| // SPDX-License-Identifier: (GPL-2.0+ OR MIT) |
| /* |
| * Copyright (C) 2022 Marek Vasut <marex@denx.de> |
| */ |
| |
| /dts-v1/; |
| |
| #include <dt-bindings/net/qca-ar803x.h> |
| #include "imx8mp.dtsi" |
| |
| / { |
| model = "Data Modul i.MX8M Plus eDM SBC"; |
| compatible = "dmo,imx8mp-data-modul-edm-sbc", "fsl,imx8mp"; |
| |
| aliases { |
| rtc0 = &rtc; |
| rtc1 = &snvs_rtc; |
| }; |
| |
| chosen { |
| stdout-path = &uart3; |
| }; |
| |
| memory@40000000 { |
| device_type = "memory"; |
| /* There are 1/2/4 GiB options, adjusted by bootloader. */ |
| reg = <0x0 0x40000000 0 0x40000000>; |
| }; |
| |
| backlight: backlight { |
| compatible = "pwm-backlight"; |
| pinctrl-names = "default"; |
| pinctrl-0 = <&pinctrl_panel_backlight>; |
| brightness-levels = <0 1 10 20 30 40 50 60 70 75 80 90 100>; |
| default-brightness-level = <7>; |
| enable-gpios = <&gpio3 0 GPIO_ACTIVE_HIGH>; |
| pwms = <&pwm1 0 5000000 0>; |
| /* Disabled by default, unless display board plugged in. */ |
| status = "disabled"; |
| }; |
| |
| clk_xtal25: clock-xtal25 { |
| compatible = "fixed-clock"; |
| #clock-cells = <0>; |
| clock-frequency = <25000000>; |
| }; |
| |
| panel: panel { |
| /* Compatible string is filled in by panel board DT Overlay. */ |
| backlight = <&backlight>; |
| power-supply = <®_panel_vcc>; |
| /* Disabled by default, unless display board plugged in. */ |
| status = "disabled"; |
| }; |
| |
| reg_panel_vcc: regulator-panel-vcc { |
| compatible = "regulator-fixed"; |
| pinctrl-names = "default"; |
| pinctrl-0 = <&pinctrl_panel_vcc_reg>; |
| regulator-min-microvolt = <5000000>; |
| regulator-max-microvolt = <5000000>; |
| regulator-name = "PANEL_VCC"; |
| /* GPIO flags are ignored, enable-active-high applies. */ |
| gpio = <&gpio3 6 GPIO_ACTIVE_HIGH>; |
| enable-active-high; |
| /* Disabled by default, unless display board plugged in. */ |
| status = "disabled"; |
| }; |
| |
| reg_usdhc2_vmmc: regulator-usdhc2-vmmc { |
| compatible = "regulator-fixed"; |
| pinctrl-names = "default"; |
| pinctrl-0 = <&pinctrl_usdhc2_vmmc>; |
| regulator-max-microvolt = <3300000>; |
| regulator-min-microvolt = <3300000>; |
| regulator-name = "VDD_3V3_SD"; |
| /* GPIO flags are ignored, enable-active-high applies. */ |
| gpio = <&gpio2 19 GPIO_ACTIVE_HIGH>; /* SD2_RESET */ |
| enable-active-high; |
| off-on-delay-us = <12000>; |
| startup-delay-us = <100>; |
| vin-supply = <&buck4>; |
| }; |
| |
| watchdog { /* TPS3813 */ |
| compatible = "linux,wdt-gpio"; |
| pinctrl-names = "default"; |
| pinctrl-0 = <&pinctrl_watchdog_gpio>; |
| always-running; |
| gpios = <&gpio2 8 GPIO_ACTIVE_HIGH>; |
| hw_algo = "level"; |
| /* Reset triggers in 2..3 seconds */ |
| hw_margin_ms = <1500>; |
| /* Disabled by default */ |
| status = "disabled"; |
| }; |
| }; |
| |
| &A53_0 { |
| cpu-supply = <&buck2>; |
| }; |
| |
| &A53_1 { |
| cpu-supply = <&buck2>; |
| }; |
| |
| &A53_2 { |
| cpu-supply = <&buck2>; |
| }; |
| |
| &A53_3 { |
| cpu-supply = <&buck2>; |
| }; |
| |
| &ecspi1 { |
| pinctrl-names = "default"; |
| pinctrl-0 = <&pinctrl_ecspi1>; |
| cs-gpios = <&gpio5 9 GPIO_ACTIVE_LOW>; |
| status = "okay"; |
| |
| flash@0 { /* W25Q128JVEI */ |
| compatible = "jedec,spi-nor"; |
| reg = <0>; |
| spi-max-frequency = <100000000>; /* Up to 133 MHz */ |
| spi-tx-bus-width = <1>; |
| spi-rx-bus-width = <1>; |
| }; |
| }; |
| |
