arch/powerpc/boot/dts/fsl/t208xqds.dtsi - linux - Git at Google

 /*
  * T2080/T2081 QDS Device Tree Source
  *
  * Copyright 2013 - 2014 Freescale Semiconductor Inc.
  *
  * Redistribution and use in source and binary forms, with or without
  * modification, are permitted provided that the following conditions are met:
  *     * Redistributions of source code must retain the above copyright
  *	 notice, this list of conditions and the following disclaimer.
  *     * Redistributions in binary form must reproduce the above copyright
  *	 notice, this list of conditions and the following disclaimer in the
  *	 documentation and/or other materials provided with the distribution.
  *     * Neither the name of Freescale Semiconductor nor the
  *	 names of its contributors may be used to endorse or promote products
  *	 derived from this software without specific prior written permission.
  *
  *
  * ALTERNATIVELY, this software may be distributed under the terms of the
  * GNU General Public License ("GPL") as published by the Free Software
  * Foundation, either version 2 of that License or (at your option) any
  * later version.
  *
  * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor "AS IS" AND ANY
  * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
  * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
  * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
  * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
  * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
  * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
  * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
  * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
  * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
  */

 / {
 	model = "fsl,T2080QDS";
 	compatible = "fsl,T2080QDS";
 	#address-cells = <2>;
 	#size-cells = <2>;
 	interrupt-parent = <&mpic>;

 	reserved-memory {
 		#address-cells = <2>;
 		#size-cells = <2>;
 		ranges;

 		bman_fbpr: bman-fbpr {
 			size = <0 0x1000000>;
 			alignment = <0 0x1000000>;
 		};
 		qman_fqd: qman-fqd {
 			size = <0 0x400000>;
 			alignment = <0 0x400000>;
 		};
 		qman_pfdr: qman-pfdr {
 			size = <0 0x2000000>;
 			alignment = <0 0x2000000>;
 		};
 	};

 	ifc: localbus@ffe124000 {
 		reg = <0xf 0xfe124000 0 0x2000>;
 		ranges = <0 0 0xf 0xe8000000 0x08000000
 			  2 0 0xf 0xff800000 0x00010000
 			  3 0 0xf 0xffdf0000 0x00008000>;

 		nor@0,0 {
 			#address-cells = <1>;
 			#size-cells = <1>;
 			compatible = "cfi-flash";
 			reg = <0x0 0x0 0x8000000>;
 			bank-width = <2>;
 			device-width = <1>;
 		};

 		nand@2,0 {
 			#address-cells = <1>;
 			#size-cells = <1>;
 			compatible = "fsl,ifc-nand";
 			reg = <0x2 0x0 0x10000>;
 		};

 		boardctrl: board-control@3,0 {
 			#address-cells = <1>;
 			#size-cells = <1>;
 			compatible = "fsl,fpga-qixis";
 			reg = <3 0 0x300>;
 			ranges = <0 3 0 0x300>;
 		};
 	};

 	memory {
 		device_type = "memory";
 	};

 	dcsr: dcsr@f00000000 {
 		ranges = <0x00000000 0xf 0x00000000 0x01072000>;
 	};

 	bportals: bman-portals@ff4000000 {
 		ranges = <0x0 0xf 0xf4000000 0x2000000>;
 	};

 	qportals: qman-portals@ff6000000 {
 		ranges = <0x0 0xf 0xf6000000 0x2000000>;
 	};

 	soc: soc@ffe000000 {
 		ranges = <0x00000000 0xf 0xfe000000 0x1000000>;
 		reg = <0xf 0xfe000000 0 0x00001000>;
 		spi@110000 {
 			flash@0 {
 				#address-cells = <1>;
 				#size-cells = <1>;
 				compatible = "micron,n25q128a11", "jedec,spi-nor"; /* 16MB */
 				reg = <0>;
 				spi-max-frequency = <40000000>; /* input clock */
 			};

 			flash@1 {
 				#address-cells = <1>;
 				#size-cells = <1>;
 				compatible = "sst,sst25wf040", "jedec,spi-nor";
 				reg = <1>;
 				spi-max-frequency = <35000000>;
 			};

