| // SPDX-License-Identifier: GPL-2.0 |
| // |
| // IXP4 GPIO driver |
| // Copyright (C) 2019 Linus Walleij <linus.walleij@linaro.org> |
| // |
| // based on previous work and know-how from: |
| // Deepak Saxena <dsaxena@plexity.net> |
| |
| #include <linux/gpio/driver.h> |
| #include <linux/io.h> |
| #include <linux/irq.h> |
| #include <linux/irqdomain.h> |
| #include <linux/irqchip.h> |
| #include <linux/of_irq.h> |
| #include <linux/platform_device.h> |
| #include <linux/bitops.h> |
| |
| #define IXP4XX_REG_GPOUT 0x00 |
| #define IXP4XX_REG_GPOE 0x04 |
| #define IXP4XX_REG_GPIN 0x08 |
| #define IXP4XX_REG_GPIS 0x0C |
| #define IXP4XX_REG_GPIT1 0x10 |
| #define IXP4XX_REG_GPIT2 0x14 |
| #define IXP4XX_REG_GPCLK 0x18 |
| #define IXP4XX_REG_GPDBSEL 0x1C |
| |
| /* |
| * The hardware uses 3 bits to indicate interrupt "style". |
| * we clear and set these three bits accordingly. The lower 24 |
| * bits in two registers (GPIT1 and GPIT2) are used to set up |
| * the style for 8 lines each for a total of 16 GPIO lines. |
| */ |
| #define IXP4XX_GPIO_STYLE_ACTIVE_HIGH 0x0 |
| #define IXP4XX_GPIO_STYLE_ACTIVE_LOW 0x1 |
| #define IXP4XX_GPIO_STYLE_RISING_EDGE 0x2 |
| #define IXP4XX_GPIO_STYLE_FALLING_EDGE 0x3 |
| #define IXP4XX_GPIO_STYLE_TRANSITIONAL 0x4 |
| #define IXP4XX_GPIO_STYLE_MASK GENMASK(2, 0) |
| #define IXP4XX_GPIO_STYLE_SIZE 3 |
| |
| /** |
| * struct ixp4xx_gpio - IXP4 GPIO state container |
| * @dev: containing device for this instance |
| * @fwnode: the fwnode for this GPIO chip |
| * @gc: gpiochip for this instance |
| * @base: remapped I/O-memory base |
| * @irq_edge: Each bit represents an IRQ: 1: edge-triggered, |
| * 0: level triggered |
| */ |
| struct ixp4xx_gpio { |
| struct device *dev; |
| struct fwnode_handle *fwnode; |
| struct gpio_chip gc; |
| void __iomem *base; |
| unsigned long long irq_edge; |
| }; |
| |
| static void ixp4xx_gpio_irq_ack(struct irq_data *d) |
| { |
| struct gpio_chip *gc = irq_data_get_irq_chip_data(d); |
| struct ixp4xx_gpio *g = gpiochip_get_data(gc); |
| |
| __raw_writel(BIT(d->hwirq), g->base + IXP4XX_REG_GPIS); |
| } |
| |
| static void ixp4xx_gpio_mask_irq(struct irq_data *d) |
| { |
| struct gpio_chip *gc = irq_data_get_irq_chip_data(d); |
| |
| irq_chip_mask_parent(d); |
| gpiochip_disable_irq(gc, d->hwirq); |
| } |
| |
| static void ixp4xx_gpio_irq_unmask(struct irq_data *d) |
| { |
| struct gpio_chip *gc = irq_data_get_irq_chip_data(d); |
| struct ixp4xx_gpio *g = gpiochip_get_data(gc); |
| |
| /* ACK when unmasking if not edge-triggered */ |
| if (!(g->irq_edge & BIT(d->hwirq))) |
| ixp4xx_gpio_irq_ack(d); |
| |
| gpiochip_enable_irq(gc, d->hwirq); |
| irq_chip_unmask_parent(d); |
| } |
| |
| static int ixp4xx_gpio_irq_set_type(struct irq_data *d, unsigned int type) |
| { |
| struct gpio_chip *gc = irq_data_get_irq_chip_data(d); |
| struct ixp4xx_gpio *g = gpiochip_get_data(gc); |
| int line = d->hwirq; |
| unsigned long flags; |
| u32 int_style; |
| u32 int_reg; |
| u32 val; |
| |
| switch (type) { |