| &ecspi2 { /* Feature connector SPI */ |
| pinctrl-names = "default"; |
| pinctrl-0 = <&pinctrl_ecspi2>; |
| cs-gpios = <&gpio5 13 GPIO_ACTIVE_LOW>; |
| /* Disabled by default, unless feature board plugged in. */ |
| status = "disabled"; |
| }; |
| |
| &ecspi3 { /* Display connector SPI */ |
| pinctrl-names = "default"; |
| pinctrl-0 = <&pinctrl_ecspi3>; |
| cs-gpios = <&gpio5 25 GPIO_ACTIVE_LOW>; |
| /* Disabled by default, unless display board plugged in. */ |
| status = "disabled"; |
| }; |
| |
| &eqos { /* First ethernet */ |
| pinctrl-names = "default"; |
| pinctrl-0 = <&pinctrl_eqos>; |
| phy-handle = <&phy_eqos>; |
| phy-mode = "rgmii-id"; |
| status = "okay"; |
| |
| mdio { |
| compatible = "snps,dwmac-mdio"; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| |
| /* Atheros AR8031 PHY */ |
| phy_eqos: ethernet-phy@0 { |
| compatible = "ethernet-phy-ieee802.3-c22"; |
| reg = <0>; |
| /* |
| * Dedicated ENET_WOL# signal is unused, the PHY |
| * can wake the SoC up via INT signal as well. |
| */ |
| interrupts-extended = <&gpio1 11 IRQ_TYPE_LEVEL_LOW>; |
| reset-gpios = <&gpio1 15 GPIO_ACTIVE_LOW>; |
| reset-assert-us = <10000>; |
| reset-deassert-us = <10000>; |
| qca,keep-pll-enabled; |
| vddio-supply = <&vddio_eqos>; |
| |
| vddio_eqos: vddio-regulator { |
| regulator-name = "VDDIO_EQOS"; |
| regulator-min-microvolt = <1800000>; |
| regulator-max-microvolt = <1800000>; |
| }; |
| |
| vddh_eqos: vddh-regulator { |
| regulator-name = "VDDH_EQOS"; |
| }; |
| }; |
| }; |
| }; |
| |
| &fec { /* Second ethernet */ |
| pinctrl-names = "default"; |
| pinctrl-0 = <&pinctrl_fec>; |
| phy-handle = <&phy_fec>; |
| phy-mode = "rgmii-id"; |
| fsl,magic-packet; |
| status = "okay"; |
| |
| mdio { |
| #address-cells = <1>; |
| #size-cells = <0>; |
| |
| /* Atheros AR8031 PHY */ |
| phy_fec: ethernet-phy@0 { |
| compatible = "ethernet-phy-ieee802.3-c22"; |
| reg = <0>; |
| /* |
| * Dedicated ENET_WOL# signal is unused, the PHY |
| * can wake the SoC up via INT signal as well. |
| */ |
| interrupts-extended = <&gpio2 2 IRQ_TYPE_LEVEL_LOW>; |
| reset-gpios = <&gpio2 9 GPIO_ACTIVE_LOW>; |
| reset-assert-us = <10000>; |
| reset-deassert-us = <10000>; |
| qca,keep-pll-enabled; |
| vddio-supply = <&vddio_fec>; |
| |
| vddio_fec: vddio-regulator { |
| regulator-name = "VDDIO_FEC"; |
| regulator-min-microvolt = <1800000>; |
| regulator-max-microvolt = <1800000>; |
| }; |
| |
| vddh_fec: vddh-regulator { |
| regulator-name = "VDDH_FEC"; |
| }; |
| }; |
| }; |
| }; |
| |
| &flexcan1 { |
| pinctrl-names = "default"; |
| pinctrl-0 = <&pinctrl_flexcan1>; |
| status = "okay"; |
| }; |
| |
| &gpio1 { |
| gpio-line-names = |
| "", "USBHUB_RESET#", "WDOG_B#", "PMIC_INT#", |
| "", "M2_PCIE_RST#", "M2_PCIE_WAKE#", "GPIO5_IO03", |
| "GPIO5_IO04", "PDM_SEL", "ENET_WOL#", "ENET_INT#", |
| "", "", "", "ENET_RST#", |
| "", "", "", "", "", "", "", "", |
| "", "", "", "", "", "", "", ""; |
| }; |
| |
| &gpio2 { |
| gpio-line-names = |
| "", "", "ENET2_INT#", "", "", "", "", "", |
| "WDOG_KICK#", "ENET2_RST#", "CAN_INT#", "RTC_IRQ#", |
| "", "", "", "", |
| "", "", "", "SD2_RESET#", "", "", "", "", |
| "", "", "", "", "", "", "", ""; |
| }; |
| |
| &gpio3 { |
| gpio-line-names = |
| "BL_ENABLE_1V8", "PG_V_IN_VAR#", "", "", |
| "", "", "TFT_ENABLE_1V8", "GRAPHICS_GPIO0_1V8", |
| "CSI2_PD_1V8", "CSI2_RESET_1V8#", "", "", |
