| // SPDX-License-Identifier: GPL-2.0+ |
| /* Copyright (c) 2017 NXP. */ |
| |
| #include <linux/bitfield.h> |
| #include <linux/clk.h> |
| #include <linux/delay.h> |
| #include <linux/io.h> |
| #include <linux/module.h> |
| #include <linux/of.h> |
| #include <linux/phy/phy.h> |
| #include <linux/platform_device.h> |
| #include <linux/regulator/consumer.h> |
| |
| #define PHY_CTRL0 0x0 |
| #define PHY_CTRL0_REF_SSP_EN BIT(2) |
| #define PHY_CTRL0_FSEL_MASK GENMASK(10, 5) |
| #define PHY_CTRL0_FSEL_24M 0x2a |
| |
| #define PHY_CTRL1 0x4 |
| #define PHY_CTRL1_RESET BIT(0) |
| #define PHY_CTRL1_COMMONONN BIT(1) |
| #define PHY_CTRL1_ATERESET BIT(3) |
| #define PHY_CTRL1_VDATSRCENB0 BIT(19) |
| #define PHY_CTRL1_VDATDETENB0 BIT(20) |
| |
| #define PHY_CTRL2 0x8 |
| #define PHY_CTRL2_TXENABLEN0 BIT(8) |
| #define PHY_CTRL2_OTG_DISABLE BIT(9) |
| |
| #define PHY_CTRL3 0xc |
| #define PHY_CTRL3_COMPDISTUNE_MASK GENMASK(2, 0) |
| #define PHY_CTRL3_TXPREEMP_TUNE_MASK GENMASK(16, 15) |
| #define PHY_CTRL3_TXRISE_TUNE_MASK GENMASK(21, 20) |
| #define PHY_CTRL3_TXVREF_TUNE_MASK GENMASK(25, 22) |
| #define PHY_CTRL3_TX_VBOOST_LEVEL_MASK GENMASK(31, 29) |
| |
| #define PHY_CTRL4 0x10 |
| #define PHY_CTRL4_PCS_TX_DEEMPH_3P5DB_MASK GENMASK(20, 15) |
| |
| #define PHY_CTRL5 0x14 |
| #define PHY_CTRL5_DMPWD_OVERRIDE_SEL BIT(23) |
| #define PHY_CTRL5_DMPWD_OVERRIDE BIT(22) |
| #define PHY_CTRL5_DPPWD_OVERRIDE_SEL BIT(21) |
| #define PHY_CTRL5_DPPWD_OVERRIDE BIT(20) |
| #define PHY_CTRL5_PCS_TX_SWING_FULL_MASK GENMASK(6, 0) |
| |
| #define PHY_CTRL6 0x18 |
| #define PHY_CTRL6_ALT_CLK_EN BIT(1) |
| #define PHY_CTRL6_ALT_CLK_SEL BIT(0) |
| |
| #define PHY_TUNE_DEFAULT 0xffffffff |
| |
| struct imx8mq_usb_phy { |
| struct phy *phy; |
| struct clk *clk; |
| void __iomem *base; |
| struct regulator *vbus; |
| u32 pcs_tx_swing_full; |
| u32 pcs_tx_deemph_3p5db; |
| u32 tx_vref_tune; |
| u32 tx_rise_tune; |
| u32 tx_preemp_amp_tune; |
| u32 tx_vboost_level; |
| u32 comp_dis_tune; |
| }; |
| |
| static u32 phy_tx_vref_tune_from_property(u32 percent) |
| { |
| percent = clamp(percent, 94U, 124U); |
| |
| return DIV_ROUND_CLOSEST(percent - 94U, 2); |
| } |
| |
| static u32 phy_tx_rise_tune_from_property(u32 percent) |
| { |
| switch (percent) { |
| case 0 ... 98: |
| return 3; |
| case 99: |
| return 2; |
| case 100 ... 101: |
| return 1; |
| default: |
| return 0; |
| } |
| } |
| |
| static u32 phy_tx_preemp_amp_tune_from_property(u32 microamp) |
| { |
| microamp = min(microamp, 1800U); |
| |
| return microamp / 600; |
| } |
| |
| static u32 phy_tx_vboost_level_from_property(u32 microvolt) |
| { |
| switch (microvolt) { |
| case 0 ... 960: |
| return 0; |
| case 961 ... 1160: |
| return 2; |
| default: |
| return 3; |
| } |
| } |
| |
| static u32 phy_pcs_tx_deemph_3p5db_from_property(u32 decibel) |
| { |
| return min(decibel, 36U); |
| } |
| |
| static u32 phy_comp_dis_tune_from_property(u32 percent) |
| { |
| switch (percent) { |
| case 0 ... 92: |
| return 0; |
| case 93 ... 95: |
| return 1; |
| case 96 ... 97: |
| return 2; |