| case IRQ_TYPE_EDGE_BOTH: |
| irq_set_handler_locked(d, handle_edge_irq); |
| int_style = IXP4XX_GPIO_STYLE_TRANSITIONAL; |
| g->irq_edge |= BIT(d->hwirq); |
| break; |
| case IRQ_TYPE_EDGE_RISING: |
| irq_set_handler_locked(d, handle_edge_irq); |
| int_style = IXP4XX_GPIO_STYLE_RISING_EDGE; |
| g->irq_edge |= BIT(d->hwirq); |
| break; |
| case IRQ_TYPE_EDGE_FALLING: |
| irq_set_handler_locked(d, handle_edge_irq); |
| int_style = IXP4XX_GPIO_STYLE_FALLING_EDGE; |
| g->irq_edge |= BIT(d->hwirq); |
| break; |
| case IRQ_TYPE_LEVEL_HIGH: |
| irq_set_handler_locked(d, handle_level_irq); |
| int_style = IXP4XX_GPIO_STYLE_ACTIVE_HIGH; |
| g->irq_edge &= ~BIT(d->hwirq); |
| break; |
| case IRQ_TYPE_LEVEL_LOW: |
| irq_set_handler_locked(d, handle_level_irq); |
| int_style = IXP4XX_GPIO_STYLE_ACTIVE_LOW; |
| g->irq_edge &= ~BIT(d->hwirq); |
| break; |
| default: |
| return -EINVAL; |
| } |
| |
| if (line >= 8) { |
| /* pins 8-15 */ |
| line -= 8; |
| int_reg = IXP4XX_REG_GPIT2; |
| } else { |
| /* pins 0-7 */ |
| int_reg = IXP4XX_REG_GPIT1; |
| } |
| |
| raw_spin_lock_irqsave(&g->gc.bgpio_lock, flags); |
| |
| /* Clear the style for the appropriate pin */ |
| val = __raw_readl(g->base + int_reg); |
| val &= ~(IXP4XX_GPIO_STYLE_MASK << (line * IXP4XX_GPIO_STYLE_SIZE)); |
| __raw_writel(val, g->base + int_reg); |
| |
| __raw_writel(BIT(line), g->base + IXP4XX_REG_GPIS); |
| |
| /* Set the new style */ |
| val = __raw_readl(g->base + int_reg); |
| val |= (int_style << (line * IXP4XX_GPIO_STYLE_SIZE)); |
| __raw_writel(val, g->base + int_reg); |
| |
| /* Force-configure this line as an input */ |
| val = __raw_readl(g->base + IXP4XX_REG_GPOE); |
| val |= BIT(d->hwirq); |
| __raw_writel(val, g->base + IXP4XX_REG_GPOE); |
| |
| raw_spin_unlock_irqrestore(&g->gc.bgpio_lock, flags); |
| |
| /* This parent only accept level high (asserted) */ |
| return irq_chip_set_type_parent(d, IRQ_TYPE_LEVEL_HIGH); |
| } |
| |
| static const struct irq_chip ixp4xx_gpio_irqchip = { |
| .name = "IXP4GPIO", |
| .irq_ack = ixp4xx_gpio_irq_ack, |
| .irq_mask = ixp4xx_gpio_mask_irq, |
| .irq_unmask = ixp4xx_gpio_irq_unmask, |
| .irq_set_type = ixp4xx_gpio_irq_set_type, |
| .flags = IRQCHIP_IMMUTABLE, |
| GPIOCHIP_IRQ_RESOURCE_HELPERS, |
| }; |
| |
| static int ixp4xx_gpio_child_to_parent_hwirq(struct gpio_chip *gc, |
| unsigned int child, |
| unsigned int child_type, |
| unsigned int *parent, |
| unsigned int *parent_type) |
| { |
| /* All these interrupts are level high in the CPU */ |
| *parent_type = IRQ_TYPE_LEVEL_HIGH; |
| |
| /* GPIO lines 0..12 have dedicated IRQs */ |
| if (child == 0) { |
| *parent = 6; |
| return 0; |
| } |
| if (child == 1) { |
| *parent = 7; |
| return 0; |
| } |
| if (child >= 2 && child <= 12) { |
| *parent = child + 17; |
| return 0; |
| } |
| return -EINVAL; |
| } |
| |
| static int ixp4xx_gpio_probe(struct platform_device *pdev) |
| { |
| unsigned long flags; |
| struct device *dev = &pdev->dev; |
| struct device_node *np = dev->of_node; |
| struct irq_domain *parent; |
