| // SPDX-License-Identifier: GPL-2.0-only |
| /* |
| * vpmu_counter_access - Test vPMU event counter access |
| * |
| * Copyright (c) 2023 Google LLC. |
| * |
| * This test checks if the guest can see the same number of the PMU event |
| * counters (PMCR_EL0.N) that userspace sets, if the guest can access |
| * those counters, and if the guest is prevented from accessing any |
| * other counters. |
| * It also checks if the userspace accesses to the PMU regsisters honor the |
| * PMCR.N value that's set for the guest. |
| * This test runs only when KVM_CAP_ARM_PMU_V3 is supported on the host. |
| */ |
| #include <kvm_util.h> |
| #include <processor.h> |
| #include <test_util.h> |
| #include <vgic.h> |
| #include <perf/arm_pmuv3.h> |
| #include <linux/bitfield.h> |
| |
| /* The max number of the PMU event counters (excluding the cycle counter) */ |
| #define ARMV8_PMU_MAX_GENERAL_COUNTERS (ARMV8_PMU_MAX_COUNTERS - 1) |
| |
| /* The cycle counter bit position that's common among the PMU registers */ |
| #define ARMV8_PMU_CYCLE_IDX 31 |
| |
| struct vpmu_vm { |
| struct kvm_vm *vm; |
| struct kvm_vcpu *vcpu; |
| int gic_fd; |
| }; |
| |
| static struct vpmu_vm vpmu_vm; |
| |
| struct pmreg_sets { |
| uint64_t set_reg_id; |
| uint64_t clr_reg_id; |
| }; |
| |
| #define PMREG_SET(set, clr) {.set_reg_id = set, .clr_reg_id = clr} |
| |
| static uint64_t get_pmcr_n(uint64_t pmcr) |
| { |
| return FIELD_GET(ARMV8_PMU_PMCR_N, pmcr); |
| } |
| |
| static void set_pmcr_n(uint64_t *pmcr, uint64_t pmcr_n) |
| { |
| u64p_replace_bits((__u64 *) pmcr, pmcr_n, ARMV8_PMU_PMCR_N); |
| } |
| |
| static uint64_t get_counters_mask(uint64_t n) |
| { |
| uint64_t mask = BIT(ARMV8_PMU_CYCLE_IDX); |
| |
| if (n) |
| mask |= GENMASK(n - 1, 0); |
| return mask; |
| } |
| |
| /* Read PMEVTCNTR<n>_EL0 through PMXEVCNTR_EL0 */ |
| static inline unsigned long read_sel_evcntr(int sel) |
| { |
| write_sysreg(sel, pmselr_el0); |
| isb(); |
| return read_sysreg(pmxevcntr_el0); |
| } |
| |
| /* Write PMEVTCNTR<n>_EL0 through PMXEVCNTR_EL0 */ |
| static inline void write_sel_evcntr(int sel, unsigned long val) |
| { |
| write_sysreg(sel, pmselr_el0); |
| isb(); |
| write_sysreg(val, pmxevcntr_el0); |
| isb(); |
| } |
| |
| /* Read PMEVTYPER<n>_EL0 through PMXEVTYPER_EL0 */ |
| static inline unsigned long read_sel_evtyper(int sel) |
| { |
| write_sysreg(sel, pmselr_el0); |
| isb(); |
| return read_sysreg(pmxevtyper_el0); |
| } |
| |
| /* Write PMEVTYPER<n>_EL0 through PMXEVTYPER_EL0 */ |
| static inline void write_sel_evtyper(int sel, unsigned long val) |
| { |
| write_sysreg(sel, pmselr_el0); |
| isb(); |
| write_sysreg(val, pmxevtyper_el0); |
| isb(); |
| } |
| |
