| // SPDX-License-Identifier: GPL-2.0-only |
| /* |
| * Amlogic Meson6, Meson8 and Meson8b eFuse Driver |
| * |
| * Copyright (c) 2017 Martin Blumenstingl <martin.blumenstingl@googlemail.com> |
| */ |
| |
| #include <linux/bitfield.h> |
| #include <linux/bitops.h> |
| #include <linux/clk.h> |
| #include <linux/delay.h> |
| #include <linux/io.h> |
| #include <linux/iopoll.h> |
| #include <linux/module.h> |
| #include <linux/nvmem-provider.h> |
| #include <linux/of.h> |
| #include <linux/platform_device.h> |
| #include <linux/sizes.h> |
| #include <linux/slab.h> |
| |
| #define MESON_MX_EFUSE_CNTL1 0x04 |
| #define MESON_MX_EFUSE_CNTL1_PD_ENABLE BIT(27) |
| #define MESON_MX_EFUSE_CNTL1_AUTO_RD_BUSY BIT(26) |
| #define MESON_MX_EFUSE_CNTL1_AUTO_RD_START BIT(25) |
| #define MESON_MX_EFUSE_CNTL1_AUTO_RD_ENABLE BIT(24) |
| #define MESON_MX_EFUSE_CNTL1_BYTE_WR_DATA GENMASK(23, 16) |
| #define MESON_MX_EFUSE_CNTL1_AUTO_WR_BUSY BIT(14) |
| #define MESON_MX_EFUSE_CNTL1_AUTO_WR_START BIT(13) |
| #define MESON_MX_EFUSE_CNTL1_AUTO_WR_ENABLE BIT(12) |
| #define MESON_MX_EFUSE_CNTL1_BYTE_ADDR_SET BIT(11) |
| #define MESON_MX_EFUSE_CNTL1_BYTE_ADDR_MASK GENMASK(10, 0) |
| |
| #define MESON_MX_EFUSE_CNTL2 0x08 |
| |
| #define MESON_MX_EFUSE_CNTL4 0x10 |
| #define MESON_MX_EFUSE_CNTL4_ENCRYPT_ENABLE BIT(10) |
| |
| struct meson_mx_efuse_platform_data { |
| const char *name; |
| unsigned int word_size; |
| }; |
| |
| struct meson_mx_efuse { |
| void __iomem *base; |
| struct clk *core_clk; |
| struct nvmem_device *nvmem; |
| struct nvmem_config config; |
| }; |
| |
| static void meson_mx_efuse_mask_bits(struct meson_mx_efuse *efuse, u32 reg, |
| u32 mask, u32 set) |
| { |
| u32 data; |
| |
| data = readl(efuse->base + reg); |
| data &= ~mask; |
| data |= (set & mask); |
| |
| writel(data, efuse->base + reg); |
| } |
| |
| static int meson_mx_efuse_hw_enable(struct meson_mx_efuse *efuse) |
| { |
| int err; |
| |
| err = clk_prepare_enable(efuse->core_clk); |
| if (err) |
| return err; |
| |
| /* power up the efuse */ |
| meson_mx_efuse_mask_bits(efuse, MESON_MX_EFUSE_CNTL1, |
| MESON_MX_EFUSE_CNTL1_PD_ENABLE, 0); |
| |
| meson_mx_efuse_mask_bits(efuse, MESON_MX_EFUSE_CNTL4, |
| MESON_MX_EFUSE_CNTL4_ENCRYPT_ENABLE, 0); |
| |
| return 0; |
| } |
| |
| static void meson_mx_efuse_hw_disable(struct meson_mx_efuse *efuse) |
| { |
| meson_mx_efuse_mask_bits(efuse, MESON_MX_EFUSE_CNTL1, |
| MESON_MX_EFUSE_CNTL1_PD_ENABLE, |
| MESON_MX_EFUSE_CNTL1_PD_ENABLE); |
| |
| clk_disable_unprepare(efuse->core_clk); |
| } |
| |
| static int meson_mx_efuse_read_addr(struct meson_mx_efuse *efuse, |
| unsigned int addr, u32 *value) |
| { |
| int err; |
| u32 regval; |
| |
| /* write the address to read */ |
| regval = FIELD_PREP(MESON_MX_EFUSE_CNTL1_BYTE_ADDR_MASK, addr); |
| meson_mx_efuse_mask_bits(efuse, MESON_MX_EFUSE_CNTL1, |
| MESON_MX_EFUSE_CNTL1_BYTE_ADDR_MASK, regval); |
| |
| /* inform the hardware that we changed the address */ |
| meson_mx_efuse_mask_bits(efuse, MESON_MX_EFUSE_CNTL1, |
| MESON_MX_EFUSE_CNTL1_BYTE_ADDR_SET, |
| MESON_MX_EFUSE_CNTL1_BYTE_ADDR_SET); |
| meson_mx_efuse_mask_bits(efuse, MESON_MX_EFUSE_CNTL1, |
| MESON_MX_EFUSE_CNTL1_BYTE_ADDR_SET, 0); |
| |
| /* start the read process */ |
| meson_mx_efuse_mask_bits(efuse, MESON_MX_EFUSE_CNTL1, |
| MESON_MX_EFUSE_CNTL1_AUTO_RD_START, |
| MESON_MX_EFUSE_CNTL1_AUTO_RD_START); |
| meson_mx_efuse_mask_bits(efuse, MESON_MX_EFUSE_CNTL1, |
| MESON_MX_EFUSE_CNTL1_AUTO_RD_START, 0); |
| |
| /* |
| * perform a dummy read to ensure that the HW has the RD_BUSY bit set |
| * when polling for the status below. |
| */ |
| readl(efuse->base + MESON_MX_EFUSE_CNTL1); |
