| // SPDX-License-Identifier: GPL-2.0 |
| /*---------------------------------------------------------------------------+ |
| | fpu_trig.c | |
| | | |
| | Implementation of the FPU "transcendental" functions. | |
| | | |
| | Copyright (C) 1992,1993,1994,1997,1999 | |
| | W. Metzenthen, 22 Parker St, Ormond, Vic 3163, | |
| | Australia. E-mail billm@melbpc.org.au | |
| | | |
| | | |
| +---------------------------------------------------------------------------*/ |
| |
| #include "fpu_system.h" |
| #include "exception.h" |
| #include "fpu_emu.h" |
| #include "status_w.h" |
| #include "control_w.h" |
| #include "reg_constant.h" |
| |
| static void rem_kernel(unsigned long long st0, unsigned long long *y, |
| unsigned long long st1, unsigned long long q, int n); |
| |
| #define BETTER_THAN_486 |
| |
| #define FCOS 4 |
| |
| /* Used only by fptan, fsin, fcos, and fsincos. */ |
| /* This routine produces very accurate results, similar to |
| using a value of pi with more than 128 bits precision. */ |
| /* Limited measurements show no results worse than 64 bit precision |
| except for the results for arguments close to 2^63, where the |
| precision of the result sometimes degrades to about 63.9 bits */ |
| static int trig_arg(FPU_REG *st0_ptr, int even) |
| { |
| FPU_REG tmp; |
| u_char tmptag; |
| unsigned long long q; |
| int old_cw = control_word, saved_status = partial_status; |
| int tag, st0_tag = TAG_Valid; |
| |
| if (exponent(st0_ptr) >= 63) { |
| partial_status |= SW_C2; /* Reduction incomplete. */ |
| return -1; |
| } |
| |
| control_word &= ~CW_RC; |
| control_word |= RC_CHOP; |
| |
| setpositive(st0_ptr); |
| tag = FPU_u_div(st0_ptr, &CONST_PI2, &tmp, PR_64_BITS | RC_CHOP | 0x3f, |
| SIGN_POS); |
| |
| FPU_round_to_int(&tmp, tag); /* Fortunately, this can't overflow |
| to 2^64 */ |
| q = significand(&tmp); |
| if (q) { |
| rem_kernel(significand(st0_ptr), |
| &significand(&tmp), |
| significand(&CONST_PI2), |
| q, exponent(st0_ptr) - exponent(&CONST_PI2)); |
| setexponent16(&tmp, exponent(&CONST_PI2)); |
| st0_tag = FPU_normalize(&tmp); |
| FPU_copy_to_reg0(&tmp, st0_tag); |
| } |
| |
| if ((even && !(q & 1)) || (!even && (q & 1))) { |
| st0_tag = |
| FPU_sub(REV | LOADED | TAG_Valid, (int)&CONST_PI2, |
| FULL_PRECISION); |
| |
| #ifdef BETTER_THAN_486 |
| /* So far, the results are exact but based upon a 64 bit |
| precision approximation to pi/2. The technique used |
| now is equivalent to using an approximation to pi/2 which |
| is accurate to about 128 bits. */ |
| if ((exponent(st0_ptr) <= exponent(&CONST_PI2extra) + 64) |
| || (q > 1)) { |
| /* This code gives the effect of having pi/2 to better than |
| 128 bits precision. */ |
| |
| significand(&tmp) = q + 1; |
| setexponent16(&tmp, 63); |
| FPU_normalize(&tmp); |
| tmptag = |
| FPU_u_mul(&CONST_PI2extra, &tmp, &tmp, |
| FULL_PRECISION, SIGN_POS, |
| exponent(&CONST_PI2extra) + |
| exponent(&tmp)); |
| setsign(&tmp, getsign(&CONST_PI2extra)); |
| st0_tag = FPU_add(&tmp, tmptag, 0, FULL_PRECISION); |
| if (signnegative(st0_ptr)) { |
| /* CONST_PI2extra is negative, so the result of the addition |
| can be negative. This means that the argument is actually |
| in a different quadrant. The correction is always < pi/2, |
| so it can't overflow into yet another quadrant. */ |
| setpositive(st0_ptr); |
| q++; |
| } |
| } |
| #endif /* BETTER_THAN_486 */ |
| } |
| #ifdef BETTER_THAN_486 |
| else { |
| /* So far, the results are exact but based upon a 64 bit |
| precision approximation to pi/2. The technique used |
| now is equivalent to using an approximation to pi/2 which |
| is accurate to about 128 bits. */ |
| if (((q > 0) |
| && (exponent(st0_ptr) <= exponent(&CONST_PI2extra) + 64)) |
| || (q > 1)) { |
| /* This code gives the effect of having p/2 to better than |
| 128 bits precision. */ |
| |
| significand(&tmp) = q; |
| setexponent16(&tmp, 63); |
| FPU_normalize(&tmp); /* This must return TAG_Valid */ |
| tmptag = |
| FPU_u_mul(&CONST_PI2extra, &tmp, &tmp, |
| FULL_PRECISION, SIGN_POS, |
| exponent(&CONST_PI2extra) + |
| exponent(&tmp)); |
| setsign(&tmp, getsign(&CONST_PI2extra)); |
| st0_tag = FPU_sub(LOADED | (tmptag & 0x0f), (int)&tmp, |
| FULL_PRECISION); |
| if ((exponent(st0_ptr) == exponent(&CONST_PI2)) && |
| ((st0_ptr->sigh > CONST_PI2.sigh) |
| || ((st0_ptr->sigh == CONST_PI2.sigh) |
| && (st0_ptr->sigl > CONST_PI2.sigl)))) { |
| /* CONST_PI2extra is negative, so the result of the |
| subtraction can be larger than pi/2. This means |
| that the argument is actually in a different quadrant. |
| The correction is always < pi/2, so it can't overflow |
| into yet another quadrant. */ |
| st0_tag = |
| FPU_sub(REV | LOADED | TAG_Valid, |
| (int)&CONST_PI2, FULL_PRECISION); |
| q++; |
| } |
| } |
| } |
| #endif /* BETTER_THAN_486 */ |
| |
| FPU_settag0(st0_tag); |
| control_word = old_cw; |
| partial_status = saved_status & ~SW_C2; /* Reduction complete. */ |
| |
| return (q & 3) | even; |
| } |
| |
| /* Convert a long to register */ |
| static void convert_l2reg(long const *arg, int deststnr) |
| { |
| int tag; |
| long num = *arg; |
| u_char sign; |
| FPU_REG *dest = &st(deststnr); |
| |
