| // SPDX-License-Identifier: GPL-2.0 OR BSD-3-Clause |
| /* |
| * Copyright (c) 2016-2018 Oracle. All rights reserved. |
| * Copyright (c) 2014 Open Grid Computing, Inc. All rights reserved. |
| * Copyright (c) 2005-2006 Network Appliance, Inc. All rights reserved. |
| * |
| * This software is available to you under a choice of one of two |
| * licenses. You may choose to be licensed under the terms of the GNU |
| * General Public License (GPL) Version 2, available from the file |
| * COPYING in the main directory of this source tree, or the BSD-type |
| * license below: |
| * |
| * Redistribution and use in source and binary forms, with or without |
| * modification, are permitted provided that the following conditions |
| * are met: |
| * |
| * Redistributions of source code must retain the above copyright |
| * notice, this list of conditions and the following disclaimer. |
| * |
| * Redistributions in binary form must reproduce the above |
| * copyright notice, this list of conditions and the following |
| * disclaimer in the documentation and/or other materials provided |
| * with the distribution. |
| * |
| * Neither the name of the Network Appliance, Inc. nor the names of |
| * its contributors may be used to endorse or promote products |
| * derived from this software without specific prior written |
| * permission. |
| * |
| * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS |
| * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT |
| * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR |
| * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT |
| * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, |
| * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT |
| * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, |
| * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY |
| * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT |
| * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE |
| * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. |
| * |
| * Author: Tom Tucker <tom@opengridcomputing.com> |
| */ |
| |
| /* Operation |
| * |
| * The main entry point is svc_rdma_sendto. This is called by the |
| * RPC server when an RPC Reply is ready to be transmitted to a client. |
| * |
| * The passed-in svc_rqst contains a struct xdr_buf which holds an |
| * XDR-encoded RPC Reply message. sendto must construct the RPC-over-RDMA |
| * transport header, post all Write WRs needed for this Reply, then post |
| * a Send WR conveying the transport header and the RPC message itself to |
| * the client. |
| * |
| * svc_rdma_sendto must fully transmit the Reply before returning, as |
| * the svc_rqst will be recycled as soon as sendto returns. Remaining |
| * resources referred to by the svc_rqst are also recycled at that time. |
| * Therefore any resources that must remain longer must be detached |
| * from the svc_rqst and released later. |
| * |
| * Page Management |
| * |
| * The I/O that performs Reply transmission is asynchronous, and may |
| * complete well after sendto returns. Thus pages under I/O must be |
| * removed from the svc_rqst before sendto returns. |
| * |
| * The logic here depends on Send Queue and completion ordering. Since |
| * the Send WR is always posted last, it will always complete last. Thus |
| * when it completes, it is guaranteed that all previous Write WRs have |
| * also completed. |
| * |
| * Write WRs are constructed and posted. Each Write segment gets its own |
| * svc_rdma_rw_ctxt, allowing the Write completion handler to find and |
| * DMA-unmap the pages under I/O for that Write segment. The Write |
| * completion handler does not release any pages. |
| * |
| * When the Send WR is constructed, it also gets its own svc_rdma_send_ctxt. |
| * The ownership of all of the Reply's pages are transferred into that |
| * ctxt, the Send WR is posted, and sendto returns. |
| * |
| * The svc_rdma_send_ctxt is presented when the Send WR completes. The |
| * Send completion handler finally releases the Reply's pages. |
| * |
| * This mechanism also assumes that completions on the transport's Send |
| * Completion Queue do not run in parallel. Otherwise a Write completion |
