| // SPDX-License-Identifier: (GPL-2.0+ OR MIT) |
| /* |
| * Copyright 2019 NXP |
| */ |
| |
| #include <dt-bindings/clock/imx8mm-clock.h> |
| #include <dt-bindings/gpio/gpio.h> |
| #include <dt-bindings/input/input.h> |
| #include <dt-bindings/interrupt-controller/arm-gic.h> |
| #include <dt-bindings/power/imx8mm-power.h> |
| #include <dt-bindings/reset/imx8mq-reset.h> |
| #include <dt-bindings/thermal/thermal.h> |
| |
| #include "imx8mm-pinfunc.h" |
| |
| / { |
| interrupt-parent = <&gic>; |
| #address-cells = <2>; |
| #size-cells = <2>; |
| |
| aliases { |
| ethernet0 = &fec1; |
| gpio0 = &gpio1; |
| gpio1 = &gpio2; |
| gpio2 = &gpio3; |
| gpio3 = &gpio4; |
| gpio4 = &gpio5; |
| i2c0 = &i2c1; |
| i2c1 = &i2c2; |
| i2c2 = &i2c3; |
| i2c3 = &i2c4; |
| mmc0 = &usdhc1; |
| mmc1 = &usdhc2; |
| mmc2 = &usdhc3; |
| serial0 = &uart1; |
| serial1 = &uart2; |
| serial2 = &uart3; |
| serial3 = &uart4; |
| spi0 = &ecspi1; |
| spi1 = &ecspi2; |
| spi2 = &ecspi3; |
| }; |
| |
| cpus { |
| #address-cells = <1>; |
| #size-cells = <0>; |
| |
| idle-states { |
| entry-method = "psci"; |
| |
| cpu_pd_wait: cpu-pd-wait { |
| compatible = "arm,idle-state"; |
| arm,psci-suspend-param = <0x0010033>; |
| local-timer-stop; |
| entry-latency-us = <1000>; |
| exit-latency-us = <700>; |
| min-residency-us = <2700>; |
| }; |
| }; |
| |
| A53_0: cpu@0 { |
| device_type = "cpu"; |
| compatible = "arm,cortex-a53"; |
| reg = <0x0>; |
| clock-latency = <61036>; /* two CLK32 periods */ |
| clocks = <&clk IMX8MM_CLK_ARM>; |
| enable-method = "psci"; |
| i-cache-size = <0x8000>; |
| i-cache-line-size = <64>; |
| i-cache-sets = <256>; |
| d-cache-size = <0x8000>; |
| d-cache-line-size = <64>; |
| d-cache-sets = <128>; |
| next-level-cache = <&A53_L2>; |
| operating-points-v2 = <&a53_opp_table>; |
| nvmem-cells = <&cpu_speed_grade>; |
| nvmem-cell-names = "speed_grade"; |
| cpu-idle-states = <&cpu_pd_wait>; |
| #cooling-cells = <2>; |
| }; |
| |
| A53_1: cpu@1 { |
| device_type = "cpu"; |
| compatible = "arm,cortex-a53"; |
| reg = <0x1>; |
| clock-latency = <61036>; /* two CLK32 periods */ |
| clocks = <&clk IMX8MM_CLK_ARM>; |
| enable-method = "psci"; |
| i-cache-size = <0x8000>; |
| i-cache-line-size = <64>; |
| i-cache-sets = <256>; |
| d-cache-size = <0x8000>; |
| d-cache-line-size = <64>; |
| d-cache-sets = <128>; |
| next-level-cache = <&A53_L2>; |
| operating-points-v2 = <&a53_opp_table>; |
| cpu-idle-states = <&cpu_pd_wait>; |
| #cooling-cells = <2>; |
| }; |
| |
| A53_2: cpu@2 { |
| device_type = "cpu"; |
| compatible = "arm,cortex-a53"; |
| reg = <0x2>; |
| clock-latency = <61036>; /* two CLK32 periods */ |
| clocks = <&clk IMX8MM_CLK_ARM>; |
| enable-method = "psci"; |
| i-cache-size = <0x8000>; |
| i-cache-line-size = <64>; |
| i-cache-sets = <256>; |
| d-cache-size = <0x8000>; |
| d-cache-line-size = <64>; |
| d-cache-sets = <128>; |
| next-level-cache = <&A53_L2>; |
| operating-points-v2 = <&a53_opp_table>; |
| cpu-idle-states = <&cpu_pd_wait>; |
| #cooling-cells = <2>; |
| }; |
| |
| A53_3: cpu@3 { |
| device_type = "cpu"; |
| compatible = "arm,cortex-a53"; |
| reg = <0x3>; |
| clock-latency = <61036>; /* two CLK32 periods */ |
| clocks = <&clk IMX8MM_CLK_ARM>; |
| enable-method = "psci"; |
| i-cache-size = <0x8000>; |
| i-cache-line-size = <64>; |
| i-cache-sets = <256>; |
| d-cache-size = <0x8000>; |
| d-cache-line-size = <64>; |
| d-cache-sets = <128>; |
| next-level-cache = <&A53_L2>; |
| operating-points-v2 = <&a53_opp_table>; |
| cpu-idle-states = <&cpu_pd_wait>; |
| #cooling-cells = <2>; |
| }; |
| |
| A53_L2: l2-cache0 { |
| compatible = "cache"; |
| cache-level = <2>; |
| cache-unified; |
| cache-size = <0x80000>; |
| cache-line-size = <64>; |
| cache-sets = <512>; |
| }; |
| }; |
| |
| a53_opp_table: opp-table { |
| compatible = "operating-points-v2"; |
| opp-shared; |
| |
| opp-1200000000 { |
| opp-hz = /bits/ 64 <1200000000>; |
| opp-microvolt = <850000>; |
| opp-supported-hw = <0xe>, <0x7>; |
| clock-latency-ns = <150000>; |
| opp-suspend; |
| }; |
| |
| opp-1600000000 { |
| opp-hz = /bits/ 64 <1600000000>; |
| opp-microvolt = <950000>; |
| opp-supported-hw = <0xc>, <0x7>; |
| clock-latency-ns = <150000>; |
| opp-suspend; |
| }; |
| |
| opp-1800000000 { |
| opp-hz = /bits/ 64 <1800000000>; |
| opp-microvolt = <1000000>; |
| opp-supported-hw = <0x8>, <0x3>; |
| clock-latency-ns = <150000>; |
| opp-suspend; |
| }; |
| }; |
| |
| osc_32k: clock-osc-32k { |
| compatible = "fixed-clock"; |
| #clock-cells = <0>; |
| clock-frequency = <32768>; |
| clock-output-names = "osc_32k"; |
| }; |
| |
| osc_24m: clock-osc-24m { |
| compatible = "fixed-clock"; |
| #clock-cells = <0>; |
| clock-frequency = <24000000>; |
| clock-output-names = "osc_24m"; |
| }; |
| |
| clk_ext1: clock-ext1 { |
| compatible = "fixed-clock"; |
| #clock-cells = <0>; |
| clock-frequency = <133000000>; |
| clock-output-names = "clk_ext1"; |
| }; |
| |
| clk_ext2: clock-ext2 { |
| compatible = "fixed-clock"; |
| #clock-cells = <0>; |
| clock-frequency = <133000000>; |
| clock-output-names = "clk_ext2"; |
| }; |
| |
| clk_ext3: clock-ext3 { |
| compatible = "fixed-clock"; |
| #clock-cells = <0>; |
| clock-frequency = <133000000>; |
| clock-output-names = "clk_ext3"; |
| }; |
| |
| clk_ext4: clock-ext4 { |
| compatible = "fixed-clock"; |
| #clock-cells = <0>; |
| clock-frequency = <133000000>; |
| clock-output-names = "clk_ext4"; |
| }; |
| |
| psci { |
| compatible = "arm,psci-1.0"; |
| method = "smc"; |
| }; |
| |
| pmu { |
| compatible = "arm,cortex-a53-pmu"; |
| interrupts = <GIC_PPI 7 |
| (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>; |