| static void pmu_disable_reset(void) |
| { |
| uint64_t pmcr = read_sysreg(pmcr_el0); |
| |
| /* Reset all counters, disabling them */ |
| pmcr &= ~ARMV8_PMU_PMCR_E; |
| write_sysreg(pmcr | ARMV8_PMU_PMCR_P, pmcr_el0); |
| isb(); |
| } |
| |
| #define RETURN_READ_PMEVCNTRN(n) \ |
| return read_sysreg(pmevcntr##n##_el0) |
| static unsigned long read_pmevcntrn(int n) |
| { |
| PMEVN_SWITCH(n, RETURN_READ_PMEVCNTRN); |
| return 0; |
| } |
| |
| #define WRITE_PMEVCNTRN(n) \ |
| write_sysreg(val, pmevcntr##n##_el0) |
| static void write_pmevcntrn(int n, unsigned long val) |
| { |
| PMEVN_SWITCH(n, WRITE_PMEVCNTRN); |
| isb(); |
| } |
| |
| #define READ_PMEVTYPERN(n) \ |
| return read_sysreg(pmevtyper##n##_el0) |
| static unsigned long read_pmevtypern(int n) |
| { |
| PMEVN_SWITCH(n, READ_PMEVTYPERN); |
| return 0; |
| } |
| |
| #define WRITE_PMEVTYPERN(n) \ |
| write_sysreg(val, pmevtyper##n##_el0) |
| static void write_pmevtypern(int n, unsigned long val) |
| { |
| PMEVN_SWITCH(n, WRITE_PMEVTYPERN); |
| isb(); |
| } |
| |
| /* |
| * The pmc_accessor structure has pointers to PMEV{CNTR,TYPER}<n>_EL0 |
| * accessors that test cases will use. Each of the accessors will |
| * either directly reads/writes PMEV{CNTR,TYPER}<n>_EL0 |
| * (i.e. {read,write}_pmev{cnt,type}rn()), or reads/writes them through |
| * PMXEV{CNTR,TYPER}_EL0 (i.e. {read,write}_sel_ev{cnt,type}r()). |
| * |
| * This is used to test that combinations of those accessors provide |
| * the consistent behavior. |
| */ |
| struct pmc_accessor { |
| /* A function to be used to read PMEVTCNTR<n>_EL0 */ |
| unsigned long (*read_cntr)(int idx); |
| /* A function to be used to write PMEVTCNTR<n>_EL0 */ |
| void (*write_cntr)(int idx, unsigned long val); |
| /* A function to be used to read PMEVTYPER<n>_EL0 */ |
| unsigned long (*read_typer)(int idx); |
| /* A function to be used to write PMEVTYPER<n>_EL0 */ |
| void (*write_typer)(int idx, unsigned long val); |
| }; |
| |
| struct pmc_accessor pmc_accessors[] = { |
| /* test with all direct accesses */ |
| { read_pmevcntrn, write_pmevcntrn, read_pmevtypern, write_pmevtypern }, |
| /* test with all indirect accesses */ |
| { read_sel_evcntr, write_sel_evcntr, read_sel_evtyper, write_sel_evtyper }, |
| /* read with direct accesses, and write with indirect accesses */ |
| { read_pmevcntrn, write_sel_evcntr, read_pmevtypern, write_sel_evtyper }, |
| /* read with indirect accesses, and write with direct accesses */ |
| { read_sel_evcntr, write_pmevcntrn, read_sel_evtyper, write_pmevtypern }, |
| }; |
| |
| /* |
| * Convert a pointer of pmc_accessor to an index in pmc_accessors[], |
| * assuming that the pointer is one of the entries in pmc_accessors[]. |