| if (num == 0) { |
| FPU_copy_to_regi(&CONST_Z, TAG_Zero, deststnr); |
| return; |
| } |
| |
| if (num > 0) { |
| sign = SIGN_POS; |
| } else { |
| num = -num; |
| sign = SIGN_NEG; |
| } |
| |
| dest->sigh = num; |
| dest->sigl = 0; |
| setexponent16(dest, 31); |
| tag = FPU_normalize(dest); |
| FPU_settagi(deststnr, tag); |
| setsign(dest, sign); |
| return; |
| } |
| |
| static void single_arg_error(FPU_REG *st0_ptr, u_char st0_tag) |
| { |
| if (st0_tag == TAG_Empty) |
| FPU_stack_underflow(); /* Puts a QNaN in st(0) */ |
| else if (st0_tag == TW_NaN) |
| real_1op_NaN(st0_ptr); /* return with a NaN in st(0) */ |
| #ifdef PARANOID |
| else |
| EXCEPTION(EX_INTERNAL | 0x0112); |
| #endif /* PARANOID */ |
| } |
| |
| static void single_arg_2_error(FPU_REG *st0_ptr, u_char st0_tag) |
| { |
| int isNaN; |
| |
| switch (st0_tag) { |
| case TW_NaN: |
| isNaN = (exponent(st0_ptr) == EXP_OVER) |
| && (st0_ptr->sigh & 0x80000000); |
| if (isNaN && !(st0_ptr->sigh & 0x40000000)) { /* Signaling ? */ |
| EXCEPTION(EX_Invalid); |
| if (control_word & CW_Invalid) { |
| /* The masked response */ |
| /* Convert to a QNaN */ |
| st0_ptr->sigh |= 0x40000000; |
| push(); |
| FPU_copy_to_reg0(st0_ptr, TAG_Special); |
| } |
| } else if (isNaN) { |
| /* A QNaN */ |
| push(); |
| FPU_copy_to_reg0(st0_ptr, TAG_Special); |
| } else { |
| /* pseudoNaN or other unsupported */ |
| EXCEPTION(EX_Invalid); |
| if (control_word & CW_Invalid) { |
| /* The masked response */ |
| FPU_copy_to_reg0(&CONST_QNaN, TAG_Special); |
| push(); |
| FPU_copy_to_reg0(&CONST_QNaN, TAG_Special); |
| } |
| } |
| break; /* return with a NaN in st(0) */ |
| #ifdef PARANOID |
| default: |
| EXCEPTION(EX_INTERNAL | 0x0112); |
| #endif /* PARANOID */ |
| } |
| } |
| |
| /*---------------------------------------------------------------------------*/ |
| |
| static void f2xm1(FPU_REG *st0_ptr, u_char tag) |
| { |
| FPU_REG a; |
| |
| clear_C1(); |
| |
| if (tag == TAG_Valid) { |
| /* For an 80486 FPU, the result is undefined if the arg is >= 1.0 */ |
| if (exponent(st0_ptr) < 0) { |
| denormal_arg: |
| |
| FPU_to_exp16(st0_ptr, &a); |
| |
| /* poly_2xm1(x) requires 0 < st(0) < 1. */ |
| poly_2xm1(getsign(st0_ptr), &a, st0_ptr); |
| } |
| set_precision_flag_up(); /* 80486 appears to always do this */ |
| return; |
| } |
| |
| if (tag == TAG_Zero) |
| return; |
| |
| if (tag == TAG_Special) |
| tag = FPU_Special(st0_ptr); |
| |
| switch (tag) { |
| case TW_Denormal: |
| if (denormal_operand() < 0) |
| return; |
| goto denormal_arg; |
| case TW_Infinity: |
| if (signnegative(st0_ptr)) { |
| /* -infinity gives -1 (p16-10) */ |
| FPU_copy_to_reg0(&CONST_1, TAG_Valid); |
| setnegative(st0_ptr); |
| } |
| return; |
| default: |
| single_arg_error(st0_ptr, tag); |
| } |
| } |
| |
| static void fptan(FPU_REG *st0_ptr, u_char st0_tag) |
| { |
| FPU_REG *st_new_ptr; |
| int q; |
| u_char arg_sign = getsign(st0_ptr); |
| |
| /* Stack underflow has higher priority */ |
| if (st0_tag == TAG_Empty) { |
| FPU_stack_underflow(); /* Puts a QNaN in st(0) */ |
| if (control_word & CW_Invalid) { |
| st_new_ptr = &st(-1); |
| push(); |
| FPU_stack_underflow(); /* Puts a QNaN in the new st(0) */ |
| } |
| return; |
| } |
| |
| if (STACK_OVERFLOW) { |
| FPU_stack_overflow(); |
| return; |
| } |
| |
| if (st0_tag == TAG_Valid) { |
| if (exponent(st0_ptr) > -40) { |
| if ((q = trig_arg(st0_ptr, 0)) == -1) { |
| /* Operand is out of range */ |
| return; |
| } |
| |
| poly_tan(st0_ptr); |
| setsign(st0_ptr, (q & 1) ^ (arg_sign != 0)); |
| set_precision_flag_up(); /* We do not really know if up or down */ |
| } else { |
| /* For a small arg, the result == the argument */ |
| /* Underflow may happen */ |
| |
| denormal_arg: |
| |
| FPU_to_exp16(st0_ptr, st0_ptr); |
| |
| st0_tag = |
| FPU_round(st0_ptr, 1, 0, FULL_PRECISION, arg_sign); |
| FPU_settag0(st0_tag); |
| } |
| push(); |
| FPU_copy_to_reg0(&CONST_1, TAG_Valid); |
| return; |
| } |
| |
| if (st0_tag == TAG_Zero) { |
| push(); |
| FPU_copy_to_reg0(&CONST_1, TAG_Valid); |
| setcc(0); |
| return; |
| } |
| |
| if (st0_tag == TAG_Special) |
| st0_tag = FPU_Special(st0_ptr); |
| |
| if (st0_tag == TW_Denormal) { |
| if (denormal_operand() < 0) |
| return; |
| |
| goto denormal_arg; |
| } |
| |
| if (st0_tag == TW_Infinity) { |
| /* The 80486 treats infinity as an invalid operand */ |
| if (arith_invalid(0) >= 0) { |
| st_new_ptr = &st(-1); |
| push(); |
| arith_invalid(0); |
| } |
| return; |
| } |
| |
| single_arg_2_error(st0_ptr, st0_tag); |
| } |
| |
| static void fxtract(FPU_REG *st0_ptr, u_char st0_tag) |
| { |
| FPU_REG *st_new_ptr; |
| u_char sign; |
| register FPU_REG *st1_ptr = st0_ptr; /* anticipate */ |
| |
| if (STACK_OVERFLOW) { |
| FPU_stack_overflow(); |
| return; |
| } |
| |
| clear_C1(); |
| |
| if (st0_tag == TAG_Valid) { |
| long e; |
| |
| push(); |
| sign = getsign(st1_ptr); |
| reg_copy(st1_ptr, st_new_ptr); |
| setexponent16(st_new_ptr, exponent(st_new_ptr)); |
| |
| denormal_arg: |
| |
| e = exponent16(st_new_ptr); |
| convert_l2reg(&e, 1); |
| setexponentpos(st_new_ptr, 0); |
| setsign(st_new_ptr, sign); |
| FPU_settag0(TAG_Valid); /* Needed if arg was a denormal */ |
| return; |