| case 98 ... 102: |
| return 3; |
| case 103 ... 105: |
| return 4; |
| case 106 ... 109: |
| return 5; |
| case 110 ... 113: |
| return 6; |
| default: |
| return 7; |
| } |
| } |
| static u32 phy_pcs_tx_swing_full_from_property(u32 percent) |
| { |
| percent = min(percent, 100U); |
| |
| return (percent * 127) / 100; |
| } |
| |
| static void imx8m_get_phy_tuning_data(struct imx8mq_usb_phy *imx_phy) |
| { |
| struct device *dev = imx_phy->phy->dev.parent; |
| |
| if (device_property_read_u32(dev, "fsl,phy-tx-vref-tune-percent", |
| &imx_phy->tx_vref_tune)) |
| imx_phy->tx_vref_tune = PHY_TUNE_DEFAULT; |
| else |
| imx_phy->tx_vref_tune = |
| phy_tx_vref_tune_from_property(imx_phy->tx_vref_tune); |
| |
| if (device_property_read_u32(dev, "fsl,phy-tx-rise-tune-percent", |
| &imx_phy->tx_rise_tune)) |
| imx_phy->tx_rise_tune = PHY_TUNE_DEFAULT; |
| else |
| imx_phy->tx_rise_tune = |
| phy_tx_rise_tune_from_property(imx_phy->tx_rise_tune); |
| |
| if (device_property_read_u32(dev, "fsl,phy-tx-preemp-amp-tune-microamp", |
| &imx_phy->tx_preemp_amp_tune)) |
| imx_phy->tx_preemp_amp_tune = PHY_TUNE_DEFAULT; |
| else |
| imx_phy->tx_preemp_amp_tune = |
| phy_tx_preemp_amp_tune_from_property(imx_phy->tx_preemp_amp_tune); |
| |
| if (device_property_read_u32(dev, "fsl,phy-tx-vboost-level-microvolt", |
| &imx_phy->tx_vboost_level)) |
| imx_phy->tx_vboost_level = PHY_TUNE_DEFAULT; |
| else |
| imx_phy->tx_vboost_level = |
| phy_tx_vboost_level_from_property(imx_phy->tx_vboost_level); |
| |
| if (device_property_read_u32(dev, "fsl,phy-comp-dis-tune-percent", |
| &imx_phy->comp_dis_tune)) |
| imx_phy->comp_dis_tune = PHY_TUNE_DEFAULT; |
| else |
| imx_phy->comp_dis_tune = |
| phy_comp_dis_tune_from_property(imx_phy->comp_dis_tune); |
| |
| if (device_property_read_u32(dev, "fsl,pcs-tx-deemph-3p5db-attenuation-db", |
| &imx_phy->pcs_tx_deemph_3p5db)) |
| imx_phy->pcs_tx_deemph_3p5db = PHY_TUNE_DEFAULT; |
| else |
| imx_phy->pcs_tx_deemph_3p5db = |
| phy_pcs_tx_deemph_3p5db_from_property(imx_phy->pcs_tx_deemph_3p5db); |
| |
| if (device_property_read_u32(dev, "fsl,phy-pcs-tx-swing-full-percent", |
| &imx_phy->pcs_tx_swing_full)) |
| imx_phy->pcs_tx_swing_full = PHY_TUNE_DEFAULT; |
| else |
| imx_phy->pcs_tx_swing_full = |
| phy_pcs_tx_swing_full_from_property(imx_phy->pcs_tx_swing_full); |
| } |
| |
| static void imx8m_phy_tune(struct imx8mq_usb_phy *imx_phy) |
| { |
| u32 value; |
| |
| /* PHY tuning */ |
| if (imx_phy->pcs_tx_deemph_3p5db != PHY_TUNE_DEFAULT) { |
| value = readl(imx_phy->base + PHY_CTRL4); |
| value &= ~PHY_CTRL4_PCS_TX_DEEMPH_3P5DB_MASK; |
| value |= FIELD_PREP(PHY_CTRL4_PCS_TX_DEEMPH_3P5DB_MASK, |
| imx_phy->pcs_tx_deemph_3p5db); |
| writel(value, imx_phy->base + PHY_CTRL4); |
| } |
| |
| if (imx_phy->pcs_tx_swing_full != PHY_TUNE_DEFAULT) { |
| value = readl(imx_phy->base + PHY_CTRL5); |
| value |= FIELD_PREP(PHY_CTRL5_PCS_TX_SWING_FULL_MASK, |
| imx_phy->pcs_tx_swing_full); |
| writel(value, imx_phy->base + PHY_CTRL5); |
| } |
| |
| if ((imx_phy->tx_vref_tune & imx_phy->tx_rise_tune & |