| */ |
| #define PMC_ACC_TO_IDX(acc) (acc - &pmc_accessors[0]) |
| |
| #define GUEST_ASSERT_BITMAP_REG(regname, mask, set_expected) \ |
| { \ |
| uint64_t _tval = read_sysreg(regname); \ |
| \ |
| if (set_expected) \ |
| __GUEST_ASSERT((_tval & mask), \ |
| "tval: 0x%lx; mask: 0x%lx; set_expected: %u", \ |
| _tval, mask, set_expected); \ |
| else \ |
| __GUEST_ASSERT(!(_tval & mask), \ |
| "tval: 0x%lx; mask: 0x%lx; set_expected: %u", \ |
| _tval, mask, set_expected); \ |
| } |
| |
| /* |
| * Check if @mask bits in {PMCNTEN,PMINTEN,PMOVS}{SET,CLR} registers |
| * are set or cleared as specified in @set_expected. |
| */ |
| static void check_bitmap_pmu_regs(uint64_t mask, bool set_expected) |
| { |
| GUEST_ASSERT_BITMAP_REG(pmcntenset_el0, mask, set_expected); |
| GUEST_ASSERT_BITMAP_REG(pmcntenclr_el0, mask, set_expected); |
| GUEST_ASSERT_BITMAP_REG(pmintenset_el1, mask, set_expected); |
| GUEST_ASSERT_BITMAP_REG(pmintenclr_el1, mask, set_expected); |
| GUEST_ASSERT_BITMAP_REG(pmovsset_el0, mask, set_expected); |
| GUEST_ASSERT_BITMAP_REG(pmovsclr_el0, mask, set_expected); |
| } |
| |
| /* |
| * Check if the bit in {PMCNTEN,PMINTEN,PMOVS}{SET,CLR} registers corresponding |
| * to the specified counter (@pmc_idx) can be read/written as expected. |
| * When @set_op is true, it tries to set the bit for the counter in |
| * those registers by writing the SET registers (the bit won't be set |
| * if the counter is not implemented though). |
| * Otherwise, it tries to clear the bits in the registers by writing |
| * the CLR registers. |
| * Then, it checks if the values indicated in the registers are as expected. |
| */ |
| static void test_bitmap_pmu_regs(int pmc_idx, bool set_op) |
| { |
| uint64_t pmcr_n, test_bit = BIT(pmc_idx); |
| bool set_expected = false; |
| |
| if (set_op) { |
| write_sysreg(test_bit, pmcntenset_el0); |
| write_sysreg(test_bit, pmintenset_el1); |
| write_sysreg(test_bit, pmovsset_el0); |
| |
| /* The bit will be set only if the counter is implemented */ |
| pmcr_n = get_pmcr_n(read_sysreg(pmcr_el0)); |
| set_expected = (pmc_idx < pmcr_n) ? true : false; |
| } else { |
| write_sysreg(test_bit, pmcntenclr_el0); |
| write_sysreg(test_bit, pmintenclr_el1); |
| write_sysreg(test_bit, pmovsclr_el0); |
| } |
| check_bitmap_pmu_regs(test_bit, set_expected); |
| } |
| |
| /* |
| * Tests for reading/writing registers for the (implemented) event counter |
| * specified by @pmc_idx. |
| */ |
| static void test_access_pmc_regs(struct pmc_accessor *acc, int pmc_idx) |
| { |
| uint64_t write_data, read_data; |
| |
| /* Disable all PMCs and reset all PMCs to zero. */ |
| pmu_disable_reset(); |
| |
| /* |
