blob: 1dd19d0cb269f5a945b37e09cec3824f2f9e1eb1 [file] [log] [blame]
// SPDX-License-Identifier: GPL-2.0
/* Driver for the Texas Instruments DP83822, DP83825 and DP83826 PHYs.
*
* Copyright (C) 2017 Texas Instruments Inc.
*/
#include <linux/ethtool.h>
#include <linux/etherdevice.h>
#include <linux/kernel.h>
#include <linux/mii.h>
#include <linux/module.h>
#include <linux/of.h>
#include <linux/phy.h>
#include <linux/netdevice.h>
#define DP83822_PHY_ID 0x2000a240
#define DP83825S_PHY_ID 0x2000a140
#define DP83825I_PHY_ID 0x2000a150
#define DP83825CM_PHY_ID 0x2000a160
#define DP83825CS_PHY_ID 0x2000a170
#define DP83826C_PHY_ID 0x2000a130
#define DP83826NC_PHY_ID 0x2000a110
#define DP83822_DEVADDR 0x1f
#define MII_DP83822_PHYSCR 0x11
#define MII_DP83822_MISR1 0x12
#define MII_DP83822_MISR2 0x13
#define MII_DP83822_RESET_CTRL 0x1f
#define DP83822_HW_RESET BIT(15)
#define DP83822_SW_RESET BIT(14)
/* PHYSCR Register Fields */
#define DP83822_PHYSCR_INT_OE BIT(0) /* Interrupt Output Enable */
#define DP83822_PHYSCR_INTEN BIT(1) /* Interrupt Enable */
/* MISR1 bits */
#define DP83822_RX_ERR_HF_INT_EN BIT(0)
#define DP83822_FALSE_CARRIER_HF_INT_EN BIT(1)
#define DP83822_ANEG_COMPLETE_INT_EN BIT(2)
#define DP83822_DUP_MODE_CHANGE_INT_EN BIT(3)
#define DP83822_SPEED_CHANGED_INT_EN BIT(4)
#define DP83822_LINK_STAT_INT_EN BIT(5)
#define DP83822_ENERGY_DET_INT_EN BIT(6)
#define DP83822_LINK_QUAL_INT_EN BIT(7)
/* MISR2 bits */
#define DP83822_JABBER_DET_INT_EN BIT(0)
#define DP83822_WOL_PKT_INT_EN BIT(1)
#define DP83822_SLEEP_MODE_INT_EN BIT(2)
#define DP83822_MDI_XOVER_INT_EN BIT(3)
#define DP83822_LB_FIFO_INT_EN BIT(4)
#define DP83822_PAGE_RX_INT_EN BIT(5)
#define DP83822_ANEG_ERR_INT_EN BIT(6)
#define DP83822_EEE_ERROR_CHANGE_INT_EN BIT(7)
/* INT_STAT1 bits */
#define DP83822_WOL_INT_EN BIT(4)
#define DP83822_WOL_INT_STAT BIT(12)
#define MII_DP83822_RXSOP1 0x04a5
#define MII_DP83822_RXSOP2 0x04a6
#define MII_DP83822_RXSOP3 0x04a7
/* WoL Registers */
#define MII_DP83822_WOL_CFG 0x04a0
#define MII_DP83822_WOL_STAT 0x04a1
#define MII_DP83822_WOL_DA1 0x04a2
#define MII_DP83822_WOL_DA2 0x04a3
#define MII_DP83822_WOL_DA3 0x04a4
/* WoL bits */
#define DP83822_WOL_MAGIC_EN BIT(0)
#define DP83822_WOL_SECURE_ON BIT(5)
#define DP83822_WOL_EN BIT(7)
#define DP83822_WOL_INDICATION_SEL BIT(8)
#define DP83822_WOL_CLR_INDICATION BIT(11)
static int dp83822_ack_interrupt(struct phy_device *phydev)
{
int err;
err = phy_read(phydev, MII_DP83822_MISR1);
if (err < 0)
return err;
err = phy_read(phydev, MII_DP83822_MISR2);
if (err < 0)
return err;
return 0;
}
static int dp83822_set_wol(struct phy_device *phydev,
struct ethtool_wolinfo *wol)
{
struct net_device *ndev = phydev->attached_dev;
u16 value;
const u8 *mac;
if (wol->wolopts & (WAKE_MAGIC | WAKE_MAGICSECURE)) {
mac = (const u8 *)ndev->dev_addr;
if (!is_valid_ether_addr(mac))
return -EINVAL;
/* MAC addresses start with byte 5, but stored in mac[0].