| }; |
| |
| timer { |
| compatible = "arm,armv8-timer"; |
| interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>, /* Physical Secure */ |
| <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>, /* Physical Non-Secure */ |
| <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>, /* Virtual */ |
| <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>; /* Hypervisor */ |
| clock-frequency = <8000000>; |
| arm,no-tick-in-suspend; |
| }; |
| |
| thermal-zones { |
| cpu-thermal { |
| polling-delay-passive = <250>; |
| polling-delay = <2000>; |
| thermal-sensors = <&tmu>; |
| trips { |
| cpu_alert0: trip0 { |
| temperature = <85000>; |
| hysteresis = <2000>; |
| type = "passive"; |
| }; |
| |
| cpu_crit0: trip1 { |
| temperature = <95000>; |
| hysteresis = <2000>; |
| type = "critical"; |
| }; |
| }; |
| |
| cooling-maps { |
| map0 { |
| trip = <&cpu_alert0>; |
| cooling-device = |
| <&A53_0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, |
| <&A53_1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, |
| <&A53_2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, |
| <&A53_3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; |
| }; |
| }; |
| }; |
| }; |
| |
| usbphynop1: usbphynop1 { |
| #phy-cells = <0>; |
| compatible = "usb-nop-xceiv"; |
| clocks = <&clk IMX8MM_CLK_USB_PHY_REF>; |
| assigned-clocks = <&clk IMX8MM_CLK_USB_PHY_REF>; |
| assigned-clock-parents = <&clk IMX8MM_SYS_PLL1_100M>; |
| clock-names = "main_clk"; |
| power-domains = <&pgc_otg1>; |
| }; |
| |
| usbphynop2: usbphynop2 { |
| #phy-cells = <0>; |
| compatible = "usb-nop-xceiv"; |
| clocks = <&clk IMX8MM_CLK_USB_PHY_REF>; |
| assigned-clocks = <&clk IMX8MM_CLK_USB_PHY_REF>; |
| assigned-clock-parents = <&clk IMX8MM_SYS_PLL1_100M>; |
| clock-names = "main_clk"; |
| power-domains = <&pgc_otg2>; |
| }; |
| |
| soc: soc@0 { |
| compatible = "fsl,imx8mm-soc", "simple-bus"; |
| #address-cells = <1>; |
| #size-cells = <1>; |
| ranges = <0x0 0x0 0x0 0x3e000000>; |
| dma-ranges = <0x40000000 0x0 0x40000000 0xc0000000>; |
| nvmem-cells = <&imx8mm_uid>; |
| nvmem-cell-names = "soc_unique_id"; |
| |
| aips1: bus@30000000 { |
| compatible = "fsl,aips-bus", "simple-bus"; |
| reg = <0x30000000 0x400000>; |
| #address-cells = <1>; |
| #size-cells = <1>; |
| ranges = <0x30000000 0x30000000 0x400000>; |
| |
| spba2: spba-bus@30000000 { |
| compatible = "fsl,spba-bus", "simple-bus"; |
| #address-cells = <1>; |
| #size-cells = <1>; |
| reg = <0x30000000 0x100000>; |
| ranges; |
| |
| sai1: sai@30010000 { |
| #sound-dai-cells = <0>; |
| compatible = "fsl,imx8mm-sai", "fsl,imx8mq-sai"; |
| reg = <0x30010000 0x10000>; |
| interrupts = <GIC_SPI 95 IRQ_TYPE_LEVEL_HIGH>; |
| clocks = <&clk IMX8MM_CLK_SAI1_IPG>, |
| <&clk IMX8MM_CLK_SAI1_ROOT>, |
| <&clk IMX8MM_CLK_DUMMY>, <&clk IMX8MM_CLK_DUMMY>; |
| clock-names = "bus", "mclk1", "mclk2", "mclk3"; |
| dmas = <&sdma2 0 2 0>, <&sdma2 1 2 0>; |
| dma-names = "rx", "tx"; |
| status = "disabled"; |
| }; |
| |
| sai2: sai@30020000 { |
| #sound-dai-cells = <0>; |
| compatible = "fsl,imx8mm-sai", "fsl,imx8mq-sai"; |
| reg = <0x30020000 0x10000>; |
| interrupts = <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>; |
| clocks = <&clk IMX8MM_CLK_SAI2_IPG>, |
| <&clk IMX8MM_CLK_SAI2_ROOT>, |
| <&clk IMX8MM_CLK_DUMMY>, <&clk IMX8MM_CLK_DUMMY>; |
| clock-names = "bus", "mclk1", "mclk2", "mclk3"; |
| dmas = <&sdma2 2 2 0>, <&sdma2 3 2 0>; |
| dma-names = "rx", "tx"; |
| status = "disabled"; |
| }; |
| |
| sai3: sai@30030000 { |
| #sound-dai-cells = <0>; |
| compatible = "fsl,imx8mm-sai", "fsl,imx8mq-sai"; |
| reg = <0x30030000 0x10000>; |
| interrupts = <GIC_SPI 50 IRQ_TYPE_LEVEL_HIGH>; |
| clocks = <&clk IMX8MM_CLK_SAI3_IPG>, |
| <&clk IMX8MM_CLK_SAI3_ROOT>, |
| <&clk IMX8MM_CLK_DUMMY>, <&clk IMX8MM_CLK_DUMMY>; |
| clock-names = "bus", "mclk1", "mclk2", "mclk3"; |
| dmas = <&sdma2 4 2 0>, <&sdma2 5 2 0>; |
| dma-names = "rx", "tx"; |
| status = "disabled"; |
| }; |
| |
| sai5: sai@30050000 { |
| #sound-dai-cells = <0>; |
| compatible = "fsl,imx8mm-sai", "fsl,imx8mq-sai"; |
| reg = <0x30050000 0x10000>; |
| interrupts = <GIC_SPI 90 IRQ_TYPE_LEVEL_HIGH>; |
| clocks = <&clk IMX8MM_CLK_SAI5_IPG>, |
| <&clk IMX8MM_CLK_SAI5_ROOT>, |
| <&clk IMX8MM_CLK_DUMMY>, <&clk IMX8MM_CLK_DUMMY>; |
| clock-names = "bus", "mclk1", "mclk2", "mclk3"; |
| dmas = <&sdma2 8 2 0>, <&sdma2 9 2 0>; |
| dma-names = "rx", "tx"; |
| status = "disabled"; |
| }; |
| |
| sai6: sai@30060000 { |
| #sound-dai-cells = <0>; |
| compatible = "fsl,imx8mm-sai", "fsl,imx8mq-sai"; |
| reg = <0x30060000 0x10000>; |
| interrupts = <GIC_SPI 90 IRQ_TYPE_LEVEL_HIGH>; |
| clocks = <&clk IMX8MM_CLK_SAI6_IPG>, |
| <&clk IMX8MM_CLK_SAI6_ROOT>, |
| <&clk IMX8MM_CLK_DUMMY>, <&clk IMX8MM_CLK_DUMMY>; |
| clock-names = "bus", "mclk1", "mclk2", "mclk3"; |
| dmas = <&sdma2 10 2 0>, <&sdma2 11 2 0>; |
| dma-names = "rx", "tx"; |
| status = "disabled"; |
| }; |
| |
| micfil: audio-controller@30080000 { |
| compatible = "fsl,imx8mm-micfil"; |
| reg = <0x30080000 0x10000>; |
| interrupts = <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 44 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 45 IRQ_TYPE_LEVEL_HIGH>; |
| clocks = <&clk IMX8MM_CLK_PDM_IPG>, |
| <&clk IMX8MM_CLK_PDM_ROOT>, |
| <&clk IMX8MM_AUDIO_PLL1_OUT>, |
| <&clk IMX8MM_AUDIO_PLL2_OUT>, |
| <&clk IMX8MM_CLK_EXT3>; |
| clock-names = "ipg_clk", "ipg_clk_app", |
| "pll8k", "pll11k", "clkext3"; |
| dmas = <&sdma2 24 25 0x80000000>; |
| dma-names = "rx"; |
| status = "disabled"; |
| }; |
| |
| spdif1: spdif@30090000 { |
| compatible = "fsl,imx35-spdif"; |
| reg = <0x30090000 0x10000>; |
