| // SPDX-License-Identifier: GPL-2.0 |
| /* |
| * Copyright 2021 Google LLC. |
| * |
| * Driver for Semtech's SX9360 capacitive proximity/button solution. |
| * Based on SX9360 driver and copy of datasheet at: |
| * https://edit.wpgdadawant.com/uploads/news_file/program/2019/30184/tech_files/program_30184_suggest_other_file.pdf |
| */ |
| |
| #include <linux/acpi.h> |
| #include <linux/bits.h> |
| #include <linux/bitfield.h> |
| #include <linux/delay.h> |
| #include <linux/i2c.h> |
| #include <linux/interrupt.h> |
| #include <linux/kernel.h> |
| #include <linux/log2.h> |
| #include <linux/mod_devicetable.h> |
| #include <linux/module.h> |
| #include <linux/pm.h> |
| #include <linux/property.h> |
| #include <linux/regmap.h> |
| |
| #include <linux/iio/iio.h> |
| |
| #include "sx_common.h" |
| |
| /* Nominal Oscillator Frequency. */ |
| #define SX9360_FOSC_MHZ 4 |
| #define SX9360_FOSC_HZ (SX9360_FOSC_MHZ * 1000000) |
| |
| /* Register definitions. */ |
| #define SX9360_REG_IRQ_SRC SX_COMMON_REG_IRQ_SRC |
| #define SX9360_REG_STAT 0x01 |
| #define SX9360_REG_STAT_COMPSTAT_MASK GENMASK(2, 1) |
| #define SX9360_REG_IRQ_MSK 0x02 |
| #define SX9360_CONVDONE_IRQ BIT(0) |
| #define SX9360_FAR_IRQ BIT(2) |
| #define SX9360_CLOSE_IRQ BIT(3) |
| #define SX9360_REG_IRQ_CFG 0x03 |
| |
| #define SX9360_REG_GNRL_CTRL0 0x10 |
| #define SX9360_REG_GNRL_CTRL0_PHEN_MASK GENMASK(1, 0) |
| #define SX9360_REG_GNRL_CTRL1 0x11 |
| #define SX9360_REG_GNRL_CTRL1_SCANPERIOD_MASK GENMASK(2, 0) |
| #define SX9360_REG_GNRL_CTRL2 0x12 |
| #define SX9360_REG_GNRL_CTRL2_PERIOD_102MS 0x32 |
| #define SX9360_REG_GNRL_REG_2_PERIOD_MS(_r) \ |
| (((_r) * 8192) / (SX9360_FOSC_HZ / 1000)) |
| #define SX9360_REG_GNRL_FREQ_2_REG(_f) (((_f) * 8192) / SX9360_FOSC_HZ) |
| #define SX9360_REG_GNRL_REG_2_FREQ(_r) (SX9360_FOSC_HZ / ((_r) * 8192)) |
| |
| #define SX9360_REG_AFE_CTRL1 0x21 |
| #define SX9360_REG_AFE_CTRL1_RESFILTIN_MASK GENMASK(3, 0) |
| #define SX9360_REG_AFE_CTRL1_RESFILTIN_0OHMS 0 |
| #define SX9360_REG_AFE_PARAM0_PHR 0x22 |
| #define SX9360_REG_AFE_PARAM1_PHR 0x23 |
| #define SX9360_REG_AFE_PARAM0_PHM 0x24 |
| #define SX9360_REG_AFE_PARAM0_RSVD 0x08 |
| #define SX9360_REG_AFE_PARAM0_RESOLUTION_MASK GENMASK(2, 0) |
| #define SX9360_REG_AFE_PARAM0_RESOLUTION_128 0x02 |
| #define SX9360_REG_AFE_PARAM1_PHM 0x25 |
| #define SX9360_REG_AFE_PARAM1_AGAIN_PHM_6PF 0x40 |
| #define SX9360_REG_AFE_PARAM1_FREQ_83_33HZ 0x06 |
| |
| #define SX9360_REG_PROX_CTRL0_PHR 0x40 |
| #define SX9360_REG_PROX_CTRL0_PHM 0x41 |
| #define SX9360_REG_PROX_CTRL0_GAIN_MASK GENMASK(5, 3) |
| #define SX9360_REG_PROX_CTRL0_GAIN_1 0x80 |
| #define SX9360_REG_PROX_CTRL0_RAWFILT_MASK GENMASK(2, 0) |
| #define SX9360_REG_PROX_CTRL0_RAWFILT_1P50 0x01 |
| #define SX9360_REG_PROX_CTRL1 0x42 |
| #define SX9360_REG_PROX_CTRL1_AVGNEG_THRESH_MASK GENMASK(5, 3) |
| #define SX9360_REG_PROX_CTRL1_AVGNEG_THRESH_16K 0x20 |
| #define SX9360_REG_PROX_CTRL2 0x43 |
| #define SX9360_REG_PROX_CTRL2_AVGDEB_MASK GENMASK(7, 6) |
| #define SX9360_REG_PROX_CTRL2_AVGDEB_2SAMPLES 0x40 |
| #define SX9360_REG_PROX_CTRL2_AVGPOS_THRESH_16K 0x20 |
| #define SX9360_REG_PROX_CTRL3 0x44 |
| #define SX9360_REG_PROX_CTRL3_AVGNEG_FILT_MASK GENMASK(5, 3) |
| #define SX9360_REG_PROX_CTRL3_AVGNEG_FILT_2 0x08 |
| #define SX9360_REG_PROX_CTRL3_AVGPOS_FILT_MASK GENMASK(2, 0) |
| #define SX9360_REG_PROX_CTRL3_AVGPOS_FILT_256 0x04 |
