| // SPDX-License-Identifier: GPL-2.0-or-later |
| /* |
| * DECnet An implementation of the DECnet protocol suite for the LINUX |
| * operating system. DECnet is implemented using the BSD Socket |
| * interface as the means of communication with the user level. |
| * |
| * DECnet Network Services Protocol (Input) |
| * |
| * Author: Eduardo Marcelo Serrat <emserrat@geocities.com> |
| * |
| * Changes: |
| * |
| * Steve Whitehouse: Split into dn_nsp_in.c and dn_nsp_out.c from |
| * original dn_nsp.c. |
| * Steve Whitehouse: Updated to work with my new routing architecture. |
| * Steve Whitehouse: Add changes from Eduardo Serrat's patches. |
| * Steve Whitehouse: Put all ack handling code in a common routine. |
| * Steve Whitehouse: Put other common bits into dn_nsp_rx() |
| * Steve Whitehouse: More checks on skb->len to catch bogus packets |
| * Fixed various race conditions and possible nasties. |
| * Steve Whitehouse: Now handles returned conninit frames. |
| * David S. Miller: New socket locking |
| * Steve Whitehouse: Fixed lockup when socket filtering was enabled. |
| * Paul Koning: Fix to push CC sockets into RUN when acks are |
| * received. |
| * Steve Whitehouse: |
| * Patrick Caulfield: Checking conninits for correctness & sending of error |
| * responses. |
| * Steve Whitehouse: Added backlog congestion level return codes. |
| * Patrick Caulfield: |
| * Steve Whitehouse: Added flow control support (outbound) |
| * Steve Whitehouse: Prepare for nonlinear skbs |
| */ |
| |
| /****************************************************************************** |
| (c) 1995-1998 E.M. Serrat emserrat@geocities.com |
| |
| *******************************************************************************/ |
| |
| #include <linux/errno.h> |
| #include <linux/types.h> |
| #include <linux/socket.h> |
| #include <linux/in.h> |
| #include <linux/kernel.h> |
| #include <linux/timer.h> |
| #include <linux/string.h> |
| #include <linux/sockios.h> |
| #include <linux/net.h> |
| #include <linux/netdevice.h> |
| #include <linux/inet.h> |
| #include <linux/route.h> |
| #include <linux/slab.h> |
| #include <net/sock.h> |
| #include <net/tcp_states.h> |
| #include <linux/fcntl.h> |
| #include <linux/mm.h> |
| #include <linux/termios.h> |
| #include <linux/interrupt.h> |
| #include <linux/proc_fs.h> |
| #include <linux/stat.h> |
| #include <linux/init.h> |
| #include <linux/poll.h> |
| #include <linux/netfilter_decnet.h> |
| #include <net/neighbour.h> |
| #include <net/dst.h> |
| #include <net/dn.h> |
| #include <net/dn_nsp.h> |
| #include <net/dn_dev.h> |
| #include <net/dn_route.h> |
| |
| extern int decnet_log_martians; |
| |
| static void dn_log_martian(struct sk_buff *skb, const char *msg) |
| { |
| if (decnet_log_martians) { |
| char *devname = skb->dev ? skb->dev->name : "???"; |
| struct dn_skb_cb *cb = DN_SKB_CB(skb); |
