| // SPDX-License-Identifier: GPL-2.0 |
| /* |
| * linux/fs/ext4/indirect.c |
| * |
| * from |
| * |
| * linux/fs/ext4/inode.c |
| * |
| * Copyright (C) 1992, 1993, 1994, 1995 |
| * Remy Card (card@masi.ibp.fr) |
| * Laboratoire MASI - Institut Blaise Pascal |
| * Universite Pierre et Marie Curie (Paris VI) |
| * |
| * from |
| * |
| * linux/fs/minix/inode.c |
| * |
| * Copyright (C) 1991, 1992 Linus Torvalds |
| * |
| * Goal-directed block allocation by Stephen Tweedie |
| * (sct@redhat.com), 1993, 1998 |
| */ |
| |
| #include "ext4_jbd2.h" |
| #include "truncate.h" |
| #include <linux/dax.h> |
| #include <linux/uio.h> |
| |
| #include <trace/events/ext4.h> |
| |
| typedef struct { |
| __le32 *p; |
| __le32 key; |
| struct buffer_head *bh; |
| } Indirect; |
| |
| static inline void add_chain(Indirect *p, struct buffer_head *bh, __le32 *v) |
| { |
| p->key = *(p->p = v); |
| p->bh = bh; |
| } |
| |
| /** |
| * ext4_block_to_path - parse the block number into array of offsets |
| * @inode: inode in question (we are only interested in its superblock) |
| * @i_block: block number to be parsed |
| * @offsets: array to store the offsets in |
| * @boundary: set this non-zero if the referred-to block is likely to be |
| * followed (on disk) by an indirect block. |
| * |
| * To store the locations of file's data ext4 uses a data structure common |
| * for UNIX filesystems - tree of pointers anchored in the inode, with |
| * data blocks at leaves and indirect blocks in intermediate nodes. |
| * This function translates the block number into path in that tree - |
| * return value is the path length and @offsets[n] is the offset of |
| * pointer to (n+1)th node in the nth one. If @block is out of range |
| * (negative or too large) warning is printed and zero returned. |
| * |
| * Note: function doesn't find node addresses, so no IO is needed. All |
| * we need to know is the capacity of indirect blocks (taken from the |
| * inode->i_sb). |
| */ |
| |
| /* |
| * Portability note: the last comparison (check that we fit into triple |
| * indirect block) is spelled differently, because otherwise on an |
| * architecture with 32-bit longs and 8Kb pages we might get into trouble |
| * if our filesystem had 8Kb blocks. We might use long long, but that would |
| * kill us on x86. Oh, well, at least the sign propagation does not matter - |
| * i_block would have to be negative in the very beginning, so we would not |
| * get there at all. |
| */ |
| |
| static int ext4_block_to_path(struct inode *inode, |
| ext4_lblk_t i_block, |
| ext4_lblk_t offsets[4], int *boundary) |
| { |
| int ptrs = EXT4_ADDR_PER_BLOCK(inode->i_sb); |
| int ptrs_bits = EXT4_ADDR_PER_BLOCK_BITS(inode->i_sb); |
| const long direct_blocks = EXT4_NDIR_BLOCKS, |
| indirect_blocks = ptrs, |
| double_blocks = (1 << (ptrs_bits * 2)); |
| int n = 0; |
| int final = 0; |
| |
| if (i_block < direct_blocks) { |
| offsets[n++] = i_block; |
| final = direct_blocks; |
| } else if ((i_block -= direct_blocks) < indirect_blocks) { |
| offsets[n++] = EXT4_IND_BLOCK; |
| offsets[n++] = i_block; |
| final = ptrs; |
| } else if ((i_block -= indirect_blocks) < double_blocks) { |
| offsets[n++] = EXT4_DIND_BLOCK; |
| offsets[n++] = i_block >> ptrs_bits; |
| offsets[n++] = i_block & (ptrs - 1); |
| final = ptrs; |
| } else if (((i_block -= double_blocks) >> (ptrs_bits * 2)) < ptrs) { |
| offsets[n++] = EXT4_TIND_BLOCK; |
| offsets[n++] = i_block >> (ptrs_bits * 2); |
| offsets[n++] = (i_block >> ptrs_bits) & (ptrs - 1); |
| offsets[n++] = i_block & (ptrs - 1); |
| final = ptrs; |
| } else { |
| ext4_warning(inode->i_sb, "block %lu > max in inode %lu", |
| i_block + direct_blocks + |
| indirect_blocks + double_blocks, inode->i_ino); |
| } |
| if (boundary) |
| *boundary = final - 1 - (i_block & (ptrs - 1)); |
| return n; |
| } |
| |
| /** |
| * ext4_get_branch - read the chain of indirect blocks leading to data |
| * @inode: inode in question |
| * @depth: depth of the chain (1 - direct pointer, etc.) |
| * @offsets: offsets of pointers in inode/indirect blocks |
| * @chain: place to store the result |
| * @err: here we store the error value |
| * |
| * Function fills the array of triples <key, p, bh> and returns %NULL |
| * if everything went OK or the pointer to the last filled triple |
| * (incomplete one) otherwise. Upon the return chain[i].key contains |
| * the number of (i+1)-th block in the chain (as it is stored in memory, |
| * i.e. little-endian 32-bit), chain[i].p contains the address of that |
| * number (it points into struct inode for i==0 and into the bh->b_data |
| * for i>0) and chain[i].bh points to the buffer_head of i-th indirect |
| * block for i>0 and NULL for i==0. In other words, it holds the block |
| * numbers of the chain, addresses they were taken from (and where we can |
| * verify that chain did not change) and buffer_heads hosting these |
| * numbers. |
| * |
| * Function stops when it stumbles upon zero pointer (absent block) |
| * (pointer to last triple returned, *@err == 0) |
| * or when it gets an IO error reading an indirect block |
| * (ditto, *@err == -EIO) |
| * or when it reads all @depth-1 indirect blocks successfully and finds |
| * the whole chain, all way to the data (returns %NULL, *err == 0). |
| * |
| * Need to be called with |
| * down_read(&EXT4_I(inode)->i_data_sem) |
| */ |
| static Indirect *ext4_get_branch(struct inode *inode, int depth, |
| ext4_lblk_t *offsets, |
| Indirect chain[4], int *err) |
| { |
| struct super_block *sb = inode->i_sb; |
| Indirect *p = chain; |
| struct buffer_head *bh; |
| int ret = -EIO; |
| |
| *err = 0; |
| /* i_data is not going away, no lock needed */ |
| add_chain(chain, NULL, EXT4_I(inode)->i_data + *offsets); |
| if (!p->key) |
| goto no_block; |
| while (--depth) { |
