blob: a5d7fc8418c976ff28925f62e0e2f639d7ec5094 [file] [log] [blame]
/*
* Copyright © 2014 Intel Corporation
*
* Permission is hereby granted, free of charge, to any person obtaining a
* copy of this software and associated documentation files (the "Software"),
* to deal in the Software without restriction, including without limitation
* the rights to use, copy, modify, merge, publish, distribute, sublicense,
* and/or sell copies of the Software, and to permit persons to whom the
* Software is furnished to do so, subject to the following conditions:
*
* The above copyright notice and this permission notice (including the next
* paragraph) shall be included in all copies or substantial portions of the
* Software.
*
* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
* IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
* FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
* THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
* LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
* FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER
* DEALINGS IN THE SOFTWARE.
*
* Author: Shobhit Kumar <shobhit.kumar@intel.com>
*
*/
#include <linux/gpio/consumer.h>
#include <linux/gpio/machine.h>
#include <linux/mfd/intel_soc_pmic.h>
#include <linux/pinctrl/consumer.h>
#include <linux/pinctrl/machine.h>
#include <linux/slab.h>
#include <linux/string_helpers.h>
#include <asm/unaligned.h>
#include <drm/drm_crtc.h>
#include <drm/drm_edid.h>
#include <video/mipi_display.h>
#include "i915_drv.h"
#include "i915_reg.h"
#include "intel_de.h"
#include "intel_display_types.h"
#include "intel_dsi.h"
#include "intel_dsi_vbt.h"
#include "intel_gmbus_regs.h"
#include "intel_pps_regs.h"
#include "vlv_dsi.h"
#include "vlv_dsi_regs.h"
#include "vlv_sideband.h"
#define MIPI_TRANSFER_MODE_SHIFT 0
#define MIPI_VIRTUAL_CHANNEL_SHIFT 1
#define MIPI_PORT_SHIFT 3
struct i2c_adapter_lookup {
u16 slave_addr;
struct intel_dsi *intel_dsi;
acpi_handle dev_handle;
};
#define CHV_GPIO_IDX_START_N 0
#define CHV_GPIO_IDX_START_E 73
#define CHV_GPIO_IDX_START_SW 100
#define CHV_GPIO_IDX_START_SE 198
/* ICL DSI Display GPIO Pins */
#define ICL_GPIO_DDSP_HPD_A 0
#define ICL_GPIO_L_VDDEN_1 1
#define ICL_GPIO_L_BKLTEN_1 2
#define ICL_GPIO_DDPA_CTRLCLK_1 3
#define ICL_GPIO_DDPA_CTRLDATA_1 4
#define ICL_GPIO_DDSP_HPD_B 5
#define ICL_GPIO_L_VDDEN_2 6
#define ICL_GPIO_L_BKLTEN_2 7
#define ICL_GPIO_DDPA_CTRLCLK_2 8
#define ICL_GPIO_DDPA_CTRLDATA_2 9
static enum port intel_dsi_seq_port_to_port(struct intel_dsi *intel_dsi,
u8 seq_port)
{
/*
* If single link DSI is being used on any port, the VBT sequence block
* send packet apparently always has 0 for the port. Just use the port
* we have configured, and ignore the sequence block port.
*/
if (hweight8(intel_dsi->ports) == 1)
return ffs(intel_dsi->ports) - 1;
if (seq_port) {
if (intel_dsi->ports & BIT(PORT_B))
return PORT_B;
if (intel_dsi->ports & BIT(PORT_C))
return PORT_C;
}
return PORT_A;
}
static const u8 *mipi_exec_send_packet(struct intel_dsi *intel_dsi,
const u8 *data)
{
struct drm_i915_private *dev_priv = to_i915(intel_dsi->base.base.dev);
struct mipi_dsi_device *dsi_device;
u8 type, flags, seq_port;
u16 len;
enum port port;
drm_dbg_kms(&dev_priv->drm, "\n");
flags = *data++;
type = *data++;
len = *((u16 *) data);
data += 2;
seq_port = (flags >> MIPI_PORT_SHIFT) & 3;
