| // SPDX-License-Identifier: GPL-2.0+ |
| /* |
| * Copyright 2018-2020 Purism SPC |
| */ |
| |
| /dts-v1/; |
| |
| #include "dt-bindings/input/input.h" |
| #include <dt-bindings/interrupt-controller/irq.h> |
| #include <dt-bindings/leds/common.h> |
| #include "dt-bindings/pwm/pwm.h" |
| #include "dt-bindings/usb/pd.h" |
| #include "imx8mq.dtsi" |
| |
| / { |
| model = "Purism Librem 5"; |
| compatible = "purism,librem5", "fsl,imx8mq"; |
| chassis-type = "handset"; |
| |
| backlight_dsi: backlight-dsi { |
| compatible = "led-backlight"; |
| leds = <&led_backlight>; |
| brightness-levels = <255>; |
| default-brightness-level = <190>; |
| }; |
| |
| pmic_osc: clock-pmic { |
| compatible = "fixed-clock"; |
| #clock-cells = <0>; |
| clock-frequency = <32768>; |
| clock-output-names = "pmic_osc"; |
| }; |
| |
| chosen { |
| stdout-path = &uart1; |
| }; |
| |
| gpio-keys { |
| compatible = "gpio-keys"; |
| pinctrl-names = "default"; |
| pinctrl-0 = <&pinctrl_keys>; |
| |
| key-vol-down { |
| label = "VOL_DOWN"; |
| gpios = <&gpio1 17 GPIO_ACTIVE_LOW>; |
| linux,code = <KEY_VOLUMEDOWN>; |
| debounce-interval = <50>; |
| wakeup-source; |
| }; |
| |
| key-vol-up { |
| label = "VOL_UP"; |
| gpios = <&gpio1 16 GPIO_ACTIVE_LOW>; |
| linux,code = <KEY_VOLUMEUP>; |
| debounce-interval = <50>; |
| wakeup-source; |
| }; |
| }; |
| |
| led-controller { |
| compatible = "pwm-leds-multicolor"; |
| |
| multi-led { |
| color = <LED_COLOR_ID_RGB>; |
| function = LED_FUNCTION_STATUS; |
| max-brightness = <248>; |
| |
| led-0 { |
| color = <LED_COLOR_ID_BLUE>; |
| pwms = <&pwm2 0 50000 0>; |
| }; |
| |
| led-1 { |
| color = <LED_COLOR_ID_GREEN>; |
| pwms = <&pwm4 0 50000 0>; |
| }; |
| |
| led-2 { |
| color = <LED_COLOR_ID_RED>; |
| pwms = <&pwm3 0 50000 0>; |
| }; |
| }; |
| }; |
| |
| reg_aud_1v8: regulator-audio-1v8 { |
| compatible = "regulator-fixed"; |
| pinctrl-names = "default"; |
| pinctrl-0 = <&pinctrl_audiopwr>; |
| regulator-name = "AUD_1V8"; |
| regulator-min-microvolt = <1800000>; |
| regulator-max-microvolt = <1800000>; |
| gpio = <&gpio1 4 GPIO_ACTIVE_HIGH>; |
| enable-active-high; |
| regulator-always-on; |
| }; |
| |
| reg_mic_2v4: regulator-mic-2v4 { |
| compatible = "regulator-fixed"; |
| regulator-name = "MIC_2V4"; |
| regulator-min-microvolt = <2400000>; |
| regulator-max-microvolt = <2400000>; |
| vin-supply = <®_aud_1v8>; |
| }; |
| |
| /* |
| * the pinctrl for reg_csi_1v8 and reg_vcam_1v8 is added to the PMIC |
| * since we can't have it twice in the 2 different regulator nodes. |
| */ |
| reg_csi_1v8: regulator-csi-1v8 { |
| compatible = "regulator-fixed"; |
| regulator-name = "CAMERA_VDDIO_1V8"; |
| regulator-min-microvolt = <1800000>; |
| regulator-max-microvolt = <1800000>; |
| vin-supply = <®_vdd_3v3>; |
| gpio = <&gpio1 0 GPIO_ACTIVE_HIGH>; |
| enable-active-high; |
| }; |
| |
| /* controlled by the CAMERA_POWER_KEY HKS */ |
| reg_vcam_1v2: regulator-vcam-1v2 { |
| compatible = "regulator-fixed"; |
| regulator-name = "CAMERA_VDDD_1V2"; |
| regulator-min-microvolt = <1200000>; |
| regulator-max-microvolt = <1200000>; |
| vin-supply = <®_vdd_1v8>; |
| enable-active-high; |
| }; |
| |
| reg_vcam_2v8: regulator-vcam-2v8 { |
| compatible = "regulator-fixed"; |
| regulator-name = "CAMERA_VDDA_2V8"; |
| regulator-min-microvolt = <2800000>; |
| regulator-max-microvolt = <2800000>; |
| vin-supply = <®_vdd_3v3>; |
| gpio = <&gpio1 0 GPIO_ACTIVE_HIGH>; |
| enable-active-high; |
| }; |
| |
| reg_gnss: regulator-gnss { |
| compatible = "regulator-fixed"; |
| pinctrl-names = "default"; |
| pinctrl-0 = <&pinctrl_gnsspwr>; |
| regulator-name = "GNSS"; |
| regulator-min-microvolt = <3300000>; |
| regulator-max-microvolt = <3300000>; |
| gpio = <&gpio3 12 GPIO_ACTIVE_HIGH>; |
| enable-active-high; |
| }; |
| |
| reg_hub: regulator-hub { |
| compatible = "regulator-fixed"; |
| pinctrl-names = "default"; |
| pinctrl-0 = <&pinctrl_hub_pwr>; |
| regulator-name = "HUB"; |
| regulator-min-microvolt = <3300000>; |
| regulator-max-microvolt = <3300000>; |
| gpio = <&gpio1 14 GPIO_ACTIVE_HIGH>; |
| enable-active-high; |
| }; |
| |
| reg_lcd_1v8: regulator-lcd-1v8 { |
| compatible = "regulator-fixed"; |
