| // SPDX-License-Identifier: GPL-2.0-or-later |
| /* |
| * Copyright (C) 2015-2016 Free Electrons |
| * Copyright (C) 2015-2016 NextThing Co |
| * |
| * Maxime Ripard <maxime.ripard@free-electrons.com> |
| */ |
| |
| #include <linux/gpio/consumer.h> |
| #include <linux/module.h> |
| #include <linux/of.h> |
| #include <linux/of_graph.h> |
| #include <linux/platform_device.h> |
| #include <linux/regulator/consumer.h> |
| |
| #include <drm/drm_atomic_helper.h> |
| #include <drm/drm_bridge.h> |
| #include <drm/drm_crtc.h> |
| #include <drm/drm_edid.h> |
| #include <drm/drm_print.h> |
| #include <drm/drm_probe_helper.h> |
| |
| struct simple_bridge_info { |
| const struct drm_bridge_timings *timings; |
| unsigned int connector_type; |
| }; |
| |
| struct simple_bridge { |
| struct drm_bridge bridge; |
| struct drm_connector connector; |
| |
| const struct simple_bridge_info *info; |
| |
| struct drm_bridge *next_bridge; |
| struct regulator *vdd; |
| struct gpio_desc *enable; |
| }; |
| |
| static inline struct simple_bridge * |
| drm_bridge_to_simple_bridge(struct drm_bridge *bridge) |
| { |
| return container_of(bridge, struct simple_bridge, bridge); |
| } |
| |
| static inline struct simple_bridge * |
| drm_connector_to_simple_bridge(struct drm_connector *connector) |
| { |
| return container_of(connector, struct simple_bridge, connector); |
| } |
| |
| static int simple_bridge_get_modes(struct drm_connector *connector) |
| { |
| struct simple_bridge *sbridge = drm_connector_to_simple_bridge(connector); |
| const struct drm_edid *drm_edid; |
| int ret; |
| |
| if (sbridge->next_bridge->ops & DRM_BRIDGE_OP_EDID) { |
| drm_edid = drm_bridge_edid_read(sbridge->next_bridge, connector); |
| if (!drm_edid) |
| DRM_INFO("EDID read failed. Fallback to standard modes\n"); |
| } else { |
| drm_edid = NULL; |
| } |
| |
| drm_edid_connector_update(connector, drm_edid); |
| |
| if (!drm_edid) { |
| /* |
| * In case we cannot retrieve the EDIDs (missing or broken DDC |
| * bus from the next bridge), fallback on the XGA standards and |
| * prefer a mode pretty much anyone can handle. |
| */ |
| ret = drm_add_modes_noedid(connector, 1920, 1200); |
| drm_set_preferred_mode(connector, 1024, 768); |
| return ret; |
| } |
| |
| ret = drm_edid_connector_add_modes(connector); |
| drm_edid_free(drm_edid); |
| |
| return ret; |
| } |
| |
| static const struct drm_connector_helper_funcs simple_bridge_con_helper_funcs = { |
| .get_modes = simple_bridge_get_modes, |
| }; |
| |
| static enum drm_connector_status |
| simple_bridge_connector_detect(struct drm_connector *connector, bool force) |
| { |
| struct simple_bridge *sbridge = drm_connector_to_simple_bridge(connector); |
| |
| return drm_bridge_detect(sbridge->next_bridge); |
| } |
| |
| static const struct drm_connector_funcs simple_bridge_con_funcs = { |
| .detect = simple_bridge_connector_detect, |
| .fill_modes = drm_helper_probe_single_connector_modes, |
| .destroy = drm_connector_cleanup, |
| .reset = drm_atomic_helper_connector_reset, |
| .atomic_duplicate_state = drm_atomic_helper_connector_duplicate_state, |
| .atomic_destroy_state = drm_atomic_helper_connector_destroy_state, |