port = intel_dsi_seq_port_to_port(intel_dsi, seq_port);
if (drm_WARN_ON(&dev_priv->drm, !intel_dsi->dsi_hosts[port]))
goto out;
dsi_device = intel_dsi->dsi_hosts[port]->device;
if (!dsi_device) {
drm_dbg_kms(&dev_priv->drm, "no dsi device for port %c\n",
port_name(port));
goto out;
}
if ((flags >> MIPI_TRANSFER_MODE_SHIFT) & 1)
dsi_device->mode_flags &= ~MIPI_DSI_MODE_LPM;
else
dsi_device->mode_flags |= MIPI_DSI_MODE_LPM;
dsi_device->channel = (flags >> MIPI_VIRTUAL_CHANNEL_SHIFT) & 3;
switch (type) {
case MIPI_DSI_GENERIC_SHORT_WRITE_0_PARAM:
mipi_dsi_generic_write(dsi_device, NULL, 0);
break;
case MIPI_DSI_GENERIC_SHORT_WRITE_1_PARAM:
mipi_dsi_generic_write(dsi_device, data, 1);
break;
case MIPI_DSI_GENERIC_SHORT_WRITE_2_PARAM:
mipi_dsi_generic_write(dsi_device, data, 2);
break;
case MIPI_DSI_GENERIC_READ_REQUEST_0_PARAM:
case MIPI_DSI_GENERIC_READ_REQUEST_1_PARAM:
case MIPI_DSI_GENERIC_READ_REQUEST_2_PARAM:
drm_dbg(&dev_priv->drm,
"Generic Read not yet implemented or used\n");
break;
case MIPI_DSI_GENERIC_LONG_WRITE:
mipi_dsi_generic_write(dsi_device, data, len);
break;
case MIPI_DSI_DCS_SHORT_WRITE:
mipi_dsi_dcs_write_buffer(dsi_device, data, 1);
break;
case MIPI_DSI_DCS_SHORT_WRITE_PARAM:
mipi_dsi_dcs_write_buffer(dsi_device, data, 2);
break;
case MIPI_DSI_DCS_READ:
drm_dbg(&dev_priv->drm,
"DCS Read not yet implemented or used\n");
break;
case MIPI_DSI_DCS_LONG_WRITE:
mipi_dsi_dcs_write_buffer(dsi_device, data, len);
break;
}
if (DISPLAY_VER(dev_priv) < 11)
vlv_dsi_wait_for_fifo_empty(intel_dsi, port);
out:
data += len;
return data;
}
static const u8 *mipi_exec_delay(struct intel_dsi *intel_dsi, const u8 *data)
{
struct drm_i915_private *i915 = to_i915(intel_dsi->base.base.dev);
u32 delay = *((const u32 *) data);
drm_dbg_kms(&i915->drm, "%d usecs\n", delay);
usleep_range(delay, delay + 10);
data += 4;
return data;
}
static void soc_gpio_set_value(struct intel_connector *connector, u8 gpio_index,
const char *con_id, u8 idx, bool value)
{
struct drm_i915_private *dev_priv = to_i915(connector->base.dev);
/* XXX: this table is a quick ugly hack. */
static struct gpio_desc *soc_gpio_table[U8_MAX + 1];
struct gpio_desc *gpio_desc = soc_gpio_table[gpio_index];
if (gpio_desc) {
gpiod_set_value(gpio_desc, value);
} else {
gpio_desc = devm_gpiod_get_index(dev_priv->drm.dev, con_id, idx,
value ? GPIOD_OUT_HIGH : GPIOD_OUT_LOW);
if (IS_ERR(gpio_desc)) {
drm_err(&dev_priv->drm,
"GPIO index %u request failed (%pe)\n",
gpio_index, gpio_desc);
return;
}
soc_gpio_table[gpio_index] = gpio_desc;
}
}
static void soc_opaque_gpio_set_value(struct intel_connector *connector,
u8 gpio_index, const char *chip,
const char *con_id, u8 idx, bool value)
{
struct gpiod_lookup_table *lookup;
lookup = kzalloc(struct_size(lookup, table, 2), GFP_KERNEL);
if (!lookup)
return;
lookup->dev_id = "0000:00:02.0";
lookup->table[0] =
GPIO_LOOKUP_IDX(chip, idx, con_id, idx, GPIO_ACTIVE_HIGH);
gpiod_add_lookup_table(lookup);
soc_gpio_set_value(connector, gpio_index, con_id, idx, value);
gpiod_remove_lookup_table(lookup);
kfree(lookup);
}
static void vlv_gpio_set_value(struct intel_connector *connector,
u8 gpio_source, u8 gpio_index, bool value)
{
struct drm_i915_private *dev_priv = to_i915(connector->base.dev);
/* XXX: this assumes vlv_gpio_table only has NC GPIOs. */
