| /* |
| * Copyright (C) 2000,2001,2002,2003,2004 Broadcom Corporation |
| * |
| * This program is free software; you can redistribute it and/or |
| * modify it under the terms of the GNU General Public License |
| * as published by the Free Software Foundation; either version 2 |
| * of the License, or (at your option) any later version. |
| * |
| * This program is distributed in the hope that it will be useful, |
| * but WITHOUT ANY WARRANTY; without even the implied warranty of |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| * GNU General Public License for more details. |
| * |
| * You should have received a copy of the GNU General Public License |
| * along with this program; if not, write to the Free Software |
| * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. |
| */ |
| #include <linux/kernel.h> |
| #include <linux/init.h> |
| #include <linux/linkage.h> |
| #include <linux/interrupt.h> |
| #include <linux/spinlock.h> |
| #include <linux/mm.h> |
| #include <linux/slab.h> |
| #include <linux/kernel_stat.h> |
| |
| #include <asm/errno.h> |
| #include <asm/irq_regs.h> |
| #include <asm/signal.h> |
| #include <asm/system.h> |
| #include <asm/io.h> |
| |
| #include <asm/sibyte/bcm1480_regs.h> |
| #include <asm/sibyte/bcm1480_int.h> |
| #include <asm/sibyte/bcm1480_scd.h> |
| |
| #include <asm/sibyte/sb1250_uart.h> |
| #include <asm/sibyte/sb1250.h> |
| |
| /* |
| * These are the routines that handle all the low level interrupt stuff. |
| * Actions handled here are: initialization of the interrupt map, requesting of |
| * interrupt lines by handlers, dispatching if interrupts to handlers, probing |
| * for interrupt lines |
| */ |
| |
| |
| static void end_bcm1480_irq(unsigned int irq); |
| static void enable_bcm1480_irq(unsigned int irq); |
| static void disable_bcm1480_irq(unsigned int irq); |
| static void ack_bcm1480_irq(unsigned int irq); |
| #ifdef CONFIG_SMP |
| static void bcm1480_set_affinity(unsigned int irq, cpumask_t mask); |
| #endif |
| |
| #ifdef CONFIG_PCI |
| extern unsigned long ht_eoi_space; |
| #endif |
| |
| #ifdef CONFIG_KGDB |
| #include <asm/gdb-stub.h> |
| extern void breakpoint(void); |
| static int kgdb_irq; |
| #ifdef CONFIG_GDB_CONSOLE |
| extern void register_gdb_console(void); |
| #endif |
| |
| /* kgdb is on when configured. Pass "nokgdb" kernel arg to turn it off */ |
| static int kgdb_flag = 1; |
| static int __init nokgdb(char *str) |
| { |
| kgdb_flag = 0; |
| return 1; |
| } |
| __setup("nokgdb", nokgdb); |
| |
| /* Default to UART1 */ |
| int kgdb_port = 1; |
| #ifdef CONFIG_SIBYTE_SB1250_DUART |
| extern char sb1250_duart_present[]; |
| #endif |
| #endif |
| |
| static struct irq_chip bcm1480_irq_type = { |
| .name = "BCM1480-IMR", |
| .ack = ack_bcm1480_irq, |
| .mask = disable_bcm1480_irq, |
| .mask_ack = ack_bcm1480_irq, |
| .unmask = enable_bcm1480_irq, |
| .end = end_bcm1480_irq, |
| #ifdef CONFIG_SMP |
| .set_affinity = bcm1480_set_affinity |
| #endif |
| }; |
| |
| /* Store the CPU id (not the logical number) */ |
| int bcm1480_irq_owner[BCM1480_NR_IRQS]; |
| |
| DEFINE_SPINLOCK(bcm1480_imr_lock); |
| |
| void bcm1480_mask_irq(int cpu, int irq) |
| { |