| pinctrl-names = "default"; |
| pinctrl-0 = <&pinctrl_dsien>; |
| regulator-name = "LCD_1V8"; |
| regulator-min-microvolt = <1800000>; |
| regulator-max-microvolt = <1800000>; |
| vin-supply = <®_vdd_1v8>; |
| gpio = <&gpio1 5 GPIO_ACTIVE_HIGH>; |
| enable-active-high; |
| /* Otherwise i2c3 is not functional */ |
| regulator-always-on; |
| }; |
| |
| reg_lcd_3v4: regulator-lcd-3v4 { |
| compatible = "regulator-fixed"; |
| regulator-name = "LCD_3V4"; |
| pinctrl-names = "default"; |
| pinctrl-0 = <&pinctrl_dsibiasen>; |
| vin-supply = <®_vsys_3v4>; |
| gpio = <&gpio1 20 GPIO_ACTIVE_HIGH>; |
| enable-active-high; |
| }; |
| |
| reg_vdd_sen: regulator-vdd-sen { |
| compatible = "regulator-fixed"; |
| regulator-name = "VDD_SEN"; |
| regulator-min-microvolt = <3300000>; |
| regulator-max-microvolt = <3300000>; |
| }; |
| |
| reg_vdd_1v8: regulator-vdd-1v8 { |
| compatible = "regulator-fixed"; |
| regulator-name = "VDD_1V8"; |
| regulator-min-microvolt = <1800000>; |
| regulator-max-microvolt = <1800000>; |
| vin-supply = <&buck7_reg>; |
| }; |
| |
| reg_vdd_3v3: regulator-vdd-3v3 { |
| compatible = "regulator-fixed"; |
| regulator-name = "VDD_3V3"; |
| regulator-min-microvolt = <3300000>; |
| regulator-max-microvolt = <3300000>; |
| }; |
| |
| reg_vsys_3v4: regulator-vsys-3v4 { |
| compatible = "regulator-fixed"; |
| regulator-name = "VSYS_3V4"; |
| regulator-min-microvolt = <3400000>; |
| regulator-max-microvolt = <3400000>; |
| regulator-always-on; |
| }; |
| |
| reg_wifi_3v3: regulator-wifi-3v3 { |
| compatible = "regulator-fixed"; |
| pinctrl-names = "default"; |
| pinctrl-0 = <&pinctrl_wifi_pwr>; |
| regulator-name = "3V3_WIFI"; |
| regulator-min-microvolt = <3300000>; |
| regulator-max-microvolt = <3300000>; |
| gpio = <&gpio3 10 GPIO_ACTIVE_HIGH>; |
| enable-active-high; |
| vin-supply = <®_vdd_3v3>; |
| }; |
| |
| sound { |
| compatible = "simple-audio-card"; |
| pinctrl-names = "default"; |
| pinctrl-0 = <&pinctrl_hp>; |
| simple-audio-card,name = "Librem 5"; |
| simple-audio-card,format = "i2s"; |
| simple-audio-card,widgets = |
| "Headphone", "Headphones", |
| "Microphone", "Headset Mic", |
| "Microphone", "Digital Mic", |
| "Speaker", "Speaker"; |
| simple-audio-card,routing = |
| "Headphones", "HPOUTL", |
| "Headphones", "HPOUTR", |
| "Speaker", "SPKOUTL", |
| "Speaker", "SPKOUTR", |
| "Headset Mic", "MICBIAS", |
| "IN3R", "Headset Mic", |
| "DMICDAT", "Digital Mic"; |
| simple-audio-card,hp-det-gpio = <&gpio3 9 GPIO_ACTIVE_HIGH>; |
| |
| simple-audio-card,cpu { |
| sound-dai = <&sai2>; |
| }; |
| |
| simple-audio-card,codec { |
| sound-dai = <&codec>; |
| clocks = <&clk IMX8MQ_CLK_SAI2_ROOT>; |
| frame-master; |
| bitclock-master; |
| }; |
| }; |
| |
| sound-wwan { |
| compatible = "simple-audio-card"; |
| simple-audio-card,name = "Modem"; |
| simple-audio-card,format = "i2s"; |
| |
| simple-audio-card,cpu { |
| sound-dai = <&sai6>; |
| frame-inversion; |
| }; |
| |
| simple-audio-card,codec { |
| sound-dai = <&bm818_codec>; |
| frame-master; |
| bitclock-master; |
| }; |
| }; |
| |
| usdhc2_pwrseq: pwrseq { |
| pinctrl-names = "default"; |
| pinctrl-0 = <&pinctrl_bt>, <&pinctrl_wifi_disable>; |
| compatible = "mmc-pwrseq-simple"; |
| reset-gpios = <&gpio3 25 GPIO_ACTIVE_HIGH>, |
| <&gpio4 29 GPIO_ACTIVE_HIGH>; |
| }; |
| |
| bm818_codec: sound-wwan-codec { |
| compatible = "broadmobi,bm818", "option,gtm601"; |
| #sound-dai-cells = <0>; |
| }; |
| |
| vibrator { |
| compatible = "pwm-vibrator"; |
| pwms = <&pwm1 0 1000000000 0>; |
| pwm-names = "enable"; |
| vcc-supply = <®_vdd_3v3>; |
| }; |
| }; |
| |
| &A53_0 { |
| cpu-supply = <&buck2_reg>; |
| }; |
| |
| &A53_1 { |
| cpu-supply = <&buck2_reg>; |
| }; |
| |
| &A53_2 { |
| cpu-supply = <&buck2_reg>; |
| }; |
| |
| &A53_3 { |
| cpu-supply = <&buck2_reg>; |
| }; |
| |
| &csi1 { |
| status = "okay"; |
| }; |
| |
| &ddrc { |
| operating-points-v2 = <&ddrc_opp_table>; |
| status = "okay"; |
| |
| ddrc_opp_table: opp-table { |
| compatible = "operating-points-v2"; |
| |
| opp-25000000 { |
| opp-hz = /bits/ 64 <25000000>; |
| }; |
| |
| opp-100000000 { |
| opp-hz = /bits/ 64 <100000000>; |
| }; |
| |
| opp-166000000 { |
| opp-hz = /bits/ 64 <166935483>; |