| bh = sb_getblk(sb, le32_to_cpu(p->key)); |
| if (unlikely(!bh)) { |
| ret = -ENOMEM; |
| goto failure; |
| } |
| |
| if (!bh_uptodate_or_lock(bh)) { |
| if (bh_submit_read(bh) < 0) { |
| put_bh(bh); |
| goto failure; |
| } |
| /* validate block references */ |
| if (ext4_check_indirect_blockref(inode, bh)) { |
| put_bh(bh); |
| goto failure; |
| } |
| } |
| |
| add_chain(++p, bh, (__le32 *)bh->b_data + *++offsets); |
| /* Reader: end */ |
| if (!p->key) |
| goto no_block; |
| } |
| return NULL; |
| |
| failure: |
| *err = ret; |
| no_block: |
| return p; |
| } |
| |
| /** |
| * ext4_find_near - find a place for allocation with sufficient locality |
| * @inode: owner |
| * @ind: descriptor of indirect block. |
| * |
| * This function returns the preferred place for block allocation. |
| * It is used when heuristic for sequential allocation fails. |
| * Rules are: |
| * + if there is a block to the left of our position - allocate near it. |
| * + if pointer will live in indirect block - allocate near that block. |
| * + if pointer will live in inode - allocate in the same |
| * cylinder group. |
| * |
| * In the latter case we colour the starting block by the callers PID to |
| * prevent it from clashing with concurrent allocations for a different inode |
| * in the same block group. The PID is used here so that functionally related |
| * files will be close-by on-disk. |
| * |
| * Caller must make sure that @ind is valid and will stay that way. |
| */ |
| static ext4_fsblk_t ext4_find_near(struct inode *inode, Indirect *ind) |
| { |
| struct ext4_inode_info *ei = EXT4_I(inode); |
| __le32 *start = ind->bh ? (__le32 *) ind->bh->b_data : ei->i_data; |
| __le32 *p; |
| |
| /* Try to find previous block */ |
| for (p = ind->p - 1; p >= start; p--) { |
| if (*p) |
| return le32_to_cpu(*p); |
| } |
| |
| /* No such thing, so let's try location of indirect block */ |
| if (ind->bh) |
| return ind->bh->b_blocknr; |
| |
| /* |
| * It is going to be referred to from the inode itself? OK, just put it |
| * into the same cylinder group then. |
| */ |
| return ext4_inode_to_goal_block(inode); |
| } |
| |
| /** |
| * ext4_find_goal - find a preferred place for allocation. |
| * @inode: owner |
| * @block: block we want |
| * @partial: pointer to the last triple within a chain |
| * |
| * Normally this function find the preferred place for block allocation, |
| * returns it. |
| * Because this is only used for non-extent files, we limit the block nr |
| * to 32 bits. |
| */ |
| static ext4_fsblk_t ext4_find_goal(struct inode *inode, ext4_lblk_t block, |
| Indirect *partial) |
| { |
| ext4_fsblk_t goal; |
| |
| /* |
| * XXX need to get goal block from mballoc's data structures |
| */ |
| |
| goal = ext4_find_near(inode, partial); |
| goal = goal & EXT4_MAX_BLOCK_FILE_PHYS; |
| return goal; |
| } |
| |
| /** |
| * ext4_blks_to_allocate - Look up the block map and count the number |
| * of direct blocks need to be allocated for the given branch. |
| * |
| * @branch: chain of indirect blocks |
| * @k: number of blocks need for indirect blocks |
| * @blks: number of data blocks to be mapped. |
| * @blocks_to_boundary: the offset in the indirect block |
| * |
| * return the total number of blocks to be allocate, including the |
| * direct and indirect blocks. |
| */ |
| static int ext4_blks_to_allocate(Indirect *branch, int k, unsigned int blks, |
| int blocks_to_boundary) |
| { |
| unsigned int count = 0; |
| |
| /* |
| * Simple case, [t,d]Indirect block(s) has not allocated yet |
| * then it's clear blocks on that path have not allocated |
| */ |
| if (k > 0) { |
| /* right now we don't handle cross boundary allocation */ |
| if (blks < blocks_to_boundary + 1) |
| count += blks; |
| else |
| count += blocks_to_boundary + 1; |
| return count; |
| } |
| |
| count++; |
| while (count < blks && count <= blocks_to_boundary && |
| le32_to_cpu(*(branch[0].p + count)) == 0) { |
| count++; |
| } |
| return count; |
| } |
| |
| /** |
| * ext4_alloc_branch() - allocate and set up a chain of blocks |
| * @handle: handle for this transaction |
| * @ar: structure describing the allocation request |
| * @indirect_blks: number of allocated indirect blocks |
| * @offsets: offsets (in the blocks) to store the pointers to next. |
| * @branch: place to store the chain in. |
| * |
| * This function allocates blocks, zeroes out all but the last one, |
| * links them into chain and (if we are synchronous) writes them to disk. |
| * In other words, it prepares a branch that can be spliced onto the |
| * inode. It stores the information about that chain in the branch[], in |
| * the same format as ext4_get_branch() would do. We are calling it after |
| * we had read the existing part of chain and partial points to the last |
| * triple of that (one with zero ->key). Upon the exit we have the same |
| * picture as after the successful ext4_get_block(), except that in one |
| * place chain is disconnected - *branch->p is still zero (we did not |
| * set the last link), but branch->key contains the number that should |
| * be placed into *branch->p to fill that gap. |
| * |
| * If allocation fails we free all blocks we've allocated (and forget |
| * their buffer_heads) and return the error value the from failed |
| * ext4_alloc_block() (normally -ENOSPC). Otherwise we set the chain |
| * as described above and return 0. |
| */ |
| static int ext4_alloc_branch(handle_t *handle, |
| struct ext4_allocation_request *ar, |
| int indirect_blks, ext4_lblk_t *offsets, |
| Indirect *branch) |
| { |
| struct buffer_head * bh; |
| ext4_fsblk_t b, new_blocks[4]; |
| __le32 *p; |
| int i, j, err, len = 1; |
| |
| for (i = 0; i <= indirect_blks; i++) { |
| if (i == indirect_blks) { |
| new_blocks[i] = ext4_mb_new_blocks(handle, ar, &err); |
| } else { |