| } else if (st0_tag == TAG_Zero) { |
| sign = getsign(st0_ptr); |
| |
| if (FPU_divide_by_zero(0, SIGN_NEG) < 0) |
| return; |
| |
| push(); |
| FPU_copy_to_reg0(&CONST_Z, TAG_Zero); |
| setsign(st_new_ptr, sign); |
| return; |
| } |
| |
| if (st0_tag == TAG_Special) |
| st0_tag = FPU_Special(st0_ptr); |
| |
| if (st0_tag == TW_Denormal) { |
| if (denormal_operand() < 0) |
| return; |
| |
| push(); |
| sign = getsign(st1_ptr); |
| FPU_to_exp16(st1_ptr, st_new_ptr); |
| goto denormal_arg; |
| } else if (st0_tag == TW_Infinity) { |
| sign = getsign(st0_ptr); |
| setpositive(st0_ptr); |
| push(); |
| FPU_copy_to_reg0(&CONST_INF, TAG_Special); |
| setsign(st_new_ptr, sign); |
| return; |
| } else if (st0_tag == TW_NaN) { |
| if (real_1op_NaN(st0_ptr) < 0) |
| return; |
| |
| push(); |
| FPU_copy_to_reg0(st0_ptr, TAG_Special); |
| return; |
| } else if (st0_tag == TAG_Empty) { |
| /* Is this the correct behaviour? */ |
| if (control_word & EX_Invalid) { |
| FPU_stack_underflow(); |
| push(); |
| FPU_stack_underflow(); |
| } else |
| EXCEPTION(EX_StackUnder); |
| } |
| #ifdef PARANOID |
| else |
| EXCEPTION(EX_INTERNAL | 0x119); |
| #endif /* PARANOID */ |
| } |
| |
| static void fdecstp(void) |
| { |
| clear_C1(); |
| top--; |
| } |
| |
| static void fincstp(void) |
| { |
| clear_C1(); |
| top++; |
| } |
| |
| static void fsqrt_(FPU_REG *st0_ptr, u_char st0_tag) |
| { |
| int expon; |
| |
| clear_C1(); |
| |
| if (st0_tag == TAG_Valid) { |
| u_char tag; |
| |
| if (signnegative(st0_ptr)) { |
| arith_invalid(0); /* sqrt(negative) is invalid */ |
| return; |
| } |
| |
| /* make st(0) in [1.0 .. 4.0) */ |
| expon = exponent(st0_ptr); |
| |
| denormal_arg: |
| |
| setexponent16(st0_ptr, (expon & 1)); |
| |
| /* Do the computation, the sign of the result will be positive. */ |
| tag = wm_sqrt(st0_ptr, 0, 0, control_word, SIGN_POS); |
| addexponent(st0_ptr, expon >> 1); |
| FPU_settag0(tag); |
| return; |
| } |
| |
| if (st0_tag == TAG_Zero) |
| return; |
| |
| if (st0_tag == TAG_Special) |
| st0_tag = FPU_Special(st0_ptr); |
| |
| if (st0_tag == TW_Infinity) { |
| if (signnegative(st0_ptr)) |
| arith_invalid(0); /* sqrt(-Infinity) is invalid */ |
| return; |
| } else if (st0_tag == TW_Denormal) { |
| if (signnegative(st0_ptr)) { |
| arith_invalid(0); /* sqrt(negative) is invalid */ |
| return; |
| } |
| |
| if (denormal_operand() < 0) |
| return; |
| |
| FPU_to_exp16(st0_ptr, st0_ptr); |
| |
| expon = exponent16(st0_ptr); |
| |
| goto denormal_arg; |
| } |
| |
| single_arg_error(st0_ptr, st0_tag); |
| |
| } |
| |
| static void frndint_(FPU_REG *st0_ptr, u_char st0_tag) |
| { |
| int flags, tag; |
| |
| if (st0_tag == TAG_Valid) { |
| u_char sign; |
| |
| denormal_arg: |
| |
| sign = getsign(st0_ptr); |
| |
| if (exponent(st0_ptr) > 63) |
| return; |
| |
| if (st0_tag == TW_Denormal) { |
| if (denormal_operand() < 0) |
| return; |
| } |
| |
| /* Fortunately, this can't overflow to 2^64 */ |
| if ((flags = FPU_round_to_int(st0_ptr, st0_tag))) |
| set_precision_flag(flags); |
| |
| setexponent16(st0_ptr, 63); |
| tag = FPU_normalize(st0_ptr); |
| setsign(st0_ptr, sign); |
| FPU_settag0(tag); |
| return; |
| } |
| |
| if (st0_tag == TAG_Zero) |
| return; |
| |
| if (st0_tag == TAG_Special) |
| st0_tag = FPU_Special(st0_ptr); |
| |
| if (st0_tag == TW_Denormal) |
| goto denormal_arg; |
| else if (st0_tag == TW_Infinity) |
| return; |
| else |
| single_arg_error(st0_ptr, st0_tag); |
| } |
| |
| static int fsin(FPU_REG *st0_ptr, u_char tag) |
| { |
| u_char arg_sign = getsign(st0_ptr); |
| |
| if (tag == TAG_Valid) { |
| int q; |
| |
| if (exponent(st0_ptr) > -40) { |
| if ((q = trig_arg(st0_ptr, 0)) == -1) { |
| /* Operand is out of range */ |
| return 1; |
| } |
| |
| poly_sine(st0_ptr); |
| |
| if (q & 2) |
| changesign(st0_ptr); |
| |
| setsign(st0_ptr, getsign(st0_ptr) ^ arg_sign); |
| |
| /* We do not really know if up or down */ |
| set_precision_flag_up(); |
| return 0; |
| } else { |
| /* For a small arg, the result == the argument */ |
| set_precision_flag_up(); /* Must be up. */ |
| return 0; |
| } |
| } |
| |
| if (tag == TAG_Zero) { |
| setcc(0); |
| return 0; |
| } |
| |
| if (tag == TAG_Special) |
| tag = FPU_Special(st0_ptr); |
| |
| if (tag == TW_Denormal) { |
| if (denormal_operand() < 0) |
| return 1; |
| |
| /* For a small arg, the result == the argument */ |
| /* Underflow may happen */ |
| FPU_to_exp16(st0_ptr, st0_ptr); |
| |
| tag = FPU_round(st0_ptr, 1, 0, FULL_PRECISION, arg_sign); |
| |
| FPU_settag0(tag); |
| |
| return 0; |
| } else if (tag == TW_Infinity) { |
| /* The 80486 treats infinity as an invalid operand */ |
| arith_invalid(0); |
| return 1; |
| } else { |
| single_arg_error(st0_ptr, tag); |
| return 1; |
| } |
| } |
| |
| static int f_cos(FPU_REG *st0_ptr, u_char tag) |
| { |
| u_char st0_sign; |
| |
| st0_sign = getsign(st0_ptr); |
| |
| if (tag == TAG_Valid) { |
| int q; |
| |
| if (exponent(st0_ptr) > -40) { |
| if ((exponent(st0_ptr) < 0) |
| || ((exponent(st0_ptr) == 0) |
| && (significand(st0_ptr) <= |
| 0xc90fdaa22168c234LL))) { |
| poly_cos(st0_ptr); |
| |
| /* We do not really know if up or down */ |
| set_precision_flag_down(); |
| |