| }; |
| |
| opp-800000000 { |
| opp-hz = /bits/ 64 <800000000>; |
| }; |
| }; |
| }; |
| |
| &dphy { |
| status = "okay"; |
| }; |
| |
| &ecspi1 { |
| pinctrl-names = "default"; |
| pinctrl-0 = <&pinctrl_ecspi1>; |
| cs-gpios = <&gpio5 9 GPIO_ACTIVE_LOW>; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| status = "okay"; |
| |
| nor_flash: flash@0 { |
| compatible = "jedec,spi-nor"; |
| reg = <0>; |
| spi-max-frequency = <1000000>; |
| #address-cells = <1>; |
| #size-cells = <1>; |
| |
| partition@0 { |
| label = "protected0"; |
| reg = <0x0 0x30000>; |
| read-only; |
| }; |
| |
| partition@30000 { |
| label = "firmware"; |
| reg = <0x30000 0x1d0000>; |
| read-only; |
| }; |
| }; |
| }; |
| |
| &gpio1 { |
| pinctrl-names = "default"; |
| pinctrl-0 = <&pinctrl_pmic_5v>; |
| |
| pmic-5v-hog { |
| gpio-hog; |
| gpios = <1 GPIO_ACTIVE_HIGH>; |
| input; |
| lane-mapping = "pmic-5v"; |
| }; |
| }; |
| |
| &iomuxc { |
| pinctrl-names = "default"; |
| pinctrl-0 = <&pinctrl_hog>; |
| |
| pinctrl_hog: hoggrp { |
| fsl,pins = < |
| /* CLKO2 for cameras on both CSI1 and CSI2 */ |
| MX8MQ_IOMUXC_GPIO1_IO15_CCMSRCGPCMIX_CLKO2 0x1f |
| >; |
| }; |
| |
| pinctrl_audiopwr: audiopwrgrp { |
| fsl,pins = < |
| /* AUDIO_POWER_EN_3V3 */ |
| MX8MQ_IOMUXC_GPIO1_IO04_GPIO1_IO4 0x83 |
| >; |
| }; |
| |
| pinctrl_bl: blgrp { |
| fsl,pins = < |
| /* BACKLINGE_EN */ |
| MX8MQ_IOMUXC_NAND_DQS_GPIO3_IO14 0x83 |
| >; |
| }; |
| |
| pinctrl_bt: btgrp { |
| fsl,pins = < |
| /* BT_REG_ON */ |
| MX8MQ_IOMUXC_SAI5_MCLK_GPIO3_IO25 0x83 |
| >; |
| }; |
| |
| pinctrl_camera_pwr: camerapwrgrp { |
| fsl,pins = < |
| /* CAMERA_PWR_EN_3V3 */ |
| MX8MQ_IOMUXC_GPIO1_IO00_GPIO1_IO0 0x83 |
| >; |
| }; |
| |
| pinctrl_csi1: csi1grp { |
| fsl,pins = < |
| /* CSI1_NRST */ |
| MX8MQ_IOMUXC_ENET_RXC_GPIO1_IO25 0x83 |
| >; |
| }; |
| |
| pinctrl_charger_in: chargeringrp { |
| fsl,pins = < |
| /* CHRG_INT */ |
| MX8MQ_IOMUXC_NAND_CE2_B_GPIO3_IO3 0x80 |
| >; |
| }; |
| |
| pinctrl_dsibiasen: dsibiasengrp { |
| fsl,pins = < |
| /* DSI_BIAS_EN */ |
| MX8MQ_IOMUXC_ENET_TD1_GPIO1_IO20 0x83 |
| >; |
| }; |
| |
| pinctrl_dsien: dsiengrp { |
| fsl,pins = < |
| /* DSI_EN_3V3 */ |
| MX8MQ_IOMUXC_GPIO1_IO05_GPIO1_IO5 0x83 |
| >; |
| }; |
| |
| pinctrl_dsirst: dsirstgrp { |
| fsl,pins = < |
| /* DSI_RST */ |
| MX8MQ_IOMUXC_ENET_RD3_GPIO1_IO29 0x83 |
| /* DSI_TE */ |
| MX8MQ_IOMUXC_ENET_RD2_GPIO1_IO28 0x83 |
| /* TP_RST */ |
| MX8MQ_IOMUXC_ENET_RX_CTL_GPIO1_IO24 0x83 |
| >; |
| }; |
| |
| pinctrl_ecspi1: ecspigrp { |
| fsl,pins = < |
| MX8MQ_IOMUXC_ECSPI1_MOSI_ECSPI1_MOSI 0x83 |
| MX8MQ_IOMUXC_ECSPI1_MISO_ECSPI1_MISO 0x83 |
| MX8MQ_IOMUXC_ECSPI1_SS0_GPIO5_IO9 0x19 |
| MX8MQ_IOMUXC_ECSPI1_SCLK_ECSPI1_SCLK 0x83 |
| >; |
| }; |
| |
| pinctrl_gauge: gaugegrp { |
| fsl,pins = < |
| /* BAT_LOW */ |
| MX8MQ_IOMUXC_SAI5_RXC_GPIO3_IO20 0x80 |
| >; |
| }; |
| |
| pinctrl_gnsspwr: gnsspwrgrp { |
| fsl,pins = < |
| /* GPS3V3_EN */ |
| MX8MQ_IOMUXC_NAND_DATA06_GPIO3_IO12 0x83 |
| >; |
| }; |
| |
| pinctrl_haptic: hapticgrp { |
| fsl,pins = < |
| /* MOTO */ |
| MX8MQ_IOMUXC_SPDIF_EXT_CLK_PWM1_OUT 0x83 |
| >; |
| }; |
| |
| pinctrl_hp: hpgrp { |
| fsl,pins = < |
| /* HEADPHONE_DET_1V8 */ |
| MX8MQ_IOMUXC_NAND_DATA03_GPIO3_IO9 0x180 |
| >; |
| }; |
| |
| pinctrl_hub_pwr: hubpwrgrp { |
| fsl,pins = < |
| /* HUB_PWR_3V3_EN */ |
| MX8MQ_IOMUXC_GPIO1_IO14_GPIO1_IO14 0x83 |
| >; |
| }; |
| |
| pinctrl_i2c1: i2c1grp { |
| fsl,pins = < |
| MX8MQ_IOMUXC_I2C1_SCL_I2C1_SCL 0x40000026 |
| MX8MQ_IOMUXC_I2C1_SDA_I2C1_SDA 0x40000026 |
| >; |
| }; |
| |
| pinctrl_i2c2: i2c2grp { |
| fsl,pins = < |
| MX8MQ_IOMUXC_I2C2_SCL_I2C2_SCL 0x40000026 |
| MX8MQ_IOMUXC_I2C2_SDA_I2C2_SDA 0x40000026 |
| >; |
| }; |
| |
| pinctrl_i2c3: i2c3grp { |
| fsl,pins = < |
| MX8MQ_IOMUXC_I2C3_SCL_I2C3_SCL 0x40000026 |
| MX8MQ_IOMUXC_I2C3_SDA_I2C3_SDA 0x40000026 |
| >; |
| }; |
| |
| pinctrl_i2c4: i2c4grp { |
| fsl,pins = < |
| MX8MQ_IOMUXC_I2C4_SCL_I2C4_SCL 0x40000026 |
| MX8MQ_IOMUXC_I2C4_SDA_I2C4_SDA 0x40000026 |
| >; |
| }; |
| |
| pinctrl_keys: keysgrp { |
| fsl,pins = < |
| /* VOL- */ |
| MX8MQ_IOMUXC_ENET_MDIO_GPIO1_IO17 0x01C0 |
| /* VOL+ */ |
| MX8MQ_IOMUXC_ENET_MDC_GPIO1_IO16 0x01C0 |
| >; |
| }; |