| ar->goal = new_blocks[i] = ext4_new_meta_blocks(handle, |
| ar->inode, ar->goal, |
| ar->flags & EXT4_MB_DELALLOC_RESERVED, |
| NULL, &err); |
| /* Simplify error cleanup... */ |
| branch[i+1].bh = NULL; |
| } |
| if (err) { |
| i--; |
| goto failed; |
| } |
| branch[i].key = cpu_to_le32(new_blocks[i]); |
| if (i == 0) |
| continue; |
| |
| bh = branch[i].bh = sb_getblk(ar->inode->i_sb, new_blocks[i-1]); |
| if (unlikely(!bh)) { |
| err = -ENOMEM; |
| goto failed; |
| } |
| lock_buffer(bh); |
| BUFFER_TRACE(bh, "call get_create_access"); |
| err = ext4_journal_get_create_access(handle, bh); |
| if (err) { |
| unlock_buffer(bh); |
| goto failed; |
| } |
| |
| memset(bh->b_data, 0, bh->b_size); |
| p = branch[i].p = (__le32 *) bh->b_data + offsets[i]; |
| b = new_blocks[i]; |
| |
| if (i == indirect_blks) |
| len = ar->len; |
| for (j = 0; j < len; j++) |
| *p++ = cpu_to_le32(b++); |
| |
| BUFFER_TRACE(bh, "marking uptodate"); |
| set_buffer_uptodate(bh); |
| unlock_buffer(bh); |
| |
| BUFFER_TRACE(bh, "call ext4_handle_dirty_metadata"); |
| err = ext4_handle_dirty_metadata(handle, ar->inode, bh); |
| if (err) |
| goto failed; |
| } |
| return 0; |
| failed: |
| if (i == indirect_blks) { |
| /* Free data blocks */ |
| ext4_free_blocks(handle, ar->inode, NULL, new_blocks[i], |
| ar->len, 0); |
| i--; |
| } |
| for (; i >= 0; i--) { |
| /* |
| * We want to ext4_forget() only freshly allocated indirect |
| * blocks. Buffer for new_blocks[i] is at branch[i+1].bh |
| * (buffer at branch[0].bh is indirect block / inode already |
| * existing before ext4_alloc_branch() was called). Also |
| * because blocks are freshly allocated, we don't need to |
| * revoke them which is why we don't set |
| * EXT4_FREE_BLOCKS_METADATA. |
| */ |
| ext4_free_blocks(handle, ar->inode, branch[i+1].bh, |
| new_blocks[i], 1, |
| branch[i+1].bh ? EXT4_FREE_BLOCKS_FORGET : 0); |
| } |
| return err; |
| } |
| |
| /** |
| * ext4_splice_branch() - splice the allocated branch onto inode. |
| * @handle: handle for this transaction |
| * @ar: structure describing the allocation request |
| * @where: location of missing link |
| * @num: number of indirect blocks we are adding |
| * |
| * This function fills the missing link and does all housekeeping needed in |
| * inode (->i_blocks, etc.). In case of success we end up with the full |
| * chain to new block and return 0. |
| */ |
| static int ext4_splice_branch(handle_t *handle, |
| struct ext4_allocation_request *ar, |
| Indirect *where, int num) |
| { |
| int i; |
| int err = 0; |
| ext4_fsblk_t current_block; |
| |
| /* |
| * If we're splicing into a [td]indirect block (as opposed to the |
| * inode) then we need to get write access to the [td]indirect block |
| * before the splice. |
| */ |
| if (where->bh) { |
| BUFFER_TRACE(where->bh, "get_write_access"); |
| err = ext4_journal_get_write_access(handle, where->bh); |
| if (err) |
| goto err_out; |
| } |
| /* That's it */ |
| |
| *where->p = where->key; |
| |
| /* |
| * Update the host buffer_head or inode to point to more just allocated |
| * direct blocks blocks |
| */ |
| if (num == 0 && ar->len > 1) { |
| current_block = le32_to_cpu(where->key) + 1; |
| for (i = 1; i < ar->len; i++) |
| *(where->p + i) = cpu_to_le32(current_block++); |
| } |
| |
| /* We are done with atomic stuff, now do the rest of housekeeping */ |
| /* had we spliced it onto indirect block? */ |
| if (where->bh) { |
| /* |
| * If we spliced it onto an indirect block, we haven't |
| * altered the inode. Note however that if it is being spliced |
| * onto an indirect block at the very end of the file (the |
| * file is growing) then we *will* alter the inode to reflect |
| * the new i_size. But that is not done here - it is done in |
| * generic_commit_write->__mark_inode_dirty->ext4_dirty_inode. |
| */ |
| jbd_debug(5, "splicing indirect only\n"); |
| BUFFER_TRACE(where->bh, "call ext4_handle_dirty_metadata"); |
| err = ext4_handle_dirty_metadata(handle, ar->inode, where->bh); |
| if (err) |
| goto err_out; |
| } else { |
| /* |
| * OK, we spliced it into the inode itself on a direct block. |
| */ |
| ext4_mark_inode_dirty(handle, ar->inode); |
| jbd_debug(5, "splicing direct\n"); |
| } |
| return err; |
| |
| err_out: |
| for (i = 1; i <= num; i++) { |
| /* |
| * branch[i].bh is newly allocated, so there is no |
| * need to revoke the block, which is why we don't |
| * need to set EXT4_FREE_BLOCKS_METADATA. |
| */ |
| ext4_free_blocks(handle, ar->inode, where[i].bh, 0, 1, |
| EXT4_FREE_BLOCKS_FORGET); |
| } |
| ext4_free_blocks(handle, ar->inode, NULL, le32_to_cpu(where[num].key), |
| ar->len, 0); |
| |
| return err; |
| } |
| |
| /* |
| * The ext4_ind_map_blocks() function handles non-extents inodes |
| * (i.e., using the traditional indirect/double-indirect i_blocks |
| * scheme) for ext4_map_blocks(). |
| * |
| * Allocation strategy is simple: if we have to allocate something, we will |
| * have to go the whole way to leaf. So let's do it before attaching anything |
| * to tree, set linkage between the newborn blocks, write them if sync is |
| * required, recheck the path, free and repeat if check fails, otherwise |
| * set the last missing link (that will protect us from any truncate-generated |
| * removals - all blocks on the path are immune now) and possibly force the |
| * write on the parent block. |
| * That has a nice additional property: no special recovery from the failed |
| * allocations is needed - we simply release blocks and do not touch anything |
| * reachable from inode. |
| * |
| * `handle' can be NULL if create == 0. |
| * |
| * return > 0, # of blocks mapped or allocated. |
| * return = 0, if plain lookup failed. |
| * return < 0, error case. |
| * |
| * The ext4_ind_get_blocks() function should be called with |
