| // SPDX-License-Identifier: GPL-2.0-only |
| /* |
| * Author: Anthoine Bourgeois <anthoine.bourgois@gmail.com> |
| */ |
| |
| #include "omap3-devkit8000-common.dtsi" |
| / { |
| aliases { |
| display0 = &lcd0; |
| display1 = &dvi0; |
| display2 = &tv0; |
| }; |
| |
| lcd0: display { |
| compatible = "panel-dpi"; |
| label = "lcd"; |
| |
| enable-gpios = <&twl_gpio 18 GPIO_ACTIVE_HIGH>; |
| |
| port { |
| lcd_in: endpoint { |
| remote-endpoint = <&dpi_lcd_out>; |
| }; |
| }; |
| }; |
| }; |
| |
| &dss { |
| port { |
| #address-cells = <1>; |
| #size-cells = <0>; |
| dpi_lcd_out: endpoint@1 { |
| reg = <1>; |
| remote-endpoint = <&lcd_in>; |
| data-lines = <24>; |
| }; |
| }; |
| }; |
| |
| &vio { |
| regulator-min-microvolt = <1800000>; |
| regulator-max-microvolt = <1800000>; |
| }; |
| |
| &mcspi2 { |
| |
| /* touch controller */ |
| ads7846@0 { |
| compatible = "ti,ads7846"; |
| vcc-supply = <&vio>; |
| |
| reg = <0>; /* CS0 */ |
| spi-max-frequency = <1500000>; |
| |
| interrupt-parent = <&gpio1>; |
| interrupts = <27 0>; /* gpio_27 */ |
| pendown-gpio = <&gpio1 27 GPIO_ACTIVE_LOW>; |
| |
| ti,x-min = /bits/ 16 <0x0>; |
| ti,x-max = /bits/ 16 <0x0fff>; |
| ti,y-min = /bits/ 16 <0x0>; |
| ti,y-max = /bits/ 16 <0x0fff>; |
| ti,x-plate-ohms = /bits/ 16 <180>; |
| ti,pressure-max = /bits/ 16 <255>; |
| ti,debounce-max = /bits/ 16 <10>; |
| ti,debounce-tol = /bits/ 16 <5>; |
| ti,debounce-rep = /bits/ 16 <1>; |
| ti,keep-vref-on = <1>; |
| ti,settle-delay-usec = /bits/ 16 <150>; |
| |
| wakeup-source; |
| }; |
| }; |