| return 0; |
| } else if ((q = trig_arg(st0_ptr, FCOS)) != -1) { |
| poly_sine(st0_ptr); |
| |
| if ((q + 1) & 2) |
| changesign(st0_ptr); |
| |
| /* We do not really know if up or down */ |
| set_precision_flag_down(); |
| |
| return 0; |
| } else { |
| /* Operand is out of range */ |
| return 1; |
| } |
| } else { |
| denormal_arg: |
| |
| setcc(0); |
| FPU_copy_to_reg0(&CONST_1, TAG_Valid); |
| #ifdef PECULIAR_486 |
| set_precision_flag_down(); /* 80486 appears to do this. */ |
| #else |
| set_precision_flag_up(); /* Must be up. */ |
| #endif /* PECULIAR_486 */ |
| return 0; |
| } |
| } else if (tag == TAG_Zero) { |
| FPU_copy_to_reg0(&CONST_1, TAG_Valid); |
| setcc(0); |
| return 0; |
| } |
| |
| if (tag == TAG_Special) |
| tag = FPU_Special(st0_ptr); |
| |
| if (tag == TW_Denormal) { |
| if (denormal_operand() < 0) |
| return 1; |
| |
| goto denormal_arg; |
| } else if (tag == TW_Infinity) { |
| /* The 80486 treats infinity as an invalid operand */ |
| arith_invalid(0); |
| return 1; |
| } else { |
| single_arg_error(st0_ptr, tag); /* requires st0_ptr == &st(0) */ |
| return 1; |
| } |
| } |
| |
| static void fcos(FPU_REG *st0_ptr, u_char st0_tag) |
| { |
| f_cos(st0_ptr, st0_tag); |
| } |
| |
| static void fsincos(FPU_REG *st0_ptr, u_char st0_tag) |
| { |
| FPU_REG *st_new_ptr; |
| FPU_REG arg; |
| u_char tag; |
| |
| /* Stack underflow has higher priority */ |
| if (st0_tag == TAG_Empty) { |
| FPU_stack_underflow(); /* Puts a QNaN in st(0) */ |
| if (control_word & CW_Invalid) { |
| st_new_ptr = &st(-1); |
| push(); |
| FPU_stack_underflow(); /* Puts a QNaN in the new st(0) */ |
| } |
| return; |
| } |
| |
| if (STACK_OVERFLOW) { |
| FPU_stack_overflow(); |
| return; |
| } |
| |
| if (st0_tag == TAG_Special) |
| tag = FPU_Special(st0_ptr); |
| else |
| tag = st0_tag; |
| |
| if (tag == TW_NaN) { |
| single_arg_2_error(st0_ptr, TW_NaN); |
| return; |
| } else if (tag == TW_Infinity) { |
| /* The 80486 treats infinity as an invalid operand */ |
| if (arith_invalid(0) >= 0) { |
| /* Masked response */ |
| push(); |
| arith_invalid(0); |
| } |
| return; |
| } |
| |
| reg_copy(st0_ptr, &arg); |
| if (!fsin(st0_ptr, st0_tag)) { |
| push(); |
| FPU_copy_to_reg0(&arg, st0_tag); |
| f_cos(&st(0), st0_tag); |
| } else { |
| /* An error, so restore st(0) */ |
| FPU_copy_to_reg0(&arg, st0_tag); |
| } |
| } |
| |
| /*---------------------------------------------------------------------------*/ |
| /* The following all require two arguments: st(0) and st(1) */ |
| |
| /* A lean, mean kernel for the fprem instructions. This relies upon |
| the division and rounding to an integer in do_fprem giving an |
| exact result. Because of this, rem_kernel() needs to deal only with |
| the least significant 64 bits, the more significant bits of the |
| result must be zero. |
| */ |
| static void rem_kernel(unsigned long long st0, unsigned long long *y, |
| unsigned long long st1, unsigned long long q, int n) |
| { |
| int dummy; |
| unsigned long long x; |
| |
| x = st0 << n; |
| |
| /* Do the required multiplication and subtraction in the one operation */ |
| |
| /* lsw x -= lsw st1 * lsw q */ |
| asm volatile ("mull %4; subl %%eax,%0; sbbl %%edx,%1":"=m" |
| (((unsigned *)&x)[0]), "=m"(((unsigned *)&x)[1]), |
| "=a"(dummy) |
| :"2"(((unsigned *)&st1)[0]), "m"(((unsigned *)&q)[0]) |
| :"%dx"); |
| /* msw x -= msw st1 * lsw q */ |
| asm volatile ("mull %3; subl %%eax,%0":"=m" (((unsigned *)&x)[1]), |
| "=a"(dummy) |
| :"1"(((unsigned *)&st1)[1]), "m"(((unsigned *)&q)[0]) |
| :"%dx"); |
| /* msw x -= lsw st1 * msw q */ |
| asm volatile ("mull %3; subl %%eax,%0":"=m" (((unsigned *)&x)[1]), |
| "=a"(dummy) |
| :"1"(((unsigned *)&st1)[0]), "m"(((unsigned *)&q)[1]) |
| :"%dx"); |
| |
| *y = x; |
| } |
| |
| /* Remainder of st(0) / st(1) */ |
| /* This routine produces exact results, i.e. there is never any |
| rounding or truncation, etc of the result. */ |
| static void do_fprem(FPU_REG *st0_ptr, u_char st0_tag, int round) |
| { |
| FPU_REG *st1_ptr = &st(1); |
| u_char st1_tag = FPU_gettagi(1); |
| |
| if (!((st0_tag ^ TAG_Valid) | (st1_tag ^ TAG_Valid))) { |
| FPU_REG tmp, st0, st1; |
| u_char st0_sign, st1_sign; |
| u_char tmptag; |
| int tag; |
| int old_cw; |
| int expdif; |
| long long q; |
| unsigned short saved_status; |
| int cc; |
| |
| fprem_valid: |
| /* Convert registers for internal use. */ |
| st0_sign = FPU_to_exp16(st0_ptr, &st0); |
| st1_sign = FPU_to_exp16(st1_ptr, &st1); |
| expdif = exponent16(&st0) - exponent16(&st1); |
| |
| old_cw = control_word; |
| cc = 0; |
| |
| /* We want the status following the denorm tests, but don't want |
| the status changed by the arithmetic operations. */ |
| saved_status = partial_status; |
| control_word &= ~CW_RC; |
| control_word |= RC_CHOP; |
| |
| if (expdif < 64) { |
| /* This should be the most common case */ |
| |
| if (expdif > -2) { |
| u_char sign = st0_sign ^ st1_sign; |
| tag = FPU_u_div(&st0, &st1, &tmp, |
| PR_64_BITS | RC_CHOP | 0x3f, |
| sign); |
| setsign(&tmp, sign); |
| |
| if (exponent(&tmp) >= 0) { |
| FPU_round_to_int(&tmp, tag); /* Fortunately, this can't |
| overflow to 2^64 */ |
| q = significand(&tmp); |
| |