| * Tests for reading/writing {PMCNTEN,PMINTEN,PMOVS}{SET,CLR}_EL1. |
| */ |
| |
| /* Make sure that the bit in those registers are set to 0 */ |
| test_bitmap_pmu_regs(pmc_idx, false); |
| /* Test if setting the bit in those registers works */ |
| test_bitmap_pmu_regs(pmc_idx, true); |
| /* Test if clearing the bit in those registers works */ |
| test_bitmap_pmu_regs(pmc_idx, false); |
| |
| /* |
| * Tests for reading/writing the event type register. |
| */ |
| |
| /* |
| * Set the event type register to an arbitrary value just for testing |
| * of reading/writing the register. |
| * Arm ARM says that for the event from 0x0000 to 0x003F, |
| * the value indicated in the PMEVTYPER<n>_EL0.evtCount field is |
| * the value written to the field even when the specified event |
| * is not supported. |
| */ |
| write_data = (ARMV8_PMU_EXCLUDE_EL1 | ARMV8_PMUV3_PERFCTR_INST_RETIRED); |
| acc->write_typer(pmc_idx, write_data); |
| read_data = acc->read_typer(pmc_idx); |
| __GUEST_ASSERT(read_data == write_data, |
| "pmc_idx: 0x%x; acc_idx: 0x%lx; read_data: 0x%lx; write_data: 0x%lx", |
| pmc_idx, PMC_ACC_TO_IDX(acc), read_data, write_data); |
| |
| /* |
| * Tests for reading/writing the event count register. |
| */ |
| |
| read_data = acc->read_cntr(pmc_idx); |
| |
| /* The count value must be 0, as it is disabled and reset */ |
| __GUEST_ASSERT(read_data == 0, |
| "pmc_idx: 0x%x; acc_idx: 0x%lx; read_data: 0x%lx", |
| pmc_idx, PMC_ACC_TO_IDX(acc), read_data); |
| |
| write_data = read_data + pmc_idx + 0x12345; |
| acc->write_cntr(pmc_idx, write_data); |
| read_data = acc->read_cntr(pmc_idx); |
| __GUEST_ASSERT(read_data == write_data, |
| "pmc_idx: 0x%x; acc_idx: 0x%lx; read_data: 0x%lx; write_data: 0x%lx", |
| pmc_idx, PMC_ACC_TO_IDX(acc), read_data, write_data); |
| } |
| |
| #define INVALID_EC (-1ul) |
| uint64_t expected_ec = INVALID_EC; |
| |
| static void guest_sync_handler(struct ex_regs *regs) |
| { |
| uint64_t esr, ec; |
| |
| esr = read_sysreg(esr_el1); |
| ec = (esr >> ESR_EC_SHIFT) & ESR_EC_MASK; |
| |
| __GUEST_ASSERT(expected_ec == ec, |
| "PC: 0x%lx; ESR: 0x%lx; EC: 0x%lx; EC expected: 0x%lx", |
| regs->pc, esr, ec, expected_ec); |
| |
| /* skip the trapping instruction */ |
| regs->pc += 4; |
| |
| /* Use INVALID_EC to indicate an exception occurred */ |
| expected_ec = INVALID_EC; |
| } |
| |
| /* |
| * Run the given operation that should trigger an exception with the |
| * given exception class. The exception handler (guest_sync_handler) |
| * will reset op_end_addr to 0, expected_ec to INVALID_EC, and skip |
| * the instruction that trapped. |
| */ |
| #define TEST_EXCEPTION(ec, ops) \ |
| ({ \ |
| GUEST_ASSERT(ec != INVALID_EC); \ |