| net_info_ratelimited("DECnet: Martian packet (%s) dev=%s src=0x%04hx dst=0x%04hx srcport=0x%04hx dstport=0x%04hx\n", |
| msg, devname, |
| le16_to_cpu(cb->src), |
| le16_to_cpu(cb->dst), |
| le16_to_cpu(cb->src_port), |
| le16_to_cpu(cb->dst_port)); |
| } |
| } |
| |
| /* |
| * For this function we've flipped the cross-subchannel bit |
| * if the message is an otherdata or linkservice message. Thus |
| * we can use it to work out what to update. |
| */ |
| static void dn_ack(struct sock *sk, struct sk_buff *skb, unsigned short ack) |
| { |
| struct dn_scp *scp = DN_SK(sk); |
| unsigned short type = ((ack >> 12) & 0x0003); |
| int wakeup = 0; |
| |
| switch (type) { |
| case 0: /* ACK - Data */ |
| if (dn_after(ack, scp->ackrcv_dat)) { |
| scp->ackrcv_dat = ack & 0x0fff; |
| wakeup |= dn_nsp_check_xmit_queue(sk, skb, |
| &scp->data_xmit_queue, |
| ack); |
| } |
| break; |
| case 1: /* NAK - Data */ |
| break; |
| case 2: /* ACK - OtherData */ |
| if (dn_after(ack, scp->ackrcv_oth)) { |
| scp->ackrcv_oth = ack & 0x0fff; |
| wakeup |= dn_nsp_check_xmit_queue(sk, skb, |
| &scp->other_xmit_queue, |
| ack); |
| } |
| break; |
| case 3: /* NAK - OtherData */ |
| break; |
| } |
| |
| if (wakeup && !sock_flag(sk, SOCK_DEAD)) |
| sk->sk_state_change(sk); |
| } |
| |
| /* |
| * This function is a universal ack processor. |
| */ |
| static int dn_process_ack(struct sock *sk, struct sk_buff *skb, int oth) |
| { |
| __le16 *ptr = (__le16 *)skb->data; |
| int len = 0; |
| unsigned short ack; |
| |
| if (skb->len < 2) |
| return len; |
| |
| if ((ack = le16_to_cpu(*ptr)) & 0x8000) { |
| skb_pull(skb, 2); |
| ptr++; |
| len += 2; |
| if ((ack & 0x4000) == 0) { |
| if (oth) |
| ack ^= 0x2000; |
| dn_ack(sk, skb, ack); |
| } |
| } |
| |
| if (skb->len < 2) |
| return len; |
| |
| if ((ack = le16_to_cpu(*ptr)) & 0x8000) { |
| skb_pull(skb, 2); |
| len += 2; |
| if ((ack & 0x4000) == 0) { |
| if (oth) |
| ack ^= 0x2000; |
| dn_ack(sk, skb, ack); |
| } |
| } |
| |
| return len; |
| } |
| |
| |
| /** |
| * dn_check_idf - Check an image data field format is correct. |
| * @pptr: Pointer to pointer to image data |
| * @len: Pointer to length of image data |
| * @max: The maximum allowed length of the data in the image data field |
| * @follow_on: Check that this many bytes exist beyond the end of the image data |
| * |
| * Returns: 0 if ok, -1 on error |
| */ |
| static inline int dn_check_idf(unsigned char **pptr, int *len, unsigned char max, unsigned char follow_on) |
| { |
| unsigned char *ptr = *pptr; |
| unsigned char flen = *ptr++; |
| |
| (*len)--; |
| if (flen > max) |
| return -1; |
| if ((flen + follow_on) > *len) |
| return -1; |
| |
| *len -= flen; |
| *pptr = ptr + flen; |
| return 0; |
| } |
| |
| /* |
| * Table of reason codes to pass back to node which sent us a badly |
| * formed message, plus text messages for the log. A zero entry in |