| * and Send completion running at the same time could release pages that |
| * are still DMA-mapped. |
| * |
| * Error Handling |
| * |
| * - If the Send WR is posted successfully, it will either complete |
| * successfully, or get flushed. Either way, the Send completion |
| * handler releases the Reply's pages. |
| * - If the Send WR cannot be not posted, the forward path releases |
| * the Reply's pages. |
| * |
| * This handles the case, without the use of page reference counting, |
| * where two different Write segments send portions of the same page. |
| */ |
| |
| #include <linux/spinlock.h> |
| #include <asm/unaligned.h> |
| |
| #include <rdma/ib_verbs.h> |
| #include <rdma/rdma_cm.h> |
| |
| #include <linux/sunrpc/debug.h> |
| #include <linux/sunrpc/svc_rdma.h> |
| |
| #include "xprt_rdma.h" |
| #include <trace/events/rpcrdma.h> |
| |
| static void svc_rdma_wc_send(struct ib_cq *cq, struct ib_wc *wc); |
| |
| static void svc_rdma_send_cid_init(struct svcxprt_rdma *rdma, |
| struct rpc_rdma_cid *cid) |
| { |
| cid->ci_queue_id = rdma->sc_sq_cq->res.id; |
| cid->ci_completion_id = atomic_inc_return(&rdma->sc_completion_ids); |
| } |
| |
| static struct svc_rdma_send_ctxt * |
| svc_rdma_send_ctxt_alloc(struct svcxprt_rdma *rdma) |
| { |
| int node = ibdev_to_node(rdma->sc_cm_id->device); |
| struct svc_rdma_send_ctxt *ctxt; |
| dma_addr_t addr; |
| void *buffer; |
| int i; |
| |
| ctxt = kmalloc_node(struct_size(ctxt, sc_sges, rdma->sc_max_send_sges), |
| GFP_KERNEL, node); |
| if (!ctxt) |
| goto fail0; |
| buffer = kmalloc_node(rdma->sc_max_req_size, GFP_KERNEL, node); |
| if (!buffer) |
| goto fail1; |
| addr = ib_dma_map_single(rdma->sc_pd->device, buffer, |
| rdma->sc_max_req_size, DMA_TO_DEVICE); |
| if (ib_dma_mapping_error(rdma->sc_pd->device, addr)) |
| goto fail2; |
| |
| svc_rdma_send_cid_init(rdma, &ctxt->sc_cid); |
| |
| ctxt->sc_send_wr.next = NULL; |
| ctxt->sc_send_wr.wr_cqe = &ctxt->sc_cqe; |
| ctxt->sc_send_wr.sg_list = ctxt->sc_sges; |
| ctxt->sc_send_wr.send_flags = IB_SEND_SIGNALED; |
| ctxt->sc_cqe.done = svc_rdma_wc_send; |
| ctxt->sc_xprt_buf = buffer; |
| xdr_buf_init(&ctxt->sc_hdrbuf, ctxt->sc_xprt_buf, |
| rdma->sc_max_req_size); |
| ctxt->sc_sges[0].addr = addr; |
| |
| for (i = 0; i < rdma->sc_max_send_sges; i++) |
| ctxt->sc_sges[i].lkey = rdma->sc_pd->local_dma_lkey; |
| return ctxt; |
| |
| fail2: |
| kfree(buffer); |
| fail1: |
| kfree(ctxt); |
| fail0: |
| return NULL; |
| } |
| |
| /** |
| * svc_rdma_send_ctxts_destroy - Release all send_ctxt's for an xprt |
| * @rdma: svcxprt_rdma being torn down |
| * |
| */ |
| void svc_rdma_send_ctxts_destroy(struct svcxprt_rdma *rdma) |
| { |
| struct svc_rdma_send_ctxt *ctxt; |
| struct llist_node *node; |
| |
| while ((node = llist_del_first(&rdma->sc_send_ctxts)) != NULL) { |
| ctxt = llist_entry(node, struct svc_rdma_send_ctxt, sc_node); |
| ib_dma_unmap_single(rdma->sc_pd->device, |
| ctxt->sc_sges[0].addr, |
| rdma->sc_max_req_size, |
| DMA_TO_DEVICE); |
| kfree(ctxt->sc_xprt_buf); |
| kfree(ctxt); |
| } |
| } |
| |
| /** |
| * svc_rdma_send_ctxt_get - Get a free send_ctxt |
| * @rdma: controlling svcxprt_rdma |
| * |
| * Returns a ready-to-use send_ctxt, or NULL if none are |
| * available and a fresh one cannot be allocated. |
| */ |
| struct svc_rdma_send_ctxt *svc_rdma_send_ctxt_get(struct svcxprt_rdma *rdma) |
| { |
| struct svc_rdma_send_ctxt *ctxt; |
| struct llist_node *node; |
| |
| spin_lock(&rdma->sc_send_lock); |
| node = llist_del_first(&rdma->sc_send_ctxts); |
| if (!node) |
| goto out_empty; |
| ctxt = llist_entry(node, struct svc_rdma_send_ctxt, sc_node); |
| spin_unlock(&rdma->sc_send_lock); |
| |
| out: |
| rpcrdma_set_xdrlen(&ctxt->sc_hdrbuf, 0); |
| xdr_init_encode(&ctxt->sc_stream, &ctxt->sc_hdrbuf, |
| ctxt->sc_xprt_buf, NULL); |
| |
| ctxt->sc_send_wr.num_sge = 0; |
| ctxt->sc_cur_sge_no = 0; |
| ctxt->sc_page_count = 0; |
| return ctxt; |
| |
| out_empty: |
| spin_unlock(&rdma->sc_send_lock); |
| ctxt = svc_rdma_send_ctxt_alloc(rdma); |
| if (!ctxt) |
| return NULL; |
| goto out; |
| } |
| |
| /** |
| * svc_rdma_send_ctxt_put - Return send_ctxt to free list |
| * @rdma: controlling svcxprt_rdma |
| * @ctxt: object to return to the free list |
