| // SPDX-License-Identifier: (GPL-2.0+ OR MIT) |
| /* |
| * Copyright 2023 Logic PD, Inc dba Beacon EmbeddedWorks |
| */ |
| |
| /dts-v1/; |
| |
| #include <dt-bindings/usb/pd.h> |
| #include <dt-bindings/phy/phy-imx8-pcie.h> |
| #include "imx8mp.dtsi" |
| #include "imx8mp-beacon-som.dtsi" |
| |
| / { |
| model = "Beacon EmbeddedWorks i.MX8MPlus Development kit"; |
| compatible = "beacon,imx8mp-beacon-kit", "fsl,imx8mp"; |
| |
| aliases { |
| ethernet0 = &eqos; |
| ethernet1 = &fec; |
| }; |
| |
| chosen { |
| stdout-path = &uart2; |
| }; |
| |
| connector { |
| compatible = "usb-c-connector"; |
| label = "USB-C"; |
| data-role = "dual"; |
| |
| ports { |
| #address-cells = <1>; |
| #size-cells = <0>; |
| |
| port@0 { |
| reg = <0>; |
| |
| hs_ep: endpoint { |
| remote-endpoint = <&usb3_hs_ep>; |
| }; |
| }; |
| port@1 { |
| reg = <1>; |
| |
| ss_ep: endpoint { |
| remote-endpoint = <&hd3ss3220_in_ep>; |
| }; |
| }; |
| }; |
| }; |
| |
| gpio-keys { |
| compatible = "gpio-keys"; |
| autorepeat; |
| |
| button-0 { |
| label = "btn0"; |
| linux,code = <BTN_0>; |
| gpios = <&pca6416_1 12 (GPIO_ACTIVE_LOW | GPIO_PULL_UP)>; |
| wakeup-source; |
| }; |
| |
| button-1 { |
| label = "btn1"; |
| linux,code = <BTN_1>; |
| gpios = <&pca6416_1 13 (GPIO_ACTIVE_LOW | GPIO_PULL_UP)>; |
| wakeup-source; |
| }; |
| |
| button-2 { |
| label = "btn2"; |
| linux,code = <BTN_2>; |
| gpios = <&pca6416_1 14 (GPIO_ACTIVE_LOW | GPIO_PULL_UP)>; |
| wakeup-source; |
| }; |
| |
| button-3 { |
| label = "btn3"; |
| linux,code = <BTN_3>; |
| gpios = <&pca6416_1 15 (GPIO_ACTIVE_LOW | GPIO_PULL_UP)>; |
| wakeup-source; |
| }; |
| }; |
| |
| leds { |
| compatible = "gpio-leds"; |
| pinctrl-names = "default"; |
| pinctrl-0 = <&pinctrl_led3>; |
| |
| led-0 { |
| label = "gen_led0"; |
| gpios = <&pca6416_1 4 GPIO_ACTIVE_HIGH>; |
| default-state = "off"; |
| }; |
| |
| led-1 { |
| label = "gen_led1"; |
| gpios = <&pca6416_1 5 GPIO_ACTIVE_HIGH>; |
| default-state = "off"; |
| }; |
| |
| led-2 { |
| label = "gen_led2"; |
| gpios = <&pca6416_1 6 GPIO_ACTIVE_HIGH>; |
| default-state = "off"; |
| }; |
| |
| led-3 { |
| label = "heartbeat"; |
| gpios = <&gpio4 28 GPIO_ACTIVE_HIGH>; |
| linux,default-trigger = "heartbeat"; |
| }; |
| }; |
| |
| pcie0_refclk: clock-pcie { |
| compatible = "fixed-clock"; |
| #clock-cells = <0>; |
| clock-frequency = <100000000>; |
| }; |
| |
| reg_audio: regulator-wm8962 { |
| compatible = "regulator-fixed"; |
| regulator-name = "3v3_aud"; |
| regulator-min-microvolt = <3300000>; |