| interrupts = <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>; |
| clocks = <&clk IMX8MM_CLK_AUDIO_AHB>, /* core */ |
| <&clk IMX8MM_CLK_24M>, /* rxtx0 */ |
| <&clk IMX8MM_CLK_SPDIF1>, /* rxtx1 */ |
| <&clk IMX8MM_CLK_DUMMY>, /* rxtx2 */ |
| <&clk IMX8MM_CLK_DUMMY>, /* rxtx3 */ |
| <&clk IMX8MM_CLK_DUMMY>, /* rxtx4 */ |
| <&clk IMX8MM_CLK_AUDIO_AHB>, /* rxtx5 */ |
| <&clk IMX8MM_CLK_DUMMY>, /* rxtx6 */ |
| <&clk IMX8MM_CLK_DUMMY>, /* rxtx7 */ |
| <&clk IMX8MM_CLK_DUMMY>; /* spba */ |
| clock-names = "core", "rxtx0", |
| "rxtx1", "rxtx2", |
| "rxtx3", "rxtx4", |
| "rxtx5", "rxtx6", |
| "rxtx7", "spba"; |
| dmas = <&sdma2 28 18 0>, <&sdma2 29 18 0>; |
| dma-names = "rx", "tx"; |
| status = "disabled"; |
| }; |
| }; |
| |
| gpio1: gpio@30200000 { |
| compatible = "fsl,imx8mm-gpio", "fsl,imx35-gpio"; |
| reg = <0x30200000 0x10000>; |
| interrupts = <GIC_SPI 64 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>; |
| clocks = <&clk IMX8MM_CLK_GPIO1_ROOT>; |
| gpio-controller; |
| #gpio-cells = <2>; |
| interrupt-controller; |
| #interrupt-cells = <2>; |
| gpio-ranges = <&iomuxc 0 10 30>; |
| }; |
| |
| gpio2: gpio@30210000 { |
| compatible = "fsl,imx8mm-gpio", "fsl,imx35-gpio"; |
| reg = <0x30210000 0x10000>; |
| interrupts = <GIC_SPI 66 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 67 IRQ_TYPE_LEVEL_HIGH>; |
| clocks = <&clk IMX8MM_CLK_GPIO2_ROOT>; |
| gpio-controller; |
| #gpio-cells = <2>; |
| interrupt-controller; |
| #interrupt-cells = <2>; |
| gpio-ranges = <&iomuxc 0 40 21>; |
| }; |
| |
| gpio3: gpio@30220000 { |
| compatible = "fsl,imx8mm-gpio", "fsl,imx35-gpio"; |
| reg = <0x30220000 0x10000>; |
| interrupts = <GIC_SPI 68 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 69 IRQ_TYPE_LEVEL_HIGH>; |
| clocks = <&clk IMX8MM_CLK_GPIO3_ROOT>; |
| gpio-controller; |
| #gpio-cells = <2>; |
| interrupt-controller; |
| #interrupt-cells = <2>; |
| gpio-ranges = <&iomuxc 0 61 26>; |
| }; |
| |
| gpio4: gpio@30230000 { |
| compatible = "fsl,imx8mm-gpio", "fsl,imx35-gpio"; |
| reg = <0x30230000 0x10000>; |
| interrupts = <GIC_SPI 70 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 71 IRQ_TYPE_LEVEL_HIGH>; |
| clocks = <&clk IMX8MM_CLK_GPIO4_ROOT>; |
| gpio-controller; |
| #gpio-cells = <2>; |
| interrupt-controller; |
| #interrupt-cells = <2>; |
| gpio-ranges = <&iomuxc 0 87 32>; |
| }; |
| |
| gpio5: gpio@30240000 { |
| compatible = "fsl,imx8mm-gpio", "fsl,imx35-gpio"; |
| reg = <0x30240000 0x10000>; |
| interrupts = <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>; |
| clocks = <&clk IMX8MM_CLK_GPIO5_ROOT>; |
| gpio-controller; |
| #gpio-cells = <2>; |
| interrupt-controller; |
| #interrupt-cells = <2>; |
| gpio-ranges = <&iomuxc 0 119 30>; |
| }; |
| |
| tmu: tmu@30260000 { |
| compatible = "fsl,imx8mm-tmu"; |
| reg = <0x30260000 0x10000>; |
| clocks = <&clk IMX8MM_CLK_TMU_ROOT>; |
| nvmem-cells = <&tmu_calib>; |
| nvmem-cell-names = "calib"; |
| #thermal-sensor-cells = <0>; |
| }; |
| |
| wdog1: watchdog@30280000 { |
| compatible = "fsl,imx8mm-wdt", "fsl,imx21-wdt"; |
| reg = <0x30280000 0x10000>; |
| interrupts = <GIC_SPI 78 IRQ_TYPE_LEVEL_HIGH>; |
| clocks = <&clk IMX8MM_CLK_WDOG1_ROOT>; |
| status = "disabled"; |
| }; |
| |
| wdog2: watchdog@30290000 { |
| compatible = "fsl,imx8mm-wdt", "fsl,imx21-wdt"; |
| reg = <0x30290000 0x10000>; |
| interrupts = <GIC_SPI 79 IRQ_TYPE_LEVEL_HIGH>; |
| clocks = <&clk IMX8MM_CLK_WDOG2_ROOT>; |
| status = "disabled"; |
| }; |
| |
| wdog3: watchdog@302a0000 { |
| compatible = "fsl,imx8mm-wdt", "fsl,imx21-wdt"; |
| reg = <0x302a0000 0x10000>; |
| interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>; |
| clocks = <&clk IMX8MM_CLK_WDOG3_ROOT>; |
| status = "disabled"; |
| }; |
| |
| sdma2: dma-controller@302c0000 { |
| compatible = "fsl,imx8mm-sdma", "fsl,imx8mq-sdma"; |
| reg = <0x302c0000 0x10000>; |
| interrupts = <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>; |
| clocks = <&clk IMX8MM_CLK_SDMA2_ROOT>, |
| <&clk IMX8MM_CLK_SDMA2_ROOT>; |
| clock-names = "ipg", "ahb"; |
| #dma-cells = <3>; |
| fsl,sdma-ram-script-name = "imx/sdma/sdma-imx7d.bin"; |
| }; |
| |
| sdma3: dma-controller@302b0000 { |
| compatible = "fsl,imx8mm-sdma", "fsl,imx8mq-sdma"; |
| reg = <0x302b0000 0x10000>; |
| interrupts = <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>; |
| clocks = <&clk IMX8MM_CLK_SDMA3_ROOT>, |
| <&clk IMX8MM_CLK_SDMA3_ROOT>; |
| clock-names = "ipg", "ahb"; |
| #dma-cells = <3>; |
| fsl,sdma-ram-script-name = "imx/sdma/sdma-imx7d.bin"; |
| }; |
| |
| iomuxc: pinctrl@30330000 { |
| compatible = "fsl,imx8mm-iomuxc"; |
| reg = <0x30330000 0x10000>; |
| }; |
| |
| gpr: syscon@30340000 { |
| compatible = "fsl,imx8mm-iomuxc-gpr", "syscon"; |
| reg = <0x30340000 0x10000>; |
| }; |
| |
| ocotp: efuse@30350000 { |
| compatible = "fsl,imx8mm-ocotp", "syscon"; |
| reg = <0x30350000 0x10000>; |
| clocks = <&clk IMX8MM_CLK_OCOTP_ROOT>; |
| /* For nvmem subnodes */ |
| #address-cells = <1>; |
| #size-cells = <1>; |
| |
| /* |
| * The register address below maps to the MX8M |
| * Fusemap Description Table entries this way. |
| * Assuming |
| * reg = <ADDR SIZE>; |
| * then |
| * Fuse Address = (ADDR * 4) + 0x400 |
| * Note that if SIZE is greater than 4, then |
| * each subsequent fuse is located at offset |
| * +0x10 in Fusemap Description Table (e.g. |
| * reg = <0x4 0x8> describes fuses 0x410 and |
| * 0x420). |
| */ |
| imx8mm_uid: unique-id@4 { /* 0x410-0x420 */ |
| reg = <0x4 0x8>; |
| }; |
| |
| cpu_speed_grade: speed-grade@10 { /* 0x440 */ |
| reg = <0x10 4>; |
| }; |
| |
| tmu_calib: calib@3c { /* 0x4f0 */ |
| reg = <0x3c 4>; |
