| // SPDX-License-Identifier: GPL-2.0 |
| /* |
| * Cadence CDNSP DRD Driver. |
| * |
| * Copyright (C) 2020 Cadence. |
| * |
| * Author: Pawel Laszczak <pawell@cadence.com> |
| * |
| * Code based on Linux XHCI driver. |
| * Origin: Copyright (C) 2008 Intel Corp |
| */ |
| |
| /* |
| * Ring initialization rules: |
| * 1. Each segment is initialized to zero, except for link TRBs. |
| * 2. Ring cycle state = 0. This represents Producer Cycle State (PCS) or |
| * Consumer Cycle State (CCS), depending on ring function. |
| * 3. Enqueue pointer = dequeue pointer = address of first TRB in the segment. |
| * |
| * Ring behavior rules: |
| * 1. A ring is empty if enqueue == dequeue. This means there will always be at |
| * least one free TRB in the ring. This is useful if you want to turn that |
| * into a link TRB and expand the ring. |
| * 2. When incrementing an enqueue or dequeue pointer, if the next TRB is a |
| * link TRB, then load the pointer with the address in the link TRB. If the |
| * link TRB had its toggle bit set, you may need to update the ring cycle |
| * state (see cycle bit rules). You may have to do this multiple times |
| * until you reach a non-link TRB. |
| * 3. A ring is full if enqueue++ (for the definition of increment above) |
| * equals the dequeue pointer. |
| * |
| * Cycle bit rules: |
| * 1. When a consumer increments a dequeue pointer and encounters a toggle bit |
| * in a link TRB, it must toggle the ring cycle state. |
| * 2. When a producer increments an enqueue pointer and encounters a toggle bit |
| * in a link TRB, it must toggle the ring cycle state. |
| * |
| * Producer rules: |
| * 1. Check if ring is full before you enqueue. |
| * 2. Write the ring cycle state to the cycle bit in the TRB you're enqueuing. |
| * Update enqueue pointer between each write (which may update the ring |
| * cycle state). |
| * 3. Notify consumer. If SW is producer, it rings the doorbell for command |
| * and endpoint rings. If controller is the producer for the event ring, |
| * and it generates an interrupt according to interrupt modulation rules. |
| * |
| * Consumer rules: |
| * 1. Check if TRB belongs to you. If the cycle bit == your ring cycle state, |
| * the TRB is owned by the consumer. |
| * 2. Update dequeue pointer (which may update the ring cycle state) and |
| * continue processing TRBs until you reach a TRB which is not owned by you. |
| * 3. Notify the producer. SW is the consumer for the event ring, and it |
| * updates event ring dequeue pointer. Controller is the consumer for the |
| * command and endpoint rings; it generates events on the event ring |
| * for these. |
| */ |
| |
| #include <linux/scatterlist.h> |
| #include <linux/dma-mapping.h> |
| #include <linux/delay.h> |
| #include <linux/slab.h> |
| #include <linux/irq.h> |
| |
| #include "cdnsp-trace.h" |
| #include "cdnsp-gadget.h" |
| |
| /* |
| * Returns zero if the TRB isn't in this segment, otherwise it returns the DMA |
| * address of the TRB. |
| */ |
| dma_addr_t cdnsp_trb_virt_to_dma(struct cdnsp_segment *seg, |
| union cdnsp_trb *trb) |
| { |
| unsigned long segment_offset = trb - seg->trbs; |
| |
| if (trb < seg->trbs || segment_offset >= TRBS_PER_SEGMENT) |
| return 0; |
| |
| return seg->dma + (segment_offset * sizeof(*trb)); |
| } |
| |
| static bool cdnsp_trb_is_noop(union cdnsp_trb *trb) |
| { |
| return TRB_TYPE_NOOP_LE32(trb->generic.field[3]); |
| } |
| |
| static bool cdnsp_trb_is_link(union cdnsp_trb *trb) |
| { |
| return TRB_TYPE_LINK_LE32(trb->link.control); |
| } |
| |
| bool cdnsp_last_trb_on_seg(struct cdnsp_segment *seg, union cdnsp_trb *trb) |
| { |
| return trb == &seg->trbs[TRBS_PER_SEGMENT - 1]; |
| } |
| |
| bool cdnsp_last_trb_on_ring(struct cdnsp_ring *ring, |
| struct cdnsp_segment *seg, |
| union cdnsp_trb *trb) |
| { |
| return cdnsp_last_trb_on_seg(seg, trb) && (seg->next == ring->first_seg); |
| } |
| |
| static bool cdnsp_link_trb_toggles_cycle(union cdnsp_trb *trb) |
| { |
| return le32_to_cpu(trb->link.control) & LINK_TOGGLE; |
| } |
| |
| static void cdnsp_trb_to_noop(union cdnsp_trb *trb, u32 noop_type) |
| { |
| if (cdnsp_trb_is_link(trb)) { |
| /* Unchain chained link TRBs. */ |
| trb->link.control &= cpu_to_le32(~TRB_CHAIN); |
| } else { |
| trb->generic.field[0] = 0; |
| trb->generic.field[1] = 0; |
| trb->generic.field[2] = 0; |
| /* Preserve only the cycle bit of this TRB. */ |
| trb->generic.field[3] &= cpu_to_le32(TRB_CYCLE); |
| trb->generic.field[3] |= cpu_to_le32(TRB_TYPE(noop_type)); |
| } |
| } |
| |
| /* |
| * Updates trb to point to the next TRB in the ring, and updates seg if the next |
| * TRB is in a new segment. This does not skip over link TRBs, and it does not |
| * effect the ring dequeue or enqueue pointers. |
| */ |
| static void cdnsp_next_trb(struct cdnsp_device *pdev, |
| struct cdnsp_ring *ring, |
| struct cdnsp_segment **seg, |
| union cdnsp_trb **trb) |
| { |
| if (cdnsp_trb_is_link(*trb)) { |
| *seg = (*seg)->next; |
| *trb = ((*seg)->trbs); |
| } else { |
| (*trb)++; |
| } |
| } |
| |
| /* |
| * See Cycle bit rules. SW is the consumer for the event ring only. |
| * Don't make a ring full of link TRBs. That would be dumb and this would loop. |
| */ |
| void cdnsp_inc_deq(struct cdnsp_device *pdev, struct cdnsp_ring *ring) |
| { |
| /* event ring doesn't have link trbs, check for last trb. */ |
| if (ring->type == TYPE_EVENT) { |
| if (!cdnsp_last_trb_on_seg(ring->deq_seg, ring->dequeue)) { |
| ring->dequeue++; |
| goto out; |
| } |
| |
| if (cdnsp_last_trb_on_ring(ring, ring->deq_seg, ring->dequeue)) |
| ring->cycle_state ^= 1; |
| |
| ring->deq_seg = ring->deq_seg->next; |
| ring->dequeue = ring->deq_seg->trbs; |
| goto out; |
| } |
| |
| /* All other rings have link trbs. */ |
| if (!cdnsp_trb_is_link(ring->dequeue)) { |
| ring->dequeue++; |
| ring->num_trbs_free++; |
| } |
| while (cdnsp_trb_is_link(ring->dequeue)) { |
| ring->deq_seg = ring->deq_seg->next; |
| ring->dequeue = ring->deq_seg->trbs; |
| } |
| out: |
| trace_cdnsp_inc_deq(ring); |
| } |
| |
| /* |
| * See Cycle bit rules. SW is the consumer for the event ring only. |
| * Don't make a ring full of link TRBs. That would be dumb and this would loop. |
| * |
| * If we've just enqueued a TRB that is in the middle of a TD (meaning the |
| * chain bit is set), then set the chain bit in all the following link TRBs. |
| * If we've enqueued the last TRB in a TD, make sure the following link TRBs |
| * have their chain bit cleared (so that each Link TRB is a separate TD). |
| * |
| * @more_trbs_coming: Will you enqueue more TRBs before ringing the doorbell. |
| */ |
| static void cdnsp_inc_enq(struct cdnsp_device *pdev, |
| struct cdnsp_ring *ring, |
| bool more_trbs_coming) |
| { |
| union cdnsp_trb *next; |
| u32 chain; |
| |
| chain = le32_to_cpu(ring->enqueue->generic.field[3]) & TRB_CHAIN; |
| |
| /* If this is not event ring, there is one less usable TRB. */ |
| if (!cdnsp_trb_is_link(ring->enqueue)) |
| ring->num_trbs_free--; |
| next = ++(ring->enqueue); |
| |
| /* Update the dequeue pointer further if that was a link TRB */ |
| while (cdnsp_trb_is_link(next)) { |
| /* |
| * If the caller doesn't plan on enqueuing more TDs before |
| * ringing the doorbell, then we don't want to give the link TRB |
| * to the hardware just yet. We'll give the link TRB back in |
| * cdnsp_prepare_ring() just before we enqueue the TD at the |
| * top of the ring. |
| */ |
| if (!chain && !more_trbs_coming) |
| break; |
| |
| next->link.control &= cpu_to_le32(~TRB_CHAIN); |
| next->link.control |= cpu_to_le32(chain); |
| |
| /* Give this link TRB to the hardware */ |
| wmb(); |
| next->link.control ^= cpu_to_le32(TRB_CYCLE); |
| |
| /* Toggle the cycle bit after the last ring segment. */ |
| if (cdnsp_link_trb_toggles_cycle(next)) |
| ring->cycle_state ^= 1; |
| |
| ring->enq_seg = ring->enq_seg->next; |
| ring->enqueue = ring->enq_seg->trbs; |
| next = ring->enqueue; |
| } |
| |
| trace_cdnsp_inc_enq(ring); |
| } |
| |
| /* |
| * Check to see if there's room to enqueue num_trbs on the ring and make sure |
| * enqueue pointer will not advance into dequeue segment. |
| */ |
| static bool cdnsp_room_on_ring(struct cdnsp_device *pdev, |
| struct cdnsp_ring *ring, |
| unsigned int num_trbs) |
| { |
| int num_trbs_in_deq_seg; |
| |
| if (ring->num_trbs_free < num_trbs) |
| return false; |
| |
| if (ring->type != TYPE_COMMAND && ring->type != TYPE_EVENT) { |
| num_trbs_in_deq_seg = ring->dequeue - ring->deq_seg->trbs; |
| |
| if (ring->num_trbs_free < num_trbs + num_trbs_in_deq_seg) |
| return false; |
| } |
| |
| return true; |
| } |
| |
| /* |
| * Workaround for L1: controller has issue with resuming from L1 after |
| * setting doorbell for endpoint during L1 state. This function forces |
| * resume signal in such case. |
| */ |
| static void cdnsp_force_l0_go(struct cdnsp_device *pdev) |
| { |
| if (pdev->active_port == &pdev->usb2_port && pdev->gadget.lpm_capable) |
| cdnsp_set_link_state(pdev, &pdev->active_port->regs->portsc, XDEV_U0); |
| } |
| |
| /* Ring the doorbell after placing a command on the ring. */ |
| void cdnsp_ring_cmd_db(struct cdnsp_device *pdev) |
| { |