| }; |
| |
| static int simple_bridge_attach(struct drm_bridge *bridge, |
| enum drm_bridge_attach_flags flags) |
| { |
| struct simple_bridge *sbridge = drm_bridge_to_simple_bridge(bridge); |
| int ret; |
| |
| ret = drm_bridge_attach(bridge->encoder, sbridge->next_bridge, bridge, |
| DRM_BRIDGE_ATTACH_NO_CONNECTOR); |
| if (ret < 0) |
| return ret; |
| |
| if (flags & DRM_BRIDGE_ATTACH_NO_CONNECTOR) |
| return 0; |
| |
| if (!bridge->encoder) { |
| DRM_ERROR("Missing encoder\n"); |
| return -ENODEV; |
| } |
| |
| drm_connector_helper_add(&sbridge->connector, |
| &simple_bridge_con_helper_funcs); |
| ret = drm_connector_init_with_ddc(bridge->dev, &sbridge->connector, |
| &simple_bridge_con_funcs, |
| sbridge->info->connector_type, |
| sbridge->next_bridge->ddc); |
| if (ret) { |
| DRM_ERROR("Failed to initialize connector\n"); |
| return ret; |
| } |
| |
| drm_connector_attach_encoder(&sbridge->connector, bridge->encoder); |
| |
| return 0; |
| } |
| |
| static void simple_bridge_enable(struct drm_bridge *bridge) |
| { |
| struct simple_bridge *sbridge = drm_bridge_to_simple_bridge(bridge); |
| int ret; |
| |
| if (sbridge->vdd) { |
| ret = regulator_enable(sbridge->vdd); |
| if (ret) |
| DRM_ERROR("Failed to enable vdd regulator: %d\n", ret); |
| } |
| |
| gpiod_set_value_cansleep(sbridge->enable, 1); |
| } |
| |
| static void simple_bridge_disable(struct drm_bridge *bridge) |
| { |
| struct simple_bridge *sbridge = drm_bridge_to_simple_bridge(bridge); |
| |
| gpiod_set_value_cansleep(sbridge->enable, 0); |
| |
| if (sbridge->vdd) |
| regulator_disable(sbridge->vdd); |
| } |
| |
| static const struct drm_bridge_funcs simple_bridge_bridge_funcs = { |
| .attach = simple_bridge_attach, |
| .enable = simple_bridge_enable, |
| .disable = simple_bridge_disable, |
| }; |
| |
| static int simple_bridge_probe(struct platform_device *pdev) |
| { |
| struct simple_bridge *sbridge; |
| struct device_node *remote; |
| |
| sbridge = devm_kzalloc(&pdev->dev, sizeof(*sbridge), GFP_KERNEL); |
| if (!sbridge) |
| return -ENOMEM; |
| platform_set_drvdata(pdev, sbridge); |
| |
| sbridge->info = of_device_get_match_data(&pdev->dev); |
| |
| /* Get the next bridge in the pipeline. */ |
| remote = of_graph_get_remote_node(pdev->dev.of_node, 1, -1); |
| if (!remote) |
| return -EINVAL; |
| |
| sbridge->next_bridge = of_drm_find_bridge(remote); |
| of_node_put(remote); |
| |
| if (!sbridge->next_bridge) { |
| dev_dbg(&pdev->dev, "Next bridge not found, deferring probe\n"); |
| return -EPROBE_DEFER; |
| } |
| |
| /* Get the regulator and GPIO resources. */ |
| sbridge->vdd = devm_regulator_get_optional(&pdev->dev, "vdd"); |
| if (IS_ERR(sbridge->vdd)) { |
| int ret = PTR_ERR(sbridge->vdd); |
| if (ret == -EPROBE_DEFER) |
| return -EPROBE_DEFER; |
| sbridge->vdd = NULL; |
| dev_dbg(&pdev->dev, "No vdd regulator found: %d\n", ret); |
| } |
| |
| sbridge->enable = devm_gpiod_get_optional(&pdev->dev, "enable", |
| GPIOD_OUT_LOW); |
| if (IS_ERR(sbridge->enable)) |
| return dev_err_probe(&pdev->dev, PTR_ERR(sbridge->enable), |
| "Unable to retrieve enable GPIO\n"); |
| |
| /* Register the bridge. */ |
| sbridge->bridge.funcs = &simple_bridge_bridge_funcs; |
