| // SPDX-License-Identifier: GPL-2.0-only |
| /* |
| * TI LP8788 MFD - ADC driver |
| * |
| * Copyright 2012 Texas Instruments |
| * |
| * Author: Milo(Woogyom) Kim <milo.kim@ti.com> |
| */ |
| |
| #include <linux/delay.h> |
| #include <linux/iio/iio.h> |
| #include <linux/iio/driver.h> |
| #include <linux/iio/machine.h> |
| #include <linux/mfd/lp8788.h> |
| #include <linux/module.h> |
| #include <linux/mutex.h> |
| #include <linux/platform_device.h> |
| #include <linux/slab.h> |
| |
| /* register address */ |
| #define LP8788_ADC_CONF 0x60 |
| #define LP8788_ADC_RAW 0x61 |
| #define LP8788_ADC_DONE 0x63 |
| |
| #define ADC_CONV_START 1 |
| |
| struct lp8788_adc { |
| struct lp8788 *lp; |
| struct iio_map *map; |
| struct mutex lock; |
| }; |
| |
| static const int lp8788_scale[LPADC_MAX] = { |
| [LPADC_VBATT_5P5] = 1343101, |
| [LPADC_VIN_CHG] = 3052503, |
| [LPADC_IBATT] = 610500, |
| [LPADC_IC_TEMP] = 61050, |
| [LPADC_VBATT_6P0] = 1465201, |
| [LPADC_VBATT_5P0] = 1221001, |
| [LPADC_ADC1] = 610500, |
| [LPADC_ADC2] = 610500, |
| [LPADC_VDD] = 1025641, |
| [LPADC_VCOIN] = 757020, |
| [LPADC_ADC3] = 610500, |
| [LPADC_ADC4] = 610500, |
| }; |
| |
| static int lp8788_get_adc_result(struct lp8788_adc *adc, enum lp8788_adc_id id, |
| int *val) |
| { |
| unsigned int msb; |
| unsigned int lsb; |
| unsigned int result; |
| u8 data; |
| u8 rawdata[2]; |
| int size = ARRAY_SIZE(rawdata); |
| int retry = 5; |
| int ret; |
| |
| data = (id << 1) | ADC_CONV_START; |
| ret = lp8788_write_byte(adc->lp, LP8788_ADC_CONF, data); |
| if (ret) |
| goto err_io; |
| |
| /* retry until adc conversion is done */ |
| data = 0; |
| while (retry--) { |
| usleep_range(100, 200); |
| |
| ret = lp8788_read_byte(adc->lp, LP8788_ADC_DONE, &data); |
| if (ret) |
| goto err_io; |
| |
| /* conversion done */ |
| if (data) |
| break; |
| } |
| |
| ret = lp8788_read_multi_bytes(adc->lp, LP8788_ADC_RAW, rawdata, size); |
| if (ret) |
| goto err_io; |
| |
| msb = (rawdata[0] << 4) & 0x00000ff0; |
| lsb = (rawdata[1] >> 4) & 0x0000000f; |
| result = msb | lsb; |
| *val = result; |
| |
| return 0; |
| |
| err_io: |
| return ret; |
| } |
| |
| static int lp8788_adc_read_raw(struct iio_dev *indio_dev, |
| struct iio_chan_spec const *chan, |
| int *val, int *val2, long mask) |
| { |
| struct lp8788_adc *adc = iio_priv(indio_dev); |
| enum lp8788_adc_id id = chan->channel; |
| int ret; |
| |
| mutex_lock(&adc->lock); |
| |
| switch (mask) { |
| case IIO_CHAN_INFO_RAW: |
| ret = lp8788_get_adc_result(adc, id, val) ? -EIO : IIO_VAL_INT; |
| break; |
| case IIO_CHAN_INFO_SCALE: |
| *val = lp8788_scale[id] / 1000000; |
| *val2 = lp8788_scale[id] % 1000000; |
| ret = IIO_VAL_INT_PLUS_MICRO; |
| break; |
| default: |
| ret = -EINVAL; |
| break; |
| } |
| |
| mutex_unlock(&adc->lock); |
| |
| return ret; |
| } |
| |
| static const struct iio_info lp8788_adc_info = { |
| .read_raw = &lp8788_adc_read_raw, |
| }; |
| |
| #define LP8788_CHAN(_id, _type) { \ |
| .type = _type, \ |
| .indexed = 1, \ |
| .channel = LPADC_##_id, \ |
| .info_mask_separate = BIT(IIO_CHAN_INFO_RAW) | \ |
| BIT(IIO_CHAN_INFO_SCALE), \ |
| .datasheet_name = #_id, \ |
| } |
| |
| static const struct iio_chan_spec lp8788_adc_channels[] = { |