| "", "", "EEPROM_WP_1V8#", "", "", "", "", "", |
| "MEMCFG0", "PCIE_CLK_GEN_CLKPWRGD_PD_1V8#", |
| "", "M2_W_DISABLE1_1V8#", |
| "M2_W_DISABLE2_1V8#", "", "I2C5_SCL_3V3", "I2C5_SDA_3V3", |
| "", "", "", ""; |
| }; |
| |
| &gpio4 { |
| gpio-line-names = |
| "DSI_RESET_1V8#", "MEMCFG2", "", "MEMCFG1", "", "", "", "", |
| "", "", "", "", "", "", "", "", |
| "", "", "GRAPHICS_PRSNT_1V8#", "DSI_IRQ_1V8#", |
| "", "DIS_USB_DN1", "DIS_USB_DN2", "", |
| "", "", "", "", "", "", "", ""; |
| }; |
| |
| &gpio5 { |
| gpio-line-names = |
| "", "", "", "", "", "WDOG_EN", "", "", |
| "", "SPI1_CS#", "", "", |
| "", "SPI2_CS#", "I2C1_SCL_3V3", "I2C1_SDA_3V3", |
| "I2C2_SCL_3V3", "I2C2_SDA_3V3", "I2C3_SCL_3V3", "I2C3_SDA_3V3", |
| "", "", "", "", |
| "", "SPI3_CS#", "", "", "", "", "", ""; |
| }; |
| |
| &i2c1 { |
| clock-frequency = <100000>; |
| pinctrl-names = "default", "gpio"; |
| pinctrl-0 = <&pinctrl_i2c1>; |
| pinctrl-1 = <&pinctrl_i2c1_gpio>; |
| scl-gpios = <&gpio5 14 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; |
| sda-gpios = <&gpio5 15 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; |
| status = "okay"; |
| |
| usb-hub@2c { |
| compatible = "microchip,usb2514bi"; |
| reg = <0x2c>; |
| pinctrl-names = "default"; |
| pinctrl-0 = <&pinctrl_usb_hub>; |
| individual-port-switching; |
| reset-gpios = <&gpio1 1 GPIO_ACTIVE_LOW>; |
| self-powered; |
| }; |
| |
| eeprom: eeprom@50 { |
| compatible = "atmel,24c32"; |
| reg = <0x50>; |
| pagesize = <32>; |
| }; |
| |
| rtc: rtc@68 { |
| compatible = "st,m41t62"; |
| reg = <0x68>; |
| pinctrl-names = "default"; |
| pinctrl-0 = <&pinctrl_rtc>; |
| interrupts-extended = <&gpio2 11 IRQ_TYPE_LEVEL_LOW>; |
| }; |
| |
| pcieclk: clk@6a { |
| compatible = "renesas,9fgv0241"; |
| reg = <0x6a>; |
| clocks = <&clk_xtal25>; |
| #clock-cells = <1>; |
| }; |
| }; |
| |
| &i2c2 { |
| clock-frequency = <100000>; |
| pinctrl-names = "default", "gpio"; |
| pinctrl-0 = <&pinctrl_i2c2>; |
| pinctrl-1 = <&pinctrl_i2c2_gpio>; |
| scl-gpios = <&gpio5 16 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; |
| sda-gpios = <&gpio5 17 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; |
| status = "okay"; |
| }; |
| |
| &i2c3 { |
| clock-frequency = <100000>; |
| pinctrl-names = "default", "gpio"; |
| pinctrl-0 = <&pinctrl_i2c3>; |
| pinctrl-1 = <&pinctrl_i2c3_gpio>; |
| scl-gpios = <&gpio5 18 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; |
| sda-gpios = <&gpio5 19 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; |
| status = "okay"; |
| |
| pmic: pmic@25 { |
| compatible = "nxp,pca9450c"; |
| reg = <0x25>; |
| pinctrl-names = "default"; |
| pinctrl-0 = <&pinctrl_pmic>; |
| interrupt-parent = <&gpio1>; |
| interrupts = <3 IRQ_TYPE_LEVEL_LOW>; |
| |
| /* |
| * i.MX 8M Plus Data Sheet for Consumer Products |
| * 3.1.4 Operating ranges |
| * MIMX8ML8CVNKZAB |
| */ |
| regulators { |
| buck1: BUCK1 { /* VDD_SOC (dual-phase with BUCK3) */ |
| regulator-min-microvolt = <850000>; |
| regulator-max-microvolt = <1000000>; |
| regulator-ramp-delay = <3125>; |
| regulator-always-on; |
| regulator-boot-on; |
| }; |
| |
| buck2: BUCK2 { /* VDD_ARM */ |
| regulator-min-microvolt = <850000>; |
| regulator-max-microvolt = <1000000>; |
| regulator-ramp-delay = <3125>; |
| regulator-always-on; |
| regulator-boot-on; |
| }; |
| |
| buck4: BUCK4 { /* VDD_3V3 */ |