| * the reason field means "don't reply" otherwise a disc init is sent with |
| * the specified reason code. |
| */ |
| static struct { |
| unsigned short reason; |
| const char *text; |
| } ci_err_table[] = { |
| { 0, "CI: Truncated message" }, |
| { NSP_REASON_ID, "CI: Destination username error" }, |
| { NSP_REASON_ID, "CI: Destination username type" }, |
| { NSP_REASON_US, "CI: Source username error" }, |
| { 0, "CI: Truncated at menuver" }, |
| { 0, "CI: Truncated before access or user data" }, |
| { NSP_REASON_IO, "CI: Access data format error" }, |
| { NSP_REASON_IO, "CI: User data format error" } |
| }; |
| |
| /* |
| * This function uses a slightly different lookup method |
| * to find its sockets, since it searches on object name/number |
| * rather than port numbers. Various tests are done to ensure that |
| * the incoming data is in the correct format before it is queued to |
| * a socket. |
| */ |
| static struct sock *dn_find_listener(struct sk_buff *skb, unsigned short *reason) |
| { |
| struct dn_skb_cb *cb = DN_SKB_CB(skb); |
| struct nsp_conn_init_msg *msg = (struct nsp_conn_init_msg *)skb->data; |
| struct sockaddr_dn dstaddr; |
| struct sockaddr_dn srcaddr; |
| unsigned char type = 0; |
| int dstlen; |
| int srclen; |
| unsigned char *ptr; |
| int len; |
| int err = 0; |
| unsigned char menuver; |
| |
| memset(&dstaddr, 0, sizeof(struct sockaddr_dn)); |
| memset(&srcaddr, 0, sizeof(struct sockaddr_dn)); |
| |
| /* |
| * 1. Decode & remove message header |
| */ |
| cb->src_port = msg->srcaddr; |
| cb->dst_port = msg->dstaddr; |
| cb->services = msg->services; |
| cb->info = msg->info; |
| cb->segsize = le16_to_cpu(msg->segsize); |
| |
| if (!pskb_may_pull(skb, sizeof(*msg))) |
| goto err_out; |
| |
| skb_pull(skb, sizeof(*msg)); |
| |
| len = skb->len; |
| ptr = skb->data; |
| |
| /* |
| * 2. Check destination end username format |
| */ |
| dstlen = dn_username2sockaddr(ptr, len, &dstaddr, &type); |
| err++; |
| if (dstlen < 0) |
| goto err_out; |
| |
| err++; |
| if (type > 1) |
| goto err_out; |
| |
| len -= dstlen; |
| ptr += dstlen; |
| |
| /* |
| * 3. Check source end username format |
| */ |
| srclen = dn_username2sockaddr(ptr, len, &srcaddr, &type); |
| err++; |
| if (srclen < 0) |
| goto err_out; |
| |
| len -= srclen; |
| ptr += srclen; |
| err++; |
| if (len < 1) |
| goto err_out; |
| |
| menuver = *ptr; |
| ptr++; |
| len--; |
| |
| /* |
| * 4. Check that optional data actually exists if menuver says it does |
| */ |
| err++; |
| if ((menuver & (DN_MENUVER_ACC | DN_MENUVER_USR)) && (len < 1)) |
| goto err_out; |
| |
| /* |
| * 5. Check optional access data format |
| */ |
| err++; |
| if (menuver & DN_MENUVER_ACC) { |
| if (dn_check_idf(&ptr, &len, 39, 1)) |
| goto err_out; |
| if (dn_check_idf(&ptr, &len, 39, 1)) |
| goto err_out; |
| if (dn_check_idf(&ptr, &len, 39, (menuver & DN_MENUVER_USR) ? 1 : 0)) |
| goto err_out; |
| } |