| }; |
| |
| fec_mac_address: mac-address@90 { /* 0x640 */ |
| reg = <0x90 6>; |
| }; |
| }; |
| |
| anatop: clock-controller@30360000 { |
| compatible = "fsl,imx8mm-anatop"; |
| reg = <0x30360000 0x10000>; |
| #clock-cells = <1>; |
| }; |
| |
| snvs: snvs@30370000 { |
| compatible = "fsl,sec-v4.0-mon","syscon", "simple-mfd"; |
| reg = <0x30370000 0x10000>; |
| |
| snvs_rtc: snvs-rtc-lp { |
| compatible = "fsl,sec-v4.0-mon-rtc-lp"; |
| regmap = <&snvs>; |
| offset = <0x34>; |
| interrupts = <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>; |
| clocks = <&clk IMX8MM_CLK_SNVS_ROOT>; |
| clock-names = "snvs-rtc"; |
| }; |
| |
| snvs_pwrkey: snvs-powerkey { |
| compatible = "fsl,sec-v4.0-pwrkey"; |
| regmap = <&snvs>; |
| interrupts = <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>; |
| clocks = <&clk IMX8MM_CLK_SNVS_ROOT>; |
| clock-names = "snvs-pwrkey"; |
| linux,keycode = <KEY_POWER>; |
| wakeup-source; |
| status = "disabled"; |
| }; |
| |
| snvs_lpgpr: snvs-lpgpr { |
| compatible = "fsl,imx8mm-snvs-lpgpr", |
| "fsl,imx7d-snvs-lpgpr"; |
| }; |
| }; |
| |
| clk: clock-controller@30380000 { |
| compatible = "fsl,imx8mm-ccm"; |
| reg = <0x30380000 0x10000>; |
| #clock-cells = <1>; |
| clocks = <&osc_32k>, <&osc_24m>, <&clk_ext1>, <&clk_ext2>, |
| <&clk_ext3>, <&clk_ext4>; |
| clock-names = "osc_32k", "osc_24m", "clk_ext1", "clk_ext2", |
| "clk_ext3", "clk_ext4"; |
| assigned-clocks = <&clk IMX8MM_CLK_A53_SRC>, |
| <&clk IMX8MM_CLK_A53_CORE>, |
| <&clk IMX8MM_CLK_NOC>, |
| <&clk IMX8MM_CLK_AUDIO_AHB>, |
| <&clk IMX8MM_CLK_IPG_AUDIO_ROOT>, |
| <&clk IMX8MM_SYS_PLL3>, |
| <&clk IMX8MM_VIDEO_PLL1>, |
| <&clk IMX8MM_AUDIO_PLL1>; |
| assigned-clock-parents = <&clk IMX8MM_SYS_PLL1_800M>, |
| <&clk IMX8MM_ARM_PLL_OUT>, |
| <&clk IMX8MM_SYS_PLL3_OUT>, |
| <&clk IMX8MM_SYS_PLL1_800M>; |
| assigned-clock-rates = <0>, <0>, <0>, |
| <400000000>, |
| <400000000>, |
| <750000000>, |
| <594000000>, |
| <393216000>; |
| }; |
| |
| src: reset-controller@30390000 { |
| compatible = "fsl,imx8mm-src", "fsl,imx8mq-src", "syscon"; |
| reg = <0x30390000 0x10000>; |
| interrupts = <GIC_SPI 89 IRQ_TYPE_LEVEL_HIGH>; |
| #reset-cells = <1>; |
| }; |
| |
| gpc: gpc@303a0000 { |
| compatible = "fsl,imx8mm-gpc"; |
| reg = <0x303a0000 0x10000>; |
| interrupts = <GIC_SPI 87 IRQ_TYPE_LEVEL_HIGH>; |
| interrupt-parent = <&gic>; |
| interrupt-controller; |
| #interrupt-cells = <3>; |
| |
| pgc { |
| #address-cells = <1>; |
| #size-cells = <0>; |
| |
| pgc_hsiomix: power-domain@0 { |
| #power-domain-cells = <0>; |
| reg = <IMX8MM_POWER_DOMAIN_HSIOMIX>; |
| clocks = <&clk IMX8MM_CLK_USB_BUS>; |
| assigned-clocks = <&clk IMX8MM_CLK_USB_BUS>; |
| assigned-clock-parents = <&clk IMX8MM_SYS_PLL2_500M>; |
| }; |
| |
| pgc_pcie: power-domain@1 { |
| #power-domain-cells = <0>; |
| reg = <IMX8MM_POWER_DOMAIN_PCIE>; |
| power-domains = <&pgc_hsiomix>; |
| clocks = <&clk IMX8MM_CLK_PCIE1_ROOT>; |
| }; |
| |
| pgc_otg1: power-domain@2 { |
| #power-domain-cells = <0>; |
| reg = <IMX8MM_POWER_DOMAIN_OTG1>; |
| }; |
| |
| pgc_otg2: power-domain@3 { |
| #power-domain-cells = <0>; |
| reg = <IMX8MM_POWER_DOMAIN_OTG2>; |
| }; |
| |
| pgc_gpumix: power-domain@4 { |
| #power-domain-cells = <0>; |
| reg = <IMX8MM_POWER_DOMAIN_GPUMIX>; |
| clocks = <&clk IMX8MM_CLK_GPU_BUS_ROOT>, |
| <&clk IMX8MM_CLK_GPU_AHB>; |
| assigned-clocks = <&clk IMX8MM_CLK_GPU_AXI>, |
| <&clk IMX8MM_CLK_GPU_AHB>; |
| assigned-clock-parents = <&clk IMX8MM_SYS_PLL1_800M>, |
| <&clk IMX8MM_SYS_PLL1_800M>; |
| assigned-clock-rates = <800000000>, <400000000>; |
| }; |
| |
| pgc_gpu: power-domain@5 { |
| #power-domain-cells = <0>; |
| reg = <IMX8MM_POWER_DOMAIN_GPU>; |
| clocks = <&clk IMX8MM_CLK_GPU_AHB>, |
| <&clk IMX8MM_CLK_GPU_BUS_ROOT>, |
| <&clk IMX8MM_CLK_GPU2D_ROOT>, |
| <&clk IMX8MM_CLK_GPU3D_ROOT>; |
| resets = <&src IMX8MQ_RESET_GPU_RESET>; |
| power-domains = <&pgc_gpumix>; |
| }; |
| |
| pgc_vpumix: power-domain@6 { |
| #power-domain-cells = <0>; |
| reg = <IMX8MM_POWER_DOMAIN_VPUMIX>; |
| clocks = <&clk IMX8MM_CLK_VPU_DEC_ROOT>; |
| assigned-clocks = <&clk IMX8MM_CLK_VPU_BUS>; |
| assigned-clock-parents = <&clk IMX8MM_SYS_PLL1_800M>; |
| }; |
| |
| pgc_vpu_g1: power-domain@7 { |
| #power-domain-cells = <0>; |
| reg = <IMX8MM_POWER_DOMAIN_VPUG1>; |
| }; |
| |
| pgc_vpu_g2: power-domain@8 { |
| #power-domain-cells = <0>; |
| reg = <IMX8MM_POWER_DOMAIN_VPUG2>; |
| }; |
| |
| pgc_vpu_h1: power-domain@9 { |
| #power-domain-cells = <0>; |
| reg = <IMX8MM_POWER_DOMAIN_VPUH1>; |
| }; |
| |
| pgc_dispmix: power-domain@10 { |
| #power-domain-cells = <0>; |
| reg = <IMX8MM_POWER_DOMAIN_DISPMIX>; |
| clocks = <&clk IMX8MM_CLK_DISP_APB_ROOT>, |
| <&clk IMX8MM_CLK_DISP_AXI_ROOT>; |
| assigned-clocks = <&clk IMX8MM_CLK_DISP_AXI>, |
| <&clk IMX8MM_CLK_DISP_APB>; |
| assigned-clock-parents = <&clk IMX8MM_SYS_PLL2_1000M>, |
| <&clk IMX8MM_SYS_PLL1_800M>; |
| assigned-clock-rates = <500000000>, <200000000>; |
| }; |
| |
| pgc_mipi: power-domain@11 { |
| #power-domain-cells = <0>; |
| reg = <IMX8MM_POWER_DOMAIN_MIPI>; |
| }; |
| }; |
| }; |
| }; |
| |
| aips2: bus@30400000 { |
| compatible = "fsl,aips-bus", "simple-bus"; |
| reg = <0x30400000 0x400000>; |
| #address-cells = <1>; |
| #size-cells = <1>; |
| ranges = <0x30400000 0x30400000 0x400000>; |
| |
| pwm1: pwm@30660000 { |
| compatible = "fsl,imx8mm-pwm", "fsl,imx27-pwm"; |
| reg = <0x30660000 0x10000>; |
| interrupts = <GIC_SPI 81 IRQ_TYPE_LEVEL_HIGH>; |
| clocks = <&clk IMX8MM_CLK_PWM1_ROOT>, |
| <&clk IMX8MM_CLK_PWM1_ROOT>; |
| clock-names = "ipg", "per"; |
| #pwm-cells = <3>; |
| status = "disabled"; |
| }; |
| |
