arch/arm/boot/dts/ti/omap/am335x-baltos-ir2110.dts

// SPDX-License-Identifier: GPL-2.0-only
/*
 * Copyright (C) 2012 Texas Instruments Incorporated - https://www.ti.com/
 */

/*
 * VScom OnRISC
 * https://www.vscom.de
 */

/dts-v1/;

#include "am335x-baltos.dtsi"
#include "am335x-baltos-leds.dtsi"

/ {
	model = "OnRISC Baltos iR 2110";
};

&am33xx_pinmux {
	uart1_pins: uart1-pins {
		pinctrl-single,pins = <
			AM33XX_PADCONF(AM335X_PIN_UART1_RXD, PIN_INPUT, MUX_MODE0)
			AM33XX_PADCONF(AM335X_PIN_UART1_TXD, PIN_INPUT, MUX_MODE0)
			AM33XX_PADCONF(AM335X_PIN_UART1_CTSN, PIN_INPUT_PULLDOWN, MUX_MODE0)
			AM33XX_PADCONF(AM335X_PIN_UART1_RTSN, PIN_OUTPUT_PULLDOWN, MUX_MODE0)
			AM33XX_PADCONF(AM335X_PIN_LCD_VSYNC, PIN_OUTPUT_PULLDOWN, MUX_MODE7)      /* lcd_vsync.gpio2[22] DTR */
			AM33XX_PADCONF(AM335X_PIN_LCD_HSYNC, PIN_INPUT_PULLDOWN, MUX_MODE7)      /* lcd_hsync.gpio2[23] DSR */
			AM33XX_PADCONF(AM335X_PIN_LCD_PCLK, PIN_INPUT_PULLDOWN, MUX_MODE7)      /* lcd_pclk.gpio2[24] DCD */
			AM33XX_PADCONF(AM335X_PIN_LCD_AC_BIAS_EN, PIN_INPUT_PULLDOWN, MUX_MODE7)      /* lcd_ac_bias_en.gpio2[25] RI */
		>;
	};

	mmc1_pins: mmc1-pins {
		pinctrl-single,pins = <
			AM33XX_PADCONF(AM335X_PIN_GPMC_AD15, PIN_INPUT, MUX_MODE7)     /* MMC1 CD */
		>;
	};
};

&uart1 {
	pinctrl-names = "default";
	pinctrl-0 = <&uart1_pins>;
	dtr-gpios = <&gpio2 22 GPIO_ACTIVE_LOW>;
	dsr-gpios = <&gpio2 23 GPIO_ACTIVE_LOW>;
	dcd-gpios = <&gpio2 24 GPIO_ACTIVE_LOW>;
	rng-gpios = <&gpio2 25 GPIO_ACTIVE_LOW>;

	status = "okay";
};

&usb0_phy {
	status = "okay";
};

&usb0 {
	status = "okay";
	dr_mode = "host";
};

&davinci_mdio_sw {
	phy0: ethernet-phy@0 {
		reg = <1>;
	};
};

&cpsw_port1 {
	phy-mode = "rmii";
	ti,dual-emac-pvid = <1>;
	phy-handle = <&phy0>;
};

&cpsw_port2 {
	phy-mode = "rgmii-id";
	ti,dual-emac-pvid = <2>;
	phy-handle = <&phy1>;
};

&mmc1 {
	pinctrl-names = "default";
	pinctrl-0 = <&mmc1_pins>;
	cd-gpios = <&gpio1 15 GPIO_ACTIVE_LOW>;
};

&gpio0 {
	gpio-line-names =
		"MDIO",
		"MDC",
		"NC",
		"NC",
		"I2C1_SDA",
		"I2C1_SCL",
		"NC",
		"NC",
		"NC",
		"NC",
		"NC",
		"NC",
		"UART1_CTSN",
		"UART1_RTSN",
		"UART1_RX",
		"UART1_TX",
		"onrisc:blue:wlan",
		"onrisc:green:app",
		"USB0_DRVVBUS",
		"ETH2_INT",
		"NC",
		"RMII1_TXD1",
		"MMC1_DAT0",
		"MMC1_DAT1",
		"NC",
		"NC",
		"MMC1_DAT2",
		"MMC1_DAT3",
		"RMII1_TXD0",
		"NC",
		"GPMC_WAIT0",
		"GPMC_WP_N";
};

&gpio1 {
	gpio-line-names =
		"GPMC_AD0",
		"GPMC_AD1",
		"GPMC_AD2",
		"GPMC_AD3",
		"GPMC_AD4",
		"GPMC_AD5",
		"GPMC_AD6",
		"GPMC_AD7",
		"NC",
		"NC",
		"CONSOLE_RX",
		"CONSOLE_TX",
		"NC",
		"NC",
		"NC",
		"SD_CD",
		"RGMII2_TCTL",
		"RGMII2_RCTL",
		"RGMII2_TD3",
		"RGMII2_TD2",
		"RGMII2_TD1",
		"RGMII2_TD0",
		"RGMII2_TCLK",
		"RGMII2_RCLK",
		"RGMII2_RD3",
		"RGMII2_RD2",
		"RGMII2_RD1",
		"RGMII2_RD0",
		"PMIC_INT1",
		"GPMC_CSN0_Flash",
		"MMC1_CLK",
		"MMC1_CMD";
};

&gpio2 {
	gpio-line-names =
		"GPMC_CSN3_BUS",
		"GPMC_CLK",
		"GPMC_ADVN_ALE",
		"GPMC_OEN_RE_N",
		"GPMC_WE_N",
		"GPMC_BEN0_CLE",
		"NC",
		"NC",
		"NC",
		"NC",
		"NC",
		"NC",
		"NC",
		"NC",
		"NC",
		"NC",
		"NC",
		"NC",
		"SW2_0",
		"SW2_1",
		"RMII1_RXD1",
		"RMII1_RXD0",
		"UART1_DTR",
		"UART1_DSR",
		"UART1_DCD",
		"UART1_RI",
		"MMC0_DAT3",
		"MMC0_DAT2",
		"MMC0_DAT1",
		"MMC0_DAT0",
		"MMC0_CLK",
		"MMC0_CMD";
};

&gpio3 {
	gpio-line-names =
		"onrisc:red:power",
		"RMII1_CRS_DV",
		"RMII1_RXER",
		"RMII1_TXEN",
		"NC",
		"NC",
		"NC",
		"WLAN_IRQ",
		"WLAN_EN",
		"SW2_2",
		"SW2_3",
		"NC",
		"NC",
		"NC",
		"ModeA0",
		"ModeA1",
		"ModeA2",
		"ModeA3",
		"NC",
		"NC",
		"NC",
		"NC",
		"NC",
		"NC",
		"NC",
		"NC",
		"NC",
		"NC",
		"NC",
		"NC",
		"NC",
		"NC";
};