| |
| /* |
| * 6. Check optional user data format |
| */ |
| err++; |
| if (menuver & DN_MENUVER_USR) { |
| if (dn_check_idf(&ptr, &len, 16, 0)) |
| goto err_out; |
| } |
| |
| /* |
| * 7. Look up socket based on destination end username |
| */ |
| return dn_sklist_find_listener(&dstaddr); |
| err_out: |
| dn_log_martian(skb, ci_err_table[err].text); |
| *reason = ci_err_table[err].reason; |
| return NULL; |
| } |
| |
| |
| static void dn_nsp_conn_init(struct sock *sk, struct sk_buff *skb) |
| { |
| if (sk_acceptq_is_full(sk)) { |
| kfree_skb(skb); |
| return; |
| } |
| |
| sk->sk_ack_backlog++; |
| skb_queue_tail(&sk->sk_receive_queue, skb); |
| sk->sk_state_change(sk); |
| } |
| |
| static void dn_nsp_conn_conf(struct sock *sk, struct sk_buff *skb) |
| { |
| struct dn_skb_cb *cb = DN_SKB_CB(skb); |
| struct dn_scp *scp = DN_SK(sk); |
| unsigned char *ptr; |
| |
| if (skb->len < 4) |
| goto out; |
| |
| ptr = skb->data; |
| cb->services = *ptr++; |
| cb->info = *ptr++; |
| cb->segsize = le16_to_cpu(*(__le16 *)ptr); |
| |
| if ((scp->state == DN_CI) || (scp->state == DN_CD)) { |
| scp->persist = 0; |
| scp->addrrem = cb->src_port; |
| sk->sk_state = TCP_ESTABLISHED; |
| scp->state = DN_RUN; |
| scp->services_rem = cb->services; |
| scp->info_rem = cb->info; |
| scp->segsize_rem = cb->segsize; |
| |
| if ((scp->services_rem & NSP_FC_MASK) == NSP_FC_NONE) |
| scp->max_window = decnet_no_fc_max_cwnd; |
| |
| if (skb->len > 0) { |
| u16 dlen = *skb->data; |
| if ((dlen <= 16) && (dlen <= skb->len)) { |
| scp->conndata_in.opt_optl = cpu_to_le16(dlen); |
| skb_copy_from_linear_data_offset(skb, 1, |
| scp->conndata_in.opt_data, dlen); |
| } |
| } |
| dn_nsp_send_link(sk, DN_NOCHANGE, 0); |
| if (!sock_flag(sk, SOCK_DEAD)) |
| sk->sk_state_change(sk); |
| } |
| |
| out: |
| kfree_skb(skb); |
| } |
| |
| static void dn_nsp_conn_ack(struct sock *sk, struct sk_buff *skb) |
| { |
| struct dn_scp *scp = DN_SK(sk); |
| |
| if (scp->state == DN_CI) { |
| scp->state = DN_CD; |
| scp->persist = 0; |
| } |
| |
| kfree_skb(skb); |
| } |
| |
| static void dn_nsp_disc_init(struct sock *sk, struct sk_buff *skb) |
| { |
| struct dn_scp *scp = DN_SK(sk); |
| struct dn_skb_cb *cb = DN_SKB_CB(skb); |
| unsigned short reason; |
| |
| if (skb->len < 2) |
| goto out; |
| |
| reason = le16_to_cpu(*(__le16 *)skb->data); |
| skb_pull(skb, 2); |
| |
| scp->discdata_in.opt_status = cpu_to_le16(reason); |
| scp->discdata_in.opt_optl = 0; |
| memset(scp->discdata_in.opt_data, 0, 16); |
| |
| if (skb->len > 0) { |
| u16 dlen = *skb->data; |
| if ((dlen <= 16) && (dlen <= skb->len)) { |
| scp->discdata_in.opt_optl = cpu_to_le16(dlen); |
| skb_copy_from_linear_data_offset(skb, 1, scp->discdata_in.opt_data, dlen); |
| } |
| } |
| |
| scp->addrrem = cb->src_port; |
| sk->sk_state = TCP_CLOSE; |
| |
| switch (scp->state) { |
| case DN_CI: |
| case DN_CD: |
| scp->state = DN_RJ; |
