| // SPDX-License-Identifier: GPL-2.0-only |
| /* |
| * Copyright (C) 2012 Texas Instruments Incorporated - https://www.ti.com/ |
| */ |
| /dts-v1/; |
| |
| #include "am33xx.dtsi" |
| #include "am335x-osd335x-common.dtsi" |
| #include <dt-bindings/interrupt-controller/irq.h> |
| |
| / { |
| model = "TI AM335x BeagleBone Blue"; |
| compatible = "ti,am335x-bone-blue", "ti,am33xx"; |
| |
| chosen { |
| stdout-path = &uart0; |
| }; |
| |
| leds { |
| pinctrl-names = "default"; |
| pinctrl-0 = <&user_leds_s0>; |
| |
| compatible = "gpio-leds"; |
| |
| usr_0_led { |
| label = "beaglebone:green:usr0"; |
| gpios = <&gpio1 21 GPIO_ACTIVE_HIGH>; |
| linux,default-trigger = "heartbeat"; |
| default-state = "off"; |
| }; |
| |
| usr_1_led { |
| label = "beaglebone:green:usr1"; |
| gpios = <&gpio1 22 GPIO_ACTIVE_HIGH>; |
| linux,default-trigger = "mmc0"; |
| default-state = "off"; |
| }; |
| |
| usr_2_led { |
| label = "beaglebone:green:usr2"; |
| gpios = <&gpio1 23 GPIO_ACTIVE_HIGH>; |
| linux,default-trigger = "cpu0"; |
| default-state = "off"; |
| }; |
| |
| usr_3_led { |
| label = "beaglebone:green:usr3"; |
| gpios = <&gpio1 24 GPIO_ACTIVE_HIGH>; |
| linux,default-trigger = "mmc1"; |
| default-state = "off"; |
| }; |
| |
| wifi_led { |
| label = "wifi"; |
| gpios = <&gpio0 19 GPIO_ACTIVE_HIGH>; |
| default-state = "off"; |
| linux,default-trigger = "phy0assoc"; |
| }; |
| |
| red_led { |
| label = "red"; |
| gpios = <&gpio2 2 GPIO_ACTIVE_HIGH>; |
| default-state = "off"; |
| }; |
| |
| green_led { |
| label = "green"; |
| gpios = <&gpio2 3 GPIO_ACTIVE_HIGH>; |
| default-state = "off"; |
| }; |
| |
| batt_1_led { |
| label = "bat25"; |
| gpios = <&gpio0 27 GPIO_ACTIVE_HIGH>; |
| default-state = "off"; |
| }; |
| |
| batt_2_led { |
| label = "bat50"; |
| gpios = <&gpio0 11 GPIO_ACTIVE_HIGH>; |
| default-state = "off"; |
| }; |
| |
| batt_3_led { |
| label = "bat75"; |
| gpios = <&gpio1 29 GPIO_ACTIVE_HIGH>; |
| default-state = "off"; |
| }; |
| |
| batt_4_led { |
| label = "bat100"; |
| gpios = <&gpio0 26 GPIO_ACTIVE_HIGH>; |
| default-state = "off"; |
| }; |
| }; |
| |
| vmmcsd_fixed: fixedregulator0 { |
| compatible = "regulator-fixed"; |
| regulator-name = "vmmcsd_fixed"; |
| regulator-min-microvolt = <3300000>; |
| regulator-max-microvolt = <3300000>; |
| }; |
| |
| wlan_en_reg: fixedregulator@2 { |
| compatible = "regulator-fixed"; |