| unsigned long flags; |
| u64 cur_ints,hl_spacing; |
| |
| spin_lock_irqsave(&bcm1480_imr_lock, flags); |
| hl_spacing = 0; |
| if ((irq >= BCM1480_NR_IRQS_HALF) && (irq <= BCM1480_NR_IRQS)) { |
| hl_spacing = BCM1480_IMR_HL_SPACING; |
| irq -= BCM1480_NR_IRQS_HALF; |
| } |
| cur_ints = ____raw_readq(IOADDR(A_BCM1480_IMR_MAPPER(cpu) + R_BCM1480_IMR_INTERRUPT_MASK_H + hl_spacing)); |
| cur_ints |= (((u64) 1) << irq); |
| ____raw_writeq(cur_ints, IOADDR(A_BCM1480_IMR_MAPPER(cpu) + R_BCM1480_IMR_INTERRUPT_MASK_H + hl_spacing)); |
| spin_unlock_irqrestore(&bcm1480_imr_lock, flags); |
| } |
| |
| void bcm1480_unmask_irq(int cpu, int irq) |
| { |
| unsigned long flags; |
| u64 cur_ints,hl_spacing; |
| |
| spin_lock_irqsave(&bcm1480_imr_lock, flags); |
| hl_spacing = 0; |
| if ((irq >= BCM1480_NR_IRQS_HALF) && (irq <= BCM1480_NR_IRQS)) { |
| hl_spacing = BCM1480_IMR_HL_SPACING; |
| irq -= BCM1480_NR_IRQS_HALF; |
| } |
| cur_ints = ____raw_readq(IOADDR(A_BCM1480_IMR_MAPPER(cpu) + R_BCM1480_IMR_INTERRUPT_MASK_H + hl_spacing)); |
| cur_ints &= ~(((u64) 1) << irq); |
| ____raw_writeq(cur_ints, IOADDR(A_BCM1480_IMR_MAPPER(cpu) + R_BCM1480_IMR_INTERRUPT_MASK_H + hl_spacing)); |
| spin_unlock_irqrestore(&bcm1480_imr_lock, flags); |
| } |
| |
| #ifdef CONFIG_SMP |
| static void bcm1480_set_affinity(unsigned int irq, cpumask_t mask) |
| { |
| int i = 0, old_cpu, cpu, int_on, k; |
| u64 cur_ints; |
| struct irq_desc *desc = irq_desc + irq; |
| unsigned long flags; |
| unsigned int irq_dirty; |
| |
| i = first_cpu(mask); |
| if (next_cpu(i, mask) <= NR_CPUS) { |
| printk("attempted to set irq affinity for irq %d to multiple CPUs\n", irq); |
| return; |
| } |
| |
| /* Convert logical CPU to physical CPU */ |
| cpu = cpu_logical_map(i); |
| |
| /* Protect against other affinity changers and IMR manipulation */ |
| spin_lock_irqsave(&desc->lock, flags); |
| spin_lock(&bcm1480_imr_lock); |
| |
| /* Swizzle each CPU's IMR (but leave the IP selection alone) */ |
| old_cpu = bcm1480_irq_owner[irq]; |
| irq_dirty = irq; |
| if ((irq_dirty >= BCM1480_NR_IRQS_HALF) && (irq_dirty <= BCM1480_NR_IRQS)) { |
| irq_dirty -= BCM1480_NR_IRQS_HALF; |
| } |
| |
| for (k=0; k<2; k++) { /* Loop through high and low interrupt mask register */ |
| cur_ints = ____raw_readq(IOADDR(A_BCM1480_IMR_MAPPER(old_cpu) + R_BCM1480_IMR_INTERRUPT_MASK_H + (k*BCM1480_IMR_HL_SPACING))); |
| int_on = !(cur_ints & (((u64) 1) << irq_dirty)); |
| if (int_on) { |
| /* If it was on, mask it */ |
| cur_ints |= (((u64) 1) << irq_dirty); |
| ____raw_writeq(cur_ints, IOADDR(A_BCM1480_IMR_MAPPER(old_cpu) + R_BCM1480_IMR_INTERRUPT_MASK_H + (k*BCM1480_IMR_HL_SPACING))); |
| } |
| bcm1480_irq_owner[irq] = cpu; |
| if (int_on) { |
| /* unmask for the new CPU */ |
| cur_ints = ____raw_readq(IOADDR(A_BCM1480_IMR_MAPPER(cpu) + R_BCM1480_IMR_INTERRUPT_MASK_H + (k*BCM1480_IMR_HL_SPACING))); |
| cur_ints &= ~(((u64) 1) << irq_dirty); |
| ____raw_writeq(cur_ints, IOADDR(A_BCM1480_IMR_MAPPER(cpu) + R_BCM1480_IMR_INTERRUPT_MASK_H + (k*BCM1480_IMR_HL_SPACING))); |
| } |
| } |
| spin_unlock(&bcm1480_imr_lock); |
| spin_unlock_irqrestore(&desc->lock, flags); |
| } |
| #endif |
| |
| |
