| /* |
| * This file is subject to the terms and conditions of the GNU General |
| * Public License. See the file "COPYING" in the main directory of this |
| * archive for more details. |
| * |
| * Copyright (C) 2000 - 2001 by Kanoj Sarcar (kanoj@sgi.com) |
| * Copyright (C) 2000 - 2001 by Silicon Graphics, Inc. |
| */ |
| #include <linux/kernel.h> |
| #include <linux/init.h> |
| #include <linux/sched.h> |
| #include <linux/smp.h> |
| #include <linux/mm.h> |
| #include <linux/export.h> |
| #include <linux/cpumask.h> |
| #include <asm/cpu.h> |
| #include <asm/io.h> |
| #include <asm/pgtable.h> |
| #include <asm/time.h> |
| #include <asm/sn/types.h> |
| #include <asm/sn/sn0/addrs.h> |
| #include <asm/sn/sn0/hubni.h> |
| #include <asm/sn/sn0/hubio.h> |
| #include <asm/sn/klconfig.h> |
| #include <asm/sn/ioc3.h> |
| #include <asm/mipsregs.h> |
| #include <asm/sn/gda.h> |
| #include <asm/sn/hub.h> |
| #include <asm/sn/intr.h> |
| #include <asm/current.h> |
| #include <asm/processor.h> |
| #include <asm/mmu_context.h> |
| #include <asm/thread_info.h> |
| #include <asm/sn/launch.h> |
| #include <asm/sn/sn_private.h> |
| #include <asm/sn/sn0/ip27.h> |
| #include <asm/sn/mapped_kernel.h> |
| |
| #define CPU_NONE (cpuid_t)-1 |
| |
| static DECLARE_BITMAP(hub_init_mask, MAX_COMPACT_NODES); |
| nasid_t master_nasid = INVALID_NASID; |
| |
| cnodeid_t nasid_to_compact_node[MAX_NASIDS]; |
| nasid_t compact_to_nasid_node[MAX_COMPACT_NODES]; |
| cnodeid_t cpuid_to_compact_node[MAXCPUS]; |
| |
| EXPORT_SYMBOL(nasid_to_compact_node); |
| |
| struct cpuinfo_ip27 sn_cpu_info[NR_CPUS]; |
| EXPORT_SYMBOL_GPL(sn_cpu_info); |
| |
| extern void pcibr_setup(cnodeid_t); |
| |
| static void per_hub_init(cnodeid_t cnode) |
| { |
| struct hub_data *hub = hub_data(cnode); |
| nasid_t nasid = COMPACT_TO_NASID_NODEID(cnode); |
| |
| cpumask_set_cpu(smp_processor_id(), &hub->h_cpus); |
| |
| if (test_and_set_bit(cnode, hub_init_mask)) |
| return; |
| /* |
| * Set CRB timeout at 5ms, (< PI timeout of 10ms) |
| */ |
| REMOTE_HUB_S(nasid, IIO_ICTP, 0x800); |
| REMOTE_HUB_S(nasid, IIO_ICTO, 0xff); |
| |
| hub_rtc_init(cnode); |
| |
| #ifdef CONFIG_REPLICATE_EXHANDLERS |
| /* |
| * If this is not a headless node initialization, |
| * copy over the caliased exception handlers. |
| */ |
| if (get_compact_nodeid() == cnode) { |
| extern char except_vec2_generic, except_vec3_generic; |
| extern void build_tlb_refill_handler(void); |
| |
| memcpy((void *)(CKSEG0 + 0x100), &except_vec2_generic, 0x80); |
| memcpy((void *)(CKSEG0 + 0x180), &except_vec3_generic, 0x80); |
| build_tlb_refill_handler(); |
| memcpy((void *)(CKSEG0 + 0x100), (void *) CKSEG0, 0x80); |
| memcpy((void *)(CKSEG0 + 0x180), &except_vec3_generic, 0x100); |
| __flush_cache_all(); |
| } |
| #endif |
| } |
| |
| void per_cpu_init(void) |
| { |
| int cpu = smp_processor_id(); |
| int slice = LOCAL_HUB_L(PI_CPU_NUM); |
| cnodeid_t cnode = get_compact_nodeid(); |
| struct hub_data *hub = hub_data(cnode); |
| |
| if (test_and_set_bit(slice, &hub->slice_map)) |
| return; |
| |
| clear_c0_status(ST0_IM); |
| |
| per_hub_init(cnode); |
| |
| cpu_time_init(); |
| install_ipi(); |
| |
| /* Install our NMI handler if symmon hasn't installed one. */ |
| install_cpu_nmi_handler(cputoslice(cpu)); |
| |
| enable_percpu_irq(IP27_HUB_PEND0_IRQ, IRQ_TYPE_NONE); |
| enable_percpu_irq(IP27_HUB_PEND1_IRQ, IRQ_TYPE_NONE); |
| } |
| |
| /* |
| * get_nasid() returns the physical node id number of the caller. |
| */ |
| nasid_t |
| get_nasid(void) |
| { |
| return (nasid_t)((LOCAL_HUB_L(NI_STATUS_REV_ID) & NSRI_NODEID_MASK) |
| >> NSRI_NODEID_SHFT); |
| } |
| |
| /* |
| * Map the physical node id to a virtual node id (virtual node ids are contiguous). |
| */ |
| cnodeid_t get_compact_nodeid(void) |
| { |
| return NASID_TO_COMPACT_NODEID(get_nasid()); |
| } |
| |
| extern void ip27_reboot_setup(void); |
| |
| void __init plat_mem_setup(void) |
| { |
| u64 p, e, n_mode; |
| nasid_t nid; |
| |
| ip27_reboot_setup(); |
| |
| /* |
| * hub_rtc init and cpu clock intr enabled for later calibrate_delay. |
| */ |
| nid = get_nasid(); |
| printk("IP27: Running on node %d.\n", nid); |
| |
| p = LOCAL_HUB_L(PI_CPU_PRESENT_A) & 1; |
| e = LOCAL_HUB_L(PI_CPU_ENABLE_A) & 1; |
| printk("Node %d has %s primary CPU%s.\n", nid, |
| p ? "a" : "no", |
| e ? ", CPU is running" : ""); |
| |
| p = LOCAL_HUB_L(PI_CPU_PRESENT_B) & 1; |
| e = LOCAL_HUB_L(PI_CPU_ENABLE_B) & 1; |
| printk("Node %d has %s secondary CPU%s.\n", nid, |
| p ? "a" : "no", |
| e ? ", CPU is running" : ""); |
| |
| /* |
| * Try to catch kernel missconfigurations and give user an |
| * indication what option to select. |
| */ |
| n_mode = LOCAL_HUB_L(NI_STATUS_REV_ID) & NSRI_MORENODES_MASK; |
| printk("Machine is in %c mode.\n", n_mode ? 'N' : 'M'); |
| #ifdef CONFIG_SGI_SN_N_MODE |
| if (!n_mode) |
| panic("Kernel compiled for M mode."); |
| #else |
| if (n_mode) |
| panic("Kernel compiled for N mode."); |
| #endif |
| |
| ioport_resource.start = 0; |
| ioport_resource.end = ~0UL; |
| set_io_port_base(IO_BASE); |
| } |