| regulator-name = "wlan-en-regulator"; |
| regulator-min-microvolt = <1800000>; |
| regulator-max-microvolt = <1800000>; |
| startup-delay-us = <70000>; |
| |
| /* WL_EN */ |
| gpio = <&gpio3 9 0>; |
| enable-active-high; |
| }; |
| }; |
| |
| &am33xx_pinmux { |
| user_leds_s0: user-leds-s0-pins { |
| pinctrl-single,pins = < |
| AM33XX_PADCONF(AM335X_PIN_GPMC_A5, PIN_OUTPUT, MUX_MODE7) /* (V15) gpmc_a5.gpio1[21] - USR_LED_0 */ |
| AM33XX_PADCONF(AM335X_PIN_GPMC_A6, PIN_OUTPUT, MUX_MODE7) /* (U15) gpmc_a6.gpio1[22] - USR_LED_1 */ |
| AM33XX_PADCONF(AM335X_PIN_GPMC_A7, PIN_OUTPUT, MUX_MODE7) /* (T15) gpmc_a7.gpio1[23] - USR_LED_2 */ |
| AM33XX_PADCONF(AM335X_PIN_GPMC_A8, PIN_OUTPUT, MUX_MODE7) /* (V16) gpmc_a8.gpio1[24] - USR_LED_3 */ |
| AM33XX_PADCONF(AM335X_PIN_XDMA_EVENT_INTR0, PIN_OUTPUT, MUX_MODE7) /* (A15) xdma_event_intr0.gpio0[19] - WIFI_LED */ |
| AM33XX_PADCONF(AM335X_PIN_GPMC_ADVN_ALE, PIN_OUTPUT, MUX_MODE7) /* (R7) gpmc_advn_ale.gpio2[2] - P8.7, LED_RED, GP1_PIN_5 */ |
| AM33XX_PADCONF(AM335X_PIN_GPMC_OEN_REN, PIN_OUTPUT, MUX_MODE7) /* (T7) gpmc_oen_ren.gpio2[3] - P8.8, LED_GREEN, GP1_PIN_6 */ |
| AM33XX_PADCONF(AM335X_PIN_GPMC_AD11, PIN_OUTPUT, MUX_MODE7) /* (U12) gpmc_ad11.gpio0[27] - P8.17, BATT_LED_1 */ |
| AM33XX_PADCONF(AM335X_PIN_LCD_DATA15, PIN_OUTPUT, MUX_MODE7) /* (T5) lcd_data15.gpio0[11] - P8.32, BATT_LED_2 */ |
| AM33XX_PADCONF(AM335X_PIN_GPMC_CSN0, PIN_OUTPUT, MUX_MODE7) /* (V6) gpmc_csn0.gpio1[29] - P8.26, BATT_LED_3 */ |
| AM33XX_PADCONF(AM335X_PIN_GPMC_AD10, PIN_OUTPUT, MUX_MODE7) /* (T11) gpmc_ad10.gpio0[26] - P8.14, BATT_LED_4 */ |
| |
| >; |
| }; |
| |
| i2c2_pins: i2c2-pins { |
| pinctrl-single,pins = < |
| AM33XX_PADCONF(AM335X_PIN_UART1_CTSN, PIN_INPUT_PULLUP, MUX_MODE3) /* (D18) uart1_ctsn.I2C2_SDA */ |
| AM33XX_PADCONF(AM335X_PIN_UART1_RTSN, PIN_INPUT_PULLUP, MUX_MODE3) /* (D17) uart1_rtsn.I2C2_SCL */ |
| >; |
| }; |
| |
| /* UT0 */ |
| uart0_pins: uart0-pins { |
| pinctrl-single,pins = < |
| AM33XX_PADCONF(AM335X_PIN_UART0_RXD, PIN_INPUT_PULLUP, MUX_MODE0) |
| AM33XX_PADCONF(AM335X_PIN_UART0_TXD, PIN_OUTPUT_PULLDOWN, MUX_MODE0) |
| >; |
| }; |
| |
| /* UT1 */ |
| uart1_pins: uart1-pins { |
| pinctrl-single,pins = < |
| AM33XX_PADCONF(AM335X_PIN_UART1_RXD, PIN_INPUT_PULLUP, MUX_MODE0) |
| AM33XX_PADCONF(AM335X_PIN_UART1_TXD, PIN_OUTPUT_PULLDOWN, MUX_MODE0) |
| >; |
| }; |
| |
| /* GPS */ |
| uart2_pins: uart2-pins { |
