| // SPDX-License-Identifier: GPL-2.0 |
| /* |
| * phy-can-transceiver.c - phy driver for CAN transceivers |
| * |
| * Copyright (C) 2021 Texas Instruments Incorporated - https://www.ti.com |
| * |
| */ |
| #include <linux/of.h> |
| #include<linux/phy/phy.h> |
| #include<linux/platform_device.h> |
| #include<linux/module.h> |
| #include<linux/gpio.h> |
| #include<linux/gpio/consumer.h> |
| #include <linux/mux/consumer.h> |
| |
| struct can_transceiver_data { |
| u32 flags; |
| #define CAN_TRANSCEIVER_STB_PRESENT BIT(0) |
| #define CAN_TRANSCEIVER_EN_PRESENT BIT(1) |
| }; |
| |
| struct can_transceiver_phy { |
| struct phy *generic_phy; |
| struct gpio_desc *standby_gpio; |
| struct gpio_desc *enable_gpio; |
| struct mux_state *mux_state; |
| }; |
| |
| /* Power on function */ |
| static int can_transceiver_phy_power_on(struct phy *phy) |
| { |
| struct can_transceiver_phy *can_transceiver_phy = phy_get_drvdata(phy); |
| int ret; |
| |
| if (can_transceiver_phy->mux_state) { |
| ret = mux_state_select(can_transceiver_phy->mux_state); |
| if (ret) { |
| dev_err(&phy->dev, "Failed to select CAN mux: %d\n", ret); |
| return ret; |
| } |
| } |
| if (can_transceiver_phy->standby_gpio) |
| gpiod_set_value_cansleep(can_transceiver_phy->standby_gpio, 0); |
| if (can_transceiver_phy->enable_gpio) |
| gpiod_set_value_cansleep(can_transceiver_phy->enable_gpio, 1); |
| |
| return 0; |
| } |
| |
| /* Power off function */ |
| static int can_transceiver_phy_power_off(struct phy *phy) |
| { |
| struct can_transceiver_phy *can_transceiver_phy = phy_get_drvdata(phy); |
| |
| if (can_transceiver_phy->standby_gpio) |
| gpiod_set_value_cansleep(can_transceiver_phy->standby_gpio, 1); |
| if (can_transceiver_phy->enable_gpio) |
| gpiod_set_value_cansleep(can_transceiver_phy->enable_gpio, 0); |
| if (can_transceiver_phy->mux_state) |
| mux_state_deselect(can_transceiver_phy->mux_state); |
| |
| return 0; |
| } |
| |
| static const struct phy_ops can_transceiver_phy_ops = { |
| .power_on = can_transceiver_phy_power_on, |
| .power_off = can_transceiver_phy_power_off, |
| .owner = THIS_MODULE, |
| }; |
| |
| static const struct can_transceiver_data tcan1042_drvdata = { |
| .flags = CAN_TRANSCEIVER_STB_PRESENT, |
| }; |
| |
| static const struct can_transceiver_data tcan1043_drvdata = { |
| .flags = CAN_TRANSCEIVER_STB_PRESENT | CAN_TRANSCEIVER_EN_PRESENT, |
| }; |
| |
| static const struct of_device_id can_transceiver_phy_ids[] = { |
| { |
| .compatible = "ti,tcan1042", |
| .data = &tcan1042_drvdata |
| }, |
| { |
| .compatible = "ti,tcan1043", |
| .data = &tcan1043_drvdata |
| }, |
| { |
| .compatible = "nxp,tjr1443", |
| .data = &tcan1043_drvdata |
| }, |
| { } |
| }; |
| MODULE_DEVICE_TABLE(of, can_transceiver_phy_ids); |
| |
| static int can_transceiver_phy_probe(struct platform_device *pdev) |
| { |
| struct phy_provider *phy_provider; |
| struct device *dev = &pdev->dev; |
| struct can_transceiver_phy *can_transceiver_phy; |
| const struct can_transceiver_data *drvdata; |
| const struct of_device_id *match; |
| struct phy *phy; |
| struct gpio_desc *standby_gpio; |
| struct gpio_desc *enable_gpio; |
| u32 max_bitrate = 0; |
| int err; |
| |
| can_transceiver_phy = devm_kzalloc(dev, sizeof(struct can_transceiver_phy), GFP_KERNEL); |
| if (!can_transceiver_phy) |
| return -ENOMEM; |
| |
| match = of_match_node(can_transceiver_phy_ids, pdev->dev.of_node); |
| drvdata = match->data; |
| |
| if (of_property_read_bool(dev->of_node, "mux-states")) { |
| struct mux_state *mux_state; |
| |
| mux_state = devm_mux_state_get(dev, NULL); |
| if (IS_ERR(mux_state)) |
| return dev_err_probe(&pdev->dev, PTR_ERR(mux_state), |
| "failed to get mux\n"); |
| can_transceiver_phy->mux_state = mux_state; |
| } |
| |
| phy = devm_phy_create(dev, dev->of_node, |
| &can_transceiver_phy_ops); |
| if (IS_ERR(phy)) { |
| dev_err(dev, "failed to create can transceiver phy\n"); |
| return PTR_ERR(phy); |
| } |
| |
| err = device_property_read_u32(dev, "max-bitrate", &max_bitrate); |
| if ((err != -EINVAL) && !max_bitrate) |
| dev_warn(dev, "Invalid value for transceiver max bitrate. Ignoring bitrate limit\n"); |
| phy->attrs.max_link_rate = max_bitrate; |
| |
| can_transceiver_phy->generic_phy = phy; |
| |
| if (drvdata->flags & CAN_TRANSCEIVER_STB_PRESENT) { |
| standby_gpio = devm_gpiod_get_optional(dev, "standby", GPIOD_OUT_HIGH); |
| if (IS_ERR(standby_gpio)) |
| return PTR_ERR(standby_gpio); |
| can_transceiver_phy->standby_gpio = standby_gpio; |
| } |
| |
| if (drvdata->flags & CAN_TRANSCEIVER_EN_PRESENT) { |
| enable_gpio = devm_gpiod_get_optional(dev, "enable", GPIOD_OUT_LOW); |
| if (IS_ERR(enable_gpio)) |
| return PTR_ERR(enable_gpio); |
| can_transceiver_phy->enable_gpio = enable_gpio; |
| } |
| |
| phy_set_drvdata(can_transceiver_phy->generic_phy, can_transceiver_phy); |
| |
| phy_provider = devm_of_phy_provider_register(dev, of_phy_simple_xlate); |
| |
| return PTR_ERR_OR_ZERO(phy_provider); |
| } |
| |
| static struct platform_driver can_transceiver_phy_driver = { |
| .probe = can_transceiver_phy_probe, |
| .driver = { |
| .name = "can-transceiver-phy", |
| .of_match_table = can_transceiver_phy_ids, |
| }, |
| }; |
| |
| module_platform_driver(can_transceiver_phy_driver); |
| |
| MODULE_AUTHOR("Faiz Abbas <faiz_abbas@ti.com>"); |
| MODULE_AUTHOR("Aswath Govindraju <a-govindraju@ti.com>"); |
| MODULE_DESCRIPTION("CAN TRANSCEIVER PHY driver"); |
| MODULE_LICENSE("GPL v2"); |