| #define SX9360_REG_PROX_CTRL4 0x45 |
| #define SX9360_REG_PROX_CTRL4_HYST_MASK GENMASK(5, 4) |
| #define SX9360_REG_PROX_CTRL4_CLOSE_DEBOUNCE_MASK GENMASK(3, 2) |
| #define SX9360_REG_PROX_CTRL4_FAR_DEBOUNCE_MASK GENMASK(1, 0) |
| #define SX9360_REG_PROX_CTRL5 0x46 |
| #define SX9360_REG_PROX_CTRL5_PROXTHRESH_32 0x08 |
| |
| #define SX9360_REG_REF_CORR0 0x60 |
| #define SX9360_REG_REF_CORR1 0x61 |
| |
| #define SX9360_REG_USEFUL_PHR_MSB 0x90 |
| #define SX9360_REG_USEFUL_PHR_LSB 0x91 |
| |
| #define SX9360_REG_OFFSET_PMR_MSB 0x92 |
| #define SX9360_REG_OFFSET_PMR_LSB 0x93 |
| |
| #define SX9360_REG_USEFUL_PHM_MSB 0x94 |
| #define SX9360_REG_USEFUL_PHM_LSB 0x95 |
| |
| #define SX9360_REG_AVG_PHM_MSB 0x96 |
| #define SX9360_REG_AVG_PHM_LSB 0x97 |
| |
| #define SX9360_REG_DIFF_PHM_MSB 0x98 |
| #define SX9360_REG_DIFF_PHM_LSB 0x99 |
| |
| #define SX9360_REG_OFFSET_PHM_MSB 0x9a |
| #define SX9360_REG_OFFSET_PHM_LSB 0x9b |
| |
| #define SX9360_REG_USE_FILTER_MSB 0x9a |
| #define SX9360_REG_USE_FILTER_LSB 0x9b |
| |
| #define SX9360_REG_RESET 0xcf |
| /* Write this to REG_RESET to do a soft reset. */ |
| #define SX9360_SOFT_RESET 0xde |
| |
| #define SX9360_REG_WHOAMI 0xfa |
| #define SX9360_WHOAMI_VALUE 0x60 |
| |
| #define SX9360_REG_REVISION 0xfe |
| |
| /* 2 channels, Phase Reference and Measurement. */ |
| #define SX9360_NUM_CHANNELS 2 |
| |
| static const struct iio_chan_spec sx9360_channels[] = { |
| { |
| .type = IIO_PROXIMITY, |
| .info_mask_separate = BIT(IIO_CHAN_INFO_RAW) | |
| BIT(IIO_CHAN_INFO_HARDWAREGAIN), |
| .info_mask_shared_by_all = BIT(IIO_CHAN_INFO_SAMP_FREQ), |
| .info_mask_separate_available = |
| BIT(IIO_CHAN_INFO_HARDWAREGAIN), |
| .info_mask_shared_by_all_available = |
| BIT(IIO_CHAN_INFO_SAMP_FREQ), |
| .indexed = 1, |
| .address = SX9360_REG_USEFUL_PHR_MSB, |
| .channel = 0, |
| .scan_index = 0, |
| .scan_type = { |
| .sign = 's', |
| .realbits = 12, |
| .storagebits = 16, |
| .endianness = IIO_BE, |
| }, |
| }, |
| { |
| .type = IIO_PROXIMITY, |
| .info_mask_separate = BIT(IIO_CHAN_INFO_RAW) | |
| BIT(IIO_CHAN_INFO_HARDWAREGAIN), |
| .info_mask_shared_by_all = BIT(IIO_CHAN_INFO_SAMP_FREQ), |
| .info_mask_separate_available = |
| BIT(IIO_CHAN_INFO_HARDWAREGAIN), |
| .info_mask_shared_by_all_available = |
| BIT(IIO_CHAN_INFO_SAMP_FREQ), |
| .indexed = 1, |
| .address = SX9360_REG_USEFUL_PHM_MSB, |
| .event_spec = sx_common_events, |
| .num_event_specs = ARRAY_SIZE(sx_common_events), |
| .channel = 1, |
| .scan_index = 1, |
| .scan_type = { |
| .sign = 's', |
| .realbits = 12, |
| .storagebits = 16, |
| .endianness = IIO_BE, |
| }, |
| }, |
| IIO_CHAN_SOFT_TIMESTAMP(2), |
| }; |
| |
| /* |
| * Each entry contains the integer part (val) and the fractional part, in micro |
| * seconds. It conforms to the IIO output IIO_VAL_INT_PLUS_MICRO. |
| * |
| * The frequency control register holds the period, with a ~2ms increment. |
| * Therefore the smallest frequency is 4MHz / (2047 * 8192), |
| * The fastest is 4MHz / 8192. |
| * The interval is not linear, but given there is 2047 possible value, |
| * Returns the fake increment of (Max-Min)/2047 |
| */ |
| static const struct { |
| int val; |
| int val2; |
| } sx9360_samp_freq_interval[] = { |
| { 0, 281250 }, /* 4MHz / (8192 * 2047) */ |
| { 0, 281250 }, |
| { 448, 281250 }, /* 4MHz / 8192 */ |
| }; |
| |
| static const struct regmap_range sx9360_writable_reg_ranges[] = { |
| /* |