| sbridge->bridge.of_node = pdev->dev.of_node; |
| sbridge->bridge.timings = sbridge->info->timings; |
| |
| drm_bridge_add(&sbridge->bridge); |
| |
| return 0; |
| } |
| |
| static void simple_bridge_remove(struct platform_device *pdev) |
| { |
| struct simple_bridge *sbridge = platform_get_drvdata(pdev); |
| |
| drm_bridge_remove(&sbridge->bridge); |
| } |
| |
| /* |
| * We assume the ADV7123 DAC is the "default" for historical reasons |
| * Information taken from the ADV7123 datasheet, revision D. |
| * NOTE: the ADV7123EP seems to have other timings and need a new timings |
| * set if used. |
| */ |
| static const struct drm_bridge_timings default_bridge_timings = { |
| /* Timing specifications, datasheet page 7 */ |
| .input_bus_flags = DRM_BUS_FLAG_PIXDATA_SAMPLE_POSEDGE, |
| .setup_time_ps = 500, |
| .hold_time_ps = 1500, |
| }; |
| |
| /* |
| * Information taken from the THS8134, THS8134A, THS8134B datasheet named |
| * "SLVS205D", dated May 1990, revised March 2000. |
| */ |
| static const struct drm_bridge_timings ti_ths8134_bridge_timings = { |
| /* From timing diagram, datasheet page 9 */ |
| .input_bus_flags = DRM_BUS_FLAG_PIXDATA_SAMPLE_POSEDGE, |
| /* From datasheet, page 12 */ |
| .setup_time_ps = 3000, |
| /* I guess this means latched input */ |
| .hold_time_ps = 0, |
| }; |
| |
| /* |
| * Information taken from the THS8135 datasheet named "SLAS343B", dated |
| * May 2001, revised April 2013. |
| */ |
| static const struct drm_bridge_timings ti_ths8135_bridge_timings = { |
| /* From timing diagram, datasheet page 14 */ |
| .input_bus_flags = DRM_BUS_FLAG_PIXDATA_SAMPLE_POSEDGE, |
| /* From datasheet, page 16 */ |
| .setup_time_ps = 2000, |
| .hold_time_ps = 500, |
| }; |
| |
| static const struct of_device_id simple_bridge_match[] = { |
| { |
| .compatible = "dumb-vga-dac", |
| .data = &(const struct simple_bridge_info) { |
| .connector_type = DRM_MODE_CONNECTOR_VGA, |
| }, |
| }, { |
| .compatible = "adi,adv7123", |
| .data = &(const struct simple_bridge_info) { |
| .timings = &default_bridge_timings, |
| .connector_type = DRM_MODE_CONNECTOR_VGA, |
| }, |
| }, { |
| .compatible = "ti,opa362", |
| .data = &(const struct simple_bridge_info) { |
| .connector_type = DRM_MODE_CONNECTOR_Composite, |
| }, |
| }, { |
| .compatible = "ti,ths8135", |
| .data = &(const struct simple_bridge_info) { |
| .timings = &ti_ths8135_bridge_timings, |
| .connector_type = DRM_MODE_CONNECTOR_VGA, |
| }, |
| }, { |
| .compatible = "ti,ths8134", |
| .data = &(const struct simple_bridge_info) { |
| .timings = &ti_ths8134_bridge_timings, |
| .connector_type = DRM_MODE_CONNECTOR_VGA, |
| }, |
| }, |
| {}, |
| }; |
| MODULE_DEVICE_TABLE(of, simple_bridge_match); |
| |
| static struct platform_driver simple_bridge_driver = { |
| .probe = simple_bridge_probe, |
| .remove_new = simple_bridge_remove, |
| .driver = { |
| .name = "simple-bridge", |
| .of_match_table = simple_bridge_match, |
| }, |
| }; |
| module_platform_driver(simple_bridge_driver); |
| |
| MODULE_AUTHOR("Maxime Ripard <maxime.ripard@free-electrons.com>"); |
| MODULE_DESCRIPTION("Simple DRM bridge driver"); |
| MODULE_LICENSE("GPL"); |