| // SPDX-License-Identifier: GPL-2.0 |
| /* |
| * DIAGNOSE X'2C4' instruction based HMC FTP services, useable on z/VM |
| * |
| * Copyright IBM Corp. 2013 |
| * Author(s): Ralf Hoppe (rhoppe@de.ibm.com) |
| * |
| */ |
| |
| #define KMSG_COMPONENT "hmcdrv" |
| #define pr_fmt(fmt) KMSG_COMPONENT ": " fmt |
| |
| #include <linux/kernel.h> |
| #include <linux/mm.h> |
| #include <linux/irq.h> |
| #include <linux/wait.h> |
| #include <linux/string.h> |
| #include <asm/asm-extable.h> |
| #include <asm/ctl_reg.h> |
| #include <asm/diag.h> |
| |
| #include "hmcdrv_ftp.h" |
| #include "diag_ftp.h" |
| |
| /* DIAGNOSE X'2C4' return codes in Ry */ |
| #define DIAG_FTP_RET_OK 0 /* HMC FTP started successfully */ |
| #define DIAG_FTP_RET_EBUSY 4 /* HMC FTP service currently busy */ |
| #define DIAG_FTP_RET_EIO 8 /* HMC FTP service I/O error */ |
| /* and an artificial extension */ |
| #define DIAG_FTP_RET_EPERM 2 /* HMC FTP service privilege error */ |
| |
| /* FTP service status codes (after INTR at guest real location 133) */ |
| #define DIAG_FTP_STAT_OK 0U /* request completed successfully */ |
| #define DIAG_FTP_STAT_PGCC 4U /* program check condition */ |
| #define DIAG_FTP_STAT_PGIOE 8U /* paging I/O error */ |
| #define DIAG_FTP_STAT_TIMEOUT 12U /* timeout */ |
| #define DIAG_FTP_STAT_EBASE 16U /* base of error codes from SCLP */ |
| #define DIAG_FTP_STAT_LDFAIL (DIAG_FTP_STAT_EBASE + 1U) /* failed */ |
| #define DIAG_FTP_STAT_LDNPERM (DIAG_FTP_STAT_EBASE + 2U) /* not allowed */ |
| #define DIAG_FTP_STAT_LDRUNS (DIAG_FTP_STAT_EBASE + 3U) /* runs */ |
| #define DIAG_FTP_STAT_LDNRUNS (DIAG_FTP_STAT_EBASE + 4U) /* not runs */ |
| |
| /** |
| * struct diag_ftp_ldfpl - load file FTP parameter list (LDFPL) |
| * @bufaddr: real buffer address (at 4k boundary) |
| * @buflen: length of buffer |
| * @offset: dir/file offset |
| * @intparm: interruption parameter (unused) |
| * @transferred: bytes transferred |
| * @fsize: file size, filled on GET |
| * @failaddr: failing address |
| * @spare: padding |
| * @fident: file name - ASCII |
| */ |
| struct diag_ftp_ldfpl { |
| u64 bufaddr; |
| u64 buflen; |
| u64 offset; |
| u64 intparm; |
| u64 transferred; |
| u64 fsize; |
| u64 failaddr; |
| u64 spare; |
| u8 fident[HMCDRV_FTP_FIDENT_MAX]; |
| } __packed; |
| |
| static DECLARE_COMPLETION(diag_ftp_rx_complete); |
| static int diag_ftp_subcode; |
| |
| /** |
| * diag_ftp_handler() - FTP services IRQ handler |
| * @extirq: external interrupt (sub-) code |
| * @param32: 32-bit interruption parameter from &struct diag_ftp_ldfpl |
| * @param64: unused (for 64-bit interrupt parameters) |
| */ |
| static void diag_ftp_handler(struct ext_code extirq, |
| unsigned int param32, |
| unsigned long param64) |
| { |
| if ((extirq.subcode >> 8) != 8) |
| return; /* not a FTP services sub-code */ |
| |
| inc_irq_stat(IRQEXT_FTP); |
| diag_ftp_subcode = extirq.subcode & 0xffU; |
| complete(&diag_ftp_rx_complete); |
| } |
| |
| /** |
| * diag_ftp_2c4() - DIAGNOSE X'2C4' service call |
| * @fpl: pointer to prepared LDFPL |
| * @cmd: FTP command to be executed |
| * |
| * Performs a DIAGNOSE X'2C4' call with (input/output) FTP parameter list |
| * @fpl and FTP function code @cmd. In case of an error the function does |
| * nothing and returns an (negative) error code. |
| * |
| * Notes: |
| * 1. This function only initiates a transfer, so the caller must wait |
| * for completion (asynchronous execution). |
| * 2. The FTP parameter list @fpl must be aligned to a double-word boundary. |