| sk->sk_err = ECONNREFUSED; |
| break; |
| case DN_RUN: |
| sk->sk_shutdown |= SHUTDOWN_MASK; |
| scp->state = DN_DN; |
| break; |
| case DN_DI: |
| scp->state = DN_DIC; |
| break; |
| } |
| |
| if (!sock_flag(sk, SOCK_DEAD)) { |
| if (sk->sk_socket->state != SS_UNCONNECTED) |
| sk->sk_socket->state = SS_DISCONNECTING; |
| sk->sk_state_change(sk); |
| } |
| |
| /* |
| * It appears that its possible for remote machines to send disc |
| * init messages with no port identifier if we are in the CI and |
| * possibly also the CD state. Obviously we shouldn't reply with |
| * a message if we don't know what the end point is. |
| */ |
| if (scp->addrrem) { |
| dn_nsp_send_disc(sk, NSP_DISCCONF, NSP_REASON_DC, GFP_ATOMIC); |
| } |
| scp->persist_fxn = dn_destroy_timer; |
| scp->persist = dn_nsp_persist(sk); |
| |
| out: |
| kfree_skb(skb); |
| } |
| |
| /* |
| * disc_conf messages are also called no_resources or no_link |
| * messages depending upon the "reason" field. |
| */ |
| static void dn_nsp_disc_conf(struct sock *sk, struct sk_buff *skb) |
| { |
| struct dn_scp *scp = DN_SK(sk); |
| unsigned short reason; |
| |
| if (skb->len != 2) |
| goto out; |
| |
| reason = le16_to_cpu(*(__le16 *)skb->data); |
| |
| sk->sk_state = TCP_CLOSE; |
| |
| switch (scp->state) { |
| case DN_CI: |
| scp->state = DN_NR; |
| break; |
| case DN_DR: |
| if (reason == NSP_REASON_DC) |
| scp->state = DN_DRC; |
| if (reason == NSP_REASON_NL) |
| scp->state = DN_CN; |
| break; |
| case DN_DI: |
| scp->state = DN_DIC; |
| break; |
| case DN_RUN: |
| sk->sk_shutdown |= SHUTDOWN_MASK; |
| /* fall through */ |
| case DN_CC: |
| scp->state = DN_CN; |
| } |
| |
| if (!sock_flag(sk, SOCK_DEAD)) { |
| if (sk->sk_socket->state != SS_UNCONNECTED) |
| sk->sk_socket->state = SS_DISCONNECTING; |
| sk->sk_state_change(sk); |
| } |
| |
| scp->persist_fxn = dn_destroy_timer; |
| scp->persist = dn_nsp_persist(sk); |
| |
| out: |
| kfree_skb(skb); |
| } |
| |
| static void dn_nsp_linkservice(struct sock *sk, struct sk_buff *skb) |
| { |
| struct dn_scp *scp = DN_SK(sk); |
| unsigned short segnum; |
| unsigned char lsflags; |
| signed char fcval; |
| int wake_up = 0; |
| char *ptr = skb->data; |
| unsigned char fctype = scp->services_rem & NSP_FC_MASK; |
| |
| if (skb->len != 4) |
| goto out; |
| |
| segnum = le16_to_cpu(*(__le16 *)ptr); |
| ptr += 2; |
| lsflags = *(unsigned char *)ptr++; |
| fcval = *ptr; |
| |
| /* |
| * Here we ignore erronous packets which should really |
| * should cause a connection abort. It is not critical |
| * for now though. |
| */ |
| if (lsflags & 0xf8) |
| goto out; |
| |
| if (seq_next(scp->numoth_rcv, segnum)) { |
| seq_add(&scp->numoth_rcv, 1); |
| switch(lsflags & 0x04) { /* FCVAL INT */ |
| case 0x00: /* Normal Request */ |
| switch(lsflags & 0x03) { /* FCVAL MOD */ |
| case 0x00: /* Request count */ |
| if (fcval < 0) { |