 			flash@2 {
 				#address-cells = <1>;
 				#size-cells = <1>;
 				compatible = "eon,en25s64", "jedec,spi-nor";
 				reg = <2>;
 				spi-max-frequency = <35000000>;
 			};
 		};

 		i2c@118000 {
 			i2c-mux@77 {
 				compatible = "nxp,pca9547";
 				reg = <0x77>;
 				#address-cells = <1>;
 				#size-cells = <0>;

 				i2c@0 {
 					#address-cells = <1>;
 					#size-cells = <0>;
 					reg = <0x0>;

 					eeprom@50 {
 						compatible = "atmel,24c512";
 						reg = <0x50>;
 					};

 					eeprom@51 {
 						compatible = "atmel,24c02";
 						reg = <0x51>;
 					};

 					eeprom@57 {
 						compatible = "atmel,24c02";
 						reg = <0x57>;
 					};

 					rtc@68 {
 						compatible = "dallas,ds3232";
 						reg = <0x68>;
 						interrupts = <0xb 0x1 0 0>;
 					};
 				};

 				i2c@1 {
 					#address-cells = <1>;
 					#size-cells = <0>;
 					reg = <0x1>;

 					eeprom@55 {
 						compatible = "atmel,24c02";
 						reg = <0x55>;
 					};
 				};

 				i2c@2 {
 					#address-cells = <1>;
 					#size-cells = <0>;
 					reg = <0x2>;

 					ina220@40 {
 						compatible = "ti,ina220";
 						reg = <0x40>;
 						shunt-resistor = <1000>;
 					};

 					ina220@41 {
 						compatible = "ti,ina220";
 						reg = <0x41>;
 						shunt-resistor = <1000>;
 					};
 				};

 				i2c@3 {
 					#address-cells = <1>;
 					#size-cells = <0>;
 					reg = <0x3>;

 					adt7461@4c {
 						compatible = "adi,adt7461";
 						reg = <0x4c>;
 					};
 				};
 			};
 		};

 		sdhc@114000 {
 			voltage-ranges = <1800 1800 3300 3300>;
 		};
 	};

 	pci0: pcie@ffe240000 {
 		reg = <0xf 0xfe240000 0 0x10000>;
 		ranges = <0x02000000 0 0xe0000000 0xc 0x00000000 0x0 0x20000000
 			  0x01000000 0 0x00000000 0xf 0xf8000000 0x0 0x00010000>;
 		pcie@0 {
 			ranges = <0x02000000 0 0xe0000000
 				  0x02000000 0 0xe0000000
 				  0 0x20000000

 				  0x01000000 0 0x00000000
 				  0x01000000 0 0x00000000
 				  0 0x00010000>;
 		};
 	};

 	pci1: pcie@ffe250000 {
 		reg = <0xf 0xfe250000 0 0x10000>;
 		ranges = <0x02000000 0x0 0xe0000000 0xc 0x20000000 0x0 0x10000000
 			  0x01000000 0x0 0x00000000 0xf 0xf8010000 0x0 0x00010000>;
 		pcie@0 {
 			ranges = <0x02000000 0 0xe0000000
 				  0x02000000 0 0xe0000000
 				  0 0x20000000

 				  0x01000000 0 0x00000000
 				  0x01000000 0 0x00000000
 				  0 0x00010000>;
 		};
 	};

 	pci2: pcie@ffe260000 {
 		reg = <0xf 0xfe260000 0 0x1000>;
 		ranges = <0x02000000 0 0xe0000000 0xc 0x30000000 0 0x10000000
 			  0x01000000 0 0x00000000 0xf 0xf8020000 0 0x00010000>;
 		pcie@0 {
 			ranges = <0x02000000 0 0xe0000000
 				  0x02000000 0 0xe0000000
 				  0 0x20000000

 				  0x01000000 0 0x00000000
 				  0x01000000 0 0x00000000
 				  0 0x00010000>;
 		};
 	};

 	pci3: pcie@ffe270000 {
 		reg = <0xf 0xfe270000 0 0x10000>;
 		ranges = <0x02000000 0 0xe0000000 0xc 0x40000000 0 0x10000000
 			  0x01000000 0 0x00000000 0xf 0xf8030000 0 0x00010000>;
 		pcie@0 {
 			ranges = <0x02000000 0 0xe0000000
 				  0x02000000 0 0xe0000000
 				  0 0x20000000