| pinctrl-single,pins = < |
| AM33XX_PADCONF(AM335X_PIN_SPI0_SCLK, PIN_INPUT_PULLUP, MUX_MODE1) /* (A17) spi0_sclk.uart2_rxd */ |
| AM33XX_PADCONF(AM335X_PIN_SPI0_D0, PIN_OUTPUT_PULLDOWN, MUX_MODE1) /* (B17) spi0_d0.uart2_txd */ |
| >; |
| }; |
| |
| /* DSM2 */ |
| uart4_pins: uart4-pins { |
| pinctrl-single,pins = < |
| AM33XX_PADCONF(AM335X_PIN_GPMC_WAIT0, PIN_INPUT_PULLUP, MUX_MODE6) /* (T17) gpmc_wait0.uart4_rxd */ |
| >; |
| }; |
| |
| /* UT5 */ |
| uart5_pins: uart5-pins { |
| pinctrl-single,pins = < |
| AM33XX_PADCONF(AM335X_PIN_LCD_DATA9, PIN_INPUT_PULLUP, MUX_MODE4) /* (U2) lcd_data9.uart5_rxd */ |
| AM33XX_PADCONF(AM335X_PIN_LCD_DATA8, PIN_OUTPUT_PULLDOWN, MUX_MODE4) /* (U1) lcd_data8.uart5_txd */ |
| >; |
| }; |
| |
| mmc1_pins: mmc1-pins { |
| pinctrl-single,pins = < |
| AM33XX_PADCONF(AM335X_PIN_SPI0_CS1, PIN_INPUT, MUX_MODE7) /* (C15) spi0_cs1.gpio0[6] */ |
| >; |
| }; |
| |
| mmc2_pins: mmc2-pins { |
| pinctrl-single,pins = < |
| AM33XX_PADCONF(AM335X_PIN_GPMC_CSN1, PIN_INPUT_PULLUP, MUX_MODE2) /* (U9) gpmc_csn1.mmc1_clk */ |
| AM33XX_PADCONF(AM335X_PIN_GPMC_CSN2, PIN_INPUT_PULLUP, MUX_MODE2) /* (V9) gpmc_csn2.mmc1_cmd */ |
| AM33XX_PADCONF(AM335X_PIN_GPMC_AD0, PIN_INPUT_PULLUP, MUX_MODE1) /* (U7) gpmc_ad0.mmc1_dat0 */ |
| AM33XX_PADCONF(AM335X_PIN_GPMC_AD1, PIN_INPUT_PULLUP, MUX_MODE1) /* (V7) gpmc_ad1.mmc1_dat1 */ |
| AM33XX_PADCONF(AM335X_PIN_GPMC_AD2, PIN_INPUT_PULLUP, MUX_MODE1) /* (R8) gpmc_ad2.mmc1_dat2 */ |
| AM33XX_PADCONF(AM335X_PIN_GPMC_AD3, PIN_INPUT_PULLUP, MUX_MODE1) /* (T8) gpmc_ad3.mmc1_dat3 */ |
| AM33XX_PADCONF(AM335X_PIN_GPMC_AD4, PIN_INPUT_PULLUP, MUX_MODE1) /* (U8) gpmc_ad4.mmc1_dat4 */ |
| AM33XX_PADCONF(AM335X_PIN_GPMC_AD5, PIN_INPUT_PULLUP, MUX_MODE1) /* (V8) gpmc_ad5.mmc1_dat5 */ |
| AM33XX_PADCONF(AM335X_PIN_GPMC_AD6, PIN_INPUT_PULLUP, MUX_MODE1) /* (R9) gpmc_ad6.mmc1_dat6 */ |
| AM33XX_PADCONF(AM335X_PIN_GPMC_AD7, PIN_INPUT_PULLUP, MUX_MODE1) /* (T9) gpmc_ad7.mmc1_dat7 */ |
| >; |
| }; |
| |
| mmc3_pins: mmc3-pins { |
| pinctrl-single,pins = < |
| AM33XX_PADCONF(AM335X_PIN_MII1_RXD1, PIN_INPUT_PULLUP, MUX_MODE6) /* (L15) gmii1_rxd1.mmc2_clk */ |
| AM33XX_PADCONF(AM335X_PIN_MII1_TX_EN, PIN_INPUT_PULLUP, MUX_MODE6) /* (J16) gmii1_txen.mmc2_cmd */ |
| AM33XX_PADCONF(AM335X_PIN_MII1_RX_DV, PIN_INPUT_PULLUP, MUX_MODE5) /* (J17) gmii1_rxdv.mmc2_dat0 */ |
| AM33XX_PADCONF(AM335X_PIN_MII1_TXD3, PIN_INPUT_PULLUP, MUX_MODE5) /* (J18) gmii1_txd3.mmc2_dat1 */ |