| rem_kernel(significand(&st0), |
| &significand(&tmp), |
| significand(&st1), |
| q, expdif); |
| |
| setexponent16(&tmp, exponent16(&st1)); |
| } else { |
| reg_copy(&st0, &tmp); |
| q = 0; |
| } |
| |
| if ((round == RC_RND) |
| && (tmp.sigh & 0xc0000000)) { |
| /* We may need to subtract st(1) once more, |
| to get a result <= 1/2 of st(1). */ |
| unsigned long long x; |
| expdif = |
| exponent16(&st1) - exponent16(&tmp); |
| if (expdif <= 1) { |
| if (expdif == 0) |
| x = significand(&st1) - |
| significand(&tmp); |
| else /* expdif is 1 */ |
| x = (significand(&st1) |
| << 1) - |
| significand(&tmp); |
| if ((x < significand(&tmp)) || |
| /* or equi-distant (from 0 & st(1)) and q is odd */ |
| ((x == significand(&tmp)) |
| && (q & 1))) { |
| st0_sign = !st0_sign; |
| significand(&tmp) = x; |
| q++; |
| } |
| } |
| } |
| |
| if (q & 4) |
| cc |= SW_C0; |
| if (q & 2) |
| cc |= SW_C3; |
| if (q & 1) |
| cc |= SW_C1; |
| } else { |
| control_word = old_cw; |
| setcc(0); |
| return; |
| } |
| } else { |
| /* There is a large exponent difference ( >= 64 ) */ |
| /* To make much sense, the code in this section should |
| be done at high precision. */ |
| int exp_1, N; |
| u_char sign; |
| |
| /* prevent overflow here */ |
| /* N is 'a number between 32 and 63' (p26-113) */ |
| reg_copy(&st0, &tmp); |
| tmptag = st0_tag; |
| N = (expdif & 0x0000001f) + 32; /* This choice gives results |
| identical to an AMD 486 */ |
| setexponent16(&tmp, N); |
| exp_1 = exponent16(&st1); |
| setexponent16(&st1, 0); |
| expdif -= N; |
| |
| sign = getsign(&tmp) ^ st1_sign; |
| tag = |
| FPU_u_div(&tmp, &st1, &tmp, |
| PR_64_BITS | RC_CHOP | 0x3f, sign); |
| setsign(&tmp, sign); |
| |
| FPU_round_to_int(&tmp, tag); /* Fortunately, this can't |
| overflow to 2^64 */ |
| |
| rem_kernel(significand(&st0), |
| &significand(&tmp), |
| significand(&st1), |
| significand(&tmp), exponent(&tmp) |
| ); |
| setexponent16(&tmp, exp_1 + expdif); |
| |
| /* It is possible for the operation to be complete here. |
| What does the IEEE standard say? The Intel 80486 manual |
| implies that the operation will never be completed at this |
| point, and the behaviour of a real 80486 confirms this. |
| */ |
| if (!(tmp.sigh | tmp.sigl)) { |
| /* The result is zero */ |
| control_word = old_cw; |
| partial_status = saved_status; |
| FPU_copy_to_reg0(&CONST_Z, TAG_Zero); |
| setsign(&st0, st0_sign); |
| #ifdef PECULIAR_486 |
| setcc(SW_C2); |
| #else |
| setcc(0); |
| #endif /* PECULIAR_486 */ |
| return; |
| } |
| cc = SW_C2; |
| } |
| |
| control_word = old_cw; |
| partial_status = saved_status; |
| tag = FPU_normalize_nuo(&tmp); |
| reg_copy(&tmp, st0_ptr); |
| |
| /* The only condition to be looked for is underflow, |
| and it can occur here only if underflow is unmasked. */ |
| if ((exponent16(&tmp) <= EXP_UNDER) && (tag != TAG_Zero) |
| && !(control_word & CW_Underflow)) { |
| setcc(cc); |
| tag = arith_underflow(st0_ptr); |
| setsign(st0_ptr, st0_sign); |
| FPU_settag0(tag); |
| return; |
| } else if ((exponent16(&tmp) > EXP_UNDER) || (tag == TAG_Zero)) { |
| stdexp(st0_ptr); |
| setsign(st0_ptr, st0_sign); |
| } else { |
| tag = |
| FPU_round(st0_ptr, 0, 0, FULL_PRECISION, st0_sign); |
| } |
| FPU_settag0(tag); |
| setcc(cc); |
| |
| return; |
| } |
| |
| if (st0_tag == TAG_Special) |
| st0_tag = FPU_Special(st0_ptr); |
| if (st1_tag == TAG_Special) |
| st1_tag = FPU_Special(st1_ptr); |
| |
| if (((st0_tag == TAG_Valid) && (st1_tag == TW_Denormal)) |
| || ((st0_tag == TW_Denormal) && (st1_tag == TAG_Valid)) |
| || ((st0_tag == TW_Denormal) && (st1_tag == TW_Denormal))) { |
| if (denormal_operand() < 0) |
| return; |
| goto fprem_valid; |
| } else if ((st0_tag == TAG_Empty) || (st1_tag == TAG_Empty)) { |
| FPU_stack_underflow(); |
| return; |
| } else if (st0_tag == TAG_Zero) { |
| if (st1_tag == TAG_Valid) { |
| setcc(0); |
| return; |
| } else if (st1_tag == TW_Denormal) { |
| if (denormal_operand() < 0) |
| return; |
| setcc(0); |
| return; |
| } else if (st1_tag == TAG_Zero) { |
| arith_invalid(0); |
| return; |
| } /* fprem(?,0) always invalid */ |
| else if (st1_tag == TW_Infinity) { |
| setcc(0); |
| return; |
| } |
| } else if ((st0_tag == TAG_Valid) || (st0_tag == TW_Denormal)) { |
| if (st1_tag == TAG_Zero) { |
| arith_invalid(0); /* fprem(Valid,Zero) is invalid */ |
| return; |
| } else if (st1_tag != TW_NaN) { |
| if (((st0_tag == TW_Denormal) |
| || (st1_tag == TW_Denormal)) |
| && (denormal_operand() < 0)) |
| return; |
| |
| if (st1_tag == TW_Infinity) { |
| /* fprem(Valid,Infinity) is o.k. */ |
| setcc(0); |
| return; |
| } |
| } |
| } else if (st0_tag == TW_Infinity) { |
| if (st1_tag != TW_NaN) { |
| arith_invalid(0); /* fprem(Infinity,?) is invalid */ |
| return; |
| } |
| } |
| |
| /* One of the registers must contain a NaN if we got here. */ |
| |
| #ifdef PARANOID |
| if ((st0_tag != TW_NaN) && (st1_tag != TW_NaN)) |
| EXCEPTION(EX_INTERNAL | 0x118); |
| #endif /* PARANOID */ |
| |
| real_2op_NaN(st1_ptr, st1_tag, 0, st1_ptr); |
| |
| } |
| |
| /* ST(1) <- ST(1) * log ST; pop ST */ |
| static void fyl2x(FPU_REG *st0_ptr, u_char st0_tag) |
| { |
| FPU_REG *st1_ptr = &st(1), exponent; |
