| // SPDX-License-Identifier: GPL-2.0 |
| // |
| // Copyright (c) 2022 Collabora Ltd. |
| // Author: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com> |
| // |
| // Based on mt6323-regulator.c, |
| // Copyright (c) 2016 MediaTek Inc. |
| // |
| |
| #include <linux/module.h> |
| #include <linux/of.h> |
| #include <linux/platform_device.h> |
| #include <linux/regmap.h> |
| #include <linux/mfd/mt6397/core.h> |
| #include <linux/mfd/mt6332/registers.h> |
| #include <linux/regulator/driver.h> |
| #include <linux/regulator/machine.h> |
| #include <linux/regulator/mt6332-regulator.h> |
| #include <linux/regulator/of_regulator.h> |
| |
| #define MT6332_LDO_MODE_NORMAL 0 |
| #define MT6332_LDO_MODE_LP 1 |
| |
| /* |
| * MT6332 regulators information |
| * |
| * @desc: standard fields of regulator description. |
| * @qi: Mask for query enable signal status of regulators |
| * @vselon_reg: Register sections for hardware control mode of bucks |
| * @vselctrl_reg: Register for controlling the buck control mode. |
| * @vselctrl_mask: Mask for query buck's voltage control mode. |
| * @status_reg: Register for regulator enable status where qi unavailable |
| * @status_mask: Mask for querying regulator enable status |
| */ |
| struct mt6332_regulator_info { |
| struct regulator_desc desc; |
| u32 qi; |
| u32 vselon_reg; |
| u32 vselctrl_reg; |
| u32 vselctrl_mask; |
| u32 modeset_reg; |
| u32 modeset_mask; |
| u32 status_reg; |
| u32 status_mask; |
| }; |
| |
| #define MT6332_BUCK(match, vreg, min, max, step, volt_ranges, enreg, \ |
| vosel, vosel_mask, voselon, vosel_ctrl) \ |
| [MT6332_ID_##vreg] = { \ |
| .desc = { \ |
| .name = #vreg, \ |
| .of_match = of_match_ptr(match), \ |
| .ops = &mt6332_buck_volt_range_ops, \ |
| .type = REGULATOR_VOLTAGE, \ |
| .id = MT6332_ID_##vreg, \ |
| .owner = THIS_MODULE, \ |
| .n_voltages = (max - min)/step + 1, \ |
| .linear_ranges = volt_ranges, \ |
| .n_linear_ranges = ARRAY_SIZE(volt_ranges), \ |
| .vsel_reg = vosel, \ |
| .vsel_mask = vosel_mask, \ |
| .enable_reg = enreg, \ |
| .enable_mask = BIT(0), \ |
| }, \ |
| .qi = BIT(13), \ |
| .vselon_reg = voselon, \ |
| .vselctrl_reg = vosel_ctrl, \ |
| .vselctrl_mask = BIT(1), \ |
| .status_mask = 0, \ |
| } |
| |
| #define MT6332_LDO_LINEAR(match, vreg, min, max, step, volt_ranges, \ |
| enreg, vosel, vosel_mask, voselon, \ |
| vosel_ctrl, _modeset_reg, _modeset_mask) \ |
| [MT6332_ID_##vreg] = { \ |
| .desc = { \ |
| .name = #vreg, \ |
| .of_match = of_match_ptr(match), \ |
| .ops = &mt6332_ldo_volt_range_ops, \ |
| .type = REGULATOR_VOLTAGE, \ |
| .id = MT6332_ID_##vreg, \ |
| .owner = THIS_MODULE, \ |
| .n_voltages = (max - min)/step + 1, \ |
| .linear_ranges = volt_ranges, \ |
| .n_linear_ranges = ARRAY_SIZE(volt_ranges), \ |
| .vsel_reg = vosel, \ |
| .vsel_mask = vosel_mask, \ |