| struct ixp4xx_gpio *g; |
| struct gpio_irq_chip *girq; |
| struct device_node *irq_parent; |
| int ret; |
| |
| g = devm_kzalloc(dev, sizeof(*g), GFP_KERNEL); |
| if (!g) |
| return -ENOMEM; |
| g->dev = dev; |
| |
| g->base = devm_platform_ioremap_resource(pdev, 0); |
| if (IS_ERR(g->base)) |
| return PTR_ERR(g->base); |
| |
| irq_parent = of_irq_find_parent(np); |
| if (!irq_parent) { |
| dev_err(dev, "no IRQ parent node\n"); |
| return -ENODEV; |
| } |
| parent = irq_find_host(irq_parent); |
| if (!parent) { |
| dev_err(dev, "no IRQ parent domain\n"); |
| return -ENODEV; |
| } |
| g->fwnode = of_node_to_fwnode(np); |
| |
| /* |
| * Make sure GPIO 14 and 15 are NOT used as clocks but GPIO on |
| * specific machines. |
| */ |
| if (of_machine_is_compatible("dlink,dsm-g600-a") || |
| of_machine_is_compatible("iom,nas-100d")) |
| __raw_writel(0x0, g->base + IXP4XX_REG_GPCLK); |
| |
| /* |
| * This is a very special big-endian ARM issue: when the IXP4xx is |
| * run in big endian mode, all registers in the machine are switched |
| * around to the CPU-native endianness. As you see mostly in the |
| * driver we use __raw_readl()/__raw_writel() to access the registers |
| * in the appropriate order. With the GPIO library we need to specify |
| * byte order explicitly, so this flag needs to be set when compiling |
| * for big endian. |
| */ |
| #if defined(CONFIG_CPU_BIG_ENDIAN) |
| flags = BGPIOF_BIG_ENDIAN_BYTE_ORDER; |
| #else |
| flags = 0; |
| #endif |
| |
| /* Populate and register gpio chip */ |
| ret = bgpio_init(&g->gc, dev, 4, |
| g->base + IXP4XX_REG_GPIN, |
| g->base + IXP4XX_REG_GPOUT, |
| NULL, |
| NULL, |
| g->base + IXP4XX_REG_GPOE, |
| flags); |
| if (ret) { |
| dev_err(dev, "unable to init generic GPIO\n"); |
| return ret; |
| } |
| g->gc.ngpio = 16; |
| g->gc.label = "IXP4XX_GPIO_CHIP"; |
| /* |
| * TODO: when we have migrated to device tree and all GPIOs |
| * are fetched using phandles, set this to -1 to get rid of |
| * the fixed gpiochip base. |
| */ |
| g->gc.base = 0; |
| g->gc.parent = &pdev->dev; |
| g->gc.owner = THIS_MODULE; |
| |
| girq = &g->gc.irq; |
| gpio_irq_chip_set_chip(girq, &ixp4xx_gpio_irqchip); |
| girq->fwnode = g->fwnode; |
| girq->parent_domain = parent; |
| girq->child_to_parent_hwirq = ixp4xx_gpio_child_to_parent_hwirq; |
| girq->handler = handle_bad_irq; |
| girq->default_type = IRQ_TYPE_NONE; |
| |
| ret = devm_gpiochip_add_data(dev, &g->gc, g); |
| if (ret) { |
| dev_err(dev, "failed to add SoC gpiochip\n"); |
| return ret; |
| } |
| |
| platform_set_drvdata(pdev, g); |
| dev_info(dev, "IXP4 GPIO registered\n"); |
| |
| return 0; |
| } |
| |
| static const struct of_device_id ixp4xx_gpio_of_match[] = { |
| { |
| .compatible = "intel,ixp4xx-gpio", |
| }, |
| {}, |
| }; |
| |
| |
| static struct platform_driver ixp4xx_gpio_driver = { |
| .driver = { |
| .name = "ixp4xx-gpio", |
| .of_match_table = ixp4xx_gpio_of_match, |
| }, |
| .probe = ixp4xx_gpio_probe, |
| }; |
| builtin_platform_driver(ixp4xx_gpio_driver); |