| // SPDX-License-Identifier: GPL-2.0 |
| /* |
| * Copyright (C) 2017 Texas Instruments Incorporated - https://www.ti.com/ |
| */ |
| |
| #include <dt-bindings/gpio/gpio.h> |
| #include <dt-bindings/interrupt-controller/irq.h> |
| #include "am57xx-idk-common.dtsi" |
| #include "dra74-ipu-dsp-common.dtsi" |
| |
| / { |
| memory@0 { |
| device_type = "memory"; |
| reg = <0x0 0x80000000 0x0 0x80000000>; |
| }; |
| |
| reserved-memory { |
| #address-cells = <2>; |
| #size-cells = <2>; |
| ranges; |
| |
| ipu2_memory_region: ipu2-memory@95800000 { |
| compatible = "shared-dma-pool"; |
| reg = <0x0 0x95800000 0x0 0x3800000>; |
| reusable; |
| status = "okay"; |
| }; |
| |
| dsp1_memory_region: dsp1-memory@99000000 { |
| compatible = "shared-dma-pool"; |
| reg = <0x0 0x99000000 0x0 0x4000000>; |
| reusable; |
| status = "okay"; |
| }; |
| |
| ipu1_memory_region: ipu1-memory@9d000000 { |
| compatible = "shared-dma-pool"; |
| reg = <0x0 0x9d000000 0x0 0x2000000>; |
| reusable; |
| status = "okay"; |
| }; |
| |
| dsp2_memory_region: dsp2-memory@9f000000 { |
| compatible = "shared-dma-pool"; |
| reg = <0x0 0x9f000000 0x0 0x800000>; |
| reusable; |
| status = "okay"; |
| }; |
| }; |
| |
| status-leds { |
| compatible = "gpio-leds"; |
| cpu0-led { |
| label = "status0:red:cpu0"; |
| gpios = <&gpio4 0 GPIO_ACTIVE_HIGH>; |
| default-state = "off"; |
| linux,default-trigger = "cpu0"; |
| }; |
| |
| usr0-led { |
| label = "status0:green:usr"; |
| gpios = <&gpio3 11 GPIO_ACTIVE_HIGH>; |
| default-state = "off"; |
| }; |
| |
| heartbeat-led { |
| label = "status0:blue:heartbeat"; |
| gpios = <&gpio3 12 GPIO_ACTIVE_HIGH>; |
| default-state = "off"; |
| linux,default-trigger = "heartbeat"; |
| }; |
| |
| cpu1-led { |
| label = "status1:red:cpu1"; |
| gpios = <&gpio3 10 GPIO_ACTIVE_HIGH>; |
| default-state = "off"; |
| linux,default-trigger = "cpu1"; |
| }; |
| |
| usr1-led { |
| label = "status1:green:usr"; |
| gpios = <&gpio7 23 GPIO_ACTIVE_HIGH>; |
| default-state = "off"; |
| }; |
| |
| mmc0-led { |
| label = "status1:blue:mmc0"; |
| gpios = <&gpio7 22 GPIO_ACTIVE_HIGH>; |
| default-state = "off"; |
| linux,default-trigger = "mmc0"; |
| }; |
| }; |
| |
| idk-leds { |
| status = "disabled"; |
| compatible = "gpio-leds"; |
| red0-led { |
| label = "idk:red0"; |
| gpios = <&gpio6 19 GPIO_ACTIVE_HIGH>; |
| default-state = "off"; |
| }; |
| |
| green0-led { |
| label = "idk:green0"; |
| gpios = <&gpio3 9 GPIO_ACTIVE_HIGH>; |
| default-state = "off"; |
| }; |
| |
| blue0-led { |
| label = "idk:blue0"; |
| gpios = <&gpio1 4 GPIO_ACTIVE_HIGH>; |
| default-state = "off"; |
| }; |
| |
| red1-led { |
| label = "idk:red1"; |
| gpios = <&gpio6 7 GPIO_ACTIVE_HIGH>; |
| default-state = "off"; |
| }; |
| |
| green1-led { |
| label = "idk:green1"; |
| gpios = <&gpio2 29 GPIO_ACTIVE_HIGH>; |
| default-state = "off"; |
| }; |
| |
| blue1-led { |
| label = "idk:blue1"; |
| gpios = <&gpio1 5 GPIO_ACTIVE_HIGH>; |
| default-state = "off"; |
| }; |
| |
| red2-led { |
| label = "idk:red2"; |
| gpios = <&gpio7 9 GPIO_ACTIVE_HIGH>; |
| default-state = "off"; |
| }; |
| |
| green2-led { |
| label = "idk:green2"; |
| gpios = <&gpio7 8 GPIO_ACTIVE_HIGH>; |
| default-state = "off"; |
| }; |
| |
| blue2-led { |
| label = "idk:blue2"; |
| gpios = <&gpio7 10 GPIO_ACTIVE_HIGH>; |
| default-state = "off"; |
| }; |
| |
| red3-led { |
| label = "idk:red3"; |
| gpios = <&gpio7 11 GPIO_ACTIVE_HIGH>; |
| default-state = "off"; |
| }; |
| |
| green3-led { |
| label = "idk:green3"; |
| gpios = <&gpio3 17 GPIO_ACTIVE_HIGH>; |
| default-state = "off"; |
| }; |
| |
| blue3-led { |
| label = "idk:blue3"; |
| gpios = <&gpio3 18 GPIO_ACTIVE_HIGH>; |
| default-state = "off"; |
| }; |
| }; |
| }; |
| |
| &extcon_usb2 { |
| id-gpios = <&gpio3 16 GPIO_ACTIVE_HIGH>; |
| vbus-gpios = <&gpio3 26 GPIO_ACTIVE_HIGH>; |
| }; |
| |
| &sn65hvs882 { |
| load-gpios = <&gpio3 19 GPIO_ACTIVE_LOW>; |
| }; |
| |
| &pcie1_rc { |
| status = "okay"; |
| gpios = <&gpio3 23 GPIO_ACTIVE_HIGH>; |
| }; |
| |
| &ipu2 { |
| status = "okay"; |
| memory-region = <&ipu2_memory_region>; |
| }; |
| |
| &ipu1 { |
| status = "okay"; |
| memory-region = <&ipu1_memory_region>; |
| }; |
| |
| &dsp1 { |
| status = "okay"; |
| memory-region = <&dsp1_memory_region>; |
| }; |
| |
| &dsp2 { |
| status = "okay"; |
| memory-region = <&dsp2_memory_region>; |
| }; |