| regulator-min-microvolt = <3300000>; |
| regulator-max-microvolt = <3300000>; |
| regulator-always-on; |
| regulator-boot-on; |
| }; |
| |
| buck5: BUCK5 { /* VDD_1V8 */ |
| regulator-min-microvolt = <1800000>; |
| regulator-max-microvolt = <1800000>; |
| regulator-always-on; |
| regulator-boot-on; |
| }; |
| |
| buck6: BUCK6 { /* NVCC_DRAM_1V1 */ |
| regulator-min-microvolt = <1100000>; |
| regulator-max-microvolt = <1100000>; |
| regulator-always-on; |
| regulator-boot-on; |
| }; |
| |
| ldo1: LDO1 { /* NVCC_SNVS_1V8 */ |
| regulator-min-microvolt = <1800000>; |
| regulator-max-microvolt = <1800000>; |
| regulator-always-on; |
| regulator-boot-on; |
| }; |
| |
| ldo3: LDO3 { /* VDDA_1V8 */ |
| regulator-min-microvolt = <1800000>; |
| regulator-max-microvolt = <1800000>; |
| regulator-always-on; |
| regulator-boot-on; |
| }; |
| |
| ldo4: LDO4 { /* PMIC_LDO4 */ |
| regulator-min-microvolt = <3300000>; |
| regulator-max-microvolt = <3300000>; |
| }; |
| |
| ldo5: LDO5 { /* NVCC_SD2 */ |
| regulator-min-microvolt = <1800000>; |
| regulator-max-microvolt = <3300000>; |
| }; |
| }; |
| }; |
| }; |
| |
| &i2c5 { /* HDMI EDID bus */ |
| clock-frequency = <100000>; |
| pinctrl-names = "default", "gpio"; |
| pinctrl-0 = <&pinctrl_i2c5>; |
| pinctrl-1 = <&pinctrl_i2c5_gpio>; |
| scl-gpios = <&gpio3 26 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; |
| sda-gpios = <&gpio3 27 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; |
| status = "okay"; |
| }; |
| |
| &pwm1 { |
| pinctrl-names = "default"; |
| pinctrl-0 = <&pinctrl_panel_pwm>; |
| /* Disabled by default, unless display board plugged in. */ |
| status = "disabled"; |
| }; |
| |
| /* SD slot */ |
| &usdhc2 { |
| pinctrl-names = "default", "state_100mhz", "state_200mhz"; |
| pinctrl-0 = <&pinctrl_usdhc2>, <&pinctrl_usdhc2_gpio>; |
| pinctrl-1 = <&pinctrl_usdhc2_100mhz>, <&pinctrl_usdhc2_gpio>; |
| pinctrl-2 = <&pinctrl_usdhc2_200mhz>, <&pinctrl_usdhc2_gpio>; |
| cd-gpios = <&gpio2 12 GPIO_ACTIVE_LOW>; |
| vmmc-supply = <®_usdhc2_vmmc>; |
| bus-width = <4>; |
| status = "okay"; |
| }; |
| |
| /* eMMC */ |
| &usdhc3 { |
| pinctrl-names = "default", "state_100mhz", "state_200mhz"; |
| pinctrl-0 = <&pinctrl_usdhc3>; |
| pinctrl-1 = <&pinctrl_usdhc3_100mhz>; |
| pinctrl-2 = <&pinctrl_usdhc3_200mhz>; |
| vmmc-supply = <&buck4>; |
| vqmmc-supply = <&buck5>; |
| bus-width = <8>; |
| no-sd; |
| no-sdio; |
| non-removable; |
| status = "okay"; |
| }; |
| |
| &uart1 { /* RS485 */ |
| pinctrl-names = "default"; |
| pinctrl-0 = <&pinctrl_uart1>; |
| uart-has-rtscts; |
| status = "disabled"; /* Optional */ |
| }; |
| |
| &uart2 { |
| pinctrl-names = "default"; |
| pinctrl-0 = <&pinctrl_uart2>; |
| uart-has-rtscts; |
| status = "okay"; |
| }; |
| |
| &uart3 { /* A53 Debug */ |
| pinctrl-names = "default"; |
| pinctrl-0 = <&pinctrl_uart3>; |
| status = "okay"; |
| }; |
| |
| &uart4 { |
| pinctrl-names = "default"; |
| pinctrl-0 = <&pinctrl_uart4>; |
| status = "okay"; |
| }; |
| |
| &usb3_phy0 { |
| status = "okay"; |
| }; |
| |
| &usb3_0 { |
| fsl,over-current-active-low; |
| status = "okay"; |
| }; |
| |
| &usb_dwc3_0 { /* Lower plug direct */ |
| pinctrl-names = "default"; |
| pinctrl-0 = <&pinctrl_usb1>; |
| dr_mode = "host"; |
| status = "okay"; |
| }; |
| |
| &usb3_phy1 { |
| status = "okay"; |
| }; |
| |
| &usb3_1 { |
| status = "okay"; |
| }; |