| u_char st1_tag = FPU_gettagi(1); |
| u_char sign; |
| int e, tag; |
| |
| clear_C1(); |
| |
| if ((st0_tag == TAG_Valid) && (st1_tag == TAG_Valid)) { |
| both_valid: |
| /* Both regs are Valid or Denormal */ |
| if (signpositive(st0_ptr)) { |
| if (st0_tag == TW_Denormal) |
| FPU_to_exp16(st0_ptr, st0_ptr); |
| else |
| /* Convert st(0) for internal use. */ |
| setexponent16(st0_ptr, exponent(st0_ptr)); |
| |
| if ((st0_ptr->sigh == 0x80000000) |
| && (st0_ptr->sigl == 0)) { |
| /* Special case. The result can be precise. */ |
| u_char esign; |
| e = exponent16(st0_ptr); |
| if (e >= 0) { |
| exponent.sigh = e; |
| esign = SIGN_POS; |
| } else { |
| exponent.sigh = -e; |
| esign = SIGN_NEG; |
| } |
| exponent.sigl = 0; |
| setexponent16(&exponent, 31); |
| tag = FPU_normalize_nuo(&exponent); |
| stdexp(&exponent); |
| setsign(&exponent, esign); |
| tag = |
| FPU_mul(&exponent, tag, 1, FULL_PRECISION); |
| if (tag >= 0) |
| FPU_settagi(1, tag); |
| } else { |
| /* The usual case */ |
| sign = getsign(st1_ptr); |
| if (st1_tag == TW_Denormal) |
| FPU_to_exp16(st1_ptr, st1_ptr); |
| else |
| /* Convert st(1) for internal use. */ |
| setexponent16(st1_ptr, |
| exponent(st1_ptr)); |
| poly_l2(st0_ptr, st1_ptr, sign); |
| } |
| } else { |
| /* negative */ |
| if (arith_invalid(1) < 0) |
| return; |
| } |
| |
| FPU_pop(); |
| |
| return; |
| } |
| |
| if (st0_tag == TAG_Special) |
| st0_tag = FPU_Special(st0_ptr); |
| if (st1_tag == TAG_Special) |
| st1_tag = FPU_Special(st1_ptr); |
| |
| if ((st0_tag == TAG_Empty) || (st1_tag == TAG_Empty)) { |
| FPU_stack_underflow_pop(1); |
| return; |
| } else if ((st0_tag <= TW_Denormal) && (st1_tag <= TW_Denormal)) { |
| if (st0_tag == TAG_Zero) { |
| if (st1_tag == TAG_Zero) { |
| /* Both args zero is invalid */ |
| if (arith_invalid(1) < 0) |
| return; |
| } else { |
| u_char sign; |
| sign = getsign(st1_ptr) ^ SIGN_NEG; |
| if (FPU_divide_by_zero(1, sign) < 0) |
| return; |
| |
| setsign(st1_ptr, sign); |
| } |
| } else if (st1_tag == TAG_Zero) { |
| /* st(1) contains zero, st(0) valid <> 0 */ |
| /* Zero is the valid answer */ |
| sign = getsign(st1_ptr); |
| |
| if (signnegative(st0_ptr)) { |
| /* log(negative) */ |
| if (arith_invalid(1) < 0) |
| return; |
| } else if ((st0_tag == TW_Denormal) |
| && (denormal_operand() < 0)) |
| return; |
| else { |
| if (exponent(st0_ptr) < 0) |
| sign ^= SIGN_NEG; |
| |
| FPU_copy_to_reg1(&CONST_Z, TAG_Zero); |
| setsign(st1_ptr, sign); |
| } |
| } else { |
| /* One or both operands are denormals. */ |
| if (denormal_operand() < 0) |
| return; |
| goto both_valid; |
| } |
| } else if ((st0_tag == TW_NaN) || (st1_tag == TW_NaN)) { |
| if (real_2op_NaN(st0_ptr, st0_tag, 1, st0_ptr) < 0) |
| return; |
| } |
| /* One or both arg must be an infinity */ |
| else if (st0_tag == TW_Infinity) { |
| if ((signnegative(st0_ptr)) || (st1_tag == TAG_Zero)) { |
| /* log(-infinity) or 0*log(infinity) */ |
| if (arith_invalid(1) < 0) |
| return; |
| } else { |
| u_char sign = getsign(st1_ptr); |
| |
| if ((st1_tag == TW_Denormal) |
| && (denormal_operand() < 0)) |
| return; |
| |
| FPU_copy_to_reg1(&CONST_INF, TAG_Special); |
| setsign(st1_ptr, sign); |
| } |
| } |
| /* st(1) must be infinity here */ |
| else if (((st0_tag == TAG_Valid) || (st0_tag == TW_Denormal)) |
| && (signpositive(st0_ptr))) { |
| if (exponent(st0_ptr) >= 0) { |
| if ((exponent(st0_ptr) == 0) && |
| (st0_ptr->sigh == 0x80000000) && |
| (st0_ptr->sigl == 0)) { |
| /* st(0) holds 1.0 */ |
| /* infinity*log(1) */ |
| if (arith_invalid(1) < 0) |
| return; |
| } |
| /* else st(0) is positive and > 1.0 */ |
| } else { |
| /* st(0) is positive and < 1.0 */ |
| |
| if ((st0_tag == TW_Denormal) |
| && (denormal_operand() < 0)) |
| return; |
| |
| changesign(st1_ptr); |
| } |
| } else { |
| /* st(0) must be zero or negative */ |
| if (st0_tag == TAG_Zero) { |
| /* This should be invalid, but a real 80486 is happy with it. */ |
| |
| #ifndef PECULIAR_486 |
| sign = getsign(st1_ptr); |
| if (FPU_divide_by_zero(1, sign) < 0) |
| return; |
| #endif /* PECULIAR_486 */ |
| |
| changesign(st1_ptr); |
| } else if (arith_invalid(1) < 0) /* log(negative) */ |
| return; |
| } |
| |
| FPU_pop(); |
| } |
| |
| static void fpatan(FPU_REG *st0_ptr, u_char st0_tag) |
| { |
| FPU_REG *st1_ptr = &st(1); |
| u_char st1_tag = FPU_gettagi(1); |
| int tag; |
| |
| clear_C1(); |
| if (!((st0_tag ^ TAG_Valid) | (st1_tag ^ TAG_Valid))) { |
| valid_atan: |
| |
| poly_atan(st0_ptr, st0_tag, st1_ptr, st1_tag); |
| |
| FPU_pop(); |
| |
| return; |
| } |
| |
| if (st0_tag == TAG_Special) |
| st0_tag = FPU_Special(st0_ptr); |
| if (st1_tag == TAG_Special) |
| st1_tag = FPU_Special(st1_ptr); |
| |
| if (((st0_tag == TAG_Valid) && (st1_tag == TW_Denormal)) |
| || ((st0_tag == TW_Denormal) && (st1_tag == TAG_Valid)) |
| || ((st0_tag == TW_Denormal) && (st1_tag == TW_Denormal))) { |
| if (denormal_operand() < 0) |
| return; |
| |
| goto valid_atan; |
| } else if ((st0_tag == TAG_Empty) || (st1_tag == TAG_Empty)) { |
| FPU_stack_underflow_pop(1); |
| return; |
| } else if ((st0_tag == TW_NaN) || (st1_tag == TW_NaN)) { |
| if (real_2op_NaN(st0_ptr, st0_tag, 1, st0_ptr) >= 0) |
| FPU_pop(); |