| /*****************************************************************************/ |
| |
| static void disable_bcm1480_irq(unsigned int irq) |
| { |
| bcm1480_mask_irq(bcm1480_irq_owner[irq], irq); |
| } |
| |
| static void enable_bcm1480_irq(unsigned int irq) |
| { |
| bcm1480_unmask_irq(bcm1480_irq_owner[irq], irq); |
| } |
| |
| |
| static void ack_bcm1480_irq(unsigned int irq) |
| { |
| u64 pending; |
| unsigned int irq_dirty; |
| int k; |
| |
| /* |
| * If the interrupt was an HT interrupt, now is the time to |
| * clear it. NOTE: we assume the HT bridge was set up to |
| * deliver the interrupts to all CPUs (which makes affinity |
| * changing easier for us) |
| */ |
| irq_dirty = irq; |
| if ((irq_dirty >= BCM1480_NR_IRQS_HALF) && (irq_dirty <= BCM1480_NR_IRQS)) { |
| irq_dirty -= BCM1480_NR_IRQS_HALF; |
| } |
| for (k=0; k<2; k++) { /* Loop through high and low LDT interrupts */ |
| pending = __raw_readq(IOADDR(A_BCM1480_IMR_REGISTER(bcm1480_irq_owner[irq], |
| R_BCM1480_IMR_LDT_INTERRUPT_H + (k*BCM1480_IMR_HL_SPACING)))); |
| pending &= ((u64)1 << (irq_dirty)); |
| if (pending) { |
| #ifdef CONFIG_SMP |
| int i; |
| for (i=0; i<NR_CPUS; i++) { |
| /* |
| * Clear for all CPUs so an affinity switch |
| * doesn't find an old status |
| */ |
| __raw_writeq(pending, IOADDR(A_BCM1480_IMR_REGISTER(cpu_logical_map(i), |
| R_BCM1480_IMR_LDT_INTERRUPT_CLR_H + (k*BCM1480_IMR_HL_SPACING)))); |
| } |
| #else |
| __raw_writeq(pending, IOADDR(A_BCM1480_IMR_REGISTER(0, R_BCM1480_IMR_LDT_INTERRUPT_CLR_H + (k*BCM1480_IMR_HL_SPACING)))); |
| #endif |
| |
| /* |
| * Generate EOI. For Pass 1 parts, EOI is a nop. For |
| * Pass 2, the LDT world may be edge-triggered, but |
| * this EOI shouldn't hurt. If they are |
| * level-sensitive, the EOI is required. |
| */ |
| #ifdef CONFIG_PCI |
| if (ht_eoi_space) |
| *(uint32_t *)(ht_eoi_space+(irq<<16)+(7<<2)) = 0; |
| #endif |
| } |
| } |
| bcm1480_mask_irq(bcm1480_irq_owner[irq], irq); |
| } |
| |
| |
| static void end_bcm1480_irq(unsigned int irq) |
| { |
| if (!(irq_desc[irq].status & (IRQ_DISABLED | IRQ_INPROGRESS))) { |
| bcm1480_unmask_irq(bcm1480_irq_owner[irq], irq); |
| } |
| } |
| |
| |
| void __init init_bcm1480_irqs(void) |
| { |
| int i; |
| |
| for (i = 0; i < BCM1480_NR_IRQS; i++) { |
| set_irq_chip(i, &bcm1480_irq_type); |
| bcm1480_irq_owner[i] = 0; |
| } |
| } |
| |
| |
| static irqreturn_t bcm1480_dummy_handler(int irq, void *dev_id) |
| { |
| return IRQ_NONE; |
| } |
| |
| static struct irqaction bcm1480_dummy_action = { |
| .handler = bcm1480_dummy_handler, |
| .flags = 0, |
| .mask = CPU_MASK_NONE, |
| .name = "bcm1480-private", |
| .next = NULL, |
| .dev_id = 0 |
| }; |
| |
| int bcm1480_steal_irq(int irq) |
| { |
| struct irq_desc *desc = irq_desc + irq; |
| unsigned long flags; |
| int retval = 0; |
| |
| if (irq >= BCM1480_NR_IRQS) |
| return -EINVAL; |
| |
| spin_lock_irqsave(&desc->lock,flags); |
| /* Don't allow sharing at all for these */ |
| if (desc->action != NULL) |
| retval = -EBUSY; |
| else { |
| desc->action = &bcm1480_dummy_action; |
| desc->depth = 0; |
| } |
| spin_unlock_irqrestore(&desc->lock,flags); |
| return 0; |
| } |
| |
| /* |