| WRITE_ONCE(expected_ec, ec); \ |
| dsb(ish); \ |
| ops; \ |
| GUEST_ASSERT(expected_ec == INVALID_EC); \ |
| }) |
| |
| /* |
| * Tests for reading/writing registers for the unimplemented event counter |
| * specified by @pmc_idx (>= PMCR_EL0.N). |
| */ |
| static void test_access_invalid_pmc_regs(struct pmc_accessor *acc, int pmc_idx) |
| { |
| /* |
| * Reading/writing the event count/type registers should cause |
| * an UNDEFINED exception. |
| */ |
| TEST_EXCEPTION(ESR_EC_UNKNOWN, acc->read_cntr(pmc_idx)); |
| TEST_EXCEPTION(ESR_EC_UNKNOWN, acc->write_cntr(pmc_idx, 0)); |
| TEST_EXCEPTION(ESR_EC_UNKNOWN, acc->read_typer(pmc_idx)); |
| TEST_EXCEPTION(ESR_EC_UNKNOWN, acc->write_typer(pmc_idx, 0)); |
| /* |
| * The bit corresponding to the (unimplemented) counter in |
| * {PMCNTEN,PMINTEN,PMOVS}{SET,CLR} registers should be RAZ. |
| */ |
| test_bitmap_pmu_regs(pmc_idx, 1); |
| test_bitmap_pmu_regs(pmc_idx, 0); |
| } |
| |
| /* |
| * The guest is configured with PMUv3 with @expected_pmcr_n number of |
| * event counters. |
| * Check if @expected_pmcr_n is consistent with PMCR_EL0.N, and |
| * if reading/writing PMU registers for implemented or unimplemented |
| * counters works as expected. |
| */ |
| static void guest_code(uint64_t expected_pmcr_n) |
| { |
| uint64_t pmcr, pmcr_n, unimp_mask; |
| int i, pmc; |
| |
| __GUEST_ASSERT(expected_pmcr_n <= ARMV8_PMU_MAX_GENERAL_COUNTERS, |
| "Expected PMCR.N: 0x%lx; ARMv8 general counters: 0x%x", |
| expected_pmcr_n, ARMV8_PMU_MAX_GENERAL_COUNTERS); |
| |
| pmcr = read_sysreg(pmcr_el0); |
| pmcr_n = get_pmcr_n(pmcr); |
| |
| /* Make sure that PMCR_EL0.N indicates the value userspace set */ |
| __GUEST_ASSERT(pmcr_n == expected_pmcr_n, |
| "Expected PMCR.N: 0x%lx, PMCR.N: 0x%lx", |
| expected_pmcr_n, pmcr_n); |
| |
| /* |
| * Make sure that (RAZ) bits corresponding to unimplemented event |
| * counters in {PMCNTEN,PMINTEN,PMOVS}{SET,CLR} registers are reset |
| * to zero. |
| * (NOTE: bits for implemented event counters are reset to UNKNOWN) |
| */ |
| unimp_mask = GENMASK_ULL(ARMV8_PMU_MAX_GENERAL_COUNTERS - 1, pmcr_n); |
| check_bitmap_pmu_regs(unimp_mask, false); |
| |
| /* |
| * Tests for reading/writing PMU registers for implemented counters. |
| * Use each combination of PMEV{CNTR,TYPER}<n>_EL0 accessor functions. |
| */ |
| for (i = 0; i < ARRAY_SIZE(pmc_accessors); i++) { |
| for (pmc = 0; pmc < pmcr_n; pmc++) |
| test_access_pmc_regs(&pmc_accessors[i], pmc); |
| } |
| |
| /* |
| * Tests for reading/writing PMU registers for unimplemented counters. |
| * Use each combination of PMEV{CNTR,TYPER}<n>_EL0 accessor functions. |
| */ |
| for (i = 0; i < ARRAY_SIZE(pmc_accessors); i++) { |