| regulator-max-microvolt = <3300000>; |
| gpio = <&pca6416_1 11 GPIO_ACTIVE_HIGH>; |
| enable-active-high; |
| }; |
| |
| reg_usdhc2_vmmc: regulator-usdhc2 { |
| compatible = "regulator-fixed"; |
| regulator-name = "VSD_3V3"; |
| regulator-min-microvolt = <3300000>; |
| regulator-max-microvolt = <3300000>; |
| gpio = <&gpio2 19 GPIO_ACTIVE_HIGH>; |
| enable-active-high; |
| startup-delay-us = <100>; |
| off-on-delay-us = <20000>; |
| }; |
| |
| reg_usb1_host_vbus: regulator-usb1-vbus { |
| compatible = "regulator-fixed"; |
| regulator-name = "usb1_host_vbus"; |
| regulator-max-microvolt = <5000000>; |
| regulator-min-microvolt = <5000000>; |
| gpio = <&pca6416_1 0 GPIO_ACTIVE_HIGH>; |
| enable-active-high; |
| }; |
| |
| sound-wm8962 { |
| compatible = "simple-audio-card"; |
| simple-audio-card,name = "wm8962"; |
| simple-audio-card,format = "i2s"; |
| simple-audio-card,widgets = "Headphone", "Headphones", |
| "Microphone", "Headset Mic", |
| "Speaker", "Speaker"; |
| simple-audio-card,routing = "Headphones", "HPOUTL", |
| "Headphones", "HPOUTR", |
| "Speaker", "SPKOUTL", |
| "Speaker", "SPKOUTR", |
| "Headset Mic", "MICBIAS", |
| "IN3R", "Headset Mic"; |
| |
| simple-audio-card,cpu { |
| sound-dai = <&sai3>; |
| }; |
| |
| simple-audio-card,codec { |
| sound-dai = <&wm8962>; |
| clocks = <&clk IMX8MP_CLK_IPP_DO_CLKO1>; |
| frame-master; |
| bitclock-master; |
| }; |
| }; |
| }; |
| |
| &ecspi2 { |
| pinctrl-names = "default"; |
| pinctrl-0 = <&pinctrl_ecspi2>; |
| cs-gpios = <&gpio5 13 GPIO_ACTIVE_LOW>; |
| status = "okay"; |
| |
| tpm: tpm@0 { |
| compatible = "infineon,slb9670"; |
| reg = <0>; |
| pinctrl-names = "default"; |
| pinctrl-0 = <&pinctrl_tpm>; |
| reset-gpios = <&gpio4 0 GPIO_ACTIVE_LOW>; |
| spi-max-frequency = <18500000>; |
| }; |
| }; |
| |
| &fec { |
| pinctrl-names = "default"; |
| pinctrl-0 = <&pinctrl_fec>; |
| phy-mode = "rgmii-id"; |
| phy-handle = <ðphy1>; |
| fsl,magic-packet; |
| status = "okay"; |
| |
| mdio { |
| #address-cells = <1>; |
| #size-cells = <0>; |
| |
| ethphy1: ethernet-phy@3 { |
| compatible = "ethernet-phy-id0022.1640", |
| "ethernet-phy-ieee802.3-c22"; |
| reg = <3>; |
| reset-gpios = <&gpio4 18 GPIO_ACTIVE_LOW>; |
| reset-assert-us = <10000>; |
| reset-deassert-us = <150000>; |
| interrupt-parent = <&gpio4>; |
| interrupts = <2 IRQ_TYPE_LEVEL_LOW>; |
| }; |
| }; |
| }; |
| |
| &flexcan1 { |
| pinctrl-names = "default"; |
| pinctrl-0 = <&pinctrl_flexcan1>; |
| status = "okay"; |
| }; |
| |
| &gpio2 { |
| usb-mux-hog { |
