| // SPDX-License-Identifier: GPL-2.0-only |
| |
| / { |
| gpio_keys { |
| compatible = "gpio-keys"; |
| pinctrl-names = "default"; |
| pinctrl-0 = <&gpio_key_pins &gpio_key_pins_wkup>; |
| |
| sysboot2 { |
| label = "sysboot2"; |
| gpios = <&gpio1 2 GPIO_ACTIVE_LOW>; /* gpio2 */ |
| linux,code = <BTN_0>; |
| wakeup-source; |
| }; |
| |
| sysboot5 { |
| label = "sysboot5"; |
| gpios = <&gpio1 7 GPIO_ACTIVE_LOW>; /* gpio7 */ |
| linux,code = <BTN_1>; |
| wakeup-source; |
| }; |
| |
| gpio1 { |
| label = "gpio1"; |
| gpios = <&gpio6 21 GPIO_ACTIVE_LOW>; /* gpio181 */ |
| linux,code = <BTN_2>; |
| wakeup-source; |
| }; |
| |
| gpio2 { |
| label = "gpio2"; |
| gpios = <&gpio6 18 GPIO_ACTIVE_LOW>; /* gpio178 */ |
| linux,code = <BTN_3>; |
| wakeup-source; |
| }; |
| }; |
| |
| sound { |
| compatible = "ti,omap-twl4030"; |
| ti,model = "omap3logic"; |
| ti,mcbsp = <&mcbsp2>; |
| }; |
| |
| leds { |
| compatible = "gpio-leds"; |
| pinctrl-names = "default"; |
| pinctrl-0 = <&led_pins>; |
| |
| led1 { |
| label = "led1"; |
| gpios = <&gpio6 20 GPIO_ACTIVE_HIGH>; /* gpio180 */ |
| linux,default-trigger = "cpu0"; |
| }; |
| |
| led2 { |
| label = "led2"; |
| gpios = <&gpio6 19 GPIO_ACTIVE_HIGH>; /* gpio179 */ |
| linux,default-trigger = "none"; |
| }; |
| }; |
| |
| pwm10: pwm-10 { |
| compatible = "ti,omap-dmtimer-pwm"; |
| pinctrl-names = "default"; |
| pinctrl-0 = <&pwm_pins>; |
| ti,timers = <&timer10>; |
| #pwm-cells = <3>; |
| ti,clock-source = <0x01>; |
| }; |
| |
| }; |
| |
| &vaux1 { |
| regulator-min-microvolt = <3000000>; |
| regulator-max-microvolt = <3000000>; |
| }; |
| |
| &vaux4 { |
| regulator-min-microvolt = <1800000>; |
| regulator-max-microvolt = <1800000>; |
| }; |
| |
| &mcbsp2 { |
| pinctrl-names = "default"; |
| pinctrl-0 = <&mcbsp2_pins>; |
| status = "okay"; |
| }; |
| |
| &charger { |
| ti,bb-uvolt = <3200000>; |
| ti,bb-uamp = <150>; |
| }; |
| |
| &gpmc { |
| ranges = <0 0 0x30000000 0x1000000 /* CS0: 16MB for NAND */ |
| 1 0 0x2c000000 0x1000000 /* CS1: 16MB for LAN9221 */ |
| 6 0 0x28000000 0x1000000>; /* CS6: 16MB for ISP1763 */ |
| |
| ethernet@gpmc { |
| pinctrl-names = "default"; |
| pinctrl-0 = <&lan9221_pins>; |
| interrupt-parent = <&gpio5>; |
| interrupts = <1 IRQ_TYPE_LEVEL_LOW>; /* gpio129 */ |
| reg = <1 0 0xff>; |
| }; |
| |
| usb@6,0 { |
| pinctrl-names = "default"; |
| pinctrl-0 = <&isp1763_pins>; |
| compatible = "nxp,usb-isp1763"; |
| reg = <0x6 0x0 0xff>; |
| interrupt-parent = <&gpio5>; |
| interrupts = <0 IRQ_TYPE_LEVEL_LOW>; |
| interrupt-names = "host"; |