| |
| pinctrl_led_b: ledbgrp { |
| fsl,pins = < |
| /* LED_B */ |
| MX8MQ_IOMUXC_GPIO1_IO13_PWM2_OUT 0x06 |
| >; |
| }; |
| |
| pinctrl_led_g: ledggrp { |
| fsl,pins = < |
| /* LED_G */ |
| MX8MQ_IOMUXC_SAI3_MCLK_PWM4_OUT 0x06 |
| >; |
| }; |
| |
| pinctrl_led_r: ledrgrp { |
| fsl,pins = < |
| /* LED_R */ |
| MX8MQ_IOMUXC_SPDIF_TX_PWM3_OUT 0x06 |
| >; |
| }; |
| |
| pinctrl_mag: maggrp { |
| fsl,pins = < |
| /* INT_MAG */ |
| MX8MQ_IOMUXC_SAI5_RXD1_GPIO3_IO22 0x80 |
| >; |
| }; |
| |
| pinctrl_pmic: pmicgrp { |
| fsl,pins = < |
| /* PMIC_NINT */ |
| MX8MQ_IOMUXC_GPIO1_IO07_GPIO1_IO7 0x80 |
| >; |
| }; |
| |
| pinctrl_pmic_5v: pmic5vgrp { |
| fsl,pins = < |
| /* PMIC_5V */ |
| MX8MQ_IOMUXC_GPIO1_IO01_GPIO1_IO1 0x80 |
| >; |
| }; |
| |
| pinctrl_prox: proxgrp { |
| fsl,pins = < |
| /* INT_LIGHT */ |
| MX8MQ_IOMUXC_NAND_DATA01_GPIO3_IO7 0x80 |
| >; |
| }; |
| |
| pinctrl_rtc: rtcgrp { |
| fsl,pins = < |
| /* RTC_INT */ |
| MX8MQ_IOMUXC_GPIO1_IO09_GPIO1_IO9 0x80 |
| >; |
| }; |
| |
| pinctrl_sai2: sai2grp { |
| fsl,pins = < |
| MX8MQ_IOMUXC_SAI2_TXD0_SAI2_TX_DATA0 0xd6 |
| MX8MQ_IOMUXC_SAI2_TXFS_SAI2_TX_SYNC 0xd6 |
| MX8MQ_IOMUXC_SAI2_MCLK_SAI2_MCLK 0xd6 |
| MX8MQ_IOMUXC_SAI2_RXD0_SAI2_RX_DATA0 0xd6 |
| MX8MQ_IOMUXC_SAI2_TXC_SAI2_TX_BCLK 0xd6 |
| >; |
| }; |
| |
| pinctrl_sai6: sai6grp { |
| fsl,pins = < |
| MX8MQ_IOMUXC_SAI1_RXD5_SAI6_RX_DATA0 0xd6 |
| MX8MQ_IOMUXC_SAI1_RXD6_SAI6_RX_SYNC 0xd6 |
| MX8MQ_IOMUXC_SAI1_TXD4_SAI6_RX_BCLK 0xd6 |
| MX8MQ_IOMUXC_SAI1_TXD5_SAI6_TX_DATA0 0xd6 |
| >; |
| }; |
| |
| pinctrl_tcpc: tcpcgrp { |
| fsl,pins = < |
| /* TCPC_INT */ |
| MX8MQ_IOMUXC_GPIO1_IO10_GPIO1_IO10 0x01C0 |
| >; |
| }; |
| |
| pinctrl_touch: touchgrp { |
| fsl,pins = < |
| /* TP_INT */ |
| MX8MQ_IOMUXC_ENET_RD1_GPIO1_IO27 0x80 |
| >; |
| }; |
| |
| pinctrl_typec: typecgrp { |
| fsl,pins = < |
| /* TYPEC_MUX_EN */ |
| MX8MQ_IOMUXC_GPIO1_IO11_GPIO1_IO11 0x83 |
| >; |
| }; |
| |
| pinctrl_uart1: uart1grp { |
| fsl,pins = < |
| MX8MQ_IOMUXC_UART1_RXD_UART1_DCE_RX 0x49 |
| MX8MQ_IOMUXC_UART1_TXD_UART1_DCE_TX 0x49 |
| >; |
| }; |
| |
| pinctrl_uart2: uart2grp { |
| fsl,pins = < |
| MX8MQ_IOMUXC_UART2_TXD_UART2_DCE_TX 0x49 |
| MX8MQ_IOMUXC_UART2_RXD_UART2_DCE_RX 0x49 |
| >; |
| }; |
| |
| pinctrl_uart3: uart3grp { |
| fsl,pins = < |
| MX8MQ_IOMUXC_UART3_RXD_UART3_DCE_RX 0x49 |
| MX8MQ_IOMUXC_UART3_TXD_UART3_DCE_TX 0x49 |
| >; |
| }; |
| |
| pinctrl_uart4: uart4grp { |
| fsl,pins = < |
| MX8MQ_IOMUXC_ECSPI2_SCLK_UART4_DCE_RX 0x49 |
| MX8MQ_IOMUXC_ECSPI2_MOSI_UART4_DCE_TX 0x49 |
| MX8MQ_IOMUXC_ECSPI2_MISO_UART4_DCE_CTS_B 0x49 |
| MX8MQ_IOMUXC_ECSPI2_SS0_UART4_DCE_RTS_B 0x49 |
| >; |
| }; |
| |
| pinctrl_usdhc1: usdhc1grp { |
| fsl,pins = < |
| MX8MQ_IOMUXC_SD1_CLK_USDHC1_CLK 0x83 |
| MX8MQ_IOMUXC_SD1_CMD_USDHC1_CMD 0xc3 |
| MX8MQ_IOMUXC_SD1_DATA0_USDHC1_DATA0 0xc3 |
| MX8MQ_IOMUXC_SD1_DATA1_USDHC1_DATA1 0xc3 |
| MX8MQ_IOMUXC_SD1_DATA2_USDHC1_DATA2 0xc3 |
| MX8MQ_IOMUXC_SD1_DATA3_USDHC1_DATA3 0xc3 |
| MX8MQ_IOMUXC_SD1_DATA4_USDHC1_DATA4 0xc3 |
| MX8MQ_IOMUXC_SD1_DATA5_USDHC1_DATA5 0xc3 |
| MX8MQ_IOMUXC_SD1_DATA6_USDHC1_DATA6 0xc3 |
| MX8MQ_IOMUXC_SD1_DATA7_USDHC1_DATA7 0xc3 |
| MX8MQ_IOMUXC_SD1_STROBE_USDHC1_STROBE 0x83 |
| MX8MQ_IOMUXC_SD1_RESET_B_USDHC1_RESET_B 0xc1 |
| >; |
| }; |
| |
| pinctrl_usdhc1_100mhz: usdhc1-100mhzgrp { |
| fsl,pins = < |
| MX8MQ_IOMUXC_SD1_CLK_USDHC1_CLK 0x8d |
| MX8MQ_IOMUXC_SD1_CMD_USDHC1_CMD 0xcd |
| MX8MQ_IOMUXC_SD1_DATA0_USDHC1_DATA0 0xcd |
| MX8MQ_IOMUXC_SD1_DATA1_USDHC1_DATA1 0xcd |
| MX8MQ_IOMUXC_SD1_DATA2_USDHC1_DATA2 0xcd |
| MX8MQ_IOMUXC_SD1_DATA3_USDHC1_DATA3 0xcd |
| MX8MQ_IOMUXC_SD1_DATA4_USDHC1_DATA4 0xcd |
| MX8MQ_IOMUXC_SD1_DATA5_USDHC1_DATA5 0xcd |
| MX8MQ_IOMUXC_SD1_DATA6_USDHC1_DATA6 0xcd |
| MX8MQ_IOMUXC_SD1_DATA7_USDHC1_DATA7 0xcd |
| MX8MQ_IOMUXC_SD1_STROBE_USDHC1_STROBE 0x8d |
| MX8MQ_IOMUXC_SD1_RESET_B_USDHC1_RESET_B 0xc1 |
| >; |
| }; |
| |
| pinctrl_usdhc1_200mhz: usdhc1-200mhzgrp { |
| fsl,pins = < |
| MX8MQ_IOMUXC_SD1_CLK_USDHC1_CLK 0x9f |
| MX8MQ_IOMUXC_SD1_CMD_USDHC1_CMD 0xdf |
| MX8MQ_IOMUXC_SD1_DATA0_USDHC1_DATA0 0xdf |
| MX8MQ_IOMUXC_SD1_DATA1_USDHC1_DATA1 0xdf |
| MX8MQ_IOMUXC_SD1_DATA2_USDHC1_DATA2 0xdf |
| MX8MQ_IOMUXC_SD1_DATA3_USDHC1_DATA3 0xdf |
