| * Dialog Semiconductor DA9062/61 Watchdog Timer |
| |
| Required properties: |
| |
| - compatible: should be one of the following valid compatible string lines: |
| "dlg,da9061-watchdog", "dlg,da9062-watchdog" |
| "dlg,da9062-watchdog" |
| |
| Optional properties: |
| - dlg,use-sw-pm: Add this property to disable the watchdog during suspend. |
| Only use this option if you can't use the watchdog automatic suspend |
| function during a suspend (see register CONTROL_B). |
| - dlg,wdt-sd: Set what happens on watchdog timeout. If this bit is set the |
| watchdog timeout triggers SHUTDOWN, if cleared the watchdog triggers |
| POWERDOWN. Can be 0 or 1. Only use this option if you want to change the |
| default chip's OTP setting for WATCHDOG_SD bit. If this property is NOT |
| set the WATCHDOG_SD bit and on timeout watchdog behavior will match the |
| chip's OTP settings. |
| |
| Example: DA9062 |
| |
| pmic0: da9062@58 { |
| watchdog { |
| compatible = "dlg,da9062-watchdog"; |
| }; |
| }; |
| |
| Example: DA9061 using a fall-back compatible for the DA9062 watchdog driver |
| |
| pmic0: da9061@58 { |
| watchdog { |
| compatible = "dlg,da9061-watchdog", "dlg,da9062-watchdog"; |
| }; |
| }; |
