| // SPDX-License-Identifier: GPL-2.0-only |
| |
| #include <linux/mfd/sm5703.h> |
| #include <linux/module.h> |
| #include <linux/mod_devicetable.h> |
| #include <linux/platform_device.h> |
| #include <linux/regmap.h> |
| #include <linux/regulator/driver.h> |
| #include <linux/regulator/of_regulator.h> |
| |
| enum sm5703_regulators { |
| SM5703_BUCK, |
| SM5703_LDO1, |
| SM5703_LDO2, |
| SM5703_LDO3, |
| SM5703_USBLDO1, |
| SM5703_USBLDO2, |
| SM5703_VBUS, |
| SM5703_MAX_REGULATORS, |
| }; |
| |
| static const int sm5703_ldo_voltagemap[] = { |
| 1500000, 1800000, 2600000, 2800000, 3000000, 3300000, |
| }; |
| |
| static const int sm5703_buck_voltagemap[] = { |
| 1000000, 1000000, 1000000, 1000000, |
| 1000000, 1000000, 1000000, 1000000, |
| 1000000, 1000000, 1000000, 1100000, |
| 1200000, 1300000, 1400000, 1500000, |
| 1600000, 1700000, 1800000, 1900000, |
| 2000000, 2100000, 2200000, 2300000, |
| 2400000, 2500000, 2600000, 2700000, |
| 2800000, 2900000, 3000000, 3000000, |
| }; |
| |
| #define SM5703USBLDO(_name, _id) \ |
| [SM5703_USBLDO ## _id] = { \ |
| .name = _name, \ |
| .of_match = _name, \ |
| .regulators_node = "regulators", \ |
| .type = REGULATOR_VOLTAGE, \ |
| .id = SM5703_USBLDO ## _id, \ |
| .ops = &sm5703_regulator_ops_fixed, \ |
| .n_voltages = 1, \ |
| .fixed_uV = SM5703_USBLDO_MICROVOLT, \ |
| .enable_reg = SM5703_REG_USBLDO12, \ |
| .enable_mask = SM5703_REG_EN_USBLDO ##_id, \ |
| .owner = THIS_MODULE, \ |
| } |
| |
| #define SM5703VBUS(_name) \ |
| [SM5703_VBUS] = { \ |
| .name = _name, \ |
| .of_match = _name, \ |
| .regulators_node = "regulators", \ |
| .type = REGULATOR_VOLTAGE, \ |
| .id = SM5703_VBUS, \ |
| .ops = &sm5703_regulator_ops_fixed, \ |
| .n_voltages = 1, \ |
| .fixed_uV = SM5703_VBUS_MICROVOLT, \ |
| .enable_reg = SM5703_REG_CNTL, \ |
| .enable_mask = SM5703_OPERATION_MODE_MASK, \ |
| .enable_val = SM5703_OPERATION_MODE_USB_OTG_MODE, \ |
| .disable_val = SM5703_OPERATION_MODE_CHARGING_ON, \ |
| .owner = THIS_MODULE, \ |
| } |
| |
| #define SM5703BUCK(_name) \ |
| [SM5703_BUCK] = { \ |
| .name = _name, \ |
| .of_match = _name, \ |
| .regulators_node = "regulators", \ |
| .type = REGULATOR_VOLTAGE, \ |
| .id = SM5703_BUCK, \ |
| .ops = &sm5703_regulator_ops, \ |
| .n_voltages = ARRAY_SIZE(sm5703_buck_voltagemap), \ |
| .volt_table = sm5703_buck_voltagemap, \ |
| .vsel_reg = SM5703_REG_BUCK, \ |
| .vsel_mask = SM5703_BUCK_VOLT_MASK, \ |
| .enable_reg = SM5703_REG_BUCK, \ |
| .enable_mask = SM5703_REG_EN_BUCK, \ |
| .owner = THIS_MODULE, \ |
| } |
| |
| #define SM5703LDO(_name, _id) \ |
| [SM5703_LDO ## _id] = { \ |
| .name = _name, \ |
| .of_match = _name, \ |
| .regulators_node = "regulators", \ |
| .type = REGULATOR_VOLTAGE, \ |
| .id = SM5703_LDO ## _id, \ |
| .ops = &sm5703_regulator_ops, \ |
| .n_voltages = ARRAY_SIZE(sm5703_ldo_voltagemap), \ |
| .volt_table = sm5703_ldo_voltagemap, \ |
| .vsel_reg = SM5703_REG_LDO ##_id, \ |
| .vsel_mask = SM5703_LDO_VOLT_MASK, \ |
| .enable_reg = SM5703_REG_LDO ##_id, \ |
| .enable_mask = SM5703_LDO_EN, \ |
| .owner = THIS_MODULE, \ |
| } |
| |
| static const struct regulator_ops sm5703_regulator_ops = { |
| .enable = regulator_enable_regmap, |
| .disable = regulator_disable_regmap, |
| .is_enabled = regulator_is_enabled_regmap, |
| .list_voltage = regulator_list_voltage_table, |
| .get_voltage_sel = regulator_get_voltage_sel_regmap, |
| .set_voltage_sel = regulator_set_voltage_sel_regmap, |
| }; |
| |
| static const struct regulator_ops sm5703_regulator_ops_fixed = { |
| .enable = regulator_enable_regmap, |
| .disable = regulator_disable_regmap, |
| .is_enabled = regulator_is_enabled_regmap, |
| }; |
| |
| static struct regulator_desc sm5703_regulators_desc[SM5703_MAX_REGULATORS] = { |
| SM5703BUCK("buck"), |
| SM5703LDO("ldo1", 1), |
| SM5703LDO("ldo2", 2), |
| SM5703LDO("ldo3", 3), |
| SM5703USBLDO("usbldo1", 1), |
| SM5703USBLDO("usbldo2", 2), |
| SM5703VBUS("vbus"), |
| }; |
| |
| static int sm5703_regulator_probe(struct platform_device *pdev) |
| { |
| struct device *dev = &pdev->dev; |
| struct regulator_config config = { NULL, }; |
| struct regulator_dev *rdev; |
| struct sm5703_dev *sm5703 = dev_get_drvdata(pdev->dev.parent); |
| int i; |
| |
| config.dev = dev->parent; |
| config.regmap = sm5703->regmap; |
| |
| for (i = 0; i < SM5703_MAX_REGULATORS; i++) { |
| rdev = devm_regulator_register(dev, |
| &sm5703_regulators_desc[i], |
| &config); |
| if (IS_ERR(rdev)) |
| return dev_err_probe(dev, PTR_ERR(rdev), |
| "Failed to register a regulator\n"); |
| } |
| |
| return 0; |
| } |
| |
| static const struct platform_device_id sm5703_regulator_id[] = { |
| { "sm5703-regulator", 0 }, |
| {} |
| }; |
| MODULE_DEVICE_TABLE(platform, sm5703_regulator_id); |
| |
| static struct platform_driver sm5703_regulator_driver = { |
| .driver = { |
| .name = "sm5703-regulator", |
| .probe_type = PROBE_PREFER_ASYNCHRONOUS, |
| }, |
| .probe = sm5703_regulator_probe, |
| .id_table = sm5703_regulator_id, |
| }; |
| |
| module_platform_driver(sm5703_regulator_driver); |
| |
| MODULE_DESCRIPTION("Silicon Mitus SM5703 LDO/Buck/USB regulator driver"); |
| MODULE_AUTHOR("Markuss Broks <markuss.broks@gmail.com>"); |
| MODULE_LICENSE("GPL"); |