| writel(DB_VALUE_CMD, &pdev->dba->cmd_db); |
| } |
| |
| /* |
| * Ring the doorbell after placing a transfer on the ring. |
| * Returns true if doorbell was set, otherwise false. |
| */ |
| static bool cdnsp_ring_ep_doorbell(struct cdnsp_device *pdev, |
| struct cdnsp_ep *pep, |
| unsigned int stream_id) |
| { |
| __le32 __iomem *reg_addr = &pdev->dba->ep_db; |
| unsigned int ep_state = pep->ep_state; |
| unsigned int db_value; |
| |
| /* |
| * Don't ring the doorbell for this endpoint if endpoint is halted or |
| * disabled. |
| */ |
| if (ep_state & EP_HALTED || !(ep_state & EP_ENABLED)) |
| return false; |
| |
| /* For stream capable endpoints driver can ring doorbell only twice. */ |
| if (pep->ep_state & EP_HAS_STREAMS) { |
| if (pep->stream_info.drbls_count >= 2) |
| return false; |
| |
| pep->stream_info.drbls_count++; |
| } |
| |
| pep->ep_state &= ~EP_STOPPED; |
| |
| if (pep->idx == 0 && pdev->ep0_stage == CDNSP_DATA_STAGE && |
| !pdev->ep0_expect_in) |
| db_value = DB_VALUE_EP0_OUT(pep->idx, stream_id); |
| else |
| db_value = DB_VALUE(pep->idx, stream_id); |
| |
| trace_cdnsp_tr_drbl(pep, stream_id); |
| |
| writel(db_value, reg_addr); |
| |
| cdnsp_force_l0_go(pdev); |
| |
| /* Doorbell was set. */ |
| return true; |
| } |
| |
| /* |
| * Get the right ring for the given pep and stream_id. |
| * If the endpoint supports streams, boundary check the USB request's stream ID. |
| * If the endpoint doesn't support streams, return the singular endpoint ring. |
| */ |
| static struct cdnsp_ring *cdnsp_get_transfer_ring(struct cdnsp_device *pdev, |
| struct cdnsp_ep *pep, |
| unsigned int stream_id) |
| { |
| if (!(pep->ep_state & EP_HAS_STREAMS)) |
| return pep->ring; |
| |
| if (stream_id == 0 || stream_id >= pep->stream_info.num_streams) { |
| dev_err(pdev->dev, "ERR: %s ring doesn't exist for SID: %d.\n", |
| pep->name, stream_id); |
| return NULL; |
| } |
| |
| return pep->stream_info.stream_rings[stream_id]; |
| } |
| |
| static struct cdnsp_ring * |
| cdnsp_request_to_transfer_ring(struct cdnsp_device *pdev, |
| struct cdnsp_request *preq) |
| { |
| return cdnsp_get_transfer_ring(pdev, preq->pep, |
| preq->request.stream_id); |
| } |
| |
| /* Ring the doorbell for any rings with pending requests. */ |
| void cdnsp_ring_doorbell_for_active_rings(struct cdnsp_device *pdev, |
| struct cdnsp_ep *pep) |
| { |
| struct cdnsp_stream_info *stream_info; |
| unsigned int stream_id; |
| int ret; |
| |
| if (pep->ep_state & EP_DIS_IN_RROGRESS) |
| return; |
| |
| /* A ring has pending Request if its TD list is not empty. */ |
| if (!(pep->ep_state & EP_HAS_STREAMS) && pep->number) { |
| if (pep->ring && !list_empty(&pep->ring->td_list)) |
| cdnsp_ring_ep_doorbell(pdev, pep, 0); |
| return; |
| } |
| |
| stream_info = &pep->stream_info; |
| |
| for (stream_id = 1; stream_id < stream_info->num_streams; stream_id++) { |
| struct cdnsp_td *td, *td_temp; |
| struct cdnsp_ring *ep_ring; |
| |
| if (stream_info->drbls_count >= 2) |
| return; |
| |
| ep_ring = cdnsp_get_transfer_ring(pdev, pep, stream_id); |
| if (!ep_ring) |
| continue; |
| |
| if (!ep_ring->stream_active || ep_ring->stream_rejected) |
| continue; |
| |
| list_for_each_entry_safe(td, td_temp, &ep_ring->td_list, |
| td_list) { |
| if (td->drbl) |
| continue; |
| |
| ret = cdnsp_ring_ep_doorbell(pdev, pep, stream_id); |
| if (ret) |
| td->drbl = 1; |
| } |
| } |
| } |
| |
| /* |
| * Get the hw dequeue pointer controller stopped on, either directly from the |
| * endpoint context, or if streams are in use from the stream context. |
| * The returned hw_dequeue contains the lowest four bits with cycle state |
| * and possible stream context type. |
| */ |
| static u64 cdnsp_get_hw_deq(struct cdnsp_device *pdev, |
| unsigned int ep_index, |
| unsigned int stream_id) |
| { |
| struct cdnsp_stream_ctx *st_ctx; |
| struct cdnsp_ep *pep; |
| |
| pep = &pdev->eps[stream_id]; |
| |
| if (pep->ep_state & EP_HAS_STREAMS) { |
| st_ctx = &pep->stream_info.stream_ctx_array[stream_id]; |
| return le64_to_cpu(st_ctx->stream_ring); |
| } |
| |
| return le64_to_cpu(pep->out_ctx->deq); |
| } |
| |
| /* |
| * Move the controller endpoint ring dequeue pointer past cur_td. |
| * Record the new state of the controller endpoint ring dequeue segment, |
| * dequeue pointer, and new consumer cycle state in state. |
| * Update internal representation of the ring's dequeue pointer. |
| * |
| * We do this in three jumps: |
| * - First we update our new ring state to be the same as when the |
| * controller stopped. |
| * - Then we traverse the ring to find the segment that contains |
| * the last TRB in the TD. We toggle the controller new cycle state |
| * when we pass any link TRBs with the toggle cycle bit set. |
| * - Finally we move the dequeue state one TRB further, toggling the cycle bit |
| * if we've moved it past a link TRB with the toggle cycle bit set. |
| */ |
| static void cdnsp_find_new_dequeue_state(struct cdnsp_device *pdev, |
| struct cdnsp_ep *pep, |
| unsigned int stream_id, |
| struct cdnsp_td *cur_td, |
| struct cdnsp_dequeue_state *state) |
| { |
| bool td_last_trb_found = false; |
| struct cdnsp_segment *new_seg; |
| struct cdnsp_ring *ep_ring; |
| union cdnsp_trb *new_deq; |
| bool cycle_found = false; |
| u64 hw_dequeue; |
| |
| ep_ring = cdnsp_get_transfer_ring(pdev, pep, stream_id); |
| if (!ep_ring) |
| return; |
| |
| /* |
| * Dig out the cycle state saved by the controller during the |
| * stop endpoint command. |
| */ |
| hw_dequeue = cdnsp_get_hw_deq(pdev, pep->idx, stream_id); |
| new_seg = ep_ring->deq_seg; |
| new_deq = ep_ring->dequeue; |
| state->new_cycle_state = hw_dequeue & 0x1; |
| state->stream_id = stream_id; |
| |
| /* |
| * We want to find the pointer, segment and cycle state of the new trb |
| * (the one after current TD's last_trb). We know the cycle state at |
| * hw_dequeue, so walk the ring until both hw_dequeue and last_trb are |
| * found. |
| */ |
| do { |
| if (!cycle_found && cdnsp_trb_virt_to_dma(new_seg, new_deq) |
| == (dma_addr_t)(hw_dequeue & ~0xf)) { |
| cycle_found = true; |
| |
| if (td_last_trb_found) |
| break; |
| } |
| |
| if (new_deq == cur_td->last_trb) |
| td_last_trb_found = true; |
| |
| if (cycle_found && cdnsp_trb_is_link(new_deq) && |
| cdnsp_link_trb_toggles_cycle(new_deq)) |
| state->new_cycle_state ^= 0x1; |
| |
| cdnsp_next_trb(pdev, ep_ring, &new_seg, &new_deq); |
| |
| /* Search wrapped around, bail out. */ |
| if (new_deq == pep->ring->dequeue) { |
| dev_err(pdev->dev, |
| "Error: Failed finding new dequeue state\n"); |
| state->new_deq_seg = NULL; |
| state->new_deq_ptr = NULL; |
| return; |
| } |
| |
| } while (!cycle_found || !td_last_trb_found); |
| |
| state->new_deq_seg = new_seg; |
| state->new_deq_ptr = new_deq; |
| |
| trace_cdnsp_new_deq_state(state); |
| } |
| |
| /* |
| * flip_cycle means flip the cycle bit of all but the first and last TRB. |
| * (The last TRB actually points to the ring enqueue pointer, which is not part |
| * of this TD.) This is used to remove partially enqueued isoc TDs from a ring. |
| */ |
| static void cdnsp_td_to_noop(struct cdnsp_device *pdev, |
| struct cdnsp_ring *ep_ring, |
| struct cdnsp_td *td, |
| bool flip_cycle) |
| { |
| struct cdnsp_segment *seg = td->start_seg; |
| union cdnsp_trb *trb = td->first_trb; |
| |
| while (1) { |
| cdnsp_trb_to_noop(trb, TRB_TR_NOOP); |
| |
| /* flip cycle if asked to */ |
| if (flip_cycle && trb != td->first_trb && trb != td->last_trb) |
| trb->generic.field[3] ^= cpu_to_le32(TRB_CYCLE); |
| |
| if (trb == td->last_trb) |
| break; |
| |
| cdnsp_next_trb(pdev, ep_ring, &seg, &trb); |
| } |
| } |
| |
| /* |
| * This TD is defined by the TRBs starting at start_trb in start_seg and ending |
| * at end_trb, which may be in another segment. If the suspect DMA address is a |
| * TRB in this TD, this function returns that TRB's segment. Otherwise it |
| * returns 0. |
| */ |
| static struct cdnsp_segment *cdnsp_trb_in_td(struct cdnsp_device *pdev, |
| struct cdnsp_segment *start_seg, |
| union cdnsp_trb *start_trb, |
| union cdnsp_trb *end_trb, |
| dma_addr_t suspect_dma) |
| { |
| struct cdnsp_segment *cur_seg; |
| union cdnsp_trb *temp_trb; |
| dma_addr_t end_seg_dma; |
| dma_addr_t end_trb_dma; |
| dma_addr_t start_dma; |
| |
| start_dma = cdnsp_trb_virt_to_dma(start_seg, start_trb); |
| cur_seg = start_seg; |
| |
| do { |
| if (start_dma == 0) |
| return NULL; |
| |
| temp_trb = &cur_seg->trbs[TRBS_PER_SEGMENT - 1]; |
| /* We may get an event for a Link TRB in the middle of a TD */ |
| end_seg_dma = cdnsp_trb_virt_to_dma(cur_seg, temp_trb); |
| /* If the end TRB isn't in this segment, this is set to 0 */ |
| end_trb_dma = cdnsp_trb_virt_to_dma(cur_seg, end_trb); |
| |
| trace_cdnsp_looking_trb_in_td(suspect_dma, start_dma, |
| end_trb_dma, cur_seg->dma, |
| end_seg_dma); |
| |
| if (end_trb_dma > 0) { |
| /* |
| * The end TRB is in this segment, so suspect should |
| * be here |
| */ |
| if (start_dma <= end_trb_dma) { |
| if (suspect_dma >= start_dma && |
| suspect_dma <= end_trb_dma) { |
| return cur_seg; |
| } |
| } else { |
| /* |
| * Case for one segment with a |
| * TD wrapped around to the top |
| */ |
