .addr = 0x23, |
| .value = BIT(0), |
| }, |
| .multi_read_bit = true, |
| .bootime = 2, |
| }, |
| }; |
| |
| /* Default accel DRDY is available on INT1 pin */ |
| static const struct st_sensors_platform_data default_accel_pdata = { |
| .drdy_int_pin = 1, |
| }; |
| |
| static int st_accel_read_raw(struct iio_dev *indio_dev, |
| struct iio_chan_spec const *ch, int *val, |
| int *val2, long mask) |
| { |
| int err; |
| struct st_sensor_data *adata = iio_priv(indio_dev); |
| |
| switch (mask) { |
| case IIO_CHAN_INFO_RAW: |
| err = st_sensors_read_info_raw(indio_dev, ch, val); |
| if (err < 0) |
| goto read_error; |
| |
| return IIO_VAL_INT; |
| case IIO_CHAN_INFO_SCALE: |
| *val = adata->current_fullscale->gain / 1000000; |
| *val2 = adata->current_fullscale->gain % 1000000; |
| return IIO_VAL_INT_PLUS_MICRO; |
| case IIO_CHAN_INFO_SAMP_FREQ: |
| *val = adata->odr; |
| return IIO_VAL_INT; |
| default: |
| return -EINVAL; |
| } |
| |
| read_error: |
| return err; |
| } |
| |
| static int st_accel_write_raw(struct iio_dev *indio_dev, |
| struct iio_chan_spec const *chan, int val, int val2, long mask) |
| { |
| switch (mask) { |
| case IIO_CHAN_INFO_SCALE: { |
| int gain; |
| |
| gain = val * 1000000 + val2; |
| return st_sensors_set_fullscale_by_gain(indio_dev, gain); |
| } |
| case IIO_CHAN_INFO_SAMP_FREQ: |
| if (val2) |
| return -EINVAL; |
| |
| return st_sensors_set_odr(indio_dev, val); |
| default: |
| return -EINVAL; |
| } |
| } |
| |
| static ST_SENSORS_DEV_ATTR_SAMP_FREQ_AVAIL(); |
| static ST_SENSORS_DEV_ATTR_SCALE_AVAIL(in_accel_scale_available); |
| |
| static struct attribute *st_accel_attributes[] = { |
| &iio_dev_attr_sampling_frequency_available.dev_attr.attr, |
| &iio_dev_attr_in_accel_scale_available.dev_attr.attr, |
| NULL, |
| }; |
| |
| static const struct attribute_group st_accel_attribute_group = { |
| .attrs = st_accel_attributes, |
| }; |
| |
| static const struct iio_info accel_info = { |
| .attrs = &st_accel_attribute_group, |
| .read_raw = &st_accel_read_raw, |
| .write_raw = &st_accel_write_raw, |
| .debugfs_reg_access = &st_sensors_debugfs_reg_access, |
| }; |
| |
| #ifdef CONFIG_IIO_TRIGGER |
| static const struct iio_trigger_ops st_accel_trigger_ops = { |
| .set_trigger_state = ST_ACCEL_TRIGGER_SET_STATE, |
| .validate_device = st_sensors_validate_device, |
| }; |
| #define ST_ACCEL_TRIGGER_OPS (&st_accel_trigger_ops) |
| #else |
| #define ST_ACCEL_TRIGGER_OPS NULL |
| #endif |
| |
| #ifdef CONFIG_ACPI |
| /* Read ST-specific _ONT orientation data from ACPI and generate an |
| * appropriate mount matrix. |
| */ |
| static int apply_acpi_orientation(struct iio_dev *indio_dev) |
| { |
| struct st_sensor_data *adata = iio_priv(indio_dev); |
| struct acpi_buffer buffer = {ACPI_ALLOCATE_BUFFER, NULL}; |
| struct acpi_device *adev; |
| union acpi_object *ont; |
| union acpi_object *elements; |
| acpi_status status; |
| int ret = -EINVAL; |
| unsigned int val; |
| int i, j; |
| int final_ont[3][3] = { { 0 }, }; |
| |
| /* For some reason, ST's _ONT translation does not apply directly |
| * to the data read from the sensor. Another translation must be |
| * performed first, as described by the matrix below. Perhaps |
| * ST required this specific translation for the first product |
| * where the device was mounted? |
| */ |
| const int default_ont[3][3] = { |
| { 0, 1, 0 }, |
| { -1, 0, 0 }, |
| { 0, 0, -1 }, |
| }; |
| |
| |
| adev = ACPI_COMPANION(indio_dev->dev.parent); |
| if (!adev) |
| return -ENXIO; |
| |
| /* Read _ONT data, which should be a package of 6 integers. */ |
| status = acpi_evaluate_object(adev->handle, "_ONT", NULL, &buffer); |
| if (status == AE_NOT_FOUND) { |
| return -ENXIO; |
| } else if (ACPI_FAILURE(status)) { |
| dev_warn(&indio_dev->dev, "failed to execute _ONT: %d\n", |
| status); |
| return status; |
| } |
| |
| ont = buffer.pointer; |
| if (ont->type != ACPI_TYPE_PACKAGE || ont->package.count != 6) |
| goto out; |
| |
| /* The first 3 integers provide axis order information. |
| * e.g. 0 1 2 would indicate normal X,Y,Z ordering. |
| * e.g. 1 0 2 indicates that data arrives in order Y,X,Z. |
| */ |
| elements = ont->package.elements; |
| for (i = 0; i < 3; i++) { |