if (connector->panel.vbt.dsi.seq_version < 3) {
if (gpio_source == 1) {
drm_dbg_kms(&dev_priv->drm, "SC gpio not supported\n");
return;
}
if (gpio_source > 1) {
drm_dbg_kms(&dev_priv->drm,
"unknown gpio source %u\n", gpio_source);
return;
}
}
soc_opaque_gpio_set_value(connector, gpio_index,
"INT33FC:01", "Panel N", gpio_index, value);
}
static void chv_gpio_set_value(struct intel_connector *connector,
u8 gpio_source, u8 gpio_index, bool value)
{
struct drm_i915_private *dev_priv = to_i915(connector->base.dev);
if (connector->panel.vbt.dsi.seq_version >= 3) {
if (gpio_index >= CHV_GPIO_IDX_START_SE) {
/* XXX: it's unclear whether 255->57 is part of SE. */
soc_opaque_gpio_set_value(connector, gpio_index, "INT33FF:03", "Panel SE",
gpio_index - CHV_GPIO_IDX_START_SE, value);
} else if (gpio_index >= CHV_GPIO_IDX_START_SW) {
soc_opaque_gpio_set_value(connector, gpio_index, "INT33FF:00", "Panel SW",
gpio_index - CHV_GPIO_IDX_START_SW, value);
} else if (gpio_index >= CHV_GPIO_IDX_START_E) {
soc_opaque_gpio_set_value(connector, gpio_index, "INT33FF:02", "Panel E",
gpio_index - CHV_GPIO_IDX_START_E, value);
} else {
soc_opaque_gpio_set_value(connector, gpio_index, "INT33FF:01", "Panel N",
gpio_index - CHV_GPIO_IDX_START_N, value);
}
} else {
/* XXX: The spec is unclear about CHV GPIO on seq v2 */
if (gpio_source != 0) {
drm_dbg_kms(&dev_priv->drm,
"unknown gpio source %u\n", gpio_source);
return;
}
if (gpio_index >= CHV_GPIO_IDX_START_E) {
drm_dbg_kms(&dev_priv->drm,
"invalid gpio index %u for GPIO N\n",
gpio_index);
return;
}
soc_opaque_gpio_set_value(connector, gpio_index, "INT33FF:01", "Panel N",
gpio_index - CHV_GPIO_IDX_START_N, value);
}
}
static void bxt_gpio_set_value(struct intel_connector *connector,
u8 gpio_index, bool value)
{
soc_gpio_set_value(connector, gpio_index, NULL, gpio_index, value);
}
enum {
MIPI_RESET_1 = 0,
MIPI_AVDD_EN_1,
MIPI_BKLT_EN_1,
MIPI_AVEE_EN_1,
MIPI_VIO_EN_1,
MIPI_RESET_2,
MIPI_AVDD_EN_2,
MIPI_BKLT_EN_2,
MIPI_AVEE_EN_2,
MIPI_VIO_EN_2,
};
static void icl_native_gpio_set_value(struct drm_i915_private *dev_priv,
int gpio, bool value)
{
int index;
if (drm_WARN_ON(&dev_priv->drm, DISPLAY_VER(dev_priv) == 11 && gpio >= MIPI_RESET_2))
return;
switch (gpio) {
case MIPI_RESET_1:
case MIPI_RESET_2:
index = gpio == MIPI_RESET_1 ? HPD_PORT_A : HPD_PORT_B;
/*
* Disable HPD to set the pin to output, and set output
* value. The HPD pin should not be enabled for DSI anyway,
* assuming the board design and VBT are sane, and the pin isn't
* used by a non-DSI encoder.
*
* The locking protects against concurrent SHOTPLUG_CTL_DDI
* modifications in irq setup and handling.
*/
spin_lock_irq(&dev_priv->irq_lock);
intel_de_rmw(dev_priv, SHOTPLUG_CTL_DDI,
SHOTPLUG_CTL_DDI_HPD_ENABLE(index) |
SHOTPLUG_CTL_DDI_HPD_OUTPUT_DATA(index),
value ? SHOTPLUG_CTL_DDI_HPD_OUTPUT_DATA(index) : 0);
spin_unlock_irq(&dev_priv->irq_lock);
break;
case MIPI_AVDD_EN_1:
case MIPI_AVDD_EN_2:
index = gpio == MIPI_AVDD_EN_1 ? 0 : 1;
intel_de_rmw(dev_priv, PP_CONTROL(index), PANEL_POWER_ON,
value ? PANEL_POWER_ON : 0);
break;
case MIPI_BKLT_EN_1:
case MIPI_BKLT_EN_2:
index = gpio == MIPI_BKLT_EN_1 ? 0 : 1;
intel_de_rmw(dev_priv, PP_CONTROL(index), EDP_BLC_ENABLE,
value ? EDP_BLC_ENABLE : 0);
break;
case MIPI_AVEE_EN_1:
case MIPI_AVEE_EN_2:
index = gpio == MIPI_AVEE_EN_1 ? 1 : 2;
intel_de_rmw(dev_priv, GPIO(dev_priv, index),