| if ((suspect_dma >= start_dma && |
| suspect_dma <= end_seg_dma) || |
| (suspect_dma >= cur_seg->dma && |
| suspect_dma <= end_trb_dma)) { |
| return cur_seg; |
| } |
| } |
| |
| return NULL; |
| } |
| |
| /* Might still be somewhere in this segment */ |
| if (suspect_dma >= start_dma && suspect_dma <= end_seg_dma) |
| return cur_seg; |
| |
| cur_seg = cur_seg->next; |
| start_dma = cdnsp_trb_virt_to_dma(cur_seg, &cur_seg->trbs[0]); |
| } while (cur_seg != start_seg); |
| |
| return NULL; |
| } |
| |
| static void cdnsp_unmap_td_bounce_buffer(struct cdnsp_device *pdev, |
| struct cdnsp_ring *ring, |
| struct cdnsp_td *td) |
| { |
| struct cdnsp_segment *seg = td->bounce_seg; |
| struct cdnsp_request *preq; |
| size_t len; |
| |
| if (!seg) |
| return; |
| |
| preq = td->preq; |
| |
| trace_cdnsp_bounce_unmap(td->preq, seg->bounce_len, seg->bounce_offs, |
| seg->bounce_dma, 0); |
| |
| if (!preq->direction) { |
| dma_unmap_single(pdev->dev, seg->bounce_dma, |
| ring->bounce_buf_len, DMA_TO_DEVICE); |
| return; |
| } |
| |
| dma_unmap_single(pdev->dev, seg->bounce_dma, ring->bounce_buf_len, |
| DMA_FROM_DEVICE); |
| |
| /* For in transfers we need to copy the data from bounce to sg */ |
| len = sg_pcopy_from_buffer(preq->request.sg, preq->request.num_sgs, |
| seg->bounce_buf, seg->bounce_len, |
| seg->bounce_offs); |
| if (len != seg->bounce_len) |
| dev_warn(pdev->dev, "WARN Wrong bounce buffer read length: %zu != %d\n", |
| len, seg->bounce_len); |
| |
| seg->bounce_len = 0; |
| seg->bounce_offs = 0; |
| } |
| |
| static int cdnsp_cmd_set_deq(struct cdnsp_device *pdev, |
| struct cdnsp_ep *pep, |
| struct cdnsp_dequeue_state *deq_state) |
| { |
| struct cdnsp_ring *ep_ring; |
| int ret; |
| |
| if (!deq_state->new_deq_ptr || !deq_state->new_deq_seg) { |
| cdnsp_ring_doorbell_for_active_rings(pdev, pep); |
| return 0; |
| } |
| |
| cdnsp_queue_new_dequeue_state(pdev, pep, deq_state); |
| cdnsp_ring_cmd_db(pdev); |
| ret = cdnsp_wait_for_cmd_compl(pdev); |
| |
| trace_cdnsp_handle_cmd_set_deq(cdnsp_get_slot_ctx(&pdev->out_ctx)); |
| trace_cdnsp_handle_cmd_set_deq_ep(pep->out_ctx); |
| |
| /* |
| * Update the ring's dequeue segment and dequeue pointer |
| * to reflect the new position. |
| */ |
| ep_ring = cdnsp_get_transfer_ring(pdev, pep, deq_state->stream_id); |
| |
| if (cdnsp_trb_is_link(ep_ring->dequeue)) { |
| ep_ring->deq_seg = ep_ring->deq_seg->next; |
| ep_ring->dequeue = ep_ring->deq_seg->trbs; |
| } |
| |
| while (ep_ring->dequeue != deq_state->new_deq_ptr) { |
| ep_ring->num_trbs_free++; |
| ep_ring->dequeue++; |
| |
| if (cdnsp_trb_is_link(ep_ring->dequeue)) { |
| if (ep_ring->dequeue == deq_state->new_deq_ptr) |
| break; |
| |
| ep_ring->deq_seg = ep_ring->deq_seg->next; |
| ep_ring->dequeue = ep_ring->deq_seg->trbs; |
| } |
| } |
| |
| /* |
| * Probably there was TIMEOUT during handling Set Dequeue Pointer |
| * command. It's critical error and controller will be stopped. |
| */ |
| if (ret) |
| return -ESHUTDOWN; |
| |
| /* Restart any rings with pending requests */ |
| cdnsp_ring_doorbell_for_active_rings(pdev, pep); |
| |
| return 0; |
| } |
| |
| int cdnsp_remove_request(struct cdnsp_device *pdev, |
| struct cdnsp_request *preq, |
| struct cdnsp_ep *pep) |
| { |
| struct cdnsp_dequeue_state deq_state; |
| struct cdnsp_td *cur_td = NULL; |
| struct cdnsp_ring *ep_ring; |
| struct cdnsp_segment *seg; |
| int status = -ECONNRESET; |
| int ret = 0; |
| u64 hw_deq; |
| |
| memset(&deq_state, 0, sizeof(deq_state)); |
| |
| trace_cdnsp_remove_request(pep->out_ctx); |
| trace_cdnsp_remove_request_td(preq); |
| |
| cur_td = &preq->td; |
| ep_ring = cdnsp_request_to_transfer_ring(pdev, preq); |
| |
| /* |
| * If we stopped on the TD we need to cancel, then we have to |
| * move the controller endpoint ring dequeue pointer past |
| * this TD. |
| */ |
| hw_deq = cdnsp_get_hw_deq(pdev, pep->idx, preq->request.stream_id); |
| hw_deq &= ~0xf; |
| |
| seg = cdnsp_trb_in_td(pdev, cur_td->start_seg, cur_td->first_trb, |
| cur_td->last_trb, hw_deq); |
| |
| if (seg && (pep->ep_state & EP_ENABLED)) |
| cdnsp_find_new_dequeue_state(pdev, pep, preq->request.stream_id, |
| cur_td, &deq_state); |
| else |
| cdnsp_td_to_noop(pdev, ep_ring, cur_td, false); |
| |
| /* |
| * The event handler won't see a completion for this TD anymore, |
| * so remove it from the endpoint ring's TD list. |
| */ |
| list_del_init(&cur_td->td_list); |
| ep_ring->num_tds--; |
| pep->stream_info.td_count--; |
| |
| /* |
| * During disconnecting all endpoint will be disabled so we don't |
| * have to worry about updating dequeue pointer. |
| */ |
| if (pdev->cdnsp_state & CDNSP_STATE_DISCONNECT_PENDING) { |
| status = -ESHUTDOWN; |
| ret = cdnsp_cmd_set_deq(pdev, pep, &deq_state); |
| } |
| |
| cdnsp_unmap_td_bounce_buffer(pdev, ep_ring, cur_td); |
| cdnsp_gadget_giveback(pep, cur_td->preq, status); |
| |
| return ret; |
| } |
| |
| static int cdnsp_update_port_id(struct cdnsp_device *pdev, u32 port_id) |
| { |
| struct cdnsp_port *port = pdev->active_port; |
| u8 old_port = 0; |
| |
| if (port && port->port_num == port_id) |
| return 0; |
| |
| if (port) |
| old_port = port->port_num; |
| |
| if (port_id == pdev->usb2_port.port_num) { |
| port = &pdev->usb2_port; |
| } else if (port_id == pdev->usb3_port.port_num) { |
| port = &pdev->usb3_port; |
| } else { |
| dev_err(pdev->dev, "Port event with invalid port ID %d\n", |
| port_id); |
| return -EINVAL; |
| } |
| |
| if (port_id != old_port) { |
| cdnsp_disable_slot(pdev); |
| pdev->active_port = port; |
| cdnsp_enable_slot(pdev); |
| } |
| |
| if (port_id == pdev->usb2_port.port_num) |
| cdnsp_set_usb2_hardware_lpm(pdev, NULL, 1); |
| else |
| writel(PORT_U1_TIMEOUT(1) | PORT_U2_TIMEOUT(1), |
| &pdev->usb3_port.regs->portpmsc); |
| |
| return 0; |
| } |
| |
| static void cdnsp_handle_port_status(struct cdnsp_device *pdev, |
| union cdnsp_trb *event) |
| { |
| struct cdnsp_port_regs __iomem *port_regs; |
| u32 portsc, cmd_regs; |
| bool port2 = false; |
| u32 link_state; |
| u32 port_id; |
| |
| /* Port status change events always have a successful completion code */ |
| if (GET_COMP_CODE(le32_to_cpu(event->generic.field[2])) != COMP_SUCCESS) |
| dev_err(pdev->dev, "ERR: incorrect PSC event\n"); |
| |
| port_id = GET_PORT_ID(le32_to_cpu(event->generic.field[0])); |
| |
| if (cdnsp_update_port_id(pdev, port_id)) |
| goto cleanup; |
| |
| port_regs = pdev->active_port->regs; |
| |
| if (port_id == pdev->usb2_port.port_num) |
| port2 = true; |
| |
| new_event: |
| portsc = readl(&port_regs->portsc); |
| writel(cdnsp_port_state_to_neutral(portsc) | |
| (portsc & PORT_CHANGE_BITS), &port_regs->portsc); |
| |
| trace_cdnsp_handle_port_status(pdev->active_port->port_num, portsc); |
| |
| pdev->gadget.speed = cdnsp_port_speed(portsc); |
| link_state = portsc & PORT_PLS_MASK; |
| |
| /* Port Link State change detected. */ |
| if ((portsc & PORT_PLC)) { |
| if (!(pdev->cdnsp_state & CDNSP_WAKEUP_PENDING) && |
| link_state == XDEV_RESUME) { |
| cmd_regs = readl(&pdev->op_regs->command); |
| if (!(cmd_regs & CMD_R_S)) |
| goto cleanup; |
| |
| if (DEV_SUPERSPEED_ANY(portsc)) { |
| cdnsp_set_link_state(pdev, &port_regs->portsc, |
| XDEV_U0); |
| |
| cdnsp_resume_gadget(pdev); |
| } |
| } |
| |
| if ((pdev->cdnsp_state & CDNSP_WAKEUP_PENDING) && |
| link_state == XDEV_U0) { |
| pdev->cdnsp_state &= ~CDNSP_WAKEUP_PENDING; |
| |
| cdnsp_force_header_wakeup(pdev, 1); |
| cdnsp_ring_cmd_db(pdev); |
| cdnsp_wait_for_cmd_compl(pdev); |
| } |
| |
| if (link_state == XDEV_U0 && pdev->link_state == XDEV_U3 && |
| !DEV_SUPERSPEED_ANY(portsc)) |
| cdnsp_resume_gadget(pdev); |
| |
| if (link_state == XDEV_U3 && pdev->link_state != XDEV_U3) |
| cdnsp_suspend_gadget(pdev); |
| |
| pdev->link_state = link_state; |
| } |
| |
| if (portsc & PORT_CSC) { |
| /* Detach device. */ |
| if (pdev->gadget.connected && !(portsc & PORT_CONNECT)) |
| cdnsp_disconnect_gadget(pdev); |
| |
| /* Attach device. */ |
| if (portsc & PORT_CONNECT) { |
| if (!port2) |
| cdnsp_irq_reset(pdev); |
| |
| usb_gadget_set_state(&pdev->gadget, USB_STATE_ATTACHED); |
| } |
| } |
| |
| /* Port reset. */ |
| if ((portsc & (PORT_RC | PORT_WRC)) && (portsc & PORT_CONNECT)) { |
| cdnsp_irq_reset(pdev); |
| pdev->u1_allowed = 0; |
| pdev->u2_allowed = 0; |
| pdev->may_wakeup = 0; |
| } |
| |
| if (portsc & PORT_CEC) |
| dev_err(pdev->dev, "Port Over Current detected\n"); |
| |
| if (portsc & PORT_CEC) |
| dev_err(pdev->dev, "Port Configure Error detected\n"); |
| |
| if (readl(&port_regs->portsc) & PORT_CHANGE_BITS) |
| goto new_event; |
| |
| cleanup: |
| cdnsp_inc_deq(pdev, pdev->event_ring); |
| } |
| |
| static void cdnsp_td_cleanup(struct cdnsp_device *pdev, |
| struct cdnsp_td *td, |
| struct cdnsp_ring *ep_ring, |
| int *status) |
| { |
| struct cdnsp_request *preq = td->preq; |
| |
| /* if a bounce buffer was used to align this td then unmap it */ |
| cdnsp_unmap_td_bounce_buffer(pdev, ep_ring, td); |
| |
| /* |
| * If the controller said we transferred more data than the buffer |
| * length, Play it safe and say we didn't transfer anything. |
| */ |
| if (preq->request.actual > preq->request.length) { |
| preq->request.actual = 0; |