| gpio-hog; |
| gpios = <20 0>; |
| output-low; |
| line-name = "USB-C Mux En"; |
| }; |
| }; |
| |
| &i2c2 { |
| clock-frequency = <384000>; |
| pinctrl-names = "default"; |
| pinctrl-0 = <&pinctrl_i2c2>; |
| status = "okay"; |
| |
| pca6416_3: gpio@20 { |
| compatible = "nxp,pcal6416"; |
| reg = <0x20>; |
| gpio-controller; |
| #gpio-cells = <2>; |
| interrupt-parent = <&gpio4>; |
| interrupts = <27 IRQ_TYPE_EDGE_FALLING>; |
| interrupt-controller; |
| #interrupt-cells = <2>; |
| }; |
| }; |
| |
| &i2c3 { |
| /* Connected to USB Hub */ |
| usb-typec@52 { |
| compatible = "nxp,ptn5110"; |
| reg = <0x52>; |
| pinctrl-names = "default"; |
| pinctrl-0 = <&pinctrl_typec>; |
| interrupt-parent = <&gpio4>; |
| interrupts = <1 IRQ_TYPE_LEVEL_LOW>; |
| |
| connector { |
| compatible = "usb-c-connector"; |
| label = "USB-C"; |
| power-role = "source"; |
| data-role = "host"; |
| source-pdos = <PDO_FIXED(5000, 3000, PDO_FIXED_USB_COMM)>; |
| }; |
| }; |
| }; |
| |
| &i2c4 { |
| pinctrl-names = "default"; |
| pinctrl-0 = <&pinctrl_i2c4>; |
| clock-frequency = <384000>; |
| status = "okay"; |
| |
| wm8962: audio-codec@1a { |
| compatible = "wlf,wm8962"; |
| reg = <0x1a>; |
| pinctrl-names = "default"; |
| pinctrl-0 = <&pinctrl_wm8962>; |
| clocks = <&clk IMX8MP_CLK_IPP_DO_CLKO1>; |
| assigned-clocks = <&clk IMX8MP_CLK_IPP_DO_CLKO1>; |
| assigned-clock-parents = <&clk IMX8MP_AUDIO_PLL2_OUT>; |
| assigned-clock-rates = <22576000>; |
| DCVDD-supply = <®_audio>; |
| DBVDD-supply = <®_audio>; |
| AVDD-supply = <®_audio>; |
| CPVDD-supply = <®_audio>; |
| MICVDD-supply = <®_audio>; |
| PLLVDD-supply = <®_audio>; |
| SPKVDD1-supply = <®_audio>; |
| SPKVDD2-supply = <®_audio>; |
| gpio-cfg = < |
| 0x0000 /* 0:Default */ |
| 0x0000 /* 1:Default */ |
| 0x0000 /* 2:FN_DMICCLK */ |
| 0x0000 /* 3:Default */ |
| 0x0000 /* 4:FN_DMICCDAT */ |
| 0x0000 /* 5:Default */ |
| >; |
| #sound-dai-cells = <0>; |
| }; |
| |
| pca6416: gpio@20 { |
| compatible = "nxp,pcal6416"; |
| reg = <0x20>; |
| pinctrl-names = "default"; |
| pinctrl-0 = <&pinctrl_pcal6414>; |
| gpio-controller; |
| #gpio-cells = <2>; |
| interrupt-parent = <&gpio4>; |
| interrupts = <27 IRQ_TYPE_EDGE_FALLING>; |
| interrupt-controller; |
| #interrupt-cells = <2>; |
| }; |
| |
| pca6416_1: gpio@21 { |
| compatible = "nxp,pcal6416"; |
| reg = <0x21>; |
| gpio-controller; |
| #gpio-cells = <2>; |
| interrupt-parent = <&gpio4>; |
| interrupts = <27 IRQ_TYPE_EDGE_FALLING>; |
| interrupt-controller; |
| #interrupt-cells = <2>; |
| |