| * init_IRQ is called early in the boot sequence from init/main.c. It |
| * is responsible for setting up the interrupt mapper and installing the |
| * handler that will be responsible for dispatching interrupts to the |
| * "right" place. |
| */ |
| /* |
| * For now, map all interrupts to IP[2]. We could save |
| * some cycles by parceling out system interrupts to different |
| * IP lines, but keep it simple for bringup. We'll also direct |
| * all interrupts to a single CPU; we should probably route |
| * PCI and LDT to one cpu and everything else to the other |
| * to balance the load a bit. |
| * |
| * On the second cpu, everything is set to IP5, which is |
| * ignored, EXCEPT the mailbox interrupt. That one is |
| * set to IP[2] so it is handled. This is needed so we |
| * can do cross-cpu function calls, as requred by SMP |
| */ |
| |
| #define IMR_IP2_VAL K_BCM1480_INT_MAP_I0 |
| #define IMR_IP3_VAL K_BCM1480_INT_MAP_I1 |
| #define IMR_IP4_VAL K_BCM1480_INT_MAP_I2 |
| #define IMR_IP5_VAL K_BCM1480_INT_MAP_I3 |
| #define IMR_IP6_VAL K_BCM1480_INT_MAP_I4 |
| |
| void __init arch_init_irq(void) |
| { |
| |
| unsigned int i, cpu; |
| u64 tmp; |
| unsigned int imask = STATUSF_IP4 | STATUSF_IP3 | STATUSF_IP2 | |
| STATUSF_IP1 | STATUSF_IP0; |
| |
| /* Default everything to IP2 */ |
| /* Start with _high registers which has no bit 0 interrupt source */ |
| for (i = 1; i < BCM1480_NR_IRQS_HALF; i++) { /* was I0 */ |
| for (cpu = 0; cpu < 4; cpu++) { |
| __raw_writeq(IMR_IP2_VAL, |
| IOADDR(A_BCM1480_IMR_REGISTER(cpu, |
| R_BCM1480_IMR_INTERRUPT_MAP_BASE_H) + (i << 3))); |
| } |
| } |
| |
| /* Now do _low registers */ |
| for (i = 0; i < BCM1480_NR_IRQS_HALF; i++) { |
| for (cpu = 0; cpu < 4; cpu++) { |
| __raw_writeq(IMR_IP2_VAL, |
| IOADDR(A_BCM1480_IMR_REGISTER(cpu, |
| R_BCM1480_IMR_INTERRUPT_MAP_BASE_L) + (i << 3))); |
| } |
| } |
| |
| init_bcm1480_irqs(); |
| |
| /* |
| * Map the high 16 bits of mailbox_0 registers to IP[3], for |
| * inter-cpu messages |
| */ |
| /* Was I1 */ |
| for (cpu = 0; cpu < 4; cpu++) { |
| __raw_writeq(IMR_IP3_VAL, IOADDR(A_BCM1480_IMR_REGISTER(cpu, R_BCM1480_IMR_INTERRUPT_MAP_BASE_H) + |
| (K_BCM1480_INT_MBOX_0_0 << 3))); |
| } |
| |
| |
| /* Clear the mailboxes. The firmware may leave them dirty */ |
| for (cpu = 0; cpu < 4; cpu++) { |
| __raw_writeq(0xffffffffffffffffULL, |
| IOADDR(A_BCM1480_IMR_REGISTER(cpu, R_BCM1480_IMR_MAILBOX_0_CLR_CPU))); |
| __raw_writeq(0xffffffffffffffffULL, |
| IOADDR(A_BCM1480_IMR_REGISTER(cpu, R_BCM1480_IMR_MAILBOX_1_CLR_CPU))); |
| } |
| |
| |
| /* Mask everything except the high 16 bit of mailbox_0 registers for all cpus */ |
| tmp = ~((u64) 0) ^ ( (((u64) 1) << K_BCM1480_INT_MBOX_0_0)); |
| for (cpu = 0; cpu < 4; cpu++) { |
| __raw_writeq(tmp, IOADDR(A_BCM1480_IMR_REGISTER(cpu, R_BCM1480_IMR_INTERRUPT_MASK_H))); |
| } |
| tmp = ~((u64) 0); |
| for (cpu = 0; cpu < 4; cpu++) { |
| __raw_writeq(tmp, IOADDR(A_BCM1480_IMR_REGISTER(cpu, R_BCM1480_IMR_INTERRUPT_MASK_L))); |
| } |
| |
| bcm1480_steal_irq(K_BCM1480_INT_MBOX_0_0); |
| |
| /* |
| * Note that the timer interrupts are also mapped, but this is |
| * done in bcm1480_time_init(). Also, the profiling driver |
