| # SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) |
| %YAML 1.2 |
| --- |
| $id: http://devicetree.org/schemas/display/panel/samsung,s6d7aa0.yaml# |
| $schema: http://devicetree.org/meta-schemas/core.yaml# |
| |
| title: Samsung S6D7AA0 MIPI-DSI LCD panel controller |
| |
| maintainers: |
| - Artur Weber <aweber.kernel@gmail.com> |
| |
| allOf: |
| - $ref: panel-common.yaml# |
| |
| properties: |
| compatible: |
| items: |
| - enum: |
| # 1280x800 LSL080AL02 panel |
| - samsung,lsl080al02 |
| # 1024x768 LSL080AL03 panel |
| - samsung,lsl080al03 |
| # 1024x768 LTL101AT01 panel |
| - samsung,ltl101at01 |
| - const: samsung,s6d7aa0 |
| |
| reg: true |
| |
| backlight: |
| description: |
| Backlight to use for the panel. If this property is set on panels |
| that have DSI-based backlight control (LSL080AL03 and LTL101AT01), |
| it overrides the DSI-based backlight. |
| |
| reset-gpios: |
| description: Reset GPIO pin, usually GPIO_ACTIVE_LOW. |
| |
| power-supply: |
| description: |
| Main power supply for the panel; the exact voltage differs between |
| panels, and is usually somewhere around 3.3-5v. |
| |
| vmipi-supply: |
| description: VMIPI supply, usually 1.8v. |
| |
| required: |
| - compatible |
| - reg |
| - reset-gpios |
| |
| additionalProperties: false |
| |
| examples: |
| - | |
| #include <dt-bindings/gpio/gpio.h> |
| |
| dsi { |
| #address-cells = <1>; |
| #size-cells = <0>; |
| |
| panel@0 { |
| compatible = "samsung,lsl080al02", "samsung,s6d7aa0"; |
| reg = <0>; |
| power-supply = <&display_3v3_supply>; |
| reset-gpios = <&gpf0 4 GPIO_ACTIVE_LOW>; |
| backlight = <&backlight>; |
| }; |
| }; |
| |
| ... |