| pwm2: pwm@30670000 { |
| compatible = "fsl,imx8mm-pwm", "fsl,imx27-pwm"; |
| reg = <0x30670000 0x10000>; |
| interrupts = <GIC_SPI 82 IRQ_TYPE_LEVEL_HIGH>; |
| clocks = <&clk IMX8MM_CLK_PWM2_ROOT>, |
| <&clk IMX8MM_CLK_PWM2_ROOT>; |
| clock-names = "ipg", "per"; |
| #pwm-cells = <3>; |
| status = "disabled"; |
| }; |
| |
| pwm3: pwm@30680000 { |
| compatible = "fsl,imx8mm-pwm", "fsl,imx27-pwm"; |
| reg = <0x30680000 0x10000>; |
| interrupts = <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>; |
| clocks = <&clk IMX8MM_CLK_PWM3_ROOT>, |
| <&clk IMX8MM_CLK_PWM3_ROOT>; |
| clock-names = "ipg", "per"; |
| #pwm-cells = <3>; |
| status = "disabled"; |
| }; |
| |
| pwm4: pwm@30690000 { |
| compatible = "fsl,imx8mm-pwm", "fsl,imx27-pwm"; |
| reg = <0x30690000 0x10000>; |
| interrupts = <GIC_SPI 84 IRQ_TYPE_LEVEL_HIGH>; |
| clocks = <&clk IMX8MM_CLK_PWM4_ROOT>, |
| <&clk IMX8MM_CLK_PWM4_ROOT>; |
| clock-names = "ipg", "per"; |
| #pwm-cells = <3>; |
| status = "disabled"; |
| }; |
| |
| system_counter: timer@306a0000 { |
| compatible = "nxp,sysctr-timer"; |
| reg = <0x306a0000 0x20000>; |
| interrupts = <GIC_SPI 47 IRQ_TYPE_LEVEL_HIGH>; |
| clocks = <&osc_24m>; |
| clock-names = "per"; |
| }; |
| }; |
| |
| aips3: bus@30800000 { |
| compatible = "fsl,aips-bus", "simple-bus"; |
| reg = <0x30800000 0x400000>; |
| #address-cells = <1>; |
| #size-cells = <1>; |
| ranges = <0x30800000 0x30800000 0x400000>, |
| <0x8000000 0x8000000 0x10000000>; |
| |
| spba1: spba-bus@30800000 { |
| compatible = "fsl,spba-bus", "simple-bus"; |
| #address-cells = <1>; |
| #size-cells = <1>; |
| reg = <0x30800000 0x100000>; |
| ranges; |
| |
| ecspi1: spi@30820000 { |
| compatible = "fsl,imx8mm-ecspi", "fsl,imx51-ecspi"; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| reg = <0x30820000 0x10000>; |
| interrupts = <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>; |
| clocks = <&clk IMX8MM_CLK_ECSPI1_ROOT>, |
| <&clk IMX8MM_CLK_ECSPI1_ROOT>; |
| clock-names = "ipg", "per"; |
| dmas = <&sdma1 0 7 1>, <&sdma1 1 7 2>; |
| dma-names = "rx", "tx"; |
| status = "disabled"; |
| }; |
| |
| ecspi2: spi@30830000 { |
| compatible = "fsl,imx8mm-ecspi", "fsl,imx51-ecspi"; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| reg = <0x30830000 0x10000>; |
| interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>; |
| clocks = <&clk IMX8MM_CLK_ECSPI2_ROOT>, |
| <&clk IMX8MM_CLK_ECSPI2_ROOT>; |
| clock-names = "ipg", "per"; |
| dmas = <&sdma1 2 7 1>, <&sdma1 3 7 2>; |
| dma-names = "rx", "tx"; |
| status = "disabled"; |
| }; |
| |
| ecspi3: spi@30840000 { |
| compatible = "fsl,imx8mm-ecspi", "fsl,imx51-ecspi"; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| reg = <0x30840000 0x10000>; |
| interrupts = <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>; |
| clocks = <&clk IMX8MM_CLK_ECSPI3_ROOT>, |
| <&clk IMX8MM_CLK_ECSPI3_ROOT>; |
| clock-names = "ipg", "per"; |
| dmas = <&sdma1 4 7 1>, <&sdma1 5 7 2>; |
| dma-names = "rx", "tx"; |
| status = "disabled"; |
| }; |
| |
| uart1: serial@30860000 { |
| compatible = "fsl,imx8mm-uart", "fsl,imx6q-uart"; |
| reg = <0x30860000 0x10000>; |
| interrupts = <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>; |
| clocks = <&clk IMX8MM_CLK_UART1_ROOT>, |
| <&clk IMX8MM_CLK_UART1_ROOT>; |
| clock-names = "ipg", "per"; |
| dmas = <&sdma1 22 4 0>, <&sdma1 23 4 0>; |
| dma-names = "rx", "tx"; |
| status = "disabled"; |
| }; |
| |
| uart3: serial@30880000 { |
| compatible = "fsl,imx8mm-uart", "fsl,imx6q-uart"; |
| reg = <0x30880000 0x10000>; |
| interrupts = <GIC_SPI 28 IRQ_TYPE_LEVEL_HIGH>; |
| clocks = <&clk IMX8MM_CLK_UART3_ROOT>, |
| <&clk IMX8MM_CLK_UART3_ROOT>; |
| clock-names = "ipg", "per"; |
| dmas = <&sdma1 26 4 0>, <&sdma1 27 4 0>; |
| dma-names = "rx", "tx"; |
| status = "disabled"; |
| }; |
| |
| uart2: serial@30890000 { |
| compatible = "fsl,imx8mm-uart", "fsl,imx6q-uart"; |
| reg = <0x30890000 0x10000>; |
| interrupts = <GIC_SPI 27 IRQ_TYPE_LEVEL_HIGH>; |
| clocks = <&clk IMX8MM_CLK_UART2_ROOT>, |
| <&clk IMX8MM_CLK_UART2_ROOT>; |
| clock-names = "ipg", "per"; |
| status = "disabled"; |
| }; |
| }; |
| |
| crypto: crypto@30900000 { |
| compatible = "fsl,sec-v4.0"; |
| #address-cells = <1>; |
| #size-cells = <1>; |
| reg = <0x30900000 0x40000>; |
| ranges = <0 0x30900000 0x40000>; |
| interrupts = <GIC_SPI 91 IRQ_TYPE_LEVEL_HIGH>; |
| clocks = <&clk IMX8MM_CLK_AHB>, |
| <&clk IMX8MM_CLK_IPG_ROOT>; |
| clock-names = "aclk", "ipg"; |
| |
| sec_jr0: jr@1000 { |
| compatible = "fsl,sec-v4.0-job-ring"; |
| reg = <0x1000 0x1000>; |
| interrupts = <GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>; |
| status = "disabled"; |
| }; |
| |
| sec_jr1: jr@2000 { |
| compatible = "fsl,sec-v4.0-job-ring"; |
| reg = <0x2000 0x1000>; |
| interrupts = <GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH>; |
| }; |
| |
| sec_jr2: jr@3000 { |
| compatible = "fsl,sec-v4.0-job-ring"; |
| reg = <0x3000 0x1000>; |
| interrupts = <GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH>; |
| }; |
| }; |
| |
| i2c1: i2c@30a20000 { |
| compatible = "fsl,imx8mm-i2c", "fsl,imx21-i2c"; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| reg = <0x30a20000 0x10000>; |
| interrupts = <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>; |
| clocks = <&clk IMX8MM_CLK_I2C1_ROOT>; |
| status = "disabled"; |
| }; |
| |
| i2c2: i2c@30a30000 { |
| compatible = "fsl,imx8mm-i2c", "fsl,imx21-i2c"; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| reg = <0x30a30000 0x10000>; |
| interrupts = <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>; |
| clocks = <&clk IMX8MM_CLK_I2C2_ROOT>; |