| bus-width = <16>; |
| dr_mode = "host"; |
| gpmc,mux-add-data = <0>; |
| gpmc,device-width = <2>; |
| gpmc,wait-pin = <0>; |
| gpmc,burst-length = <4>; |
| gpmc,cycle2cycle-samecsen; |
| gpmc,cycle2cycle-diffcsen; |
| gpmc,cs-on-ns = <0>; |
| gpmc,cs-rd-off-ns = <45>; |
| gpmc,cs-wr-off-ns = <45>; |
| gpmc,adv-on-ns = <0>; |
| gpmc,adv-rd-off-ns = <0>; |
| gpmc,adv-wr-off-ns = <0>; |
| gpmc,oe-on-ns = <0>; |
| gpmc,oe-off-ns = <45>; |
| gpmc,we-on-ns = <0>; |
| gpmc,we-off-ns = <25>; |
| gpmc,rd-cycle-ns = <60>; |
| gpmc,wr-cycle-ns = <45>; |
| gpmc,access-ns = <35>; |
| gpmc,page-burst-access-ns = <0>; |
| gpmc,bus-turnaround-ns = <0>; |
| gpmc,cycle2cycle-delay-ns = <60>; |
| gpmc,wait-monitoring-ns = <0>; |
| gpmc,clk-activation-ns = <0>; |
| gpmc,wr-data-mux-bus-ns = <5>; |
| gpmc,wr-access-ns = <20>; |
| }; |
| }; |
| |
| &hdqw1w { |
| pinctrl-names = "default"; |
| pinctrl-0 = <&hdq_pins>; |
| }; |
| |
| |
| &vpll2 { |
| regulator-always-on; |
| }; |
| |
| &dss { |
| status = "okay"; |
| vdds_dsi-supply = <&vpll2>; |
| vdda_video-supply = <&vpll2>; |
| pinctrl-names = "default"; |
| pinctrl-0 = <&dss_dpi_pins1>; |
| port { |
| dpi_out: endpoint { |
| remote-endpoint = <&lcd_in>; |
| data-lines = <16>; |
| }; |
| }; |
| }; |
| |
| / { |
| aliases { |
| display0 = &lcd0; |
| }; |
| |
| lcd0: display { |
| /* This isn't the exact LCD, but the timings meet spec */ |
| compatible = "newhaven,nhd-4.3-480272ef-atxl"; |
| label = "15"; |
| pinctrl-names = "default"; |
| pinctrl-0 = <&panel_pwr_pins>; |
| backlight = <&bl>; |
| enable-gpios = <&gpio5 27 GPIO_ACTIVE_HIGH>; |
| port { |
| lcd_in: endpoint { |
| remote-endpoint = <&dpi_out>; |
| }; |
| }; |
| }; |
| |
| bl: backlight { |
| compatible = "pwm-backlight"; |
| pinctrl-names = "default"; |
| pinctrl-0 = <&backlight_pins>; |
| pwms = <&pwm10 0 5000000 0>; |
| brightness-levels = <0 10 20 30 40 50 60 70 80 90 100>; |
| default-brightness-level = <7>; |
| enable-gpios = <&gpio5 26 GPIO_ACTIVE_HIGH>; /* gpio_154 */ |
| }; |
| }; |
| |
| &mmc1 { |
| interrupts-extended = <&intc 83 &omap3_pmx_core 0x11a>; |
| pinctrl-names = "default"; |
| pinctrl-0 = <&mmc1_pins &mmc1_cd>; |
| cd-gpios = <&gpio4 31 GPIO_ACTIVE_LOW>; /* gpio127 */ |
| vmmc-supply = <&vmmc1>; |
| bus-width = <4>; |
| cap-power-off-card; |
| }; |
| |
| &omap3_pmx_core { |
| gpio_key_pins: gpio-key-pins { |
| pinctrl-single,pins = < |
| OMAP3_CORE1_IOPAD(0x21d6, PIN_INPUT_PULLUP | MUX_MODE4) /* mcspi2_clk.gpio_178 */ |
| OMAP3_CORE1_IOPAD(0x21dc, PIN_INPUT_PULLUP | MUX_MODE4) /* mcspi2_cs0.gpio_181 */ |