GPIO_CLOCK_VAL_OUT,
GPIO_CLOCK_DIR_MASK | GPIO_CLOCK_DIR_OUT |
GPIO_CLOCK_VAL_MASK | (value ? GPIO_CLOCK_VAL_OUT : 0));
break;
case MIPI_VIO_EN_1:
case MIPI_VIO_EN_2:
index = gpio == MIPI_VIO_EN_1 ? 1 : 2;
intel_de_rmw(dev_priv, GPIO(dev_priv, index),
GPIO_DATA_VAL_OUT,
GPIO_DATA_DIR_MASK | GPIO_DATA_DIR_OUT |
GPIO_DATA_VAL_MASK | (value ? GPIO_DATA_VAL_OUT : 0));
break;
default:
MISSING_CASE(gpio);
}
}
static const u8 *mipi_exec_gpio(struct intel_dsi *intel_dsi, const u8 *data)
{
struct drm_device *dev = intel_dsi->base.base.dev;
struct drm_i915_private *i915 = to_i915(dev);
struct intel_connector *connector = intel_dsi->attached_connector;
u8 gpio_source = 0, gpio_index = 0, gpio_number;
bool value;
int size;
bool native = DISPLAY_VER(i915) >= 11;
if (connector->panel.vbt.dsi.seq_version >= 3) {
size = 3;
gpio_index = data[0];
gpio_number = data[1];
value = data[2] & BIT(0);
if (connector->panel.vbt.dsi.seq_version >= 4 && data[2] & BIT(1))
native = false;
} else {
size = 2;
gpio_number = data[0];
value = data[1] & BIT(0);
if (connector->panel.vbt.dsi.seq_version == 2)
gpio_source = (data[1] >> 1) & 3;
}
drm_dbg_kms(&i915->drm, "GPIO index %u, number %u, source %u, native %s, set to %s\n",
gpio_index, gpio_number, gpio_source, str_yes_no(native), str_on_off(value));
if (native)
icl_native_gpio_set_value(i915, gpio_number, value);
else if (DISPLAY_VER(i915) >= 9)
bxt_gpio_set_value(connector, gpio_index, value);
else if (IS_VALLEYVIEW(i915))
vlv_gpio_set_value(connector, gpio_source, gpio_number, value);
else if (IS_CHERRYVIEW(i915))
chv_gpio_set_value(connector, gpio_source, gpio_number, value);
return data + size;
}
#ifdef CONFIG_ACPI
static int i2c_adapter_lookup(struct acpi_resource *ares, void *data)
{
struct i2c_adapter_lookup *lookup = data;
struct intel_dsi *intel_dsi = lookup->intel_dsi;
struct acpi_resource_i2c_serialbus *sb;
struct i2c_adapter *adapter;
acpi_handle adapter_handle;
acpi_status status;
if (!i2c_acpi_get_i2c_resource(ares, &sb))
return 1;
if (lookup->slave_addr != sb->slave_address)
return 1;
status = acpi_get_handle(lookup->dev_handle,
sb->resource_source.string_ptr,
&adapter_handle);
if (ACPI_FAILURE(status))
return 1;
adapter = i2c_acpi_find_adapter_by_handle(adapter_handle);
if (adapter)
intel_dsi->i2c_bus_num = adapter->nr;
return 1;
}
static void i2c_acpi_find_adapter(struct intel_dsi *intel_dsi,
const u16 slave_addr)
{
struct drm_device *drm_dev = intel_dsi->base.base.dev;
struct acpi_device *adev = ACPI_COMPANION(drm_dev->dev);
struct i2c_adapter_lookup lookup = {
.slave_addr = slave_addr,
.intel_dsi = intel_dsi,
.dev_handle = acpi_device_handle(adev),
};
LIST_HEAD(resource_list);
acpi_dev_get_resources(adev, &resource_list, i2c_adapter_lookup, &lookup);
acpi_dev_free_resource_list(&resource_list);
}
#else
static inline void i2c_acpi_find_adapter(struct intel_dsi *intel_dsi,
const u16 slave_addr)
{
}
#endif
static const u8 *mipi_exec_i2c(struct intel_dsi *intel_dsi, const u8 *data)
{
struct drm_i915_private *i915 = to_i915(intel_dsi->base.base.dev);
struct i2c_adapter *adapter;
struct i2c_msg msg;
int ret;
u8 vbt_i2c_bus_num = *(data + 2);
u16 slave_addr = *(u16 *)(data + 3);
u8 reg_offset = *(data + 5);
u8 payload_size = *(data + 6);
u8 *payload_data;
drm_dbg_kms(&i915->drm, "bus %d client-addr 0x%02x reg 0x%02x data %*ph\n",