| * |
| * Pages left in sc_pages are DMA unmapped and released. |
| */ |
| void svc_rdma_send_ctxt_put(struct svcxprt_rdma *rdma, |
| struct svc_rdma_send_ctxt *ctxt) |
| { |
| struct ib_device *device = rdma->sc_cm_id->device; |
| unsigned int i; |
| |
| if (ctxt->sc_page_count) |
| release_pages(ctxt->sc_pages, ctxt->sc_page_count); |
| |
| /* The first SGE contains the transport header, which |
| * remains mapped until @ctxt is destroyed. |
| */ |
| for (i = 1; i < ctxt->sc_send_wr.num_sge; i++) { |
| ib_dma_unmap_page(device, |
| ctxt->sc_sges[i].addr, |
| ctxt->sc_sges[i].length, |
| DMA_TO_DEVICE); |
| trace_svcrdma_dma_unmap_page(rdma, |
| ctxt->sc_sges[i].addr, |
| ctxt->sc_sges[i].length); |
| } |
| |
| llist_add(&ctxt->sc_node, &rdma->sc_send_ctxts); |
| } |
| |
| /** |
| * svc_rdma_wake_send_waiters - manage Send Queue accounting |
| * @rdma: controlling transport |
| * @avail: Number of additional SQEs that are now available |
| * |
| */ |
| void svc_rdma_wake_send_waiters(struct svcxprt_rdma *rdma, int avail) |
| { |
| atomic_add(avail, &rdma->sc_sq_avail); |
| smp_mb__after_atomic(); |
| if (unlikely(waitqueue_active(&rdma->sc_send_wait))) |
| wake_up(&rdma->sc_send_wait); |
| } |
| |
| /** |
| * svc_rdma_wc_send - Invoked by RDMA provider for each polled Send WC |
| * @cq: Completion Queue context |
| * @wc: Work Completion object |
| * |
| * NB: The svc_xprt/svcxprt_rdma is pinned whenever it's possible that |
| * the Send completion handler could be running. |
| */ |
| static void svc_rdma_wc_send(struct ib_cq *cq, struct ib_wc *wc) |
| { |
| struct svcxprt_rdma *rdma = cq->cq_context; |
| struct ib_cqe *cqe = wc->wr_cqe; |
| struct svc_rdma_send_ctxt *ctxt = |
| container_of(cqe, struct svc_rdma_send_ctxt, sc_cqe); |
| |
| svc_rdma_wake_send_waiters(rdma, 1); |
| |
| if (unlikely(wc->status != IB_WC_SUCCESS)) |
| goto flushed; |
| |
| trace_svcrdma_wc_send(wc, &ctxt->sc_cid); |
| svc_rdma_send_ctxt_put(rdma, ctxt); |
| return; |
| |
| flushed: |
| if (wc->status != IB_WC_WR_FLUSH_ERR) |
| trace_svcrdma_wc_send_err(wc, &ctxt->sc_cid); |
| else |
| trace_svcrdma_wc_send_flush(wc, &ctxt->sc_cid); |
| svc_rdma_send_ctxt_put(rdma, ctxt); |
| svc_xprt_deferred_close(&rdma->sc_xprt); |
| } |
| |
| /** |
| * svc_rdma_send - Post a single Send WR |
| * @rdma: transport on which to post the WR |
| * @ctxt: send ctxt with a Send WR ready to post |
| * |
| * Returns zero if the Send WR was posted successfully. Otherwise, a |
| * negative errno is returned. |
| */ |
| int svc_rdma_send(struct svcxprt_rdma *rdma, struct svc_rdma_send_ctxt *ctxt) |
| { |
| struct ib_send_wr *wr = &ctxt->sc_send_wr; |
| int ret; |
| |
| might_sleep(); |
| |
| /* Sync the transport header buffer */ |
| ib_dma_sync_single_for_device(rdma->sc_pd->device, |
| wr->sg_list[0].addr, |
| wr->sg_list[0].length, |
| DMA_TO_DEVICE); |
| |
| /* If the SQ is full, wait until an SQ entry is available */ |
| while (1) { |
| if ((atomic_dec_return(&rdma->sc_sq_avail) < 0)) { |
| percpu_counter_inc(&svcrdma_stat_sq_starve); |
| trace_svcrdma_sq_full(rdma); |
| atomic_inc(&rdma->sc_sq_avail); |
| wait_event(rdma->sc_send_wait, |
| atomic_read(&rdma->sc_sq_avail) > 1); |
| if (test_bit(XPT_CLOSE, &rdma->sc_xprt.xpt_flags)) |
| return -ENOTCONN; |
| trace_svcrdma_sq_retry(rdma); |
| continue; |
| } |
| |
| trace_svcrdma_post_send(ctxt); |
| ret = ib_post_send(rdma->sc_qp, wr, NULL); |
| if (ret) |
| break; |
| return 0; |
| } |
| |
| trace_svcrdma_sq_post_err(rdma, ret); |
| svc_xprt_deferred_close(&rdma->sc_xprt); |
| wake_up(&rdma->sc_send_wait); |
| return ret; |
| } |
| |
| /** |
| * svc_rdma_encode_read_list - Encode RPC Reply's Read chunk list |
| * @sctxt: Send context for the RPC Reply |
| * |
| * Return values: |
| * On success, returns length in bytes of the Reply XDR buffer |
| * that was consumed by the Reply Read list |
| * %-EMSGSIZE on XDR buffer overflow |
| */ |
| static ssize_t svc_rdma_encode_read_list(struct svc_rdma_send_ctxt *sctxt) |
| { |
| /* RPC-over-RDMA version 1 replies never have a Read list. */ |
| return xdr_stream_encode_item_absent(&sctxt->sc_stream); |
| } |
| |
| /** |
| * svc_rdma_encode_write_segment - Encode one Write segment |