* 822 PHYs store bytes 4|5, 2|3, 0|1
*/
phy_write_mmd(phydev, DP83822_DEVADDR, MII_DP83822_WOL_DA1,
(mac[1] << 8) | mac[0]);
phy_write_mmd(phydev, DP83822_DEVADDR, MII_DP83822_WOL_DA2,
(mac[3] << 8) | mac[2]);
phy_write_mmd(phydev, DP83822_DEVADDR, MII_DP83822_WOL_DA3,
(mac[5] << 8) | mac[4]);
value = phy_read_mmd(phydev, DP83822_DEVADDR,
MII_DP83822_WOL_CFG);
if (wol->wolopts & WAKE_MAGIC)
value |= DP83822_WOL_MAGIC_EN;
else
value &= ~DP83822_WOL_MAGIC_EN;
if (wol->wolopts & WAKE_MAGICSECURE) {
phy_write_mmd(phydev, DP83822_DEVADDR,
MII_DP83822_RXSOP1,
(wol->sopass[1] << 8) | wol->sopass[0]);
phy_write_mmd(phydev, DP83822_DEVADDR,
MII_DP83822_RXSOP2,
(wol->sopass[3] << 8) | wol->sopass[2]);
phy_write_mmd(phydev, DP83822_DEVADDR,
MII_DP83822_RXSOP3,
(wol->sopass[5] << 8) | wol->sopass[4]);
value |= DP83822_WOL_SECURE_ON;
} else {
value &= ~DP83822_WOL_SECURE_ON;
}
/* Clear any pending WoL interrupt */
phy_read(phydev, MII_DP83822_MISR2);
value |= DP83822_WOL_EN | DP83822_WOL_INDICATION_SEL |
DP83822_WOL_CLR_INDICATION;
return phy_write_mmd(phydev, DP83822_DEVADDR,
MII_DP83822_WOL_CFG, value);
} else {
return phy_clear_bits_mmd(phydev, DP83822_DEVADDR,
MII_DP83822_WOL_CFG, DP83822_WOL_EN);
}
}
static void dp83822_get_wol(struct phy_device *phydev,
struct ethtool_wolinfo *wol)
{
int value;
u16 sopass_val;
wol->supported = (WAKE_MAGIC | WAKE_MAGICSECURE);
wol->wolopts = 0;
value = phy_read_mmd(phydev, DP83822_DEVADDR, MII_DP83822_WOL_CFG);
if (value & DP83822_WOL_MAGIC_EN)
wol->wolopts |= WAKE_MAGIC;
if (value & DP83822_WOL_SECURE_ON) {
sopass_val = phy_read_mmd(phydev, DP83822_DEVADDR,
MII_DP83822_RXSOP1);
wol->sopass[0] = (sopass_val & 0xff);
wol->sopass[1] = (sopass_val >> 8);
sopass_val = phy_read_mmd(phydev, DP83822_DEVADDR,
MII_DP83822_RXSOP2);
wol->sopass[2] = (sopass_val & 0xff);
wol->sopass[3] = (sopass_val >> 8);
sopass_val = phy_read_mmd(phydev, DP83822_DEVADDR,
MII_DP83822_RXSOP3);
wol->sopass[4] = (sopass_val & 0xff);
wol->sopass[5] = (sopass_val >> 8);
wol->wolopts |= WAKE_MAGICSECURE;
}
/* WoL is not enabled so set wolopts to 0 */
if (!(value & DP83822_WOL_EN))
wol->wolopts = 0;
}
static int dp83822_config_intr(struct phy_device *phydev)
{
int misr_status;
int physcr_status;
int err;
if (phydev->interrupts == PHY_INTERRUPT_ENABLED) {
misr_status = phy_read(phydev, MII_DP83822_MISR1);
if (misr_status < 0)
return misr_status;
misr_status |= (DP83822_RX_ERR_HF_INT_EN |
DP83822_FALSE_CARRIER_HF_INT_EN |
DP83822_ANEG_COMPLETE_INT_EN |
DP83822_DUP_MODE_CHANGE_INT_EN |
DP83822_SPEED_CHANGED_INT_EN |
DP83822_LINK_STAT_INT_EN |
DP83822_ENERGY_DET_INT_EN |
DP83822_LINK_QUAL_INT_EN);
err = phy_write(phydev, MII_DP83822_MISR1, misr_status);
if (err < 0)
return err;
misr_status = phy_read(phydev, MII_DP83822_MISR2);
if (misr_status < 0)
return misr_status;
misr_status |= (DP83822_JABBER_DET_INT_EN |
DP83822_WOL_PKT_INT_EN |
DP83822_SLEEP_MODE_INT_EN |
DP83822_MDI_XOVER_INT_EN |
