| # SPDX-License-Identifier: GPL-2.0 |
| %YAML 1.2 |
| --- |
| $id: http://devicetree.org/schemas/net/ethernet-controller.yaml# |
| $schema: http://devicetree.org/meta-schemas/core.yaml# |
| |
| title: Ethernet Controller Common Properties |
| |
| maintainers: |
| - David S. Miller <davem@davemloft.net> |
| |
| properties: |
| $nodename: |
| pattern: "^ethernet(@.*)?$" |
| |
| label: |
| $ref: /schemas/types.yaml#/definitions/string |
| description: Human readable label on a port of a box. |
| |
| local-mac-address: |
| description: |
| Specifies the MAC address that was assigned to the network device. |
| $ref: /schemas/types.yaml#/definitions/uint8-array |
| minItems: 6 |
| maxItems: 6 |
| |
| mac-address: |
| description: |
| Specifies the MAC address that was last used by the boot |
| program; should be used in cases where the MAC address assigned |
| to the device by the boot program is different from the |
| local-mac-address property. |
| $ref: /schemas/types.yaml#/definitions/uint8-array |
| minItems: 6 |
| maxItems: 6 |
| |
| max-frame-size: |
| $ref: /schemas/types.yaml#/definitions/uint32 |
| description: |
| Maximum transfer unit (IEEE defined MTU), rather than the |
| maximum frame size (there\'s contradiction in the Devicetree |
| Specification). |
| |
| max-speed: |
| $ref: /schemas/types.yaml#/definitions/uint32 |
| description: |
| Specifies maximum speed in Mbit/s supported by the device. |
| |
| nvmem-cells: |
| maxItems: 1 |
| description: |
| Reference to an nvmem node for the MAC address |
| |
| nvmem-cell-names: |
| const: mac-address |
| |
| phy-connection-type: |
| description: |
| Specifies interface type between the Ethernet device and a physical |
| layer (PHY) device. |
| enum: |
| # There is not a standard bus between the MAC and the PHY, |
| # something proprietary is being used to embed the PHY in the |
| # MAC. |
| - internal |
| - mii |
| - gmii |
| - sgmii |
| - psgmii |
| - qsgmii |
| - qusgmii |
| - tbi |
| - rev-mii |
| - rmii |
| - rev-rmii |
| - moca |
| |
| # RX and TX delays are added by the MAC when required |
| - rgmii |
| |
| # RGMII with internal RX and TX delays provided by the PHY, |
| # the MAC should not add the RX or TX delays in this case |
| - rgmii-id |
| |
| # RGMII with internal RX delay provided by the PHY, the MAC |
| # should not add an RX delay in this case |
| - rgmii-rxid |
| |
| # RGMII with internal TX delay provided by the PHY, the MAC |
| # should not add an TX delay in this case |
| - rgmii-txid |
| - rtbi |
| - smii |
| - xgmii |
| - trgmii |
| - 1000base-x |
| - 2500base-x |
| - 5gbase-r |
| - rxaui |
| - xaui |
| |
| # 10GBASE-KR, XFI, SFI |
| - 10gbase-kr |
| - usxgmii |
| - 10gbase-r |
| - 25gbase-r |
| |
| phy-mode: |
| $ref: "#/properties/phy-connection-type" |
| |
| pcs-handle: |
| $ref: /schemas/types.yaml#/definitions/phandle-array |
| items: |
| maxItems: 1 |
| description: |
| Specifies a reference to a node representing a PCS PHY device on a MDIO |
| bus to link with an external PHY (phy-handle) if exists. |
| |
| pcs-handle-names: |
| description: |
| The name of each PCS in pcs-handle. |
| |
| phy-handle: |
| $ref: /schemas/types.yaml#/definitions/phandle |
| description: |
| Specifies a reference to a node representing a PHY device. |
| |
| phy: |
| $ref: "#/properties/phy-handle" |
| deprecated: true |
| |
| phy-device: |
| $ref: "#/properties/phy-handle" |
| deprecated: true |
| |
| rx-fifo-depth: |
| $ref: /schemas/types.yaml#/definitions/uint32 |
| description: |
| The size of the controller\'s receive fifo in bytes. This is used |
| for components that can have configurable receive fifo sizes, |