| .enable_reg = enreg, \ |
| .enable_mask = BIT(0), \ |
| }, \ |
| .qi = BIT(15), \ |
| .vselon_reg = voselon, \ |
| .vselctrl_reg = vosel_ctrl, \ |
| .vselctrl_mask = BIT(1), \ |
| .modeset_reg = _modeset_reg, \ |
| .modeset_mask = _modeset_mask, \ |
| .status_mask = 0, \ |
| } |
| |
| #define MT6332_LDO_AO(match, vreg, ldo_volt_table, vosel, vosel_mask) \ |
| [MT6332_ID_##vreg] = { \ |
| .desc = { \ |
| .name = #vreg, \ |
| .of_match = of_match_ptr(match), \ |
| .ops = &mt6332_volt_table_ao_ops, \ |
| .type = REGULATOR_VOLTAGE, \ |
| .id = MT6332_ID_##vreg, \ |
| .owner = THIS_MODULE, \ |
| .n_voltages = ARRAY_SIZE(ldo_volt_table), \ |
| .volt_table = ldo_volt_table, \ |
| .vsel_reg = vosel, \ |
| .vsel_mask = vosel_mask, \ |
| }, \ |
| } |
| |
| #define MT6332_LDO(match, vreg, ldo_volt_table, enreg, enbit, vosel, \ |
| vosel_mask, _modeset_reg, _modeset_mask) \ |
| [MT6332_ID_##vreg] = { \ |
| .desc = { \ |
| .name = #vreg, \ |
| .of_match = of_match_ptr(match), \ |
| .ops = &mt6332_volt_table_ops, \ |
| .type = REGULATOR_VOLTAGE, \ |
| .id = MT6332_ID_##vreg, \ |
| .owner = THIS_MODULE, \ |
| .n_voltages = ARRAY_SIZE(ldo_volt_table), \ |
| .volt_table = ldo_volt_table, \ |
| .vsel_reg = vosel, \ |
| .vsel_mask = vosel_mask, \ |
| .enable_reg = enreg, \ |
| .enable_mask = BIT(enbit), \ |
| }, \ |
| .qi = BIT(15), \ |
| .modeset_reg = _modeset_reg, \ |
| .modeset_mask = _modeset_mask, \ |
| .status_mask = 0, \ |
| } |
| |
| #define MT6332_REG_FIXED(match, vreg, enreg, enbit, qibit, volt, stbit) \ |
| [MT6332_ID_##vreg] = { \ |
| .desc = { \ |
| .name = #vreg, \ |
| .of_match = of_match_ptr(match), \ |
| .ops = &mt6332_volt_fixed_ops, \ |
| .type = REGULATOR_VOLTAGE, \ |
| .id = MT6332_ID_##vreg, \ |
| .owner = THIS_MODULE, \ |
| .n_voltages = 1, \ |
| .enable_reg = enreg, \ |
| .enable_mask = BIT(enbit), \ |
| .min_uV = volt, \ |
| }, \ |
| .qi = BIT(qibit), \ |
| .status_reg = MT6332_EN_STATUS0, \ |
| .status_mask = BIT(stbit), \ |
| } |
| |
| static const struct linear_range boost_volt_range[] = { |
| REGULATOR_LINEAR_RANGE(3500000, 0, 0x7f, 31250), |
| }; |
| |
| static const struct linear_range buck_volt_range[] = { |
| REGULATOR_LINEAR_RANGE(700000, 0, 0x7f, 6250), |
| }; |
| |
| static const struct linear_range buck_pa_volt_range[] = { |
| REGULATOR_LINEAR_RANGE(500000, 0, 0x3f, 50000), |
| }; |
| |
| static const struct linear_range buck_rf_volt_range[] = { |
| REGULATOR_LINEAR_RANGE(1050000, 0, 0x7f, 9375), |
| }; |
| |
| static const unsigned int ldo_volt_table1[] = { |
| 2800000, 3000000, 0, 3200000 |
| }; |
| |
| static const unsigned int ldo_volt_table2[] = { |
| 1200000, 1300000, 1400000, 1500000, 1600000, 1700000, 1800000, 1800000, |
| }; |
| |
| static int mt6332_get_status(struct regulator_dev *rdev) |
| { |
| struct mt6332_regulator_info *info = rdev_get_drvdata(rdev); |