| MX8MQ_IOMUXC_SD1_DATA4_USDHC1_DATA4 0xdf |
| MX8MQ_IOMUXC_SD1_DATA5_USDHC1_DATA5 0xdf |
| MX8MQ_IOMUXC_SD1_DATA6_USDHC1_DATA6 0xdf |
| MX8MQ_IOMUXC_SD1_DATA7_USDHC1_DATA7 0xdf |
| MX8MQ_IOMUXC_SD1_STROBE_USDHC1_STROBE 0x9f |
| MX8MQ_IOMUXC_SD1_RESET_B_USDHC1_RESET_B 0xc1 |
| >; |
| }; |
| |
| pinctrl_usdhc2: usdhc2grp { |
| fsl,pins = < |
| MX8MQ_IOMUXC_SD2_CD_B_GPIO2_IO12 0x80 |
| MX8MQ_IOMUXC_SD2_CLK_USDHC2_CLK 0x83 |
| MX8MQ_IOMUXC_SD2_CMD_USDHC2_CMD 0xc3 |
| MX8MQ_IOMUXC_SD2_DATA0_USDHC2_DATA0 0xc3 |
| MX8MQ_IOMUXC_SD2_DATA1_USDHC2_DATA1 0xc3 |
| MX8MQ_IOMUXC_SD2_DATA2_USDHC2_DATA2 0xc3 |
| MX8MQ_IOMUXC_SD2_DATA3_USDHC2_DATA3 0xc3 |
| MX8MQ_IOMUXC_SD2_RESET_B_USDHC2_RESET_B 0xc1 |
| >; |
| }; |
| |
| pinctrl_usdhc2_100mhz: usdhc2-100mhzgrp { |
| fsl,pins = < |
| MX8MQ_IOMUXC_SD2_CD_B_GPIO2_IO12 0x80 |
| MX8MQ_IOMUXC_SD2_CLK_USDHC2_CLK 0x8d |
| MX8MQ_IOMUXC_SD2_CMD_USDHC2_CMD 0xcd |
| MX8MQ_IOMUXC_SD2_DATA0_USDHC2_DATA0 0xcd |
| MX8MQ_IOMUXC_SD2_DATA1_USDHC2_DATA1 0xcd |
| MX8MQ_IOMUXC_SD2_DATA2_USDHC2_DATA2 0xcd |
| MX8MQ_IOMUXC_SD2_DATA3_USDHC2_DATA3 0xcd |
| MX8MQ_IOMUXC_SD2_RESET_B_USDHC2_RESET_B 0xc1 |
| >; |
| }; |
| |
| pinctrl_usdhc2_200mhz: usdhc2-200mhzgrp { |
| fsl,pins = < |
| MX8MQ_IOMUXC_SD2_CD_B_GPIO2_IO12 0x80 |
| MX8MQ_IOMUXC_SD2_CLK_USDHC2_CLK 0x9f |
| MX8MQ_IOMUXC_SD2_CMD_USDHC2_CMD 0xcf |
| MX8MQ_IOMUXC_SD2_DATA0_USDHC2_DATA0 0xcf |
| MX8MQ_IOMUXC_SD2_DATA1_USDHC2_DATA1 0xcf |
| MX8MQ_IOMUXC_SD2_DATA2_USDHC2_DATA2 0xcf |
| MX8MQ_IOMUXC_SD2_DATA3_USDHC2_DATA3 0xcf |
| MX8MQ_IOMUXC_SD2_RESET_B_USDHC2_RESET_B 0xc1 |
| >; |
| }; |
| |
| pinctrl_wifi_disable: wifidisablegrp { |
| fsl,pins = < |
| /* WIFI_REG_ON */ |
| MX8MQ_IOMUXC_SAI3_RXC_GPIO4_IO29 0x83 |
| >; |
| }; |
| |
| pinctrl_wifi_pwr: wifipwrgrp { |
| fsl,pins = < |
| /* WIFI3V3_EN */ |
| MX8MQ_IOMUXC_NAND_DATA04_GPIO3_IO10 0x83 |
| >; |
| }; |
| |
| pinctrl_wdog: wdoggrp { |
| fsl,pins = < |
| /* nWDOG */ |
| MX8MQ_IOMUXC_GPIO1_IO02_WDOG1_WDOG_B 0x1f |
| >; |
| }; |
| }; |
| |
| &i2c1 { |
| clock-frequency = <384000>; |
| pinctrl-names = "default"; |
| pinctrl-0 = <&pinctrl_i2c1>; |
| status = "okay"; |
| |
| typec_pd: usb-pd@3f { |
| compatible = "ti,tps6598x"; |
| reg = <0x3f>; |
| pinctrl-names = "default"; |
| pinctrl-0 = <&pinctrl_typec>, <&pinctrl_tcpc>; |
| interrupt-parent = <&gpio1>; |
| interrupts = <10 IRQ_TYPE_LEVEL_LOW>; |
| interrupt-names = "irq"; |
| extcon = <&usb3_phy0>; |
| wakeup-source; |
| |
| connector { |
| compatible = "usb-c-connector"; |
| label = "USB-C"; |
| data-role = "dual"; |
| |
| ports { |
| #address-cells = <1>; |
| #size-cells = <0>; |
| |
| port@0 { |
| reg = <0>; |
| |
| usb_con_hs: endpoint { |
| remote-endpoint = <&typec_hs>; |
| }; |
| }; |
| |
| port@1 { |
| reg = <1>; |
| |
| usb_con_ss: endpoint { |
| remote-endpoint = <&typec_ss>; |
| }; |
| }; |
| }; |
| }; |
| }; |
| |
| pmic: pmic@4b { |
| compatible = "rohm,bd71837"; |
| reg = <0x4b>; |
| pinctrl-names = "default"; |
| pinctrl-0 = <&pinctrl_pmic>, <&pinctrl_camera_pwr>; |
| clocks = <&pmic_osc>; |
| #clock-cells = <0>; |
| clock-names = "osc"; |
| clock-output-names = "pmic_clk"; |
| interrupt-parent = <&gpio1>; |
| interrupts = <7 IRQ_TYPE_LEVEL_LOW>; |
| rohm,reset-snvs-powered; |
| |
| regulators { |
| buck1_reg: BUCK1 { |
| regulator-name = "buck1"; |
| regulator-min-microvolt = <700000>; |
| regulator-max-microvolt = <1300000>; |
| regulator-boot-on; |
| regulator-ramp-delay = <1250>; |
| rohm,dvs-run-voltage = <880000>; |
| rohm,dvs-idle-voltage = <820000>; |
| rohm,dvs-suspend-voltage = <810000>; |
| regulator-always-on; |
| }; |
| |
| buck2_reg: BUCK2 { |
| regulator-name = "buck2"; |
| regulator-min-microvolt = <700000>; |
| regulator-max-microvolt = <1300000>; |
| regulator-boot-on; |
| regulator-ramp-delay = <1250>; |
| rohm,dvs-run-voltage = <950000>; |
| rohm,dvs-idle-voltage = <850000>; |
| regulator-always-on; |
| }; |
| |
| buck3_reg: BUCK3 { |
| regulator-name = "buck3"; |
| regulator-min-microvolt = <700000>; |
| regulator-max-microvolt = <1300000>; |
| regulator-boot-on; |
| rohm,dvs-run-voltage = <850000>; |
| }; |
| |
| buck4_reg: BUCK4 { |
| regulator-name = "buck4"; |
| regulator-min-microvolt = <700000>; |