| if (elements[i].type != ACPI_TYPE_INTEGER) |
| goto out; |
| |
| val = elements[i].integer.value; |
| if (val > 2) |
| goto out; |
| |
| /* Avoiding full matrix multiplication, we simply reorder the |
| * columns in the default_ont matrix according to the |
| * ordering provided by _ONT. |
| */ |
| final_ont[0][i] = default_ont[0][val]; |
| final_ont[1][i] = default_ont[1][val]; |
| final_ont[2][i] = default_ont[2][val]; |
| } |
| |
| /* The final 3 integers provide sign flip information. |
| * 0 means no change, 1 means flip. |
| * e.g. 0 0 1 means that Z data should be sign-flipped. |
| * This is applied after the axis reordering from above. |
| */ |
| elements += 3; |
| for (i = 0; i < 3; i++) { |
| if (elements[i].type != ACPI_TYPE_INTEGER) |
| goto out; |
| |
| val = elements[i].integer.value; |
| if (val != 0 && val != 1) |
| goto out; |
| if (!val) |
| continue; |
| |
| /* Flip the values in the indicated column */ |
| final_ont[0][i] *= -1; |
| final_ont[1][i] *= -1; |
| final_ont[2][i] *= -1; |
| } |
| |
| /* Convert our integer matrix to a string-based iio_mount_matrix */ |
| for (i = 0; i < 3; i++) { |
| for (j = 0; j < 3; j++) { |
| int matrix_val = final_ont[i][j]; |
| char *str_value; |
| |
| switch (matrix_val) { |
| case -1: |
| str_value = "-1"; |
| break; |
| case 0: |
| str_value = "0"; |
| break; |
| case 1: |
| str_value = "1"; |
| break; |
| default: |
| goto out; |
| } |
| adata->mount_matrix.rotation[i * 3 + j] = str_value; |
| } |
| } |
| |
| ret = 0; |
| dev_info(&indio_dev->dev, "computed mount matrix from ACPI\n"); |
| |
| out: |
| kfree(buffer.pointer); |
| if (ret) |
| dev_dbg(&indio_dev->dev, |
| "failed to apply ACPI orientation data: %d\n", ret); |
| |
| return ret; |
| } |
| #else /* !CONFIG_ACPI */ |
| static int apply_acpi_orientation(struct iio_dev *indio_dev) |
| { |
| return -EINVAL; |
| } |
| #endif |
| |
| /* |
| * st_accel_get_settings() - get sensor settings from device name |
| * @name: device name buffer reference. |
| * |
| * Return: valid reference on success, NULL otherwise. |
| */ |
| const struct st_sensor_settings *st_accel_get_settings(const char *name) |
| { |
| int index = st_sensors_get_settings_index(name, |
| st_accel_sensors_settings, |
| ARRAY_SIZE(st_accel_sensors_settings)); |
| if (index < 0) |
| return NULL; |
| |
| return &st_accel_sensors_settings[index]; |
| } |
| EXPORT_SYMBOL_NS(st_accel_get_settings, IIO_ST_SENSORS); |
| |
| int st_accel_common_probe(struct iio_dev *indio_dev) |
| { |
| struct st_sensor_data *adata = iio_priv(indio_dev); |
| struct device *parent = indio_dev->dev.parent; |
| struct st_sensors_platform_data *pdata = dev_get_platdata(parent); |
| int err; |
| |
| indio_dev->modes = INDIO_DIRECT_MODE; |
| indio_dev->info = &accel_info; |
| |
| err = st_sensors_verify_id(indio_dev); |
| if (err < 0) |
| return err; |
| |
| adata->num_data_channels = ST_ACCEL_NUMBER_DATA_CHANNELS; |
| indio_dev->channels = adata->sensor_settings->ch; |
| indio_dev->num_channels = ST_SENSORS_NUMBER_ALL_CHANNELS; |
| |
| /* |
| * First try specific ACPI methods to retrieve orientation then try the |
| * generic function. |
| */ |
| err = apply_acpi_orientation(indio_dev); |
| if (err) { |
| err = iio_read_mount_matrix(parent, &adata->mount_matrix); |
| if (err) |
| return err; |
| } |
| |
| adata->current_fullscale = &adata->sensor_settings->fs.fs_avl[0]; |
| adata->odr = adata->sensor_settings->odr.odr_avl[0].hz; |
| |
| if (!pdata) |
| pdata = (struct st_sensors_platform_data *)&default_accel_pdata; |
| |
| err = st_sensors_init_sensor(indio_dev, pdata); |
| if (err < 0) |
| return err; |
| |
| err = st_accel_allocate_ring(indio_dev); |
| if (err < 0) |
| return err; |
| |
| if (adata->irq > 0) { |
| err = st_sensors_allocate_trigger(indio_dev, |
| ST_ACCEL_TRIGGER_OPS); |
| if (err < 0) |
| return err; |
| } |
| |
| return devm_iio_device_register(parent, indio_dev); |
| } |
| EXPORT_SYMBOL_NS(st_accel_common_probe, IIO_ST_SENSORS); |
| |
| MODULE_AUTHOR("Denis Ciocca <denis.ciocca@st.com>"); |
| MODULE_DESCRIPTION("STMicroelectronics accelerometers driver"); |
| MODULE_LICENSE("GPL v2"); |
| MODULE_IMPORT_NS(IIO_ST_SENSORS); |