| for (pmc = pmcr_n; pmc < ARMV8_PMU_MAX_GENERAL_COUNTERS; pmc++) |
| test_access_invalid_pmc_regs(&pmc_accessors[i], pmc); |
| } |
| |
| GUEST_DONE(); |
| } |
| |
| #define GICD_BASE_GPA 0x8000000ULL |
| #define GICR_BASE_GPA 0x80A0000ULL |
| |
| /* Create a VM that has one vCPU with PMUv3 configured. */ |
| static void create_vpmu_vm(void *guest_code) |
| { |
| struct kvm_vcpu_init init; |
| uint8_t pmuver, ec; |
| uint64_t dfr0, irq = 23; |
| struct kvm_device_attr irq_attr = { |
| .group = KVM_ARM_VCPU_PMU_V3_CTRL, |
| .attr = KVM_ARM_VCPU_PMU_V3_IRQ, |
| .addr = (uint64_t)&irq, |
| }; |
| struct kvm_device_attr init_attr = { |
| .group = KVM_ARM_VCPU_PMU_V3_CTRL, |
| .attr = KVM_ARM_VCPU_PMU_V3_INIT, |
| }; |
| |
| /* The test creates the vpmu_vm multiple times. Ensure a clean state */ |
| memset(&vpmu_vm, 0, sizeof(vpmu_vm)); |
| |
| vpmu_vm.vm = vm_create(1); |
| vm_init_descriptor_tables(vpmu_vm.vm); |
| for (ec = 0; ec < ESR_EC_NUM; ec++) { |
| vm_install_sync_handler(vpmu_vm.vm, VECTOR_SYNC_CURRENT, ec, |
| guest_sync_handler); |
| } |
| |
| /* Create vCPU with PMUv3 */ |
| vm_ioctl(vpmu_vm.vm, KVM_ARM_PREFERRED_TARGET, &init); |
| init.features[0] |= (1 << KVM_ARM_VCPU_PMU_V3); |
| vpmu_vm.vcpu = aarch64_vcpu_add(vpmu_vm.vm, 0, &init, guest_code); |
| vcpu_init_descriptor_tables(vpmu_vm.vcpu); |
| vpmu_vm.gic_fd = vgic_v3_setup(vpmu_vm.vm, 1, 64, |
| GICD_BASE_GPA, GICR_BASE_GPA); |
| __TEST_REQUIRE(vpmu_vm.gic_fd >= 0, |
| "Failed to create vgic-v3, skipping"); |
| |
| /* Make sure that PMUv3 support is indicated in the ID register */ |
| vcpu_get_reg(vpmu_vm.vcpu, |
| KVM_ARM64_SYS_REG(SYS_ID_AA64DFR0_EL1), &dfr0); |
| pmuver = FIELD_GET(ARM64_FEATURE_MASK(ID_AA64DFR0_EL1_PMUVer), dfr0); |
| TEST_ASSERT(pmuver != ID_AA64DFR0_EL1_PMUVer_IMP_DEF && |
| pmuver >= ID_AA64DFR0_EL1_PMUVer_IMP, |
| "Unexpected PMUVER (0x%x) on the vCPU with PMUv3", pmuver); |
| |
| /* Initialize vPMU */ |
| vcpu_ioctl(vpmu_vm.vcpu, KVM_SET_DEVICE_ATTR, &irq_attr); |
| vcpu_ioctl(vpmu_vm.vcpu, KVM_SET_DEVICE_ATTR, &init_attr); |
| } |
| |
| static void destroy_vpmu_vm(void) |
| { |
| close(vpmu_vm.gic_fd); |
| kvm_vm_free(vpmu_vm.vm); |
| } |
| |
| static void run_vcpu(struct kvm_vcpu *vcpu, uint64_t pmcr_n) |
| { |
| struct ucall uc; |
| |
| vcpu_args_set(vcpu, 1, pmcr_n); |
| vcpu_run(vcpu); |
| switch (get_ucall(vcpu, &uc)) { |
| case UCALL_ABORT: |
| REPORT_GUEST_ASSERT(uc); |
| break; |
| case UCALL_DONE: |
| break; |
| default: |
| TEST_FAIL("Unknown ucall %lu", uc.cmd); |
| break; |
| } |
| } |
| |
| static void test_create_vpmu_vm_with_pmcr_n(uint64_t pmcr_n, bool expect_fail) |
| { |
| struct kvm_vcpu *vcpu; |
| uint64_t pmcr, pmcr_orig; |
| |