| *status = 0; |
| } |
| |
| list_del_init(&td->td_list); |
| ep_ring->num_tds--; |
| preq->pep->stream_info.td_count--; |
| |
| cdnsp_gadget_giveback(preq->pep, preq, *status); |
| } |
| |
| static void cdnsp_finish_td(struct cdnsp_device *pdev, |
| struct cdnsp_td *td, |
| struct cdnsp_transfer_event *event, |
| struct cdnsp_ep *ep, |
| int *status) |
| { |
| struct cdnsp_ring *ep_ring; |
| u32 trb_comp_code; |
| |
| ep_ring = cdnsp_dma_to_transfer_ring(ep, le64_to_cpu(event->buffer)); |
| trb_comp_code = GET_COMP_CODE(le32_to_cpu(event->transfer_len)); |
| |
| if (trb_comp_code == COMP_STOPPED_LENGTH_INVALID || |
| trb_comp_code == COMP_STOPPED || |
| trb_comp_code == COMP_STOPPED_SHORT_PACKET) { |
| /* |
| * The Endpoint Stop Command completion will take care of any |
| * stopped TDs. A stopped TD may be restarted, so don't update |
| * the ring dequeue pointer or take this TD off any lists yet. |
| */ |
| return; |
| } |
| |
| /* Update ring dequeue pointer */ |
| while (ep_ring->dequeue != td->last_trb) |
| cdnsp_inc_deq(pdev, ep_ring); |
| |
| cdnsp_inc_deq(pdev, ep_ring); |
| |
| cdnsp_td_cleanup(pdev, td, ep_ring, status); |
| } |
| |
| /* sum trb lengths from ring dequeue up to stop_trb, _excluding_ stop_trb */ |
| static int cdnsp_sum_trb_lengths(struct cdnsp_device *pdev, |
| struct cdnsp_ring *ring, |
| union cdnsp_trb *stop_trb) |
| { |
| struct cdnsp_segment *seg = ring->deq_seg; |
| union cdnsp_trb *trb = ring->dequeue; |
| u32 sum; |
| |
| for (sum = 0; trb != stop_trb; cdnsp_next_trb(pdev, ring, &seg, &trb)) { |
| if (!cdnsp_trb_is_noop(trb) && !cdnsp_trb_is_link(trb)) |
| sum += TRB_LEN(le32_to_cpu(trb->generic.field[2])); |
| } |
| return sum; |
| } |
| |
| static int cdnsp_giveback_first_trb(struct cdnsp_device *pdev, |
| struct cdnsp_ep *pep, |
| unsigned int stream_id, |
| int start_cycle, |
| struct cdnsp_generic_trb *start_trb) |
| { |
| /* |
| * Pass all the TRBs to the hardware at once and make sure this write |
| * isn't reordered. |
| */ |
| wmb(); |
| |
| if (start_cycle) |
| start_trb->field[3] |= cpu_to_le32(start_cycle); |
| else |
| start_trb->field[3] &= cpu_to_le32(~TRB_CYCLE); |
| |
| if ((pep->ep_state & EP_HAS_STREAMS) && |
| !pep->stream_info.first_prime_det) { |
| trace_cdnsp_wait_for_prime(pep, stream_id); |
| return 0; |
| } |
| |
| return cdnsp_ring_ep_doorbell(pdev, pep, stream_id); |
| } |
| |
| /* |
| * Process control tds, update USB request status and actual_length. |
| */ |
| static void cdnsp_process_ctrl_td(struct cdnsp_device *pdev, |
| struct cdnsp_td *td, |
| union cdnsp_trb *event_trb, |
| struct cdnsp_transfer_event *event, |
| struct cdnsp_ep *pep, |
| int *status) |
| { |
| struct cdnsp_ring *ep_ring; |
| u32 remaining; |
| u32 trb_type; |
| |
| trb_type = TRB_FIELD_TO_TYPE(le32_to_cpu(event_trb->generic.field[3])); |
| ep_ring = cdnsp_dma_to_transfer_ring(pep, le64_to_cpu(event->buffer)); |
| remaining = EVENT_TRB_LEN(le32_to_cpu(event->transfer_len)); |
| |
| /* |
| * if on data stage then update the actual_length of the USB |
| * request and flag it as set, so it won't be overwritten in the event |
| * for the last TRB. |
| */ |
| if (trb_type == TRB_DATA) { |
| td->request_length_set = true; |
| td->preq->request.actual = td->preq->request.length - remaining; |
| } |
| |
| /* at status stage */ |
| if (!td->request_length_set) |
| td->preq->request.actual = td->preq->request.length; |
| |
| if (pdev->ep0_stage == CDNSP_DATA_STAGE && pep->number == 0 && |
| pdev->three_stage_setup) { |
| td = list_entry(ep_ring->td_list.next, struct cdnsp_td, |
| td_list); |
| pdev->ep0_stage = CDNSP_STATUS_STAGE; |
| |
| cdnsp_giveback_first_trb(pdev, pep, 0, ep_ring->cycle_state, |
| &td->last_trb->generic); |
| return; |
| } |
| |
| *status = 0; |
| |
| cdnsp_finish_td(pdev, td, event, pep, status); |
| } |
| |
| /* |
| * Process isochronous tds, update usb request status and actual_length. |
| */ |
| static void cdnsp_process_isoc_td(struct cdnsp_device *pdev, |
| struct cdnsp_td *td, |
| union cdnsp_trb *ep_trb, |
| struct cdnsp_transfer_event *event, |
| struct cdnsp_ep *pep, |
| int status) |
| { |
| struct cdnsp_request *preq = td->preq; |
| u32 remaining, requested, ep_trb_len; |
| bool sum_trbs_for_length = false; |
| struct cdnsp_ring *ep_ring; |
| u32 trb_comp_code; |
| u32 td_length; |
| |
| ep_ring = cdnsp_dma_to_transfer_ring(pep, le64_to_cpu(event->buffer)); |
| trb_comp_code = GET_COMP_CODE(le32_to_cpu(event->transfer_len)); |
| remaining = EVENT_TRB_LEN(le32_to_cpu(event->transfer_len)); |
| ep_trb_len = TRB_LEN(le32_to_cpu(ep_trb->generic.field[2])); |
| |
| requested = preq->request.length; |
| |
| /* handle completion code */ |
| switch (trb_comp_code) { |
| case COMP_SUCCESS: |
| preq->request.status = 0; |
| break; |
| case COMP_SHORT_PACKET: |
| preq->request.status = 0; |
| sum_trbs_for_length = true; |
| break; |
| case COMP_ISOCH_BUFFER_OVERRUN: |
| case COMP_BABBLE_DETECTED_ERROR: |
| preq->request.status = -EOVERFLOW; |
| break; |
| case COMP_STOPPED: |
| sum_trbs_for_length = true; |
| break; |
| case COMP_STOPPED_SHORT_PACKET: |
| /* field normally containing residue now contains transferred */ |
| preq->request.status = 0; |
| requested = remaining; |
| break; |
| case COMP_STOPPED_LENGTH_INVALID: |
| requested = 0; |
| remaining = 0; |
| break; |
| default: |
| sum_trbs_for_length = true; |
| preq->request.status = -1; |
| break; |
| } |
| |
| if (sum_trbs_for_length) { |
| td_length = cdnsp_sum_trb_lengths(pdev, ep_ring, ep_trb); |
| td_length += ep_trb_len - remaining; |
| } else { |
| td_length = requested; |
| } |
| |
| td->preq->request.actual += td_length; |
| |
| cdnsp_finish_td(pdev, td, event, pep, &status); |
| } |
| |
| static void cdnsp_skip_isoc_td(struct cdnsp_device *pdev, |
| struct cdnsp_td *td, |
| struct cdnsp_transfer_event *event, |
| struct cdnsp_ep *pep, |
| int status) |
| { |
| struct cdnsp_ring *ep_ring; |
| |
| ep_ring = cdnsp_dma_to_transfer_ring(pep, le64_to_cpu(event->buffer)); |
| td->preq->request.status = -EXDEV; |
| td->preq->request.actual = 0; |
| |
| /* Update ring dequeue pointer */ |
| while (ep_ring->dequeue != td->last_trb) |
| cdnsp_inc_deq(pdev, ep_ring); |
| |
| cdnsp_inc_deq(pdev, ep_ring); |
| |
| cdnsp_td_cleanup(pdev, td, ep_ring, &status); |
| } |
| |
| /* |
| * Process bulk and interrupt tds, update usb request status and actual_length. |
| */ |
| static void cdnsp_process_bulk_intr_td(struct cdnsp_device *pdev, |
| struct cdnsp_td *td, |
| union cdnsp_trb *ep_trb, |
| struct cdnsp_transfer_event *event, |
| struct cdnsp_ep *ep, |
| int *status) |
| { |
| u32 remaining, requested, ep_trb_len; |
| struct cdnsp_ring *ep_ring; |
| u32 trb_comp_code; |
| |
| ep_ring = cdnsp_dma_to_transfer_ring(ep, le64_to_cpu(event->buffer)); |
| trb_comp_code = GET_COMP_CODE(le32_to_cpu(event->transfer_len)); |
| remaining = EVENT_TRB_LEN(le32_to_cpu(event->transfer_len)); |
| ep_trb_len = TRB_LEN(le32_to_cpu(ep_trb->generic.field[2])); |
| requested = td->preq->request.length; |
| |
| switch (trb_comp_code) { |
| case COMP_SUCCESS: |
| case COMP_SHORT_PACKET: |
| *status = 0; |
| break; |
| case COMP_STOPPED_SHORT_PACKET: |
| td->preq->request.actual = remaining; |
| goto finish_td; |
| case COMP_STOPPED_LENGTH_INVALID: |
| /* Stopped on ep trb with invalid length, exclude it. */ |
| ep_trb_len = 0; |
| remaining = 0; |
| break; |
| } |
| |
| if (ep_trb == td->last_trb) |
| ep_trb_len = requested - remaining; |
| else |
| ep_trb_len = cdnsp_sum_trb_lengths(pdev, ep_ring, ep_trb) + |
| ep_trb_len - remaining; |
| td->preq->request.actual = ep_trb_len; |
| |
| finish_td: |
| ep->stream_info.drbls_count--; |
| |
| cdnsp_finish_td(pdev, td, event, ep, status); |
| } |
| |
| static void cdnsp_handle_tx_nrdy(struct cdnsp_device *pdev, |
| struct cdnsp_transfer_event *event) |
| { |
| struct cdnsp_generic_trb *generic; |
| struct cdnsp_ring *ep_ring; |
| struct cdnsp_ep *pep; |
| int cur_stream; |
| int ep_index; |
| int host_sid; |
| int dev_sid; |
| |
| generic = (struct cdnsp_generic_trb *)event; |
| ep_index = TRB_TO_EP_ID(le32_to_cpu(event->flags)) - 1; |
| dev_sid = TRB_TO_DEV_STREAM(le32_to_cpu(generic->field[0])); |
| host_sid = TRB_TO_HOST_STREAM(le32_to_cpu(generic->field[2])); |
| |
| pep = &pdev->eps[ep_index]; |
| |
| if (!(pep->ep_state & EP_HAS_STREAMS)) |
| return; |
| |
| if (host_sid == STREAM_PRIME_ACK) { |
| pep->stream_info.first_prime_det = 1; |
| for (cur_stream = 1; cur_stream < pep->stream_info.num_streams; |
| cur_stream++) { |
| ep_ring = pep->stream_info.stream_rings[cur_stream]; |
| ep_ring->stream_active = 1; |
| ep_ring->stream_rejected = 0; |
| } |
| } |
| |
| if (host_sid == STREAM_REJECTED) { |
| struct cdnsp_td *td, *td_temp; |
| |
| pep->stream_info.drbls_count--; |
| ep_ring = pep->stream_info.stream_rings[dev_sid]; |
| ep_ring->stream_active = 0; |
| ep_ring->stream_rejected = 1; |
| |
| list_for_each_entry_safe(td, td_temp, &ep_ring->td_list, |
| td_list) { |
| td->drbl = 0; |
| } |
| } |
| |
| cdnsp_ring_doorbell_for_active_rings(pdev, pep); |
| } |
| |
| /* |
| * If this function returns an error condition, it means it got a Transfer |