| * @sctxt: Send context for the RPC Reply |
| * @chunk: Write chunk to push |
| * @remaining: remaining bytes of the payload left in the Write chunk |
| * @segno: which segment in the chunk |
| * |
| * Return values: |
| * On success, returns length in bytes of the Reply XDR buffer |
| * that was consumed by the Write segment, and updates @remaining |
| * %-EMSGSIZE on XDR buffer overflow |
| */ |
| static ssize_t svc_rdma_encode_write_segment(struct svc_rdma_send_ctxt *sctxt, |
| const struct svc_rdma_chunk *chunk, |
| u32 *remaining, unsigned int segno) |
| { |
| const struct svc_rdma_segment *segment = &chunk->ch_segments[segno]; |
| const size_t len = rpcrdma_segment_maxsz * sizeof(__be32); |
| u32 length; |
| __be32 *p; |
| |
| p = xdr_reserve_space(&sctxt->sc_stream, len); |
| if (!p) |
| return -EMSGSIZE; |
| |
| length = min_t(u32, *remaining, segment->rs_length); |
| *remaining -= length; |
| xdr_encode_rdma_segment(p, segment->rs_handle, length, |
| segment->rs_offset); |
| trace_svcrdma_encode_wseg(sctxt, segno, segment->rs_handle, length, |
| segment->rs_offset); |
| return len; |
| } |
| |
| /** |
| * svc_rdma_encode_write_chunk - Encode one Write chunk |
| * @sctxt: Send context for the RPC Reply |
| * @chunk: Write chunk to push |
| * |
| * Copy a Write chunk from the Call transport header to the |
| * Reply transport header. Update each segment's length field |
| * to reflect the number of bytes written in that segment. |
| * |
| * Return values: |
| * On success, returns length in bytes of the Reply XDR buffer |
| * that was consumed by the Write chunk |
| * %-EMSGSIZE on XDR buffer overflow |
| */ |
| static ssize_t svc_rdma_encode_write_chunk(struct svc_rdma_send_ctxt *sctxt, |
| const struct svc_rdma_chunk *chunk) |
| { |
| u32 remaining = chunk->ch_payload_length; |
| unsigned int segno; |
| ssize_t len, ret; |
| |
| len = 0; |
| ret = xdr_stream_encode_item_present(&sctxt->sc_stream); |
| if (ret < 0) |
| return ret; |
| len += ret; |
| |
| ret = xdr_stream_encode_u32(&sctxt->sc_stream, chunk->ch_segcount); |
| if (ret < 0) |
| return ret; |
| len += ret; |
| |
| for (segno = 0; segno < chunk->ch_segcount; segno++) { |
| ret = svc_rdma_encode_write_segment(sctxt, chunk, &remaining, segno); |
| if (ret < 0) |
| return ret; |
| len += ret; |
| } |
| |
| return len; |
| } |
| |
| /** |
| * svc_rdma_encode_write_list - Encode RPC Reply's Write chunk list |
| * @rctxt: Reply context with information about the RPC Call |
| * @sctxt: Send context for the RPC Reply |
| * |
| * Return values: |
| * On success, returns length in bytes of the Reply XDR buffer |
| * that was consumed by the Reply's Write list |
| * %-EMSGSIZE on XDR buffer overflow |
| */ |
| static ssize_t svc_rdma_encode_write_list(struct svc_rdma_recv_ctxt *rctxt, |
| struct svc_rdma_send_ctxt *sctxt) |
| { |
| struct svc_rdma_chunk *chunk; |
| ssize_t len, ret; |
| |
| len = 0; |
| pcl_for_each_chunk(chunk, &rctxt->rc_write_pcl) { |
| ret = svc_rdma_encode_write_chunk(sctxt, chunk); |
| if (ret < 0) |
| return ret; |
| len += ret; |
| } |
| |
| /* Terminate the Write list */ |
| ret = xdr_stream_encode_item_absent(&sctxt->sc_stream); |
| if (ret < 0) |
| return ret; |
| |
| return len + ret; |
| } |
| |
| /** |
| * svc_rdma_encode_reply_chunk - Encode RPC Reply's Reply chunk |
| * @rctxt: Reply context with information about the RPC Call |
| * @sctxt: Send context for the RPC Reply |
| * @length: size in bytes of the payload in the Reply chunk |
| * |
| * Return values: |
| * On success, returns length in bytes of the Reply XDR buffer |
| * that was consumed by the Reply's Reply chunk |
| * %-EMSGSIZE on XDR buffer overflow |
| * %-E2BIG if the RPC message is larger than the Reply chunk |
| */ |
| static ssize_t |
| svc_rdma_encode_reply_chunk(struct svc_rdma_recv_ctxt *rctxt, |
| struct svc_rdma_send_ctxt *sctxt, |
| unsigned int length) |
| { |
| struct svc_rdma_chunk *chunk; |
| |
| if (pcl_is_empty(&rctxt->rc_reply_pcl)) |
| return xdr_stream_encode_item_absent(&sctxt->sc_stream); |
| |
| chunk = pcl_first_chunk(&rctxt->rc_reply_pcl); |
| if (length > chunk->ch_length) |
| return -E2BIG; |
| |
| chunk->ch_payload_length = length; |