| unsigned char p_fcval = -fcval; |
| if ((scp->flowrem_dat > p_fcval) && |
| (fctype == NSP_FC_SCMC)) { |
| scp->flowrem_dat -= p_fcval; |
| } |
| } else if (fcval > 0) { |
| scp->flowrem_dat += fcval; |
| wake_up = 1; |
| } |
| break; |
| case 0x01: /* Stop outgoing data */ |
| scp->flowrem_sw = DN_DONTSEND; |
| break; |
| case 0x02: /* Ok to start again */ |
| scp->flowrem_sw = DN_SEND; |
| dn_nsp_output(sk); |
| wake_up = 1; |
| } |
| break; |
| case 0x04: /* Interrupt Request */ |
| if (fcval > 0) { |
| scp->flowrem_oth += fcval; |
| wake_up = 1; |
| } |
| break; |
| } |
| if (wake_up && !sock_flag(sk, SOCK_DEAD)) |
| sk->sk_state_change(sk); |
| } |
| |
| dn_nsp_send_oth_ack(sk); |
| |
| out: |
| kfree_skb(skb); |
| } |
| |
| /* |
| * Copy of sock_queue_rcv_skb (from sock.h) without |
| * bh_lock_sock() (its already held when this is called) which |
| * also allows data and other data to be queued to a socket. |
| */ |
| static __inline__ int dn_queue_skb(struct sock *sk, struct sk_buff *skb, int sig, struct sk_buff_head *queue) |
| { |
| int err; |
| |
| /* Cast skb->rcvbuf to unsigned... It's pointless, but reduces |
| number of warnings when compiling with -W --ANK |
| */ |
| if (atomic_read(&sk->sk_rmem_alloc) + skb->truesize >= |
| (unsigned int)sk->sk_rcvbuf) { |
| err = -ENOMEM; |
| goto out; |
| } |
| |
| err = sk_filter(sk, skb); |
| if (err) |
| goto out; |
| |
| skb_set_owner_r(skb, sk); |
| skb_queue_tail(queue, skb); |
| |
| if (!sock_flag(sk, SOCK_DEAD)) |
| sk->sk_data_ready(sk); |
| out: |
| return err; |
| } |
| |
| static void dn_nsp_otherdata(struct sock *sk, struct sk_buff *skb) |
| { |
| struct dn_scp *scp = DN_SK(sk); |
| unsigned short segnum; |
| struct dn_skb_cb *cb = DN_SKB_CB(skb); |
| int queued = 0; |
| |
| if (skb->len < 2) |
| goto out; |
| |
| cb->segnum = segnum = le16_to_cpu(*(__le16 *)skb->data); |
| skb_pull(skb, 2); |
| |
| if (seq_next(scp->numoth_rcv, segnum)) { |
| |
| if (dn_queue_skb(sk, skb, SIGURG, &scp->other_receive_queue) == 0) { |
| seq_add(&scp->numoth_rcv, 1); |
| scp->other_report = 0; |
| queued = 1; |
| } |
| } |
| |
| dn_nsp_send_oth_ack(sk); |
| out: |
| if (!queued) |
| kfree_skb(skb); |
| } |
| |
| static void dn_nsp_data(struct sock *sk, struct sk_buff *skb) |
| { |
| int queued = 0; |
| unsigned short segnum; |
| struct dn_skb_cb *cb = DN_SKB_CB(skb); |
| struct dn_scp *scp = DN_SK(sk); |
| |
| if (skb->len < 2) |
| goto out; |
| |
| cb->segnum = segnum = le16_to_cpu(*(__le16 *)skb->data); |
| skb_pull(skb, 2); |
| |
| if (seq_next(scp->numdat_rcv, segnum)) { |
| if (dn_queue_skb(sk, skb, SIGIO, &sk->sk_receive_queue) == 0) { |
| seq_add(&scp->numdat_rcv, 1); |
| queued = 1; |
| } |
| |
| if ((scp->flowloc_sw == DN_SEND) && dn_congested(sk)) { |
| scp->flowloc_sw = DN_DONTSEND; |
| dn_nsp_send_link(sk, DN_DONTSEND, 0); |
| } |
| } |
| |
| dn_nsp_send_data_ack(sk); |
| out: |