| usb-hub-hog { |
| gpio-hog; |
| gpios = <7 0>; |
| output-low; |
| line-name = "USB Hub Enable"; |
| }; |
| }; |
| |
| usb-typec@47 { |
| compatible = "ti,hd3ss3220"; |
| reg = <0x47>; |
| pinctrl-names = "default"; |
| pinctrl-0 = <&pinctrl_hd3ss3220>; |
| interrupt-parent = <&gpio4>; |
| interrupts = <19 IRQ_TYPE_LEVEL_LOW>; |
| |
| ports { |
| #address-cells = <1>; |
| #size-cells = <0>; |
| |
| port@0 { |
| reg = <0>; |
| |
| hd3ss3220_in_ep: endpoint { |
| remote-endpoint = <&ss_ep>; |
| }; |
| }; |
| |
| port@1 { |
| reg = <1>; |
| |
| hd3ss3220_out_ep: endpoint { |
| remote-endpoint = <&usb3_role_switch>; |
| }; |
| }; |
| }; |
| }; |
| }; |
| |
| &pcie { |
| pinctrl-names = "default"; |
| pinctrl-0 = <&pinctrl_pcie>; |
| reset-gpio = <&gpio4 21 GPIO_ACTIVE_LOW>; |
| status = "okay"; |
| }; |
| |
| &pcie_phy { |
| fsl,refclk-pad-mode = <IMX8_PCIE_REFCLK_PAD_INPUT>; |
| clocks = <&pcie0_refclk>; |
| clock-names = "ref"; |
| status = "okay"; |
| }; |
| |
| &sai3 { |
| pinctrl-names = "default"; |
| pinctrl-0 = <&pinctrl_sai3>; |
| assigned-clocks = <&clk IMX8MP_CLK_SAI3>, |
| <&clk IMX8MP_AUDIO_PLL2> ; |
| assigned-clock-parents = <&clk IMX8MP_AUDIO_PLL2_OUT>; |
| assigned-clock-rates = <12288000>, <361267200>; |
| fsl,sai-mclk-direction-output; |
| status = "okay"; |
| }; |
| |
| &snvs_pwrkey { |
| status = "okay"; |
| }; |
| |
| &uart2 { |
| pinctrl-names = "default"; |
| pinctrl-0 = <&pinctrl_uart2>; |
| status = "okay"; |
| }; |
| |
| &uart3 { |
| pinctrl-names = "default"; |
| pinctrl-0 = <&pinctrl_uart3>; |
| assigned-clocks = <&clk IMX8MP_CLK_UART3>; |
| assigned-clock-parents = <&clk IMX8MP_SYS_PLL1_80M>; |
| uart-has-rtscts; |
| status = "okay"; |
| }; |
| |
| &usb3_0 { |
| status = "okay"; |
| }; |
| |
| &usb_dwc3_0 { |
| dr_mode = "otg"; |
| hnp-disable; |
| srp-disable; |
| adp-disable; |
| usb-role-switch; |
| status = "okay"; |
| |
| ports { |
| #address-cells = <1>; |
| #size-cells = <0>; |
| |
| port@0 { |
| reg = <0>; |
| usb3_hs_ep: endpoint { |
| remote-endpoint = <&hs_ep>; |
| }; |
| }; |
| port@1 { |
| reg = <1>; |
| usb3_role_switch: endpoint { |
| remote-endpoint = <&hd3ss3220_out_ep>; |
| }; |
| }; |
| }; |
| }; |
| |
| &usb3_phy0 { |
| vbus-supply = <®_usb1_host_vbus>; |
| status = "okay"; |
| }; |
| |
| &usb3_1 { |
| status = "okay"; |
| }; |
| |
| &usb_dwc3_1 { |
| dr_mode = "host"; |
| status = "okay"; |
| }; |
| |
| &usb3_phy1 { |
| status = "okay"; |
| }; |
| |
| &usdhc2 { |
| pinctrl-names = "default", "state_100mhz", "state_200mhz"; |