| AM33XX_PADCONF(AM335X_PIN_MII1_TXD2, PIN_INPUT_PULLUP, MUX_MODE5) /* (K15) gmii1_txd2.mmc2_dat2 */ |
| AM33XX_PADCONF(AM335X_PIN_MII1_COL, PIN_INPUT_PULLUP, MUX_MODE5) /* (H16) gmii1_col.mmc2_dat3 */ |
| >; |
| }; |
| |
| bt_pins: bt-pins { |
| pinctrl-single,pins = < |
| AM33XX_PADCONF(AM335X_PIN_MII1_TXD0, PIN_OUTPUT_PULLUP, MUX_MODE7) /* (K17) gmii1_txd0.gpio0[28] - BT_EN */ |
| >; |
| }; |
| |
| uart3_pins: uart3-pins { |
| pinctrl-single,pins = < |
| AM33XX_PADCONF(AM335X_PIN_MII1_RXD3, PIN_INPUT_PULLUP, MUX_MODE1) /* (L17) gmii1_rxd3.uart3_rxd */ |
| AM33XX_PADCONF(AM335X_PIN_MII1_RXD2, PIN_OUTPUT_PULLDOWN, MUX_MODE1) /* (L16) gmii1_rxd2.uart3_txd */ |
| AM33XX_PADCONF(AM335X_PIN_MDIO, PIN_INPUT, MUX_MODE3) /* (M17) mdio_data.uart3_ctsn */ |
| AM33XX_PADCONF(AM335X_PIN_MDC, PIN_OUTPUT_PULLDOWN, MUX_MODE3) /* (M18) mdio_clk.uart3_rtsn */ |
| >; |
| }; |
| |
| wl18xx_pins: wl18xx-pins { |
| pinctrl-single,pins = < |
| AM33XX_PADCONF(AM335X_PIN_MII1_TX_CLK, PIN_OUTPUT_PULLDOWN, MUX_MODE7) /* (K18) gmii1_txclk.gpio3[9] - WL_EN */ |
| AM33XX_PADCONF(AM335X_PIN_MII1_TXD1, PIN_INPUT_PULLDOWN, MUX_MODE7) /* (K16) gmii1_txd1.gpio0[21] - WL_IRQ */ |
| AM33XX_PADCONF(AM335X_PIN_MII1_RX_CLK, PIN_OUTPUT_PULLUP, MUX_MODE7) /* (L18) gmii1_rxclk.gpio3[10] - LS_BUF_EN */ |
| >; |
| }; |
| |
| /* DCAN */ |
| dcan1_pins: dcan1-pins { |
| pinctrl-single,pins = < |
| AM33XX_PADCONF(AM335X_PIN_UART0_RTSN, PIN_INPUT, MUX_MODE2) /* (E17) uart0_rtsn.dcan1_rx */ |
| AM33XX_PADCONF(AM335X_PIN_UART0_CTSN, PIN_OUTPUT, MUX_MODE2) /* (E18) uart0_ctsn.dcan1_tx */ |
| AM33XX_PADCONF(AM335X_PIN_MII1_RXD0, PIN_OUTPUT, MUX_MODE7) /* (M16) gmii1_rxd0.gpio2[21] */ |
| >; |
| }; |
| |
| /* E1 */ |
| eqep0_pins: eqep0-pins { |
| pinctrl-single,pins = < |
| AM33XX_PADCONF(AM335X_PIN_MCASP0_AXR0, PIN_INPUT, MUX_MODE1) /* (B12) mcasp0_aclkr.eQEP0A_in */ |
| AM33XX_PADCONF(AM335X_PIN_MCASP0_FSR, PIN_INPUT, MUX_MODE1) /* (C13) mcasp0_fsr.eQEP0B_in */ |
| >; |
| }; |
| |
| /* E2 */ |
| eqep1_pins: eqep1-pins { |
| pinctrl-single,pins = < |
| AM33XX_PADCONF(AM335X_PIN_LCD_DATA12, PIN_INPUT, MUX_MODE2) /* (V2) lcd_data12.eQEP1A_in */ |
| AM33XX_PADCONF(AM335X_PIN_LCD_DATA13, PIN_INPUT, MUX_MODE2) /* (V3) lcd_data13.eQEP1B_in */ |
| >; |
| }; |
| |
| /* E3 */ |
| eqep2_pins: eqep2-pins { |
| pinctrl-single,pins = < |