| imx_phy->tx_preemp_amp_tune & imx_phy->comp_dis_tune & |
| imx_phy->tx_vboost_level) == PHY_TUNE_DEFAULT) |
| /* If all are the default values, no need update. */ |
| return; |
| |
| value = readl(imx_phy->base + PHY_CTRL3); |
| |
| if (imx_phy->tx_vref_tune != PHY_TUNE_DEFAULT) { |
| value &= ~PHY_CTRL3_TXVREF_TUNE_MASK; |
| value |= FIELD_PREP(PHY_CTRL3_TXVREF_TUNE_MASK, |
| imx_phy->tx_vref_tune); |
| } |
| |
| if (imx_phy->tx_rise_tune != PHY_TUNE_DEFAULT) { |
| value &= ~PHY_CTRL3_TXRISE_TUNE_MASK; |
| value |= FIELD_PREP(PHY_CTRL3_TXRISE_TUNE_MASK, |
| imx_phy->tx_rise_tune); |
| } |
| |
| if (imx_phy->tx_preemp_amp_tune != PHY_TUNE_DEFAULT) { |
| value &= ~PHY_CTRL3_TXPREEMP_TUNE_MASK; |
| value |= FIELD_PREP(PHY_CTRL3_TXPREEMP_TUNE_MASK, |
| imx_phy->tx_preemp_amp_tune); |
| } |
| |
| if (imx_phy->comp_dis_tune != PHY_TUNE_DEFAULT) { |
| value &= ~PHY_CTRL3_COMPDISTUNE_MASK; |
| value |= FIELD_PREP(PHY_CTRL3_COMPDISTUNE_MASK, |
| imx_phy->comp_dis_tune); |
| } |
| |
| if (imx_phy->tx_vboost_level != PHY_TUNE_DEFAULT) { |
| value &= ~PHY_CTRL3_TX_VBOOST_LEVEL_MASK; |
| value |= FIELD_PREP(PHY_CTRL3_TX_VBOOST_LEVEL_MASK, |
| imx_phy->tx_vboost_level); |
| } |
| |
| writel(value, imx_phy->base + PHY_CTRL3); |
| } |
| |
| static int imx8mq_usb_phy_init(struct phy *phy) |
| { |
| struct imx8mq_usb_phy *imx_phy = phy_get_drvdata(phy); |
| u32 value; |
| |
| value = readl(imx_phy->base + PHY_CTRL1); |
| value &= ~(PHY_CTRL1_VDATSRCENB0 | PHY_CTRL1_VDATDETENB0 | |
| PHY_CTRL1_COMMONONN); |
| value |= PHY_CTRL1_RESET | PHY_CTRL1_ATERESET; |
| writel(value, imx_phy->base + PHY_CTRL1); |
| |
| value = readl(imx_phy->base + PHY_CTRL0); |
| value |= PHY_CTRL0_REF_SSP_EN; |
| writel(value, imx_phy->base + PHY_CTRL0); |
| |
| value = readl(imx_phy->base + PHY_CTRL2); |
| value |= PHY_CTRL2_TXENABLEN0; |
| writel(value, imx_phy->base + PHY_CTRL2); |
| |
| value = readl(imx_phy->base + PHY_CTRL1); |
| value &= ~(PHY_CTRL1_RESET | PHY_CTRL1_ATERESET); |
| writel(value, imx_phy->base + PHY_CTRL1); |
| |
| return 0; |
| } |
| |
| static int imx8mp_usb_phy_init(struct phy *phy) |
| { |
| struct imx8mq_usb_phy *imx_phy = phy_get_drvdata(phy); |
| u32 value; |
| |
| /* USB3.0 PHY signal fsel for 24M ref */ |
| value = readl(imx_phy->base + PHY_CTRL0); |
| value &= ~PHY_CTRL0_FSEL_MASK; |
| value |= FIELD_PREP(PHY_CTRL0_FSEL_MASK, PHY_CTRL0_FSEL_24M); |
| writel(value, imx_phy->base + PHY_CTRL0); |
| |
| /* Disable alt_clk_en and use internal MPLL clocks */ |
| value = readl(imx_phy->base + PHY_CTRL6); |
| value &= ~(PHY_CTRL6_ALT_CLK_SEL | PHY_CTRL6_ALT_CLK_EN); |
| writel(value, imx_phy->base + PHY_CTRL6); |
| |
| value = readl(imx_phy->base + PHY_CTRL1); |
| value &= ~(PHY_CTRL1_VDATSRCENB0 | PHY_CTRL1_VDATDETENB0); |
| value |= PHY_CTRL1_RESET | PHY_CTRL1_ATERESET; |
| writel(value, imx_phy->base + PHY_CTRL1); |
| |
| value = readl(imx_phy->base + PHY_CTRL0); |
| value |= PHY_CTRL0_REF_SSP_EN; |
| writel(value, imx_phy->base + PHY_CTRL0); |
| |
| value = readl(imx_phy->base + PHY_CTRL2); |
| value |= PHY_CTRL2_TXENABLEN0 | PHY_CTRL2_OTG_DISABLE; |