| u32 reg, en_mask, regval; |
| int ret; |
| |
| if (info->qi > 0) { |
| reg = info->desc.enable_reg; |
| en_mask = info->qi; |
| } else { |
| reg = info->status_reg; |
| en_mask = info->status_mask; |
| } |
| |
| ret = regmap_read(rdev->regmap, reg, ®val); |
| if (ret != 0) { |
| dev_err(&rdev->dev, "Failed to get enable reg: %d\n", ret); |
| return ret; |
| } |
| |
| return (regval & en_mask) ? REGULATOR_STATUS_ON : REGULATOR_STATUS_OFF; |
| } |
| |
| static int mt6332_ldo_set_mode(struct regulator_dev *rdev, unsigned int mode) |
| { |
| struct mt6332_regulator_info *info = rdev_get_drvdata(rdev); |
| int val; |
| |
| switch (mode) { |
| case REGULATOR_MODE_STANDBY: |
| val = MT6332_LDO_MODE_LP; |
| break; |
| case REGULATOR_MODE_NORMAL: |
| val = MT6332_LDO_MODE_NORMAL; |
| break; |
| default: |
| return -EINVAL; |
| } |
| |
| val <<= ffs(info->modeset_mask) - 1; |
| |
| return regmap_update_bits(rdev->regmap, info->modeset_reg, |
| info->modeset_mask, val); |
| } |
| |
| static unsigned int mt6332_ldo_get_mode(struct regulator_dev *rdev) |
| { |
| struct mt6332_regulator_info *info = rdev_get_drvdata(rdev); |
| unsigned int val; |
| int ret; |
| |
| ret = regmap_read(rdev->regmap, info->modeset_reg, &val); |
| if (ret < 0) |
| return ret; |
| |
| val &= info->modeset_mask; |
| val >>= ffs(info->modeset_mask) - 1; |
| |
| return (val & BIT(0)) ? REGULATOR_MODE_STANDBY : REGULATOR_MODE_NORMAL; |
| } |
| |
| static const struct regulator_ops mt6332_buck_volt_range_ops = { |
| .list_voltage = regulator_list_voltage_linear_range, |
| .map_voltage = regulator_map_voltage_linear_range, |
| .set_voltage_sel = regulator_set_voltage_sel_regmap, |
| .get_voltage_sel = regulator_get_voltage_sel_regmap, |
| .set_voltage_time_sel = regulator_set_voltage_time_sel, |
| .enable = regulator_enable_regmap, |
| .disable = regulator_disable_regmap, |
| .is_enabled = regulator_is_enabled_regmap, |
| .get_status = mt6332_get_status, |
| }; |
| |
| static const struct regulator_ops mt6332_ldo_volt_range_ops = { |
| .list_voltage = regulator_list_voltage_linear_range, |
| .map_voltage = regulator_map_voltage_linear_range, |
| .set_voltage_sel = regulator_set_voltage_sel_regmap, |
| .get_voltage_sel = regulator_get_voltage_sel_regmap, |
| .set_voltage_time_sel = regulator_set_voltage_time_sel, |
| .enable = regulator_enable_regmap, |
| .disable = regulator_disable_regmap, |
| .is_enabled = regulator_is_enabled_regmap, |
| .get_status = mt6332_get_status, |
| .set_mode = mt6332_ldo_set_mode, |
| .get_mode = mt6332_ldo_get_mode, |
| }; |
| |
| static const struct regulator_ops mt6332_volt_table_ops = { |
| .list_voltage = regulator_list_voltage_table, |
| .map_voltage = regulator_map_voltage_iterate, |
| .set_voltage_sel = regulator_set_voltage_sel_regmap, |
| .get_voltage_sel = regulator_get_voltage_sel_regmap, |