| * To set COMPSTAT for compensation, even if datasheet says register is |
| * RO. |
| */ |
| regmap_reg_range(SX9360_REG_STAT, SX9360_REG_IRQ_CFG), |
| regmap_reg_range(SX9360_REG_GNRL_CTRL0, SX9360_REG_GNRL_CTRL2), |
| regmap_reg_range(SX9360_REG_AFE_CTRL1, SX9360_REG_AFE_PARAM1_PHM), |
| regmap_reg_range(SX9360_REG_PROX_CTRL0_PHR, SX9360_REG_PROX_CTRL5), |
| regmap_reg_range(SX9360_REG_REF_CORR0, SX9360_REG_REF_CORR1), |
| regmap_reg_range(SX9360_REG_OFFSET_PMR_MSB, SX9360_REG_OFFSET_PMR_LSB), |
| regmap_reg_range(SX9360_REG_RESET, SX9360_REG_RESET), |
| }; |
| |
| static const struct regmap_access_table sx9360_writeable_regs = { |
| .yes_ranges = sx9360_writable_reg_ranges, |
| .n_yes_ranges = ARRAY_SIZE(sx9360_writable_reg_ranges), |
| }; |
| |
| /* |
| * All allocated registers are readable, so we just list unallocated |
| * ones. |
| */ |
| static const struct regmap_range sx9360_non_readable_reg_ranges[] = { |
| regmap_reg_range(SX9360_REG_IRQ_CFG + 1, SX9360_REG_GNRL_CTRL0 - 1), |
| regmap_reg_range(SX9360_REG_GNRL_CTRL2 + 1, SX9360_REG_AFE_CTRL1 - 1), |
| regmap_reg_range(SX9360_REG_AFE_PARAM1_PHM + 1, |
| SX9360_REG_PROX_CTRL0_PHR - 1), |
| regmap_reg_range(SX9360_REG_PROX_CTRL5 + 1, SX9360_REG_REF_CORR0 - 1), |
| regmap_reg_range(SX9360_REG_REF_CORR1 + 1, |
| SX9360_REG_USEFUL_PHR_MSB - 1), |
| regmap_reg_range(SX9360_REG_USE_FILTER_LSB + 1, SX9360_REG_RESET - 1), |
| regmap_reg_range(SX9360_REG_RESET + 1, SX9360_REG_WHOAMI - 1), |
| regmap_reg_range(SX9360_REG_WHOAMI + 1, SX9360_REG_REVISION - 1), |
| }; |
| |
| static const struct regmap_access_table sx9360_readable_regs = { |
| .no_ranges = sx9360_non_readable_reg_ranges, |
| .n_no_ranges = ARRAY_SIZE(sx9360_non_readable_reg_ranges), |
| }; |
| |
| static const struct regmap_range sx9360_volatile_reg_ranges[] = { |
| regmap_reg_range(SX9360_REG_IRQ_SRC, SX9360_REG_STAT), |
| regmap_reg_range(SX9360_REG_USEFUL_PHR_MSB, SX9360_REG_USE_FILTER_LSB), |
| regmap_reg_range(SX9360_REG_WHOAMI, SX9360_REG_WHOAMI), |
| regmap_reg_range(SX9360_REG_REVISION, SX9360_REG_REVISION), |
| }; |
| |
| static const struct regmap_access_table sx9360_volatile_regs = { |
| .yes_ranges = sx9360_volatile_reg_ranges, |
| .n_yes_ranges = ARRAY_SIZE(sx9360_volatile_reg_ranges), |
| }; |
| |
| static const struct regmap_config sx9360_regmap_config = { |
| .reg_bits = 8, |
| .val_bits = 8, |
| |
| .max_register = SX9360_REG_REVISION, |
| .cache_type = REGCACHE_RBTREE, |
| |
| .wr_table = &sx9360_writeable_regs, |
| .rd_table = &sx9360_readable_regs, |
| .volatile_table = &sx9360_volatile_regs, |
| }; |
| |
| static int sx9360_read_prox_data(struct sx_common_data *data, |
| const struct iio_chan_spec *chan, |
| __be16 *val) |
| { |
| return regmap_bulk_read(data->regmap, chan->address, val, sizeof(*val)); |
| } |
| |
| /* |
| * If we have no interrupt support, we have to wait for a scan period |
| * after enabling a channel to get a result. |
| */ |
| static int sx9360_wait_for_sample(struct sx_common_data *data) |
| { |
| int ret; |
| __be16 buf; |
| |
| ret = regmap_bulk_read(data->regmap, SX9360_REG_GNRL_CTRL1, |
| &buf, sizeof(buf)); |
| if (ret < 0) |
| return ret; |
| msleep(SX9360_REG_GNRL_REG_2_PERIOD_MS(be16_to_cpu(buf))); |
| |
| return 0; |
| } |
| |
| static int sx9360_read_gain(struct sx_common_data *data, |
| const struct iio_chan_spec *chan, int *val) |
| { |
| unsigned int reg, regval; |