vbt_i2c_bus_num, slave_addr, reg_offset, payload_size, data + 7);
if (intel_dsi->i2c_bus_num < 0) {
intel_dsi->i2c_bus_num = vbt_i2c_bus_num;
i2c_acpi_find_adapter(intel_dsi, slave_addr);
}
adapter = i2c_get_adapter(intel_dsi->i2c_bus_num);
if (!adapter) {
drm_err(&i915->drm, "Cannot find a valid i2c bus for xfer\n");
goto err_bus;
}
payload_data = kzalloc(payload_size + 1, GFP_KERNEL);
if (!payload_data)
goto err_alloc;
payload_data[0] = reg_offset;
memcpy(&payload_data[1], (data + 7), payload_size);
msg.addr = slave_addr;
msg.flags = 0;
msg.len = payload_size + 1;
msg.buf = payload_data;
ret = i2c_transfer(adapter, &msg, 1);
if (ret < 0)
drm_err(&i915->drm,
"Failed to xfer payload of size (%u) to reg (%u)\n",
payload_size, reg_offset);
kfree(payload_data);
err_alloc:
i2c_put_adapter(adapter);
err_bus:
return data + payload_size + 7;
}
static const u8 *mipi_exec_spi(struct intel_dsi *intel_dsi, const u8 *data)
{
struct drm_i915_private *i915 = to_i915(intel_dsi->base.base.dev);
drm_dbg_kms(&i915->drm, "Skipping SPI element execution\n");
return data + *(data + 5) + 6;
}
static const u8 *mipi_exec_pmic(struct intel_dsi *intel_dsi, const u8 *data)
{
struct drm_i915_private *i915 = to_i915(intel_dsi->base.base.dev);
#ifdef CONFIG_PMIC_OPREGION
u32 value, mask, reg_address;
u16 i2c_address;
int ret;
/* byte 0 aka PMIC Flag is reserved */
i2c_address = get_unaligned_le16(data + 1);
reg_address = get_unaligned_le32(data + 3);
value = get_unaligned_le32(data + 7);
mask = get_unaligned_le32(data + 11);
ret = intel_soc_pmic_exec_mipi_pmic_seq_element(i2c_address,
reg_address,
value, mask);
if (ret)
drm_err(&i915->drm, "%s failed, error: %d\n", __func__, ret);
#else
drm_err(&i915->drm,
"Your hardware requires CONFIG_PMIC_OPREGION and it is not set\n");
#endif
return data + 15;
}
typedef const u8 * (*fn_mipi_elem_exec)(struct intel_dsi *intel_dsi,
const u8 *data);
static const fn_mipi_elem_exec exec_elem[] = {
[MIPI_SEQ_ELEM_SEND_PKT] = mipi_exec_send_packet,
[MIPI_SEQ_ELEM_DELAY] = mipi_exec_delay,
[MIPI_SEQ_ELEM_GPIO] = mipi_exec_gpio,
[MIPI_SEQ_ELEM_I2C] = mipi_exec_i2c,
[MIPI_SEQ_ELEM_SPI] = mipi_exec_spi,
[MIPI_SEQ_ELEM_PMIC] = mipi_exec_pmic,
};
/*
* MIPI Sequence from VBT #53 parsing logic
* We have already separated each seqence during bios parsing
* Following is generic execution function for any sequence
*/
static const char * const seq_name[] = {
[MIPI_SEQ_END] = "MIPI_SEQ_END",
[MIPI_SEQ_DEASSERT_RESET] = "MIPI_SEQ_DEASSERT_RESET",
[MIPI_SEQ_INIT_OTP] = "MIPI_SEQ_INIT_OTP",
[MIPI_SEQ_DISPLAY_ON] = "MIPI_SEQ_DISPLAY_ON",
[MIPI_SEQ_DISPLAY_OFF] = "MIPI_SEQ_DISPLAY_OFF",
[MIPI_SEQ_ASSERT_RESET] = "MIPI_SEQ_ASSERT_RESET",
[MIPI_SEQ_BACKLIGHT_ON] = "MIPI_SEQ_BACKLIGHT_ON",
[MIPI_SEQ_BACKLIGHT_OFF] = "MIPI_SEQ_BACKLIGHT_OFF",
[MIPI_SEQ_TEAR_ON] = "MIPI_SEQ_TEAR_ON",
[MIPI_SEQ_TEAR_OFF] = "MIPI_SEQ_TEAR_OFF",
[MIPI_SEQ_POWER_ON] = "MIPI_SEQ_POWER_ON",
[MIPI_SEQ_POWER_OFF] = "MIPI_SEQ_POWER_OFF",
};
static const char *sequence_name(enum mipi_seq seq_id)
{
if (seq_id < ARRAY_SIZE(seq_name))
return seq_name[seq_id];
return "(unknown)";
}
static void intel_dsi_vbt_exec(struct intel_dsi *intel_dsi,
enum mipi_seq seq_id)
{
struct drm_i915_private *dev_priv = to_i915(intel_dsi->base.base.dev);
struct intel_connector *connector = intel_dsi->attached_connector;