 				  0x01000000 0 0x00000000
 				  0x01000000 0 0x00000000
 				  0 0x00010000>;
 		};
 	};
 };
	/*
	* T2080/T2081 QDS Device Tree Source
	*
	* Copyright 2013 - 2014 Freescale Semiconductor Inc.
	*
	* Redistribution and use in source and binary forms, with or without
	* modification, are permitted provided that the following conditions are met:
	* * Redistributions of source code must retain the above copyright
	* notice, this list of conditions and the following disclaimer.
	* * Redistributions in binary form must reproduce the above copyright
	* notice, this list of conditions and the following disclaimer in the
	* documentation and/or other materials provided with the distribution.
	* * Neither the name of Freescale Semiconductor nor the
	* names of its contributors may be used to endorse or promote products
	* derived from this software without specific prior written permission.
	*
	*
	* ALTERNATIVELY, this software may be distributed under the terms of the
	* GNU General Public License ("GPL") as published by the Free Software
	* Foundation, either version 2 of that License or (at your option) any
	* later version.
	*
	* THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor "AS IS" AND ANY
	* EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
	* WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
	* DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
	* DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
	* (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
	* LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
	* ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
	* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
	* SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
	*/

	/ {
	model = "fsl,T2080QDS";
	compatible = "fsl,T2080QDS";
	#address-cells = <2>;
	#size-cells = <2>;
	interrupt-parent = <&mpic>;

	reserved-memory {
	#address-cells = <2>;
	#size-cells = <2>;
	ranges;

	bman_fbpr: bman-fbpr {
	size = <0 0x1000000>;
	alignment = <0 0x1000000>;
	};
	qman_fqd: qman-fqd {
	size = <0 0x400000>;
	alignment = <0 0x400000>;
	};
	qman_pfdr: qman-pfdr {
	size = <0 0x2000000>;
	alignment = <0 0x2000000>;
	};
	};

	ifc: localbus@ffe124000 {
	reg = <0xf 0xfe124000 0 0x2000>;
	ranges = <0 0 0xf 0xe8000000 0x08000000
	2 0 0xf 0xff800000 0x00010000
	3 0 0xf 0xffdf0000 0x00008000>;

	nor@0,0 {
	#address-cells = <1>;
	#size-cells = <1>;
	compatible = "cfi-flash";
	reg = <0x0 0x0 0x8000000>;
	bank-width = <2>;
	device-width = <1>;
	};

	nand@2,0 {
	#address-cells = <1>;
	#size-cells = <1>;
	compatible = "fsl,ifc-nand";
	reg = <0x2 0x0 0x10000>;
	};

	boardctrl: board-control@3,0 {
	#address-cells = <1>;
	#size-cells = <1>;
	compatible = "fsl,fpga-qixis";
	reg = <3 0 0x300>;
	ranges = <0 3 0 0x300>;
	};
	};

	memory {
	device_type = "memory";
	};

	dcsr: dcsr@f00000000 {
	ranges = <0x00000000 0xf 0x00000000 0x01072000>;
	};

	bportals: bman-portals@ff4000000 {
	ranges = <0x0 0xf 0xf4000000 0x2000000>;
	};

	qportals: qman-portals@ff6000000 {
	ranges = <0x0 0xf 0xf6000000 0x2000000>;
	};

	soc: soc@ffe000000 {
	ranges = <0x00000000 0xf 0xfe000000 0x1000000>;
	reg = <0xf 0xfe000000 0 0x00001000>;
	spi@110000 {
	flash@0 {
	#address-cells = <1>;
	#size-cells = <1>;
	compatible = "micron,n25q128a11", "jedec,spi-nor"; /* 16MB */
	reg = <0>;
	spi-max-frequency = <40000000>; /* input clock */
	};

	flash@1 {
	#address-cells = <1>;
	#size-cells = <1>;
	compatible = "sst,sst25wf040", "jedec,spi-nor";
	reg = <1>;
	spi-max-frequency = <35000000>;
	};

