| // SPDX-License-Identifier: GPL-2.0-only |
| /* |
| * timer-ti-32k.c - OMAP2 32k Timer Support |
| * |
| * Copyright (C) 2009 Nokia Corporation |
| * |
| * Update to use new clocksource/clockevent layers |
| * Author: Kevin Hilman, MontaVista Software, Inc. <source@mvista.com> |
| * Copyright (C) 2007 MontaVista Software, Inc. |
| * |
| * Original driver: |
| * Copyright (C) 2005 Nokia Corporation |
| * Author: Paul Mundt <paul.mundt@nokia.com> |
| * Juha Yrjölä <juha.yrjola@nokia.com> |
| * OMAP Dual-mode timer framework support by Timo Teras |
| * |
| * Some parts based off of TI's 24xx code: |
| * |
| * Copyright (C) 2004-2009 Texas Instruments, Inc. |
| * |
| * Roughly modelled after the OMAP1 MPU timer code. |
| * Added OMAP4 support - Santosh Shilimkar <santosh.shilimkar@ti.com> |
| * |
| * Copyright (C) 2015 Texas Instruments Incorporated - https://www.ti.com |
| */ |
| |
| #include <linux/clk.h> |
| #include <linux/init.h> |
| #include <linux/time.h> |
| #include <linux/sched_clock.h> |
| #include <linux/clocksource.h> |
| #include <linux/of.h> |
| #include <linux/of_address.h> |
| |
| /* |
| * 32KHz clocksource ... always available, on pretty most chips except |
| * OMAP 730 and 1510. Other timers could be used as clocksources, with |
| * higher resolution in free-running counter modes (e.g. 12 MHz xtal), |
| * but systems won't necessarily want to spend resources that way. |
| */ |
| |
| #define OMAP2_32KSYNCNT_REV_OFF 0x0 |
| #define OMAP2_32KSYNCNT_REV_SCHEME (0x3 << 30) |
| #define OMAP2_32KSYNCNT_CR_OFF_LOW 0x10 |
| #define OMAP2_32KSYNCNT_CR_OFF_HIGH 0x30 |
| |
| struct ti_32k { |
| void __iomem *base; |
| void __iomem *counter; |
| struct clocksource cs; |
| }; |
| |
| static inline struct ti_32k *to_ti_32k(struct clocksource *cs) |
| { |
| return container_of(cs, struct ti_32k, cs); |
| } |
| |
| static u64 notrace ti_32k_read_cycles(struct clocksource *cs) |
| { |
| struct ti_32k *ti = to_ti_32k(cs); |
| |
| return (u64)readl_relaxed(ti->counter); |
| } |
| |
| static struct ti_32k ti_32k_timer = { |
| .cs = { |
| .name = "32k_counter", |
| .rating = 250, |
| .read = ti_32k_read_cycles, |
| .mask = CLOCKSOURCE_MASK(32), |
| .flags = CLOCK_SOURCE_IS_CONTINUOUS, |
| }, |
| }; |
| |
| static u64 notrace omap_32k_read_sched_clock(void) |
| { |
| return ti_32k_read_cycles(&ti_32k_timer.cs); |
| } |
| |
| static void __init ti_32k_timer_enable_clock(struct device_node *np, |
| const char *name) |
| { |
| struct clk *clock; |
| int error; |
| |
| clock = of_clk_get_by_name(np->parent, name); |
| if (IS_ERR(clock)) { |
| /* Only some SoCs have a separate interface clock */ |
| if (PTR_ERR(clock) == -EINVAL && !strncmp("ick", name, 3)) |
| return; |
| |
| pr_warn("%s: could not get clock %s %li\n", |
| __func__, name, PTR_ERR(clock)); |
| return; |
| } |
| |
| error = clk_prepare_enable(clock); |
| if (error) { |
| pr_warn("%s: could not enable %s: %i\n", |
| __func__, name, error); |
| return; |
| } |
| } |
| |
| static void __init ti_32k_timer_module_init(struct device_node *np, |
| void __iomem *base) |
| { |
| void __iomem *sysc = base + 4; |
| |
| if (!of_device_is_compatible(np->parent, "ti,sysc")) |
| return; |
| |
| ti_32k_timer_enable_clock(np, "fck"); |
| ti_32k_timer_enable_clock(np, "ick"); |
| |
| /* |
| * Force idle module as wkup domain is active with MPU. |
| * No need to tag the module disabled for ti-sysc probe. |
| */ |
| writel_relaxed(0, sysc); |
| } |
| |
| static int __init ti_32k_timer_init(struct device_node *np) |
| { |
| int ret; |
| |
| ti_32k_timer.base = of_iomap(np, 0); |
| if (!ti_32k_timer.base) { |
| pr_err("Can't ioremap 32k timer base\n"); |
| return -ENXIO; |
| } |
| |
| if (!of_machine_is_compatible("ti,am43")) |
| ti_32k_timer.cs.flags |= CLOCK_SOURCE_SUSPEND_NONSTOP; |
| |
| ti_32k_timer.counter = ti_32k_timer.base; |
| ti_32k_timer_module_init(np, ti_32k_timer.base); |
| |
| /* |
| * 32k sync Counter IP register offsets vary between the highlander |
| * version and the legacy ones. |
| * |
| * The 'SCHEME' bits(30-31) of the revision register is used to identify |
| * the version. |
| */ |
| if (readl_relaxed(ti_32k_timer.base + OMAP2_32KSYNCNT_REV_OFF) & |
| OMAP2_32KSYNCNT_REV_SCHEME) |
| ti_32k_timer.counter += OMAP2_32KSYNCNT_CR_OFF_HIGH; |
| else |
| ti_32k_timer.counter += OMAP2_32KSYNCNT_CR_OFF_LOW; |
| |
| pr_info("OMAP clocksource: 32k_counter at 32768 Hz\n"); |
| |
| ret = clocksource_register_hz(&ti_32k_timer.cs, 32768); |
| if (ret) { |
| pr_err("32k_counter: can't register clocksource\n"); |
| return ret; |
| } |
| |
| sched_clock_register(omap_32k_read_sched_clock, 32, 32768); |
| |
| return 0; |
| } |
| TIMER_OF_DECLARE(ti_32k_timer, "ti,omap-counter32k", |
| ti_32k_timer_init); |