blob: efbb4268875e3a2b1fc43de0789b08b834cf2b3e [file] [log] [blame]
/*
* Copyright (C) 1999, 2000, 2002 Niibe Yutaka
* Copyright (C) 2003 - 2008 Paul Mundt
*
* This file is subject to the terms and conditions of the GNU General Public
* License. See the file "COPYING" in the main directory of this archive
* for more details.
*
*/
! NOTE:
! GNU as (as of 2.9.1) changes bf/s into bt/s and bra, when the address
! to be jumped is too far, but it causes illegal slot exception.
/*
* entry.S contains the system-call and fault low-level handling routines.
* This also contains the timer-interrupt handler, as well as all interrupts
* and faults that can result in a task-switch.
*
* NOTE: This code handles signal-recognition, which happens every time
* after a timer-interrupt and after each system call.
*
* NOTE: This code uses a convention that instructions in the delay slot
* of a transfer-control instruction are indented by an extra space, thus:
*
* jmp @k0 ! control-transfer instruction
* ldc k1, ssr ! delay slot
*
* Stack layout in 'ret_from_syscall':
* ptrace needs to have all regs on the stack.
* if the order here is changed, it needs to be
* updated in ptrace.c and ptrace.h
*
* r0
* ...
* r15 = stack pointer
* spc
* pr
* ssr
* gbr
* mach
* macl
* syscall #
*
*/
#if defined(CONFIG_PREEMPT)
# define preempt_stop() cli
#else
# define preempt_stop()
# define resume_kernel __restore_all
#endif
.align 2
ENTRY(exception_error)
!
#ifdef CONFIG_TRACE_IRQFLAGS
mov.l 2f, r0
jsr @r0
nop
#endif
sti
mov.l 1f, r0
jmp @r0
nop
.align 2
1: .long do_exception_error
#ifdef CONFIG_TRACE_IRQFLAGS
2: .long trace_hardirqs_on
#endif
.align 2
ret_from_exception:
preempt_stop()
#ifdef CONFIG_TRACE_IRQFLAGS
mov.l 4f, r0
jsr @r0
nop
#endif
ENTRY(ret_from_irq)
!
mov #OFF_SR, r0
mov.l @(r0,r15), r0 ! get status register
shll r0
shll r0 ! kernel space?
get_current_thread_info r8, r0
bt resume_kernel ! Yes, it's from kernel, go back soon
#ifdef CONFIG_PREEMPT
bra resume_userspace
nop
ENTRY(resume_kernel)
cli
mov.l @(TI_PRE_COUNT,r8), r0 ! current_thread_info->preempt_count
tst r0, r0
bf noresched
need_resched:
mov.l @(TI_FLAGS,r8), r0 ! current_thread_info->flags
tst #_TIF_NEED_RESCHED, r0 ! need_resched set?
bt noresched
mov #OFF_SR, r0
mov.l @(r0,r15), r0 ! get status register
and #0xf0, r0 ! interrupts off (exception path)?
cmp/eq #0xf0, r0
bt noresched
mov.l 3f, r0
jsr @r0 ! call preempt_schedule_irq
nop
bra need_resched
nop
noresched:
bra __restore_all
nop
.align 2
1: .long PREEMPT_ACTIVE
2: .long schedule
3: .long preempt_schedule_irq
#endif
ENTRY(resume_userspace)
! r8: current_thread_info
cli
#ifdef CONFIG_TRACE_IRQFLAGS
mov.l 5f, r0
jsr @r0
nop
#endif
mov.l @(TI_FLAGS,r8), r0 ! current_thread_info->flags
tst #_TIF_WORK_MASK, r0
bt/s __restore_all
tst #_TIF_NEED_RESCHED, r0
.align 2
work_pending:
! r0: current_thread_info->flags
! r8: current_thread_info
! t: result of "tst #_TIF_NEED_RESCHED, r0"
bf/s work_resched
tst #(_TIF_SIGPENDING | _TIF_RESTORE_SIGMASK), r0
work_notifysig:
bt/s __restore_all
mov r15, r4
mov r12, r5 ! set arg1(save_r0)
mov r0, r6
mov.l 2f, r1
mov.l 3f, r0
jmp @r1
lds r0, pr
work_resched:
mov.l 1f, r1
jsr @r1 ! schedule
nop
cli
#ifdef CONFIG_TRACE_IRQFLAGS
mov.l 5f, r0
jsr @r0
nop
#endif
!
mov.l @(TI_FLAGS,r8), r0 ! current_thread_info->flags
tst #_TIF_WORK_MASK, r0
bt __restore_all
bra work_pending
tst #_TIF_NEED_RESCHED, r0
.align 2
1: .long schedule
2: .long do_notify_resume
3: .long resume_userspace
#ifdef CONFIG_TRACE_IRQFLAGS
4: .long trace_hardirqs_on
5: .long trace_hardirqs_off
#endif
.align 2
syscall_exit_work:
! r0: current_thread_info->flags
! r8: current_thread_info
tst #_TIF_WORK_SYSCALL_MASK, r0
bt/s work_pending
tst #_TIF_NEED_RESCHED, r0
#ifdef CONFIG_TRACE_IRQFLAGS
mov.l 5f, r0
jsr @r0
nop
#endif
sti
mov r15, r4
mov.l 8f, r0 ! do_syscall_trace_leave
jsr @r0
nop
bra resume_userspace
nop
.align 2
syscall_trace_entry:
! Yes it is traced.