| return svc_rdma_encode_write_chunk(sctxt, chunk); |
| } |
| |
| struct svc_rdma_map_data { |
| struct svcxprt_rdma *md_rdma; |
| struct svc_rdma_send_ctxt *md_ctxt; |
| }; |
| |
| /** |
| * svc_rdma_page_dma_map - DMA map one page |
| * @data: pointer to arguments |
| * @page: struct page to DMA map |
| * @offset: offset into the page |
| * @len: number of bytes to map |
| * |
| * Returns: |
| * %0 if DMA mapping was successful |
| * %-EIO if the page cannot be DMA mapped |
| */ |
| static int svc_rdma_page_dma_map(void *data, struct page *page, |
| unsigned long offset, unsigned int len) |
| { |
| struct svc_rdma_map_data *args = data; |
| struct svcxprt_rdma *rdma = args->md_rdma; |
| struct svc_rdma_send_ctxt *ctxt = args->md_ctxt; |
| struct ib_device *dev = rdma->sc_cm_id->device; |
| dma_addr_t dma_addr; |
| |
| ++ctxt->sc_cur_sge_no; |
| |
| dma_addr = ib_dma_map_page(dev, page, offset, len, DMA_TO_DEVICE); |
| if (ib_dma_mapping_error(dev, dma_addr)) |
| goto out_maperr; |
| |
| trace_svcrdma_dma_map_page(rdma, dma_addr, len); |
| ctxt->sc_sges[ctxt->sc_cur_sge_no].addr = dma_addr; |
| ctxt->sc_sges[ctxt->sc_cur_sge_no].length = len; |
| ctxt->sc_send_wr.num_sge++; |
| return 0; |
| |
| out_maperr: |
| trace_svcrdma_dma_map_err(rdma, dma_addr, len); |
| return -EIO; |
| } |
| |
| /** |
| * svc_rdma_iov_dma_map - DMA map an iovec |
| * @data: pointer to arguments |
| * @iov: kvec to DMA map |
| * |
| * ib_dma_map_page() is used here because svc_rdma_dma_unmap() |
| * handles DMA-unmap and it uses ib_dma_unmap_page() exclusively. |
| * |
| * Returns: |
| * %0 if DMA mapping was successful |
| * %-EIO if the iovec cannot be DMA mapped |
| */ |
| static int svc_rdma_iov_dma_map(void *data, const struct kvec *iov) |
| { |
| if (!iov->iov_len) |
| return 0; |
| return svc_rdma_page_dma_map(data, virt_to_page(iov->iov_base), |
| offset_in_page(iov->iov_base), |
| iov->iov_len); |
| } |
| |
| /** |
| * svc_rdma_xb_dma_map - DMA map all segments of an xdr_buf |
| * @xdr: xdr_buf containing portion of an RPC message to transmit |
| * @data: pointer to arguments |
| * |
| * Returns: |
| * %0 if DMA mapping was successful |
| * %-EIO if DMA mapping failed |
| * |
| * On failure, any DMA mappings that have been already done must be |
| * unmapped by the caller. |
| */ |
| static int svc_rdma_xb_dma_map(const struct xdr_buf *xdr, void *data) |
| { |
| unsigned int len, remaining; |
| unsigned long pageoff; |
| struct page **ppages; |
| int ret; |
| |
| ret = svc_rdma_iov_dma_map(data, &xdr->head[0]); |
| if (ret < 0) |
| return ret; |
| |
| ppages = xdr->pages + (xdr->page_base >> PAGE_SHIFT); |
| pageoff = offset_in_page(xdr->page_base); |
| remaining = xdr->page_len; |
| while (remaining) { |
| len = min_t(u32, PAGE_SIZE - pageoff, remaining); |
| |
| ret = svc_rdma_page_dma_map(data, *ppages++, pageoff, len); |
| if (ret < 0) |
| return ret; |
| |
| remaining -= len; |
| pageoff = 0; |
| } |
| |
| ret = svc_rdma_iov_dma_map(data, &xdr->tail[0]); |
| if (ret < 0) |
| return ret; |
| |
| return xdr->len; |
| } |
| |
| struct svc_rdma_pullup_data { |
| u8 *pd_dest; |
| unsigned int pd_length; |
| unsigned int pd_num_sges; |
| }; |
| |
| /** |
| * svc_rdma_xb_count_sges - Count how many SGEs will be needed |
| * @xdr: xdr_buf containing portion of an RPC message to transmit |
| * @data: pointer to arguments |
| * |
| * Returns: |
| * Number of SGEs needed to Send the contents of @xdr inline |
| */ |
| static int svc_rdma_xb_count_sges(const struct xdr_buf *xdr, |
| void *data) |
| { |
| struct svc_rdma_pullup_data *args = data; |
| unsigned int remaining; |
| unsigned long offset; |
| |
| if (xdr->head[0].iov_len) |
| ++args->pd_num_sges; |
| |
| offset = offset_in_page(xdr->page_base); |
| remaining = xdr->page_len; |
| while (remaining) { |
| ++args->pd_num_sges; |
| remaining -= min_t(u32, PAGE_SIZE - offset, remaining); |
| offset = 0; |
| } |
| |
| if (xdr->tail[0].iov_len) |
| ++args->pd_num_sges; |
| |
| args->pd_length += xdr->len; |
| return 0; |
| } |
| |
| /** |
| * svc_rdma_pull_up_needed - Determine whether to use pull-up |
| * @rdma: controlling transport |
| * @sctxt: send_ctxt for the Send WR |