| int ret; |
| |
| reg = SX9360_REG_PROX_CTRL0_PHR + chan->channel; |
| ret = regmap_read(data->regmap, reg, ®val); |
| if (ret) |
| return ret; |
| |
| *val = 1 << FIELD_GET(SX9360_REG_PROX_CTRL0_GAIN_MASK, regval); |
| |
| return IIO_VAL_INT; |
| } |
| |
| static int sx9360_read_samp_freq(struct sx_common_data *data, |
| int *val, int *val2) |
| { |
| int ret, divisor; |
| __be16 buf; |
| |
| ret = regmap_bulk_read(data->regmap, SX9360_REG_GNRL_CTRL1, |
| &buf, sizeof(buf)); |
| if (ret < 0) |
| return ret; |
| divisor = be16_to_cpu(buf); |
| if (divisor == 0) { |
| *val = 0; |
| return IIO_VAL_INT; |
| } |
| |
| *val = SX9360_FOSC_HZ; |
| *val2 = divisor * 8192; |
| |
| return IIO_VAL_FRACTIONAL; |
| } |
| |
| static int sx9360_read_raw(struct iio_dev *indio_dev, |
| const struct iio_chan_spec *chan, |
| int *val, int *val2, long mask) |
| { |
| struct sx_common_data *data = iio_priv(indio_dev); |
| |
| switch (mask) { |
| case IIO_CHAN_INFO_RAW: |
| iio_device_claim_direct_scoped(return -EBUSY, indio_dev) |
| return sx_common_read_proximity(data, chan, val); |
| unreachable(); |
| case IIO_CHAN_INFO_HARDWAREGAIN: |
| iio_device_claim_direct_scoped(return -EBUSY, indio_dev) |
| return sx9360_read_gain(data, chan, val); |
| unreachable(); |
| case IIO_CHAN_INFO_SAMP_FREQ: |
| return sx9360_read_samp_freq(data, val, val2); |
| default: |
| return -EINVAL; |
| } |
| } |
| |
| static const char *sx9360_channel_labels[SX9360_NUM_CHANNELS] = { |
| "reference", "main", |
| }; |
| |
| static int sx9360_read_label(struct iio_dev *iio_dev, const struct iio_chan_spec *chan, |
| char *label) |
| { |
| return sysfs_emit(label, "%s\n", sx9360_channel_labels[chan->channel]); |
| } |
| |
| static const int sx9360_gain_vals[] = { 1, 2, 4, 8 }; |
| |
| static int sx9360_read_avail(struct iio_dev *indio_dev, |
| struct iio_chan_spec const *chan, |
| const int **vals, int *type, int *length, |
| long mask) |
| { |
| if (chan->type != IIO_PROXIMITY) |
| return -EINVAL; |
| |
| switch (mask) { |
| case IIO_CHAN_INFO_HARDWAREGAIN: |
| *type = IIO_VAL_INT; |
| *length = ARRAY_SIZE(sx9360_gain_vals); |
| *vals = sx9360_gain_vals; |
| return IIO_AVAIL_LIST; |
| case IIO_CHAN_INFO_SAMP_FREQ: |
| *type = IIO_VAL_INT_PLUS_MICRO; |
| *length = ARRAY_SIZE(sx9360_samp_freq_interval) * 2; |
| *vals = (int *)sx9360_samp_freq_interval; |
| return IIO_AVAIL_RANGE; |
| default: |
| return -EINVAL; |
| } |
| } |
| |
| static int sx9360_set_samp_freq(struct sx_common_data *data, |
| int val, int val2) |
| { |
| int reg; |
| __be16 buf; |
| |
| reg = val * 8192 / SX9360_FOSC_HZ + val2 * 8192 / (SX9360_FOSC_MHZ); |
| buf = cpu_to_be16(reg); |
| guard(mutex)(&data->mutex); |
| |
| return regmap_bulk_write(data->regmap, SX9360_REG_GNRL_CTRL1, &buf, |
| sizeof(buf)); |
| } |
| |
| static int sx9360_read_thresh(struct sx_common_data *data, int *val) |
| { |
| unsigned int regval; |
| int ret; |
| |
| ret = regmap_read(data->regmap, SX9360_REG_PROX_CTRL5, ®val); |
| if (ret) |
| return ret; |
| |
| if (regval <= 1) |
| *val = regval; |
| else |
| *val = (regval * regval) / 2; |
| |
| return IIO_VAL_INT; |
| } |
| |
| static int sx9360_read_hysteresis(struct sx_common_data *data, int *val) |
| { |
| unsigned int regval, pthresh; |
| int ret; |
| |
| ret = sx9360_read_thresh(data, &pthresh); |
| if (ret < 0) |
| return ret; |
| |
| ret = regmap_read(data->regmap, SX9360_REG_PROX_CTRL4, ®val); |