| create_vpmu_vm(guest_code); |
| vcpu = vpmu_vm.vcpu; |
| |
| vcpu_get_reg(vcpu, KVM_ARM64_SYS_REG(SYS_PMCR_EL0), &pmcr_orig); |
| pmcr = pmcr_orig; |
| |
| /* |
| * Setting a larger value of PMCR.N should not modify the field, and |
| * return a success. |
| */ |
| set_pmcr_n(&pmcr, pmcr_n); |
| vcpu_set_reg(vcpu, KVM_ARM64_SYS_REG(SYS_PMCR_EL0), pmcr); |
| vcpu_get_reg(vcpu, KVM_ARM64_SYS_REG(SYS_PMCR_EL0), &pmcr); |
| |
| if (expect_fail) |
| TEST_ASSERT(pmcr_orig == pmcr, |
| "PMCR.N modified by KVM to a larger value (PMCR: 0x%lx) for pmcr_n: 0x%lx", |
| pmcr, pmcr_n); |
| else |
| TEST_ASSERT(pmcr_n == get_pmcr_n(pmcr), |
| "Failed to update PMCR.N to %lu (received: %lu)", |
| pmcr_n, get_pmcr_n(pmcr)); |
| } |
| |
| /* |
| * Create a guest with one vCPU, set the PMCR_EL0.N for the vCPU to @pmcr_n, |
| * and run the test. |
| */ |
| static void run_access_test(uint64_t pmcr_n) |
| { |
| uint64_t sp; |
| struct kvm_vcpu *vcpu; |
| struct kvm_vcpu_init init; |
| |
| pr_debug("Test with pmcr_n %lu\n", pmcr_n); |
| |
| test_create_vpmu_vm_with_pmcr_n(pmcr_n, false); |
| vcpu = vpmu_vm.vcpu; |
| |
| /* Save the initial sp to restore them later to run the guest again */ |
| vcpu_get_reg(vcpu, ARM64_CORE_REG(sp_el1), &sp); |
| |
| run_vcpu(vcpu, pmcr_n); |
| |
| /* |
| * Reset and re-initialize the vCPU, and run the guest code again to |
| * check if PMCR_EL0.N is preserved. |
| */ |
| vm_ioctl(vpmu_vm.vm, KVM_ARM_PREFERRED_TARGET, &init); |
| init.features[0] |= (1 << KVM_ARM_VCPU_PMU_V3); |
| aarch64_vcpu_setup(vcpu, &init); |
| vcpu_init_descriptor_tables(vcpu); |
| vcpu_set_reg(vcpu, ARM64_CORE_REG(sp_el1), sp); |
| vcpu_set_reg(vcpu, ARM64_CORE_REG(regs.pc), (uint64_t)guest_code); |
| |
| run_vcpu(vcpu, pmcr_n); |
| |
| destroy_vpmu_vm(); |
| } |
| |
| static struct pmreg_sets validity_check_reg_sets[] = { |
| PMREG_SET(SYS_PMCNTENSET_EL0, SYS_PMCNTENCLR_EL0), |
| PMREG_SET(SYS_PMINTENSET_EL1, SYS_PMINTENCLR_EL1), |
| PMREG_SET(SYS_PMOVSSET_EL0, SYS_PMOVSCLR_EL0), |
| }; |
| |
| /* |
| * Create a VM, and check if KVM handles the userspace accesses of |
| * the PMU register sets in @validity_check_reg_sets[] correctly. |
| */ |
| static void run_pmregs_validity_test(uint64_t pmcr_n) |
| { |
| int i; |
| struct kvm_vcpu *vcpu; |
| uint64_t set_reg_id, clr_reg_id, reg_val; |
| uint64_t valid_counters_mask, max_counters_mask; |
| |
| test_create_vpmu_vm_with_pmcr_n(pmcr_n, false); |
| vcpu = vpmu_vm.vcpu; |
| |
| valid_counters_mask = get_counters_mask(pmcr_n); |
| max_counters_mask = get_counters_mask(ARMV8_PMU_MAX_COUNTERS); |
| |
| for (i = 0; i < ARRAY_SIZE(validity_check_reg_sets); i++) { |
| set_reg_id = validity_check_reg_sets[i].set_reg_id; |