| >; |
| }; |
| |
| hdq_pins: hdq-pins { |
| pinctrl-single,pins = < |
| OMAP3_CORE1_IOPAD(0x21c6, PIN_INPUT_PULLUP | MUX_MODE0) /* hdq_sio */ |
| >; |
| }; |
| |
| pwm_pins: pwm-pins { |
| pinctrl-single,pins = < |
| OMAP3_CORE1_IOPAD(0x20B8, PIN_OUTPUT | PIN_OFF_OUTPUT_LOW | MUX_MODE3) /* gpmc_ncs5.gpt_10_pwm_evt */ |
| >; |
| }; |
| |
| led_pins: led-pins { |
| pinctrl-single,pins = < |
| OMAP3_CORE1_IOPAD(0x21d8, PIN_OUTPUT | MUX_MODE4) /* gpio_179 */ |
| OMAP3_CORE1_IOPAD(0x21da, PIN_OUTPUT | MUX_MODE4) /* gpio_180 */ |
| >; |
| }; |
| |
| mmc1_pins: mmc1-pins { |
| pinctrl-single,pins = < |
| OMAP3_CORE1_IOPAD(0x2144, PIN_OUTPUT | MUX_MODE0) /* sdmmc1_clk.sdmmc1_clk */ |
| OMAP3_CORE1_IOPAD(0x2146, PIN_INPUT | MUX_MODE0) /* sdmmc1_cmd.sdmmc1_cmd */ |
| OMAP3_CORE1_IOPAD(0x2148, PIN_INPUT | MUX_MODE0) /* sdmmc1_dat0.sdmmc1_dat0 */ |
| OMAP3_CORE1_IOPAD(0x214a, PIN_INPUT | MUX_MODE0) /* sdmmc1_dat1.sdmmc1_dat1 */ |
| OMAP3_CORE1_IOPAD(0x214c, PIN_INPUT | MUX_MODE0) /* sdmmc1_dat2.sdmmc1_dat2 */ |
| OMAP3_CORE1_IOPAD(0x214e, PIN_INPUT | MUX_MODE0) /* sdmmc1_dat3.sdmmc1_dat3 */ |
| >; |
| }; |
| |
| tsc2004_pins: tsc2004-pins { |
| pinctrl-single,pins = < |
| OMAP3_CORE1_IOPAD(0x2186, PIN_INPUT | MUX_MODE4) /* mcbsp4_dr.gpio_153 */ |
| >; |
| }; |
| |
| backlight_pins: backlight-pins { |
| pinctrl-single,pins = < |
| OMAP3_CORE1_IOPAD(0x2188, PIN_OUTPUT | PIN_OFF_OUTPUT_LOW | MUX_MODE4) /* mcbsp4_dx.gpio_154 */ |
| >; |
| }; |
| |
| isp_pins: isp-pins { |
| pinctrl-single,pins = < |
| OMAP3_CORE1_IOPAD(0x210c, PIN_INPUT | MUX_MODE0) /* cam_hs.cam_hs */ |
| OMAP3_CORE1_IOPAD(0x210e, PIN_INPUT | MUX_MODE0) /* cam_vs.cam_vs */ |
| OMAP3_CORE1_IOPAD(0x2110, PIN_INPUT | MUX_MODE0) /* cam_xclka.cam_xclka */ |
| OMAP3_CORE1_IOPAD(0x2112, PIN_INPUT | MUX_MODE0) /* cam_pclk.cam_pclk */ |
| |
| OMAP3_CORE1_IOPAD(0x2116, PIN_INPUT | MUX_MODE0) /* cam_d0.cam_d0 */ |
| OMAP3_CORE1_IOPAD(0x2118, PIN_INPUT | MUX_MODE0) /* cam_d1.cam_d1 */ |
| OMAP3_CORE1_IOPAD(0x211a, PIN_INPUT | MUX_MODE0) /* cam_d2.cam_d2 */ |
| OMAP3_CORE1_IOPAD(0x211c, PIN_INPUT | MUX_MODE0) /* cam_d3.cam_d3 */ |
| OMAP3_CORE1_IOPAD(0x211e, PIN_INPUT | MUX_MODE0) /* cam_d4.cam_d4 */ |
| OMAP3_CORE1_IOPAD(0x2120, PIN_INPUT | MUX_MODE0) /* cam_d5.cam_d5 */ |
| OMAP3_CORE1_IOPAD(0x2122, PIN_INPUT | MUX_MODE0) /* cam_d6.cam_d6 */ |
| OMAP3_CORE1_IOPAD(0x2124, PIN_INPUT | MUX_MODE0) /* cam_d7.cam_d7 */ |
| >; |
| }; |
| |
| panel_pwr_pins: panel-pwr-pins { |
| pinctrl-single,pins = < |