DP83822_LB_FIFO_INT_EN |
DP83822_PAGE_RX_INT_EN |
DP83822_ANEG_ERR_INT_EN |
DP83822_EEE_ERROR_CHANGE_INT_EN);
err = phy_write(phydev, MII_DP83822_MISR2, misr_status);
if (err < 0)
return err;
physcr_status = phy_read(phydev, MII_DP83822_PHYSCR);
if (physcr_status < 0)
return physcr_status;
physcr_status |= DP83822_PHYSCR_INT_OE | DP83822_PHYSCR_INTEN;
} else {
err = phy_write(phydev, MII_DP83822_MISR1, 0);
if (err < 0)
return err;
err = phy_write(phydev, MII_DP83822_MISR1, 0);
if (err < 0)
return err;
physcr_status = phy_read(phydev, MII_DP83822_PHYSCR);
if (physcr_status < 0)
return physcr_status;
physcr_status &= ~DP83822_PHYSCR_INTEN;
}
return phy_write(phydev, MII_DP83822_PHYSCR, physcr_status);
}
static int dp83822_config_init(struct phy_device *phydev)
{
int value = DP83822_WOL_EN | DP83822_WOL_MAGIC_EN |
DP83822_WOL_SECURE_ON;
return phy_clear_bits_mmd(phydev, DP83822_DEVADDR,
MII_DP83822_WOL_CFG, value);
}
static int dp83822_phy_reset(struct phy_device *phydev)
{
int err;
err = phy_write(phydev, MII_DP83822_RESET_CTRL, DP83822_HW_RESET);
if (err < 0)
return err;
dp83822_config_init(phydev);
return 0;
}
static int dp83822_suspend(struct phy_device *phydev)
{
int value;
value = phy_read_mmd(phydev, DP83822_DEVADDR, MII_DP83822_WOL_CFG);
if (!(value & DP83822_WOL_EN))
genphy_suspend(phydev);
return 0;
}
static int dp83822_resume(struct phy_device *phydev)
{
int value;
genphy_resume(phydev);
value = phy_read_mmd(phydev, DP83822_DEVADDR, MII_DP83822_WOL_CFG);
phy_write_mmd(phydev, DP83822_DEVADDR, MII_DP83822_WOL_CFG, value |
DP83822_WOL_CLR_INDICATION);
return 0;
}
#define DP83822_PHY_DRIVER(_id, _name) \
{ \
PHY_ID_MATCH_MODEL(_id), \
.name = (_name), \
/* PHY_BASIC_FEATURES */ \
.soft_reset = dp83822_phy_reset, \
.config_init = dp83822_config_init, \
.get_wol = dp83822_get_wol, \
.set_wol = dp83822_set_wol, \
.ack_interrupt = dp83822_ack_interrupt, \
.config_intr = dp83822_config_intr, \
.suspend = dp83822_suspend, \
.resume = dp83822_resume, \
}
static struct phy_driver dp83822_driver[] = {
DP83822_PHY_DRIVER(DP83822_PHY_ID, "TI DP83822"),
DP83822_PHY_DRIVER(DP83825I_PHY_ID, "TI DP83825I"),
DP83822_PHY_DRIVER(DP83826C_PHY_ID, "TI DP83826C"),
DP83822_PHY_DRIVER(DP83826NC_PHY_ID, "TI DP83826NC"),
DP83822_PHY_DRIVER(DP83825S_PHY_ID, "TI DP83825S"),
DP83822_PHY_DRIVER(DP83825CM_PHY_ID, "TI DP83825M"),
DP83822_PHY_DRIVER(DP83825CS_PHY_ID, "TI DP83825CS"),
};
module_phy_driver(dp83822_driver);
static struct mdio_device_id __maybe_unused dp83822_tbl[] = {
{ DP83822_PHY_ID, 0xfffffff0 },
{ DP83825I_PHY_ID, 0xfffffff0 },
{ DP83826C_PHY_ID, 0xfffffff0 },
{ DP83826NC_PHY_ID, 0xfffffff0 },
{ DP83825S_PHY_ID, 0xfffffff0 },
{ DP83825CM_PHY_ID, 0xfffffff0 },
{ DP83825CS_PHY_ID, 0xfffffff0 },
{ },
};
MODULE_DEVICE_TABLE(mdio, dp83822_tbl);
MODULE_DESCRIPTION("Texas Instruments DP83822 PHY driver");
MODULE_AUTHOR("Dan Murphy <dmurphy@ti.com");
MODULE_LICENSE("GPL v2");