| |
| &usb_dwc3_1 { /* Upper plug via HUB */ |
| dr_mode = "host"; |
| status = "okay"; |
| }; |
| |
| &wdog1 { |
| status = "okay"; |
| }; |
| |
| /* IOMUXC node should be at the end of DT to improve readability. */ |
| &iomuxc { |
| pinctrl-names = "default"; |
| pinctrl-0 = <&pinctrl_hog_feature>, <&pinctrl_hog_misc>, |
| <&pinctrl_hog_panel>, <&pinctrl_hog_sbc>, |
| <&pinctrl_panel_expansion>; |
| |
| pinctrl_ecspi1: ecspi1-grp { |
| fsl,pins = < |
| MX8MP_IOMUXC_ECSPI1_SCLK__ECSPI1_SCLK 0x44 |
| MX8MP_IOMUXC_ECSPI1_MOSI__ECSPI1_MOSI 0x44 |
| MX8MP_IOMUXC_ECSPI1_MISO__ECSPI1_MISO 0x44 |
| MX8MP_IOMUXC_ECSPI1_SS0__GPIO5_IO09 0x40 |
| >; |
| }; |
| |
| pinctrl_ecspi2: ecspi2-grp { |
| fsl,pins = < |
| MX8MP_IOMUXC_ECSPI2_SCLK__ECSPI2_SCLK 0x44 |
| MX8MP_IOMUXC_ECSPI2_MOSI__ECSPI2_MOSI 0x44 |
| MX8MP_IOMUXC_ECSPI2_MISO__ECSPI2_MISO 0x44 |
| MX8MP_IOMUXC_ECSPI2_SS0__GPIO5_IO13 0x40 |
| >; |
| }; |
| |
| pinctrl_ecspi3: ecspi3-grp { |
| fsl,pins = < |
| MX8MP_IOMUXC_UART1_RXD__ECSPI3_SCLK 0x44 |
| MX8MP_IOMUXC_UART1_TXD__ECSPI3_MOSI 0x44 |
| MX8MP_IOMUXC_UART2_RXD__ECSPI3_MISO 0x44 |
| MX8MP_IOMUXC_UART2_TXD__GPIO5_IO25 0x40 |
| >; |
| }; |
| |
| pinctrl_eqos: eqos-grp { |
| fsl,pins = < |
| MX8MP_IOMUXC_ENET_MDC__ENET_QOS_MDC 0x3 |
| MX8MP_IOMUXC_ENET_MDIO__ENET_QOS_MDIO 0x3 |
| MX8MP_IOMUXC_ENET_TX_CTL__ENET_QOS_RGMII_TX_CTL 0x1f |
| MX8MP_IOMUXC_ENET_TXC__CCM_ENET_QOS_CLOCK_GENERATE_TX_CLK 0x1f |
| MX8MP_IOMUXC_ENET_TD0__ENET_QOS_RGMII_TD0 0x1f |
| MX8MP_IOMUXC_ENET_TD1__ENET_QOS_RGMII_TD1 0x1f |
| MX8MP_IOMUXC_ENET_TD2__ENET_QOS_RGMII_TD2 0x1f |
| MX8MP_IOMUXC_ENET_TD3__ENET_QOS_RGMII_TD3 0x1f |
| MX8MP_IOMUXC_ENET_RXC__CCM_ENET_QOS_CLOCK_GENERATE_RX_CLK 0x91 |
| MX8MP_IOMUXC_ENET_RX_CTL__ENET_QOS_RGMII_RX_CTL 0x91 |
| MX8MP_IOMUXC_ENET_RD0__ENET_QOS_RGMII_RD0 0x91 |
| MX8MP_IOMUXC_ENET_RD1__ENET_QOS_RGMII_RD1 0x91 |
| MX8MP_IOMUXC_ENET_RD2__ENET_QOS_RGMII_RD2 0x91 |
| MX8MP_IOMUXC_ENET_RD3__ENET_QOS_RGMII_RD3 0x91 |
| /* ENET_RST# */ |
| MX8MP_IOMUXC_GPIO1_IO15__GPIO1_IO15 0x6 |
| /* ENET_INT# */ |
| MX8MP_IOMUXC_GPIO1_IO11__GPIO1_IO11 0x40000090 |
| >; |
| }; |
| |
| pinctrl_fec: fec-grp { |
| fsl,pins = < |
| MX8MP_IOMUXC_SAI1_RXD2__ENET1_MDC 0x3 |
| MX8MP_IOMUXC_SAI1_RXD3__ENET1_MDIO 0x3 |
| MX8MP_IOMUXC_SAI1_RXD4__ENET1_RGMII_RD0 0x91 |
| MX8MP_IOMUXC_SAI1_RXD5__ENET1_RGMII_RD1 0x91 |
| MX8MP_IOMUXC_SAI1_RXD6__ENET1_RGMII_RD2 0x91 |
| MX8MP_IOMUXC_SAI1_RXD7__ENET1_RGMII_RD3 0x91 |
| MX8MP_IOMUXC_SAI1_TXC__ENET1_RGMII_RXC 0x91 |
| MX8MP_IOMUXC_SAI1_TXFS__ENET1_RGMII_RX_CTL 0x91 |
| MX8MP_IOMUXC_SAI1_TXD0__ENET1_RGMII_TD0 0x1f |
| MX8MP_IOMUXC_SAI1_TXD1__ENET1_RGMII_TD1 0x1f |
| MX8MP_IOMUXC_SAI1_TXD2__ENET1_RGMII_TD2 0x1f |
| MX8MP_IOMUXC_SAI1_TXD3__ENET1_RGMII_TD3 0x1f |
| MX8MP_IOMUXC_SAI1_TXD4__ENET1_RGMII_TX_CTL 0x1f |
| MX8MP_IOMUXC_SAI1_TXD5__ENET1_RGMII_TXC 0x1f |
| /* ENET2_RST# */ |
| MX8MP_IOMUXC_SD1_DATA7__GPIO2_IO09 0x6 |
| /* ENET2_INT# */ |
| MX8MP_IOMUXC_SD1_DATA0__GPIO2_IO02 0x40000090 |
| >; |
| }; |
| |
| pinctrl_flexcan1: flexcan1-grp { |
| fsl,pins = < |
| MX8MP_IOMUXC_SPDIF_RX__CAN1_RX 0x154 |
| MX8MP_IOMUXC_SPDIF_TX__CAN1_TX 0x154 |
| >; |
| }; |
| |
| pinctrl_hog_feature: hog-feature-grp { |
| fsl,pins = < |
| /* GPIO5_IO03 */ |
| MX8MP_IOMUXC_GPIO1_IO07__GPIO1_IO07 0x40000006 |
| /* GPIO5_IO04 */ |
| MX8MP_IOMUXC_GPIO1_IO08__GPIO1_IO08 0x40000006 |
| |
| /* CAN_INT# */ |