| * @rctxt: Write and Reply chunks provided by client |
| * @xdr: xdr_buf containing RPC message to transmit |
| * |
| * Returns: |
| * %true if pull-up must be used |
| * %false otherwise |
| */ |
| static bool svc_rdma_pull_up_needed(const struct svcxprt_rdma *rdma, |
| const struct svc_rdma_send_ctxt *sctxt, |
| const struct svc_rdma_recv_ctxt *rctxt, |
| const struct xdr_buf *xdr) |
| { |
| /* Resources needed for the transport header */ |
| struct svc_rdma_pullup_data args = { |
| .pd_length = sctxt->sc_hdrbuf.len, |
| .pd_num_sges = 1, |
| }; |
| int ret; |
| |
| ret = pcl_process_nonpayloads(&rctxt->rc_write_pcl, xdr, |
| svc_rdma_xb_count_sges, &args); |
| if (ret < 0) |
| return false; |
| |
| if (args.pd_length < RPCRDMA_PULLUP_THRESH) |
| return true; |
| return args.pd_num_sges >= rdma->sc_max_send_sges; |
| } |
| |
| /** |
| * svc_rdma_xb_linearize - Copy region of xdr_buf to flat buffer |
| * @xdr: xdr_buf containing portion of an RPC message to copy |
| * @data: pointer to arguments |
| * |
| * Returns: |
| * Always zero. |
| */ |
| static int svc_rdma_xb_linearize(const struct xdr_buf *xdr, |
| void *data) |
| { |
| struct svc_rdma_pullup_data *args = data; |
| unsigned int len, remaining; |
| unsigned long pageoff; |
| struct page **ppages; |
| |
| if (xdr->head[0].iov_len) { |
| memcpy(args->pd_dest, xdr->head[0].iov_base, xdr->head[0].iov_len); |
| args->pd_dest += xdr->head[0].iov_len; |
| } |
| |
| ppages = xdr->pages + (xdr->page_base >> PAGE_SHIFT); |
| pageoff = offset_in_page(xdr->page_base); |
| remaining = xdr->page_len; |
| while (remaining) { |
| len = min_t(u32, PAGE_SIZE - pageoff, remaining); |
| memcpy(args->pd_dest, page_address(*ppages) + pageoff, len); |
| remaining -= len; |
| args->pd_dest += len; |
| pageoff = 0; |
| ppages++; |
| } |
| |
| if (xdr->tail[0].iov_len) { |
| memcpy(args->pd_dest, xdr->tail[0].iov_base, xdr->tail[0].iov_len); |
| args->pd_dest += xdr->tail[0].iov_len; |
| } |
| |
| args->pd_length += xdr->len; |
| return 0; |
| } |
| |
| /** |
| * svc_rdma_pull_up_reply_msg - Copy Reply into a single buffer |
| * @rdma: controlling transport |
| * @sctxt: send_ctxt for the Send WR; xprt hdr is already prepared |
| * @rctxt: Write and Reply chunks provided by client |
| * @xdr: prepared xdr_buf containing RPC message |
| * |
| * The device is not capable of sending the reply directly. |
| * Assemble the elements of @xdr into the transport header buffer. |
| * |
| * Assumptions: |
| * pull_up_needed has determined that @xdr will fit in the buffer. |
| * |
| * Returns: |
| * %0 if pull-up was successful |
| * %-EMSGSIZE if a buffer manipulation problem occurred |
| */ |
| static int svc_rdma_pull_up_reply_msg(const struct svcxprt_rdma *rdma, |
| struct svc_rdma_send_ctxt *sctxt, |
| const struct svc_rdma_recv_ctxt *rctxt, |
| const struct xdr_buf *xdr) |
| { |
| struct svc_rdma_pullup_data args = { |
| .pd_dest = sctxt->sc_xprt_buf + sctxt->sc_hdrbuf.len, |
| }; |
| int ret; |
| |
| ret = pcl_process_nonpayloads(&rctxt->rc_write_pcl, xdr, |
| svc_rdma_xb_linearize, &args); |
| if (ret < 0) |
| return ret; |
| |
| sctxt->sc_sges[0].length = sctxt->sc_hdrbuf.len + args.pd_length; |
| trace_svcrdma_send_pullup(sctxt, args.pd_length); |
| return 0; |
| } |
| |
| /* svc_rdma_map_reply_msg - DMA map the buffer holding RPC message |
| * @rdma: controlling transport |
| * @sctxt: send_ctxt for the Send WR |
| * @rctxt: Write and Reply chunks provided by client |
| * @xdr: prepared xdr_buf containing RPC message |
| * |
| * Returns: |
| * %0 if DMA mapping was successful. |
| * %-EMSGSIZE if a buffer manipulation problem occurred |
| * %-EIO if DMA mapping failed |
| * |
| * The Send WR's num_sge field is set in all cases. |
| */ |
| int svc_rdma_map_reply_msg(struct svcxprt_rdma *rdma, |
| struct svc_rdma_send_ctxt *sctxt, |
| const struct svc_rdma_recv_ctxt *rctxt, |
| const struct xdr_buf *xdr) |
| { |
| struct svc_rdma_map_data args = { |
| .md_rdma = rdma, |
| .md_ctxt = sctxt, |
| }; |
| |
| /* Set up the (persistently-mapped) transport header SGE. */ |
| sctxt->sc_send_wr.num_sge = 1; |
| sctxt->sc_sges[0].length = sctxt->sc_hdrbuf.len; |
| |
| /* If there is a Reply chunk, nothing follows the transport |