const u8 *data;
fn_mipi_elem_exec mipi_elem_exec;
if (drm_WARN_ON(&dev_priv->drm,
seq_id >= ARRAY_SIZE(connector->panel.vbt.dsi.sequence)))
return;
data = connector->panel.vbt.dsi.sequence[seq_id];
if (!data)
return;
drm_WARN_ON(&dev_priv->drm, *data != seq_id);
drm_dbg_kms(&dev_priv->drm, "Starting MIPI sequence %d - %s\n",
seq_id, sequence_name(seq_id));
/* Skip Sequence Byte. */
data++;
/* Skip Size of Sequence. */
if (connector->panel.vbt.dsi.seq_version >= 3)
data += 4;
while (*data != MIPI_SEQ_ELEM_END) {
u8 operation_byte = *data++;
u8 operation_size = 0;
if (operation_byte < ARRAY_SIZE(exec_elem))
mipi_elem_exec = exec_elem[operation_byte];
else
mipi_elem_exec = NULL;
/* Size of Operation. */
if (connector->panel.vbt.dsi.seq_version >= 3)
operation_size = *data++;
if (mipi_elem_exec) {
const u8 *next = data + operation_size;
data = mipi_elem_exec(intel_dsi, data);
/* Consistency check if we have size. */
if (operation_size && data != next) {
drm_err(&dev_priv->drm,
"Inconsistent operation size\n");
return;
}
} else if (operation_size) {
/* We have size, skip. */
drm_dbg_kms(&dev_priv->drm,
"Unsupported MIPI operation byte %u\n",
operation_byte);
data += operation_size;
} else {
/* No size, can't skip without parsing. */
drm_err(&dev_priv->drm,
"Unsupported MIPI operation byte %u\n",
operation_byte);
return;
}
}
}
void intel_dsi_vbt_exec_sequence(struct intel_dsi *intel_dsi,
enum mipi_seq seq_id)
{
if (seq_id == MIPI_SEQ_POWER_ON && intel_dsi->gpio_panel)
gpiod_set_value_cansleep(intel_dsi->gpio_panel, 1);
if (seq_id == MIPI_SEQ_BACKLIGHT_ON && intel_dsi->gpio_backlight)
gpiod_set_value_cansleep(intel_dsi->gpio_backlight, 1);
intel_dsi_vbt_exec(intel_dsi, seq_id);
if (seq_id == MIPI_SEQ_POWER_OFF && intel_dsi->gpio_panel)
gpiod_set_value_cansleep(intel_dsi->gpio_panel, 0);
if (seq_id == MIPI_SEQ_BACKLIGHT_OFF && intel_dsi->gpio_backlight)
gpiod_set_value_cansleep(intel_dsi->gpio_backlight, 0);
}
void intel_dsi_log_params(struct intel_dsi *intel_dsi)
{
struct drm_i915_private *i915 = to_i915(intel_dsi->base.base.dev);
drm_dbg_kms(&i915->drm, "Pclk %d\n", intel_dsi->pclk);
drm_dbg_kms(&i915->drm, "Pixel overlap %d\n",
intel_dsi->pixel_overlap);
drm_dbg_kms(&i915->drm, "Lane count %d\n", intel_dsi->lane_count);
drm_dbg_kms(&i915->drm, "DPHY param reg 0x%x\n", intel_dsi->dphy_reg);
drm_dbg_kms(&i915->drm, "Video mode format %s\n",
intel_dsi->video_mode == NON_BURST_SYNC_PULSE ?
"non-burst with sync pulse" :
intel_dsi->video_mode == NON_BURST_SYNC_EVENTS ?
"non-burst with sync events" :
intel_dsi->video_mode == BURST_MODE ?
"burst" : "<unknown>");
drm_dbg_kms(&i915->drm, "Burst mode ratio %d\n",
intel_dsi->burst_mode_ratio);
drm_dbg_kms(&i915->drm, "Reset timer %d\n", intel_dsi->rst_timer_val);
drm_dbg_kms(&i915->drm, "Eot %s\n",
str_enabled_disabled(intel_dsi->eotp_pkt));
drm_dbg_kms(&i915->drm, "Clockstop %s\n",
str_enabled_disabled(!intel_dsi->clock_stop));
drm_dbg_kms(&i915->drm, "Mode %s\n",
intel_dsi->operation_mode ? "command" : "video");
if (intel_dsi->dual_link == DSI_DUAL_LINK_FRONT_BACK)
drm_dbg_kms(&i915->drm,
"Dual link: DSI_DUAL_LINK_FRONT_BACK\n");
else if (intel_dsi->dual_link == DSI_DUAL_LINK_PIXEL_ALT)
drm_dbg_kms(&i915->drm,
"Dual link: DSI_DUAL_LINK_PIXEL_ALT\n");
else
drm_dbg_kms(&i915->drm, "Dual link: NONE\n");