| if (ret) |
| return ret; |
| |
| regval = FIELD_GET(SX9360_REG_PROX_CTRL4_HYST_MASK, regval); |
| if (!regval) |
| *val = 0; |
| else |
| *val = pthresh >> (5 - regval); |
| |
| return IIO_VAL_INT; |
| } |
| |
| static int sx9360_read_far_debounce(struct sx_common_data *data, int *val) |
| { |
| unsigned int regval; |
| int ret; |
| |
| ret = regmap_read(data->regmap, SX9360_REG_PROX_CTRL4, ®val); |
| if (ret) |
| return ret; |
| |
| regval = FIELD_GET(SX9360_REG_PROX_CTRL4_FAR_DEBOUNCE_MASK, regval); |
| if (regval) |
| *val = 1 << regval; |
| else |
| *val = 0; |
| |
| return IIO_VAL_INT; |
| } |
| |
| static int sx9360_read_close_debounce(struct sx_common_data *data, int *val) |
| { |
| unsigned int regval; |
| int ret; |
| |
| ret = regmap_read(data->regmap, SX9360_REG_PROX_CTRL4, ®val); |
| if (ret) |
| return ret; |
| |
| regval = FIELD_GET(SX9360_REG_PROX_CTRL4_CLOSE_DEBOUNCE_MASK, regval); |
| if (regval) |
| *val = 1 << regval; |
| else |
| *val = 0; |
| |
| return IIO_VAL_INT; |
| } |
| |
| static int sx9360_read_event_val(struct iio_dev *indio_dev, |
| const struct iio_chan_spec *chan, |
| enum iio_event_type type, |
| enum iio_event_direction dir, |
| enum iio_event_info info, int *val, int *val2) |
| { |
| struct sx_common_data *data = iio_priv(indio_dev); |
| |
| if (chan->type != IIO_PROXIMITY) |
| return -EINVAL; |
| |
| switch (info) { |
| case IIO_EV_INFO_VALUE: |
| return sx9360_read_thresh(data, val); |
| case IIO_EV_INFO_PERIOD: |
| switch (dir) { |
| case IIO_EV_DIR_RISING: |
| return sx9360_read_far_debounce(data, val); |
| case IIO_EV_DIR_FALLING: |
| return sx9360_read_close_debounce(data, val); |
| default: |
| return -EINVAL; |
| } |
| case IIO_EV_INFO_HYSTERESIS: |
| return sx9360_read_hysteresis(data, val); |
| default: |
| return -EINVAL; |
| } |
| } |
| |
| static int sx9360_write_thresh(struct sx_common_data *data, int _val) |
| { |
| unsigned int val = _val; |
| |
| if (val >= 1) |
| val = int_sqrt(2 * val); |
| |
| if (val > 0xff) |
| return -EINVAL; |
| |
| guard(mutex)(&data->mutex); |
| return regmap_write(data->regmap, SX9360_REG_PROX_CTRL5, val); |
| } |
| |
| static int sx9360_write_hysteresis(struct sx_common_data *data, int _val) |
| { |
| unsigned int hyst, val = _val; |
| int ret, pthresh; |
| |
| ret = sx9360_read_thresh(data, &pthresh); |
| if (ret < 0) |
| return ret; |
| |
| if (val == 0) |
| hyst = 0; |
| else if (val >= pthresh >> 2) |
| hyst = 3; |
| else if (val >= pthresh >> 3) |
| hyst = 2; |
| else if (val >= pthresh >> 4) |
| hyst = 1; |
| else |
| return -EINVAL; |
| |
| hyst = FIELD_PREP(SX9360_REG_PROX_CTRL4_HYST_MASK, hyst); |
| guard(mutex)(&data->mutex); |
| return regmap_update_bits(data->regmap, SX9360_REG_PROX_CTRL4, |
| SX9360_REG_PROX_CTRL4_HYST_MASK, hyst); |
| } |
| |
| static int sx9360_write_far_debounce(struct sx_common_data *data, int _val) |
| { |
| unsigned int regval, val = _val; |
| |
| if (val > 0) |
| val = ilog2(val); |
| if (!FIELD_FIT(SX9360_REG_PROX_CTRL4_FAR_DEBOUNCE_MASK, val)) |
| return -EINVAL; |
| |
| regval = FIELD_PREP(SX9360_REG_PROX_CTRL4_FAR_DEBOUNCE_MASK, val); |
| |
| guard(mutex)(&data->mutex); |
| return regmap_update_bits(data->regmap, SX9360_REG_PROX_CTRL4, |
| SX9360_REG_PROX_CTRL4_FAR_DEBOUNCE_MASK, |
| regval); |
| } |
| |
| static int sx9360_write_close_debounce(struct sx_common_data *data, int _val) |
| { |