| * event with a corrupted TRB DMA address or endpoint is disabled. |
| */ |
| static int cdnsp_handle_tx_event(struct cdnsp_device *pdev, |
| struct cdnsp_transfer_event *event) |
| { |
| const struct usb_endpoint_descriptor *desc; |
| bool handling_skipped_tds = false; |
| struct cdnsp_segment *ep_seg; |
| struct cdnsp_ring *ep_ring; |
| int status = -EINPROGRESS; |
| union cdnsp_trb *ep_trb; |
| dma_addr_t ep_trb_dma; |
| struct cdnsp_ep *pep; |
| struct cdnsp_td *td; |
| u32 trb_comp_code; |
| int invalidate; |
| int ep_index; |
| |
| invalidate = le32_to_cpu(event->flags) & TRB_EVENT_INVALIDATE; |
| ep_index = TRB_TO_EP_ID(le32_to_cpu(event->flags)) - 1; |
| trb_comp_code = GET_COMP_CODE(le32_to_cpu(event->transfer_len)); |
| ep_trb_dma = le64_to_cpu(event->buffer); |
| |
| pep = &pdev->eps[ep_index]; |
| ep_ring = cdnsp_dma_to_transfer_ring(pep, le64_to_cpu(event->buffer)); |
| |
| /* |
| * If device is disconnect then all requests will be dequeued |
| * by upper layers as part of disconnect sequence. |
| * We don't want handle such event to avoid racing. |
| */ |
| if (invalidate || !pdev->gadget.connected) |
| goto cleanup; |
| |
| if (GET_EP_CTX_STATE(pep->out_ctx) == EP_STATE_DISABLED) { |
| trace_cdnsp_ep_disabled(pep->out_ctx); |
| goto err_out; |
| } |
| |
| /* Some transfer events don't always point to a trb*/ |
| if (!ep_ring) { |
| switch (trb_comp_code) { |
| case COMP_INVALID_STREAM_TYPE_ERROR: |
| case COMP_INVALID_STREAM_ID_ERROR: |
| case COMP_RING_UNDERRUN: |
| case COMP_RING_OVERRUN: |
| goto cleanup; |
| default: |
| dev_err(pdev->dev, "ERROR: %s event for unknown ring\n", |
| pep->name); |
| goto err_out; |
| } |
| } |
| |
| /* Look for some error cases that need special treatment. */ |
| switch (trb_comp_code) { |
| case COMP_BABBLE_DETECTED_ERROR: |
| status = -EOVERFLOW; |
| break; |
| case COMP_RING_UNDERRUN: |
| case COMP_RING_OVERRUN: |
| /* |
| * When the Isoch ring is empty, the controller will generate |
| * a Ring Overrun Event for IN Isoch endpoint or Ring |
| * Underrun Event for OUT Isoch endpoint. |
| */ |
| goto cleanup; |
| case COMP_MISSED_SERVICE_ERROR: |
| /* |
| * When encounter missed service error, one or more isoc tds |
| * may be missed by controller. |
| * Set skip flag of the ep_ring; Complete the missed tds as |
| * short transfer when process the ep_ring next time. |
| */ |
| pep->skip = true; |
| break; |
| } |
| |
| do { |
| /* |
| * This TRB should be in the TD at the head of this ring's TD |
| * list. |
| */ |
| if (list_empty(&ep_ring->td_list)) { |
| /* |
| * Don't print warnings if it's due to a stopped |
| * endpoint generating an extra completion event, or |
| * a event for the last TRB of a short TD we already |
| * got a short event for. |
| * The short TD is already removed from the TD list. |
| */ |
| if (!(trb_comp_code == COMP_STOPPED || |
| trb_comp_code == COMP_STOPPED_LENGTH_INVALID || |
| ep_ring->last_td_was_short)) |
| trace_cdnsp_trb_without_td(ep_ring, |
| (struct cdnsp_generic_trb *)event); |
| |
| if (pep->skip) { |
| pep->skip = false; |
| trace_cdnsp_ep_list_empty_with_skip(pep, 0); |
| } |
| |
| goto cleanup; |
| } |
| |
| td = list_entry(ep_ring->td_list.next, struct cdnsp_td, |
| td_list); |
| |
| /* Is this a TRB in the currently executing TD? */ |
| ep_seg = cdnsp_trb_in_td(pdev, ep_ring->deq_seg, |
| ep_ring->dequeue, td->last_trb, |
| ep_trb_dma); |
| |
| desc = td->preq->pep->endpoint.desc; |
| |
| if (ep_seg) { |
| ep_trb = &ep_seg->trbs[(ep_trb_dma - ep_seg->dma) |
| / sizeof(*ep_trb)]; |
| |
| trace_cdnsp_handle_transfer(ep_ring, |
| (struct cdnsp_generic_trb *)ep_trb); |
| |
| if (pep->skip && usb_endpoint_xfer_isoc(desc) && |
| td->last_trb != ep_trb) |
| return -EAGAIN; |
| } |
| |
| /* |
| * Skip the Force Stopped Event. The event_trb(ep_trb_dma) |
| * of FSE is not in the current TD pointed by ep_ring->dequeue |
| * because that the hardware dequeue pointer still at the |
| * previous TRB of the current TD. The previous TRB maybe a |
| * Link TD or the last TRB of the previous TD. The command |
| * completion handle will take care the rest. |
| */ |
| if (!ep_seg && (trb_comp_code == COMP_STOPPED || |
| trb_comp_code == COMP_STOPPED_LENGTH_INVALID)) { |
| pep->skip = false; |
| goto cleanup; |
| } |
| |
| if (!ep_seg) { |
| if (!pep->skip || !usb_endpoint_xfer_isoc(desc)) { |
| /* Something is busted, give up! */ |
| dev_err(pdev->dev, |
| "ERROR Transfer event TRB DMA ptr not " |
| "part of current TD ep_index %d " |
| "comp_code %u\n", ep_index, |
| trb_comp_code); |
| return -EINVAL; |
| } |
| |
| cdnsp_skip_isoc_td(pdev, td, event, pep, status); |
| goto cleanup; |
| } |
| |
| if (trb_comp_code == COMP_SHORT_PACKET) |
| ep_ring->last_td_was_short = true; |
| else |
| ep_ring->last_td_was_short = false; |
| |
| if (pep->skip) { |
| pep->skip = false; |
| cdnsp_skip_isoc_td(pdev, td, event, pep, status); |
| goto cleanup; |
| } |
| |
| if (cdnsp_trb_is_noop(ep_trb)) |
| goto cleanup; |
| |
| if (usb_endpoint_xfer_control(desc)) |
| cdnsp_process_ctrl_td(pdev, td, ep_trb, event, pep, |
| &status); |
| else if (usb_endpoint_xfer_isoc(desc)) |
| cdnsp_process_isoc_td(pdev, td, ep_trb, event, pep, |
| status); |
| else |
| cdnsp_process_bulk_intr_td(pdev, td, ep_trb, event, pep, |
| &status); |
| cleanup: |
| handling_skipped_tds = pep->skip; |
| |
| /* |
| * Do not update event ring dequeue pointer if we're in a loop |
| * processing missed tds. |
| */ |
| if (!handling_skipped_tds) |
| cdnsp_inc_deq(pdev, pdev->event_ring); |
| |
| /* |
| * If ep->skip is set, it means there are missed tds on the |
| * endpoint ring need to take care of. |
| * Process them as short transfer until reach the td pointed by |
| * the event. |
| */ |
| } while (handling_skipped_tds); |
| return 0; |
| |
| err_out: |
| dev_err(pdev->dev, "@%016llx %08x %08x %08x %08x\n", |
| (unsigned long long) |
| cdnsp_trb_virt_to_dma(pdev->event_ring->deq_seg, |
| pdev->event_ring->dequeue), |
| lower_32_bits(le64_to_cpu(event->buffer)), |
| upper_32_bits(le64_to_cpu(event->buffer)), |
| le32_to_cpu(event->transfer_len), |
| le32_to_cpu(event->flags)); |
| return -EINVAL; |
| } |
| |
| /* |
| * This function handles all events on the event ring. |
| * Returns true for "possibly more events to process" (caller should call |
| * again), otherwise false if done. |
| */ |
| static bool cdnsp_handle_event(struct cdnsp_device *pdev) |
| { |
| unsigned int comp_code; |
| union cdnsp_trb *event; |
| bool update_ptrs = true; |
| u32 cycle_bit; |
| int ret = 0; |
| u32 flags; |
| |
| event = pdev->event_ring->dequeue; |
| flags = le32_to_cpu(event->event_cmd.flags); |
| cycle_bit = (flags & TRB_CYCLE); |
| |
| /* Does the controller or driver own the TRB? */ |
| if (cycle_bit != pdev->event_ring->cycle_state) |
| return false; |
| |
| trace_cdnsp_handle_event(pdev->event_ring, &event->generic); |
| |
| /* |
| * Barrier between reading the TRB_CYCLE (valid) flag above and any |
| * reads of the event's flags/data below. |
| */ |
| rmb(); |
| |
| switch (flags & TRB_TYPE_BITMASK) { |
| case TRB_TYPE(TRB_COMPLETION): |
| /* |
| * Command can't be handled in interrupt context so just |
| * increment command ring dequeue pointer. |
| */ |
| cdnsp_inc_deq(pdev, pdev->cmd_ring); |
| break; |
| case TRB_TYPE(TRB_PORT_STATUS): |
| cdnsp_handle_port_status(pdev, event); |
| update_ptrs = false; |
| break; |
| case TRB_TYPE(TRB_TRANSFER): |
| ret = cdnsp_handle_tx_event(pdev, &event->trans_event); |
| if (ret >= 0) |
| update_ptrs = false; |
| break; |
| case TRB_TYPE(TRB_SETUP): |
| pdev->ep0_stage = CDNSP_SETUP_STAGE; |
| pdev->setup_id = TRB_SETUPID_TO_TYPE(flags); |
| pdev->setup_speed = TRB_SETUP_SPEEDID(flags); |
| pdev->setup = *((struct usb_ctrlrequest *) |
| &event->trans_event.buffer); |
| |
| cdnsp_setup_analyze(pdev); |
| break; |
| case TRB_TYPE(TRB_ENDPOINT_NRDY): |
| cdnsp_handle_tx_nrdy(pdev, &event->trans_event); |
| break; |
| case TRB_TYPE(TRB_HC_EVENT): { |
| comp_code = GET_COMP_CODE(le32_to_cpu(event->generic.field[2])); |
| |
| switch (comp_code) { |
| case COMP_EVENT_RING_FULL_ERROR: |
| dev_err(pdev->dev, "Event Ring Full\n"); |
| break; |
| default: |
| dev_err(pdev->dev, "Controller error code 0x%02x\n", |
| comp_code); |
| } |
| |
| break; |
| } |
| case TRB_TYPE(TRB_MFINDEX_WRAP): |
| case TRB_TYPE(TRB_DRB_OVERFLOW): |
| break; |
| default: |
| dev_warn(pdev->dev, "ERROR unknown event type %ld\n", |
| TRB_FIELD_TO_TYPE(flags)); |
| } |
| |
| if (update_ptrs) |
| /* Update SW event ring dequeue pointer. */ |
| cdnsp_inc_deq(pdev, pdev->event_ring); |
| |
| /* |
| * Caller will call us again to check if there are more items |
| * on the event ring. |
| */ |
| return true; |
| } |
| |
| irqreturn_t cdnsp_thread_irq_handler(int irq, void *data) |
| { |
| struct cdnsp_device *pdev = (struct cdnsp_device *)data; |
| union cdnsp_trb *event_ring_deq; |
| unsigned long flags; |
| int counter = 0; |
| |
| local_bh_disable(); |
| spin_lock_irqsave(&pdev->lock, flags); |
| |
| if (pdev->cdnsp_state & (CDNSP_STATE_HALTED | CDNSP_STATE_DYING)) { |
| /* |
| * While removing or stopping driver there may still be deferred |