| AM33XX_PADCONF(AM335X_PIN_GPMC_AD12, PIN_INPUT, MUX_MODE4) /* (T12) gpmc_ad12.eQEP2A_in */ |
| AM33XX_PADCONF(AM335X_PIN_GPMC_AD13, PIN_INPUT, MUX_MODE4) /* (R12) gpmc_ad13.eQEP2B_in */ |
| >; |
| }; |
| }; |
| |
| &uart0 { |
| pinctrl-names = "default"; |
| pinctrl-0 = <&uart0_pins>; |
| |
| status = "okay"; |
| }; |
| |
| &uart1 { |
| pinctrl-names = "default"; |
| pinctrl-0 = <&uart1_pins>; |
| |
| status = "okay"; |
| }; |
| |
| &uart2 { |
| pinctrl-names = "default"; |
| pinctrl-0 = <&uart2_pins>; |
| |
| status = "okay"; |
| }; |
| |
| &uart4 { |
| pinctrl-names = "default"; |
| pinctrl-0 = <&uart4_pins>; |
| |
| status = "okay"; |
| }; |
| |
| &uart5 { |
| pinctrl-names = "default"; |
| pinctrl-0 = <&uart5_pins>; |
| |
| status = "okay"; |
| }; |
| |
| &usb0 { |
| dr_mode = "peripheral"; |
| interrupts-extended = <&intc 18 &tps 0>; |
| interrupt-names = "mc", "vbus"; |
| }; |
| |
| &usb1 { |
| dr_mode = "host"; |
| }; |
| |
| &i2c0 { |
| baseboard_eeprom: baseboard_eeprom@50 { |
| compatible = "atmel,24c256"; |
| reg = <0x50>; |
| |
| #address-cells = <1>; |
| #size-cells = <1>; |
| baseboard_data: baseboard_data@0 { |
| reg = <0 0x100>; |
| }; |
| }; |
| }; |
| |
| &i2c2 { |
| pinctrl-names = "default"; |
| pinctrl-0 = <&i2c2_pins>; |
| |
| status = "okay"; |
| clock-frequency = <400000>; |
| |
| mpu9250@68 { |
| compatible = "invensense,mpu9250"; |
| reg = <0x68>; |
| interrupt-parent = <&gpio3>; |
| interrupts = <21 IRQ_TYPE_EDGE_RISING>; |
| i2c-gate { |
| #address-cells = <1>; |
| #size-cells = <0>; |
| ax8975@c { |
| compatible = "asahi-kasei,ak8975"; |
| reg = <0x0c>; |
| }; |
| }; |
| }; |
| |
| pressure@76 { |
| compatible = "bosch,bmp280"; |
| reg = <0x76>; |
| }; |
| }; |
| |
| /include/ "../../tps65217.dtsi" |
| |
| &tps { |
| /delete-property/ ti,pmic-shutdown-controller; |
| |
| charger { |
| interrupts = <0>, <1>; |
| interrupt-names = "USB", "AC"; |
| status = "okay"; |
| }; |
| }; |
| |
| &mmc1 { |
| status = "okay"; |
| vmmc-supply = <&vmmcsd_fixed>; |
| bus-width = <4>; |
| pinctrl-names = "default"; |
| pinctrl-0 = <&mmc1_pins>; |
| cd-gpios = <&gpio0 6 GPIO_ACTIVE_LOW>; |
| }; |
| |
| &mmc2 { |
| status = "okay"; |
| vmmc-supply = <&vmmcsd_fixed>; |
| bus-width = <8>; |
| pinctrl-names = "default"; |
| pinctrl-0 = <&mmc2_pins>; |
| }; |
| |
| &mmc3 { |
| dmas = <&edma_xbar 12 0 1 |
| &edma_xbar 13 0 2>; |
| dma-names = "tx", "rx"; |
| status = "okay"; |