| [LPADC_VBATT_5P5] = LP8788_CHAN(VBATT_5P5, IIO_VOLTAGE), |
| [LPADC_VIN_CHG] = LP8788_CHAN(VIN_CHG, IIO_VOLTAGE), |
| [LPADC_IBATT] = LP8788_CHAN(IBATT, IIO_CURRENT), |
| [LPADC_IC_TEMP] = LP8788_CHAN(IC_TEMP, IIO_TEMP), |
| [LPADC_VBATT_6P0] = LP8788_CHAN(VBATT_6P0, IIO_VOLTAGE), |
| [LPADC_VBATT_5P0] = LP8788_CHAN(VBATT_5P0, IIO_VOLTAGE), |
| [LPADC_ADC1] = LP8788_CHAN(ADC1, IIO_VOLTAGE), |
| [LPADC_ADC2] = LP8788_CHAN(ADC2, IIO_VOLTAGE), |
| [LPADC_VDD] = LP8788_CHAN(VDD, IIO_VOLTAGE), |
| [LPADC_VCOIN] = LP8788_CHAN(VCOIN, IIO_VOLTAGE), |
| [LPADC_ADC3] = LP8788_CHAN(ADC3, IIO_VOLTAGE), |
| [LPADC_ADC4] = LP8788_CHAN(ADC4, IIO_VOLTAGE), |
| }; |
| |
| /* default maps used by iio consumer (lp8788-charger driver) */ |
| static struct iio_map lp8788_default_iio_maps[] = { |
| { |
| .consumer_dev_name = "lp8788-charger", |
| .consumer_channel = "lp8788_vbatt_5p0", |
| .adc_channel_label = "VBATT_5P0", |
| }, |
| { |
| .consumer_dev_name = "lp8788-charger", |
| .consumer_channel = "lp8788_adc1", |
| .adc_channel_label = "ADC1", |
| }, |
| { } |
| }; |
| |
| static int lp8788_iio_map_register(struct iio_dev *indio_dev, |
| struct lp8788_platform_data *pdata, |
| struct lp8788_adc *adc) |
| { |
| struct iio_map *map; |
| int ret; |
| |
| map = (!pdata || !pdata->adc_pdata) ? |
| lp8788_default_iio_maps : pdata->adc_pdata; |
| |
| ret = iio_map_array_register(indio_dev, map); |
| if (ret) { |
| dev_err(&indio_dev->dev, "iio map err: %d\n", ret); |
| return ret; |
| } |
| |
| adc->map = map; |
| return 0; |
| } |
| |
| static int lp8788_adc_probe(struct platform_device *pdev) |
| { |
| struct lp8788 *lp = dev_get_drvdata(pdev->dev.parent); |
| struct iio_dev *indio_dev; |
| struct lp8788_adc *adc; |
| int ret; |
| |
| indio_dev = devm_iio_device_alloc(&pdev->dev, sizeof(*adc)); |
| if (!indio_dev) |
| return -ENOMEM; |
| |
| adc = iio_priv(indio_dev); |
| adc->lp = lp; |
| platform_set_drvdata(pdev, indio_dev); |
| |
| indio_dev->dev.of_node = pdev->dev.of_node; |
| ret = lp8788_iio_map_register(indio_dev, lp->pdata, adc); |
| if (ret) |
| return ret; |
| |
| mutex_init(&adc->lock); |
| |
| indio_dev->dev.parent = &pdev->dev; |
| indio_dev->name = pdev->name; |
| indio_dev->modes = INDIO_DIRECT_MODE; |
| indio_dev->info = &lp8788_adc_info; |
| indio_dev->channels = lp8788_adc_channels; |
| indio_dev->num_channels = ARRAY_SIZE(lp8788_adc_channels); |
| |
| ret = iio_device_register(indio_dev); |
| if (ret) { |
| dev_err(&pdev->dev, "iio dev register err: %d\n", ret); |
| goto err_iio_device; |
| } |
| |
| return 0; |
| |
| err_iio_device: |
| iio_map_array_unregister(indio_dev); |
| return ret; |
| } |
| |
| static int lp8788_adc_remove(struct platform_device *pdev) |
| { |
| struct iio_dev *indio_dev = platform_get_drvdata(pdev); |
| |
| iio_device_unregister(indio_dev); |
| iio_map_array_unregister(indio_dev); |
| |
| return 0; |
| } |
| |
| static struct platform_driver lp8788_adc_driver = { |
| .probe = lp8788_adc_probe, |
| .remove = lp8788_adc_remove, |
| .driver = { |
| .name = LP8788_DEV_ADC, |
| }, |
| }; |
| module_platform_driver(lp8788_adc_driver); |
| |
| MODULE_DESCRIPTION("Texas Instruments LP8788 ADC Driver"); |
| MODULE_AUTHOR("Milo Kim"); |
| MODULE_LICENSE("GPL"); |
| MODULE_ALIAS("platform:lp8788-adc"); |