| return; |
| } else if ((st0_tag == TW_Infinity) || (st1_tag == TW_Infinity)) { |
| u_char sign = getsign(st1_ptr); |
| if (st0_tag == TW_Infinity) { |
| if (st1_tag == TW_Infinity) { |
| if (signpositive(st0_ptr)) { |
| FPU_copy_to_reg1(&CONST_PI4, TAG_Valid); |
| } else { |
| setpositive(st1_ptr); |
| tag = |
| FPU_u_add(&CONST_PI4, &CONST_PI2, |
| st1_ptr, FULL_PRECISION, |
| SIGN_POS, |
| exponent(&CONST_PI4), |
| exponent(&CONST_PI2)); |
| if (tag >= 0) |
| FPU_settagi(1, tag); |
| } |
| } else { |
| if ((st1_tag == TW_Denormal) |
| && (denormal_operand() < 0)) |
| return; |
| |
| if (signpositive(st0_ptr)) { |
| FPU_copy_to_reg1(&CONST_Z, TAG_Zero); |
| setsign(st1_ptr, sign); /* An 80486 preserves the sign */ |
| FPU_pop(); |
| return; |
| } else { |
| FPU_copy_to_reg1(&CONST_PI, TAG_Valid); |
| } |
| } |
| } else { |
| /* st(1) is infinity, st(0) not infinity */ |
| if ((st0_tag == TW_Denormal) |
| && (denormal_operand() < 0)) |
| return; |
| |
| FPU_copy_to_reg1(&CONST_PI2, TAG_Valid); |
| } |
| setsign(st1_ptr, sign); |
| } else if (st1_tag == TAG_Zero) { |
| /* st(0) must be valid or zero */ |
| u_char sign = getsign(st1_ptr); |
| |
| if ((st0_tag == TW_Denormal) && (denormal_operand() < 0)) |
| return; |
| |
| if (signpositive(st0_ptr)) { |
| /* An 80486 preserves the sign */ |
| FPU_pop(); |
| return; |
| } |
| |
| FPU_copy_to_reg1(&CONST_PI, TAG_Valid); |
| setsign(st1_ptr, sign); |
| } else if (st0_tag == TAG_Zero) { |
| /* st(1) must be TAG_Valid here */ |
| u_char sign = getsign(st1_ptr); |
| |
| if ((st1_tag == TW_Denormal) && (denormal_operand() < 0)) |
| return; |
| |
| FPU_copy_to_reg1(&CONST_PI2, TAG_Valid); |
| setsign(st1_ptr, sign); |
| } |
| #ifdef PARANOID |
| else |
| EXCEPTION(EX_INTERNAL | 0x125); |
| #endif /* PARANOID */ |
| |
| FPU_pop(); |
| set_precision_flag_up(); /* We do not really know if up or down */ |
| } |
| |
| static void fprem(FPU_REG *st0_ptr, u_char st0_tag) |
| { |
| do_fprem(st0_ptr, st0_tag, RC_CHOP); |
| } |
| |
| static void fprem1(FPU_REG *st0_ptr, u_char st0_tag) |
| { |
| do_fprem(st0_ptr, st0_tag, RC_RND); |
| } |
| |
| static void fyl2xp1(FPU_REG *st0_ptr, u_char st0_tag) |
| { |
| u_char sign, sign1; |
| FPU_REG *st1_ptr = &st(1), a, b; |
| u_char st1_tag = FPU_gettagi(1); |
| |
| clear_C1(); |
| if (!((st0_tag ^ TAG_Valid) | (st1_tag ^ TAG_Valid))) { |
| valid_yl2xp1: |
| |
| sign = getsign(st0_ptr); |
| sign1 = getsign(st1_ptr); |
| |
| FPU_to_exp16(st0_ptr, &a); |
| FPU_to_exp16(st1_ptr, &b); |
| |
| if (poly_l2p1(sign, sign1, &a, &b, st1_ptr)) |
| return; |
| |
| FPU_pop(); |
| return; |
| } |
| |
| if (st0_tag == TAG_Special) |
| st0_tag = FPU_Special(st0_ptr); |
| if (st1_tag == TAG_Special) |
| st1_tag = FPU_Special(st1_ptr); |
| |
| if (((st0_tag == TAG_Valid) && (st1_tag == TW_Denormal)) |
| || ((st0_tag == TW_Denormal) && (st1_tag == TAG_Valid)) |
| || ((st0_tag == TW_Denormal) && (st1_tag == TW_Denormal))) { |
| if (denormal_operand() < 0) |
| return; |
| |
| goto valid_yl2xp1; |
| } else if ((st0_tag == TAG_Empty) | (st1_tag == TAG_Empty)) { |
| FPU_stack_underflow_pop(1); |
| return; |
| } else if (st0_tag == TAG_Zero) { |
| switch (st1_tag) { |
| case TW_Denormal: |
| if (denormal_operand() < 0) |
| return; |
| /* fall through */ |
| case TAG_Zero: |
| case TAG_Valid: |
| setsign(st0_ptr, getsign(st0_ptr) ^ getsign(st1_ptr)); |
| FPU_copy_to_reg1(st0_ptr, st0_tag); |
| break; |
| |
| case TW_Infinity: |
| /* Infinity*log(1) */ |
| if (arith_invalid(1) < 0) |
| return; |
| break; |
| |
| case TW_NaN: |
| if (real_2op_NaN(st0_ptr, st0_tag, 1, st0_ptr) < 0) |
| return; |
| break; |
| |
| default: |
| #ifdef PARANOID |
| EXCEPTION(EX_INTERNAL | 0x116); |
| return; |
| #endif /* PARANOID */ |
| break; |
| } |
| } else if ((st0_tag == TAG_Valid) || (st0_tag == TW_Denormal)) { |
| switch (st1_tag) { |
| case TAG_Zero: |
| if (signnegative(st0_ptr)) { |
| if (exponent(st0_ptr) >= 0) { |
| /* st(0) holds <= -1.0 */ |
| #ifdef PECULIAR_486 /* Stupid 80486 doesn't worry about log(negative). */ |
| changesign(st1_ptr); |
| #else |
| if (arith_invalid(1) < 0) |
| return; |
| #endif /* PECULIAR_486 */ |
| } else if ((st0_tag == TW_Denormal) |
| && (denormal_operand() < 0)) |
| return; |
| else |
| changesign(st1_ptr); |
| } else if ((st0_tag == TW_Denormal) |
| && (denormal_operand() < 0)) |
| return; |
| break; |
| |
| case TW_Infinity: |
| if (signnegative(st0_ptr)) { |
| if ((exponent(st0_ptr) >= 0) && |
| !((st0_ptr->sigh == 0x80000000) && |
| (st0_ptr->sigl == 0))) { |
| /* st(0) holds < -1.0 */ |
| #ifdef PECULIAR_486 /* Stupid 80486 doesn't worry about log(negative). */ |
| changesign(st1_ptr); |
| #else |
| if (arith_invalid(1) < 0) |
| return; |
| #endif /* PECULIAR_486 */ |
| } else if ((st0_tag == TW_Denormal) |
| && (denormal_operand() < 0)) |
| return; |
| else |
| changesign(st1_ptr); |
| } else if ((st0_tag == TW_Denormal) |
| && (denormal_operand() < 0)) |
| return; |
| break; |
| |
| case TW_NaN: |
| if (real_2op_NaN(st0_ptr, st0_tag, 1, st0_ptr) < 0) |
| return; |
| } |
| |
| } else if (st0_tag == TW_NaN) { |
| if (real_2op_NaN(st0_ptr, st0_tag, 1, st0_ptr) < 0) |
| return; |