| OMAP3_CORE1_IOPAD(0x218a, PIN_OUTPUT | PIN_OFF_OUTPUT_LOW | MUX_MODE4) /* mcbsp4_fs.gpio_155 */ |
| >; |
| }; |
| |
| dss_dpi_pins1: dss-dpi1-pins { |
| pinctrl-single,pins = < |
| OMAP3_CORE1_IOPAD(0x20d4, PIN_OUTPUT_PULLDOWN | PIN_OFF_OUTPUT_LOW | MUX_MODE0) /* dss_pclk.dss_pclk */ |
| OMAP3_CORE1_IOPAD(0x20d6, PIN_OUTPUT_PULLDOWN | PIN_OFF_OUTPUT_LOW | MUX_MODE0) /* dss_hsync.dss_hsync */ |
| OMAP3_CORE1_IOPAD(0x20d8, PIN_OUTPUT_PULLDOWN | PIN_OFF_OUTPUT_LOW | MUX_MODE0) /* dss_vsync.dss_vsync */ |
| OMAP3_CORE1_IOPAD(0x20da, PIN_OUTPUT_PULLDOWN | PIN_OFF_OUTPUT_LOW | MUX_MODE0) /* dss_acbias.dss_acbias */ |
| |
| OMAP3_CORE1_IOPAD(0x20e8, PIN_OUTPUT_PULLDOWN | PIN_OFF_OUTPUT_LOW | MUX_MODE0) /* dss_data6.dss_data6 */ |
| OMAP3_CORE1_IOPAD(0x20ea, PIN_OUTPUT_PULLDOWN | PIN_OFF_OUTPUT_LOW | MUX_MODE0) /* dss_data7.dss_data7 */ |
| OMAP3_CORE1_IOPAD(0x20ec, PIN_OUTPUT_PULLDOWN | PIN_OFF_OUTPUT_LOW | MUX_MODE0) /* dss_data8.dss_data8 */ |
| OMAP3_CORE1_IOPAD(0x20ee, PIN_OUTPUT_PULLDOWN | PIN_OFF_OUTPUT_LOW | MUX_MODE0) /* dss_data9.dss_data9 */ |
| OMAP3_CORE1_IOPAD(0x20f0, PIN_OUTPUT_PULLDOWN | PIN_OFF_OUTPUT_LOW | MUX_MODE0) /* dss_data10.dss_data10 */ |
| OMAP3_CORE1_IOPAD(0x20f2, PIN_OUTPUT_PULLDOWN | PIN_OFF_OUTPUT_LOW | MUX_MODE0) /* dss_data11.dss_data11 */ |
| OMAP3_CORE1_IOPAD(0x20f4, PIN_OUTPUT_PULLDOWN | PIN_OFF_OUTPUT_LOW | MUX_MODE0) /* dss_data12.dss_data12 */ |
| OMAP3_CORE1_IOPAD(0x20f6, PIN_OUTPUT_PULLDOWN | PIN_OFF_OUTPUT_LOW | MUX_MODE0) /* dss_data13.dss_data13 */ |
| OMAP3_CORE1_IOPAD(0x20f8, PIN_OUTPUT_PULLDOWN | PIN_OFF_OUTPUT_LOW | MUX_MODE0) /* dss_data14.dss_data14 */ |
| OMAP3_CORE1_IOPAD(0x20fa, PIN_OUTPUT_PULLDOWN | PIN_OFF_OUTPUT_LOW | MUX_MODE0) /* dss_data15.dss_data15 */ |
| OMAP3_CORE1_IOPAD(0x20fc, PIN_OUTPUT_PULLDOWN | PIN_OFF_OUTPUT_LOW | MUX_MODE0) /* dss_data16.dss_data16 */ |
| OMAP3_CORE1_IOPAD(0x20fe, PIN_OUTPUT_PULLDOWN | PIN_OFF_OUTPUT_LOW | MUX_MODE0) /* dss_data17.dss_data17 */ |
| |
| OMAP3_CORE1_IOPAD(0x2100, PIN_OUTPUT_PULLDOWN | PIN_OFF_OUTPUT_LOW | MUX_MODE3) /* dss_data18.dss_data0 */ |
| OMAP3_CORE1_IOPAD(0x2102, PIN_OUTPUT_PULLDOWN | PIN_OFF_OUTPUT_LOW | MUX_MODE3) /* dss_data19.dss_data1 */ |
| OMAP3_CORE1_IOPAD(0x2104, PIN_OUTPUT_PULLDOWN | PIN_OFF_OUTPUT_LOW | MUX_MODE3) /* dss_data20.dss_data2 */ |
| OMAP3_CORE1_IOPAD(0x2106, PIN_OUTPUT_PULLDOWN | PIN_OFF_OUTPUT_LOW | MUX_MODE3) /* dss_data21.dss_data3 */ |
| OMAP3_CORE1_IOPAD(0x2108, PIN_OUTPUT_PULLDOWN | PIN_OFF_OUTPUT_LOW | MUX_MODE3) /* dss_data22.dss_data4 */ |