| MX8MP_IOMUXC_SD1_RESET_B__GPIO2_IO10 0x40000090 |
| >; |
| }; |
| |
| pinctrl_hog_panel: hog-panel-grp { |
| fsl,pins = < |
| /* GRAPHICS_GPIO0_1V8 */ |
| MX8MP_IOMUXC_NAND_DATA01__GPIO3_IO07 0x26 |
| >; |
| }; |
| |
| pinctrl_hog_misc: hog-misc-grp { |
| fsl,pins = < |
| /* ENET_WOL# -- shared by both PHYs */ |
| MX8MP_IOMUXC_GPIO1_IO10__GPIO1_IO10 0x40000090 |
| |
| /* PG_V_IN_VAR# */ |
| MX8MP_IOMUXC_NAND_CE0_B__GPIO3_IO01 0x40000000 |
| /* CSI2_PD_1V8 */ |
| MX8MP_IOMUXC_NAND_DATA02__GPIO3_IO08 0x0 |
| /* CSI2_RESET_1V8# */ |
| MX8MP_IOMUXC_NAND_DATA03__GPIO3_IO09 0x0 |
| |
| /* DIS_USB_DN1 */ |
| MX8MP_IOMUXC_SAI2_RXFS__GPIO4_IO21 0x0 |
| /* DIS_USB_DN2 */ |
| MX8MP_IOMUXC_SAI2_RXC__GPIO4_IO22 0x0 |
| |
| /* EEPROM_WP_1V8# */ |
| MX8MP_IOMUXC_NAND_DQS__GPIO3_IO14 0x100 |
| /* PCIE_CLK_GEN_CLKPWRGD_PD_1V8# */ |
| MX8MP_IOMUXC_SAI5_RXD0__GPIO3_IO21 0x0 |
| /* GRAPHICS_PRSNT_1V8# */ |
| MX8MP_IOMUXC_SAI1_TXD6__GPIO4_IO18 0x40000000 |
| |
| /* CLK_CCM_CLKO1_3V3 */ |
| MX8MP_IOMUXC_GPIO1_IO14__CCM_CLKO1 0x10 |
| >; |
| }; |
| |
| pinctrl_hog_sbc: hog-sbc-grp { |
| fsl,pins = < |
| /* MEMCFG[0..2] straps */ |
| MX8MP_IOMUXC_SAI5_RXC__GPIO3_IO20 0x40000140 |
| MX8MP_IOMUXC_SAI1_RXD1__GPIO4_IO03 0x40000140 |
| MX8MP_IOMUXC_SAI1_RXC__GPIO4_IO01 0x40000140 |
| >; |
| }; |
| |
| pinctrl_i2c1: i2c1-grp { |
| fsl,pins = < |
| MX8MP_IOMUXC_I2C1_SCL__I2C1_SCL 0x40000084 |
| MX8MP_IOMUXC_I2C1_SDA__I2C1_SDA 0x40000084 |
| >; |
| }; |
| |
| pinctrl_i2c1_gpio: i2c1-gpio-grp { |
| fsl,pins = < |
| MX8MP_IOMUXC_I2C1_SCL__GPIO5_IO14 0x84 |
| MX8MP_IOMUXC_I2C1_SDA__GPIO5_IO15 0x84 |
| >; |
| }; |
| |
| pinctrl_i2c2: i2c2-grp { |
| fsl,pins = < |
| MX8MP_IOMUXC_I2C2_SCL__I2C2_SCL 0x40000084 |
| MX8MP_IOMUXC_I2C2_SDA__I2C2_SDA 0x40000084 |
| >; |
| }; |
| |
| pinctrl_i2c2_gpio: i2c2-gpio-grp { |
| fsl,pins = < |
| MX8MP_IOMUXC_I2C2_SCL__GPIO5_IO16 0x84 |
| MX8MP_IOMUXC_I2C2_SDA__GPIO5_IO17 0x84 |
| >; |
| }; |
| |
| pinctrl_i2c3: i2c3-grp { |
| fsl,pins = < |
| MX8MP_IOMUXC_I2C3_SCL__I2C3_SCL 0x40000084 |
| MX8MP_IOMUXC_I2C3_SDA__I2C3_SDA 0x40000084 |
| >; |
| }; |
| |
| pinctrl_i2c3_gpio: i2c3-gpio-grp { |
| fsl,pins = < |
| MX8MP_IOMUXC_I2C3_SCL__GPIO5_IO18 0x84 |
| MX8MP_IOMUXC_I2C3_SDA__GPIO5_IO19 0x84 |
| >; |
| }; |
| |
| pinctrl_i2c5: i2c5-grp { |
| fsl,pins = < |
| MX8MP_IOMUXC_HDMI_DDC_SCL__I2C5_SCL 0x40000084 |
| MX8MP_IOMUXC_HDMI_DDC_SDA__I2C5_SDA 0x40000084 |
| >; |
| }; |
| |
| pinctrl_i2c5_gpio: i2c5-gpio-grp { |
| fsl,pins = < |
| MX8MP_IOMUXC_HDMI_DDC_SCL__GPIO3_IO26 0x84 |
| MX8MP_IOMUXC_HDMI_DDC_SDA__GPIO3_IO27 0x84 |
| >; |
| }; |
| |
| pinctrl_panel_backlight: panel-backlight-grp { |
| fsl,pins = < |
| /* BL_ENABLE_1V8 */ |
| MX8MP_IOMUXC_NAND_ALE__GPIO3_IO00 0x104 |
| >; |
| }; |
| |
| pinctrl_panel_expansion: panel-expansion-grp { |
| fsl,pins = < |
| /* DSI_RESET_1V8# */ |
| MX8MP_IOMUXC_SAI1_RXFS__GPIO4_IO00 0x2 |
| /* DSI_IRQ_1V8# */ |
| MX8MP_IOMUXC_SAI1_TXD7__GPIO4_IO19 0x40000090 |
| >; |
| }; |
| |
| pinctrl_panel_pwm: panel-pwm-grp { |
| fsl,pins = < |
| /* BL_PWM_3V3 */ |
| MX8MP_IOMUXC_I2C4_SDA__PWM1_OUT 0x12 |
| >; |
| }; |
| |
| pinctrl_panel_vcc_reg: panel-vcc-grp { |
| fsl,pins = < |
| /* TFT_ENABLE_1V8 */ |
| MX8MP_IOMUXC_NAND_DATA00__GPIO3_IO06 0x104 |
| >; |
| }; |
| |
| pinctrl_pcie0: pcie-grp { |
| fsl,pins = < |
| /* M2_PCIE_RST# */ |
| MX8MP_IOMUXC_GPIO1_IO05__GPIO1_IO05 0x2 |