| * down_write(&EXT4_I(inode)->i_data_sem) if allocating filesystem |
| * blocks (i.e., flags has EXT4_GET_BLOCKS_CREATE set) or |
| * down_read(&EXT4_I(inode)->i_data_sem) if not allocating file system |
| * blocks. |
| */ |
| int ext4_ind_map_blocks(handle_t *handle, struct inode *inode, |
| struct ext4_map_blocks *map, |
| int flags) |
| { |
| struct ext4_allocation_request ar; |
| int err = -EIO; |
| ext4_lblk_t offsets[4]; |
| Indirect chain[4]; |
| Indirect *partial; |
| int indirect_blks; |
| int blocks_to_boundary = 0; |
| int depth; |
| int count = 0; |
| ext4_fsblk_t first_block = 0; |
| |
| trace_ext4_ind_map_blocks_enter(inode, map->m_lblk, map->m_len, flags); |
| J_ASSERT(!(ext4_test_inode_flag(inode, EXT4_INODE_EXTENTS))); |
| J_ASSERT(handle != NULL || (flags & EXT4_GET_BLOCKS_CREATE) == 0); |
| depth = ext4_block_to_path(inode, map->m_lblk, offsets, |
| &blocks_to_boundary); |
| |
| if (depth == 0) |
| goto out; |
| |
| partial = ext4_get_branch(inode, depth, offsets, chain, &err); |
| |
| /* Simplest case - block found, no allocation needed */ |
| if (!partial) { |
| first_block = le32_to_cpu(chain[depth - 1].key); |
| count++; |
| /*map more blocks*/ |
| while (count < map->m_len && count <= blocks_to_boundary) { |
| ext4_fsblk_t blk; |
| |
| blk = le32_to_cpu(*(chain[depth-1].p + count)); |
| |
| if (blk == first_block + count) |
| count++; |
| else |
| break; |
| } |
| goto got_it; |
| } |
| |
| /* Next simple case - plain lookup failed */ |
| if ((flags & EXT4_GET_BLOCKS_CREATE) == 0) { |
| unsigned epb = inode->i_sb->s_blocksize / sizeof(u32); |
| int i; |
| |
| /* |
| * Count number blocks in a subtree under 'partial'. At each |
| * level we count number of complete empty subtrees beyond |
| * current offset and then descend into the subtree only |
| * partially beyond current offset. |
| */ |
| count = 0; |
| for (i = partial - chain + 1; i < depth; i++) |
| count = count * epb + (epb - offsets[i] - 1); |
| count++; |
| /* Fill in size of a hole we found */ |
| map->m_pblk = 0; |
| map->m_len = min_t(unsigned int, map->m_len, count); |
| goto cleanup; |
| } |
| |
| /* Failed read of indirect block */ |
| if (err == -EIO) |
| goto cleanup; |
| |
| /* |
| * Okay, we need to do block allocation. |
| */ |
| if (ext4_has_feature_bigalloc(inode->i_sb)) { |
| EXT4_ERROR_INODE(inode, "Can't allocate blocks for " |
| "non-extent mapped inodes with bigalloc"); |
| return -EFSCORRUPTED; |
| } |
| |
| /* Set up for the direct block allocation */ |
| memset(&ar, 0, sizeof(ar)); |
| ar.inode = inode; |
| ar.logical = map->m_lblk; |
| if (S_ISREG(inode->i_mode)) |
| ar.flags = EXT4_MB_HINT_DATA; |
| if (flags & EXT4_GET_BLOCKS_DELALLOC_RESERVE) |
| ar.flags |= EXT4_MB_DELALLOC_RESERVED; |
| if (flags & EXT4_GET_BLOCKS_METADATA_NOFAIL) |
| ar.flags |= EXT4_MB_USE_RESERVED; |
| |
| ar.goal = ext4_find_goal(inode, map->m_lblk, partial); |
| |
| /* the number of blocks need to allocate for [d,t]indirect blocks */ |
| indirect_blks = (chain + depth) - partial - 1; |
| |
| /* |
| * Next look up the indirect map to count the totoal number of |
| * direct blocks to allocate for this branch. |
| */ |
| ar.len = ext4_blks_to_allocate(partial, indirect_blks, |
| map->m_len, blocks_to_boundary); |
| |
| /* |
| * Block out ext4_truncate while we alter the tree |
| */ |
| err = ext4_alloc_branch(handle, &ar, indirect_blks, |
| offsets + (partial - chain), partial); |
| |
| /* |
| * The ext4_splice_branch call will free and forget any buffers |
| * on the new chain if there is a failure, but that risks using |
| * up transaction credits, especially for bitmaps where the |
| * credits cannot be returned. Can we handle this somehow? We |
| * may need to return -EAGAIN upwards in the worst case. --sct |
| */ |
| if (!err) |
| err = ext4_splice_branch(handle, &ar, partial, indirect_blks); |
| if (err) |
| goto cleanup; |
| |
| map->m_flags |= EXT4_MAP_NEW; |
| |
| ext4_update_inode_fsync_trans(handle, inode, 1); |
| count = ar.len; |
| got_it: |
| map->m_flags |= EXT4_MAP_MAPPED; |
| map->m_pblk = le32_to_cpu(chain[depth-1].key); |
| map->m_len = count; |
| if (count > blocks_to_boundary) |
| map->m_flags |= EXT4_MAP_BOUNDARY; |
| err = count; |
| /* Clean up and exit */ |
| partial = chain + depth - 1; /* the whole chain */ |
| cleanup: |
| while (partial > chain) { |
| BUFFER_TRACE(partial->bh, "call brelse"); |
| brelse(partial->bh); |
| partial--; |
| } |
| out: |
| trace_ext4_ind_map_blocks_exit(inode, flags, map, err); |
| return err; |
| } |
| |
| /* |
| * Calculate number of indirect blocks touched by mapping @nrblocks logically |
| * contiguous blocks |
| */ |
| int ext4_ind_trans_blocks(struct inode *inode, int nrblocks) |
| { |
| /* |
| * With N contiguous data blocks, we need at most |
| * N/EXT4_ADDR_PER_BLOCK(inode->i_sb) + 1 indirect blocks, |
| * 2 dindirect blocks, and 1 tindirect block |
| */ |
| return DIV_ROUND_UP(nrblocks, EXT4_ADDR_PER_BLOCK(inode->i_sb)) + 4; |
| } |
| |
| static int ext4_ind_trunc_restart_fn(handle_t *handle, struct inode *inode, |
| struct buffer_head *bh, int *dropped) |
| { |
| int err; |
| |
| if (bh) { |
| BUFFER_TRACE(bh, "call ext4_handle_dirty_metadata"); |
| err = ext4_handle_dirty_metadata(handle, inode, bh); |
| if (unlikely(err)) |
| return err; |
| } |
| err = ext4_mark_inode_dirty(handle, inode); |
| if (unlikely(err)) |
| return err; |
| /* |
| * Drop i_data_sem to avoid deadlock with ext4_map_blocks. At this |
| * moment, get_block can be called only for blocks inside i_size since |
| * page cache has been already dropped and writes are blocked by |
| * i_mutex. So we can safely drop the i_data_sem here. |
| */ |
| BUG_ON(EXT4_JOURNAL(inode) == NULL); |
| ext4_discard_preallocations(inode); |
| up_write(&EXT4_I(inode)->i_data_sem); |
| *dropped = 1; |
| return 0; |