| .set_voltage_time_sel = regulator_set_voltage_time_sel, |
| .enable = regulator_enable_regmap, |
| .disable = regulator_disable_regmap, |
| .is_enabled = regulator_is_enabled_regmap, |
| .get_status = mt6332_get_status, |
| .set_mode = mt6332_ldo_set_mode, |
| .get_mode = mt6332_ldo_get_mode, |
| }; |
| |
| static const struct regulator_ops mt6332_volt_table_ao_ops = { |
| .list_voltage = regulator_list_voltage_table, |
| .map_voltage = regulator_map_voltage_iterate, |
| .set_voltage_sel = regulator_set_voltage_sel_regmap, |
| .get_voltage_sel = regulator_get_voltage_sel_regmap, |
| .set_voltage_time_sel = regulator_set_voltage_time_sel, |
| }; |
| |
| static const struct regulator_ops mt6332_volt_fixed_ops = { |
| .list_voltage = regulator_list_voltage_linear, |
| .enable = regulator_enable_regmap, |
| .disable = regulator_disable_regmap, |
| .is_enabled = regulator_is_enabled_regmap, |
| .get_status = mt6332_get_status, |
| }; |
| |
| /* The array is indexed by id(MT6332_ID_XXX) */ |
| static struct mt6332_regulator_info mt6332_regulators[] = { |
| MT6332_BUCK("buck-vdram", VDRAM, 700000, 1493750, 6250, buck_volt_range, |
| MT6332_EN_STATUS0, MT6332_VDRAM_CON11, GENMASK(6, 0), |
| MT6332_VDRAM_CON12, MT6332_VDRAM_CON7), |
| MT6332_BUCK("buck-vdvfs2", VDVFS2, 700000, 1312500, 6250, buck_volt_range, |
| MT6332_VDVFS2_CON9, MT6332_VDVFS2_CON11, GENMASK(6, 0), |
| MT6332_VDVFS2_CON12, MT6332_VDVFS2_CON7), |
| MT6332_BUCK("buck-vpa", VPA, 500000, 3400000, 50000, buck_pa_volt_range, |
| MT6332_VPA_CON9, MT6332_VPA_CON11, GENMASK(5, 0), |
| MT6332_VPA_CON12, MT6332_VPA_CON7), |
| MT6332_BUCK("buck-vrf18a", VRF1, 1050000, 2240625, 9375, buck_rf_volt_range, |
| MT6332_VRF1_CON9, MT6332_VRF1_CON11, GENMASK(6, 0), |
| MT6332_VRF1_CON12, MT6332_VRF1_CON7), |
| MT6332_BUCK("buck-vrf18b", VRF2, 1050000, 2240625, 9375, buck_rf_volt_range, |
| MT6332_VRF2_CON9, MT6332_VRF2_CON11, GENMASK(6, 0), |
| MT6332_VRF2_CON12, MT6332_VRF2_CON7), |
| MT6332_BUCK("buck-vsbst", VSBST, 3500000, 7468750, 31250, boost_volt_range, |
| MT6332_VSBST_CON8, MT6332_VSBST_CON12, GENMASK(6, 0), |
| MT6332_VSBST_CON13, MT6332_VSBST_CON8), |
| MT6332_LDO("ldo-vauxb32", VAUXB32, ldo_volt_table1, MT6332_LDO_CON1, 10, |
| MT6332_LDO_CON9, GENMASK(6, 5), MT6332_LDO_CON1, GENMASK(1, 0)), |
| MT6332_REG_FIXED("ldo-vbif28", VBIF28, MT6332_LDO_CON2, 10, 0, 2800000, 1), |
| MT6332_REG_FIXED("ldo-vusb33", VUSB33, MT6332_LDO_CON3, 10, 0, 3300000, 2), |
| MT6332_LDO_LINEAR("ldo-vsram", VSRAM_DVFS2, 700000, 1493750, 6250, buck_volt_range, |
| MT6332_EN_STATUS0, MT6332_LDO_CON8, GENMASK(15, 9), |
| MT6332_VDVFS2_CON23, MT6332_VDVFS2_CON22, |
| MT6332_LDO_CON5, GENMASK(1, 0)), |
| MT6332_LDO_AO("ldo-vdig18", VDIG18, ldo_volt_table2, MT6332_LDO_CON12, GENMASK(11, 9)), |
| }; |
| |