| * header, and we're done here. |
| */ |
| if (!pcl_is_empty(&rctxt->rc_reply_pcl)) |
| return 0; |
| |
| /* For pull-up, svc_rdma_send() will sync the transport header. |
| * No additional DMA mapping is necessary. |
| */ |
| if (svc_rdma_pull_up_needed(rdma, sctxt, rctxt, xdr)) |
| return svc_rdma_pull_up_reply_msg(rdma, sctxt, rctxt, xdr); |
| |
| return pcl_process_nonpayloads(&rctxt->rc_write_pcl, xdr, |
| svc_rdma_xb_dma_map, &args); |
| } |
| |
| /* The svc_rqst and all resources it owns are released as soon as |
| * svc_rdma_sendto returns. Transfer pages under I/O to the ctxt |
| * so they are released by the Send completion handler. |
| */ |
| static void svc_rdma_save_io_pages(struct svc_rqst *rqstp, |
| struct svc_rdma_send_ctxt *ctxt) |
| { |
| int i, pages = rqstp->rq_next_page - rqstp->rq_respages; |
| |
| ctxt->sc_page_count += pages; |
| for (i = 0; i < pages; i++) { |
| ctxt->sc_pages[i] = rqstp->rq_respages[i]; |
| rqstp->rq_respages[i] = NULL; |
| } |
| |
| /* Prevent svc_xprt_release from releasing pages in rq_pages */ |
| rqstp->rq_next_page = rqstp->rq_respages; |
| } |
| |
| /* Prepare the portion of the RPC Reply that will be transmitted |
| * via RDMA Send. The RPC-over-RDMA transport header is prepared |
| * in sc_sges[0], and the RPC xdr_buf is prepared in following sges. |
| * |
| * Depending on whether a Write list or Reply chunk is present, |
| * the server may send all, a portion of, or none of the xdr_buf. |
| * In the latter case, only the transport header (sc_sges[0]) is |
| * transmitted. |
| * |
| * RDMA Send is the last step of transmitting an RPC reply. Pages |
| * involved in the earlier RDMA Writes are here transferred out |
| * of the rqstp and into the sctxt's page array. These pages are |
| * DMA unmapped by each Write completion, but the subsequent Send |
| * completion finally releases these pages. |
| * |
| * Assumptions: |
| * - The Reply's transport header will never be larger than a page. |
| */ |
| static int svc_rdma_send_reply_msg(struct svcxprt_rdma *rdma, |
| struct svc_rdma_send_ctxt *sctxt, |
| const struct svc_rdma_recv_ctxt *rctxt, |
| struct svc_rqst *rqstp) |
| { |
| int ret; |
| |
| ret = svc_rdma_map_reply_msg(rdma, sctxt, rctxt, &rqstp->rq_res); |
| if (ret < 0) |
| return ret; |
| |
| svc_rdma_save_io_pages(rqstp, sctxt); |
| |
| if (rctxt->rc_inv_rkey) { |
| sctxt->sc_send_wr.opcode = IB_WR_SEND_WITH_INV; |
| sctxt->sc_send_wr.ex.invalidate_rkey = rctxt->rc_inv_rkey; |
| } else { |
| sctxt->sc_send_wr.opcode = IB_WR_SEND; |
| } |
| |
| return svc_rdma_send(rdma, sctxt); |
| } |
| |
| /** |
| * svc_rdma_send_error_msg - Send an RPC/RDMA v1 error response |
| * @rdma: controlling transport context |
| * @sctxt: Send context for the response |
| * @rctxt: Receive context for incoming bad message |
| * @status: negative errno indicating error that occurred |
| * |
| * Given the client-provided Read, Write, and Reply chunks, the |
| * server was not able to parse the Call or form a complete Reply. |
| * Return an RDMA_ERROR message so the client can retire the RPC |
| * transaction. |
| * |
| * The caller does not have to release @sctxt. It is released by |
| * Send completion, or by this function on error. |
| */ |
| void svc_rdma_send_error_msg(struct svcxprt_rdma *rdma, |
| struct svc_rdma_send_ctxt *sctxt, |
| struct svc_rdma_recv_ctxt *rctxt, |
| int status) |
| { |
| __be32 *rdma_argp = rctxt->rc_recv_buf; |
| __be32 *p; |
| |
| rpcrdma_set_xdrlen(&sctxt->sc_hdrbuf, 0); |
| xdr_init_encode(&sctxt->sc_stream, &sctxt->sc_hdrbuf, |
| sctxt->sc_xprt_buf, NULL); |
| |
| p = xdr_reserve_space(&sctxt->sc_stream, |
| rpcrdma_fixed_maxsz * sizeof(*p)); |
| if (!p) |
| goto put_ctxt; |
| |
| *p++ = *rdma_argp; |
| *p++ = *(rdma_argp + 1); |
| *p++ = rdma->sc_fc_credits; |
| *p = rdma_error; |
| |
| switch (status) { |
| case -EPROTONOSUPPORT: |
| p = xdr_reserve_space(&sctxt->sc_stream, 3 * sizeof(*p)); |
| if (!p) |
| goto put_ctxt; |
| |
| *p++ = err_vers; |
| *p++ = rpcrdma_version; |
| *p = rpcrdma_version; |
| trace_svcrdma_err_vers(*rdma_argp); |
| break; |
| default: |
| p = xdr_reserve_space(&sctxt->sc_stream, sizeof(*p)); |
| if (!p) |
| goto put_ctxt; |
| |
| *p = err_chunk; |