| regulator-max-microvolt = <1300000>; |
| rohm,dvs-run-voltage = <930000>; |
| }; |
| |
| buck5_reg: BUCK5 { |
| regulator-name = "buck5"; |
| regulator-min-microvolt = <700000>; |
| regulator-max-microvolt = <1350000>; |
| regulator-boot-on; |
| regulator-always-on; |
| }; |
| |
| buck6_reg: BUCK6 { |
| regulator-name = "buck6"; |
| regulator-min-microvolt = <3000000>; |
| regulator-max-microvolt = <3300000>; |
| regulator-boot-on; |
| regulator-always-on; |
| }; |
| |
| buck7_reg: BUCK7 { |
| regulator-name = "buck7"; |
| regulator-min-microvolt = <1605000>; |
| regulator-max-microvolt = <1995000>; |
| regulator-boot-on; |
| regulator-always-on; |
| }; |
| |
| buck8_reg: BUCK8 { |
| regulator-name = "buck8"; |
| regulator-min-microvolt = <800000>; |
| regulator-max-microvolt = <1400000>; |
| regulator-boot-on; |
| regulator-always-on; |
| }; |
| |
| ldo1_reg: LDO1 { |
| regulator-name = "ldo1"; |
| regulator-min-microvolt = <3000000>; |
| regulator-max-microvolt = <3300000>; |
| regulator-boot-on; |
| /* leave on for snvs power button */ |
| regulator-always-on; |
| }; |
| |
| ldo2_reg: LDO2 { |
| regulator-name = "ldo2"; |
| regulator-min-microvolt = <900000>; |
| regulator-max-microvolt = <900000>; |
| regulator-boot-on; |
| /* leave on for snvs power button */ |
| regulator-always-on; |
| }; |
| |
| ldo3_reg: LDO3 { |
| regulator-name = "ldo3"; |
| regulator-min-microvolt = <1800000>; |
| regulator-max-microvolt = <3300000>; |
| regulator-boot-on; |
| regulator-always-on; |
| }; |
| |
| ldo4_reg: LDO4 { |
| regulator-name = "ldo4"; |
| regulator-min-microvolt = <900000>; |
| regulator-max-microvolt = <1800000>; |
| regulator-boot-on; |
| regulator-always-on; |
| }; |
| |
| ldo5_reg: LDO5 { |
| /* VDD_PHY_0V9 - MIPI and HDMI domains */ |
| regulator-name = "ldo5"; |
| regulator-min-microvolt = <1800000>; |
| regulator-max-microvolt = <3300000>; |
| regulator-always-on; |
| }; |
| |
| ldo6_reg: LDO6 { |
| /* VDD_PHY_0V9 - MIPI, HDMI and USB domains */ |
| regulator-name = "ldo6"; |
| regulator-min-microvolt = <900000>; |
| regulator-max-microvolt = <1800000>; |
| regulator-boot-on; |
| regulator-always-on; |
| }; |
| |
| ldo7_reg: LDO7 { |
| /* VDD_PHY_3V3 - USB domain */ |
| regulator-name = "ldo7"; |
| regulator-min-microvolt = <1800000>; |
| regulator-max-microvolt = <3300000>; |
| regulator-boot-on; |
| regulator-always-on; |
| }; |
| }; |
| }; |
| |
| rtc@68 { |
| compatible = "microcrystal,rv4162"; |
| reg = <0x68>; |
| pinctrl-names = "default"; |
| pinctrl-0 = <&pinctrl_rtc>; |
| interrupt-parent = <&gpio1>; |
| interrupts = <9 IRQ_TYPE_LEVEL_LOW>; |
| }; |
| }; |
| |
| &i2c2 { |
| clock-frequency = <384000>; |
| pinctrl-names = "default"; |
| pinctrl-0 = <&pinctrl_i2c2>; |
| status = "okay"; |
| |
| magnetometer: magnetometer@1e { |
| compatible = "st,lsm9ds1-magn"; |
| reg = <0x1e>; |
| pinctrl-names = "default"; |
| pinctrl-0 = <&pinctrl_mag>; |
| interrupt-parent = <&gpio3>; |
| interrupts = <22 IRQ_TYPE_LEVEL_HIGH>; |
| vdd-supply = <®_vdd_sen>; |
| vddio-supply = <®_vdd_1v8>; |
| }; |
| |
| regulator@3e { |
| compatible = "tps65132"; |
| reg = <0x3e>; |
| |
| reg_lcd_avdd: outp { |
| regulator-name = "LCD_AVDD"; |
| vin-supply = <®_lcd_3v4>; |
| }; |
| |
| reg_lcd_avee: outn { |
| regulator-name = "LCD_AVEE"; |
| vin-supply = <®_lcd_3v4>; |
| }; |
| }; |
| |
| proximity: prox@60 { |
| compatible = "vishay,vcnl4040"; |
| reg = <0x60>; |
| pinctrl-names = "default"; |
| pinctrl-0 = <&pinctrl_prox>; |
| interrupt-parent = <&gpio3>; |
| interrupts = <7 IRQ_TYPE_LEVEL_LOW>; |
| }; |
| |
| accel_gyro: accel-gyro@6a { |
| compatible = "st,lsm9ds1-imu"; |
| reg = <0x6a>; |
| vdd-supply = <®_vdd_sen>; |
| vddio-supply = <®_vdd_1v8>; |
| }; |
| }; |
| |
| &i2c3 { |
| clock-frequency = <384000>; |
| pinctrl-names = "default"; |
| pinctrl-0 = <&pinctrl_i2c3>; |
| status = "okay"; |
| |
| codec: audio-codec@1a { |
| compatible = "wlf,wm8962"; |
| reg = <0x1a>; |
| clocks = <&clk IMX8MQ_CLK_SAI2_ROOT>; |
| assigned-clocks = <&clk IMX8MQ_CLK_SAI2>; |
| assigned-clock-parents = <&clk IMX8MQ_AUDIO_PLL1_OUT>; |
| assigned-clock-rates = <24576000>; |
| #sound-dai-cells = <0>; |