| static int mt6332_set_buck_vosel_reg(struct platform_device *pdev) |
| { |
| struct mt6397_chip *mt6332 = dev_get_drvdata(pdev->dev.parent); |
| int i; |
| u32 regval; |
| |
| for (i = 0; i < MT6332_ID_VREG_MAX; i++) { |
| if (mt6332_regulators[i].vselctrl_reg) { |
| if (regmap_read(mt6332->regmap, |
| mt6332_regulators[i].vselctrl_reg, |
| ®val) < 0) { |
| dev_err(&pdev->dev, |
| "Failed to read buck ctrl\n"); |
| return -EIO; |
| } |
| |
| if (regval & mt6332_regulators[i].vselctrl_mask) { |
| mt6332_regulators[i].desc.vsel_reg = |
| mt6332_regulators[i].vselon_reg; |
| } |
| } |
| } |
| |
| return 0; |
| } |
| |
| static int mt6332_regulator_probe(struct platform_device *pdev) |
| { |
| struct mt6397_chip *mt6332 = dev_get_drvdata(pdev->dev.parent); |
| struct regulator_config config = {}; |
| struct regulator_dev *rdev; |
| int i; |
| u32 reg_value; |
| |
| /* Query buck controller to select activated voltage register part */ |
| if (mt6332_set_buck_vosel_reg(pdev)) |
| return -EIO; |
| |
| /* Read PMIC chip revision to update constraints and voltage table */ |
| if (regmap_read(mt6332->regmap, MT6332_HWCID, ®_value) < 0) { |
| dev_err(&pdev->dev, "Failed to read Chip ID\n"); |
| return -EIO; |
| } |
| reg_value &= GENMASK(7, 0); |
| |
| dev_info(&pdev->dev, "Chip ID = 0x%x\n", reg_value); |
| |
| /* |
| * ChipID 0x10 is "MT6332 E1", has a different voltage table and |
| * it's currently not supported in this driver. Upon detection of |
| * this ID, refuse to register the regulators, as we will wrongly |
| * interpret the VSEL for this revision, potentially overvolting |
| * some device. |
| */ |
| if (reg_value == 0x10) { |
| dev_err(&pdev->dev, "Chip version not supported. Bailing out.\n"); |
| return -EINVAL; |
| } |
| |
| for (i = 0; i < MT6332_ID_VREG_MAX; i++) { |
| config.dev = &pdev->dev; |
| config.driver_data = &mt6332_regulators[i]; |
| config.regmap = mt6332->regmap; |
| rdev = devm_regulator_register(&pdev->dev, |
| &mt6332_regulators[i].desc, &config); |
| if (IS_ERR(rdev)) { |
| dev_err(&pdev->dev, "failed to register %s\n", |
| mt6332_regulators[i].desc.name); |
| return PTR_ERR(rdev); |
| } |
| } |
| return 0; |
| } |
| |
| static const struct platform_device_id mt6332_platform_ids[] = { |
| {"mt6332-regulator", 0}, |
| { /* sentinel */ }, |
| }; |
| MODULE_DEVICE_TABLE(platform, mt6332_platform_ids); |
| |
| static struct platform_driver mt6332_regulator_driver = { |
| .driver = { |
| .name = "mt6332-regulator", |
| .probe_type = PROBE_PREFER_ASYNCHRONOUS, |
| }, |
| .probe = mt6332_regulator_probe, |
| .id_table = mt6332_platform_ids, |
| }; |
| |
| module_platform_driver(mt6332_regulator_driver); |
| |
| MODULE_AUTHOR("AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>"); |
| MODULE_DESCRIPTION("Regulator Driver for MediaTek MT6332 PMIC"); |
| MODULE_LICENSE("GPL"); |