| vmmc-supply = <&wlan_en_reg>; |
| bus-width = <4>; |
| non-removable; |
| cap-power-off-card; |
| keep-power-in-suspend; |
| pinctrl-names = "default"; |
| pinctrl-0 = <&mmc3_pins &wl18xx_pins>; |
| |
| #address-cells = <1>; |
| #size-cells = <0>; |
| wlcore: wlcore@2 { |
| compatible = "ti,wl1835"; |
| reg = <2>; |
| interrupt-parent = <&gpio0>; |
| interrupts = <21 IRQ_TYPE_EDGE_RISING>; |
| }; |
| }; |
| |
| &tscadc { |
| status = "okay"; |
| adc { |
| ti,adc-channels = <0 1 2 3 4 5 6 7>; |
| }; |
| }; |
| |
| &uart3 { |
| pinctrl-names = "default"; |
| pinctrl-0 = <&uart3_pins &bt_pins>; |
| status = "okay"; |
| |
| bluetooth { |
| compatible = "ti,wl1835-st"; |
| enable-gpios = <&gpio0 28 GPIO_ACTIVE_HIGH>; |
| }; |
| }; |
| |
| &rtc { |
| system-power-controller; |
| clocks = <&clk_32768_ck>, <&clk_24mhz_clkctrl AM3_CLK_24MHZ_CLKDIV32K_CLKCTRL 0>; |
| clock-names = "ext-clk", "int-clk"; |
| }; |
| |
| &dcan1 { |
| pinctrl-names = "default"; |
| pinctrl-0 = <&dcan1_pins>; |
| status = "okay"; |
| }; |
| |
| &gpio0 { |
| gpio-line-names = |
| "UART3_CTS", /* M17 */ |
| "UART3_RTS", /* M18 */ |
| "UART2_RX", /* A17 */ |
| "UART2_TX", /* B17 */ |
| "I2C1_SDA", /* B16 */ |
| "I2C1_SCL", /* A16 */ |
| "MMC0_CD", /* C15 */ |
| "SPI1_SS2", /* C18 */ |
| "EQEP_1A", /* V2 */ |
| "EQEP_1B", /* V3 */ |
| "MDIR_2B", /* V4 */ |
| "BATT_LED_2", /* T5 */ |
| "I2C2_SDA", /* D18 */ |
| "I2C2_SCL", /* D17 */ |
| "UART1_RX", /* D16 */ |
| "UART1_TX", /* D15 */ |
| "MMC2_DAT1", /* J18 */ |
| "MMC2_DAT2", /* K15 */ |
| "NC", /* F16 */ |
| "WIFI_LED", /* A15 */ |
| "MOT_STBY", /* D14 */ |
| "WLAN_IRQ", /* K16 */ |
| "PWM_2A", /* U10 */ |
| "PWM_2B", /* T10 */ |
| "", |
| "", |
| "BATT_LED_4", /* T11 */ |
| "BATT_LED_1", /* U12 */ |
| "BT_EN", /* K17 */ |
| "SPI1_SS1", /* H18 */ |
| "UART4_RX", /* T17 */ |
| "MDIR_1B"; /* U17 */ |
| }; |
| |
| &gpio1 { |
| gpio-line-names = |
| "MMC1_DAT0", /* U7 */ |
| "MMC1_DAT1", /* V7 */ |
| "MMC1_DAT2", /* R8 */ |
| "MMC1_DAT3", /* T8 */ |
| "MMC1_DAT4", /* U8 */ |
| "MMC1_DAT5", /* V8 */ |
| "MMC1_DAT6", /* R9 */ |
| "MMC1_DAT7", /* T9 */ |
| "DCAN1_TX", /* E18 */ |
| "DCAN1_RX", /* E17 */ |
| "UART0_RX", /* E15 */ |
| "UART0_TX", /* E16 */ |
| "EQEP_2A", /* T12 */ |
| "EQEP_2B", /* R12 */ |
| "PRU_E_A", /* V13 */ |
| "PRU_E_B", /* U13 */ |
| "MDIR_2A", /* R13 */ |
| "GPIO1_17", /* V14 */ |
| "PWM_1A", /* U14 */ |