| OMAP3_CORE1_IOPAD(0x210a, PIN_OUTPUT_PULLDOWN | PIN_OFF_OUTPUT_LOW | MUX_MODE3) /* dss_data23.dss_data5 */ |
| >; |
| }; |
| }; |
| |
| &omap3_pmx_wkup { |
| gpio_key_pins_wkup: gpio-key-wkup-pins { |
| pinctrl-single,pins = < |
| OMAP3_WKUP_IOPAD(0x2a0a, PIN_INPUT_PULLUP | MUX_MODE4) /* sys_boot0.gpio_2 */ |
| OMAP3_WKUP_IOPAD(0x2a14, PIN_INPUT_PULLUP | MUX_MODE4) /* sys_boot5.gpio_7 */ |
| >; |
| }; |
| |
| lan9221_pins: lan9221-pins { |
| pinctrl-single,pins = < |
| OMAP3_WKUP_IOPAD(0x2a5a, PIN_INPUT | MUX_MODE4) /* reserved.gpio_129 */ |
| >; |
| }; |
| |
| mmc1_cd: mmc1-cd-pins { |
| pinctrl-single,pins = < |
| OMAP3_WKUP_IOPAD(0x2a54, PIN_INPUT_PULLUP | MUX_MODE4) /* reserved.gpio_127 */ |
| >; |
| }; |
| }; |
| |
| &i2c2 { |
| mt9p031@48 { |
| compatible = "aptina,mt9p031"; |
| reg = <0x48>; |
| clocks = <&isp 0>; |
| vaa-supply = <&vaux4>; |
| vdd-supply = <&vaux4>; |
| vdd_io-supply = <&vaux4>; |
| port { |
| mt9p031_out: endpoint { |
| input-clock-frequency = <24000000>; |
| pixel-clock-frequency = <72000000>; |
| remote-endpoint = <&ccdc_ep>; |
| }; |
| }; |
| }; |
| }; |
| |
| &i2c3 { |
| touchscreen: tsc2004@48 { |
| compatible = "ti,tsc2004"; |
| reg = <0x48>; |
| vio-supply = <&vaux1>; |
| pinctrl-names = "default"; |
| pinctrl-0 = <&tsc2004_pins>; |
| interrupts-extended = <&gpio5 25 IRQ_TYPE_EDGE_RISING>; /* gpio 153 */ |
| |
| touchscreen-fuzz-x = <4>; |
| touchscreen-fuzz-y = <7>; |
| touchscreen-fuzz-pressure = <2>; |
| touchscreen-size-x = <4096>; |
| touchscreen-size-y = <4096>; |
| touchscreen-max-pressure = <2048>; |
| |
| ti,x-plate-ohms = <280>; |
| ti,esd-recovery-timeout-ms = <8000>; |
| }; |
| }; |
| |
| &mcspi1 { |
| at25@0 { |
| compatible = "atmel,at25"; |
| reg = <0>; |
| spi-max-frequency = <5000000>; |
| spi-cpha; |
| spi-cpol; |
| |
| pagesize = <64>; |
| size = <32768>; |
| address-width = <16>; |
| }; |
| }; |
| |
| &isp { |
| pinctrl-names = "default"; |
| pinctrl-0 = <&isp_pins>; |
| ports { |
| port@0 { |
| reg = <0>; |
| ccdc_ep: endpoint { |
| remote-endpoint = <&mt9p031_out>; |
| bus-width = <8>; |
| hsync-active = <1>; |
| vsync-active = <1>; |
| pclk-sample = <0>; |
| }; |
| }; |
| }; |
| }; |
| |
| &uart1 { |
| interrupts-extended = <&intc 72 &omap3_pmx_core OMAP3_UART1_RX>; |
| }; |
| |
| /* Wired to the tps65950 on the SOM, only the USB connector is on the devkit */ |
| &usb_otg_hs { |
| pinctrl-names = "default"; |
| pinctrl-0 = <&hsusb_otg_pins>; |
| interface-type = <0>; |
| usb-phy = <&usb2_phy>; |
| phys = <&usb2_phy>; |
| phy-names = "usb2-phy"; |
| mode = <3>; |
| power = <50>; |
| }; |