drm_dbg_kms(&i915->drm, "Pixel Format %d\n", intel_dsi->pixel_format);
drm_dbg_kms(&i915->drm, "TLPX %d\n", intel_dsi->escape_clk_div);
drm_dbg_kms(&i915->drm, "LP RX Timeout 0x%x\n",
intel_dsi->lp_rx_timeout);
drm_dbg_kms(&i915->drm, "Turnaround Timeout 0x%x\n",
intel_dsi->turn_arnd_val);
drm_dbg_kms(&i915->drm, "Init Count 0x%x\n", intel_dsi->init_count);
drm_dbg_kms(&i915->drm, "HS to LP Count 0x%x\n",
intel_dsi->hs_to_lp_count);
drm_dbg_kms(&i915->drm, "LP Byte Clock %d\n", intel_dsi->lp_byte_clk);
drm_dbg_kms(&i915->drm, "DBI BW Timer 0x%x\n", intel_dsi->bw_timer);
drm_dbg_kms(&i915->drm, "LP to HS Clock Count 0x%x\n",
intel_dsi->clk_lp_to_hs_count);
drm_dbg_kms(&i915->drm, "HS to LP Clock Count 0x%x\n",
intel_dsi->clk_hs_to_lp_count);
drm_dbg_kms(&i915->drm, "BTA %s\n",
str_enabled_disabled(!(intel_dsi->video_frmt_cfg_bits & DISABLE_VIDEO_BTA)));
}
bool intel_dsi_vbt_init(struct intel_dsi *intel_dsi, u16 panel_id)
{
struct drm_device *dev = intel_dsi->base.base.dev;
struct drm_i915_private *dev_priv = to_i915(dev);
struct intel_connector *connector = intel_dsi->attached_connector;
struct mipi_config *mipi_config = connector->panel.vbt.dsi.config;
struct mipi_pps_data *pps = connector->panel.vbt.dsi.pps;
struct drm_display_mode *mode = connector->panel.vbt.lfp_lvds_vbt_mode;
u16 burst_mode_ratio;
enum port port;
drm_dbg_kms(&dev_priv->drm, "\n");
intel_dsi->eotp_pkt = mipi_config->eot_pkt_disabled ? 0 : 1;
intel_dsi->clock_stop = mipi_config->enable_clk_stop ? 1 : 0;
intel_dsi->lane_count = mipi_config->lane_cnt + 1;
intel_dsi->pixel_format =
pixel_format_from_register_bits(
mipi_config->videomode_color_format << 7);
intel_dsi->dual_link = mipi_config->dual_link;
intel_dsi->pixel_overlap = mipi_config->pixel_overlap;
intel_dsi->operation_mode = mipi_config->is_cmd_mode;
intel_dsi->video_mode = mipi_config->video_transfer_mode;
intel_dsi->escape_clk_div = mipi_config->byte_clk_sel;
intel_dsi->lp_rx_timeout = mipi_config->lp_rx_timeout;
intel_dsi->hs_tx_timeout = mipi_config->hs_tx_timeout;
intel_dsi->turn_arnd_val = mipi_config->turn_around_timeout;
intel_dsi->rst_timer_val = mipi_config->device_reset_timer;
intel_dsi->init_count = mipi_config->master_init_timer;
intel_dsi->bw_timer = mipi_config->dbi_bw_timer;
intel_dsi->video_frmt_cfg_bits =
mipi_config->bta_enabled ? DISABLE_VIDEO_BTA : 0;
intel_dsi->bgr_enabled = mipi_config->rgb_flip;
/* Starting point, adjusted depending on dual link and burst mode */
intel_dsi->pclk = mode->clock;
/* In dual link mode each port needs half of pixel clock */
if (intel_dsi->dual_link) {
intel_dsi->pclk /= 2;
/* we can enable pixel_overlap if needed by panel. In this
* case we need to increase the pixelclock for extra pixels
*/
if (intel_dsi->dual_link == DSI_DUAL_LINK_FRONT_BACK) {
intel_dsi->pclk += DIV_ROUND_UP(mode->vtotal * intel_dsi->pixel_overlap * 60, 1000);
}
}
/* Burst Mode Ratio
* Target ddr frequency from VBT / non burst ddr freq
* multiply by 100 to preserve remainder
*/
if (intel_dsi->video_mode == BURST_MODE) {
u32 bitrate;
if (mipi_config->target_burst_mode_freq == 0) {
drm_err(&dev_priv->drm, "Burst mode target is not set\n");
return false;
}
bitrate = intel_dsi_bitrate(intel_dsi);
/*
* Sometimes the VBT contains a slightly lower clock, then
* the bitrate we have calculated, in this case just replace it
* with the calculated bitrate.