| unsigned int regval, val = _val; |
| |
| if (val > 0) |
| val = ilog2(val); |
| if (!FIELD_FIT(SX9360_REG_PROX_CTRL4_CLOSE_DEBOUNCE_MASK, val)) |
| return -EINVAL; |
| |
| regval = FIELD_PREP(SX9360_REG_PROX_CTRL4_CLOSE_DEBOUNCE_MASK, val); |
| |
| guard(mutex)(&data->mutex); |
| return regmap_update_bits(data->regmap, SX9360_REG_PROX_CTRL4, |
| SX9360_REG_PROX_CTRL4_CLOSE_DEBOUNCE_MASK, |
| regval); |
| } |
| |
| static int sx9360_write_event_val(struct iio_dev *indio_dev, |
| const struct iio_chan_spec *chan, |
| enum iio_event_type type, |
| enum iio_event_direction dir, |
| enum iio_event_info info, int val, int val2) |
| { |
| struct sx_common_data *data = iio_priv(indio_dev); |
| |
| if (chan->type != IIO_PROXIMITY) |
| return -EINVAL; |
| |
| switch (info) { |
| case IIO_EV_INFO_VALUE: |
| return sx9360_write_thresh(data, val); |
| case IIO_EV_INFO_PERIOD: |
| switch (dir) { |
| case IIO_EV_DIR_RISING: |
| return sx9360_write_far_debounce(data, val); |
| case IIO_EV_DIR_FALLING: |
| return sx9360_write_close_debounce(data, val); |
| default: |
| return -EINVAL; |
| } |
| case IIO_EV_INFO_HYSTERESIS: |
| return sx9360_write_hysteresis(data, val); |
| default: |
| return -EINVAL; |
| } |
| } |
| |
| static int sx9360_write_gain(struct sx_common_data *data, |
| const struct iio_chan_spec *chan, int val) |
| { |
| unsigned int gain, reg; |
| |
| gain = ilog2(val); |
| reg = SX9360_REG_PROX_CTRL0_PHR + chan->channel; |
| gain = FIELD_PREP(SX9360_REG_PROX_CTRL0_GAIN_MASK, gain); |
| |
| guard(mutex)(&data->mutex); |
| return regmap_update_bits(data->regmap, reg, |
| SX9360_REG_PROX_CTRL0_GAIN_MASK, |
| gain); |
| } |
| |
| static int sx9360_write_raw(struct iio_dev *indio_dev, |
| const struct iio_chan_spec *chan, int val, int val2, |
| long mask) |
| { |
| struct sx_common_data *data = iio_priv(indio_dev); |
| |
| switch (mask) { |
| case IIO_CHAN_INFO_SAMP_FREQ: |
| return sx9360_set_samp_freq(data, val, val2); |
| case IIO_CHAN_INFO_HARDWAREGAIN: |
| return sx9360_write_gain(data, chan, val); |
| default: |
| return -EINVAL; |
| } |
| } |
| |
| static const struct sx_common_reg_default sx9360_default_regs[] = { |
| { SX9360_REG_IRQ_MSK, 0x00 }, |
| { SX9360_REG_IRQ_CFG, 0x00, "irq_cfg" }, |
| /* |
| * The lower 2 bits should not be set as it enable sensors measurements. |
| * Turning the detection on before the configuration values are set to |
| * good values can cause the device to return erroneous readings. |
| */ |
| { SX9360_REG_GNRL_CTRL0, 0x00, "gnrl_ctrl0" }, |
| { SX9360_REG_GNRL_CTRL1, 0x00, "gnrl_ctrl1" }, |
| { SX9360_REG_GNRL_CTRL2, SX9360_REG_GNRL_CTRL2_PERIOD_102MS, "gnrl_ctrl2" }, |
| |
| { SX9360_REG_AFE_CTRL1, SX9360_REG_AFE_CTRL1_RESFILTIN_0OHMS, "afe_ctrl0" }, |
| { SX9360_REG_AFE_PARAM0_PHR, SX9360_REG_AFE_PARAM0_RSVD | |
| SX9360_REG_AFE_PARAM0_RESOLUTION_128, "afe_param0_phr" }, |
| { SX9360_REG_AFE_PARAM1_PHR, SX9360_REG_AFE_PARAM1_AGAIN_PHM_6PF | |
| SX9360_REG_AFE_PARAM1_FREQ_83_33HZ, "afe_param1_phr" }, |
| { SX9360_REG_AFE_PARAM0_PHM, SX9360_REG_AFE_PARAM0_RSVD | |
| SX9360_REG_AFE_PARAM0_RESOLUTION_128, "afe_param0_phm" }, |
| { SX9360_REG_AFE_PARAM1_PHM, SX9360_REG_AFE_PARAM1_AGAIN_PHM_6PF | |
| SX9360_REG_AFE_PARAM1_FREQ_83_33HZ, "afe_param1_phm" }, |
| |
| { SX9360_REG_PROX_CTRL0_PHR, SX9360_REG_PROX_CTRL0_GAIN_1 | |
| SX9360_REG_PROX_CTRL0_RAWFILT_1P50, "prox_ctrl0_phr" }, |
| { SX9360_REG_PROX_CTRL0_PHM, SX9360_REG_PROX_CTRL0_GAIN_1 | |