| } else if (st0_tag == TW_Infinity) { |
| if (st1_tag == TW_NaN) { |
| if (real_2op_NaN(st0_ptr, st0_tag, 1, st0_ptr) < 0) |
| return; |
| } else if (signnegative(st0_ptr)) { |
| #ifndef PECULIAR_486 |
| /* This should have higher priority than denormals, but... */ |
| if (arith_invalid(1) < 0) /* log(-infinity) */ |
| return; |
| #endif /* PECULIAR_486 */ |
| if ((st1_tag == TW_Denormal) |
| && (denormal_operand() < 0)) |
| return; |
| #ifdef PECULIAR_486 |
| /* Denormal operands actually get higher priority */ |
| if (arith_invalid(1) < 0) /* log(-infinity) */ |
| return; |
| #endif /* PECULIAR_486 */ |
| } else if (st1_tag == TAG_Zero) { |
| /* log(infinity) */ |
| if (arith_invalid(1) < 0) |
| return; |
| } |
| |
| /* st(1) must be valid here. */ |
| |
| else if ((st1_tag == TW_Denormal) && (denormal_operand() < 0)) |
| return; |
| |
| /* The Manual says that log(Infinity) is invalid, but a real |
| 80486 sensibly says that it is o.k. */ |
| else { |
| u_char sign = getsign(st1_ptr); |
| FPU_copy_to_reg1(&CONST_INF, TAG_Special); |
| setsign(st1_ptr, sign); |
| } |
| } |
| #ifdef PARANOID |
| else { |
| EXCEPTION(EX_INTERNAL | 0x117); |
| return; |
| } |
| #endif /* PARANOID */ |
| |
| FPU_pop(); |
| return; |
| |
| } |
| |
| static void fscale(FPU_REG *st0_ptr, u_char st0_tag) |
| { |
| FPU_REG *st1_ptr = &st(1); |
| u_char st1_tag = FPU_gettagi(1); |
| int old_cw = control_word; |
| u_char sign = getsign(st0_ptr); |
| |
| clear_C1(); |
| if (!((st0_tag ^ TAG_Valid) | (st1_tag ^ TAG_Valid))) { |
| long scale; |
| FPU_REG tmp; |
| |
| /* Convert register for internal use. */ |
| setexponent16(st0_ptr, exponent(st0_ptr)); |
| |
| valid_scale: |
| |
| if (exponent(st1_ptr) > 30) { |
| /* 2^31 is far too large, would require 2^(2^30) or 2^(-2^30) */ |
| |
| if (signpositive(st1_ptr)) { |
| EXCEPTION(EX_Overflow); |
| FPU_copy_to_reg0(&CONST_INF, TAG_Special); |
| } else { |
| EXCEPTION(EX_Underflow); |
| FPU_copy_to_reg0(&CONST_Z, TAG_Zero); |
| } |
| setsign(st0_ptr, sign); |
| return; |
| } |
| |
| control_word &= ~CW_RC; |
| control_word |= RC_CHOP; |
| reg_copy(st1_ptr, &tmp); |
| FPU_round_to_int(&tmp, st1_tag); /* This can never overflow here */ |
| control_word = old_cw; |
| scale = signnegative(st1_ptr) ? -tmp.sigl : tmp.sigl; |
| scale += exponent16(st0_ptr); |
| |
| setexponent16(st0_ptr, scale); |
| |
| /* Use FPU_round() to properly detect under/overflow etc */ |
| FPU_round(st0_ptr, 0, 0, control_word, sign); |
| |
| return; |
| } |
| |
| if (st0_tag == TAG_Special) |
| st0_tag = FPU_Special(st0_ptr); |
| if (st1_tag == TAG_Special) |
| st1_tag = FPU_Special(st1_ptr); |
| |
| if ((st0_tag == TAG_Valid) || (st0_tag == TW_Denormal)) { |
| switch (st1_tag) { |
| case TAG_Valid: |
| /* st(0) must be a denormal */ |
| if ((st0_tag == TW_Denormal) |
| && (denormal_operand() < 0)) |
| return; |
| |
| FPU_to_exp16(st0_ptr, st0_ptr); /* Will not be left on stack */ |
| goto valid_scale; |
| |
| case TAG_Zero: |
| if (st0_tag == TW_Denormal) |
| denormal_operand(); |
| return; |
| |
| case TW_Denormal: |
| denormal_operand(); |
| return; |
| |
| case TW_Infinity: |
| if ((st0_tag == TW_Denormal) |
| && (denormal_operand() < 0)) |
| return; |
| |
| if (signpositive(st1_ptr)) |
| FPU_copy_to_reg0(&CONST_INF, TAG_Special); |
| else |
| FPU_copy_to_reg0(&CONST_Z, TAG_Zero); |
| setsign(st0_ptr, sign); |
| return; |
| |
| case TW_NaN: |
| real_2op_NaN(st1_ptr, st1_tag, 0, st0_ptr); |
| return; |
| } |
| } else if (st0_tag == TAG_Zero) { |
| switch (st1_tag) { |
| case TAG_Valid: |
| case TAG_Zero: |
| return; |
| |
| case TW_Denormal: |
| denormal_operand(); |
| return; |
| |
| case TW_Infinity: |
| if (signpositive(st1_ptr)) |
| arith_invalid(0); /* Zero scaled by +Infinity */ |
| return; |
| |
| case TW_NaN: |
| real_2op_NaN(st1_ptr, st1_tag, 0, st0_ptr); |
| return; |
| } |
| } else if (st0_tag == TW_Infinity) { |
| switch (st1_tag) { |
| case TAG_Valid: |
| case TAG_Zero: |
| return; |
| |
| case TW_Denormal: |
| denormal_operand(); |
| return; |
| |
| case TW_Infinity: |
| if (signnegative(st1_ptr)) |
| arith_invalid(0); /* Infinity scaled by -Infinity */ |
| return; |
| |
| case TW_NaN: |
| real_2op_NaN(st1_ptr, st1_tag, 0, st0_ptr); |
| return; |
| } |
| } else if (st0_tag == TW_NaN) { |
| if (st1_tag != TAG_Empty) { |
| real_2op_NaN(st1_ptr, st1_tag, 0, st0_ptr); |
| return; |
| } |
| } |
| #ifdef PARANOID |
| if (!((st0_tag == TAG_Empty) || (st1_tag == TAG_Empty))) { |
| EXCEPTION(EX_INTERNAL | 0x115); |
| return; |
| } |
| #endif |
| |
| /* At least one of st(0), st(1) must be empty */ |
| FPU_stack_underflow(); |
| |
| } |
| |
| /*---------------------------------------------------------------------------*/ |
| |
| static FUNC_ST0 const trig_table_a[] = { |
| f2xm1, fyl2x, fptan, fpatan, |
| fxtract, fprem1, (FUNC_ST0) fdecstp, (FUNC_ST0) fincstp |
| }; |
| |
| void FPU_triga(void) |
| { |
| (trig_table_a[FPU_rm]) (&st(0), FPU_gettag0()); |
| } |
| |
| static FUNC_ST0 const trig_table_b[] = { |
| fprem, fyl2xp1, fsqrt_, fsincos, frndint_, fscale, (FUNC_ST0) fsin, fcos |
| }; |
| |
| void FPU_trigb(void) |
| { |
| (trig_table_b[FPU_rm]) (&st(0), FPU_gettag0()); |
| } |