| and is useful for determining certain configuration settings |
| such as flow control thresholds. |
| |
| sfp: |
| $ref: /schemas/types.yaml#/definitions/phandle |
| description: |
| Specifies a reference to a node representing a SFP cage. |
| |
| tx-fifo-depth: |
| $ref: /schemas/types.yaml#/definitions/uint32 |
| description: |
| The size of the controller\'s transmit fifo in bytes. This |
| is used for components that can have configurable fifo sizes. |
| |
| managed: |
| description: |
| Specifies the PHY management type. If auto is set and fixed-link |
| is not specified, it uses MDIO for management. |
| $ref: /schemas/types.yaml#/definitions/string |
| default: auto |
| enum: |
| - auto |
| - in-band-status |
| |
| fixed-link: |
| oneOf: |
| - $ref: /schemas/types.yaml#/definitions/uint32-array |
| deprecated: true |
| items: |
| - minimum: 0 |
| maximum: 31 |
| description: |
| Emulated PHY ID, choose any but unique to the all |
| specified fixed-links |
| |
| - enum: [0, 1] |
| description: |
| Duplex configuration. 0 for half duplex or 1 for |
| full duplex |
| |
| - enum: [10, 100, 1000, 2500, 10000] |
| description: |
| Link speed in Mbits/sec. |
| |
| - enum: [0, 1] |
| description: |
| Pause configuration. 0 for no pause, 1 for pause |
| |
| - enum: [0, 1] |
| description: |
| Asymmetric pause configuration. 0 for no asymmetric |
| pause, 1 for asymmetric pause |
| - type: object |
| additionalProperties: false |
| properties: |
| speed: |
| description: |
| Link speed. |
| $ref: /schemas/types.yaml#/definitions/uint32 |
| enum: [10, 100, 1000, 2500, 10000] |
| |
| full-duplex: |
| $ref: /schemas/types.yaml#/definitions/flag |
| description: |
| Indicates that full-duplex is used. When absent, half |
| duplex is assumed. |
| |
| pause: |
| $ref: /schemas/types.yaml#/definitions/flag |
| description: |
| Indicates that pause should be enabled. |
| |
| asym-pause: |
| $ref: /schemas/types.yaml#/definitions/flag |
| description: |
| Indicates that asym_pause should be enabled. |
| |
| link-gpios: |
| maxItems: 1 |
| description: |
| GPIO to determine if the link is up |
| |
| required: |
| - speed |
| |
| leds: |
| description: |
| Describes the LEDs associated by Ethernet Controller. |
| These LEDs are not integrated in the PHY and PHY doesn't have any |
| control on them. Ethernet Controller regs are used to control |
| these defined LEDs. |
| |
| type: object |
| |
| properties: |
| '#address-cells': |
| const: 1 |
| |
| '#size-cells': |
| const: 0 |
| |
| patternProperties: |
| '^led@[a-f0-9]+$': |
| $ref: /schemas/leds/common.yaml# |
| |
| properties: |
| reg: |
| maxItems: 1 |
| description: |
| This define the LED index in the PHY or the MAC. It's really |
| driver dependent and required for ports that define multiple |
| LED for the same port. |
| |
| required: |
| - reg |
| |
| unevaluatedProperties: false |
| |
| additionalProperties: false |
| |
| dependencies: |
| pcs-handle-names: [pcs-handle] |
| |
| allOf: |
| - if: |
| properties: |
| phy-mode: |
| contains: |
| enum: |
| - rgmii |
| - rgmii-rxid |
| - rgmii-txid |
| - rgmii-id |
| then: |
| properties: |
| rx-internal-delay-ps: |
| description: |
| RGMII Receive Clock Delay defined in pico seconds.This is used for |
| controllers that have configurable RX internal delays. If this |
| property is present then the MAC applies the RX delay. |
| tx-internal-delay-ps: |
| description: |
| RGMII Transmit Clock Delay defined in pico seconds.This is used for |
| controllers that have configurable TX internal delays. If this |
| property is present then the MAC applies the TX delay. |
| |
| additionalProperties: true |
| |
| ... |