| SX9360_REG_PROX_CTRL0_RAWFILT_1P50, "prox_ctrl0_phm" }, |
| { SX9360_REG_PROX_CTRL1, SX9360_REG_PROX_CTRL1_AVGNEG_THRESH_16K, "prox_ctrl1" }, |
| { SX9360_REG_PROX_CTRL2, SX9360_REG_PROX_CTRL2_AVGDEB_2SAMPLES | |
| SX9360_REG_PROX_CTRL2_AVGPOS_THRESH_16K, "prox_ctrl2" }, |
| { SX9360_REG_PROX_CTRL3, SX9360_REG_PROX_CTRL3_AVGNEG_FILT_2 | |
| SX9360_REG_PROX_CTRL3_AVGPOS_FILT_256, "prox_ctrl3" }, |
| { SX9360_REG_PROX_CTRL4, 0x00, "prox_ctrl4" }, |
| { SX9360_REG_PROX_CTRL5, SX9360_REG_PROX_CTRL5_PROXTHRESH_32, "prox_ctrl5" }, |
| }; |
| |
| /* Activate all channels and perform an initial compensation. */ |
| static int sx9360_init_compensation(struct iio_dev *indio_dev) |
| { |
| struct sx_common_data *data = iio_priv(indio_dev); |
| unsigned int val; |
| int ret; |
| |
| /* run the compensation phase on all channels */ |
| ret = regmap_update_bits(data->regmap, SX9360_REG_STAT, |
| SX9360_REG_STAT_COMPSTAT_MASK, |
| SX9360_REG_STAT_COMPSTAT_MASK); |
| if (ret) |
| return ret; |
| |
| return regmap_read_poll_timeout(data->regmap, SX9360_REG_STAT, val, |
| !(val & SX9360_REG_STAT_COMPSTAT_MASK), |
| 20000, 2000000); |
| } |
| |
| static const struct sx_common_reg_default * |
| sx9360_get_default_reg(struct device *dev, int idx, |
| struct sx_common_reg_default *reg_def) |
| { |
| u32 raw = 0, pos = 0; |
| int ret; |
| |
| memcpy(reg_def, &sx9360_default_regs[idx], sizeof(*reg_def)); |
| switch (reg_def->reg) { |
| case SX9360_REG_AFE_CTRL1: |
| ret = device_property_read_u32(dev, |
| "semtech,input-precharge-resistor-ohms", |
| &raw); |
| if (ret) |
| break; |
| |
| reg_def->def &= ~SX9360_REG_AFE_CTRL1_RESFILTIN_MASK; |
| reg_def->def |= FIELD_PREP(SX9360_REG_AFE_CTRL1_RESFILTIN_MASK, |
| raw / 2000); |
| break; |
| case SX9360_REG_AFE_PARAM0_PHR: |
| case SX9360_REG_AFE_PARAM0_PHM: |
| ret = device_property_read_u32(dev, "semtech,resolution", &raw); |
| if (ret) |
| break; |
| |
| raw = ilog2(raw) - 3; |
| |
| reg_def->def &= ~SX9360_REG_AFE_PARAM0_RESOLUTION_MASK; |
| reg_def->def |= FIELD_PREP(SX9360_REG_AFE_PARAM0_RESOLUTION_MASK, raw); |
| break; |
| case SX9360_REG_PROX_CTRL0_PHR: |
| case SX9360_REG_PROX_CTRL0_PHM: |
| ret = device_property_read_u32(dev, "semtech,proxraw-strength", &raw); |
| if (ret) |
| break; |
| |
| reg_def->def &= ~SX9360_REG_PROX_CTRL0_RAWFILT_MASK; |
| reg_def->def |= FIELD_PREP(SX9360_REG_PROX_CTRL0_RAWFILT_MASK, raw); |
| break; |
| case SX9360_REG_PROX_CTRL3: |
| ret = device_property_read_u32(dev, "semtech,avg-pos-strength", |
| &pos); |
| if (ret) |
| break; |
| |
| /* Powers of 2, except for a gap between 16 and 64 */ |
| raw = clamp(ilog2(pos), 3, 11) - (pos >= 32 ? 4 : 3); |
| reg_def->def &= ~SX9360_REG_PROX_CTRL3_AVGPOS_FILT_MASK; |
| reg_def->def |= FIELD_PREP(SX9360_REG_PROX_CTRL3_AVGPOS_FILT_MASK, raw); |
| break; |
| } |
| |
| return reg_def; |
| } |
| |
| static int sx9360_check_whoami(struct device *dev, struct iio_dev *indio_dev) |
| { |
| /* |
| * Only one sensor for this driver. Assuming the device tree |
| * is correct, just set the sensor name. |
| */ |
| indio_dev->name = "sx9360"; |
| return 0; |
| } |
| |
| static const struct sx_common_chip_info sx9360_chip_info = { |
| .reg_stat = SX9360_REG_STAT, |
| .reg_irq_msk = SX9360_REG_IRQ_MSK, |
| .reg_enable_chan = SX9360_REG_GNRL_CTRL0, |
| .reg_reset = SX9360_REG_RESET, |
| |
| .mask_enable_chan = SX9360_REG_GNRL_CTRL0_PHEN_MASK, |