| * not handled interrupt which should not be treated as error. |
| * Driver should simply ignore it. |
| */ |
| if (pdev->gadget_driver) |
| cdnsp_died(pdev); |
| |
| spin_unlock_irqrestore(&pdev->lock, flags); |
| local_bh_enable(); |
| return IRQ_HANDLED; |
| } |
| |
| event_ring_deq = pdev->event_ring->dequeue; |
| |
| while (cdnsp_handle_event(pdev)) { |
| if (++counter >= TRBS_PER_EV_DEQ_UPDATE) { |
| cdnsp_update_erst_dequeue(pdev, event_ring_deq, 0); |
| event_ring_deq = pdev->event_ring->dequeue; |
| counter = 0; |
| } |
| } |
| |
| cdnsp_update_erst_dequeue(pdev, event_ring_deq, 1); |
| |
| spin_unlock_irqrestore(&pdev->lock, flags); |
| local_bh_enable(); |
| |
| return IRQ_HANDLED; |
| } |
| |
| irqreturn_t cdnsp_irq_handler(int irq, void *priv) |
| { |
| struct cdnsp_device *pdev = (struct cdnsp_device *)priv; |
| u32 irq_pending; |
| u32 status; |
| |
| status = readl(&pdev->op_regs->status); |
| |
| if (status == ~(u32)0) { |
| cdnsp_died(pdev); |
| return IRQ_HANDLED; |
| } |
| |
| if (!(status & STS_EINT)) |
| return IRQ_NONE; |
| |
| writel(status | STS_EINT, &pdev->op_regs->status); |
| irq_pending = readl(&pdev->ir_set->irq_pending); |
| irq_pending |= IMAN_IP; |
| writel(irq_pending, &pdev->ir_set->irq_pending); |
| |
| if (status & STS_FATAL) { |
| cdnsp_died(pdev); |
| return IRQ_HANDLED; |
| } |
| |
| return IRQ_WAKE_THREAD; |
| } |
| |
| /* |
| * Generic function for queuing a TRB on a ring. |
| * The caller must have checked to make sure there's room on the ring. |
| * |
| * @more_trbs_coming: Will you enqueue more TRBs before setting doorbell? |
| */ |
| static void cdnsp_queue_trb(struct cdnsp_device *pdev, struct cdnsp_ring *ring, |
| bool more_trbs_coming, u32 field1, u32 field2, |
| u32 field3, u32 field4) |
| { |
| struct cdnsp_generic_trb *trb; |
| |
| trb = &ring->enqueue->generic; |
| |
| trb->field[0] = cpu_to_le32(field1); |
| trb->field[1] = cpu_to_le32(field2); |
| trb->field[2] = cpu_to_le32(field3); |
| trb->field[3] = cpu_to_le32(field4); |
| |
| trace_cdnsp_queue_trb(ring, trb); |
| cdnsp_inc_enq(pdev, ring, more_trbs_coming); |
| } |
| |
| /* |
| * Does various checks on the endpoint ring, and makes it ready to |
| * queue num_trbs. |
| */ |
| static int cdnsp_prepare_ring(struct cdnsp_device *pdev, |
| struct cdnsp_ring *ep_ring, |
| u32 ep_state, unsigned |
| int num_trbs, |
| gfp_t mem_flags) |
| { |
| unsigned int num_trbs_needed; |
| |
| /* Make sure the endpoint has been added to controller schedule. */ |
| switch (ep_state) { |
| case EP_STATE_STOPPED: |
| case EP_STATE_RUNNING: |
| case EP_STATE_HALTED: |
| break; |
| default: |
| dev_err(pdev->dev, "ERROR: incorrect endpoint state\n"); |
| return -EINVAL; |
| } |
| |
| while (1) { |
| if (cdnsp_room_on_ring(pdev, ep_ring, num_trbs)) |
| break; |
| |
| trace_cdnsp_no_room_on_ring("try ring expansion"); |
| |
| num_trbs_needed = num_trbs - ep_ring->num_trbs_free; |
| if (cdnsp_ring_expansion(pdev, ep_ring, num_trbs_needed, |
| mem_flags)) { |
| dev_err(pdev->dev, "Ring expansion failed\n"); |
| return -ENOMEM; |
| } |
| } |
| |
| while (cdnsp_trb_is_link(ep_ring->enqueue)) { |
| ep_ring->enqueue->link.control |= cpu_to_le32(TRB_CHAIN); |
| /* The cycle bit must be set as the last operation. */ |
| wmb(); |
| ep_ring->enqueue->link.control ^= cpu_to_le32(TRB_CYCLE); |
| |
| /* Toggle the cycle bit after the last ring segment. */ |
| if (cdnsp_link_trb_toggles_cycle(ep_ring->enqueue)) |
| ep_ring->cycle_state ^= 1; |
| ep_ring->enq_seg = ep_ring->enq_seg->next; |
| ep_ring->enqueue = ep_ring->enq_seg->trbs; |
| } |
| return 0; |
| } |
| |
| static int cdnsp_prepare_transfer(struct cdnsp_device *pdev, |
| struct cdnsp_request *preq, |
| unsigned int num_trbs) |
| { |
| struct cdnsp_ring *ep_ring; |
| int ret; |
| |
| ep_ring = cdnsp_get_transfer_ring(pdev, preq->pep, |
| preq->request.stream_id); |
| if (!ep_ring) |
| return -EINVAL; |
| |
| ret = cdnsp_prepare_ring(pdev, ep_ring, |
| GET_EP_CTX_STATE(preq->pep->out_ctx), |
| num_trbs, GFP_ATOMIC); |
| if (ret) |
| return ret; |
| |
| INIT_LIST_HEAD(&preq->td.td_list); |
| preq->td.preq = preq; |
| |
| /* Add this TD to the tail of the endpoint ring's TD list. */ |
| list_add_tail(&preq->td.td_list, &ep_ring->td_list); |
| ep_ring->num_tds++; |
| preq->pep->stream_info.td_count++; |
| |
| preq->td.start_seg = ep_ring->enq_seg; |
| preq->td.first_trb = ep_ring->enqueue; |
| |
| return 0; |
| } |
| |
| static unsigned int cdnsp_count_trbs(u64 addr, u64 len) |
| { |
| unsigned int num_trbs; |
| |
| num_trbs = DIV_ROUND_UP(len + (addr & (TRB_MAX_BUFF_SIZE - 1)), |
| TRB_MAX_BUFF_SIZE); |
| if (num_trbs == 0) |
| num_trbs++; |
| |
| return num_trbs; |
| } |
| |
| static unsigned int count_trbs_needed(struct cdnsp_request *preq) |
| { |
| return cdnsp_count_trbs(preq->request.dma, preq->request.length); |
| } |
| |
| static unsigned int count_sg_trbs_needed(struct cdnsp_request *preq) |
| { |
| unsigned int i, len, full_len, num_trbs = 0; |
| struct scatterlist *sg; |
| |
| full_len = preq->request.length; |
| |
| for_each_sg(preq->request.sg, sg, preq->request.num_sgs, i) { |
| len = sg_dma_len(sg); |
| num_trbs += cdnsp_count_trbs(sg_dma_address(sg), len); |
| len = min(len, full_len); |
| full_len -= len; |
| if (full_len == 0) |
| break; |
| } |
| |
| return num_trbs; |
| } |
| |
| static void cdnsp_check_trb_math(struct cdnsp_request *preq, int running_total) |
| { |
| if (running_total != preq->request.length) |
| dev_err(preq->pep->pdev->dev, |
| "%s - Miscalculated tx length, " |
| "queued %#x, asked for %#x (%d)\n", |
| preq->pep->name, running_total, |
| preq->request.length, preq->request.actual); |
| } |
| |
| /* |
| * TD size is the number of max packet sized packets remaining in the TD |
| * (*not* including this TRB). |
| * |
| * Total TD packet count = total_packet_count = |
| * DIV_ROUND_UP(TD size in bytes / wMaxPacketSize) |
| * |
| * Packets transferred up to and including this TRB = packets_transferred = |
| * rounddown(total bytes transferred including this TRB / wMaxPacketSize) |
| * |
| * TD size = total_packet_count - packets_transferred |
| * |
| * It must fit in bits 21:17, so it can't be bigger than 31. |
| * This is taken care of in the TRB_TD_SIZE() macro |
| * |
| * The last TRB in a TD must have the TD size set to zero. |
| */ |
| static u32 cdnsp_td_remainder(struct cdnsp_device *pdev, |
| int transferred, |
| int trb_buff_len, |
| unsigned int td_total_len, |
| struct cdnsp_request *preq, |
| bool more_trbs_coming, |
| bool zlp) |
| { |
| u32 maxp, total_packet_count; |
| |
| /* Before ZLP driver needs set TD_SIZE = 1. */ |
| if (zlp) |
| return 1; |
| |
| /* One TRB with a zero-length data packet. */ |
| if (!more_trbs_coming || (transferred == 0 && trb_buff_len == 0) || |
| trb_buff_len == td_total_len) |
| return 0; |
| |
| maxp = usb_endpoint_maxp(preq->pep->endpoint.desc); |
| total_packet_count = DIV_ROUND_UP(td_total_len, maxp); |
| |
| /* Queuing functions don't count the current TRB into transferred. */ |
| return (total_packet_count - ((transferred + trb_buff_len) / maxp)); |
| } |
| |
| static int cdnsp_align_td(struct cdnsp_device *pdev, |
| struct cdnsp_request *preq, u32 enqd_len, |
| u32 *trb_buff_len, struct cdnsp_segment *seg) |
| { |
| struct device *dev = pdev->dev; |
| unsigned int unalign; |
| unsigned int max_pkt; |
| u32 new_buff_len; |
| |
| max_pkt = usb_endpoint_maxp(preq->pep->endpoint.desc); |
| unalign = (enqd_len + *trb_buff_len) % max_pkt; |
| |
| /* We got lucky, last normal TRB data on segment is packet aligned. */ |
| if (unalign == 0) |
| return 0; |
| |
| /* Is the last nornal TRB alignable by splitting it. */ |
| if (*trb_buff_len > unalign) { |
| *trb_buff_len -= unalign; |
| trace_cdnsp_bounce_align_td_split(preq, *trb_buff_len, |
| enqd_len, 0, unalign); |
| return 0; |
| } |
| |
| /* |
| * We want enqd_len + trb_buff_len to sum up to a number aligned to |
| * number which is divisible by the endpoint's wMaxPacketSize. IOW: |
| * (size of currently enqueued TRBs + remainder) % wMaxPacketSize == 0. |
| */ |
| new_buff_len = max_pkt - (enqd_len % max_pkt); |
| |
| if (new_buff_len > (preq->request.length - enqd_len)) |
| new_buff_len = (preq->request.length - enqd_len); |
| |
| /* Create a max max_pkt sized bounce buffer pointed to by last trb. */ |
| if (preq->direction) { |
| sg_pcopy_to_buffer(preq->request.sg, |
| preq->request.num_mapped_sgs, |
| seg->bounce_buf, new_buff_len, enqd_len); |
| seg->bounce_dma = dma_map_single(dev, seg->bounce_buf, |
| max_pkt, DMA_TO_DEVICE); |
| } else { |
| seg->bounce_dma = dma_map_single(dev, seg->bounce_buf, |
| max_pkt, DMA_FROM_DEVICE); |
| } |
| |
| if (dma_mapping_error(dev, seg->bounce_dma)) { |
| /* Try without aligning.*/ |
| dev_warn(pdev->dev, |
| "Failed mapping bounce buffer, not aligning\n"); |
| return 0; |
| } |
| |
| *trb_buff_len = new_buff_len; |
| seg->bounce_len = new_buff_len; |
| seg->bounce_offs = enqd_len; |
| |
| trace_cdnsp_bounce_map(preq, new_buff_len, enqd_len, seg->bounce_dma, |
| unalign); |
| |
| /* |
| * Bounce buffer successful aligned and seg->bounce_dma will be used |
| * in transfer TRB as new transfer buffer address. |
| */ |