| if (!queued) |
| kfree_skb(skb); |
| } |
| |
| /* |
| * If one of our conninit messages is returned, this function |
| * deals with it. It puts the socket into the NO_COMMUNICATION |
| * state. |
| */ |
| static void dn_returned_conn_init(struct sock *sk, struct sk_buff *skb) |
| { |
| struct dn_scp *scp = DN_SK(sk); |
| |
| if (scp->state == DN_CI) { |
| scp->state = DN_NC; |
| sk->sk_state = TCP_CLOSE; |
| if (!sock_flag(sk, SOCK_DEAD)) |
| sk->sk_state_change(sk); |
| } |
| |
| kfree_skb(skb); |
| } |
| |
| static int dn_nsp_no_socket(struct sk_buff *skb, unsigned short reason) |
| { |
| struct dn_skb_cb *cb = DN_SKB_CB(skb); |
| int ret = NET_RX_DROP; |
| |
| /* Must not reply to returned packets */ |
| if (cb->rt_flags & DN_RT_F_RTS) |
| goto out; |
| |
| if ((reason != NSP_REASON_OK) && ((cb->nsp_flags & 0x0c) == 0x08)) { |
| switch (cb->nsp_flags & 0x70) { |
| case 0x10: |
| case 0x60: /* (Retransmitted) Connect Init */ |
| dn_nsp_return_disc(skb, NSP_DISCINIT, reason); |
| ret = NET_RX_SUCCESS; |
| break; |
| case 0x20: /* Connect Confirm */ |
| dn_nsp_return_disc(skb, NSP_DISCCONF, reason); |
| ret = NET_RX_SUCCESS; |
| break; |
| } |
| } |
| |
| out: |
| kfree_skb(skb); |
| return ret; |
| } |
| |
| static int dn_nsp_rx_packet(struct net *net, struct sock *sk2, |
| struct sk_buff *skb) |
| { |
| struct dn_skb_cb *cb = DN_SKB_CB(skb); |
| struct sock *sk = NULL; |
| unsigned char *ptr = (unsigned char *)skb->data; |
| unsigned short reason = NSP_REASON_NL; |
| |
| if (!pskb_may_pull(skb, 2)) |
| goto free_out; |
| |
| skb_reset_transport_header(skb); |
| cb->nsp_flags = *ptr++; |
| |
| if (decnet_debug_level & 2) |
| printk(KERN_DEBUG "dn_nsp_rx: Message type 0x%02x\n", (int)cb->nsp_flags); |
| |
| if (cb->nsp_flags & 0x83) |
| goto free_out; |
| |
| /* |
| * Filter out conninits and useless packet types |
| */ |
| if ((cb->nsp_flags & 0x0c) == 0x08) { |
| switch (cb->nsp_flags & 0x70) { |
| case 0x00: /* NOP */ |
| case 0x70: /* Reserved */ |
| case 0x50: /* Reserved, Phase II node init */ |
| goto free_out; |
| case 0x10: |
| case 0x60: |
| if (unlikely(cb->rt_flags & DN_RT_F_RTS)) |
| goto free_out; |
| sk = dn_find_listener(skb, &reason); |
| goto got_it; |
| } |
| } |
| |
| if (!pskb_may_pull(skb, 3)) |
| goto free_out; |
| |
| /* |
| * Grab the destination address. |
| */ |
| cb->dst_port = *(__le16 *)ptr; |
| cb->src_port = 0; |
| ptr += 2; |
| |
| /* |
| * If not a connack, grab the source address too. |
| */ |
| if (pskb_may_pull(skb, 5)) { |
| cb->src_port = *(__le16 *)ptr; |
| ptr += 2; |
| skb_pull(skb, 5); |
| } |
| |
| /* |
| * Returned packets... |
| * Swap src & dst and look up in the normal way. |
| */ |
| if (unlikely(cb->rt_flags & DN_RT_F_RTS)) { |
| swap(cb->dst_port, cb->src_port); |
| swap(cb->dst, cb->src); |
| } |
| |
| /* |
| * Find the socket to which this skb is destined. |
| */ |
| sk = dn_find_by_skb(skb); |