| status = "disabled"; |
| }; |
| |
| i2c3: i2c@30a40000 { |
| #address-cells = <1>; |
| #size-cells = <0>; |
| compatible = "fsl,imx8mm-i2c", "fsl,imx21-i2c"; |
| reg = <0x30a40000 0x10000>; |
| interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>; |
| clocks = <&clk IMX8MM_CLK_I2C3_ROOT>; |
| status = "disabled"; |
| }; |
| |
| i2c4: i2c@30a50000 { |
| compatible = "fsl,imx8mm-i2c", "fsl,imx21-i2c"; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| reg = <0x30a50000 0x10000>; |
| interrupts = <GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH>; |
| clocks = <&clk IMX8MM_CLK_I2C4_ROOT>; |
| status = "disabled"; |
| }; |
| |
| uart4: serial@30a60000 { |
| compatible = "fsl,imx8mm-uart", "fsl,imx6q-uart"; |
| reg = <0x30a60000 0x10000>; |
| interrupts = <GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>; |
| clocks = <&clk IMX8MM_CLK_UART4_ROOT>, |
| <&clk IMX8MM_CLK_UART4_ROOT>; |
| clock-names = "ipg", "per"; |
| dmas = <&sdma1 28 4 0>, <&sdma1 29 4 0>; |
| dma-names = "rx", "tx"; |
| status = "disabled"; |
| }; |
| |
| mu: mailbox@30aa0000 { |
| compatible = "fsl,imx8mm-mu", "fsl,imx6sx-mu"; |
| reg = <0x30aa0000 0x10000>; |
| interrupts = <GIC_SPI 88 IRQ_TYPE_LEVEL_HIGH>; |
| clocks = <&clk IMX8MM_CLK_MU_ROOT>; |
| #mbox-cells = <2>; |
| }; |
| |
| usdhc1: mmc@30b40000 { |
| compatible = "fsl,imx8mm-usdhc", "fsl,imx7d-usdhc"; |
| reg = <0x30b40000 0x10000>; |
| interrupts = <GIC_SPI 22 IRQ_TYPE_LEVEL_HIGH>; |
| clocks = <&clk IMX8MM_CLK_IPG_ROOT>, |
| <&clk IMX8MM_CLK_NAND_USDHC_BUS>, |
| <&clk IMX8MM_CLK_USDHC1_ROOT>; |
| clock-names = "ipg", "ahb", "per"; |
| fsl,tuning-start-tap = <20>; |
| fsl,tuning-step = <2>; |
| bus-width = <4>; |
| status = "disabled"; |
| }; |
| |
| usdhc2: mmc@30b50000 { |
| compatible = "fsl,imx8mm-usdhc", "fsl,imx7d-usdhc"; |
| reg = <0x30b50000 0x10000>; |
| interrupts = <GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH>; |
| clocks = <&clk IMX8MM_CLK_IPG_ROOT>, |
| <&clk IMX8MM_CLK_NAND_USDHC_BUS>, |
| <&clk IMX8MM_CLK_USDHC2_ROOT>; |
| clock-names = "ipg", "ahb", "per"; |
| fsl,tuning-start-tap = <20>; |
| fsl,tuning-step = <2>; |
| bus-width = <4>; |
| status = "disabled"; |
| }; |
| |
| usdhc3: mmc@30b60000 { |
| compatible = "fsl,imx8mm-usdhc", "fsl,imx7d-usdhc"; |
| reg = <0x30b60000 0x10000>; |
| interrupts = <GIC_SPI 24 IRQ_TYPE_LEVEL_HIGH>; |
| clocks = <&clk IMX8MM_CLK_IPG_ROOT>, |
| <&clk IMX8MM_CLK_NAND_USDHC_BUS>, |
| <&clk IMX8MM_CLK_USDHC3_ROOT>; |
| clock-names = "ipg", "ahb", "per"; |
| fsl,tuning-start-tap = <20>; |
| fsl,tuning-step = <2>; |
| bus-width = <4>; |
| status = "disabled"; |
| }; |
| |
| flexspi: spi@30bb0000 { |
| #address-cells = <1>; |
| #size-cells = <0>; |
| compatible = "nxp,imx8mm-fspi"; |
| reg = <0x30bb0000 0x10000>, <0x8000000 0x10000000>; |
| reg-names = "fspi_base", "fspi_mmap"; |
| interrupts = <GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>; |
| clocks = <&clk IMX8MM_CLK_QSPI_ROOT>, |
| <&clk IMX8MM_CLK_QSPI_ROOT>; |
| clock-names = "fspi_en", "fspi"; |
| status = "disabled"; |
| }; |
| |
| sdma1: dma-controller@30bd0000 { |
| compatible = "fsl,imx8mm-sdma", "fsl,imx8mq-sdma"; |
| reg = <0x30bd0000 0x10000>; |
| interrupts = <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>; |
| clocks = <&clk IMX8MM_CLK_SDMA1_ROOT>, |
| <&clk IMX8MM_CLK_AHB>; |
| clock-names = "ipg", "ahb"; |
| #dma-cells = <3>; |
| fsl,sdma-ram-script-name = "imx/sdma/sdma-imx7d.bin"; |
| }; |
| |
| fec1: ethernet@30be0000 { |
| compatible = "fsl,imx8mm-fec", "fsl,imx8mq-fec", "fsl,imx6sx-fec"; |
| reg = <0x30be0000 0x10000>; |
| interrupts = <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 119 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 120 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 121 IRQ_TYPE_LEVEL_HIGH>; |
| clocks = <&clk IMX8MM_CLK_ENET1_ROOT>, |
| <&clk IMX8MM_CLK_ENET1_ROOT>, |
| <&clk IMX8MM_CLK_ENET_TIMER>, |
| <&clk IMX8MM_CLK_ENET_REF>, |
| <&clk IMX8MM_CLK_ENET_PHY_REF>; |
| clock-names = "ipg", "ahb", "ptp", |
| "enet_clk_ref", "enet_out"; |
| assigned-clocks = <&clk IMX8MM_CLK_ENET_AXI>, |
| <&clk IMX8MM_CLK_ENET_TIMER>, |
| <&clk IMX8MM_CLK_ENET_REF>, |
| <&clk IMX8MM_CLK_ENET_PHY_REF>; |
| assigned-clock-parents = <&clk IMX8MM_SYS_PLL1_266M>, |
| <&clk IMX8MM_SYS_PLL2_100M>, |
| <&clk IMX8MM_SYS_PLL2_125M>, |
| <&clk IMX8MM_SYS_PLL2_50M>; |
| assigned-clock-rates = <0>, <100000000>, <125000000>, <0>; |
| fsl,num-tx-queues = <3>; |
| fsl,num-rx-queues = <3>; |
| nvmem-cells = <&fec_mac_address>; |
| nvmem-cell-names = "mac-address"; |
| fsl,stop-mode = <&gpr 0x10 3>; |
| status = "disabled"; |
| }; |
| |
| }; |
| |
| aips4: bus@32c00000 { |
| compatible = "fsl,aips-bus", "simple-bus"; |
| reg = <0x32c00000 0x400000>; |
| #address-cells = <1>; |
| #size-cells = <1>; |
| ranges = <0x32c00000 0x32c00000 0x400000>; |
| |
| lcdif: lcdif@32e00000 { |
| compatible = "fsl,imx8mm-lcdif", "fsl,imx6sx-lcdif"; |
| reg = <0x32e00000 0x10000>; |
| clocks = <&clk IMX8MM_CLK_LCDIF_PIXEL>, |
| <&clk IMX8MM_CLK_DISP_APB_ROOT>, |
| <&clk IMX8MM_CLK_DISP_AXI_ROOT>; |
| clock-names = "pix", "axi", "disp_axi"; |
| assigned-clocks = <&clk IMX8MM_CLK_LCDIF_PIXEL>, |
| <&clk IMX8MM_CLK_DISP_AXI>, |
| <&clk IMX8MM_CLK_DISP_APB>; |
| assigned-clock-parents = <&clk IMX8MM_VIDEO_PLL1_OUT>, |
| <&clk IMX8MM_SYS_PLL2_1000M>, |
| <&clk IMX8MM_SYS_PLL1_800M>; |
| assigned-clock-rates = <594000000>, <500000000>, <200000000>; |
| interrupts = <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>; |
| power-domains = <&disp_blk_ctrl IMX8MM_DISPBLK_PD_LCDIF>; |
| status = "disabled"; |
| |
| port { |