| mic-cfg = <0x200>; |
| DCVDD-supply = <®_aud_1v8>; |
| DBVDD-supply = <®_aud_1v8>; |
| AVDD-supply = <®_aud_1v8>; |
| CPVDD-supply = <®_aud_1v8>; |
| MICVDD-supply = <®_mic_2v4>; |
| PLLVDD-supply = <®_aud_1v8>; |
| SPKVDD1-supply = <®_vsys_3v4>; |
| SPKVDD2-supply = <®_vsys_3v4>; |
| gpio-cfg = < |
| 0x0000 /* n/c */ |
| 0x0001 /* gpio2, 1: default */ |
| 0x0013 /* gpio3, 2: dmicclk */ |
| 0x0000 /* n/c, 3: default */ |
| 0x8014 /* gpio5, 4: dmic_dat */ |
| 0x0000 /* gpio6, 5: default */ |
| >; |
| }; |
| |
| camera_front: camera@20 { |
| compatible = "hynix,hi846"; |
| reg = <0x20>; |
| pinctrl-names = "default"; |
| pinctrl-0 = <&pinctrl_csi1>; |
| clocks = <&clk IMX8MQ_CLK_CLKO2>; |
| assigned-clocks = <&clk IMX8MQ_CLK_CLKO2>; |
| assigned-clock-rates = <25000000>; |
| reset-gpios = <&gpio1 25 GPIO_ACTIVE_LOW>; |
| vdda-supply = <®_vcam_2v8>; |
| vddd-supply = <®_vcam_1v2>; |
| vddio-supply = <®_csi_1v8>; |
| rotation = <90>; |
| orientation = <0>; |
| |
| port { |
| camera1_ep: endpoint { |
| data-lanes = <1 2>; |
| link-frequencies = /bits/ 64 |
| <80000000 200000000 300000000>; |
| remote-endpoint = <&mipi1_sensor_ep>; |
| }; |
| }; |
| }; |
| |
| backlight@36 { |
| compatible = "ti,lm36922"; |
| reg = <0x36>; |
| pinctrl-names = "default"; |
| pinctrl-0 = <&pinctrl_bl>; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| enable-gpios = <&gpio3 14 GPIO_ACTIVE_HIGH>; |
| vled-supply = <®_vsys_3v4>; |
| ti,ovp-microvolt = <25000000>; |
| |
| led_backlight: led@0 { |
| reg = <0>; |
| label = ":backlight"; |
| linux,default-trigger = "backlight"; |
| led-max-microamp = <20000>; |
| }; |
| }; |
| |
| touchscreen@38 { |
| compatible = "edt,edt-ft5506"; |
| reg = <0x38>; |
| pinctrl-names = "default"; |
| pinctrl-0 = <&pinctrl_touch>; |
| interrupt-parent = <&gpio1>; |
| interrupts = <27 IRQ_TYPE_EDGE_FALLING>; |
| touchscreen-size-x = <720>; |
| touchscreen-size-y = <1440>; |
| vcc-supply = <®_lcd_1v8>; |
| }; |
| }; |
| |
| &i2c4 { |
| clock-frequency = <384000>; |
| pinctrl-names = "default"; |
| pinctrl-0 = <&pinctrl_i2c4>; |
| status = "okay"; |
| |
| vcm@c { |
| compatible = "dongwoon,dw9714"; |
| reg = <0x0c>; |
| vcc-supply = <®_csi_1v8>; |
| }; |
| |
| bat: fuel-gauge@36 { |
| compatible = "maxim,max17055"; |
| reg = <0x36>; |
| interrupt-parent = <&gpio3>; |
| interrupts = <20 IRQ_TYPE_LEVEL_LOW>; |
| pinctrl-names = "default"; |
| pinctrl-0 = <&pinctrl_gauge>; |
| power-supplies = <&bq25895>; |
| maxim,over-heat-temp = <700>; |
| maxim,over-volt = <4500>; |
| maxim,rsns-microohm = <5000>; |
| }; |
| |
| bq25895: charger@6a { |
| compatible = "ti,bq25895", "ti,bq25890"; |
| reg = <0x6a>; |
| pinctrl-names = "default"; |
| pinctrl-0 = <&pinctrl_charger_in>; |
| interrupt-parent = <&gpio3>; |
| interrupts = <3 IRQ_TYPE_EDGE_FALLING>; |
| phys = <&usb3_phy0>; |
| ti,battery-regulation-voltage = <4208000>; /* uV */ |
| ti,termination-current = <128000>; /* uA */ |
| ti,precharge-current = <128000>; /* uA */ |
| ti,minimum-sys-voltage = <3700000>; /* uV */ |
| ti,boost-voltage = <5000000>; /* uV */ |
| ti,boost-max-current = <1500000>; /* uA */ |
| ti,use-vinmin-threshold = <1>; /* enable VINDPM */ |
| ti,vinmin-threshold = <3900000>; /* uV */ |
| monitored-battery = <&bat>; |
| power-supplies = <&typec_pd>; |
| }; |
| }; |
| |
| &lcdif { |
| status = "okay"; |
| }; |
| |
| &mipi_csi1 { |
| assigned-clock-rates = <266000000>, <200000000>, <66000000>; |
| status = "okay"; |
| |
| ports { |
| port@0 { |
| reg = <0>; |
| |
| mipi1_sensor_ep: endpoint { |
| remote-endpoint = <&camera1_ep>; |
| data-lanes = <1 2>; |
| }; |
| }; |
| }; |
| }; |
| |
| &mipi_dsi { |
| #address-cells = <1>; |
| #size-cells = <0>; |
| status = "okay"; |
| |
| lcd_panel: panel@0 { |
| compatible = "mantix,mlaf057we51-x"; |
| reg = <0>; |
| pinctrl-names = "default"; |
| pinctrl-0 = <&pinctrl_dsirst>; |
| avdd-supply = <®_lcd_avdd>; |
| avee-supply = <®_lcd_avee>; |
| vddi-supply = <®_lcd_1v8>; |
| backlight = <&backlight_dsi>; |
| reset-gpios = <&gpio1 29 GPIO_ACTIVE_LOW>; |
| mantix,tp-rstn-gpios = <&gpio1 24 GPIO_ACTIVE_LOW>; |
| |
| port { |
| panel_in: endpoint { |
| remote-endpoint = <&mipi_dsi_out>; |
| }; |