| .stat_offset = 2, |
| .num_channels = SX9360_NUM_CHANNELS, |
| .num_default_regs = ARRAY_SIZE(sx9360_default_regs), |
| |
| .ops = { |
| .read_prox_data = sx9360_read_prox_data, |
| .check_whoami = sx9360_check_whoami, |
| .init_compensation = sx9360_init_compensation, |
| .wait_for_sample = sx9360_wait_for_sample, |
| .get_default_reg = sx9360_get_default_reg, |
| }, |
| |
| .iio_channels = sx9360_channels, |
| .num_iio_channels = ARRAY_SIZE(sx9360_channels), |
| .iio_info = { |
| .read_raw = sx9360_read_raw, |
| .read_avail = sx9360_read_avail, |
| .read_label = sx9360_read_label, |
| .read_event_value = sx9360_read_event_val, |
| .write_event_value = sx9360_write_event_val, |
| .write_raw = sx9360_write_raw, |
| .read_event_config = sx_common_read_event_config, |
| .write_event_config = sx_common_write_event_config, |
| }, |
| }; |
| |
| static int sx9360_probe(struct i2c_client *client) |
| { |
| return sx_common_probe(client, &sx9360_chip_info, &sx9360_regmap_config); |
| } |
| |
| static int sx9360_suspend(struct device *dev) |
| { |
| struct sx_common_data *data = iio_priv(dev_get_drvdata(dev)); |
| unsigned int regval; |
| int ret; |
| |
| disable_irq_nosync(data->client->irq); |
| |
| guard(mutex)(&data->mutex); |
| ret = regmap_read(data->regmap, SX9360_REG_GNRL_CTRL0, ®val); |
| if (ret < 0) |
| return ret; |
| |
| data->suspend_ctrl = |
| FIELD_GET(SX9360_REG_GNRL_CTRL0_PHEN_MASK, regval); |
| |
| |
| /* Disable all phases, send the device to sleep. */ |
| return regmap_write(data->regmap, SX9360_REG_GNRL_CTRL0, 0); |
| } |
| |
| static int sx9360_resume(struct device *dev) |
| { |
| struct sx_common_data *data = iio_priv(dev_get_drvdata(dev)); |
| |
| scoped_guard(mutex, &data->mutex) { |
| int ret = regmap_update_bits(data->regmap, |
| SX9360_REG_GNRL_CTRL0, |
| SX9360_REG_GNRL_CTRL0_PHEN_MASK, |
| data->suspend_ctrl); |
| if (ret) |
| return ret; |
| } |
| enable_irq(data->client->irq); |
| return 0; |
| } |
| |
| static DEFINE_SIMPLE_DEV_PM_OPS(sx9360_pm_ops, sx9360_suspend, sx9360_resume); |
| |
| static const struct acpi_device_id sx9360_acpi_match[] = { |
| { "STH9360", SX9360_WHOAMI_VALUE }, |
| { "SAMM0208", SX9360_WHOAMI_VALUE }, |
| { } |
| }; |
| MODULE_DEVICE_TABLE(acpi, sx9360_acpi_match); |
| |
| static const struct of_device_id sx9360_of_match[] = { |
| { .compatible = "semtech,sx9360", (void *)SX9360_WHOAMI_VALUE }, |
| { } |
| }; |
| MODULE_DEVICE_TABLE(of, sx9360_of_match); |
| |
| static const struct i2c_device_id sx9360_id[] = { |
| {"sx9360", SX9360_WHOAMI_VALUE }, |
| { } |
| }; |
| MODULE_DEVICE_TABLE(i2c, sx9360_id); |
| |
| static struct i2c_driver sx9360_driver = { |
| .driver = { |
| .name = "sx9360", |
| .acpi_match_table = sx9360_acpi_match, |
| .of_match_table = sx9360_of_match, |
| .pm = pm_sleep_ptr(&sx9360_pm_ops), |
| |
| /* |
| * Lots of i2c transfers in probe + over 200 ms waiting in |
| * sx9360_init_compensation() mean a slow probe; prefer async |
| * so we don't delay boot if we're builtin to the kernel. |
| */ |
| .probe_type = PROBE_PREFER_ASYNCHRONOUS, |
| }, |
| .probe = sx9360_probe, |
| .id_table = sx9360_id, |
| }; |
| module_i2c_driver(sx9360_driver); |
| |
| MODULE_AUTHOR("Gwendal Grignou <gwendal@chromium.org>"); |
| MODULE_DESCRIPTION("Driver for Semtech SX9360 proximity sensor"); |
| MODULE_LICENSE("GPL v2"); |
| MODULE_IMPORT_NS(SEMTECH_PROX); |