| lcdif_to_dsim: endpoint { |
| remote-endpoint = <&dsim_from_lcdif>; |
| }; |
| }; |
| }; |
| |
| mipi_dsi: dsi@32e10000 { |
| compatible = "fsl,imx8mm-mipi-dsim"; |
| reg = <0x32e10000 0x400>; |
| clocks = <&clk IMX8MM_CLK_DSI_CORE>, |
| <&clk IMX8MM_CLK_DSI_PHY_REF>; |
| clock-names = "bus_clk", "sclk_mipi"; |
| assigned-clocks = <&clk IMX8MM_CLK_DSI_CORE>, |
| <&clk IMX8MM_CLK_DSI_PHY_REF>; |
| assigned-clock-parents = <&clk IMX8MM_SYS_PLL1_266M>, |
| <&clk IMX8MM_CLK_24M>; |
| assigned-clock-rates = <266000000>, <24000000>; |
| samsung,pll-clock-frequency = <24000000>; |
| interrupts = <GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH>; |
| power-domains = <&disp_blk_ctrl IMX8MM_DISPBLK_PD_MIPI_DSI>; |
| status = "disabled"; |
| |
| ports { |
| #address-cells = <1>; |
| #size-cells = <0>; |
| |
| port@0 { |
| reg = <0>; |
| |
| dsim_from_lcdif: endpoint { |
| remote-endpoint = <&lcdif_to_dsim>; |
| }; |
| }; |
| }; |
| }; |
| |
| csi: csi@32e20000 { |
| compatible = "fsl,imx8mm-csi", "fsl,imx7-csi"; |
| reg = <0x32e20000 0x1000>; |
| interrupts = <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>; |
| clocks = <&clk IMX8MM_CLK_CSI1_ROOT>; |
| clock-names = "mclk"; |
| power-domains = <&disp_blk_ctrl IMX8MM_DISPBLK_PD_CSI_BRIDGE>; |
| status = "disabled"; |
| |
| port { |
| csi_in: endpoint { |
| remote-endpoint = <&imx8mm_mipi_csi_out>; |
| }; |
| }; |
| }; |
| |
| disp_blk_ctrl: blk-ctrl@32e28000 { |
| compatible = "fsl,imx8mm-disp-blk-ctrl", "syscon"; |
| reg = <0x32e28000 0x100>; |
| power-domains = <&pgc_dispmix>, <&pgc_dispmix>, |
| <&pgc_dispmix>, <&pgc_mipi>, |
| <&pgc_mipi>; |
| power-domain-names = "bus", "csi-bridge", |
| "lcdif", "mipi-dsi", |
| "mipi-csi"; |
| clocks = <&clk IMX8MM_CLK_DISP_AXI_ROOT>, |
| <&clk IMX8MM_CLK_DISP_APB_ROOT>, |
| <&clk IMX8MM_CLK_CSI1_ROOT>, |
| <&clk IMX8MM_CLK_DISP_AXI_ROOT>, |
| <&clk IMX8MM_CLK_DISP_APB_ROOT>, |
| <&clk IMX8MM_CLK_DISP_ROOT>, |
| <&clk IMX8MM_CLK_DSI_CORE>, |
| <&clk IMX8MM_CLK_DSI_PHY_REF>, |
| <&clk IMX8MM_CLK_CSI1_CORE>, |
| <&clk IMX8MM_CLK_CSI1_PHY_REF>; |
| clock-names = "csi-bridge-axi","csi-bridge-apb", |
| "csi-bridge-core", "lcdif-axi", |
| "lcdif-apb", "lcdif-pix", |
| "dsi-pclk", "dsi-ref", |
| "csi-aclk", "csi-pclk"; |
| #power-domain-cells = <1>; |
| }; |
| |
| mipi_csi: mipi-csi@32e30000 { |
| compatible = "fsl,imx8mm-mipi-csi2"; |
| reg = <0x32e30000 0x1000>; |
| interrupts = <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>; |
| assigned-clocks = <&clk IMX8MM_CLK_CSI1_CORE>; |
| assigned-clock-parents = <&clk IMX8MM_SYS_PLL2_1000M>; |
| |
| clock-frequency = <333000000>; |
| clocks = <&clk IMX8MM_CLK_DISP_APB_ROOT>, |
| <&clk IMX8MM_CLK_CSI1_ROOT>, |
| <&clk IMX8MM_CLK_CSI1_PHY_REF>, |
| <&clk IMX8MM_CLK_DISP_AXI_ROOT>; |
| clock-names = "pclk", "wrap", "phy", "axi"; |
| power-domains = <&disp_blk_ctrl IMX8MM_DISPBLK_PD_MIPI_CSI>; |
| status = "disabled"; |
| |
| ports { |
| #address-cells = <1>; |
| #size-cells = <0>; |
| |
| port@0 { |
| reg = <0>; |
| }; |
| |
| port@1 { |
| reg = <1>; |
| |
| imx8mm_mipi_csi_out: endpoint { |
| remote-endpoint = <&csi_in>; |
| }; |
| }; |
| }; |
| }; |
| |
| usbotg1: usb@32e40000 { |
| compatible = "fsl,imx8mm-usb", "fsl,imx7d-usb", "fsl,imx27-usb"; |
| reg = <0x32e40000 0x200>; |
| interrupts = <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>; |
| clocks = <&clk IMX8MM_CLK_USB1_CTRL_ROOT>; |
| clock-names = "usb1_ctrl_root_clk"; |
| assigned-clocks = <&clk IMX8MM_CLK_USB_BUS>; |
| assigned-clock-parents = <&clk IMX8MM_SYS_PLL2_500M>; |
| phys = <&usbphynop1>; |
| fsl,usbmisc = <&usbmisc1 0>; |
| power-domains = <&pgc_hsiomix>; |
| status = "disabled"; |
| }; |
| |
| usbmisc1: usbmisc@32e40200 { |
| compatible = "fsl,imx8mm-usbmisc", "fsl,imx7d-usbmisc", |
| "fsl,imx6q-usbmisc"; |
| #index-cells = <1>; |
| reg = <0x32e40200 0x200>; |
| }; |
| |
| usbotg2: usb@32e50000 { |
| compatible = "fsl,imx8mm-usb", "fsl,imx7d-usb", "fsl,imx27-usb"; |
| reg = <0x32e50000 0x200>; |
| interrupts = <GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH>; |
| clocks = <&clk IMX8MM_CLK_USB1_CTRL_ROOT>; |
| clock-names = "usb1_ctrl_root_clk"; |
| assigned-clocks = <&clk IMX8MM_CLK_USB_BUS>; |
| assigned-clock-parents = <&clk IMX8MM_SYS_PLL2_500M>; |
| phys = <&usbphynop2>; |
| fsl,usbmisc = <&usbmisc2 0>; |
| power-domains = <&pgc_hsiomix>; |
| status = "disabled"; |
| }; |
| |
| usbmisc2: usbmisc@32e50200 { |
| compatible = "fsl,imx8mm-usbmisc", "fsl,imx7d-usbmisc", |
| "fsl,imx6q-usbmisc"; |
| #index-cells = <1>; |
| reg = <0x32e50200 0x200>; |
| }; |
| |
| pcie_phy: pcie-phy@32f00000 { |
| compatible = "fsl,imx8mm-pcie-phy"; |
| reg = <0x32f00000 0x10000>; |
| clocks = <&clk IMX8MM_CLK_PCIE1_PHY>; |
| clock-names = "ref"; |
| assigned-clocks = <&clk IMX8MM_CLK_PCIE1_PHY>; |
| assigned-clock-rates = <100000000>; |
| assigned-clock-parents = <&clk IMX8MM_SYS_PLL2_100M>; |
| resets = <&src IMX8MQ_RESET_PCIEPHY>; |
| reset-names = "pciephy"; |
| #phy-cells = <0>; |
| status = "disabled"; |
| }; |
| }; |
| |
| dma_apbh: dma-controller@33000000 { |
| compatible = "fsl,imx7d-dma-apbh", "fsl,imx28-dma-apbh"; |
| reg = <0x33000000 0x2000>; |
| interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>; |
| #dma-cells = <1>; |
| dma-channels = <4>; |
| clocks = <&clk IMX8MM_CLK_NAND_USDHC_BUS_RAWNAND_CLK>; |
| }; |
| |
| gpmi: nand-controller@33002000 { |
| compatible = "fsl,imx8mm-gpmi-nand", "fsl,imx7d-gpmi-nand"; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| reg = <0x33002000 0x2000>, <0x33004000 0x4000>; |
| reg-names = "gpmi-nand", "bch"; |
| interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>; |
| interrupt-names = "bch"; |
| clocks = <&clk IMX8MM_CLK_NAND_ROOT>, |
| <&clk IMX8MM_CLK_NAND_USDHC_BUS_RAWNAND_CLK>; |
| clock-names = "gpmi_io", "gpmi_bch_apb"; |
| dmas = <&dma_apbh 0>; |
| dma-names = "rx-tx"; |
| status = "disabled"; |
| }; |
| |
| pcie0: pcie@33800000 { |
| compatible = "fsl,imx8mm-pcie"; |
| reg = <0x33800000 0x400000>, <0x1ff00000 0x80000>; |
| reg-names = "dbi", "config"; |
| #address-cells = <3>; |
| #size-cells = <2>; |
| device_type = "pci"; |
| bus-range = <0x00 0xff>; |
| ranges = <0x81000000 0 0x00000000 0x1ff80000 0 0x00010000>, /* downstream I/O 64KB */ |
| <0x82000000 0 0x18000000 0x18000000 0 0x07f00000>; /* non-prefetchable memory */ |
| num-lanes = <1>; |
| num-viewport = <4>; |
| interrupts = <GIC_SPI 122 IRQ_TYPE_LEVEL_HIGH>; |
| interrupt-names = "msi"; |
| #interrupt-cells = <1>; |
| interrupt-map-mask = <0 0 0 0x7>; |
| interrupt-map = <0 0 0 1 &gic GIC_SPI 125 IRQ_TYPE_LEVEL_HIGH>, |
| <0 0 0 2 &gic GIC_SPI 124 IRQ_TYPE_LEVEL_HIGH>, |
| <0 0 0 3 &gic GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>, |
| <0 0 0 4 &gic GIC_SPI 122 IRQ_TYPE_LEVEL_HIGH>; |
| fsl,max-link-speed = <2>; |
| linux,pci-domain = <0>; |
| clocks = <&clk IMX8MM_CLK_PCIE1_ROOT>, |
| <&clk IMX8MM_CLK_PCIE1_PHY>, |
| <&clk IMX8MM_CLK_PCIE1_AUX>; |
| clock-names = "pcie", "pcie_bus", "pcie_aux"; |
| power-domains = <&pgc_pcie>; |
| resets = <&src IMX8MQ_RESET_PCIE_CTRL_APPS_EN>, |
| <&src IMX8MQ_RESET_PCIE_CTRL_APPS_TURNOFF>; |
| reset-names = "apps", "turnoff"; |
| phys = <&pcie_phy>; |
| phy-names = "pcie-phy"; |
| status = "disabled"; |
| }; |
| |
| pcie0_ep: pcie-ep@33800000 { |
| compatible = "fsl,imx8mm-pcie-ep"; |
| reg = <0x33800000 0x400000>, |
| <0x18000000 0x8000000>; |
| reg-names = "dbi", "addr_space"; |
| num-lanes = <1>; |
| interrupts = <GIC_SPI 127 IRQ_TYPE_LEVEL_HIGH>; |
| interrupt-names = "dma"; |
| fsl,max-link-speed = <2>; |
| clocks = <&clk IMX8MM_CLK_PCIE1_ROOT>, |
| <&clk IMX8MM_CLK_PCIE1_PHY>, |
| <&clk IMX8MM_CLK_PCIE1_AUX>; |
| clock-names = "pcie", "pcie_bus", "pcie_aux"; |
| power-domains = <&pgc_pcie>; |
| resets = <&src IMX8MQ_RESET_PCIE_CTRL_APPS_EN>, |
| <&src IMX8MQ_RESET_PCIE_CTRL_APPS_TURNOFF>; |
| reset-names = "apps", "turnoff"; |
| phys = <&pcie_phy>; |
| phy-names = "pcie-phy"; |
| num-ib-windows = <4>; |
| num-ob-windows = <4>; |
| status = "disabled"; |
| }; |
| |
| gpu_3d: gpu@38000000 { |
| compatible = "vivante,gc"; |
| reg = <0x38000000 0x8000>; |
| interrupts = <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>; |
| clocks = <&clk IMX8MM_CLK_GPU_AHB>, |
| <&clk IMX8MM_CLK_GPU_BUS_ROOT>, |
| <&clk IMX8MM_CLK_GPU3D_ROOT>, |
| <&clk IMX8MM_CLK_GPU3D_ROOT>; |
| clock-names = "reg", "bus", "core", "shader"; |
| assigned-clocks = <&clk IMX8MM_CLK_GPU3D_CORE>, |
| <&clk IMX8MM_GPU_PLL_OUT>; |
| assigned-clock-parents = <&clk IMX8MM_GPU_PLL_OUT>; |
| assigned-clock-rates = <0>, <1000000000>; |
| power-domains = <&pgc_gpu>; |
| }; |
| |
| gpu_2d: gpu@38008000 { |
| compatible = "vivante,gc"; |
| reg = <0x38008000 0x8000>; |
| interrupts = <GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>; |
| clocks = <&clk IMX8MM_CLK_GPU_AHB>, |
| <&clk IMX8MM_CLK_GPU_BUS_ROOT>, |
| <&clk IMX8MM_CLK_GPU2D_ROOT>; |
| clock-names = "reg", "bus", "core"; |
| assigned-clocks = <&clk IMX8MM_CLK_GPU2D_CORE>, |
| <&clk IMX8MM_GPU_PLL_OUT>; |
| assigned-clock-parents = <&clk IMX8MM_GPU_PLL_OUT>; |
| assigned-clock-rates = <0>, <1000000000>; |
| power-domains = <&pgc_gpu>; |
| }; |
| |
| vpu_g1: video-codec@38300000 { |
| compatible = "nxp,imx8mm-vpu-g1"; |
| reg = <0x38300000 0x10000>; |
| interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>; |
| clocks = <&clk IMX8MM_CLK_VPU_G1_ROOT>; |
| power-domains = <&vpu_blk_ctrl IMX8MM_VPUBLK_PD_G1>; |
| }; |
| |
| vpu_g2: video-codec@38310000 { |
| compatible = "nxp,imx8mq-vpu-g2"; |
| reg = <0x38310000 0x10000>; |
| interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>; |
| clocks = <&clk IMX8MM_CLK_VPU_G2_ROOT>; |
| power-domains = <&vpu_blk_ctrl IMX8MM_VPUBLK_PD_G2>; |
| }; |
| |
| vpu_blk_ctrl: blk-ctrl@38330000 { |
| compatible = "fsl,imx8mm-vpu-blk-ctrl", "syscon"; |
| reg = <0x38330000 0x100>; |
| power-domains = <&pgc_vpumix>, <&pgc_vpu_g1>, |
| <&pgc_vpu_g2>, <&pgc_vpu_h1>; |
| power-domain-names = "bus", "g1", "g2", "h1"; |
| clocks = <&clk IMX8MM_CLK_VPU_G1_ROOT>, |
| <&clk IMX8MM_CLK_VPU_G2_ROOT>, |
| <&clk IMX8MM_CLK_VPU_H1_ROOT>; |
| clock-names = "g1", "g2", "h1"; |
| assigned-clocks = <&clk IMX8MM_CLK_VPU_G1>, |
| <&clk IMX8MM_CLK_VPU_G2>; |
| assigned-clock-parents = <&clk IMX8MM_VPU_PLL_OUT>, |
| <&clk IMX8MM_VPU_PLL_OUT>; |
| assigned-clock-rates = <600000000>, |
| <600000000>; |
| #power-domain-cells = <1>; |
| }; |
| |
| gic: interrupt-controller@38800000 { |
| compatible = "arm,gic-v3"; |
| reg = <0x38800000 0x10000>, /* GIC Dist */ |
| <0x38880000 0xc0000>; /* GICR (RD_base + SGI_base) */ |
| #interrupt-cells = <3>; |
| interrupt-controller; |
| interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH>; |
| }; |
| |
| ddrc: memory-controller@3d400000 { |
| compatible = "fsl,imx8mm-ddrc", "fsl,imx8m-ddrc"; |
| reg = <0x3d400000 0x400000>; |
| clock-names = "core", "pll", "alt", "apb"; |
| clocks = <&clk IMX8MM_CLK_DRAM_CORE>, |
| <&clk IMX8MM_DRAM_PLL>, |
| <&clk IMX8MM_CLK_DRAM_ALT>, |
| <&clk IMX8MM_CLK_DRAM_APB>; |
| }; |
| |
| ddr-pmu@3d800000 { |
| compatible = "fsl,imx8mm-ddr-pmu", "fsl,imx8m-ddr-pmu"; |
| reg = <0x3d800000 0x400000>; |
| interrupts = <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>; |
| }; |
| }; |
| }; |