| /* M2_W_DISABLE1_1V8# */ |
| MX8MP_IOMUXC_SAI5_RXD2__GPIO3_IO23 0x2 |
| /* M2_W_DISABLE2_1V8# */ |
| MX8MP_IOMUXC_SAI5_RXD3__GPIO3_IO24 0x2 |
| /* CLK_M2_32K768 */ |
| MX8MP_IOMUXC_GPIO1_IO00__CCM_EXT_CLK1 0x14 |
| /* M2_PCIE_WAKE# */ |
| MX8MP_IOMUXC_GPIO1_IO06__GPIO1_IO06 0x40000140 |
| /* M2_PCIE_CLKREQ# */ |
| MX8MP_IOMUXC_I2C4_SCL__PCIE_CLKREQ_B 0x61 |
| >; |
| }; |
| |
| pinctrl_pdm: pdm-grp { |
| fsl,pins = < |
| /* PDM_SEL */ |
| MX8MP_IOMUXC_GPIO1_IO09__GPIO1_IO09 0x0 |
| MX8MP_IOMUXC_SAI3_RXC__AUDIOMIX_PDM_CLK 0x0 |
| MX8MP_IOMUXC_SAI3_RXFS__AUDIOMIX_PDM_BIT_STREAM00 0x0 |
| >; |
| }; |
| |
| pinctrl_pmic: pmic-grp { |
| fsl,pins = < |
| /* PMIC_nINT */ |
| MX8MP_IOMUXC_GPIO1_IO03__GPIO1_IO03 0x40000090 |
| >; |
| }; |
| |
| pinctrl_rtc: rtc-grp { |
| fsl,pins = < |
| /* RTC_IRQ# */ |
| MX8MP_IOMUXC_SD1_STROBE__GPIO2_IO11 0x40000090 |
| >; |
| }; |
| |
| pinctrl_sai1: sai1-grp { |
| fsl,pins = < |
| MX8MP_IOMUXC_SAI5_RXD1__AUDIOMIX_SAI1_TX_SYNC 0xd6 |
| MX8MP_IOMUXC_SAI5_RXFS__AUDIOMIX_SAI1_TX_DATA00 0xd6 |
| MX8MP_IOMUXC_SAI5_MCLK__AUDIOMIX_SAI1_TX_BCLK 0xd6 |
| MX8MP_IOMUXC_SAI1_MCLK__AUDIOMIX_SAI1_MCLK 0xd6 |
| MX8MP_IOMUXC_SAI1_RXD0__AUDIOMIX_SAI1_RX_DATA00 0xd6 |
| >; |
| }; |
| |
| pinctrl_sai2: sai2-grp { |
| fsl,pins = < |
| MX8MP_IOMUXC_SAI2_TXFS__AUDIOMIX_SAI2_TX_SYNC 0xd6 |
| MX8MP_IOMUXC_SAI2_TXD0__AUDIOMIX_SAI2_TX_DATA00 0xd6 |
| MX8MP_IOMUXC_SAI2_TXC__AUDIOMIX_SAI2_TX_BCLK 0xd6 |
| MX8MP_IOMUXC_SAI2_MCLK__AUDIOMIX_SAI2_MCLK 0xd6 |
| >; |
| }; |
| |
| pinctrl_sai3: sai3-grp { |
| fsl,pins = < |
| MX8MP_IOMUXC_SAI3_TXFS__AUDIOMIX_SAI3_TX_SYNC 0xd6 |
| MX8MP_IOMUXC_SAI3_TXD__AUDIOMIX_SAI3_TX_DATA00 0xd6 |
| MX8MP_IOMUXC_SAI3_TXC__AUDIOMIX_SAI3_TX_BCLK 0xd6 |
| MX8MP_IOMUXC_SAI3_MCLK__AUDIOMIX_SAI3_MCLK 0xd6 |
| MX8MP_IOMUXC_SAI3_RXD__AUDIOMIX_SAI3_RX_DATA00 0xd6 |
| >; |
| }; |
| |
| pinctrl_uart1: uart1-grp { |
| fsl,pins = < |
| MX8MP_IOMUXC_SD1_CLK__UART1_DCE_TX 0x49 |
| MX8MP_IOMUXC_SD1_CMD__UART1_DCE_RX 0x49 |
| MX8MP_IOMUXC_SD1_DATA1__UART1_DCE_CTS 0x49 |
| MX8MP_IOMUXC_SAI2_RXD0__UART1_DCE_RTS 0x49 |
| >; |
| }; |
| |
| pinctrl_uart2: uart2-grp { |
| fsl,pins = < |
| MX8MP_IOMUXC_SD1_DATA2__UART2_DCE_TX 0x49 |
| MX8MP_IOMUXC_SD1_DATA3__UART2_DCE_RX 0x49 |
| MX8MP_IOMUXC_SD1_DATA4__UART2_DCE_RTS 0x49 |
| MX8MP_IOMUXC_SD1_DATA5__UART2_DCE_CTS 0x49 |
| >; |
| }; |
| |
| pinctrl_uart3: uart3-grp { |
| fsl,pins = < |
| MX8MP_IOMUXC_UART3_RXD__UART3_DCE_RX 0x49 |
| MX8MP_IOMUXC_UART3_TXD__UART3_DCE_TX 0x49 |
| >; |
| }; |
| |
| pinctrl_uart4: uart4-grp { |
| fsl,pins = < |
| MX8MP_IOMUXC_UART4_RXD__UART4_DCE_RX 0x49 |
| MX8MP_IOMUXC_UART4_TXD__UART4_DCE_TX 0x49 |
| >; |
| }; |
| |
| pinctrl_usdhc2: usdhc2-grp { |
| fsl,pins = < |
| MX8MP_IOMUXC_SD2_CLK__USDHC2_CLK 0x190 |
| MX8MP_IOMUXC_SD2_CMD__USDHC2_CMD 0x1d0 |
| MX8MP_IOMUXC_SD2_DATA0__USDHC2_DATA0 0x1d0 |
| MX8MP_IOMUXC_SD2_DATA1__USDHC2_DATA1 0x1d0 |
| MX8MP_IOMUXC_SD2_DATA2__USDHC2_DATA2 0x1d0 |
| MX8MP_IOMUXC_SD2_DATA3__USDHC2_DATA3 0x1d0 |
| MX8MP_IOMUXC_GPIO1_IO04__USDHC2_VSELECT 0xc1 |
| >; |
| }; |
| |
| pinctrl_usdhc2_100mhz: usdhc2-100mhz-grp { |
| fsl,pins = < |
| MX8MP_IOMUXC_SD2_CLK__USDHC2_CLK 0x194 |
| MX8MP_IOMUXC_SD2_CMD__USDHC2_CMD 0x1d4 |
| MX8MP_IOMUXC_SD2_DATA0__USDHC2_DATA0 0x1d4 |
| MX8MP_IOMUXC_SD2_DATA1__USDHC2_DATA1 0x1d4 |
| MX8MP_IOMUXC_SD2_DATA2__USDHC2_DATA2 0x1d4 |