| } |
| |
| /* |
| * Truncate transactions can be complex and absolutely huge. So we need to |
| * be able to restart the transaction at a conventient checkpoint to make |
| * sure we don't overflow the journal. |
| * |
| * Try to extend this transaction for the purposes of truncation. If |
| * extend fails, we restart transaction. |
| */ |
| static int ext4_ind_truncate_ensure_credits(handle_t *handle, |
| struct inode *inode, |
| struct buffer_head *bh, |
| int revoke_creds) |
| { |
| int ret; |
| int dropped = 0; |
| |
| ret = ext4_journal_ensure_credits_fn(handle, EXT4_RESERVE_TRANS_BLOCKS, |
| ext4_blocks_for_truncate(inode), revoke_creds, |
| ext4_ind_trunc_restart_fn(handle, inode, bh, &dropped)); |
| if (dropped) |
| down_write(&EXT4_I(inode)->i_data_sem); |
| if (ret <= 0) |
| return ret; |
| if (bh) { |
| BUFFER_TRACE(bh, "retaking write access"); |
| ret = ext4_journal_get_write_access(handle, bh); |
| if (unlikely(ret)) |
| return ret; |
| } |
| return 0; |
| } |
| |
| /* |
| * Probably it should be a library function... search for first non-zero word |
| * or memcmp with zero_page, whatever is better for particular architecture. |
| * Linus? |
| */ |
| static inline int all_zeroes(__le32 *p, __le32 *q) |
| { |
| while (p < q) |
| if (*p++) |
| return 0; |
| return 1; |
| } |
| |
| /** |
| * ext4_find_shared - find the indirect blocks for partial truncation. |
| * @inode: inode in question |
| * @depth: depth of the affected branch |
| * @offsets: offsets of pointers in that branch (see ext4_block_to_path) |
| * @chain: place to store the pointers to partial indirect blocks |
| * @top: place to the (detached) top of branch |
| * |
| * This is a helper function used by ext4_truncate(). |
| * |
| * When we do truncate() we may have to clean the ends of several |
| * indirect blocks but leave the blocks themselves alive. Block is |
| * partially truncated if some data below the new i_size is referred |
| * from it (and it is on the path to the first completely truncated |
| * data block, indeed). We have to free the top of that path along |
| * with everything to the right of the path. Since no allocation |
| * past the truncation point is possible until ext4_truncate() |
| * finishes, we may safely do the latter, but top of branch may |
| * require special attention - pageout below the truncation point |
| * might try to populate it. |
| * |
| * We atomically detach the top of branch from the tree, store the |
| * block number of its root in *@top, pointers to buffer_heads of |
| * partially truncated blocks - in @chain[].bh and pointers to |
| * their last elements that should not be removed - in |
| * @chain[].p. Return value is the pointer to last filled element |
| * of @chain. |
| * |
| * The work left to caller to do the actual freeing of subtrees: |
| * a) free the subtree starting from *@top |
| * b) free the subtrees whose roots are stored in |
| * (@chain[i].p+1 .. end of @chain[i].bh->b_data) |
| * c) free the subtrees growing from the inode past the @chain[0]. |
| * (no partially truncated stuff there). */ |
| |
| static Indirect *ext4_find_shared(struct inode *inode, int depth, |
| ext4_lblk_t offsets[4], Indirect chain[4], |
| __le32 *top) |
| { |
| Indirect *partial, *p; |
| int k, err; |
| |
| *top = 0; |
| /* Make k index the deepest non-null offset + 1 */ |
| for (k = depth; k > 1 && !offsets[k-1]; k--) |
| ; |
| partial = ext4_get_branch(inode, k, offsets, chain, &err); |
| /* Writer: pointers */ |
| if (!partial) |
| partial = chain + k-1; |
| /* |
| * If the branch acquired continuation since we've looked at it - |
| * fine, it should all survive and (new) top doesn't belong to us. |
| */ |
| if (!partial->key && *partial->p) |
| /* Writer: end */ |
| goto no_top; |
| for (p = partial; (p > chain) && all_zeroes((__le32 *) p->bh->b_data, p->p); p--) |
| ; |
| /* |
| * OK, we've found the last block that must survive. The rest of our |
| * branch should be detached before unlocking. However, if that rest |
| * of branch is all ours and does not grow immediately from the inode |
| * it's easier to cheat and just decrement partial->p. |
| */ |
| if (p == chain + k - 1 && p > chain) { |
| p->p--; |
| } else { |
| *top = *p->p; |
| /* Nope, don't do this in ext4. Must leave the tree intact */ |
| #if 0 |
| *p->p = 0; |
| #endif |
| } |
| /* Writer: end */ |
| |
| while (partial > p) { |
| brelse(partial->bh); |
| partial--; |
| } |
| no_top: |
| return partial; |
| } |
| |
| /* |
| * Zero a number of block pointers in either an inode or an indirect block. |
| * If we restart the transaction we must again get write access to the |
| * indirect block for further modification. |
| * |
| * We release `count' blocks on disk, but (last - first) may be greater |
| * than `count' because there can be holes in there. |
| * |
| * Return 0 on success, 1 on invalid block range |
| * and < 0 on fatal error. |
| */ |
| static int ext4_clear_blocks(handle_t *handle, struct inode *inode, |
| struct buffer_head *bh, |
| ext4_fsblk_t block_to_free, |
| unsigned long count, __le32 *first, |
| __le32 *last) |
| { |
| __le32 *p; |
| int flags = EXT4_FREE_BLOCKS_VALIDATED; |
| int err; |
| |
| if (S_ISDIR(inode->i_mode) || S_ISLNK(inode->i_mode) || |
| ext4_test_inode_flag(inode, EXT4_INODE_EA_INODE)) |
| flags |= EXT4_FREE_BLOCKS_FORGET | EXT4_FREE_BLOCKS_METADATA; |
| else if (ext4_should_journal_data(inode)) |
| flags |= EXT4_FREE_BLOCKS_FORGET; |
| |
| if (!ext4_data_block_valid(EXT4_SB(inode->i_sb), block_to_free, |
| count)) { |
| EXT4_ERROR_INODE(inode, "attempt to clear invalid " |
| "blocks %llu len %lu", |
| (unsigned long long) block_to_free, count); |
| return 1; |
| } |
| |
| err = ext4_ind_truncate_ensure_credits(handle, inode, bh, |
| ext4_free_data_revoke_credits(inode, count)); |