| * 3. fpl->bufaddr must be a real address, 4k aligned |
| */ |
| static int diag_ftp_2c4(struct diag_ftp_ldfpl *fpl, |
| enum hmcdrv_ftp_cmdid cmd) |
| { |
| int rc; |
| |
| diag_stat_inc(DIAG_STAT_X2C4); |
| asm volatile( |
| " diag %[addr],%[cmd],0x2c4\n" |
| "0: j 2f\n" |
| "1: la %[rc],%[err]\n" |
| "2:\n" |
| EX_TABLE(0b, 1b) |
| : [rc] "=d" (rc), "+m" (*fpl) |
| : [cmd] "0" (cmd), [addr] "d" (virt_to_phys(fpl)), |
| [err] "i" (DIAG_FTP_RET_EPERM) |
| : "cc"); |
| |
| switch (rc) { |
| case DIAG_FTP_RET_OK: |
| return 0; |
| case DIAG_FTP_RET_EBUSY: |
| return -EBUSY; |
| case DIAG_FTP_RET_EPERM: |
| return -EPERM; |
| case DIAG_FTP_RET_EIO: |
| default: |
| return -EIO; |
| } |
| } |
| |
| /** |
| * diag_ftp_cmd() - executes a DIAG X'2C4' FTP command, targeting a HMC |
| * @ftp: pointer to FTP command specification |
| * @fsize: return of file size (or NULL if undesirable) |
| * |
| * Attention: Notice that this function is not reentrant - so the caller |
| * must ensure locking. |
| * |
| * Return: number of bytes read/written or a (negative) error code |
| */ |
| ssize_t diag_ftp_cmd(const struct hmcdrv_ftp_cmdspec *ftp, size_t *fsize) |
| { |
| struct diag_ftp_ldfpl *ldfpl; |
| ssize_t len; |
| #ifdef DEBUG |
| unsigned long start_jiffies; |
| |
| pr_debug("starting DIAG X'2C4' on '%s', requesting %zd bytes\n", |
| ftp->fname, ftp->len); |
| start_jiffies = jiffies; |
| #endif |
| init_completion(&diag_ftp_rx_complete); |
| |
| ldfpl = (void *) get_zeroed_page(GFP_KERNEL | GFP_DMA); |
| if (!ldfpl) { |
| len = -ENOMEM; |
| goto out; |
| } |
| |
| len = strscpy(ldfpl->fident, ftp->fname, sizeof(ldfpl->fident)); |
| if (len < 0) { |
| len = -EINVAL; |
| goto out_free; |
| } |
| |
| ldfpl->transferred = 0; |
| ldfpl->fsize = 0; |
| ldfpl->offset = ftp->ofs; |
| ldfpl->buflen = ftp->len; |
| ldfpl->bufaddr = virt_to_phys(ftp->buf); |
| |
| len = diag_ftp_2c4(ldfpl, ftp->id); |
| if (len) |
| goto out_free; |
| |
| /* |
| * There is no way to cancel the running diag X'2C4', the code |
| * needs to wait unconditionally until the transfer is complete. |
| */ |
| wait_for_completion(&diag_ftp_rx_complete); |
| |
| #ifdef DEBUG |
| pr_debug("completed DIAG X'2C4' after %lu ms\n", |
| (jiffies - start_jiffies) * 1000 / HZ); |
| pr_debug("status of DIAG X'2C4' is %u, with %lld/%lld bytes\n", |
| diag_ftp_subcode, ldfpl->transferred, ldfpl->fsize); |
| #endif |
| |
| switch (diag_ftp_subcode) { |
| case DIAG_FTP_STAT_OK: /* success */ |
| len = ldfpl->transferred; |
| if (fsize) |
| *fsize = ldfpl->fsize; |
| break; |
| case DIAG_FTP_STAT_LDNPERM: |
| len = -EPERM; |
| break; |
| case DIAG_FTP_STAT_LDRUNS: |
| len = -EBUSY; |
| break; |
| case DIAG_FTP_STAT_LDFAIL: |
| len = -ENOENT; /* no such file or media */ |
| break; |
| default: |
| len = -EIO; |
| break; |
| } |
| |
| out_free: |
| free_page((unsigned long) ldfpl); |
| out: |
| return len; |
| } |
| |
| /** |
| * diag_ftp_startup() - startup of FTP services, when running on z/VM |
| * |
| * Return: 0 on success, else an (negative) error code |
| */ |
| int diag_ftp_startup(void) |
| { |
| int rc; |
| |
| rc = register_external_irq(EXT_IRQ_CP_SERVICE, diag_ftp_handler); |
| if (rc) |
| return rc; |
| |
| irq_subclass_register(IRQ_SUBCLASS_SERVICE_SIGNAL); |
| return 0; |
| } |
| |
| /** |
| * diag_ftp_shutdown() - shutdown of FTP services, when running on z/VM |
| */ |
| void diag_ftp_shutdown(void) |
| { |
| irq_subclass_unregister(IRQ_SUBCLASS_SERVICE_SIGNAL); |
| unregister_external_irq(EXT_IRQ_CP_SERVICE, diag_ftp_handler); |
| } |