*/
if (mipi_config->target_burst_mode_freq < bitrate &&
intel_fuzzy_clock_check(mipi_config->target_burst_mode_freq,
bitrate))
mipi_config->target_burst_mode_freq = bitrate;
if (mipi_config->target_burst_mode_freq < bitrate) {
drm_err(&dev_priv->drm, "Burst mode freq is less than computed\n");
return false;
}
burst_mode_ratio =
DIV_ROUND_UP(mipi_config->target_burst_mode_freq * 100, bitrate);
intel_dsi->pclk = DIV_ROUND_UP(intel_dsi->pclk * burst_mode_ratio, 100);
} else
burst_mode_ratio = 100;
intel_dsi->burst_mode_ratio = burst_mode_ratio;
/* delays in VBT are in unit of 100us, so need to convert
* here in ms
* Delay (100us) * 100 /1000 = Delay / 10 (ms) */
intel_dsi->backlight_off_delay = pps->bl_disable_delay / 10;
intel_dsi->backlight_on_delay = pps->bl_enable_delay / 10;
intel_dsi->panel_on_delay = pps->panel_on_delay / 10;
intel_dsi->panel_off_delay = pps->panel_off_delay / 10;
intel_dsi->panel_pwr_cycle_delay = pps->panel_power_cycle_delay / 10;
intel_dsi->i2c_bus_num = -1;
/* a regular driver would get the device in probe */
for_each_dsi_port(port, intel_dsi->ports) {
mipi_dsi_attach(intel_dsi->dsi_hosts[port]->device);
}
return true;
}
/*
* On some BYT/CHT devs some sequences are incomplete and we need to manually
* control some GPIOs. We need to add a GPIO lookup table before we get these.
* If the GOP did not initialize the panel (HDMI inserted) we may need to also
* change the pinmux for the SoC's PWM0 pin from GPIO to PWM.
*/
static struct gpiod_lookup_table pmic_panel_gpio_table = {
/* Intel GFX is consumer */
.dev_id = "0000:00:02.0",
.table = {
/* Panel EN/DISABLE */
GPIO_LOOKUP("gpio_crystalcove", 94, "panel", GPIO_ACTIVE_HIGH),
{ }
},
};
static struct gpiod_lookup_table soc_panel_gpio_table = {
.dev_id = "0000:00:02.0",
.table = {
GPIO_LOOKUP("INT33FC:01", 10, "backlight", GPIO_ACTIVE_HIGH),
GPIO_LOOKUP("INT33FC:01", 11, "panel", GPIO_ACTIVE_HIGH),
{ }
},
};
static const struct pinctrl_map soc_pwm_pinctrl_map[] = {
PIN_MAP_MUX_GROUP("0000:00:02.0", "soc_pwm0", "INT33FC:00",
"pwm0_grp", "pwm"),
};
void intel_dsi_vbt_gpio_init(struct intel_dsi *intel_dsi, bool panel_is_on)
{
struct drm_device *dev = intel_dsi->base.base.dev;
struct drm_i915_private *dev_priv = to_i915(dev);
struct intel_connector *connector = intel_dsi->attached_connector;
struct mipi_config *mipi_config = connector->panel.vbt.dsi.config;
enum gpiod_flags flags = panel_is_on ? GPIOD_OUT_HIGH : GPIOD_OUT_LOW;
struct gpiod_lookup_table *gpiod_lookup_table = NULL;
bool want_backlight_gpio = false;
bool want_panel_gpio = false;
struct pinctrl *pinctrl;
int ret;
if ((IS_VALLEYVIEW(dev_priv) || IS_CHERRYVIEW(dev_priv)) &&
mipi_config->pwm_blc == PPS_BLC_PMIC) {
gpiod_lookup_table = &pmic_panel_gpio_table;
want_panel_gpio = true;
}
if (IS_VALLEYVIEW(dev_priv) && mipi_config->pwm_blc == PPS_BLC_SOC) {
gpiod_lookup_table = &soc_panel_gpio_table;
want_panel_gpio = true;
want_backlight_gpio = true;
/* Ensure PWM0 pin is muxed as PWM instead of GPIO */
ret = pinctrl_register_mappings(soc_pwm_pinctrl_map,
ARRAY_SIZE(soc_pwm_pinctrl_map));
if (ret)
drm_err(&dev_priv->drm,
"Failed to register pwm0 pinmux mapping\n");
pinctrl = devm_pinctrl_get_select(dev->dev, "soc_pwm0");
if (IS_ERR(pinctrl))
drm_err(&dev_priv->drm,
"Failed to set pinmux to PWM\n");
}
if (gpiod_lookup_table)
gpiod_add_lookup_table(gpiod_lookup_table);
if (want_panel_gpio) {
intel_dsi->gpio_panel = devm_gpiod_get(dev->dev, "panel", flags);
if (IS_ERR(intel_dsi->gpio_panel)) {
drm_err(&dev_priv->drm,
"Failed to own gpio for panel control\n");
intel_dsi->gpio_panel = NULL;
}
}
if (want_backlight_gpio) {
intel_dsi->gpio_backlight =
devm_gpiod_get(dev->dev, "backlight", flags);
if (IS_ERR(intel_dsi->gpio_backlight)) {
drm_err(&dev_priv->drm,
"Failed to own gpio for backlight control\n");
intel_dsi->gpio_backlight = NULL;
}
}
if (gpiod_lookup_table)
gpiod_remove_lookup_table(gpiod_lookup_table);
}