	flash@2 {
	#address-cells = <1>;
	#size-cells = <1>;
	compatible = "eon,en25s64", "jedec,spi-nor";
	reg = <2>;
	spi-max-frequency = <35000000>;
	};
	};

	i2c@118000 {
	i2c-mux@77 {
	compatible = "nxp,pca9547";
	reg = <0x77>;
	#address-cells = <1>;
	#size-cells = <0>;

	i2c@0 {
	#address-cells = <1>;
	#size-cells = <0>;
	reg = <0x0>;

	eeprom@50 {
	compatible = "atmel,24c512";
	reg = <0x50>;
	};

	eeprom@51 {
	compatible = "atmel,24c02";
	reg = <0x51>;
	};

	eeprom@57 {
	compatible = "atmel,24c02";
	reg = <0x57>;
	};

	rtc@68 {
	compatible = "dallas,ds3232";
	reg = <0x68>;
	interrupts = <0xb 0x1 0 0>;
	};
	};

	i2c@1 {
	#address-cells = <1>;
	#size-cells = <0>;
	reg = <0x1>;

	eeprom@55 {
	compatible = "atmel,24c02";
	reg = <0x55>;
	};
	};

	i2c@2 {
	#address-cells = <1>;
	#size-cells = <0>;
	reg = <0x2>;

	ina220@40 {
	compatible = "ti,ina220";
	reg = <0x40>;
	shunt-resistor = <1000>;
	};

	ina220@41 {
	compatible = "ti,ina220";
	reg = <0x41>;
	shunt-resistor = <1000>;
	};
	};

	i2c@3 {
	#address-cells = <1>;
	#size-cells = <0>;
	reg = <0x3>;

	adt7461@4c {
	compatible = "adi,adt7461";
	reg = <0x4c>;
	};
	};
	};
	};

	sdhc@114000 {
	voltage-ranges = <1800 1800 3300 3300>;
	};
	};

	pci0: pcie@ffe240000 {
	reg = <0xf 0xfe240000 0 0x10000>;
	ranges = <0x02000000 0 0xe0000000 0xc 0x00000000 0x0 0x20000000
	0x01000000 0 0x00000000 0xf 0xf8000000 0x0 0x00010000>;
	pcie@0 {
	ranges = <0x02000000 0 0xe0000000
	0x02000000 0 0xe0000000
	0 0x20000000

	0x01000000 0 0x00000000
	0x01000000 0 0x00000000
	0 0x00010000>;
	};
	};

	pci1: pcie@ffe250000 {
	reg = <0xf 0xfe250000 0 0x10000>;
	ranges = <0x02000000 0x0 0xe0000000 0xc 0x20000000 0x0 0x10000000
	0x01000000 0x0 0x00000000 0xf 0xf8010000 0x0 0x00010000>;
	pcie@0 {
	ranges = <0x02000000 0 0xe0000000
	0x02000000 0 0xe0000000
	0 0x20000000

	0x01000000 0 0x00000000
	0x01000000 0 0x00000000
	0 0x00010000>;
	};
	};

	pci2: pcie@ffe260000 {
	reg = <0xf 0xfe260000 0 0x1000>;
	ranges = <0x02000000 0 0xe0000000 0xc 0x30000000 0 0x10000000
	0x01000000 0 0x00000000 0xf 0xf8020000 0 0x00010000>;
	pcie@0 {
	ranges = <0x02000000 0 0xe0000000
	0x02000000 0 0xe0000000
	0 0x20000000

	0x01000000 0 0x00000000
	0x01000000 0 0x00000000
	0 0x00010000>;
	};
	};

	pci3: pcie@ffe270000 {
	reg = <0xf 0xfe270000 0 0x10000>;
	ranges = <0x02000000 0 0xe0000000 0xc 0x40000000 0 0x10000000
	0x01000000 0 0x00000000 0xf 0xf8030000 0 0x00010000>;
	pcie@0 {
	ranges = <0x02000000 0 0xe0000000
	0x02000000 0 0xe0000000
	0 0x20000000

	0x01000000 0 0x00000000
	0x01000000 0 0x00000000
	0 0x00010000>;
	};
	};
	};