| if (err < 0) |
| goto out_err; |
| |
| for (p = first; p < last; p++) |
| *p = 0; |
| |
| ext4_free_blocks(handle, inode, NULL, block_to_free, count, flags); |
| return 0; |
| out_err: |
| ext4_std_error(inode->i_sb, err); |
| return err; |
| } |
| |
| /** |
| * ext4_free_data - free a list of data blocks |
| * @handle: handle for this transaction |
| * @inode: inode we are dealing with |
| * @this_bh: indirect buffer_head which contains *@first and *@last |
| * @first: array of block numbers |
| * @last: points immediately past the end of array |
| * |
| * We are freeing all blocks referred from that array (numbers are stored as |
| * little-endian 32-bit) and updating @inode->i_blocks appropriately. |
| * |
| * We accumulate contiguous runs of blocks to free. Conveniently, if these |
| * blocks are contiguous then releasing them at one time will only affect one |
| * or two bitmap blocks (+ group descriptor(s) and superblock) and we won't |
| * actually use a lot of journal space. |
| * |
| * @this_bh will be %NULL if @first and @last point into the inode's direct |
| * block pointers. |
| */ |
| static void ext4_free_data(handle_t *handle, struct inode *inode, |
| struct buffer_head *this_bh, |
| __le32 *first, __le32 *last) |
| { |
| ext4_fsblk_t block_to_free = 0; /* Starting block # of a run */ |
| unsigned long count = 0; /* Number of blocks in the run */ |
| __le32 *block_to_free_p = NULL; /* Pointer into inode/ind |
| corresponding to |
| block_to_free */ |
| ext4_fsblk_t nr; /* Current block # */ |
| __le32 *p; /* Pointer into inode/ind |
| for current block */ |
| int err = 0; |
| |
| if (this_bh) { /* For indirect block */ |
| BUFFER_TRACE(this_bh, "get_write_access"); |
| err = ext4_journal_get_write_access(handle, this_bh); |
| /* Important: if we can't update the indirect pointers |
| * to the blocks, we can't free them. */ |
| if (err) |
| return; |
| } |
| |
| for (p = first; p < last; p++) { |
| nr = le32_to_cpu(*p); |
| if (nr) { |
| /* accumulate blocks to free if they're contiguous */ |
| if (count == 0) { |
| block_to_free = nr; |
| block_to_free_p = p; |
| count = 1; |
| } else if (nr == block_to_free + count) { |
| count++; |
| } else { |
| err = ext4_clear_blocks(handle, inode, this_bh, |
| block_to_free, count, |
| block_to_free_p, p); |
| if (err) |
| break; |
| block_to_free = nr; |
| block_to_free_p = p; |
| count = 1; |
| } |
| } |
| } |
| |
| if (!err && count > 0) |
| err = ext4_clear_blocks(handle, inode, this_bh, block_to_free, |
| count, block_to_free_p, p); |
| if (err < 0) |
| /* fatal error */ |
| return; |
| |
| if (this_bh) { |
| BUFFER_TRACE(this_bh, "call ext4_handle_dirty_metadata"); |
| |
| /* |
| * The buffer head should have an attached journal head at this |
| * point. However, if the data is corrupted and an indirect |
| * block pointed to itself, it would have been detached when |
| * the block was cleared. Check for this instead of OOPSing. |
| */ |
| if ((EXT4_JOURNAL(inode) == NULL) || bh2jh(this_bh)) |
| ext4_handle_dirty_metadata(handle, inode, this_bh); |
| else |
| EXT4_ERROR_INODE(inode, |
| "circular indirect block detected at " |
| "block %llu", |
| (unsigned long long) this_bh->b_blocknr); |
| } |
| } |
| |
| /** |
| * ext4_free_branches - free an array of branches |
| * @handle: JBD handle for this transaction |
| * @inode: inode we are dealing with |
| * @parent_bh: the buffer_head which contains *@first and *@last |
| * @first: array of block numbers |
| * @last: pointer immediately past the end of array |
| * @depth: depth of the branches to free |
| * |
| * We are freeing all blocks referred from these branches (numbers are |
| * stored as little-endian 32-bit) and updating @inode->i_blocks |
| * appropriately. |
| */ |
| static void ext4_free_branches(handle_t *handle, struct inode *inode, |
| struct buffer_head *parent_bh, |
| __le32 *first, __le32 *last, int depth) |
| { |
| ext4_fsblk_t nr; |
| __le32 *p; |
| |
| if (ext4_handle_is_aborted(handle)) |
| return; |
| |
| if (depth--) { |
| struct buffer_head *bh; |
| int addr_per_block = EXT4_ADDR_PER_BLOCK(inode->i_sb); |
| p = last; |
| while (--p >= first) { |
| nr = le32_to_cpu(*p); |
| if (!nr) |
| continue; /* A hole */ |
| |
| if (!ext4_data_block_valid(EXT4_SB(inode->i_sb), |
| nr, 1)) { |
| EXT4_ERROR_INODE(inode, |
| "invalid indirect mapped " |
| "block %lu (level %d)", |
| (unsigned long) nr, depth); |
| break; |
| } |
| |
| /* Go read the buffer for the next level down */ |
| bh = sb_bread(inode->i_sb, nr); |
| |
| /* |
| * A read failure? Report error and clear slot |
| * (should be rare). |
| */ |
| if (!bh) { |
| EXT4_ERROR_INODE_BLOCK(inode, nr, |
| "Read failure"); |
| continue; |
| } |
| |
| /* This zaps the entire block. Bottom up. */ |
| BUFFER_TRACE(bh, "free child branches"); |
| ext4_free_branches(handle, inode, bh, |
| (__le32 *) bh->b_data, |
| (__le32 *) bh->b_data + addr_per_block, |
| depth); |
| brelse(bh); |
| |
| /* |
| * Everything below this this pointer has been |
| * released. Now let this top-of-subtree go. |
| * |
| * We want the freeing of this indirect block to be |
| * atomic in the journal with the updating of the |
| * bitmap block which owns it. So make some room in |
| * the journal. |
| * |
| * We zero the parent pointer *after* freeing its |
| * pointee in the bitmaps, so if extend_transaction() |
| * for some reason fails to put the bitmap changes and |
| * the release into the same transaction, recovery |
| * will merely complain about releasing a free block, |
| * rather than leaking blocks. |
| */ |
| if (ext4_handle_is_aborted(handle)) |
| return; |
| if (ext4_ind_truncate_ensure_credits(handle, inode, |
| NULL, |
| ext4_free_metadata_revoke_credits( |
| inode->i_sb, 1)) < 0) |
| return; |
| |
| /* |