| }; |
| }; |
| |
| ports { |
| port@1 { |
| reg = <1>; |
| |
| mipi_dsi_out: endpoint { |
| remote-endpoint = <&panel_in>; |
| }; |
| }; |
| }; |
| }; |
| |
| &pgc_gpu { |
| power-supply = <&buck3_reg>; |
| }; |
| |
| &pgc_mipi { |
| power-supply = <&ldo5_reg>; |
| }; |
| |
| &pgc_vpu { |
| power-supply = <&buck4_reg>; |
| }; |
| |
| &pwm1 { |
| pinctrl-names = "default"; |
| pinctrl-0 = <&pinctrl_haptic>; |
| status = "okay"; |
| }; |
| |
| &pwm2 { |
| pinctrl-names = "default"; |
| pinctrl-0 = <&pinctrl_led_b>; |
| status = "okay"; |
| }; |
| |
| &pwm3 { |
| pinctrl-names = "default"; |
| pinctrl-0 = <&pinctrl_led_r>; |
| status = "okay"; |
| }; |
| |
| &pwm4 { |
| pinctrl-names = "default"; |
| pinctrl-0 = <&pinctrl_led_g>; |
| status = "okay"; |
| }; |
| |
| &sai2 { |
| pinctrl-names = "default"; |
| pinctrl-0 = <&pinctrl_sai2>; |
| assigned-clocks = <&clk IMX8MQ_CLK_SAI2>; |
| assigned-clock-parents = <&clk IMX8MQ_AUDIO_PLL1_OUT>; |
| assigned-clock-rates = <24576000>; |
| status = "okay"; |
| }; |
| |
| &sai6 { |
| pinctrl-names = "default"; |
| pinctrl-0 = <&pinctrl_sai6>; |
| assigned-clocks = <&clk IMX8MQ_CLK_SAI6>; |
| assigned-clock-parents = <&clk IMX8MQ_AUDIO_PLL1_OUT>; |
| assigned-clock-rates = <24576000>; |
| fsl,sai-synchronous-rx; |
| status = "okay"; |
| }; |
| |
| &snvs_pwrkey { |
| status = "okay"; |
| }; |
| |
| &snvs_rtc { |
| status = "disabled"; |
| }; |
| |
| &uart1 { /* console */ |
| pinctrl-names = "default"; |
| pinctrl-0 = <&pinctrl_uart1>; |
| status = "okay"; |
| }; |
| |
| &uart2 { /* TPS - GPS - DEBUG */ |
| pinctrl-names = "default"; |
| pinctrl-0 = <&pinctrl_uart2>; |
| status = "okay"; |
| |
| gnss { |
| compatible = "globaltop,pa6h"; |
| vcc-supply = <®_gnss>; |
| current-speed = <9600>; |
| }; |
| }; |
| |
| &uart3 { /* SMC */ |
| pinctrl-names = "default"; |
| pinctrl-0 = <&pinctrl_uart3>; |
| status = "okay"; |
| }; |
| |
| &uart4 { /* BT */ |
| pinctrl-names = "default"; |
| pinctrl-0 = <&pinctrl_uart4>; |
| uart-has-rtscts; |
| status = "okay"; |
| }; |
| |
| &usb3_phy0 { |
| status = "okay"; |
| }; |
| |
| &usb3_phy1 { |
| vbus-supply = <®_hub>; |
| status = "okay"; |
| }; |
| |
| &usb_dwc3_0 { |
| #address-cells = <1>; |
| #size-cells = <0>; |
| dr_mode = "otg"; |
| usb-role-switch; |
| status = "okay"; |
| |
| port@0 { |
| reg = <0>; |
| |
| typec_hs: endpoint { |
| remote-endpoint = <&usb_con_hs>; |
| }; |
| }; |
| |
| port@1 { |
| reg = <1>; |
| |
| typec_ss: endpoint { |
| remote-endpoint = <&usb_con_ss>; |
| }; |
| }; |
| }; |
| |
| &usb_dwc3_1 { |
| dr_mode = "host"; |
| status = "okay"; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| |
| /* Microchip USB2642 */ |
| hub@1 { |
| compatible = "usb424,2640"; |
| reg = <1>; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| |
| mass-storage@1 { |
| compatible = "usb424,4041"; |
| reg = <1>; |
| }; |
| }; |
| }; |
| |
| &usdhc1 { |
| assigned-clocks = <&clk IMX8MQ_CLK_USDHC1>; |
| assigned-clock-rates = <400000000>; |
| pinctrl-names = "default", "state_100mhz", "state_200mhz"; |
| pinctrl-0 = <&pinctrl_usdhc1>; |
| pinctrl-1 = <&pinctrl_usdhc1_100mhz>; |
| pinctrl-2 = <&pinctrl_usdhc1_200mhz>; |
| bus-width = <8>; |
| vmmc-supply = <®_vdd_3v3>; |
| vqmmc-supply = <®_vdd_1v8>; |
| non-removable; |
| status = "okay"; |
| }; |
| |
| &usdhc2 { |
| assigned-clocks = <&clk IMX8MQ_CLK_USDHC2>; |
| assigned-clock-rates = <200000000>; |
| pinctrl-names = "default", "state_100mhz", "state_200mhz"; |
| pinctrl-0 = <&pinctrl_usdhc2>; |
| pinctrl-1 = <&pinctrl_usdhc2_100mhz>; |
| pinctrl-2 = <&pinctrl_usdhc2_200mhz>; |
| bus-width = <4>; |
| vmmc-supply = <®_wifi_3v3>; |
| mmc-pwrseq = <&usdhc2_pwrseq>; |
| post-power-on-delay-ms = <20>; |
| cd-gpios = <&gpio2 12 GPIO_ACTIVE_LOW>; |
| max-frequency = <100000000>; |
| disable-wp; |
| cap-sdio-irq; |
| keep-power-in-suspend; |
| wakeup-source; |
| status = "okay"; |
| }; |
| |
| &wdog1 { |
| pinctrl-names = "default"; |
| pinctrl-0 = <&pinctrl_wdog>; |
| fsl,ext-reset-output; |
| status = "okay"; |
| }; |
| |
| &a53_opp_table { |
| opp-1000000000 { |
| opp-microvolt = <850000>; |
| }; |
| |
| opp-1500000000 { |
| opp-microvolt = <950000>; |
| }; |
| }; |