| MX8MP_IOMUXC_SD2_DATA3__USDHC2_DATA3 0x1d4 |
| MX8MP_IOMUXC_GPIO1_IO04__USDHC2_VSELECT 0xc1 |
| >; |
| }; |
| |
| pinctrl_usdhc2_200mhz: usdhc2-200mhz-grp { |
| fsl,pins = < |
| MX8MP_IOMUXC_SD2_CLK__USDHC2_CLK 0x196 |
| MX8MP_IOMUXC_SD2_CMD__USDHC2_CMD 0x1d6 |
| MX8MP_IOMUXC_SD2_DATA0__USDHC2_DATA0 0x1d6 |
| MX8MP_IOMUXC_SD2_DATA1__USDHC2_DATA1 0x1d6 |
| MX8MP_IOMUXC_SD2_DATA2__USDHC2_DATA2 0x1d6 |
| MX8MP_IOMUXC_SD2_DATA3__USDHC2_DATA3 0x1d6 |
| MX8MP_IOMUXC_GPIO1_IO04__USDHC2_VSELECT 0xc1 |
| >; |
| }; |
| |
| pinctrl_usdhc2_vmmc: usdhc2-vmmc-grp { |
| fsl,pins = < |
| MX8MP_IOMUXC_SD2_RESET_B__GPIO2_IO19 0x20 |
| >; |
| }; |
| |
| pinctrl_usdhc2_gpio: usdhc2-gpio-grp { |
| fsl,pins = < |
| MX8MP_IOMUXC_SD2_CD_B__GPIO2_IO12 0x40000080 |
| >; |
| }; |
| |
| pinctrl_usdhc3: usdhc3-grp { |
| fsl,pins = < |
| MX8MP_IOMUXC_NAND_WE_B__USDHC3_CLK 0x190 |
| MX8MP_IOMUXC_NAND_WP_B__USDHC3_CMD 0x1d0 |
| MX8MP_IOMUXC_NAND_DATA04__USDHC3_DATA0 0x1d0 |
| MX8MP_IOMUXC_NAND_DATA05__USDHC3_DATA1 0x1d0 |
| MX8MP_IOMUXC_NAND_DATA06__USDHC3_DATA2 0x1d0 |
| MX8MP_IOMUXC_NAND_DATA07__USDHC3_DATA3 0x1d0 |
| MX8MP_IOMUXC_NAND_RE_B__USDHC3_DATA4 0x1d0 |
| MX8MP_IOMUXC_NAND_CE2_B__USDHC3_DATA5 0x1d0 |
| MX8MP_IOMUXC_NAND_CE3_B__USDHC3_DATA6 0x1d0 |
| MX8MP_IOMUXC_NAND_CLE__USDHC3_DATA7 0x1d0 |
| MX8MP_IOMUXC_NAND_CE1_B__USDHC3_STROBE 0x190 |
| MX8MP_IOMUXC_NAND_READY_B__USDHC3_RESET_B 0x141 |
| >; |
| }; |
| |
| pinctrl_usdhc3_100mhz: usdhc3-100mhz-grp { |
| fsl,pins = < |
| MX8MP_IOMUXC_NAND_WE_B__USDHC3_CLK 0x194 |
| MX8MP_IOMUXC_NAND_WP_B__USDHC3_CMD 0x1d4 |
| MX8MP_IOMUXC_NAND_DATA04__USDHC3_DATA0 0x1d4 |
| MX8MP_IOMUXC_NAND_DATA05__USDHC3_DATA1 0x1d4 |
| MX8MP_IOMUXC_NAND_DATA06__USDHC3_DATA2 0x1d4 |
| MX8MP_IOMUXC_NAND_DATA07__USDHC3_DATA3 0x1d4 |
| MX8MP_IOMUXC_NAND_RE_B__USDHC3_DATA4 0x1d4 |
| MX8MP_IOMUXC_NAND_CE2_B__USDHC3_DATA5 0x1d4 |
| MX8MP_IOMUXC_NAND_CE3_B__USDHC3_DATA6 0x1d4 |
| MX8MP_IOMUXC_NAND_CLE__USDHC3_DATA7 0x1d4 |
| MX8MP_IOMUXC_NAND_CE1_B__USDHC3_STROBE 0x194 |
| MX8MP_IOMUXC_NAND_READY_B__USDHC3_RESET_B 0x141 |
| >; |
| }; |
| |
| pinctrl_usdhc3_200mhz: usdhc3-200mhz-grp { |
| fsl,pins = < |
| MX8MP_IOMUXC_NAND_WE_B__USDHC3_CLK 0x196 |
| MX8MP_IOMUXC_NAND_WP_B__USDHC3_CMD 0x1d6 |
| MX8MP_IOMUXC_NAND_DATA04__USDHC3_DATA0 0x1d6 |
| MX8MP_IOMUXC_NAND_DATA05__USDHC3_DATA1 0x1d6 |
| MX8MP_IOMUXC_NAND_DATA06__USDHC3_DATA2 0x1d6 |
| MX8MP_IOMUXC_NAND_DATA07__USDHC3_DATA3 0x1d6 |
| MX8MP_IOMUXC_NAND_RE_B__USDHC3_DATA4 0x1d6 |
| MX8MP_IOMUXC_NAND_CE2_B__USDHC3_DATA5 0x1d6 |
| MX8MP_IOMUXC_NAND_CE3_B__USDHC3_DATA6 0x1d6 |
| MX8MP_IOMUXC_NAND_CLE__USDHC3_DATA7 0x1d6 |
| MX8MP_IOMUXC_NAND_CE1_B__USDHC3_STROBE 0x196 |
| MX8MP_IOMUXC_NAND_READY_B__USDHC3_RESET_B 0x141 |
| >; |
| }; |
| |
| pinctrl_usb_hub: usb-hub-grp { |
| fsl,pins = < |
| /* USBHUB_RESET# */ |
| MX8MP_IOMUXC_GPIO1_IO01__GPIO1_IO01 0x4 |
| >; |
| }; |
| |
| pinctrl_usb1: usb1-grp { |
| fsl,pins = < |
| MX8MP_IOMUXC_GPIO1_IO12__USB1_OTG_PWR 0x6 |
| MX8MP_IOMUXC_GPIO1_IO13__USB1_OTG_OC 0x80 |
| >; |
| }; |
| |
| pinctrl_watchdog_gpio: watchdog-gpio-grp { |
| fsl,pins = < |
| /* WDOG_B# */ |
| MX8MP_IOMUXC_GPIO1_IO02__WDOG1_WDOG_B 0x26 |
| /* WDOG_EN -- ungate WDT RESET# signal propagation */ |
| MX8MP_IOMUXC_SPDIF_EXT_CLK__GPIO5_IO05 0x6 |
| /* WDOG_KICK# / WDI */ |
| MX8MP_IOMUXC_SD1_DATA6__GPIO2_IO08 0x26 |
| >; |
| }; |
| }; |