| * does its own management of IP7. |
| */ |
| |
| #ifdef CONFIG_KGDB |
| imask |= STATUSF_IP6; |
| #endif |
| /* Enable necessary IPs, disable the rest */ |
| change_c0_status(ST0_IM, imask); |
| |
| #ifdef CONFIG_KGDB |
| if (kgdb_flag) { |
| kgdb_irq = K_BCM1480_INT_UART_0 + kgdb_port; |
| |
| #ifdef CONFIG_SIBYTE_SB1250_DUART |
| sb1250_duart_present[kgdb_port] = 0; |
| #endif |
| /* Setup uart 1 settings, mapper */ |
| /* QQQ FIXME */ |
| __raw_writeq(M_DUART_IMR_BRK, IO_SPACE_BASE + A_DUART_IMRREG(kgdb_port)); |
| |
| bcm1480_steal_irq(kgdb_irq); |
| __raw_writeq(IMR_IP6_VAL, |
| IO_SPACE_BASE + A_BCM1480_IMR_REGISTER(0, R_BCM1480_IMR_INTERRUPT_MAP_BASE_H) + |
| (kgdb_irq<<3)); |
| bcm1480_unmask_irq(0, kgdb_irq); |
| |
| #ifdef CONFIG_GDB_CONSOLE |
| register_gdb_console(); |
| #endif |
| prom_printf("Waiting for GDB on UART port %d\n", kgdb_port); |
| set_debug_traps(); |
| breakpoint(); |
| } |
| #endif |
| } |
| |
| #ifdef CONFIG_KGDB |
| |
| #include <linux/delay.h> |
| |
| #define duart_out(reg, val) csr_out32(val, IOADDR(A_DUART_CHANREG(kgdb_port,reg))) |
| #define duart_in(reg) csr_in32(IOADDR(A_DUART_CHANREG(kgdb_port,reg))) |
| |
| static void bcm1480_kgdb_interrupt(void) |
| { |
| /* |
| * Clear break-change status (allow some time for the remote |
| * host to stop the break, since we would see another |
| * interrupt on the end-of-break too) |
| */ |
| kstat.irqs[smp_processor_id()][kgdb_irq]++; |
| mdelay(500); |
| duart_out(R_DUART_CMD, V_DUART_MISC_CMD_RESET_BREAK_INT | |
| M_DUART_RX_EN | M_DUART_TX_EN); |
| set_async_breakpoint(&get_irq_regs()->cp0_epc); |
| } |
| |
| #endif /* CONFIG_KGDB */ |
| |
| extern void bcm1480_timer_interrupt(void); |
| extern void bcm1480_mailbox_interrupt(void); |
| |
| asmlinkage void plat_irq_dispatch(void) |
| { |
| unsigned int pending; |
| |
| #ifdef CONFIG_SIBYTE_BCM1480_PROF |
| /* Set compare to count to silence count/compare timer interrupts */ |
| write_c0_compare(read_c0_count()); |
| #endif |
| |
| pending = read_c0_cause() & read_c0_status(); |
| |
| #ifdef CONFIG_SIBYTE_BCM1480_PROF |
| if (pending & CAUSEF_IP7) /* Cpu performance counter interrupt */ |
| sbprof_cpu_intr(); |
| else |
| #endif |
| |
| if (pending & CAUSEF_IP4) |
| bcm1480_timer_interrupt(); |
| |
| #ifdef CONFIG_SMP |
| else if (pending & CAUSEF_IP3) |
| bcm1480_mailbox_interrupt(); |
| #endif |
| |
| #ifdef CONFIG_KGDB |
| else if (pending & CAUSEF_IP6) |
| bcm1480_kgdb_interrupt(); /* KGDB (uart 1) */ |
| #endif |
| |
| else if (pending & CAUSEF_IP2) { |
| unsigned long long mask_h, mask_l; |
| unsigned long base; |
| |
| /* |
| * Default...we've hit an IP[2] interrupt, which means we've |
| * got to check the 1480 interrupt registers to figure out what |
| * to do. Need to detect which CPU we're on, now that |
| * smp_affinity is supported. |
| */ |
| base = A_BCM1480_IMR_MAPPER(smp_processor_id()); |
| mask_h = __raw_readq( |
| IOADDR(base + R_BCM1480_IMR_INTERRUPT_STATUS_BASE_H)); |
| mask_l = __raw_readq( |
| IOADDR(base + R_BCM1480_IMR_INTERRUPT_STATUS_BASE_L)); |
| |
| if (mask_h) { |
| if (mask_h ^ 1) |
| do_IRQ(fls64(mask_h) - 1); |
| else |
| do_IRQ(63 + fls64(mask_l)); |
| } |
| } |
| } |