| return 1; |
| } |
| |
| int cdnsp_queue_bulk_tx(struct cdnsp_device *pdev, struct cdnsp_request *preq) |
| { |
| unsigned int enqd_len, block_len, trb_buff_len, full_len; |
| unsigned int start_cycle, num_sgs = 0; |
| struct cdnsp_generic_trb *start_trb; |
| u32 field, length_field, remainder; |
| struct scatterlist *sg = NULL; |
| bool more_trbs_coming = true; |
| bool need_zero_pkt = false; |
| bool zero_len_trb = false; |
| struct cdnsp_ring *ring; |
| bool first_trb = true; |
| unsigned int num_trbs; |
| struct cdnsp_ep *pep; |
| u64 addr, send_addr; |
| int sent_len, ret; |
| |
| ring = cdnsp_request_to_transfer_ring(pdev, preq); |
| if (!ring) |
| return -EINVAL; |
| |
| full_len = preq->request.length; |
| |
| if (preq->request.num_sgs) { |
| num_sgs = preq->request.num_sgs; |
| sg = preq->request.sg; |
| addr = (u64)sg_dma_address(sg); |
| block_len = sg_dma_len(sg); |
| num_trbs = count_sg_trbs_needed(preq); |
| } else { |
| num_trbs = count_trbs_needed(preq); |
| addr = (u64)preq->request.dma; |
| block_len = full_len; |
| } |
| |
| pep = preq->pep; |
| |
| /* Deal with request.zero - need one more td/trb. */ |
| if (preq->request.zero && preq->request.length && |
| IS_ALIGNED(full_len, usb_endpoint_maxp(pep->endpoint.desc))) { |
| need_zero_pkt = true; |
| num_trbs++; |
| } |
| |
| ret = cdnsp_prepare_transfer(pdev, preq, num_trbs); |
| if (ret) |
| return ret; |
| |
| /* |
| * Don't give the first TRB to the hardware (by toggling the cycle bit) |
| * until we've finished creating all the other TRBs. The ring's cycle |
| * state may change as we enqueue the other TRBs, so save it too. |
| */ |
| start_trb = &ring->enqueue->generic; |
| start_cycle = ring->cycle_state; |
| send_addr = addr; |
| |
| /* Queue the TRBs, even if they are zero-length */ |
| for (enqd_len = 0; zero_len_trb || first_trb || enqd_len < full_len; |
| enqd_len += trb_buff_len) { |
| field = TRB_TYPE(TRB_NORMAL); |
| |
| /* TRB buffer should not cross 64KB boundaries */ |
| trb_buff_len = TRB_BUFF_LEN_UP_TO_BOUNDARY(addr); |
| trb_buff_len = min(trb_buff_len, block_len); |
| if (enqd_len + trb_buff_len > full_len) |
| trb_buff_len = full_len - enqd_len; |
| |
| /* Don't change the cycle bit of the first TRB until later */ |
| if (first_trb) { |
| first_trb = false; |
| if (start_cycle == 0) |
| field |= TRB_CYCLE; |
| } else { |
| field |= ring->cycle_state; |
| } |
| |
| /* |
| * Chain all the TRBs together; clear the chain bit in the last |
| * TRB to indicate it's the last TRB in the chain. |
| */ |
| if (enqd_len + trb_buff_len < full_len || need_zero_pkt) { |
| field |= TRB_CHAIN; |
| if (cdnsp_trb_is_link(ring->enqueue + 1)) { |
| if (cdnsp_align_td(pdev, preq, enqd_len, |
| &trb_buff_len, |
| ring->enq_seg)) { |
| send_addr = ring->enq_seg->bounce_dma; |
| /* Assuming TD won't span 2 segs */ |
| preq->td.bounce_seg = ring->enq_seg; |
| } |
| } |
| } |
| |
| if (enqd_len + trb_buff_len >= full_len) { |
| if (need_zero_pkt && !zero_len_trb) { |
| zero_len_trb = true; |
| } else { |
| zero_len_trb = false; |
| field &= ~TRB_CHAIN; |
| field |= TRB_IOC; |
| more_trbs_coming = false; |
| need_zero_pkt = false; |
| preq->td.last_trb = ring->enqueue; |
| } |
| } |
| |
| /* Only set interrupt on short packet for OUT endpoints. */ |
| if (!preq->direction) |
| field |= TRB_ISP; |
| |
| /* Set the TRB length, TD size, and interrupter fields. */ |
| remainder = cdnsp_td_remainder(pdev, enqd_len, trb_buff_len, |
| full_len, preq, |
| more_trbs_coming, |
| zero_len_trb); |
| |
| length_field = TRB_LEN(trb_buff_len) | TRB_TD_SIZE(remainder) | |
| TRB_INTR_TARGET(0); |
| |
| cdnsp_queue_trb(pdev, ring, more_trbs_coming, |
| lower_32_bits(send_addr), |
| upper_32_bits(send_addr), |
| length_field, |
| field); |
| |
| addr += trb_buff_len; |
| sent_len = trb_buff_len; |
| while (sg && sent_len >= block_len) { |
| /* New sg entry */ |
| --num_sgs; |
| sent_len -= block_len; |
| if (num_sgs != 0) { |
| sg = sg_next(sg); |
| block_len = sg_dma_len(sg); |
| addr = (u64)sg_dma_address(sg); |
| addr += sent_len; |
| } |
| } |
| block_len -= sent_len; |
| send_addr = addr; |
| } |
| |
| cdnsp_check_trb_math(preq, enqd_len); |
| ret = cdnsp_giveback_first_trb(pdev, pep, preq->request.stream_id, |
| start_cycle, start_trb); |
| |
| if (ret) |
| preq->td.drbl = 1; |
| |
| return 0; |
| } |
| |
| int cdnsp_queue_ctrl_tx(struct cdnsp_device *pdev, struct cdnsp_request *preq) |
| { |
| u32 field, length_field, zlp = 0; |
| struct cdnsp_ep *pep = preq->pep; |
| struct cdnsp_ring *ep_ring; |
| int num_trbs; |
| u32 maxp; |
| int ret; |
| |
| ep_ring = cdnsp_request_to_transfer_ring(pdev, preq); |
| if (!ep_ring) |
| return -EINVAL; |
| |
| /* 1 TRB for data, 1 for status */ |
| num_trbs = (pdev->three_stage_setup) ? 2 : 1; |
| |
| maxp = usb_endpoint_maxp(pep->endpoint.desc); |
| |
| if (preq->request.zero && preq->request.length && |
| (preq->request.length % maxp == 0)) { |
| num_trbs++; |
| zlp = 1; |
| } |
| |
| ret = cdnsp_prepare_transfer(pdev, preq, num_trbs); |
| if (ret) |
| return ret; |
| |
| /* If there's data, queue data TRBs */ |
| if (preq->request.length > 0) { |
| field = TRB_TYPE(TRB_DATA); |
| |
| if (zlp) |
| field |= TRB_CHAIN; |
| else |
| field |= TRB_IOC | (pdev->ep0_expect_in ? 0 : TRB_ISP); |
| |
| if (pdev->ep0_expect_in) |
| field |= TRB_DIR_IN; |
| |
| length_field = TRB_LEN(preq->request.length) | |
| TRB_TD_SIZE(zlp) | TRB_INTR_TARGET(0); |
| |
| cdnsp_queue_trb(pdev, ep_ring, true, |
| lower_32_bits(preq->request.dma), |
| upper_32_bits(preq->request.dma), length_field, |
| field | ep_ring->cycle_state | |
| TRB_SETUPID(pdev->setup_id) | |
| pdev->setup_speed); |
| |
| if (zlp) { |
| field = TRB_TYPE(TRB_NORMAL) | TRB_IOC; |
| |
| if (!pdev->ep0_expect_in) |
| field = TRB_ISP; |
| |
| cdnsp_queue_trb(pdev, ep_ring, true, |
| lower_32_bits(preq->request.dma), |
| upper_32_bits(preq->request.dma), 0, |
| field | ep_ring->cycle_state | |
| TRB_SETUPID(pdev->setup_id) | |
| pdev->setup_speed); |
| } |
| |
| pdev->ep0_stage = CDNSP_DATA_STAGE; |
| } |
| |
| /* Save the DMA address of the last TRB in the TD. */ |
| preq->td.last_trb = ep_ring->enqueue; |
| |
| /* Queue status TRB. */ |
| if (preq->request.length == 0) |
| field = ep_ring->cycle_state; |
| else |
| field = (ep_ring->cycle_state ^ 1); |
| |
| if (preq->request.length > 0 && pdev->ep0_expect_in) |
| field |= TRB_DIR_IN; |
| |
| if (pep->ep_state & EP0_HALTED_STATUS) { |
| pep->ep_state &= ~EP0_HALTED_STATUS; |
| field |= TRB_SETUPSTAT(TRB_SETUPSTAT_STALL); |
| } else { |
| field |= TRB_SETUPSTAT(TRB_SETUPSTAT_ACK); |
| } |
| |
| cdnsp_queue_trb(pdev, ep_ring, false, 0, 0, TRB_INTR_TARGET(0), |
| field | TRB_IOC | TRB_SETUPID(pdev->setup_id) | |
| TRB_TYPE(TRB_STATUS) | pdev->setup_speed); |
| |
| cdnsp_ring_ep_doorbell(pdev, pep, preq->request.stream_id); |
| |
| return 0; |
| } |
| |
| int cdnsp_cmd_stop_ep(struct cdnsp_device *pdev, struct cdnsp_ep *pep) |
| { |
| u32 ep_state = GET_EP_CTX_STATE(pep->out_ctx); |
| int ret = 0; |
| |
| if (ep_state == EP_STATE_STOPPED || ep_state == EP_STATE_DISABLED || |
| ep_state == EP_STATE_HALTED) { |
| trace_cdnsp_ep_stopped_or_disabled(pep->out_ctx); |
| goto ep_stopped; |
| } |
| |
| cdnsp_queue_stop_endpoint(pdev, pep->idx); |
| cdnsp_ring_cmd_db(pdev); |
| ret = cdnsp_wait_for_cmd_compl(pdev); |
| |
| trace_cdnsp_handle_cmd_stop_ep(pep->out_ctx); |
| |
| ep_stopped: |
| pep->ep_state |= EP_STOPPED; |
| return ret; |
| } |
| |
| /* |
| * The transfer burst count field of the isochronous TRB defines the number of |
| * bursts that are required to move all packets in this TD. Only SuperSpeed |
| * devices can burst up to bMaxBurst number of packets per service interval. |
| * This field is zero based, meaning a value of zero in the field means one |
| * burst. Basically, for everything but SuperSpeed devices, this field will be |
| * zero. |
| */ |
| static unsigned int cdnsp_get_burst_count(struct cdnsp_device *pdev, |
| struct cdnsp_request *preq, |
| unsigned int total_packet_count) |
| { |
| unsigned int max_burst; |
| |
| if (pdev->gadget.speed < USB_SPEED_SUPER) |
| return 0; |
| |
| max_burst = preq->pep->endpoint.comp_desc->bMaxBurst; |
| return DIV_ROUND_UP(total_packet_count, max_burst + 1) - 1; |
| } |
| |
| /* |
| * Returns the number of packets in the last "burst" of packets. This field is |
| * valid for all speeds of devices. USB 2.0 devices can only do one "burst", so |
| * the last burst packet count is equal to the total number of packets in the |
| * TD. SuperSpeed endpoints can have up to 3 bursts. All but the last burst |
| * must contain (bMaxBurst + 1) number of packets, but the last burst can |
| * contain 1 to (bMaxBurst + 1) packets. |
| */ |
| static unsigned int |
| cdnsp_get_last_burst_packet_count(struct cdnsp_device *pdev, |
| struct cdnsp_request *preq, |
| unsigned int total_packet_count) |
| { |
| unsigned int max_burst; |
| unsigned int residue; |
| |
| if (pdev->gadget.speed >= USB_SPEED_SUPER) { |
| /* bMaxBurst is zero based: 0 means 1 packet per burst. */ |
| max_burst = preq->pep->endpoint.comp_desc->bMaxBurst; |
| residue = total_packet_count % (max_burst + 1); |
| |