| "PWM_1B", /* T14 */ |
| "EMMC_RST", /* R14 */ |
| "USR_LED_0", /* V15 */ |
| "USR_LED_1", /* U15 */ |
| "USR_LED_2", /* T15 */ |
| "USR_LED_3", /* V16 */ |
| "GPIO1_25", /* U16 */ |
| "MCASP0_AXR0", /* T16 */ |
| "MCASP0_AXR1", /* V17 */ |
| "MCASP0_ACLKR", /* U18 */ |
| "BATT_LED_3", /* V6 */ |
| "MMC1_CLK", /* U9 */ |
| "MMC1_CMD"; /* V9 */ |
| }; |
| |
| &gpio2 { |
| gpio-line-names = |
| "MDIR_1A", /* T13 */ |
| "MCASP0_FSR", /* V12 */ |
| "LED_RED", /* R7 */ |
| "LED_GREEN", /* T7 */ |
| "MODE_BTN", /* U6 */ |
| "PAUSE_BTN", /* T6 */ |
| "MDIR_4A", /* R1 */ |
| "MDIR_4B", /* R2 */ |
| "MDIR_3B", /* R3 */ |
| "MDIR_3A", /* R4 */ |
| "SVO7", /* T1 */ |
| "SVO8", /* T2 */ |
| "SVO5", /* T3 */ |
| "SVO6", /* T4 */ |
| "UART5_TX", /* U1 */ |
| "UART5_RX", /* U2 */ |
| "SERVO_EN", /* U3 */ |
| "NC", /* U4 */ |
| "UART3_RX", /* L17 */ |
| "UART3_TX", /* L16 */ |
| "MMC2_CLK", /* L15 */ |
| "DCAN1_SILENT", /* M16 */ |
| "SVO1", /* U5 */ |
| "SVO3", /* R5 */ |
| "SVO2", /* V5 */ |
| "SVO4", /* R6 */ |
| "MMC0_DAT3", /* F17 */ |
| "MMC0_DAT2", /* F18 */ |
| "MMC0_DAT1", /* G15 */ |
| "MMC0_DAT0", /* G16 */ |
| "MMC0_CLK", /* G17 */ |
| "MMC0_CMD"; /* G18 */ |
| }; |
| |
| &gpio3 { |
| gpio-line-names = |
| "MMC2_DAT3", /* H16 */ |
| "GPIO3_1", /* H17 */ |
| "GPIO3_2", /* J15 */ |
| "MMC2_CMD", /* J16 */ |
| "MMC2_DAT0", /* J17 */ |
| "I2C0_SDA", /* C17 */ |
| "I2C0_SCL", /* C16 */ |
| "EMU1", /* C14 */ |
| "EMU0", /* B14 */ |
| "WL_EN", /* K18 */ |
| "WL_BT_OE", /* L18 */ |
| "", |
| "", |
| "NC", /* F15 */ |
| "SPI1_SCK", /* A13 */ |
| "SPI1_MISO", /* B13 */ |
| "SPI1_MOSI", /* D12 */ |
| "GPIO3_17", /* C12 */ |
| "EQEP_0A", /* B12 */ |
| "EQEP_0B", /* C13 */ |
| "GPIO3_20", /* D13 */ |
| "IMU_INT", /* A14 */ |
| "", |
| "", |
| "", |
| "", |
| "", |
| "", |
| "", |
| "", |
| "", |
| ""; |
| |
| ls-buf-en-hog { |
| gpio-hog; |
| gpios = <10 GPIO_ACTIVE_HIGH>; |
| output-high; |
| }; |
| }; |
| |
| &epwmss0 { |
| status = "okay"; |
| }; |
| |
| &eqep0 { |
| pinctrl-names = "default"; |
| pinctrl-0 = <&eqep0_pins>; |
| status = "okay"; |
| }; |
| |
| &epwmss1 { |
| status = "okay"; |
| }; |
| |
| &eqep1 { |
| pinctrl-names = "default"; |
| pinctrl-0 = <&eqep1_pins>; |
| status = "okay"; |
| }; |
| |
| &epwmss2 { |
| status = "okay"; |
| }; |
| |
| &eqep2 { |
| pinctrl-names = "default"; |
| pinctrl-0 = <&eqep2_pins>; |
| status = "okay"; |
| }; |