| * The forget flag here is critical because if |
| * we are journaling (and not doing data |
| * journaling), we have to make sure a revoke |
| * record is written to prevent the journal |
| * replay from overwriting the (former) |
| * indirect block if it gets reallocated as a |
| * data block. This must happen in the same |
| * transaction where the data blocks are |
| * actually freed. |
| */ |
| ext4_free_blocks(handle, inode, NULL, nr, 1, |
| EXT4_FREE_BLOCKS_METADATA| |
| EXT4_FREE_BLOCKS_FORGET); |
| |
| if (parent_bh) { |
| /* |
| * The block which we have just freed is |
| * pointed to by an indirect block: journal it |
| */ |
| BUFFER_TRACE(parent_bh, "get_write_access"); |
| if (!ext4_journal_get_write_access(handle, |
| parent_bh)){ |
| *p = 0; |
| BUFFER_TRACE(parent_bh, |
| "call ext4_handle_dirty_metadata"); |
| ext4_handle_dirty_metadata(handle, |
| inode, |
| parent_bh); |
| } |
| } |
| } |
| } else { |
| /* We have reached the bottom of the tree. */ |
| BUFFER_TRACE(parent_bh, "free data blocks"); |
| ext4_free_data(handle, inode, parent_bh, first, last); |
| } |
| } |
| |
| void ext4_ind_truncate(handle_t *handle, struct inode *inode) |
| { |
| struct ext4_inode_info *ei = EXT4_I(inode); |
| __le32 *i_data = ei->i_data; |
| int addr_per_block = EXT4_ADDR_PER_BLOCK(inode->i_sb); |
| ext4_lblk_t offsets[4]; |
| Indirect chain[4]; |
| Indirect *partial; |
| __le32 nr = 0; |
| int n = 0; |
| ext4_lblk_t last_block, max_block; |
| unsigned blocksize = inode->i_sb->s_blocksize; |
| |
| last_block = (inode->i_size + blocksize-1) |
| >> EXT4_BLOCK_SIZE_BITS(inode->i_sb); |
| max_block = (EXT4_SB(inode->i_sb)->s_bitmap_maxbytes + blocksize-1) |
| >> EXT4_BLOCK_SIZE_BITS(inode->i_sb); |
| |
| if (last_block != max_block) { |
| n = ext4_block_to_path(inode, last_block, offsets, NULL); |
| if (n == 0) |
| return; |
| } |
| |
| ext4_es_remove_extent(inode, last_block, EXT_MAX_BLOCKS - last_block); |
| |
| /* |
| * The orphan list entry will now protect us from any crash which |
| * occurs before the truncate completes, so it is now safe to propagate |
| * the new, shorter inode size (held for now in i_size) into the |
| * on-disk inode. We do this via i_disksize, which is the value which |
| * ext4 *really* writes onto the disk inode. |
| */ |
| ei->i_disksize = inode->i_size; |
| |
| if (last_block == max_block) { |
| /* |
| * It is unnecessary to free any data blocks if last_block is |
| * equal to the indirect block limit. |
| */ |
| return; |
| } else if (n == 1) { /* direct blocks */ |
| ext4_free_data(handle, inode, NULL, i_data+offsets[0], |
| i_data + EXT4_NDIR_BLOCKS); |
| goto do_indirects; |
| } |
| |
| partial = ext4_find_shared(inode, n, offsets, chain, &nr); |
| /* Kill the top of shared branch (not detached) */ |
| if (nr) { |
| if (partial == chain) { |
| /* Shared branch grows from the inode */ |
| ext4_free_branches(handle, inode, NULL, |
| &nr, &nr+1, (chain+n-1) - partial); |
| *partial->p = 0; |
| /* |
| * We mark the inode dirty prior to restart, |
| * and prior to stop. No need for it here. |
| */ |
| } else { |
| /* Shared branch grows from an indirect block */ |
| BUFFER_TRACE(partial->bh, "get_write_access"); |
| ext4_free_branches(handle, inode, partial->bh, |
| partial->p, |
| partial->p+1, (chain+n-1) - partial); |
| } |
| } |
| /* Clear the ends of indirect blocks on the shared branch */ |
| while (partial > chain) { |
| ext4_free_branches(handle, inode, partial->bh, partial->p + 1, |
| (__le32*)partial->bh->b_data+addr_per_block, |
| (chain+n-1) - partial); |
| BUFFER_TRACE(partial->bh, "call brelse"); |
| brelse(partial->bh); |
| partial--; |
| } |
| do_indirects: |
| /* Kill the remaining (whole) subtrees */ |
| switch (offsets[0]) { |
| default: |
| nr = i_data[EXT4_IND_BLOCK]; |
| if (nr) { |
| ext4_free_branches(handle, inode, NULL, &nr, &nr+1, 1); |
| i_data[EXT4_IND_BLOCK] = 0; |
| } |
| /* fall through */ |
| case EXT4_IND_BLOCK: |
| nr = i_data[EXT4_DIND_BLOCK]; |
| if (nr) { |
| ext4_free_branches(handle, inode, NULL, &nr, &nr+1, 2); |
| i_data[EXT4_DIND_BLOCK] = 0; |
| } |
| /* fall through */ |
| case EXT4_DIND_BLOCK: |
| nr = i_data[EXT4_TIND_BLOCK]; |
| if (nr) { |
| ext4_free_branches(handle, inode, NULL, &nr, &nr+1, 3); |
| i_data[EXT4_TIND_BLOCK] = 0; |
| } |
| /* fall through */ |
| case EXT4_TIND_BLOCK: |
| ; |
| } |
| } |
| |
| /** |
| * ext4_ind_remove_space - remove space from the range |
| * @handle: JBD handle for this transaction |
| * @inode: inode we are dealing with |
| * @start: First block to remove |
| * @end: One block after the last block to remove (exclusive) |
| * |
| * Free the blocks in the defined range (end is exclusive endpoint of |
| * range). This is used by ext4_punch_hole(). |
| */ |
| int ext4_ind_remove_space(handle_t *handle, struct inode *inode, |
| ext4_lblk_t start, ext4_lblk_t end) |
| { |
| struct ext4_inode_info *ei = EXT4_I(inode); |
| __le32 *i_data = ei->i_data; |
| int addr_per_block = EXT4_ADDR_PER_BLOCK(inode->i_sb); |
| ext4_lblk_t offsets[4], offsets2[4]; |
| Indirect chain[4], chain2[4]; |
| Indirect *partial, *partial2; |
| Indirect *p = NULL, *p2 = NULL; |
| ext4_lblk_t max_block; |
| __le32 nr = 0, nr2 = 0; |
| int n = 0, n2 = 0; |
| unsigned blocksize = inode->i_sb->s_blocksize; |
| |
| max_block = (EXT4_SB(inode->i_sb)->s_bitmap_maxbytes + blocksize-1) |
| >> EXT4_BLOCK_SIZE_BITS(inode->i_sb); |
| if (end >= max_block) |
| end = max_block; |
| if ((start >= end) || (start > max_block)) |
| return 0; |
| |
| n = ext4_block_to_path(inode, start, offsets, NULL); |
| n2 = ext4_block_to_path(inode, end, offsets2, NULL); |
| |
| BUG_ON(n > n2); |
| |
| if ((n == 1) && (n == n2)) { |
| /* We're punching only within direct block range */ |
| ext4_free_data(handle, inode, NULL, i_data + offsets[0], |