| /* |
| * If residue is zero, the last burst contains (max_burst + 1) |
| * number of packets, but the TLBPC field is zero-based. |
| */ |
| if (residue == 0) |
| return max_burst; |
| |
| return residue - 1; |
| } |
| if (total_packet_count == 0) |
| return 0; |
| |
| return total_packet_count - 1; |
| } |
| |
| /* Queue function isoc transfer */ |
| int cdnsp_queue_isoc_tx(struct cdnsp_device *pdev, |
| struct cdnsp_request *preq) |
| { |
| unsigned int trb_buff_len, td_len, td_remain_len, block_len; |
| unsigned int burst_count, last_burst_pkt; |
| unsigned int total_pkt_count, max_pkt; |
| struct cdnsp_generic_trb *start_trb; |
| struct scatterlist *sg = NULL; |
| bool more_trbs_coming = true; |
| struct cdnsp_ring *ep_ring; |
| unsigned int num_sgs = 0; |
| int running_total = 0; |
| u32 field, length_field; |
| u64 addr, send_addr; |
| int start_cycle; |
| int trbs_per_td; |
| int i, sent_len, ret; |
| |
| ep_ring = preq->pep->ring; |
| |
| td_len = preq->request.length; |
| |
| if (preq->request.num_sgs) { |
| num_sgs = preq->request.num_sgs; |
| sg = preq->request.sg; |
| addr = (u64)sg_dma_address(sg); |
| block_len = sg_dma_len(sg); |
| trbs_per_td = count_sg_trbs_needed(preq); |
| } else { |
| addr = (u64)preq->request.dma; |
| block_len = td_len; |
| trbs_per_td = count_trbs_needed(preq); |
| } |
| |
| ret = cdnsp_prepare_transfer(pdev, preq, trbs_per_td); |
| if (ret) |
| return ret; |
| |
| start_trb = &ep_ring->enqueue->generic; |
| start_cycle = ep_ring->cycle_state; |
| td_remain_len = td_len; |
| send_addr = addr; |
| |
| max_pkt = usb_endpoint_maxp(preq->pep->endpoint.desc); |
| total_pkt_count = DIV_ROUND_UP(td_len, max_pkt); |
| |
| /* A zero-length transfer still involves at least one packet. */ |
| if (total_pkt_count == 0) |
| total_pkt_count++; |
| |
| burst_count = cdnsp_get_burst_count(pdev, preq, total_pkt_count); |
| last_burst_pkt = cdnsp_get_last_burst_packet_count(pdev, preq, |
| total_pkt_count); |
| |
| /* |
| * Set isoc specific data for the first TRB in a TD. |
| * Prevent HW from getting the TRBs by keeping the cycle state |
| * inverted in the first TDs isoc TRB. |
| */ |
| field = TRB_TYPE(TRB_ISOC) | TRB_TLBPC(last_burst_pkt) | |
| TRB_SIA | TRB_TBC(burst_count); |
| |
| if (!start_cycle) |
| field |= TRB_CYCLE; |
| |
| /* Fill the rest of the TRB fields, and remaining normal TRBs. */ |
| for (i = 0; i < trbs_per_td; i++) { |
| u32 remainder; |
| |
| /* Calculate TRB length. */ |
| trb_buff_len = TRB_BUFF_LEN_UP_TO_BOUNDARY(addr); |
| trb_buff_len = min(trb_buff_len, block_len); |
| if (trb_buff_len > td_remain_len) |
| trb_buff_len = td_remain_len; |
| |
| /* Set the TRB length, TD size, & interrupter fields. */ |
| remainder = cdnsp_td_remainder(pdev, running_total, |
| trb_buff_len, td_len, preq, |
| more_trbs_coming, 0); |
| |
| length_field = TRB_LEN(trb_buff_len) | TRB_TD_SIZE(remainder) | |
| TRB_INTR_TARGET(0); |
| |
| /* Only first TRB is isoc, overwrite otherwise. */ |
| if (i) { |
| field = TRB_TYPE(TRB_NORMAL) | ep_ring->cycle_state; |
| length_field |= TRB_TD_SIZE(remainder); |
| } else { |
| length_field |= TRB_TD_SIZE_TBC(burst_count); |
| } |
| |
| /* Only set interrupt on short packet for OUT EPs. */ |
| if (usb_endpoint_dir_out(preq->pep->endpoint.desc)) |
| field |= TRB_ISP; |
| |
| /* Set the chain bit for all except the last TRB. */ |
| if (i < trbs_per_td - 1) { |
| more_trbs_coming = true; |
| field |= TRB_CHAIN; |
| } else { |
| more_trbs_coming = false; |
| preq->td.last_trb = ep_ring->enqueue; |
| field |= TRB_IOC; |
| } |
| |
| cdnsp_queue_trb(pdev, ep_ring, more_trbs_coming, |
| lower_32_bits(send_addr), upper_32_bits(send_addr), |
| length_field, field); |
| |
| running_total += trb_buff_len; |
| addr += trb_buff_len; |
| td_remain_len -= trb_buff_len; |
| |
| sent_len = trb_buff_len; |
| while (sg && sent_len >= block_len) { |
| /* New sg entry */ |
| --num_sgs; |
| sent_len -= block_len; |
| if (num_sgs != 0) { |
| sg = sg_next(sg); |
| block_len = sg_dma_len(sg); |
| addr = (u64)sg_dma_address(sg); |
| addr += sent_len; |
| } |
| } |
| block_len -= sent_len; |
| send_addr = addr; |
| } |
| |
| /* Check TD length */ |
| if (running_total != td_len) { |
| dev_err(pdev->dev, "ISOC TD length unmatch\n"); |
| ret = -EINVAL; |
| goto cleanup; |
| } |
| |
| cdnsp_giveback_first_trb(pdev, preq->pep, preq->request.stream_id, |
| start_cycle, start_trb); |
| |
| return 0; |
| |
| cleanup: |
| /* Clean up a partially enqueued isoc transfer. */ |
| list_del_init(&preq->td.td_list); |
| ep_ring->num_tds--; |
| |
| /* |
| * Use the first TD as a temporary variable to turn the TDs we've |
| * queued into No-ops with a software-owned cycle bit. |
| * That way the hardware won't accidentally start executing bogus TDs |
| * when we partially overwrite them. |
| * td->first_trb and td->start_seg are already set. |
| */ |
| preq->td.last_trb = ep_ring->enqueue; |
| /* Every TRB except the first & last will have its cycle bit flipped. */ |
| cdnsp_td_to_noop(pdev, ep_ring, &preq->td, true); |
| |
| /* Reset the ring enqueue back to the first TRB and its cycle bit. */ |
| ep_ring->enqueue = preq->td.first_trb; |
| ep_ring->enq_seg = preq->td.start_seg; |
| ep_ring->cycle_state = start_cycle; |
| return ret; |
| } |
| |
| /**** Command Ring Operations ****/ |
| /* |
| * Generic function for queuing a command TRB on the command ring. |
| * Driver queue only one command to ring in the moment. |
| */ |
| static void cdnsp_queue_command(struct cdnsp_device *pdev, |
| u32 field1, |
| u32 field2, |
| u32 field3, |
| u32 field4) |
| { |
| cdnsp_prepare_ring(pdev, pdev->cmd_ring, EP_STATE_RUNNING, 1, |
| GFP_ATOMIC); |
| |
| pdev->cmd.command_trb = pdev->cmd_ring->enqueue; |
| |
| cdnsp_queue_trb(pdev, pdev->cmd_ring, false, field1, field2, |
| field3, field4 | pdev->cmd_ring->cycle_state); |
| } |
| |
| /* Queue a slot enable or disable request on the command ring */ |
| void cdnsp_queue_slot_control(struct cdnsp_device *pdev, u32 trb_type) |
| { |
| cdnsp_queue_command(pdev, 0, 0, 0, TRB_TYPE(trb_type) | |
| SLOT_ID_FOR_TRB(pdev->slot_id)); |
| } |
| |
| /* Queue an address device command TRB */ |
| void cdnsp_queue_address_device(struct cdnsp_device *pdev, |
| dma_addr_t in_ctx_ptr, |
| enum cdnsp_setup_dev setup) |
| { |
| cdnsp_queue_command(pdev, lower_32_bits(in_ctx_ptr), |
| upper_32_bits(in_ctx_ptr), 0, |
| TRB_TYPE(TRB_ADDR_DEV) | |
| SLOT_ID_FOR_TRB(pdev->slot_id) | |
| (setup == SETUP_CONTEXT_ONLY ? TRB_BSR : 0)); |
| } |
| |
| /* Queue a reset device command TRB */ |
| void cdnsp_queue_reset_device(struct cdnsp_device *pdev) |
| { |
| cdnsp_queue_command(pdev, 0, 0, 0, TRB_TYPE(TRB_RESET_DEV) | |
| SLOT_ID_FOR_TRB(pdev->slot_id)); |
| } |
| |
| /* Queue a configure endpoint command TRB */ |
| void cdnsp_queue_configure_endpoint(struct cdnsp_device *pdev, |
| dma_addr_t in_ctx_ptr) |
| { |
| cdnsp_queue_command(pdev, lower_32_bits(in_ctx_ptr), |
| upper_32_bits(in_ctx_ptr), 0, |
| TRB_TYPE(TRB_CONFIG_EP) | |
| SLOT_ID_FOR_TRB(pdev->slot_id)); |
| } |
| |
| /* |
| * Suspend is set to indicate "Stop Endpoint Command" is being issued to stop |
| * activity on an endpoint that is about to be suspended. |
| */ |
| void cdnsp_queue_stop_endpoint(struct cdnsp_device *pdev, unsigned int ep_index) |
| { |
| cdnsp_queue_command(pdev, 0, 0, 0, SLOT_ID_FOR_TRB(pdev->slot_id) | |
| EP_ID_FOR_TRB(ep_index) | TRB_TYPE(TRB_STOP_RING)); |
| } |
| |
| /* Set Transfer Ring Dequeue Pointer command. */ |
| void cdnsp_queue_new_dequeue_state(struct cdnsp_device *pdev, |
| struct cdnsp_ep *pep, |
| struct cdnsp_dequeue_state *deq_state) |
| { |
| u32 trb_stream_id = STREAM_ID_FOR_TRB(deq_state->stream_id); |
| u32 trb_slot_id = SLOT_ID_FOR_TRB(pdev->slot_id); |
| u32 type = TRB_TYPE(TRB_SET_DEQ); |
| u32 trb_sct = 0; |
| dma_addr_t addr; |
| |
| addr = cdnsp_trb_virt_to_dma(deq_state->new_deq_seg, |
| deq_state->new_deq_ptr); |
| |
| if (deq_state->stream_id) |
| trb_sct = SCT_FOR_TRB(SCT_PRI_TR); |
| |
| cdnsp_queue_command(pdev, lower_32_bits(addr) | trb_sct | |
| deq_state->new_cycle_state, upper_32_bits(addr), |
| trb_stream_id, trb_slot_id | |
| EP_ID_FOR_TRB(pep->idx) | type); |
| } |
| |
| void cdnsp_queue_reset_ep(struct cdnsp_device *pdev, unsigned int ep_index) |
| { |
| return cdnsp_queue_command(pdev, 0, 0, 0, |
| SLOT_ID_FOR_TRB(pdev->slot_id) | |
| EP_ID_FOR_TRB(ep_index) | |
| TRB_TYPE(TRB_RESET_EP)); |
| } |
| |
| /* |
| * Queue a halt endpoint request on the command ring. |
| */ |
| void cdnsp_queue_halt_endpoint(struct cdnsp_device *pdev, unsigned int ep_index) |
| { |
| cdnsp_queue_command(pdev, 0, 0, 0, TRB_TYPE(TRB_HALT_ENDPOINT) | |
| SLOT_ID_FOR_TRB(pdev->slot_id) | |
| EP_ID_FOR_TRB(ep_index)); |
| } |
| |
| void cdnsp_force_header_wakeup(struct cdnsp_device *pdev, int intf_num) |
| { |
| u32 lo, mid; |
| |
| lo = TRB_FH_TO_PACKET_TYPE(TRB_FH_TR_PACKET) | |
| TRB_FH_TO_DEVICE_ADDRESS(pdev->device_address); |
| mid = TRB_FH_TR_PACKET_DEV_NOT | |
| TRB_FH_TO_NOT_TYPE(TRB_FH_TR_PACKET_FUNCTION_WAKE) | |
| TRB_FH_TO_INTERFACE(intf_num); |
| |
| cdnsp_queue_command(pdev, lo, mid, 0, |
| TRB_TYPE(TRB_FORCE_HEADER) | SET_PORT_ID(2)); |
| } |