| got_it: |
| if (sk != NULL) { |
| struct dn_scp *scp = DN_SK(sk); |
| |
| /* Reset backoff */ |
| scp->nsp_rxtshift = 0; |
| |
| /* |
| * We linearize everything except data segments here. |
| */ |
| if (cb->nsp_flags & ~0x60) { |
| if (unlikely(skb_linearize(skb))) |
| goto free_out; |
| } |
| |
| return sk_receive_skb(sk, skb, 0); |
| } |
| |
| return dn_nsp_no_socket(skb, reason); |
| |
| free_out: |
| kfree_skb(skb); |
| return NET_RX_DROP; |
| } |
| |
| int dn_nsp_rx(struct sk_buff *skb) |
| { |
| return NF_HOOK(NFPROTO_DECNET, NF_DN_LOCAL_IN, |
| &init_net, NULL, skb, skb->dev, NULL, |
| dn_nsp_rx_packet); |
| } |
| |
| /* |
| * This is the main receive routine for sockets. It is called |
| * from the above when the socket is not busy, and also from |
| * sock_release() when there is a backlog queued up. |
| */ |
| int dn_nsp_backlog_rcv(struct sock *sk, struct sk_buff *skb) |
| { |
| struct dn_scp *scp = DN_SK(sk); |
| struct dn_skb_cb *cb = DN_SKB_CB(skb); |
| |
| if (cb->rt_flags & DN_RT_F_RTS) { |
| if (cb->nsp_flags == 0x18 || cb->nsp_flags == 0x68) |
| dn_returned_conn_init(sk, skb); |
| else |
| kfree_skb(skb); |
| return NET_RX_SUCCESS; |
| } |
| |
| /* |
| * Control packet. |
| */ |
| if ((cb->nsp_flags & 0x0c) == 0x08) { |
| switch (cb->nsp_flags & 0x70) { |
| case 0x10: |
| case 0x60: |
| dn_nsp_conn_init(sk, skb); |
| break; |
| case 0x20: |
| dn_nsp_conn_conf(sk, skb); |
| break; |
| case 0x30: |
| dn_nsp_disc_init(sk, skb); |
| break; |
| case 0x40: |
| dn_nsp_disc_conf(sk, skb); |
| break; |
| } |
| |
| } else if (cb->nsp_flags == 0x24) { |
| /* |
| * Special for connacks, 'cos they don't have |
| * ack data or ack otherdata info. |
| */ |
| dn_nsp_conn_ack(sk, skb); |
| } else { |
| int other = 1; |
| |
| /* both data and ack frames can kick a CC socket into RUN */ |
| if ((scp->state == DN_CC) && !sock_flag(sk, SOCK_DEAD)) { |
| scp->state = DN_RUN; |
| sk->sk_state = TCP_ESTABLISHED; |
| sk->sk_state_change(sk); |
| } |
| |
| if ((cb->nsp_flags & 0x1c) == 0) |
| other = 0; |
| if (cb->nsp_flags == 0x04) |
| other = 0; |
| |
| /* |
| * Read out ack data here, this applies equally |
| * to data, other data, link serivce and both |
| * ack data and ack otherdata. |
| */ |
| dn_process_ack(sk, skb, other); |
| |
| /* |
| * If we've some sort of data here then call a |
| * suitable routine for dealing with it, otherwise |
| * the packet is an ack and can be discarded. |
| */ |
| if ((cb->nsp_flags & 0x0c) == 0) { |
| |
| if (scp->state != DN_RUN) |
| goto free_out; |
| |
| switch (cb->nsp_flags) { |
| case 0x10: /* LS */ |
| dn_nsp_linkservice(sk, skb); |
| break; |
| case 0x30: /* OD */ |
| dn_nsp_otherdata(sk, skb); |
| break; |
| default: |
| dn_nsp_data(sk, skb); |
| } |
| |
| } else { /* Ack, chuck it out here */ |
| free_out: |
| kfree_skb(skb); |
| } |
| } |
| |
| return NET_RX_SUCCESS; |
| } |