| pinctrl-0 = <&pinctrl_usdhc2>, <&pinctrl_usdhc2_gpio>; |
| pinctrl-1 = <&pinctrl_usdhc2_100mhz>, <&pinctrl_usdhc2_gpio>; |
| pinctrl-2 = <&pinctrl_usdhc2_200mhz>, <&pinctrl_usdhc2_gpio>; |
| cd-gpios = <&gpio2 12 GPIO_ACTIVE_LOW>; |
| vmmc-supply = <®_usdhc2_vmmc>; |
| bus-width = <4>; |
| status = "okay"; |
| }; |
| |
| &iomuxc { |
| pinctrl_ecspi2: ecspi2grp { |
| fsl,pins = < |
| MX8MP_IOMUXC_ECSPI2_SCLK__ECSPI2_SCLK 0x82 |
| MX8MP_IOMUXC_ECSPI2_MOSI__ECSPI2_MOSI 0x82 |
| MX8MP_IOMUXC_ECSPI2_MISO__ECSPI2_MISO 0x82 |
| MX8MP_IOMUXC_ECSPI2_SS0__GPIO5_IO13 0x40000 |
| >; |
| }; |
| |
| pinctrl_fec: fecgrp { |
| fsl,pins = < |
| MX8MP_IOMUXC_SAI1_RXD2__ENET1_MDC 0x2 |
| MX8MP_IOMUXC_SAI1_RXD3__ENET1_MDIO 0x2 |
| MX8MP_IOMUXC_SAI1_RXD4__ENET1_RGMII_RD0 0x90 |
| MX8MP_IOMUXC_SAI1_RXD5__ENET1_RGMII_RD1 0x90 |
| MX8MP_IOMUXC_SAI1_RXD6__ENET1_RGMII_RD2 0x90 |
| MX8MP_IOMUXC_SAI1_RXD7__ENET1_RGMII_RD3 0x90 |
| MX8MP_IOMUXC_SAI1_TXC__ENET1_RGMII_RXC 0x90 |
| MX8MP_IOMUXC_SAI1_TXFS__ENET1_RGMII_RX_CTL 0x90 |
| MX8MP_IOMUXC_SAI1_TXD0__ENET1_RGMII_TD0 0x16 |
| MX8MP_IOMUXC_SAI1_TXD1__ENET1_RGMII_TD1 0x16 |
| MX8MP_IOMUXC_SAI1_TXD2__ENET1_RGMII_TD2 0x16 |
| MX8MP_IOMUXC_SAI1_TXD3__ENET1_RGMII_TD3 0x16 |
| MX8MP_IOMUXC_SAI1_TXD4__ENET1_RGMII_TX_CTL 0x16 |
| MX8MP_IOMUXC_SAI1_TXD5__ENET1_RGMII_TXC 0x16 |
| MX8MP_IOMUXC_SAI1_RXD0__GPIO4_IO02 0x140 |
| MX8MP_IOMUXC_SAI1_TXD6__GPIO4_IO18 0x10 |
| >; |
| }; |
| |
| pinctrl_flexcan1: flexcan1grp { |
| fsl,pins = < |
| MX8MP_IOMUXC_SPDIF_RX__CAN1_RX 0x154 |
| MX8MP_IOMUXC_SPDIF_TX__CAN1_TX 0x154 |
| >; |
| }; |
| |
| pinctrl_hd3ss3220: hd3ss3220grp { |
| fsl,pins = < |
| MX8MP_IOMUXC_SAI1_TXD7__GPIO4_IO19 0x140 |
| >; |
| }; |
| |
| pinctrl_i2c2: i2c2grp { |
| fsl,pins = < |
| MX8MP_IOMUXC_I2C2_SCL__I2C2_SCL 0x400001c2 |
| MX8MP_IOMUXC_I2C2_SDA__I2C2_SDA 0x400001c2 |
| >; |
| }; |
| |
| pinctrl_i2c4: i2c4grp { |
| fsl,pins = < |
| MX8MP_IOMUXC_I2C4_SCL__I2C4_SCL 0x400001c2 |
| MX8MP_IOMUXC_I2C4_SDA__I2C4_SDA 0x400001c2 |
| >; |
| }; |
| |
| pinctrl_led3: led3grp { |
| fsl,pins = < |
| MX8MP_IOMUXC_SAI3_RXFS__GPIO4_IO28 0x41 |
| >; |
| }; |
| |
| pinctrl_pcal6414: pcal6414-gpiogrp { |
| fsl,pins = < |
| MX8MP_IOMUXC_SAI2_MCLK__GPIO4_IO27 0x10 |
| >; |
| }; |
| |
| pinctrl_pcie: pciegrp { |
| fsl,pins = < |
| MX8MP_IOMUXC_GPIO1_IO05__GPIO1_IO05 0x10 /* PCIe_nDIS */ |
| MX8MP_IOMUXC_SAI2_RXFS__GPIO4_IO21 0x10 /* PCIe_nRST */ |
| >; |
| }; |
| |
| pinctrl_reg_usdhc2_vmmc: regusdhc2vmmcgrp { |
| fsl,pins = < |