| i_data + offsets2[0]); |
| return 0; |
| } else if (n2 > n) { |
| /* |
| * Start and end are on a different levels so we're going to |
| * free partial block at start, and partial block at end of |
| * the range. If there are some levels in between then |
| * do_indirects label will take care of that. |
| */ |
| |
| if (n == 1) { |
| /* |
| * Start is at the direct block level, free |
| * everything to the end of the level. |
| */ |
| ext4_free_data(handle, inode, NULL, i_data + offsets[0], |
| i_data + EXT4_NDIR_BLOCKS); |
| goto end_range; |
| } |
| |
| |
| partial = p = ext4_find_shared(inode, n, offsets, chain, &nr); |
| if (nr) { |
| if (partial == chain) { |
| /* Shared branch grows from the inode */ |
| ext4_free_branches(handle, inode, NULL, |
| &nr, &nr+1, (chain+n-1) - partial); |
| *partial->p = 0; |
| } else { |
| /* Shared branch grows from an indirect block */ |
| BUFFER_TRACE(partial->bh, "get_write_access"); |
| ext4_free_branches(handle, inode, partial->bh, |
| partial->p, |
| partial->p+1, (chain+n-1) - partial); |
| } |
| } |
| |
| /* |
| * Clear the ends of indirect blocks on the shared branch |
| * at the start of the range |
| */ |
| while (partial > chain) { |
| ext4_free_branches(handle, inode, partial->bh, |
| partial->p + 1, |
| (__le32 *)partial->bh->b_data+addr_per_block, |
| (chain+n-1) - partial); |
| partial--; |
| } |
| |
| end_range: |
| partial2 = p2 = ext4_find_shared(inode, n2, offsets2, chain2, &nr2); |
| if (nr2) { |
| if (partial2 == chain2) { |
| /* |
| * Remember, end is exclusive so here we're at |
| * the start of the next level we're not going |
| * to free. Everything was covered by the start |
| * of the range. |
| */ |
| goto do_indirects; |
| } |
| } else { |
| /* |
| * ext4_find_shared returns Indirect structure which |
| * points to the last element which should not be |
| * removed by truncate. But this is end of the range |
| * in punch_hole so we need to point to the next element |
| */ |
| partial2->p++; |
| } |
| |
| /* |
| * Clear the ends of indirect blocks on the shared branch |
| * at the end of the range |
| */ |
| while (partial2 > chain2) { |
| ext4_free_branches(handle, inode, partial2->bh, |
| (__le32 *)partial2->bh->b_data, |
| partial2->p, |
| (chain2+n2-1) - partial2); |
| partial2--; |
| } |
| goto do_indirects; |
| } |
| |
| /* Punch happened within the same level (n == n2) */ |
| partial = p = ext4_find_shared(inode, n, offsets, chain, &nr); |
| partial2 = p2 = ext4_find_shared(inode, n2, offsets2, chain2, &nr2); |
| |
| /* Free top, but only if partial2 isn't its subtree. */ |
| if (nr) { |
| int level = min(partial - chain, partial2 - chain2); |
| int i; |
| int subtree = 1; |
| |
| for (i = 0; i <= level; i++) { |
| if (offsets[i] != offsets2[i]) { |
| subtree = 0; |
| break; |
| } |
| } |
| |
| if (!subtree) { |
| if (partial == chain) { |
| /* Shared branch grows from the inode */ |
| ext4_free_branches(handle, inode, NULL, |
| &nr, &nr+1, |
| (chain+n-1) - partial); |
| *partial->p = 0; |
| } else { |
| /* Shared branch grows from an indirect block */ |
| BUFFER_TRACE(partial->bh, "get_write_access"); |
| ext4_free_branches(handle, inode, partial->bh, |
| partial->p, |
| partial->p+1, |
| (chain+n-1) - partial); |
| } |
| } |
| } |
| |
| if (!nr2) { |
| /* |
| * ext4_find_shared returns Indirect structure which |
| * points to the last element which should not be |
| * removed by truncate. But this is end of the range |
| * in punch_hole so we need to point to the next element |
| */ |
| partial2->p++; |
| } |
| |
| while (partial > chain || partial2 > chain2) { |
| int depth = (chain+n-1) - partial; |
| int depth2 = (chain2+n2-1) - partial2; |
| |
| if (partial > chain && partial2 > chain2 && |
| partial->bh->b_blocknr == partial2->bh->b_blocknr) { |
| /* |
| * We've converged on the same block. Clear the range, |
| * then we're done. |
| */ |
| ext4_free_branches(handle, inode, partial->bh, |
| partial->p + 1, |
| partial2->p, |
| (chain+n-1) - partial); |
| goto cleanup; |
| } |
| |
| /* |
| * The start and end partial branches may not be at the same |
| * level even though the punch happened within one level. So, we |
| * give them a chance to arrive at the same level, then walk |
| * them in step with each other until we converge on the same |
| * block. |
| */ |
| if (partial > chain && depth <= depth2) { |
| ext4_free_branches(handle, inode, partial->bh, |
| partial->p + 1, |
| (__le32 *)partial->bh->b_data+addr_per_block, |
| (chain+n-1) - partial); |
| partial--; |
| } |
| if (partial2 > chain2 && depth2 <= depth) { |
| ext4_free_branches(handle, inode, partial2->bh, |
| (__le32 *)partial2->bh->b_data, |
| partial2->p, |
| (chain2+n2-1) - partial2); |
| partial2--; |
| } |
| } |
| |
| cleanup: |
| while (p && p > chain) { |
| BUFFER_TRACE(p->bh, "call brelse"); |
| brelse(p->bh); |
| p--; |
| } |
| while (p2 && p2 > chain2) { |
| BUFFER_TRACE(p2->bh, "call brelse"); |
| brelse(p2->bh); |
| p2--; |
| } |
| return 0; |
| |
| do_indirects: |
| /* Kill the remaining (whole) subtrees */ |
| switch (offsets[0]) { |
| default: |
| if (++n >= n2) |
| break; |
| nr = i_data[EXT4_IND_BLOCK]; |
| if (nr) { |
| ext4_free_branches(handle, inode, NULL, &nr, &nr+1, 1); |
| i_data[EXT4_IND_BLOCK] = 0; |
| } |
| /* fall through */ |
| case EXT4_IND_BLOCK: |
| if (++n >= n2) |
| break; |
| nr = i_data[EXT4_DIND_BLOCK]; |
| if (nr) { |
| ext4_free_branches(handle, inode, NULL, &nr, &nr+1, 2); |
| i_data[EXT4_DIND_BLOCK] = 0; |
| } |
| /* fall through */ |
| case EXT4_DIND_BLOCK: |
| if (++n >= n2) |
| break; |
| nr = i_data[EXT4_TIND_BLOCK]; |
| if (nr) { |
| ext4_free_branches(handle, inode, NULL, &nr, &nr+1, 3); |
| i_data[EXT4_TIND_BLOCK] = 0; |
| } |
| /* fall through */ |
| case EXT4_TIND_BLOCK: |
| ; |
| } |
| goto cleanup; |
| } |