| trace_svcrdma_err_chunk(*rdma_argp); |
| } |
| |
| /* Remote Invalidation is skipped for simplicity. */ |
| sctxt->sc_send_wr.num_sge = 1; |
| sctxt->sc_send_wr.opcode = IB_WR_SEND; |
| sctxt->sc_sges[0].length = sctxt->sc_hdrbuf.len; |
| if (svc_rdma_send(rdma, sctxt)) |
| goto put_ctxt; |
| return; |
| |
| put_ctxt: |
| svc_rdma_send_ctxt_put(rdma, sctxt); |
| } |
| |
| /** |
| * svc_rdma_sendto - Transmit an RPC reply |
| * @rqstp: processed RPC request, reply XDR already in ::rq_res |
| * |
| * Any resources still associated with @rqstp are released upon return. |
| * If no reply message was possible, the connection is closed. |
| * |
| * Returns: |
| * %0 if an RPC reply has been successfully posted, |
| * %-ENOMEM if a resource shortage occurred (connection is lost), |
| * %-ENOTCONN if posting failed (connection is lost). |
| */ |
| int svc_rdma_sendto(struct svc_rqst *rqstp) |
| { |
| struct svc_xprt *xprt = rqstp->rq_xprt; |
| struct svcxprt_rdma *rdma = |
| container_of(xprt, struct svcxprt_rdma, sc_xprt); |
| struct svc_rdma_recv_ctxt *rctxt = rqstp->rq_xprt_ctxt; |
| __be32 *rdma_argp = rctxt->rc_recv_buf; |
| struct svc_rdma_send_ctxt *sctxt; |
| unsigned int rc_size; |
| __be32 *p; |
| int ret; |
| |
| ret = -ENOTCONN; |
| if (svc_xprt_is_dead(xprt)) |
| goto drop_connection; |
| |
| ret = -ENOMEM; |
| sctxt = svc_rdma_send_ctxt_get(rdma); |
| if (!sctxt) |
| goto drop_connection; |
| |
| ret = -EMSGSIZE; |
| p = xdr_reserve_space(&sctxt->sc_stream, |
| rpcrdma_fixed_maxsz * sizeof(*p)); |
| if (!p) |
| goto put_ctxt; |
| |
| ret = svc_rdma_send_reply_chunk(rdma, rctxt, &rqstp->rq_res); |
| if (ret < 0) |
| goto reply_chunk; |
| rc_size = ret; |
| |
| *p++ = *rdma_argp; |
| *p++ = *(rdma_argp + 1); |
| *p++ = rdma->sc_fc_credits; |
| *p = pcl_is_empty(&rctxt->rc_reply_pcl) ? rdma_msg : rdma_nomsg; |
| |
| ret = svc_rdma_encode_read_list(sctxt); |
| if (ret < 0) |
| goto put_ctxt; |
| ret = svc_rdma_encode_write_list(rctxt, sctxt); |
| if (ret < 0) |
| goto put_ctxt; |
| ret = svc_rdma_encode_reply_chunk(rctxt, sctxt, rc_size); |
| if (ret < 0) |
| goto put_ctxt; |
| |
| ret = svc_rdma_send_reply_msg(rdma, sctxt, rctxt, rqstp); |
| if (ret < 0) |
| goto put_ctxt; |
| return 0; |
| |
| reply_chunk: |
| if (ret != -E2BIG && ret != -EINVAL) |
| goto put_ctxt; |
| |
| /* Send completion releases payload pages that were part |
| * of previously posted RDMA Writes. |
| */ |
| svc_rdma_save_io_pages(rqstp, sctxt); |
| svc_rdma_send_error_msg(rdma, sctxt, rctxt, ret); |
| return 0; |
| |
| put_ctxt: |
| svc_rdma_send_ctxt_put(rdma, sctxt); |
| drop_connection: |
| trace_svcrdma_send_err(rqstp, ret); |
| svc_xprt_deferred_close(&rdma->sc_xprt); |
| return -ENOTCONN; |
| } |
| |
| /** |
| * svc_rdma_result_payload - special processing for a result payload |
| * @rqstp: svc_rqst to operate on |
| * @offset: payload's byte offset in @xdr |
| * @length: size of payload, in bytes |
| * |
| * Return values: |
| * %0 if successful or nothing needed to be done |
| * %-EMSGSIZE on XDR buffer overflow |
| * %-E2BIG if the payload was larger than the Write chunk |
| * %-EINVAL if client provided too many segments |
| * %-ENOMEM if rdma_rw context pool was exhausted |
| * %-ENOTCONN if posting failed (connection is lost) |
| * %-EIO if rdma_rw initialization failed (DMA mapping, etc) |
| */ |
| int svc_rdma_result_payload(struct svc_rqst *rqstp, unsigned int offset, |
| unsigned int length) |
| { |
| struct svc_rdma_recv_ctxt *rctxt = rqstp->rq_xprt_ctxt; |
| struct svc_rdma_chunk *chunk; |
| struct svcxprt_rdma *rdma; |
| struct xdr_buf subbuf; |
| int ret; |
| |
| chunk = rctxt->rc_cur_result_payload; |
| if (!length || !chunk) |
| return 0; |
| rctxt->rc_cur_result_payload = |
| pcl_next_chunk(&rctxt->rc_write_pcl, chunk); |
| if (length > chunk->ch_length) |
| return -E2BIG; |
| |
| chunk->ch_position = offset; |
| chunk->ch_payload_length = length; |
| |
| if (xdr_buf_subsegment(&rqstp->rq_res, &subbuf, offset, length)) |
| return -EMSGSIZE; |
| |
| rdma = container_of(rqstp->rq_xprt, struct svcxprt_rdma, sc_xprt); |
| ret = svc_rdma_send_write_chunk(rdma, chunk, &subbuf); |
| if (ret < 0) |
| return ret; |
| return 0; |
| } |