| MX8MP_IOMUXC_SD2_RESET_B__GPIO2_IO19 0x40 |
| >; |
| }; |
| |
| pinctrl_sai3: sai3grp { |
| fsl,pins = < |
| MX8MP_IOMUXC_SAI3_TXFS__AUDIOMIX_SAI3_TX_SYNC 0xd6 |
| MX8MP_IOMUXC_SAI3_TXC__AUDIOMIX_SAI3_TX_BCLK 0xd6 |
| MX8MP_IOMUXC_SAI3_RXD__AUDIOMIX_SAI3_RX_DATA00 0xd6 |
| MX8MP_IOMUXC_SAI3_TXD__AUDIOMIX_SAI3_TX_DATA00 0xd6 |
| MX8MP_IOMUXC_SAI3_MCLK__AUDIOMIX_SAI3_MCLK 0xd6 |
| >; |
| }; |
| |
| pinctrl_tpm: tpmgrp { |
| fsl,pins = < |
| MX8MP_IOMUXC_SAI1_RXFS__GPIO4_IO00 0x19 /* Reset */ |
| MX8MP_IOMUXC_SAI3_RXC__GPIO4_IO29 0x1d6 /* IRQ */ |
| >; |
| }; |
| |
| pinctrl_typec: typec1grp { |
| fsl,pins = < |
| MX8MP_IOMUXC_SAI1_RXC__GPIO4_IO01 0xc4 |
| >; |
| }; |
| |
| pinctrl_uart2: uart2grp { |
| fsl,pins = < |
| MX8MP_IOMUXC_UART2_RXD__UART2_DCE_RX 0x140 |
| MX8MP_IOMUXC_UART2_TXD__UART2_DCE_TX 0x140 |
| >; |
| }; |
| |
| pinctrl_uart3: uart3grp { |
| fsl,pins = < |
| MX8MP_IOMUXC_ECSPI1_SCLK__UART3_DCE_RX 0x140 |
| MX8MP_IOMUXC_ECSPI1_MOSI__UART3_DCE_TX 0x140 |
| MX8MP_IOMUXC_ECSPI1_SS0__UART3_DCE_RTS 0x140 |
| MX8MP_IOMUXC_ECSPI1_MISO__UART3_DCE_CTS 0x140 |
| >; |
| }; |
| |
| pinctrl_usdhc2: usdhc2grp { |
| fsl,pins = < |
| MX8MP_IOMUXC_SD2_CLK__USDHC2_CLK 0x190 |
| MX8MP_IOMUXC_SD2_CMD__USDHC2_CMD 0x1d0 |
| MX8MP_IOMUXC_SD2_DATA0__USDHC2_DATA0 0x1d0 |
| MX8MP_IOMUXC_SD2_DATA1__USDHC2_DATA1 0x1d0 |
| MX8MP_IOMUXC_SD2_DATA2__USDHC2_DATA2 0x1d0 |
| MX8MP_IOMUXC_SD2_DATA3__USDHC2_DATA3 0x1d0 |
| MX8MP_IOMUXC_GPIO1_IO04__USDHC2_VSELECT 0xc0 |
| >; |
| }; |
| |
| pinctrl_usdhc2_100mhz: usdhc2-100mhzgrp { |
| fsl,pins = < |
| MX8MP_IOMUXC_SD2_CLK__USDHC2_CLK 0x194 |
| MX8MP_IOMUXC_SD2_CMD__USDHC2_CMD 0x1d4 |
| MX8MP_IOMUXC_SD2_DATA0__USDHC2_DATA0 0x1d4 |
| MX8MP_IOMUXC_SD2_DATA1__USDHC2_DATA1 0x1d4 |
| MX8MP_IOMUXC_SD2_DATA2__USDHC2_DATA2 0x1d4 |
| MX8MP_IOMUXC_SD2_DATA3__USDHC2_DATA3 0x1d4 |
| MX8MP_IOMUXC_GPIO1_IO04__USDHC2_VSELECT 0xc0 |
| >; |
| }; |
| |
| pinctrl_usdhc2_200mhz: usdhc2-200mhzgrp { |
| fsl,pins = < |
| MX8MP_IOMUXC_SD2_CLK__USDHC2_CLK 0x196 |
| MX8MP_IOMUXC_SD2_CMD__USDHC2_CMD 0x1d6 |
| MX8MP_IOMUXC_SD2_DATA0__USDHC2_DATA0 0x1d6 |
| MX8MP_IOMUXC_SD2_DATA1__USDHC2_DATA1 0x1d6 |
| MX8MP_IOMUXC_SD2_DATA2__USDHC2_DATA2 0x1d6 |
| MX8MP_IOMUXC_SD2_DATA3__USDHC2_DATA3 0x1d6 |
| MX8MP_IOMUXC_GPIO1_IO04__USDHC2_VSELECT 0xc0 |
| >; |
| }; |
| |
| pinctrl_usdhc2_gpio: usdhc2gpiogrp { |
| fsl,pins = < |
| MX8MP_IOMUXC_SD2_CD_B__GPIO2_IO12 0x1c4 |
| >; |
| }; |
| |
| pinctrl_wm8962: wm8962grp { |
| fsl,pins = < |
| MX8MP_IOMUXC_GPIO1_IO14__CCM_CLKO1 0x59 |
| >; |
| }; |
| }; |