mov r15, r4
mov.l 7f, r11 ! Call do_syscall_trace_enter which notifies
jsr @r11 ! superior (will chomp R[0-7])
nop
mov.l r0, @(OFF_R0,r15) ! Save return value
! Reload R0-R4 from kernel stack, where the
! parent may have modified them using
! ptrace(POKEUSR). (Note that R0-R2 are
! used by the system call handler directly
! from the kernel stack anyway, so don't need
! to be reloaded here.) This allows the parent
! to rewrite system calls and args on the fly.
mov.l @(OFF_R4,r15), r4 ! arg0
mov.l @(OFF_R5,r15), r5
mov.l @(OFF_R6,r15), r6
mov.l @(OFF_R7,r15), r7 ! arg3
mov.l @(OFF_R3,r15), r3 ! syscall_nr
!
mov.l 2f, r10 ! Number of syscalls
cmp/hs r10, r3
bf syscall_call
mov #-ENOSYS, r0
bra syscall_exit
mov.l r0, @(OFF_R0,r15) ! Return value
__restore_all:
mov.l 1f, r0
jmp @r0
nop
.align 2
1: .long restore_all
.align 2
syscall_badsys: ! Bad syscall number
get_current_thread_info r8, r0
mov #-ENOSYS, r0
bra resume_userspace
mov.l r0, @(OFF_R0,r15) ! Return value
/*
* The main debug trap handler.
*
* r8=TRA (not the trap number!)
*
* Note: This assumes that the trapa value is left in its original
* form (without the shlr2 shift) so the calculation for the jump
* call table offset remains a simple in place mask.
*/
debug_trap:
mov r8, r0
and #(0xf << 2), r0
mov.l 1f, r8
add r0, r8
mov.l @r8, r8
jsr @r8
nop
bra __restore_all
nop
.align 2
1: .long debug_trap_table
/*
* Syscall interface:
*
* Syscall #: R3
* Arguments #0 to #3: R4--R7
* Arguments #4 to #6: R0, R1, R2
* TRA: (number of arguments + ABI revision) x 4
*
* This code also handles delegating other traps to the BIOS/gdb stub
* according to:
*
* Trap number
* (TRA>>2) Purpose
* -------- -------
* 0x00-0x0f original SH-3/4 syscall ABI (not in general use).
* 0x10-0x1f general SH-3/4 syscall ABI.
* 0x20-0x2f syscall ABI for SH-2 parts.
* 0x30-0x3f debug traps used by the kernel.
* 0x40-0xff Not supported by all parts, so left unhandled.
*
* Note: When we're first called, the TRA value must be shifted
* right 2 bits in order to get the value that was used as the "trapa"
* argument.
*/
.align 2
.globl ret_from_fork
ret_from_fork:
mov.l 1f, r8
jsr @r8
mov r0, r4
bra syscall_exit
nop
.align 2
1: .long schedule_tail
/*
* The poorly named main trapa decode and dispatch routine, for
* system calls and debug traps through their respective jump tables.
*/
ENTRY(system_call)
#if !defined(CONFIG_CPU_SH2)
mov.l 1f, r9
mov.l @r9, r8 ! Read from TRA (Trap Address) Register
#endif
/*
* Check the trap type
*/
mov #((0x20 << 2) - 1), r9
cmp/hi r9, r8
bt/s debug_trap ! it's a debug trap..
mov #OFF_TRA, r9
add r15, r9
mov.l r8, @r9 ! set TRA value to tra
#ifdef CONFIG_TRACE_IRQFLAGS
mov.l 5f, r10
jsr @r10
nop
#endif
sti
!
get_current_thread_info r8, r10
mov.l @(TI_FLAGS,r8), r8
mov #_TIF_WORK_SYSCALL_MASK, r10
tst r10, r8
bf syscall_trace_entry
!
mov.l 2f, r8 ! Number of syscalls
cmp/hs r8, r3
bt syscall_badsys
!
syscall_call:
shll2 r3 ! x4
mov.l 3f, r8 ! Load the address of sys_call_table
add r8, r3
mov.l @r3, r8
jsr @r8 ! jump to specific syscall handler
nop
mov.l @(OFF_R0,r15), r12 ! save r0
mov.l r0, @(OFF_R0,r15) ! save the return value
!
syscall_exit:
cli
#ifdef CONFIG_TRACE_IRQFLAGS
mov.l 6f, r0
jsr @r0
nop
#endif
!
get_current_thread_info r8, r0
mov.l @(TI_FLAGS,r8), r0 ! current_thread_info->flags
tst #_TIF_ALLWORK_MASK, r0
bf syscall_exit_work
bra __restore_all
nop
.align 2
#if !defined(CONFIG_CPU_SH2)
1: .long TRA
#endif
2: .long NR_syscalls
3: .long sys_call_table
#ifdef CONFIG_TRACE_IRQFLAGS
5: .long trace_hardirqs_on
6: .long trace_hardirqs_off
#endif
7: .long do_syscall_trace_enter
8: .long do_syscall_trace_leave