| writel(value, imx_phy->base + PHY_CTRL2); |
| |
| udelay(10); |
| |
| value = readl(imx_phy->base + PHY_CTRL1); |
| value &= ~(PHY_CTRL1_RESET | PHY_CTRL1_ATERESET); |
| writel(value, imx_phy->base + PHY_CTRL1); |
| |
| imx8m_phy_tune(imx_phy); |
| |
| return 0; |
| } |
| |
| static int imx8mq_phy_power_on(struct phy *phy) |
| { |
| struct imx8mq_usb_phy *imx_phy = phy_get_drvdata(phy); |
| int ret; |
| |
| ret = regulator_enable(imx_phy->vbus); |
| if (ret) |
| return ret; |
| |
| return clk_prepare_enable(imx_phy->clk); |
| } |
| |
| static int imx8mq_phy_power_off(struct phy *phy) |
| { |
| struct imx8mq_usb_phy *imx_phy = phy_get_drvdata(phy); |
| |
| clk_disable_unprepare(imx_phy->clk); |
| regulator_disable(imx_phy->vbus); |
| |
| return 0; |
| } |
| |
| static const struct phy_ops imx8mq_usb_phy_ops = { |
| .init = imx8mq_usb_phy_init, |
| .power_on = imx8mq_phy_power_on, |
| .power_off = imx8mq_phy_power_off, |
| .owner = THIS_MODULE, |
| }; |
| |
| static const struct phy_ops imx8mp_usb_phy_ops = { |
| .init = imx8mp_usb_phy_init, |
| .power_on = imx8mq_phy_power_on, |
| .power_off = imx8mq_phy_power_off, |
| .owner = THIS_MODULE, |
| }; |
| |
| static const struct of_device_id imx8mq_usb_phy_of_match[] = { |
| {.compatible = "fsl,imx8mq-usb-phy", |
| .data = &imx8mq_usb_phy_ops,}, |
| {.compatible = "fsl,imx8mp-usb-phy", |
| .data = &imx8mp_usb_phy_ops,}, |
| { } |
| }; |
| MODULE_DEVICE_TABLE(of, imx8mq_usb_phy_of_match); |
| |
| static int imx8mq_usb_phy_probe(struct platform_device *pdev) |
| { |
| struct phy_provider *phy_provider; |
| struct device *dev = &pdev->dev; |
| struct imx8mq_usb_phy *imx_phy; |
| const struct phy_ops *phy_ops; |
| |
| imx_phy = devm_kzalloc(dev, sizeof(*imx_phy), GFP_KERNEL); |
| if (!imx_phy) |
| return -ENOMEM; |
| |
| imx_phy->clk = devm_clk_get(dev, "phy"); |
| if (IS_ERR(imx_phy->clk)) { |
| dev_err(dev, "failed to get imx8mq usb phy clock\n"); |
| return PTR_ERR(imx_phy->clk); |
| } |
| |
| imx_phy->base = devm_platform_ioremap_resource(pdev, 0); |
| if (IS_ERR(imx_phy->base)) |
| return PTR_ERR(imx_phy->base); |
| |
| phy_ops = of_device_get_match_data(dev); |
| if (!phy_ops) |
| return -EINVAL; |
| |
| imx_phy->phy = devm_phy_create(dev, NULL, phy_ops); |
| if (IS_ERR(imx_phy->phy)) |
| return PTR_ERR(imx_phy->phy); |
| |
| imx_phy->vbus = devm_regulator_get(dev, "vbus"); |
| if (IS_ERR(imx_phy->vbus)) |
| return dev_err_probe(dev, PTR_ERR(imx_phy->vbus), "failed to get vbus\n"); |
| |
| phy_set_drvdata(imx_phy->phy, imx_phy); |
| |
| imx8m_get_phy_tuning_data(imx_phy); |
| |
| phy_provider = devm_of_phy_provider_register(dev, of_phy_simple_xlate); |
| |
| return PTR_ERR_OR_ZERO(phy_provider); |
| } |
| |
| static struct platform_driver imx8mq_usb_phy_driver = { |
| .probe = imx8mq_usb_phy_probe, |
| .driver = { |
| .name = "imx8mq-usb-phy", |
| .of_match_table = imx8mq_usb_phy_of_match, |
| } |
| }; |
| module_platform_driver(imx8mq_usb_phy_driver); |
| |
| MODULE_DESCRIPTION("FSL IMX8MQ USB PHY driver"); |
| MODULE_LICENSE("GPL"); |