| |
| err = readl_poll_timeout_atomic(efuse->base + MESON_MX_EFUSE_CNTL1, |
| regval, |
| (!(regval & MESON_MX_EFUSE_CNTL1_AUTO_RD_BUSY)), |
| 1, 1000); |
| if (err) { |
| dev_err(efuse->config.dev, |
| "Timeout while reading efuse address %u\n", addr); |
| return err; |
| } |
| |
| *value = readl(efuse->base + MESON_MX_EFUSE_CNTL2); |
| |
| return 0; |
| } |
| |
| static int meson_mx_efuse_read(void *context, unsigned int offset, |
| void *buf, size_t bytes) |
| { |
| struct meson_mx_efuse *efuse = context; |
| u32 tmp; |
| int err, i, addr; |
| |
| err = meson_mx_efuse_hw_enable(efuse); |
| if (err) |
| return err; |
| |
| meson_mx_efuse_mask_bits(efuse, MESON_MX_EFUSE_CNTL1, |
| MESON_MX_EFUSE_CNTL1_AUTO_RD_ENABLE, |
| MESON_MX_EFUSE_CNTL1_AUTO_RD_ENABLE); |
| |
| for (i = 0; i < bytes; i += efuse->config.word_size) { |
| addr = (offset + i) / efuse->config.word_size; |
| |
| err = meson_mx_efuse_read_addr(efuse, addr, &tmp); |
| if (err) |
| break; |
| |
| memcpy(buf + i, &tmp, |
| min_t(size_t, bytes - i, efuse->config.word_size)); |
| } |
| |
| meson_mx_efuse_mask_bits(efuse, MESON_MX_EFUSE_CNTL1, |
| MESON_MX_EFUSE_CNTL1_AUTO_RD_ENABLE, 0); |
| |
| meson_mx_efuse_hw_disable(efuse); |
| |
| return err; |
| } |
| |
| static const struct meson_mx_efuse_platform_data meson6_efuse_data = { |
| .name = "meson6-efuse", |
| .word_size = 1, |
| }; |
| |
| static const struct meson_mx_efuse_platform_data meson8_efuse_data = { |
| .name = "meson8-efuse", |
| .word_size = 4, |
| }; |
| |
| static const struct meson_mx_efuse_platform_data meson8b_efuse_data = { |
| .name = "meson8b-efuse", |
| .word_size = 4, |
| }; |
| |
| static const struct of_device_id meson_mx_efuse_match[] = { |
| { .compatible = "amlogic,meson6-efuse", .data = &meson6_efuse_data }, |
| { .compatible = "amlogic,meson8-efuse", .data = &meson8_efuse_data }, |
| { .compatible = "amlogic,meson8b-efuse", .data = &meson8b_efuse_data }, |
| { /* sentinel */ }, |
| }; |
| MODULE_DEVICE_TABLE(of, meson_mx_efuse_match); |
| |
| static int meson_mx_efuse_probe(struct platform_device *pdev) |
| { |
| const struct meson_mx_efuse_platform_data *drvdata; |
| struct meson_mx_efuse *efuse; |
| |
| drvdata = of_device_get_match_data(&pdev->dev); |
| if (!drvdata) |
| return -EINVAL; |
| |
| efuse = devm_kzalloc(&pdev->dev, sizeof(*efuse), GFP_KERNEL); |
| if (!efuse) |
| return -ENOMEM; |
| |
| efuse->base = devm_platform_ioremap_resource(pdev, 0); |
| if (IS_ERR(efuse->base)) |
| return PTR_ERR(efuse->base); |
| |
| efuse->config.name = drvdata->name; |
| efuse->config.owner = THIS_MODULE; |
| efuse->config.dev = &pdev->dev; |
| efuse->config.priv = efuse; |
| efuse->config.stride = drvdata->word_size; |
| efuse->config.word_size = drvdata->word_size; |
| efuse->config.size = SZ_512; |
| efuse->config.read_only = true; |
| efuse->config.reg_read = meson_mx_efuse_read; |
| |
| efuse->core_clk = devm_clk_get(&pdev->dev, "core"); |
| if (IS_ERR(efuse->core_clk)) { |
| dev_err(&pdev->dev, "Failed to get core clock\n"); |
| return PTR_ERR(efuse->core_clk); |
| } |
| |
| efuse->nvmem = devm_nvmem_register(&pdev->dev, &efuse->config); |
| |
| return PTR_ERR_OR_ZERO(efuse->nvmem); |
| } |
| |
| static struct platform_driver meson_mx_efuse_driver = { |
| .probe = meson_mx_efuse_probe, |
| .driver = { |
| .name = "meson-mx-efuse", |
| .of_match_table = meson_mx_efuse_match, |
| }, |
| }; |
| |
| module_platform_driver(meson_mx_efuse_driver); |
| |
| MODULE_AUTHOR("Martin Blumenstingl <martin.blumenstingl@googlemail.com>"); |
| MODULE_DESCRIPTION("Amlogic Meson MX eFuse NVMEM driver"); |
| MODULE_LICENSE("GPL v2"); |