| clr_reg_id = validity_check_reg_sets[i].clr_reg_id; |
| |
| /* |
| * Test if the 'set' and 'clr' variants of the registers |
| * are initialized based on the number of valid counters. |
| */ |
| vcpu_get_reg(vcpu, KVM_ARM64_SYS_REG(set_reg_id), ®_val); |
| TEST_ASSERT((reg_val & (~valid_counters_mask)) == 0, |
| "Initial read of set_reg: 0x%llx has unimplemented counters enabled: 0x%lx", |
| KVM_ARM64_SYS_REG(set_reg_id), reg_val); |
| |
| vcpu_get_reg(vcpu, KVM_ARM64_SYS_REG(clr_reg_id), ®_val); |
| TEST_ASSERT((reg_val & (~valid_counters_mask)) == 0, |
| "Initial read of clr_reg: 0x%llx has unimplemented counters enabled: 0x%lx", |
| KVM_ARM64_SYS_REG(clr_reg_id), reg_val); |
| |
| /* |
| * Using the 'set' variant, force-set the register to the |
| * max number of possible counters and test if KVM discards |
| * the bits for unimplemented counters as it should. |
| */ |
| vcpu_set_reg(vcpu, KVM_ARM64_SYS_REG(set_reg_id), max_counters_mask); |
| |
| vcpu_get_reg(vcpu, KVM_ARM64_SYS_REG(set_reg_id), ®_val); |
| TEST_ASSERT((reg_val & (~valid_counters_mask)) == 0, |
| "Read of set_reg: 0x%llx has unimplemented counters enabled: 0x%lx", |
| KVM_ARM64_SYS_REG(set_reg_id), reg_val); |
| |
| vcpu_get_reg(vcpu, KVM_ARM64_SYS_REG(clr_reg_id), ®_val); |
| TEST_ASSERT((reg_val & (~valid_counters_mask)) == 0, |
| "Read of clr_reg: 0x%llx has unimplemented counters enabled: 0x%lx", |
| KVM_ARM64_SYS_REG(clr_reg_id), reg_val); |
| } |
| |
| destroy_vpmu_vm(); |
| } |
| |
| /* |
| * Create a guest with one vCPU, and attempt to set the PMCR_EL0.N for |
| * the vCPU to @pmcr_n, which is larger than the host value. |
| * The attempt should fail as @pmcr_n is too big to set for the vCPU. |
| */ |
| static void run_error_test(uint64_t pmcr_n) |
| { |
| pr_debug("Error test with pmcr_n %lu (larger than the host)\n", pmcr_n); |
| |
| test_create_vpmu_vm_with_pmcr_n(pmcr_n, true); |
| destroy_vpmu_vm(); |
| } |
| |
| /* |
| * Return the default number of implemented PMU event counters excluding |
| * the cycle counter (i.e. PMCR_EL0.N value) for the guest. |
| */ |
| static uint64_t get_pmcr_n_limit(void) |
| { |
| uint64_t pmcr; |
| |
| create_vpmu_vm(guest_code); |
| vcpu_get_reg(vpmu_vm.vcpu, KVM_ARM64_SYS_REG(SYS_PMCR_EL0), &pmcr); |
| destroy_vpmu_vm(); |
| return get_pmcr_n(pmcr); |
| } |
| |
| int main(void) |
| { |
| uint64_t i, pmcr_n; |
| |
| TEST_REQUIRE(kvm_has_cap(KVM_CAP_ARM_PMU_V3)); |
| |
| pmcr_n = get_pmcr_n_limit(); |
| for (i = 0; i <= pmcr_n; i++) { |
| run_access_test(i); |
| run_pmregs_validity_test(i); |
| } |
| |
| for (i = pmcr_n + 1; i < ARMV8_PMU_MAX_COUNTERS; i++) |
| run_error_test(i); |
| |
| return 0; |
| } |